What can we help you with?
Contract Laboratory has received the following personal protection equipment (ppe) Laboratory Requests which need to be fulfilled! These personal protection equipment (ppe) Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their personal protection equipment (ppe) Laboratory and Scientific Research. If you need a personal protection equipment (ppe) Laboratory, please Submit a personal protection equipment (ppe) Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
Reusable Surgical Medical Equipment
Medical Device Laboratory needed for ISO and AAMI Testing for verification and validation of cleanliness requirement for reusable surgical medical equ... View More
Seat Belt Failure Investigation Examination
Mining Company needs Laboratory for failure analysis investigation of seat belt failure at one of their mines which caused the operator to fall out o... View More
Aerospace Company needs Laboratory for Explosive Atmosphere RTCA/DO-160G testing for section 9 equipment View More
India Automotive Laboratory needed for AIS Anti theft testing of keyset to AIS 075 Approval of Vehicles with regards to their protection against unaut... View More
Consumer Products Laboratory needed for assistance on development of testing for claims substantiation of a garment that could protect against lower ... View More
READY TO BUY Personal Trainer needs Food Laboratory for label confirmatory testing of protein powder to see if there are other ingredients in product... View More
ANSI Hi-Vis Safety Vest Certification Testing
Performance Laboratory needed for ANSI certification testing of Hi-Vis safety vest to ANSI/ISEA 107. Our target is ANSI Class 2 Type R. If you are ... View More
Consumer Food Nutritional Testing
INDIVIDUAL Consumer needs Food Laboratory needed for nutritional content (macro and micro nutrients) testing for personal use. View More
Phototherapy Mask Spectral Transmittance
Medical Device Safety Performance Laboratory needed for EN Spectral transmittance in the ultraviolet for phototherapy masks using the European Standar... View More
Plastics Degradation from Insect Repellents
North America GLP Environmental Laboratory needed for conducting studies of several EPA Registered insect repellent formulations to determine whether ... View More
Food Hand Sanitizer ASTM Antimicrobial Efficacy Studies
Personal hygiene productscompany needs NABL Accredited Microbiology Laboratory to study the ASTM antimicrobial efficacy of food compliant hand sanitiz... View More
Respiratory Monitoring Device Testing
FDA GMP Laboratory needed for ISO VOC, particulate, CO, CO2 and Ozone testing for respiratory monitoring device (dry gas pathway). View More
ASTM Condom Compatibility Testing
Medical Device Laboratory needed for ASTM Condom Testing to ASTM D7661-10 Standard Test Method for Determining Compatibility of Personal Lubricants wi... View More
ISO and IEC Dental Equipment Testing
Medical Device Laboratory needed for ISO and IEC testing of dental equipment on ISO 14457:2017 Dentistry -- Handpieces and motors , IEC 60601-1 Medica... View More
Active Pharmaceutical Ingredient API Product Development
PRODUCT DEVELOPMENT Pharmaceutical Laboratory needed Active Pharmaceutical Ingredient API examination of complex oil-in-water emulsion drug and the h... View More
Ground Enhancing Compound ASTM and IEC Testing
Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching tes... View More
Haircare Shampoos, Conditioners, Additives Testing
USA Consumer Products Laboratory needed for conducting independent accelerated package stability, physical, consumer labeling claims and microbiology ... View More
Mouthwash Microbiological Challenge Testing
Personalcare Products Company needs Microbiology Laboratory for antibacterial microbiological challenge testing for a new ingredient for mouthwash. Th... View More
Modified EP Method Testing for Tobramycin
Pharmaceutical Laboratory needed for EP Assay & Related substances of Tobramycin as per a modified EP monograph.
Please see specific equipment nee... View More
Toronto Laboratory Rental Space Needed
Medical Device Company would like to rent Canada laboratory space to rent foanimal electrophysiology research in Toronto, ON, Canada. We will provide ... View More
Protective Gear for Hi-Visibility. Garments
Large Motorcycle Company needs test facility who has the capabilities to perform testing on protective gear for hi-visibility. Garments will be tested... View More
United Kingdom Agriculture Pesticide Residues Testing
Tree Nurseries needs United Kingdom Agriculture Laboratory for air and surface pesticide residues (dust/droplets/vapours) are on the inside of the equ... View More
ISO Respiratory Medical Device Evaluation
Medical Device Laboratory needed for ISO evaluation of which medical device which comes under the respiratory devices category to ISO 5356 Anaesthe... View More
Initial Quoto perform UL 1069 Standard for Hospital Signaling and Nurse Call Equipment and UL 2560 Standard for Emergency Call Systems for Assisted Li... View More
IEC Interrupting Current of Clamp
Electrical Laboratory needed for IEC Testing of interrupting current of clamp for earthing set in accordance with IEC 61230 Live working - Portable eq... View More
IEC Lightning Protection Certification Testing
Company involved in the lightning protection and grounding business would like Electrical Laboratory for IEC 62561-1 Lightning protection system compo... View More
FDA GMP Personal Lubricant Laboratory Analyses
USA FDA GLP Medical Devices Laboratory needed for ASTM and USP personal lubricant testing for the following:
Osmolality USP<785>
Specifi... View More
Medical Equipment IEC Certification
ILAC accredited Laboratory needed for IEC Electrical Certification and EMC testing on two different types of Medical Equipment.
Monitor Pre-config... View More
Medical Device Laboratory needed ASTM compatibiity testing of lubricant with condom as per ASTM D7661-10 Standard Test Method for Determining Compati... View More
Active Pharmaceutical Ingredient API Method Development and Validation
FDA GMP Pharmaceutical Laboratory needed for development and validation of a CE-UV/ MS compatible method, for impurities determination (MS only as qua... View More
Pharmaceutical Containment Equipment Testing
Pharmaceutical Third-Party Laboratory needed to conduct on-site surrogate testing for containment equipment according to ISPE SMEPAC method guideline... View More
Petroleum Laboratory Equipment
Petroleum Laboratory needs Laboratory Supplier to provide a quote for the following equipment for their laboratory.
LIST OF REQUIRED EQUIPMENTS
S/... View More
Goat shin gloves (leather work gloves) with aramid Lining and TPR
URGENT urgently needs Laboratory for the following tests
1. ASTM F2992-15 - TDM for Cut resistance.
2. ASTM D3389-10 and D3884-09 for Abra... View More
IEC Medical Linear Accelerator
Electrical Laboratory needed for IEC testing of medical linear accelerator
according to IEC 60976 Medical electrical equipment - Medical electron ac... View More
UL / CSA Marine Onboard Battery Charger Evaluation
Electrical Laboratory needed for UL and CSA Testing of marine onboard battery charger to UL 1236 Standard for Battery Chargers for Charging Engine-Sta... View More
ASTM Condom Compatibility Testng
Medical Device Laboratory needed for ASTM condom compatibility testing to ASTM D7661-10 Standard Test Method for Determining Compatibility of Persona... View More
Tests according ISO 12944-1:2018-06 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective... View More
Complete Engineering Laboratory Set-Up
Laboratory Supplier needed that can provide the entire set of laboratory equipment for setting up a new engineering laboratory. View More
ANSI Personal Fall Arrest System Testing
Large Corporation needs Performance Laboratory for ANSI Safety Testing to ANSI/ASSE Z359 American National Standard Safety Requirements for Personal ... View More
Materials Laboratory needed for EN performance testing of fabric used in protective clothing to the following EN Standards: EN:11611 PROTECTION AGAINS... View More
IEC Lightning Protection System Components Evaluation
Electrical Laboratory needed for IEC Evaluation of Lightning protection system components (LPSC) to IEC 62561-7 Requirements for earthing enhancing co... View More
Electrostatiic Discharge Protection Jackets
LONG-TERM TESTING Laboratory needed for electrostatic discharge ESD testing on ESD protection jackets on a monthly basis.
View More
ASTM Permeation through Protective Clothing
Laboratory needed for ASTM Testing of a non-woven product to ASTM F739-07 Standard Test Method for Permeation of Liquids and Gases through Protective ... View More
ASTM Work Boot Performance Testing
Performance Laboratory needed for ASTM performance testing of work boot to ASTM F2413 Standard Specification for Performance Requirements for Foot Pro... View More
Medical Gown ANSI / AAMI and ASTM Testing
Materials Laboratory needed for ANSI, AAMI and ASTM Testing of medical protective gowns made out SMMS Material to ANSI/AAMIPB70 Liquid barrier perform... View More
IEC Garment High Voltage Environment Testing
Electrical Laboratory needed for IEC testing for garment use in high voltage environment according to 60895 © IEC:2002 numeral 6. View More
Medical Device Laboratory for ISO testing of transfusion sets to ISO1135-5 Transfusion equipment for medical use ? Part 5: Transfusion sets for singl... View More
Metal Alloys Chemical, Mechanical Properties and Mechanical Behavior
LONG-TERM TESTING Metals Laboratory needed to perform chemical composition, mechanical properties, and mechanical behavior tests on a variety of metal... View More
Environmental Laboratory Rental
Looking to rent an equipped laboratory space to perform soil testing.
Space is needed for the month of October, will be in use 2-3 times per week. W... View More
Third-Party Validation of Manufacturer's Specification
Life Science Laboratory needed for third-party validation testing (physical, microbiology, biological) of manufacturer's specifications of sterile per... View More
ISO Anti-Vibration Glove Testing
ISO / iEC 17025 Laboratory needed for ISO Anti-vibration glove test to ISO 10819 Mechanical vibration and shock -- Hand-arm vibration -- Measurement a... View More
IEC Design Testing of High Voltage Equipment
Electrical Laboratory needed for IEC design testing to IEC61109 of High Voltage Equipment insulators
View More
LONG-TERM TESTING Industrial Laboratory needed for evaluation of high-density polyethylene HDPE dust to get a report on flammability to determine the ... View More
Electrical Laboratory needed for SAE Certification testing to certify telematics products to SAE J1113 Electromagnetic Compatibility Measurement Proce... View More
Playground Safety Certification
Consumer Products Safety Laboratory needed for safety certification testing for playground equipment. View More
Medical Device Compatibility of Lubricants with Rubber Latex Condoms
Medical Device Laboratory needed for ASTM testing of personal lubricants compatibility with natural rubber latex, polyurethane and polyisoprene condo... View More
Laboratory needed for SAE testing of reflective wrap for harnesses and other applications. Need to test the thermal effectiveness per SAE J2302 Therma... View More
Gloves manufacturer needs Laboratory for ANSI puncture testing of glove for ANSI A7 and Puncture 5, View More
EN Earthing and Lightning Protection
Manufacturer needs laboratory for EN testing of earthing and lightning protection devices according to EN 62561:2017 Lightning protection system compo... View More
Manufacturing Unknown Powder Identification
Large food processor needs Analytical Chemistry Laboratory for identification testing of unknown powder sample collected from our equipment in out pr... View More
Safety Laboratory needed for ANSI / ISEA cut resistant testing of safety gloves to, ANSI / ISEA 105-2016, standards View More
Performance Laboratory needed for gym equipment testing for cycle testing and battery life. View More
Construction Safety Glass Testing
Safety Laboratory needed for ANSI/ ISEA testing of construction safety glasses to ANSI/ISEA Z87.1-2015 American National Standard for Occupational and... View More
Safety Laboratory needed for earplug Noise Reduction Rating testing compliant with ANSI STD S3.19-1974 for a new earplug design. Mean attenuation valu... View More
Company needs forensics laboratory for industrial hygiene investigation for heavy metals in a specific garment and respirator filter f View More
Safety Laboratory needed for ASTM testing of safety shoes to ASTM standards including (e.g. impact resistance, compression resistance).
View More
Analytical Chemistry Laboratory needed for 1,4 Dioxane for cosmetics & personal care products. View More
Antiperspirant Product Development
PRODUCT DEVELOPMENT Consumer Products Laboratory needed for deformulation, formulation, development and full chemical analysis of an antiperspirant pe... View More
Materials Laboratory needed for NFPA and ANSI testing of 3 different types of personal protective equipment and rescue equipment harnesses. to the fol... View More
Petrochemical Lab Construction
Architect / Consultant needed for assisting on design and equipment for Petrochemical Laboratory. View More
Personalcare Clinical Research Study
Clinical Research Laboratory needed for dermatology study on personalcare underpads.\ View More
Consumer Products Laboratory needed for the following Disposable Baby Diapers testing:
Leakage protection
Skin dryness
Skin friendliness
Handling
... View More
Medical Device Laboratory needed for ISO Testing on apparatus used on ventilator according to ISO 5356-1 Anaesthetic and respiratory equipment -- Con... View More
Independent Consumer Products Laboratory needed for yoga equipment testing including weight testing. Yoga equipment. includes carabiners, daisy chain... View More
IEC Compliance of Medical Electrical Equipment
Electrical Laboratory needed for IEC compliance testing to IEC 60601-2-47 Medical electrical equipment - Part 2-47: Particular requirements for the ba... View More
IEC Compliance of Lighting Protection System Evaluation
Industrial Laboratory required which can test earthing enhancing chemical compound as per IEC 62561-7 Lightning protection system components (LPSC) -... View More
Medical Device Laboratory needed to perform testing as per EN 13544-2 (Respiratory therapy equipment. Tubing and connectors)
- A.3 Test method Resis... View More
Drug Product Compatibility Testing
Pharmaceutical company needs Laboratory to perform ASTM condom compatibility testing of a drug product according to ASTM D7661-10 Standard Test Metho... View More
Medical Device Laboratory needed for ASTM Testing of personal lubricants for compatiability with natural rubber latex, polyurethane and synthetic cond... View More
Industrial Laboratory needed for testing and evaluation of automotive lighting systems, lamps and mirrors. This testing includes assisting in the dev... View More
SMEPAC / Surrogate Process Performance Study
Large Healthcare Company needs Pharmaceuticals Laboratory for SMEPAC/Surrogate powder test as part of performance testing of equipment. using lactose ... View More
Medical and Laboratory Equipment Manufacturer wishes to purchase a laboratory that sells and repairs equipment. View More
Manufacturer needs Consumer Products Laboratory for competitor comparison study of personalcare products for biodegradability, breathability, adhesive... View More
Consumer Products Laboratory needed for ASTM testing of new exercise equipment with resistance bands, clips for attachments and straps for safety and ... View More
LONG-TERM TESTING US Automotive Laboratory needed for vendor supplier confirmation cleaning testing of parts used in pumps and turbines to ensure part... View More
Heavy Equipment Company need Geology Laboratory for rare earth mineral analysis View More
Laboratory needs Contract Manufacturer to assemble kits for the NIH Taste Intensity Test which includes: gloves, 2 sterile cotton swabs, gloves (latex... View More
LONG-TERM Contract Sterilizer needed for sterilization of a range of measuring fragile medical equipment post contact with human tissue. Components mu... View More
Analytical Laboratory wishes to purchase an USA environmental Laboratory and/or all of their equipment. View More
LONG-TERM TESTING Large hospitality company needs food microbiology laboratory laboratory for monthly environmental monitoring microbial analysis of ... View More
Automotive Laboratory needed for safety, particulate emission and so2 and no2 testing of a device used in fuel tank of any vehicle or any equipment th... View More
Importer needs FDA cGMP Laboratory for FDA customs testing of intimate personal edible lubricant. View More
Electrical Laboratory needed that is accredited to test in accordance to IEC 62287-1 Maritime navigation and radiocommunication equipment and systems ... View More
Laboratory needed for Energy Star verification testing on Imaging Equipment View More
Infant sleep wear fabric testing for the consumer protection agency. View More
Electrical Certification Laboratory needed for NFPA certification testing of lineman's gloves to NFPA 70E, Standard for Electrical Safety in the Workp... View More
Medical Device Laboratory needed for ASTM compatibility testing of personal lubricant products to ASTM D7661-10 for compatibility with natural rubber ... View More
Physical Laboratory needed for nut chipping testing using SAE J400 equipment of non-wovens. View More
Electrical Laboratory needed for ASTM Testing of safety protection gloves to ASTM F2675 Standard Test Method for Determining Arc Ratings of Hand Prote... View More
Power equipment manufacturer needs Analytical Chemistry Laboratory to identify and quantify the species of organic and inorganic content contained in ... View More
FDA GLP certified or ISO 17025 Agriculture laboratory needed for insecticides, Fungicides, Acaricides and herbicides efficacy testing as per FAO Guide... View More
Laboratory Consultant needed for advising on the complete set-up of CLIA urine and blood toxicology laboratory including laboratory equipment and star... View More
Laboratory needed for water treatment equipment testing to NSF/ANSI 419 testing of ultrafiltration membrane module View More
Laboratory needed that can perform all individual testing for REACH registration of a personal care product specifically the analytical testing for p... View More
Medical device laboratory needed for physical testing of transfusion sets to the physical requirements of ISO 1135-4, Transfusion equipment for medica... View More
Mining company needs to purchase all available laboratory equipment for determining fumes and dust emitted to the atmosphere as a result of mining ope... View More
Start-up laboratory looking for assistance with purchasing laboratory equipment for a food testing and livestock diagnostic laboratory
View More
Microbiology laboratory for Coliform and CFU/Plate Count tests for 3-5 samples of frozen mix.
We are interested in pulling a daily sample to assess ... View More
Company interested in acquiring an analytical laboratory in Saudi Arabia for the testing for quality assurance, testing, inspection, and certification... View More
Analytical chemistry laboratory needed for confirmation testing of the ingredients in personalcare products. View More
Performance laboratory needed for ASTM and ISO testing of protective fabric used in coveralls to ASTM F2130, Standard Test Method for Measuring Repel... View More
Cosmetics laboratory needed to formulate a range of personal care and cosmetic products. View More
Automotive laboratory needed for ANSI testing of glazing materials (glass) to ANSI Z26.1, American National Standard
for Safety Glazing Materials
f... View More
Electrical laboratory needed for IEC testing to the following 6 IEC Standards: IEC 61000-4-9,Electromagnetic compatibility (EMC) , IEC 60529 Degrees o... View More
Electronics laboratory needed for compliance testing of telecom equipment to the Radio and Telecommunications Terminal Equipment Directive (R&TTE) R&T... View More
LONG-TERM TESTING Electrical laboratory needed for compliance testing of electrical grounding rods and accessories as per IEC 62561 standards, Lightni... View More
Construction materials laboratory needed for vinyl flooring testing to ANSI/ESD STM 7.1 Standard Test Method for the Protection of Electrostatic Disc... View More
Medical electrical laboratory needed for IEC testing of sterile electrosurgical products to IEC 60601-1, Medical electrical equipment - Part 1: Gener... View More
Power company needs electrical laboratory for IP ingress protection IP69K testing. View More
Consumer products microbiology laboratory needed for air purification and viral efficacy studies on personal plasma-ion based air purifier against H7N... View More
Medical Device laboratory needed for passive ligating clip medical implant testing to several ISO and IEC standards including:
F2052 Test Method fo... View More
Medical Device Laboratory needed for ASTM testing of condoms to ASTM D7661-10, Standard Test Method For Determining Compatibility of Personal Lubrican... View More
FDA cGMP Medical device laboratory needed for product safety and toxicology study testing of water based personal lubricant including
1) Condom bio... View More
Materials laboratory needed for determination of optical transmission characteristics of red plastic lens resin used in laser receiver products. Th... View More
ISO / IEC 17025 Accredited consumer product laboratory needed for safety equipment testing to EN and KS standards including:
Particle filter testing ... View More
Medical device / materials laboratory needed for ASTM testing of personal protective equipment / gloves to ASTMF2878-10 (Needle Stick Test) View More
URGENT TESTING: Large corporation needs industrial hygiene laboratory for equipment cleaning validation study testing using Texwipe TX751 to test for ... View More
University Researcher needs veterinary medicine laboratory needed for measuring fat soluble vitamin A and E levels in plasma and in milk samples on hi... View More
Electrical laboratory needed for inductor testing to AC + DC load life testing of three production lots
1 3 separate lots of 77pcs each
2 Chambe... View More
Cosmetics and Personal Care Products Manufacturer needs laboratory for microbiology and analytical chemistry testing of disinfectants / antiseptics / ... View More
Cosmetics laboratory needed for OECD 201 biodegradability testing of range of 10-20 natural liquid personal care products including shampoos, conditio... View More
Cosmetic microbiology laboratory needed for USP 51 preservative challenge testing, USP 61 microbial content / bioburden testing, and bacterial contami... View More
Laboratory equipment calibration and electrical safety maintenance testing. View More
Materials laboratory needed for ANSI Testing of LED Smart Film products to meet welding filter requirements of ANSI Z87.1-2015 table 6, American Nati... View More
Electrical laboratory needed for SAE external ignition testing of small marine electrical equipment for use in the marine industry to SAE J1171, Exter... View More
Electrical certification laboratory needed for SAE external ignition protection testing of a small electrical device for use in marine equipment to SA... View More
Performance Laboratory needed for fume hood type testing as per EN 145175 to American Society of Heating & Refrigeration & AC Engineering ASHARE 110 t... View More
Environmental simulation laboratory needed for UV weathering testing on equipment in compliance with IEC 60068-2-5:2010 Test Sa: Simulated solar radia... View More
Materials (textiles) laboratory needed for protective clothing testing to check the cut resistance of protective textiles to ASTM 2992 or F1790 using ... View More
Electrical communications laboratory needed for IEC 61537 Cl. 10.2-10.8 testing of cable tray and ladder systems with respect to the following:
1. ... View More
Pharmaceutical medical device laboratory needed for sperm motility testing of a personal lubricant according to ISO 10993-10. View More
RAPID TURN AROUND NEEDED. Microbiology laboratory needed for efficacy testing of a disinfectant used for sterilizing medical equipment. Quote needed. View More
Personal protective equipment laboratory needed for ASTM F2675 Arc Flash testing of a protective glove. Quote needed. View More
Electrical laboratory needed for lightning protection and corrosion testing of 5 kilograms of a liquid and solid. View More
EPA Environmental laboratory needed for dioxin testing of field equipment according to VOC EPA Method 24. View More
Automotive laboratory needed for SAE testing of a device and components to SAE J575, Test Methods and Equipment for Lighting Devices for Use on Vehic... View More
Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching tes... View More
Personal protection equipment (PPE) laboratory needed for ASTM F2992 cut resistance testing of a stainless steel mesh using a TDM-100 machine.
View More
Medical Device laboratory needed for ASTM and ISO product safety testing for evaluation of medical devices including toxicology, packaging and microbi... View More
Explosives laboratory needed for ISO testing of protective clothing for abrasive blasting to ISO 14877 View More
Materials laboratory needed for screw DIN Testing: 1) Screw Type: DIN7500 PE M3X8
Properties Class: 8.8
Surface protection: DIN EN ISO9227-NSS 360h
... View More
Calibration & Repair Services business of laboratory instruments for sale. Manufacturer certified service, Clients in the medical, pharma, food & indu... View More
Electrical laboratory needed for load testing in accordance with IEC 62561-5, Clause 5.2.2 Lightning protection system components (LPSC) - Part 5: Req... View More
Personal hygiene laboratory needed for testing tampons using an absorbency Syngina test. View More
Established environmental laboratory in Brazil would like to acquire environmental laboratory in Minnesota area as well as acquiring used lab equipmen... View More
Materials laboratory needed for DIN fastener cleanliness testing to Screw Type: DIN7500 PE M3X8Properties Class: 8.8Surface protection: DIN EN ISO9227... View More
Company looking to buy a going-out-of-business biotech company/lab. The deal shall be structured as assets (equipment) purchase + lease assumption. View More
FDA GLP Contract Research Organization needed for clinical trial: MODIFIED DRAIZE-95 TEST (skin toxicity) performed on 200 human individuals. View More
Biofuels company needs laboratory consulting firm needed for establishing a full petroleum engineering laboratory from design and equipment. View More
Electrical safety testing and calibration of lab equipment including laminar flow hood, centrifuge, etc. View More
Medical Device Laboratory for medical equipment verification testing of wheelchair, bed alarm sensor, and lift chair according to specifications.
... View More
LONG TERM TESTING: NABL and ISO/IEC 17025:2005.laboratory needed for osmolarity testing of personal lubricants View More
URGENT. FDA GMP Microbiology laboratory needed for RODAC AND TSA Settling Plate Testing with Promotion for TSA Rodac and TSA settle plates View More
Personalcare company needs consumer products laboratory for new product testing of soaps with future intent to manufacture shower gels, shampoo, body... View More
Personalcare company needs medical device laboratory for Health Canada Class ii tampon compliance testing prior to importation into Canada. View More
Electrical Laboratory needed for Ingress Protection IP69K testing for an electric motor for food industry View More
Urgent Need by Large UAE construction company for testing of foam materials per BS EN 13468 (Thermal insulating products for building equipment and in... View More
Third-Party Laboratory needed for Vibration test in accordance with standard ANSI C136.31 Standards for Roadway and Area Lighting Equipment, Luminair... View More
Building Supply company needs laboratory to test thermal insulating products for building equipment and industrial installations. Determination of tra... View More
Dental distribution company needs viral & bacterial (live/viable) analysis from wipe/swab samples. Analysis should include identification of specific... View More
Certification laboratory needed for BSMI certification testing of networking equipment. Please advise on 1.cost 2. lead time 3. what document we nee... View More
Microbiology Laboratory needed for Microbiological Testing for Personal care products i View More
Manufacturer needs laboratory for new product development testing of new coating to be used in the abatement of surfaces that contain lead based paint... View More
Consumer Product Laboratory needed for testing a Personal Care Product for contaminants: Glycerin needs to be evaluated for cause of hazing and color ... View More
Medical Device laboratory needed for Dental product testing of dental implants, abutments and surgical equipments. for drills- for radial run out, t... View More
Electrical laboratory needed for IEC certification testing for electrode holder, cable connector, and work clamp under IEC 60974, Arc welding equipmen... View More
Laboratory needed for certification of compliance to Type Testing to IEC 60974.13, Arc welding equipment - Part 13: Welding clamp View More
Electrical lab needed for: product safety requirements testing for equipment for electrical energy measurement and control. IEC and ANSI standards View More
Sports performance laboratory needed to have exercise equipment tested to current safety standards. View More
Materials laboratory needed for NATO coatings testing of chemical agent resistant coating (CARC) to North Atlantic Treaty Organization NATO AEP 64 sta... View More
Electrical laboratory needed for DIN Testing of a group of sensors as per DIN 40050-9 (IPX9K), Road vehicles; degrees of protection (IP-code); protect... View More
Materials Laboratory needed for ANSI Testing ofÂ
Latex Coated Multipurpose Work Glove to be ANSI rated for Cut and Abrasion Resistance as demonstrate... View More
Materials laboratory needed for surgical gowns testing
- NFPA Standards - Standards for the use of Inhalation Anesthetics.
- ASTM 1670, Standard ... View More
LONG-TERM TESTING Equipment manufacturer needs laboratory for swabbing and residue testing to detect presence of pharmaceuticals, chemicals, antibioti... View More
Large corporation needs electrical laboratory for Ingress Protection Testing of environmentally sealed toggle switch is capable of complying with Ing... View More
Laboratory needed for testing performance oriented products used in Automotive,personal care,agro,paint industries View More
Laboratory needed for Industry standards and safety testing for a piece of exercise equipment. No digital or electrical component to meet government a... View More
Cosmetics Clinical Research Facility needed for UVB protectio study on human subjects: A sun protection factor (SPF) of 30 or higher. Validation of th... View More
Electrical Laboratory needed for EMC Testing to DO 160 Environmental Conditions and Test Procedures for Airborne Equipment for aviation products. View More
Independent laboratory needed for construction protection board testing to a Canadian specification.. View More
Laboratory needed for study to determine the efficient method for determining amount of residual alcohol left over after sanitizing metal mixing equip... View More
USA Materials Laboratory needed for ANSI Testing for light transmission (A light) to ANSIZ26.1-1996, Safety Glazing Materials for Glazing Motor Vehicl... View More
Analytical chemistry laboratory needed for Osmolality testing for a personal lubricant product. View More
Industrial cleaning equipment company needs virology laboratory for Virucidal efficacy testing on Avian influenza virus (AIV),, H7N1Noroviruses, Aden... View More
Electrical laboratory needed for Ingress Protection Testing: IP tests for an outdoor enclosure
View More
Electrical Laboratory needed for Diagnostic Medical X-Ray equipment testing: Insulation Resistance test before & after Humidity condition as per BIS ... View More
Materials laboratory needed for ASTM Chemical degradation and permeation testing as per ASTM 739-12 for Industrial rubber gloves for 84 chemicals View More
Clinical Sports Performance laboratory needed for clinical biomechanical testing in humans to validate performance of university's sports biomechanics... View More
Asia Materials laboratory needed for ASTM Testing to ASTM F1671, Standard Test Method for Resistance of Materials Used in Protective Clothing to Penet... View More
Materials Laboratory needed for ANSI compliance testing of safety spectacles comply with ANSI/ISEA Z87.1:2015 standards for high-impact resistance. P... View More
Lighting company needs optical laboratory needed for spectral transmittance measurement services. on quartz glass tubing 26mm I.D x 32mm O.D. (3mm wa... View More
INDIA PHYSICAL LABORATORY NEEDD FOR AUTOMOTIVE SAFETY GLOVE TESTING: CUT RESISTANCE TO LEVEL 4 GLOVE (PPE'S) ABRASION RESISTANCE
BLADE CUT RESISTANCE... View More
Laboratory needed for testing of safety belts to ANSI 10.14, American National Standard for Construction and Demolition Operations - Requirements for ... View More
ISO 17025 Accredited Laboratory needed for Anti vibration glove testing according to ANSI/ASA S2.73 or ISO 10819, Mechanical vibration and shock - Ha... View More
Physical Laboratory needed stress testing done on chiropractic table equipment View More
FDA GMP Microbiology Laboratory needed for USP Microbiological testing (swab or contact plate) for cleaning validation of tools and equipment used in ... View More
University researcher in Plant Protection needs agriculture laboratory for water testing of water samples used for agricultural irrigation. Please pro... View More
START-UP Personalcare company needs Materials laboratory for Product Safety and GMO Testing of materials in tampons to understand if material is GMO ... View More
Contract Medical Device Laboratory needed for FDA Testing of endotracheal tubes (ETT) to FDA recognized standards.
? ISO 5356-1 (2015), Anaestheti... View More
Europe FDA Laboratory needed for personal lubricant testing to be in compliance for submission with the FDA. Please specify the price and how long it... View More
Contract Laboratory needed for film testing of UV400 Optical Film for UV protection and light transmission reflective, absorbtion and U Value View More
Mechanical Laboratory needed for ASME Testing to ASME PCC-2, Repair of Pressure Equipment and Piping View More
Performance laboratory needed for endurance testing for a 6 MVA transformer according to EN 50464-4, Three-phase oil-immersed distribution transformer... View More
Robotics Laboratory needed for development and evaluation studies of robotic equipment to ISO/TR 13309:1995 Manipulating industrial robots -- Informat... View More
COntract Laboratory needed for Sun Protection Factor SPF Testing by Transpore Tape Method, UV-A and UV-B protection both test are required. View More
Sports performance laboratory needed for certification testing of sports equipment that it is safe at preventing head injuries. View More
FDA Electrical medical device laboratory needed for Skin massager testing:
2. FDA Product Code : PBX
3. Performance test standard
? IEC 60601-1: M... View More
Consumer products company needed for personal lubricant testing to analyze ingredients in two of personal lubricants for:
Water
Sorbitol
Glycerin... View More
ILAC certified laboratory needed to perform testing of instruments and systems against IEC 60601-1-2, Medical electrical equipment - Part 1-2: Gen... View More
Consumer Products laboratory needed for certification testing for CE mark. compliance to the General Product Safety Directive of sports equipment. View More
Company developing new Organic and Natural product in the Baby personal, cleaning, food, diaper categories needs consumer products laboratory for thir... View More
Certification laboratory needed for National Fire Protection Assocation certification testing to certify a boot style to NFPA 1977 standard. View More
Consumer Products laboratory needed for certification testing for CE mark. compliance to the General Product Safety Directive of sports equipment. View More
Large oil company needs electrical laboratory for electrical compliance inspections. At our facility we use hot sticks, release hooks, and other equip... View More
Test Laboratory needed to perform filtration efficiency and pressure drop analysis on developmental media coupons. We prefer that a TSI 8130 be used f... View More
LEGAL California attorney needs textile laboratory for fire retardation / flammability testing of fabric used in shirt. Attorney who is thinking abo... View More
Accessory company needs consumer products testing for UV protection of fabrics used for headbands and 3 different fabrics. View More
Russia Materials Laboratory needed for ASTM Testing for determination of iodine adsorption - ASTM D1510-13
The lab must be accredited by a single nat... View More
Safety Laboratory needed for eye protection testing to ISO 4855-1981(E) Clauses 13 and 14 for eye protection. View More
Technology Laboratory needed for new panel design tests including theArc Resistant testsWe also need a Arc resistant test for a MCC, but for this MCC ... View More
Materials Laboratory needed for ANSI glove cut testing View More
Medical Technology laboratory needed for medical device testing to 60601-1 Medical electrical equipment?Part 1: General requirements for
basic safety... View More
Electrical Laboratory needed for testing of an electrothermic sensor according to the ECE R118 norm (fire protection) View More
Electrical Laboratory needed for Dimensional layout performed on Electonic board. Need to be advised as to what equipment would be used to perform th... View More
Personal care company needs consumer products laboratory for stability and sensory panel studies: Sensory panel evaluations for a new line of product... View More
University Researcher needs laboratory for Sports Equipment testing for a 24 kilonewton Load rating and certification including durability . Load rati... View More
Europe laboratory needed for aircraft battery testing to RTCA DO-160 standard, Environmental Conditions and Test Procedures for Airborne Equipment. View More
US Certification Laboratory needed to certify product to UL608, Standard for Safety for Burglary Resistant Vault Doors and Modular Panels and UL752 ... View More
Hong Kong laboratory needed for test equipment testing View More
Metrology Laboratory for genetic's laboratory site equipment inspection and certification to meet CAP/CLIA/AABB and ASCLD-LAB standards View More
India Pharmaceutical Science Researcher needs Pharmacology Contract Research Organization for Pharmacology Study Experiments:
AIM AND OBJECTIVES OF... View More
Independent researcher working on independent scientific research project involving Borrelia needs microbiology laboratory to prepare subcultures of... View More
Eastern Europe medical device laboratory needed for Personal Lubricant Ge testing. Two tests; 1) Condom compatibility test 2) Spermicid Test (Our prod... View More
United States Textile Laboratory needed for fabric testing for UPF protection to AATCC and ASMT testing methods: UPF Product Testing - AATCC 183, ASTM... View More
FDA GMP Biomedical laboratory needed for FDA testing of personal lubricants for 510k submissions Condom compatibility testing. View More
Coatings Company needs polymer lab that can test National Fire Protection Association NFPA via ASTM D6668. Standard Test Method for Discrimination B... View More
South Africa and/or Kenya Environmental Laboratory needed preparation of tender specifications for quantitative laboratory analysis of polychlorinated... View More
India polymer laboratory needed for quality control testing: Polypropylene sheet testing is required for judging its quality. we are planing to manuf... View More
Consumer Products Safety Laboratory needed for Simple safety assessment on 3 products to satisfy Amazon requirements. Laboratory needed that has dealt... View More
Materials Laboratory needed for certification testing of PIR Rigid cold insulation,
PIR (Polyisocynurate) foam segments are high-quality insulating ... View More
Midwest USA electronics laboratory needed for investigation testing to determine the cause of intermittent connectivity or electronic scanning equipm... View More
Cosmetics analytical chemistry laboratory needed to provide a Quotation for SPF (Sun protection Factor) testing in moisturizer View More
Clinical Laboratory needed for clinical testing to substantiate the claims of a toothpaste sample namely provides 12-hour cavity protection, fights ca... View More
Advanced Materials Laboratory needed for BSEN 62561 testing for lightning protection materials Thank you very much. View More
USA Materials Laboratory needed for Intermittent testing of 3 foam sample hardness over 30,60,90,120, and 150 wash cycles. Machine wash warm, tumble d... View More
ISO 17025 certified Laboratory needed for conducting some tests on new metal roof shingles that would be distributed to the US market. These certifica... View More
Mechanical Laboratories needed for ANSI Testing: Zero turn rotary blade lawn mower safety testing to ANSI/OPIE B71.10-2013, Off-Road Ground-Supported ... View More
Bioanalytical Laboratory needed to extract Collagen Type 2 proteins from Chicken Sternal Cartilage. This is a simple process but requires specific equ... View More
Microbiology laboratory needed for personalcare product testing of essential oil personalcare product in foiled sealed packages. Tests for Aroma, Text... View More
Europe environmental simulation laboratory needed with climatic chamber big enough to test pantograph for train according to EN50206-1 (According to E... View More
Florida electrical safety laboratory needed for shielding effectiveness of EMI Sheidling Equipment View More
Laboratory needed for alcohol content testing. The product is for personal consumption that I am in the process of trying to mass produce and get it o... View More
FDA GLP certification or ISO 17025 Agricultural agrochemical company needs agriculture laboratory for insecticides, Fungicides, Acaricides and herbic... View More
THird-Party Southern USA laboratory needed for longevity and reliability testing of fracturing pumps and components, in comparison with the correspond... View More
Canada Environmental Monitoring Laboratory needed for sanitation swab testing for packaging equipment View More
India EPA certified laboratory needed for EPA Efficacy Testing for a Bioremediation product. Product is used for Bioremediation of crude oil spills te... View More
Canada Packaging Laboratory needed Leak Vacuum Decay Testing on Canisters. As part of quality system, the seal qualification needs to be done before t... View More
California Bioanalytical Laboratory needed for Viscosity testing of a collagen based product. Testing needs to be performed on calibrated equipment tr... View More
USA Bioanalytical Laboratory needed for ELISA Testing of human chorionic gonadotropin (hCG) that is a sterile power for injection that I need to have ... View More
USA Product Safety Laboratory needed for ANSI Testing of Personal Protection Equipment to ANSI Z87.1 2010
need our goggles tested View More
United States FDA GMP bioanalytical laboratory needed for condom compatibility testing or water-based personal lubricant for condom compatibility. The... View More
Electrical Laboratory needed for IEC Testing: Audio, video and similar electronic apparatus - Safety requirements to IEC 60065 and IEC 60268-3:2013Sou... View More
USA Medical Device Laboratory needed for testing to EN388, Gloves Giving Protection from Mechanical Risks: Resistance to abrasion, Blade cut resistanc... View More
India pharmaceutical laboratory needed for complete sexual wellness product testing of personal lubricant gel View More
USA Pharmaceutical CLIA certified reference laboratory needed for contract testing for pharmacogenomics PGx testing (Personalized Medicine) with Compr... View More
USA Sports Laboratory needed for ASTM Testing of Outdoor fitness equipment to pass ASTM: F2276-10, ASTM F1749-09, and possibly parts in ASTM F887 incl... View More
USA Product Safety Laboratory needed for glove cut resistance testing to ANSI 105-2005 American National Standard for Hand Protection Selection Criter... View More
Canada FDA GMP medical device laboratory needed for personal lubricant testing in support of a FDA 510(k) for the intent to sell in the United State... View More
Food Laboratory needed for caffeine testing in several liquids. The number of liquids I test will be dependent on the cost of tests (especially as re... View More
Food Laboratory needed for food testing and of foods products for unnatural ingredients. We're a consumer-protection law firm interested in learning... View More
Medical Device Laboratory needed for physical, safety and biocompatiability testing of around 20 variations of Personal lubricants for FDA 510k submi... View More
Canada GMP Health Canada Pharmaceuticals Analytical Chemistry Laboratory needed for Propofol Testing: Globule Size by Coulter Counter determination
... View More
Canada or Eastern US Safety Laboratory needed for ANSTI Personal Protective Equipment Testing of Hard hat and Visor. We're looking for testing that wi... View More
Asia Laboratory needed for FDA testing of nanotechnology surgical gowns to test textiles for barrier protection against pathogen and blood. against E... View More
USA Cosmetics Analytical Chemistry Laboratory needed for Total Nitrosamine Content analysis for personal care product (70% surfactant, 30% water). The... View More
USA, Argentina, Germany, France biomedical labroatory needed for IEC Testing: Ultrasound for physiotherapy - samples - 01 und
Stimulator for physioth... View More
Preclinical Contract Research Organization needed for Neurology Toxicology Studies: Ototoxicity and protection against ototoxic insults such as antibi... View More
Europe or North America Electrical Certification Testing of Personal Protection Equipment PPE to IEC 60895 testing for cunductive garments up to 800 k... View More
University Researcher needs Ireland electronics laoratory for cell phone safety and toxcity testing is needed:x-ray fluorescence spectroscopy safety ... View More
Engineering firm needs Electrical and mechanical Laboratory for Life cycle testing of industrial cleaning equipment View More
FDA Laboratory needed for evaluation of organic oil marketed under FDA as "personal lubricant". Need oil analyzed as well as tube packaging materials.... View More
URGENT: Asia forensics laboratory needed for drilling project failure analysis. 3rd party lab which can analyze the reason of broken pipe and swivel. ... View More
FDA Medical Device Preclinical Laboratory needed for medical lubricant testing for FDA 510k: cytotocity., vaginal irritation and systematic toxicity,... View More
Asia or Europe Laboratory needed for PPE personal protective equipment testing of chemical protective garment according to EN standard EN 13034 and EN... View More
USA electrical laboratory needed for electrical Testing of components (transformers, protection equipment, etc) against power grid (15kV) and up volta... View More
Playground equipment manufacturer planning on entering USA market needs product safety laboratory for playground equipment testing: ASTM norms (ASTM ... View More
LONG TERM: China laboratories needed for regular chemical quality control testing. Regular NMR, GCMS testing of samples to provide independent purity ... View More
India materials laboratory needed for tire sealant testing as per:
(A) Ethylene Glycol base Aqueous solution,anti corrosive,non-inflammable,non-exp... View More
USA Biomedical Laboratory needed for medical device testing: Biocompatibility testing, preservative efficacy testing, condom compatibilty testing, Bi... View More
FDA cGMP Microbiology laboratory needed for Hand sanitizer efficacy testing against bacteria and virus protection and 99.99% kill against harmful bact... View More
Microbiology Laboratory needed for hand sanitzer efficacy testing against influenza A virus (human) 1. Objective ? demonstrate 8 hr protection and 99.... View More
Chemical/Microbiological/Toxicological/Claim Support & Efficacy Testing/Legal Services....for COSMETIC & Personal Care Products View More
California Materials Laboratory for comparison testing of product vs. competitor product: compression testing (on an Instron machine) to determine the... View More
Electrical equipment importer needs electrical certification lab for certification verification testing to verify the authenticity of a CB Test Certif... View More
Researching partner western Russia and Easternn China laboratories ASTM ad ISO testing of in-service lubricants and coolants for equipment condition a... View More
Medical Device Manufacturer needs Florida product safety, medical device laboratory for NFPA Testing and ASME Testing to ASME PVHO 1, Safety Standard... View More
Biophysical Research and Development Laboratory needed for sporting goods product design and development studies to prevent horse collar injuries in f... View More
US testing laboratories for OECD Biodegradation Testing - specifically Biodegradation of Plastics Testing and other ingredients used in personal care.... View More
Midwest FDA GMP Microbiology laboratory needed for microbiology testing of E. coli bacteria-based bioprocessing platform. This involves using agar-ge... View More
Consumer Products Microbiology Laboratory needed for antibacterial efficacy study for shower cream product to substantiate claim on "24 hrs 99.9% germ... View More
Medical Device laboratory needed for ASM Testing to support FDA 510(k) of feminine hygiene products and are targeting markets worldwide recently. As f... View More
South America TOxicology Laboratory needed for Toxicity testing: Acute Inhalation Toxicity:
equipment ad materials View More
ASIA Laboratory needed for ASTM Testing of Lubricating Jelly to ASTM D7661, Standard Test Method for Determining Compatibility of Personal Lubricants ... View More
Southern USA FDA Registered and cGMP compliant laboratory needed for to perform ASTM D7661 testing to ASTM D7661, Standard Test Method for Determining... View More
Genetics Laboratory needed for human genetics testing of Human sample for chromosomal aberrations by induction of DNA strand breaks by production of R... View More
Northeast USA engineering laboratory needed for SAE Testing to Marine SAE J1171, External Ignition Protection of Marine Electrical Devices. for brushl... View More
Pharmaceutical company needs FDA GMP California bioanalytical laboratory for FDA Testing: Residual protein testing in rinse water from equipment clean... View More
Middle East Microbiology Laboratory needed for microbiology testing: Limulus Amebocyte Lysate (LAL) Testing, Endotoxin Testing on sterilization equipm... View More
Genetics Laboratory needed for human genetics testing of Human sample for chromosomal aberrations by induction of DNA strand breaks by production of R... View More
Biomaterials Laboratory needed for ASTM Testing: compatibility of non lubricated latex , poliurethane and polyisoprene condoms with a lubricant to AST... View More
Microbiology Laboratory needed for microbiology testing: environmental conditions and test procedures for airbone equipment-section 13 : Fungus Resist... View More
Microbiology Laboratory needed for anti-microbial testing of cold sterilizing solution by Immersion of medical equipment, formulated with glutaraldehy... View More
safety gloves to International Safety Equipment Association Standards, ANSI / ISEA 105-2011, American National Standard for Hand Protection Selection... View More
Japan Snow Gear manufacturer needs safety laboratory for helmet testing: EN 1077 Testing and FIS Testing to FIS SPECIFICATIONS FOR COMPETITION EQUIPME... View More
Pharmaceutical Product Safety Laboratory needed for Microbiology testing and product safety testing of excipient to obtain GRAS status. Acne: propion... View More
Looking for supplier to conduct and certify USA Product Safety Laboratory needed for ANSI Testing of safety lenses for the ANSI Z87.1-2010 American Na... View More
Environmental Simulation Laboratory needed for marine environmental testing: IEC Testing to IEC 60945, Maritime navigation and radiocommunication
equ... View More
US agriculture and microbiology laboratory needed for crop study using sedimentary pea gravel to grow crops from seed to harvest without any fertilize... View More
Safety Laboratory needed for ANSI Testing of safety gloves to ANSI 105-2011 American National Standard for Hand Protection Selection Criteria View More
Food Laboratory needed for formulation of silicone base food release spray to be used in equipment like waffle bakers. View More
Texas physical laboratory to needed for ASTM Testing: Aerosol testing for flashpoint testing for personal care products and the Flammability of Aeroso... View More
Safety Materials Laboratory needed for ASTM Testing of PPE personal protective equipments testing as per European and ASTM standards. View More
United States biomedical laboratory needed for AAMI Testing of blood pressure transducers according to AAMI standard. The test will be performed to me... View More
Consumer Products analytical chemistry laboratory needed for tea light testing: 3-4 off tea lights that we require tested for VOC and PAH. Do you have... View More
Africa Materials Laboratory eeded for mechanical tribology testing on all the mining equipment machineries oil sampling at a progressive level. View More
Large electrical manufacturer needs environmental simulation laboratory for International Electrotechnical Commission IEC Testing of Ground Enhancemen... View More
Materials Laboratory needed for ANSI Testing to ANSI MT/75 metatarsal protection test, for Minings boots (Viking) View More
USA microbiology laboratory needed for Anti-mold products need to pass USA Environmental Protection Agency's EPA regulations of Federal Insecticide, ... View More
Asia Analytical Chemistry and Microbiology Laboratory needed for formulation and stability testing of industrial, household and personal care products... View More
Physical Laboratory needed for physical testing: ANSI Testing physical glove performance testing for cut, puncture, abrasion according to ANSI 105 - 2... View More
Toxicology, Bioanalytical and Environmental Laboratory needed for materials testing of face mask material for respirator with the characteristics of d... View More
Bioanalytical laboratory needed develop/improve and perform routing release testing using an existing diagnostic kit that would be provided to the se... View More
Southeast USA Microbiology Laboratory needed for USP Testing to USP 61, Microbial Examination of Nonsterile Products: Microbial Enumeration Tests, on... View More
FLORIDA PHYSICAL LABORATORY NEEDED FOR ANSI TESTING FOR ANSI CERTIFICATION OF FALL ARREST PERSONAL SLINGS AND CARGO SLINGS FOR:
ANSI Z359.1
ANSI A10... View More
UK Medical device laboratory needed for Biocompatibility testing for Class-III (EU Classification) personal lubricants. View More
Europe Mechanical Laboratory needed for Mechanical Testing to ISO 16750, oad vehicles - environmental conditions and testing for electrical and electr... View More
Asia lightning certification laboratory needed for certification testing for early streamer emission(lightning protection system) View More
Canadian Contract Research Organization CRO needed for preservative testing of personal care products View More
South Sudan geotechnical laboratory needed to Conduct geotechnical investigation at Kidepo bridge site to deternmine the nature and characteristics of... View More
Canada or USA materials laboratory needed for lubricating grease testing. This is not a standard test, but it is easily run. It can be run by any la... View More
Asia Physical lightning certification laboratory needed for certification testing for early streamer emission(lightning protection system) View More
Asia Physical lightning certification laboratory needed for certification testing for early streamer emission(lightning protection system) View More
Physical lightning certification laboratory needed for certification testing for early streamer emission(lightning protection system)
View More
California Consumer Products Safety Laboratory needed for consumerproduct safety testing. Tested Required for 18" Oscillating Fan
1. Polarized Plug
... View More
FDA GMP Physical laboratory needed for dimensional verification, force to fire testing, material hardness, etc.
The equipment required would be the ... View More
Looking for supplier to conduct and certify lenses for the ANSI Z87.1-2010 American National Standard for Occupational and Educational Eye and Face Pr... View More
USA food laboratory needed for nutritional testing for nutritional value in the chickens I raise on pasture and compare it to caged birds. This if fo... View More
Ireland and UK medical device laboratory needed for ISO Testing: Analysis of medical device materials. Compliance to ISO 8536-4 Infusion equipment for... View More
USA Consumer Products Laboratory ANSI B175.3 Section 7, Outdoor Power Equipment - Grass Trimmers and. Brushcutters - Safety Requirements View More
Western Europe agricultural laboratory needed for Soil,water and seed equipments testing for hub Center View More
USA Electrical Certification Laboratory needed for IEC Testing: X-Ray Film Digitizer Equipment IEC 60601-1 3rd Edition and a test report and CB certi... View More
Materials Laboratory needed for Lubricants Testing: Special tests to be run in typical lubricants lab. Method description will be supplied, along wit... View More
India Electrical Laboratory needed for RFI and EMI LED Tube Light testing and certification of Led Tube light I.e.T8 led tube light. 2 numbers. 1) Min... View More
India Physical Laboratory needed for FIRE RESISTANCE TESTING as per IMO FTP Code Part 3 Resolution A.754 (18)A.III & A.IV, International Structural Fi... View More
USA materials laboratory needed for ANSI Testing to gain an ANSI Z359 fall protection certification for a single product that is a combination of exis... View More
Large Automotive Company needs India Physical laboratory for Environmental Conditions and Test Procedures for Airborne Equipment Testing, Icing testin... View More
USA Mechanical Laboratory needed for ANSI Testing Full testing to ANSI B71.4, Commercial Turf Care Equipment - Safety Specifications
4 machines
Ful... View More
Canada Cosmetics Laboratory needed for cosmetic testing: Stability Testing, Viscosity Testing & Rheology testing on Personal Care Ointments and Creams View More
Safety Laboratory needed for BS EN Testing to BS EN388 Protection against Mechanical Hazards and BS EN422, Rubber and plastics. Machines. Safety
View More
FDA Toxicology Laboratory needed for cytotoxicity testing, FDA testing for condom compatibility with personal lubricants. Cytotoxicity " View More
International mining company producing aggregates for the construction needs oil laboratory for scheduled oil sampling (SOS)of our crushing and screen... View More
USA Laboratory needed for GPA Testing to GPA 2130 and GPA2106, extended analyisis of oil and gas samples collected from produciton equipment View More
Industrial Hygiene Laboratory needed for hearing testing. hearing tests in my workshop area to find out what type of hearing protection is needed" View More
FDA GMP Compliant pharmaceutical laboratory needed for USP Dissolution Testing. Laboratory must have equipment to run USP Apparatus 7 View More
Testing of personal lubricant to determine condom compatibility View More
Physical Laboratory needed for BS Safety hazard testing to BS EN 168:2002, Personal eye-protection. Non-optical test methods. Clause 16 and ISO 4855-1... View More
USA Food Laboratory needed for ANSI 51 Testing. NSF/ANSF 51 (National Sanitation Foundation - Food Equipment Materials View More
USA FDA GMP Laboratory needed for Condom compatibility testing of personal lubricant to submit with 510K class I Med Device application. View More
Life Science Company needs Canada Medical Electrical Laboratory for International Electrotechnical Commission IEC Testing to IEC60601-1:2005,Medical E... View More
Physical Laboratory needed for Underwriter's Lab UL fire testing to UL1709 Rapid Rise Fire Tests of Protection Materials for Structural Steel: test de... View More
India Geology Laboratory needed for rock testing Limestone, Dolomite , Iron & Manganese (20 - 30 Samples) has been collected from my field work. And r... View More
West Coast UL Electronic Certification Laboratory needed for UL Certificaiton testing to Certify an inverter to U.L. 1741,Inverters, Converters, Contr... View More
Europe Electronic Consumer Products physical laboratory needed for crash testing on our equipment that is after the test made no cracks... View More
Electrical Laboratory needed for IEC Testing: IEC 61230, Portable equipment for earthing or earthing and short-circuiting View More
California Electrical Laboratory needed for IP Testing: Water Proof testing (IPX standard, Ingress Protection Rating) is needed to be done on a fully... View More
Mexico certification laboratory needed for electrical reliability Testing for equipment:
Brand: Monster Power
Model: HDP 1800
Description: High d... View More
India Materials Laboratory needed for ISO testing or ASTM Testing: UV-B exposure (Atlas equipment)on Tape(Belt) nylon 26mm wide, 3mm thick View More
USA Analytical Chemistry Laboratory needed for elasticitiy Testing of the surface tension (elasticity) of the pharmaceutical surfactant Pulsating bubb... View More
ELECTRONICS CERTIFICATION LABORATORY NEEDED: CE LABORATORY FOR ELECTRICAL CERTIFICATION OF OUR POWER SUPPLY(SAFETY & EMI/EMC) WE ARE MANUFACTURER OF E... View More
West Coast USA Virology/ bioanalytical laboratory needed for virology cell line testing. baseline and follow-up testing of control versus treated hum... View More
Electrical Laboratory needed for electrical resistivitytesting of pure Copper (20 °C) 16.78 nΩ·m. The Copper pen-size bar was already treated th... View More
Eastern USA physical laboratory needed for impact testing, ball and Joint Outdoor power equipment, Mowing Deck on a lawn and garden type tractor. View More
Mechanical laboratory needed for abrasion testing by using ABREX equipment. Test item : IEC60068-2-70 Test component : Knob of Automotive interior pa... View More
Product Safety Laboratory needed for materials compliance testing to ANSI/ISEA 107-2010 International Safety Equipment Association,American National S... View More
Consumer Products Laboratory needed for mosquito repellent study for repellency testing (arm in cage) complete protection time of our mosquito repelle... View More
Europe mechanical and electrical laboratory neede for EN-50483 (complete) mechanical testing and electrical testing of cable equipment for isolated LW... View More
Southwest Europe analytical chemistry laboratory needed for product analysis, problem investigation/ trouble shooting and failure analysis areas for ... View More
ISO, FDA GMP Analytical Chemistry Laboratory needed for formulation testing to develop a formula for personal lubricant. Water based and silicone base... View More
Pharmaceutical Microbiology Laboratory needed for bacterial endotoxin testing of distilled water for use as injectibles. Water Purification Project fo... View More
United Arab Emirates Physical Laboratory needed for waste wood testing to analyze the "Lower Heating Value" (lower colorific value) of waste wood and ... View More
Manufacturers of safety equipment and clothing needs electrical laboratory for electrical arc testing. What is the time required for testing? The ma... View More
New Jersey Contract Preclinical Laboratory needed with equipment and experience performing rat pulmonary arterial hypertension model(s)." View More
Microbiology Laboratory needed for ASTM antibacterial testing perfomance evaluation of antibacterial bath soap in accordance to ASTM E2752-10 method o... View More
OSHA compliant ANSI Manufacturer manufacturing a new hearing protection device needs sound testing and also OSHA compliant certs and NRR rating. View More
Medical Device Preclinical, Clinical Laboratory needed for Condom-Compatibility Testing of Personal Lubricant 1) Condom Test: Compatibility Study (Lub... View More
California EPA Analytical Chemistry Laboratory needed for VOC and EPA particulate matter testing: 2.5 Particulate Matter
the annual requirement outl... View More
East Europe Telecommunications Laboratory needed for R&TTE Testing Intruder alarm system control panel R&TTE Radio & Telecom Terminal Equipment Direct... View More
Texas Electrical Laboratory needed for UL Testing: ul61010-1 Standard: Safety Requirements for Electrical Equipment for Measurement, Control, and Labo... View More
USA medicinal chemistry laboratory needed for conducing nutrient heat stability testing on botanically based dietary ingredients with a lab that utili... View More
Australia Toxicology Laboratory needed for Toxicology testing on personal care raw materials such as SLES, CDE 80, Cocamido propyl Betaine, Glyceryl S... View More
Middle East Industrial Hygiene Laboratory needed for occupational health, personal hygiene testing of factory workers. View More
India Materials Laboratory needed for ASTM Testing: Melting Temperature, degradation mechanism, calculating molecular Weight by gel permeation chromat... View More
USA preclinical laboratory needed for preclinical contract influenza vaccine protection studies. N eed a poultry vivarium View More
US medical device bioanalytical laboratory needed for ASTM Condom biocompatibility testing to ASTM D7661-10 Standard Test method for determining compa... View More
Electrical laboratory needed for Outdoor single pole hook operated Disconnect Switch testing: Rating: 11 KV/ 15 KV, BIL : 110 KV, Continuous Current R... View More
Food Nutritional Laboratory needed for Lactic acid testing to IFU methods using ONLY KONELAB equipment View More
Medical Device Consumer Safety laboratory needed for USP Testing d7661-10 for personal lubricant tested for condom safety. View More
India, Asia FDA GMP Analytical Chemistry Laboratory needed for Sunscreen Testing: Sun Protection Factor, UVA Protection Factor, Boot star rating, Crit... View More
Acoustics Laboratory needed for safety rating testing of earplugs (silicone) rated for hearing protection. Do you do this type of testing. If so, wha... View More
ISO 17025/ILAC certifed laboratory needed for wild freshwater Asian carp testing.
1. Laboratory issued detailed and full test report according to... View More
Air treatment Equipment Manufacturer needs Microbiology laboratory for viral efficiency testing of air sterilizers efficiency of our air sterilizer fo... View More
FDA Consumer Products Laboratory needed for clinical consumer Products study Personal Lubricant compatible with condoms
Certain number of women sho... View More
Bioanalytical Laboratory needed for Large scale analysis of soluble sugars. Enough capacity to analyze 1000+ samples in 2 weeks with an average run ti... View More
Medical Device Laboratory needed for ASTM compatibility testing of personal lubricant products to ASTM D7661 for compatibility with natural rubber lat... View More
Middle East industrial hygiene laboratory needed for acrolein testing. 25 personal samples for acrolein by passive monitor View More
California Microbiology Laboratory needed for Medical equipment sterility testing. Roughly 4/mo. View More
Contract Research Organization (CRO) needed that has large scale production capacity for the analysis of soluble sugars.
The CRO must have:
1... View More
US FOOD CERTIFICATION LABORATORY needed for third party certification testing of food equipment used as part of a seasonal or annually-renewing health... View More
Vermont Microbiology Laboratory needed for microbial contamination testing (yeast, mold, bacteria) in environment, kettles and production equipment. View More
Large office equipment manufacturer needs electronics laboratory for Conductivity measurements of powders measure the conductivity of 3 laser beam pri... View More
Saudi Arabia construction and building, engineering laboratory needed for vibration test of a building in which Air Conditioning Equipments are operat... View More
Asia Mechanical Laboratory needed for NF C 33-040 Mechanical Load Test. Insulated cables and their accessories for power system;
Suspension equipment... View More
Mechanical Product Safety labroatory needed for ANSI fall protection testing of fall protection device to OSHA standard 1926.502 and possibly ANSI sta... View More
Sports equipment Mfg needs textiles laboratory needed for textile testing for pressure. I need to test graduated compression apparel in mmHg. If so, w... View More
Canada or USA Certification Laboratory needed for ASTM safety certification of Fall Protection, Personal Protective Equipment to ASTM Z359.1 View More
Canada, UK or USA physical laboratory needed for 16 CFR 1610 (flammability) and Compliance with EN 13795 for Surgical Equipment Drapes View More
USA Physical Laboratory needed for Called protection test IP69K this uses high pressure heated water aimed at the test item at 4-5 different angles. W... View More
Medical Device Electrical laboratory needed for IEC testing to:
IEC 60601-1:1988 + A1: 1991+ A2:1995 - Medical electrical equipment: General
r... View More
USA Consumer Safety Certification Laboratory needed to Test and certify New Eyewear Protection product to allow sale and distribution in the USA View More
USA, Canada, Europe Product Safety Laboratory needed for UVA / UVB protection factors testing, waterproof effect testing, photostability testing View More
USA GLP Medical Devices Laboratory needed for testing coefficient of friction with and without a medical device (personal lubricant) View More
USA Analytical Chemistry Laboratory needed for a dust measurement testing on a powdered product in ppm using a Heubach machine or similar testing equi... View More
China or Taiwan ANSI Consumer Products Safety Laboratory needed to test for fall arrester of Personal Protective Equipment as per ANSI/ASSE Z359.1-200... View More
Canada Environmental Laboratory needed to test various environmental elements (soil, water) and household and personal care products for toxic chemica... View More
India NABL DIN ISO Electrical/Mechanical Laboratory needed for product safety testing as follows:
1) Low Voltage Directive 2006/95/EC amended ... View More
India/USA Environmental Laboratory needed for testing as per DO-160F: Environmental Test Procedures for Airborne Equipments View More
AAALAC, FDA Preclinical Contract Research Organization needed for neuroprotection study involving radiation-induced brain damage in rodents.
Basic be... View More
Northwest USA Electrical Laboratory needed for DO-0160F Electrical/EMI/EMC Testing for Cockpit control Boxes. Rotorcraft Mission Equipment. View More
Eastern USA metallurgical labroatory needed for trace metals analysis 10 samples of carbon inks that were made on a piece of equipment where the suppo... View More
Large electrical mfg needs Brazil Electrical Laboratory for IEC Lightning protection system testing for wind blades. Test to include high voltage atta... View More
USA Consumer Products Safety Laboratory needed for ASTM testing of home playground equipment as per astm f963-08 astm f1148 and 16cfr. View More
USA, Asia, Europe Consumer Products Safety Laboratory needed for performance tests to residential A/V furniture Stability, Strength, Tip Over, Mechan... View More
Analytical Chemistry Laboratory needed to set up temporary mobile lab at Palouge Site Feed Processing Facilities and provide Laboratory Testing appara... View More
US electrical laboratory needed for electrical arch flash protection testing of gloves View More
FDA GLP AND Non FDA Product Safety Laboratories needed for Latex rubber male condom compatibility testing with water-based personal lubricant, per Spe... View More
USA ASTM/ISO/DIN Metallurgical Laboratory needed for thickness calibration standards for carbon steel. Required standards for use in generating second... View More
Materials Laboratory needed for fabrics protective testing to NFPA2112 standards. Our fabrics our used in Europe for heat & flame protection and metal... View More
Saudi Arabia FDA Medical Devices Laboratory needed to test for Samples which are collected normally during inspection at the port of entry or at in... View More
ISO ANSI Laboratory needed for safety temperature vibration test for hand protection. View More
Large Automotive Safety Equipment Manufacturer needs Southwest USA Materials Laboratory for testing in accordance to ANSI Z359.1 CSA Z259.2.2 CE 360 a... View More
North America ANSI Mechanical Laboratory needed to test the integrity of turbine flow meter diaphragms between fluid pressure and electrical equipment... View More
Analytical Chemistry Laboratory needed to test 10 organic fertilizers for antibiotics and personal care products. Analyze for the following antibiotic... View More
China ASTM Materials Laboratory needed for High Temp Nylon and HDT test as per ASTM D 648 - Equipment must be capable to heated up to 320 deg c+ View More
CSA/ASNI Laboratory needed for testing Safety Equipment/Fall Protection/Harness and Lanyards -Looking for 50 plus items for approval View More
Metro NYC, Lower CT IEC Electrical Laboratory needed for solar radiation test RTCM 11010.2 as per IEC60945 - Personal locator beascon 4"LX 2.5"WX1.5"T... View More
Dallas ISO, US EPA Materials Laboratory needed for ASTM Testing reactor, waste and other related parameters. Our company designs, manufactures and sup... View More
Calgary, Alberta EPA Environmental Laboratory needed for supplying equipment (desorption tubes) and then testing them for 4-Phenylcyclohexene using a ... View More
Thailand Manufacturer for air dryers and filters needs ISO Medical Equipment Materials Laboratory to test medical vacuum filters as per HTM 2022. View More
Europe Materials Laboratory needed for testing polymer samples for antioxidant measurement. Unfortunately we don't not know which antioxidant were use... View More
India ASTM Microbiology Laboratory needed for Deodorant Efficacy - In vitro time kill test as per ASTM E2315 to generate data for claim substantiation... View More
FDA GLP Clinical Toxicology Laboratory needed for Human sperm motility/survival testing under the presence of personal lubricant product View More
Electrical Laboratory needed for IP-41 eletronics testing electronic console for IP - 41 Protection class View More
ASTM Packaging/Mechanical Laboratory needed for the following testing:
SEQUENCE: 1 ELEMENT: A Manual Handling Distribution Simulation Hazards incurre... View More
Large Pharma needs Bioanalytical Laboratory for a rapid method test for the quantization of a 7-carbon monosaccharide in a raw material matrix (fruit)... View More
USA ANSI Laboratory needed for testing of finished products for compliance with ANSI/ASSE A10.32-2004:
Fall Protection Systems View More
Mechanical Laboratory needed for testing a bottle design project for 250 ml soap soln. bottle. As a part of the project we want to do a design optimiz... View More
USA Mechanical Laboratory needed for biomechanical testing of undergarments containing padded foam for hip protection View More
Large Company in Africa needs PPE Testing Laboratory in Doula, Cameroon to test and certify PPE equipment every 3 months. Equipment includes overalls,... View More
India IEC Laboratory needed for testing as per IEC 61373,wt of equipments with fixture is 3,500 kg View More
USA Physical Laboratory needed for testing Polish Stone Value of coarse aggregate in accordance to ASTM, recommend the use of BS Series/doc. No
BS BS... View More
Philippines, Asia, India Preclinical Contract Research Organization needed for In Vitro Sun Protection Factor (SPF) testing of at least 6 samples. View More
AIHA Laboratory needed for testing as per NIOSH / OSHA, Analytical samples as well as asbestos bulk and personal air sample testing View More
Mumbai Metallurgical Laboratory required for Ferroxyl test on a stainless steel equipment to find out iron contamination View More
USA Product Safety Laboratory required for Testing for ANSI Z-89.1-2009 - Industrial Head Protection View More
Product Safety Laboratory required for testing industrial head protection according to ANSI Z89.1-2009 View More
Midwest USA Mechanical Laboratory required for 220 lbs. drop test per ANSI/ASSE A10. 32-2004 on personal protective equipment View More
Mumbai electrical laboratory needed for IEC Testing of electronic equipment as per IEC
View More
West Coast Bioanalytical Laboratory needed for Inulin and oligo-Saccharides testing:
Laboratory needs HPAE chromatographic equipment coupled with a ... View More
California food analytical chemistry Laboratory needed for drug testing of liquid odorless in my fried rice. i became ill. i will personally pay for ... View More
Montreal NETA laboratory needed for AIS Acceptance Testing: resistance test, relay synchronization and protection (including calibration and configura... View More
US laboratory for certification of lifting appliances for lifting beams. Typical of CDE equipment pull test and NDE test View More
Large Medical Device Manufacturer needs Arizona Medical Device Laboratory needed for Equipment sterilization Testing View More
Canada Textiles Laboratory needed for testing fabrics for the UV protection index View More
USA Preclinical Contract Research Organization needed for intravenous immunoglobulin (IVIG) In vivo and in vitro efficacy studies by mouse protection... View More
India Physical Product Safety Laboratory needed for Mechanical Shock & Vibration Test with dummy load, Ingress Protection (IP-55),& Pressure test at 5... View More
Optical laboratory needed for optical testing aspherical optical lens with Taylor Hobson TalySurf equipment View More
Exploration Company needs California Geology Laboratory for Geochemical Accelerator Mass Spectrometry and Pyrolysis GC/MS Testing.We have a number of ... View More
Europe FDA GLP CRO needed for Clinical Study, in-vivo Challenge Protection Study (efficacy or potency or immunogenicity testing ) in poultry chicks f... View More
Mechanical Laboratory needed for thermal, combustion testing, glycerol combustion experiments and would like to measure the acrolein emission in the e... View More
Physical Laboratory needed for NFPA Testing and ASTM Testing of electronic equipment under NFPA 130, ASTM E 162 and 662. View More
Popular Industries
