Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
MULTIPLE SAMPLES
Need testing for CARC (Chemical Agent Resistant Coating) as per AEP-65 under STANAG 4360 for military vehicles. System
- 1 (RAL 1019 Gray Beig...
LONG TERM
We need an AMECA-approved lab to test Nylon tube used in the automotive industry per SAEJ844 and DIN74324 standards. Can you please confirm the followi...
MULTIPLE TESTING
We're looking for fire blanket testing with up to 9000 lithium batteries per DIN 91489 (Requirements for fire limitation blankets for use with electr...
We are looking for an independent lab to analyze lube oil and gear oil brought to our facility. We need to make sure they meet the specifications since we have been having iss...
We're looking for a general quote on flammability testing per FMVSS 302, DBL 5307, GB 8410, TL1010. Would like to see the cost broken down by bundles, isotropic parts, anisotr...
We need a SAE J350 spark arrestor test done on a muffler. Test to be done by a US automotive testing lab/facility.
SAE J350: Spark Arrester Test Procedure for Medium-...
Need Individual testing of a Japanese imported vehicle to meet California registration requirements. Vehicle: 1992/1993 Mazda RX7 FD3S
BUDGET APPROVED ($2,000-$5,000)
USA / WASHINGTON We need to match two paint samples to prove two vehicles collided. We need the turnround to be two weeks.
Contract Laboratory needed for DOT certification testing in accordance with FMVSS 500(Low Speed Vehicle Requirement) for electric golf cart that use DOT certified parts ...
URGENT
Large corporation needs Contract Laboratory for alternate coolant additives testing in water radiators - DI Water + coolant additive.
The main setup of t...
Automotive and vehicles testing lab needed to share a quote for ASTM D6107 (Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service) testi...
Contract automotive testing laboratory needed for testing to assess an All-Terrain Vehicle.
Contract Laboratory needed for ISO compliance testing for a product with ISO 11154 (Road vehicles — Roof load carriers).
Could you please share the test protocol, testing cos...
URGENT
Contract laboratory (Canada preferred) needed to provide a quote for Test 18 - Abrasion resistance of glass samples per ANSI Z26 (American National Standard for Safety...
URGENT TESTING
ISO 17025-certified laboratory is needed for testing of car starter motors. We would like to receive the test report that Amazon requested from us. Do you have...
URGENT
USA Independent vehicle testing vehicle laboratory needed for testing an electric off-road or all-terrain vehicle (ATV) to comply with the American National Standard f...
MULTIPLE TESTING
Third-party testing needed for competitive analysis of carwash products. Suggested tests are:
- Coefficient of friction
- Contact angle and
- Cleaning on...
URGENT - MULTIPLE TESTING
Material testing laboratory needed for the following military standard testing procedures:
- A MIL-STD-810H Method 505.7 Procedure II (solar radiat...
MULTIPLE TESTING
Aftermarket Auto Spareparts importer-distributor requires ISO 17025 automotive laboratory for testing brake master cylinders and brake wheel cylinders to b...
MULTIPLE TESTING
Accredited automotive testing Lab needed to perform ISO 9237 Air Permeability test on laminate and artificial leather samples for Tesla TM-6001 - 1B2 require...
Contract Laboratory needed for VOC & formaldehyde testing as per Mahindra G001730 (acceptable limit for formaldehyde and other carbonyl compound emissions in vehicle interiors...
Turkey-based Automotive Laboratory needed for Chrysler Emission testing as per CS-13398 (Chrysler Standards Testing)
Third-party Automotive Laboratory needed for testing three samples of car seats.
URGENT
An electric low-speed vehicles (LSV) manufacturer requests a quote for LSV Testing per the Federal Motor Vehicle Safety Standard 500 (FMVSS 500).
How many vehicles do...
Contract Laboratory needed for SAE testing of fluorocarbon (FKM) seals for Fuel tank caps in motorcycles to SAE J2659 Test Method to Measure Fluid Permeation of Polymeric Mate...
Contract Laboratory needed for SAE Lighting Testing to SAE J575 Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width
Automotive Laboratory needed for testing to Volvo STD 423-0036 TEST METHOD Impact strength, falling-weight method Organic materials Orientation
MULTIPLE PRODUCTS
California Contract Laboratory needed for AES-100 reliability testing of electric vehicles EV and batteries
MULTIPLE TESTING
Automotive Laboratory needed for UNECER testing of 12meter coach bus accordance to UNECER 51.03 Uniform Provisions Concerning the Approval of Motor Vehicles ...
Specialty Vehicles Company needs USA Laboratory for identification of a chemical composition analysis on an unknown substance that was found alternators which failed inside ...
MULTIPLE TESTING
USA LABORATORY (Pennsylvania/Virginia Lab Preferred)
Accredited Automotive Laboratory needed for ASTM Testing of an elastomeric bearing pad, with and with...
MULTIPLE TESTING
MULTIPLE PRODUCTS
USA Contract Laboratory needed for FMVSS testing of Low Speed Vehicle as per Federal Motor Vehicle Safety Standards FMVSS 500 (Low-speed...
MULTIPLE TESTING
MULTIPLE PRODUCTS
Large Manufacturer needs Qualified USA Laboratory for various performance testing for actuators and sensors to validate quality for import...
Environmental Simulation Laboratory needed for heat cycle testing on a large UPS size walk-in vehicle
MULTIPLE PRODUCTS
Contract Analytical Laboratory needed for Persistent Organic Pollutants (POP) testing in automotive rubber parts.
Please share quotation
FCC-Recognized Laboratory needed for FCC (federal Communications Commission) connectivity certification testing of an automotive aftermarket device for connectivity.
MULTIPLE TESTING
Electrical Laboratory needed for EU and USA voltage compliance testing of Automotive Cable
USA LABORATORY (California Lab Preferred)
MULTIPLE TESTING
USA Third-Party Independent Laboratory needed for competitor's analysis comparison study and certification of auto...
URGENT
LONG TERM TESTING
Contract Laboratory needed for testing used marine engine fluids, such as used motor oil, coolant, freon, etc. for contaminants
Materials Laboratory needed Creep Testing as per Renault Test Method.
USA Contract Laboratory needed for ASTM oil residue testing per ASTM D 7066-04 on electric vehicle EV battery components
LEGAL
Canada Laboratory needed for unknown substance identification testing of a blue gel unknown substance that is suspected of being used to sabotage equipment and vehicl...
USA LABORATORY
MULTIPLE TESTING
USA Materials Laboratory needed for DOT glass properties verification testing for DOT rated glass from supplier. Is there a way to be able t...
MULTIPLE TESTING
Large Company needs Automotive Laboratory for ASTM, SAE, FLTM and FORD RA testing following FORD specification WSS-M2P177-C1/C2/C3 PAINT PERFORMANCE, META...
Automotive Laboratory needed for testing as per Ford specification ESBC3P-7W092-BA TDE Contamination Specification.
During process and monitoring
MULTIPLE TESTING
Contract Laboratory needed for tyre polish formulation testing.
SWEDEN LABORATORY
PRODUCT DEVELOPMENT
MULTIPLE TESTING
Third-Party Electrical Laboratory needed for SWEDAC for EMC and Environmental testing on new Breath Alcohol Interlock...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests