Laboratory Outsourcing and Scientific Sourcing Center

We would like to receive a quote and lead time on performing a dielectric strength test on an epoxy resin in two different colors (neutral & black) per ASTM D149. Let us k...

We need to identify the material composition and type of a sample of translucent 1/4-inch plastic water supply tubing, perhaps using FTIR and Oxidative Induction Times (OIT).&...

MULTIPLE TESTING & PRODUCTS

LONG TERM

BUDGET APPROVED ($25,000-$50,000)

I need a certified lab to verify my chemical inventory's compliance with their res...

Looking for extractables testing on an Acrylic-based adhesive classified as a food contact material according to 21 CFR 175.300 (Resinous and polymeric coatings)

MULTIPLE TESTING

We’re working on a long-term medical implant and need expertise in material characterization and process development. We’re investigating non-invasiv...

Need soft plastic material fishing lure samples tested for % reflectance in the visible and UV spectrum.

Need to run a short QUV comparison between three samples for accelerated weathering testing - roughly 150 to 250 hours. 

Need certified polycarbonate (PC) and polyethersulphone (PES) calibration kits for Dynamic Mechanical Analysis (DMA). Do you sell such products?

Polymer Laboratory needed for small scale (gram) testing of suitability of mono ethylene glycol for polyester (PET) polymer synthesis to establish if MEG quality is sufficien...

Looking to sell various lab glassware, cabinets, etc., from our lab which is no longer in service. We're in the Bedford Park area by Midway Airport, IL. Please let us know if ...

MULTIPLE TESTING

We are looking for US FDA food-contact plastic risk assessment, migration modeling, and analysis for food-contact plastic colorants (dyes & pig...

MULTIPLE TESTING & SAMPLES

LONG TERM

We need to analyze the chemical composition of selected PVC conduit pipe samples in Delhi / India.

Our primary objective...

LONG TERM

Need ester content (purity by GC) on a sample of Tris (2-Ethylhexyl) Trimellitate) or TOTM (plasticizer).

Looking to buy plastic samples with a known yellowness after artificial weathering to use as quality control. Is this something you offer or can point me in the right directio...

Need lab tubes and shipping supplies for a dialysis patient to have their path lab work done. We currently do not have lab tubes to help with the patient's request. Usually, t...

BUDGET APPROVED ($2,000-$5,000)

USA / WASHINGTON We need to match two paint samples to prove two vehicles collided. We need the turnround to be two weeks.

BUDGET APPROVED ($1,000-$2,000)

Looking to get molded High Impact Polystyrene (HIPS) parts tested for chemical contamination in Georgia / USA. We suspect some contami...

Laboratory needs Analytical Chemistry Laboratory for solvent testing of  redistilled solvent to explore solvent reclamation after rotary evaporation, to reduce waste output an...

URGENT

Looking for supplies to start a blood-drawing business and their costs.

Looking for a commercial kit for genotype screening for CYP2C9 metabolizing status. 

URGENT

EU Accredited industrial materials laboratory needed for polycarbonate sheet testing per Military SAE AMSP83310 standard (Plastic Sheet, Polycarbonate, Transpa...

MULTIPLE SAMPLES

USA Plastics laboratory needed for ASTM testing non-phthalate plastisol for conformance per ASTM D4236 (Standard Practice for Labeling Art Materials ...

MULTIPLE PRODUCTS

USA Plastics laboratory needed for testing LLDPE and LDPE repro pellets for extractables and Compliance with SVHC list of REACH, Directive 2011...

MULITPLE TESTING & SAMPLES

Plastics laboratory needed for testing polypropylene PP plaques per following standard tests:

- ASTM D3039 (Standard Test Method for ...

URGENT

MULTIPLE SAMPLES

BUDGET APPROVED ($1,000-$2,000)

USA Analytical material laboratory needed to measure fluorescence of polystyrene plastic labware s...

URGENT
MULTIPLE TESTING
CANADA Polymer Laboratory needed for testing dry-erase PET films to formulate a technical data sheet. The product is an adaptive surface used on whi...

MULTIPLE SAMPLES & TESTING
MULTIPLE PRODUCTS
LONG-TERM
NEW DELHI / INDIA ISO/IEC 17025:2017 polymer testing facility needed for chemical and mechanical testing of plastics.

URGENT
LONG-TERM
MASSACHUSETTS / USA Plastic and polymer testing laboratory needed for Oxygen Transmission Rate (OTR) testing 3D printer plastic films according to ASTM D398...

MULTIPLE TESTING & SAMPLES
Third-party material testing facility needed for testing a plastic injection molded part per the Design Verification Plan and Report (DVP&R). Test ...

URGENT
USA Contract Laboratory needed for skin Irritation testing services for a blow-molded plastic arm support used in medical imaging.
I look forward to the details, Info...

MULTIPLE TESTING
UK Contract Laboratory needed for ISO and ASTM comparison testing to compare different carbon fiber laminate parts for vibration damping. We looked at 3 pot...

MULTIPLE TESTING & PRODUCTS
Third-party polymer testing laboratory needed for testing PET chips and yarn for the following properties:
- %DEG
- C-OOH Group: Carboxyl End Gr...

MULTIPLE TESTING
MULTIPLE PRODUCTS
BUDGET APPROVED ($5,000-$10,000)
Polymer Laboratory needed to analyze both hot-washed and cold-washed PET flakes.
Fields:
- Intrinsic V...

MULTIPLE SAMPLES
Contract polymer testing lab needed for intrinsic viscosity (IV) testing for three samples of PET (polyethylene terephthalate) regrind flakes.
Could you ki...

MULTIPLE SAMPLES & TESTING
LONG-TERM
HUNGARY / EUROPE Contract polymer testing laboratory needed for assessing recycled PET (polyester chips) according to EN 15343 (Use of R...

Looking for a contract lab to perform ASTM D2396−94 (Powder-Mix Time of PVC Resins Using a Torque Rheometer) on various recipes of PVC resins and plasticizers.

Contract Laboratory needed to test fluorescence intensity from PET film samples.

URGENT
MULTIPLE PRODUCTS
BUDGET APPROVED ($5,000-$10,000)
ISO 17025 contract GPC/HPLC testing facility needed for the following tests on RPET/PET/PBT yarns and chips. Also,...

URGENT
MULTIPLE SAMPLES
UAE Intrinsic viscosity testing needed for some six Polyethylene Terephthalate (PET) samples.
Please advise your feasibility with best possible quot...

MULTIPLE SAMPLES
Contract laboratory needed for testing air leakages in paint-cured film per the CSA N287.2-17 section 8.6.2 (Material requirements for concrete containment s...

MULTIPLE TESTING
MULTIPLE SAMPLES
Third-party plastics and polymer testing laboratory needed for ASTM testing HDPE (High-Density Polyethylene) raw material in Poland, Sweden...

MULTIPLE SAMPLES
Plastics and polymer testing laboratory needed for testing air and dust samples for Bisphenol-A (BPA) using HPLC. I would like to know the cost of service, s...

SINGAPORE Third-party polymer testing facility needed for testing two samples of plastic material per the ASTM standards.
In compliance with ISO 799-1:2019(E) 4.5, the plasti...

URGENT
USA Polymer Laboratory needed for determining thumbprint of properties of a plastic sample to reverse engineer/recreate per military standards.

Contract Laboratories needed for microplastics testing.

BUDGET APPROVED ($1,000-$2,000)
USA third-party material testing facility needed to conduct gel time test on a resin sample.

LEGAL
Contract laboratory needed to assess the degree of force necessary to damage the internal components of completed assembly of a plastic razor without causing visible da...

Contract Laboratory needed for Granular Virgin PTFE Resin/ Sheet testing to 3-A Sanitary Standard for Multiple-Use Plastic Materials Test.
Test will cover:
a) Cleanability R...