Laboratory Outsourcing and Scientific Sourcing Center

We need to test valves with low-pressure air to calculate pressure losses. Pressure from 5 mbar to 100 mbar; size from 1 to 4.

A global pipes, valves, and fittings (PVF) distributor's client needs 46 gas sample bottles but did not provide much information (other than they get them from Maxxam)
We (th...

Independent Regulatory Consultant needed in medical devices on the following :
- ISO 11737-1 and 2 (Sterilization of health care products)
- ISO 10993 (Biological evaluation...

Contract Laboratory needed for ASTM Testing of PFA(Perfluoroalkoxy) Lined Sight Glass according to ASTM F1545 (Standard Specification for. Plastic-Lined Ferrous Metal Pipe, F...

Contract Laboratory needed for flow testing to determine the Cv value for a valve.
To do this you would need to measure the pressure drop across the valve when flowing approx...

MULTIPLE TESTING
University Researcher needs Contract Laboratory for ASTM antioxidant levels testing of PEX pipe as per ASTM D3895 (Standard Test Method for Oxidative-Induct...

Contract Chemistry Laboratory needed for ion chromatography testing of Fluoride in 36% HCl with detection limit near 0.2ppm.

Sustainability Building Company needs ISO permeability testing of multilayer pipes according to the following ISO Testing Standards:
1. SCOPE: ISO 21003-2:2008, Multilayer pi...

MULTIPLE PRODUCTS
MULTIPLE TESTING
Materials Laboratory needed for 2 steel pipes testing for physical properties with 8 and 11 mm of internal and external diameter. Is this ...

PRODUCT DEVELOPMENT
MULTIPLE PRODUCTS
MULTIPLE TESTING
Contract Laboratory needed for a multiple of flexible line prototype testing requirements involving exposure to sour ...

MULTIPLE TESTING
USA Contract Laboratory needed for life expectancy and structural integrity of section of copper pipe taken from a structure we may be acquiring. Upon first ...

Drainage Company needs Contract Laboratory to evaluate the limited oxygen index between 3 different samples to evaluate the impact of our formulation change in regards to fla...

EUROPE LABORATORY
MULTIPLE PRODUCTS
Europe Contract Laboratory needed for rubber gasket testing for gaskets used for pipe lines in Drinking water and waste water.

Por medio de la presente solicito una cotización para evaluar Coeficiente de deslizamiento y Un producto Poliuretano en base a la Norma AWWA C222 Polyurethane Coatings for the...

Railway and RDSO approved Laboratory needed for ASTM F 1387 Double Ferrule Tube Fitting Testing

ASIA LABORATORY
Asia Mechanical Laboratory needed for ASTM rotary testing for 1/4, 3/8, 1/2, 3/4, 1 to ASTM 1387 Standard Specification for Performance of Piping and Tubin...

Mechanical Laboratory needed for zerk fittings quality control hardness testing. The print calls for a microhardness spec and the vendor claims in-spec according to the print....

Contract Laboratory needed for ASTM D2992 Standard Practice For Obtaining Hydrostatic Or Pressure Design Basis For "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pi...

NEW PRODUCT TESTING
Contract Laboratory needed for testing water substitute for water pipes . This product intended to be put into water pipes instead of water and the smoke ...

Contract Laboratory needed for hubless pipe internal epoxy coating testing in compliance with EN 877 Cast iron pipes and fittings, their joints and accessories for the evacuat...

USA LABORATORY
MULTIPLE TESTS
MULTIPLE PRODUCTS
Contract Laboratory needed for ASTM Comparison Testing on fittings to ASTM F1387 on two types of fittings. .

Manufacturer needs Laboratory NF water taps certification

USA LABORATORY
NEW PRODUCT DEVELOPMENT
MULTIPLE TESTS
USA Physical Contract Laboratory needed for evaluation testing of new design liquid flowmeter. For the evaluation, th...

Tube Fitting performace testing as per ASTM F1387

Contract Laboratory needed for AASHTO testing of polyethylene pipe testing in compliance with Alabama DOT and the following AASHTO Test Standards:

AASHTO M-326 Standard Spe...

Contract Laboratory needed for quality testing of Copper Nipples to find its strength, durability and the pressure rating.

Food Company needs Materials Laboratory for ASTM Oxygen transmission rate for Flexible foil according to ASTM D 3965 Standard Classification System and Basis for Specification...

Accredited laboratory need to perform PVC fitting testing in compliance with requirements of ES BN 1329-1:2014 Plastics Piping Systems For Soil And Waste Discharge (Low And H...

Mechanical Laboratory needed for ASTM Testing of double ferrule compression fitting for pipe/tube connecting to ASTM F1387(2012) Standard Specification For Performance Of Pipi...

Industrial Laboratory needed for ASTM tubes and pipe fittings testing to ASTM F 1387 test certification for my instrumentation fittings (Tube & Pipe fittings)

Middle East Plastics company needed for plastics laboratory for PVC and PPR Pipe testing for ISO International Certification

Materials Laboratory needed for ASTM Testing of Plastic Mechanical Fittings for use on outside diameter controlled Polyethylene gas distribution pipe and tubings ASTM F1924

USA Laboratory needed for Mechanical load testing of a pipe/tube clamping device to measure and calibrate clamping force of the device.

Asia Physical Laboratory needed for RCA Certificate Testing under Code of Practice GU01 Approval of flexible gas tubing for Low Pressure Applications

Pump manufacturer needs Electrical Laboratory for EMC Testing of u-PVC column pipe

India Mechanical Laboratory needed for ASTM Materials Testing of UPVC Pipe & Fitting ASTM D 1785 M Q Plan Test

Manufacturer of PVC Conduits Pipes and fittings , needs approved laboratory for materials testing: British Standard tests in the British Standard BS 6099 Part1 , BS 6099 Part ...

South Africa Laboratory needed for ISO testing to ISO 2531, Ductile iron pipes, fittings, accessories and their joints for water applications hydrostatic pressure testing of ...

NE USA Physical Laboratory needed for ASME Hydrostatic burst test to ASME Section VIII, Div. 1, UG-101, of multiple aluminum valves, flanges, and pipe fittings.

Middle East or Europe ASTM Materials Laboratory needed to test pre-insulated pipes and fittings (PU BASED) catering to district cooling and heating application and oil and gas...