Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
Contract laboratory needed for light luminaire testing, preferably in Egypt.
Independent lab needed to review and evaluate some lighting fixtures that recently caught on fire / short-out and provide testing results and feedback.
We are building an LED lighting products testing laboratory following LM-79, LM-82, and ISTMT standards. We would appreciate assistance in confirming the equipment required to...
Electrical Laboratory needed to x-ray and/or de-cap a small number of integrated circuits (ICs) to diagnose the root cause of some electronic component failures in the wireles...
Independent testing facility needed to perform the LM-79 method for fixture testing using sphere and goniometer
Portable lighting and flashlight company needs Contract Laboratory for product safety testing of lights to be tested to ensure our customers safety. Testing things like over ...
Organization needs Electrical Laboratory for compliance testing of circuit elements used in Light Panels used at automotive events.
Power and Energy Company needs Laboratory for LED Lighting testing for the LM 79 Testing Report
Canada Certified Laboratories needed for acoustics testing of lamps/luminaries for the sound produced.
Electrical Compliance Laboratory needed for CSA and/or UL certification for lighting fixtures. Run safety tests and submit to UL or CSA. Must be a CSA or UL approved lab....
Electrical Company needs Laboratory for mosquito repellent testing for Lighting Bulb against mosquitos.
Lighting company needs laboratory for testing locking photocontrol to ANSI C136.10 Roadway And Area Lighting Equipment -Locking-Type Photocontrol Devices And Mating Receptacle...
ILAC/ISO 17025 Certified Testing laboratory needed for warning light testing to FMVSS108 Federal Motor Vehicle Safety Standard 108 (FMVSS 108) or SAE J595 Directional Flashing...
Electrical signage company needs Certification Laboratory for IEC certification of exit sign to the following testing requirements:
under the IEC 60598 standard here's the...
Electrical Laboratory needed for comparison study of 5 different HPS 600W bulbs for the following:
-Photometric
-CCT (k)
-Electrical
-Efficacy (lumens/watt)
-Horticult...
Laboratory needed for weathering testing of bamboo material utilized in light fixtures for exposure to all outdoor elements i.e. wind, rain, sun, etc. to determine the longev...
Safety Lighting Manufacturer needs component tested for multiple temperature and vibration conditions
Third-Party Laboratory needed for flashlight certifications on for lumens, etc.
LED Lights Company needs Industrial Laboratory for IP44, IP65, and IP66 certification of 4 types of light products:
1. Downlights
2. Linear Lights
3. Candle Lights
4. Bul...
Accredited Electrical Laboratory needed for IEC lighting ballast label durability test in accordance with ยง7.2 of IEC 61347-1 (2015 ed.) Standard Lamp controlgear - Part 1: Ge...
Retailer need Electrical Laboratory for performance evaluation of infrared incandescent bulbs with a series of confirmatory specification tests done on the bulbs. including t...
LONG-TERM Third-Party Laboratory needed for star rating of LED bulbs under IS 16102-1: Self - Ballasted LED Lamps for General Lighting Services, Part 1: Safety Requirements
Third-Party Laboratory needed for UL testing of Photovoltaic panels to UL2703 Standard for Mounting Systems, Mounting Devices, Clamping/Retention Devices, and Ground Lugs for ...
Industrial Laboratory needed for the testing for strobe lighting used for emergency services to the following Test Methods SAE J595, SAE J845, CALIFORNIA table
Performance Laboratory needed for ANSI testing of a flashlight to ANSI/PLATO FL1, Flashlight Performance Guidelines. We need light output levels tested, impact resistance test...
Laboratory needed to do benchmark/comparison testing of patio lamp fuels. We would like to test/video a number of patio lamps simultaneously, videoing the overall burn time, ...
Industrial Laboratory needed for vibration testing required as per IS 11037 Electronic type fan regulators including Clause no 9.3.13.4:
Sweep frequency range 10 to 150HZ.
...
Industrial Laboratory needed for testing and evaluation of automotive lighting systems, lamps and mirrors. This testing includes assisting in the development of company's own...
Lighting Manufacturer needs Consumer Products Laboratory for UL Certification Testing for chandelier. All components and wires and sockets are UL but we need a certificate for...
Lighting Manufacturer needs Laboratory for SAE candela measurements testing to SAE J845 Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles
Laboratory needed for measuring the light intensity of infrared glowsticks that are used by the military and police.
Polymers Laboratory needed for conducting an environmental simulation study on polycarbonate headlight lens of an led headlight for freezing rain and snow. to see if the snow ...
Electrical Laboratory needed that is accredited to test in accordance to IEC 62287-1 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equim...
Independent, Third-Party Laboratory needed for LED lighting performance comparison study for a couple of LED lighting products in order to make a quality decision between two ...
Accredited laboratory recognized by certifying bodies needed for ANSI testing of metal halide quartz lamp to determine if it fullfills the demands for O-rating according to A...
Physical laboratory needed for basic drop/vibration ISTA testing of a lamp packaging in single parcel - 16.
Electrical laboratory needed for comparison study of two light products for distribution of light, light intensity, and energy output.
ISO laboratory for full electrical testing of LED , street lights and flood lights .
LONG-TERM TESTING Lighting manufacturer needs physical laboratory for SAE and NFPA certification testing of LED lighting products to SAE J595, SAE J845, California Title 13, ...
Large lighting company needs electrical laboratory for high voltage (10-12 kV) electrical fast transient testing.
Contract laboratory needed for accelerated product life testing on turnkey automation and lighting solutions used in hospitality industry.
Materials laboratory needed for ANSI Testing of LED Smart Film products to meet welding filter requirements of ANSI Z87.1-2015 table 6, American National Standard for Occupat...
LONG-TERM TESTING Manufacturer needs Aerospace laboratory for FAA Testing of air field lighting transformers.
Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to SAE J845 Class 1 . Recomm...
Automotive laboratory needed for SAE testing of a device and components to SAE J575, Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in ...
Electrical laboratory needed for full scale testing of a LED light panel.
Materials Laboratory needed for optical testing of light diffuser sheet for Optical characteristics.
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests