Laboratory Outsourcing and Scientific Sourcing Center

We need a SAE J350 spark arrestor test done on a muffler. Test to be done by a US automotive testing lab/facility.

SAE J350: Spark Arrester Test Procedure for Medium-...

Contract Laboratory needed for SAE testing of fluorocarbon (FKM) seals for Fuel tank caps in motorcycles to SAE J2659 Test Method to Measure Fluid Permeation of Polymeric Mate...

MULTIPLE TESTING
Automotive Laboratory needed for UNECER testing of 12meter coach bus accordance to UNECER 51.03 Uniform Provisions Concerning the Approval of Motor Vehicles ...

MULTIPLE TESTING
USA LABORATORY (Pennsylvania/Virginia Lab Preferred)
Accredited Automotive Laboratory needed for ASTM Testing of an elastomeric bearing pad, with and with...

FCC-Recognized Laboratory needed for FCC (federal Communications Commission) connectivity certification testing of an automotive aftermarket device for connectivity.

USA Contract Laboratory needed for ASTM oil residue testing per ASTM D 7066-04 on electric vehicle EV battery components

MULTIPLE TESTING
Contract Laboratory needed for testing components of a new lawn mower being manufactured for a large company. We manufacture Lawn Mower Transmissions in Mexi...

Accredited and Recognized Laboratory needed for ISO testing for e-bike with motor capacity less than 250w. export to USA and EU market. looking for lab that is recognized and ...

LONG-TERM TESTING
Transportation Company needs Contract Laboratory for material certification testing of solvent o-rings on a regular basis and have testing performed to se...

MULTIPLE TESTS
MULTIPLE PRODUCTS
Automotive aftermarket parts brand needsTHird-Party Independent Automotive Laboratory for testing of imported filters, brake pads/shoe, su...

Automotive Laboratory neee for DIN Testing of air brake tube to Din 73378 standard Polyamide tubing for motor vehicles. . Please provide cost.

MULTIPLE PRODUCTS
Automotive Laboratory needed for General Motors Specification Testing to GM15787 specification Vehicle Exterior and Add-On Parts Paint Appearance Requiremen...

Automotive Laboratory needed for beach buggy compliance testing to GSO 15997 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS

Please help to advi...

MULTIPLE PRODUCTS
Automotive Laboratory needed for testing new waterproof electrical product used on automotive equipment such as snowmobiles and jetskis. Please answer the f...

Automotive Laboratory needed for ANSI Testing to ANSI Z26.1,Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety...

Tire Manufacturer needs Analytical Laboratory needed for XRD analysis. Please send quotation.

Materials Laboratory needed for internal quality control testing of webbing used for seatbelts according ASTM D6770 Standard Test Method for Abrasion Resistance of Textile We...

Mechanical Laboratory need for ASTM engine testing following the ASTM D5500 to study the intake valve deposits in an indirect injection gasoline engine.

Polymer Laboratory needed for ASTM Testing to 3 ASTM Standards: ASTM D5526
ASTM D5988
ASTM D6691

Materials Laboratory needed for ASTM testing of EPDM rubber waterproofing membrane based on ASTM D4637(Type I) requirements

LONG-TERM TESTING Disposable plastics company needs microbiology laboratory for ASTM biodegradability testing of a wide range of plastic disposable products to ASTM D5511-11 S...

Polymer Laboratory needed for conducting study on how moisture can affect the 3D printing process and/or mechanical process of photo-active resins. Moisture/water can have a n...

LONG-TERM TESTING Materials Laboratory needed for acoustics properties and sound absorption evaluation of polymer composite sheets of size (250 mm X 380 mm) approximately of ...

Materials Laboratory needed for critical micelle concentration(CMC) curve using Dynamic Tensiometer (DCAT) for STD polyurethane resin versus surfactants

LONG-TERM TESTING R&D Polymer Laboratory needed for determining the index of refraction of polymeric system (a flat solid sheet) on 10-20 samples.

ISO 17025 Accredited Toxicology Laboratory needed for biodegradability and toxicity testing of biodegradable plastic to validate biodegradability and non-toxic claims to plant...

Polymer Laboratory needed for ASTM testing of polypropylene fibers to meet ASTM standards C1116/C116M, C1609, D638, and any others that may need to be done on this product.

Materials Laboratory needed for chemical analysis of polypropylene fabric to the below specifications:

1. UV content analysis. we wish to know the exact active UV stabiliz...

LONG-TERM TESTING US Company needs Polymer Laboratory with Erichsen 430P tester to test the scratch resistance of automotive molded plaques per the Volkswagen method of PV3952...

Polymer Laboratory needed for gathering kinetic or concentration data on a polymerization reaction that occurs in our formulation. Similar to the data gathered by the Mettler ...

Pharmaceutical company needs laboratory for USP compendial testing of HDPE Bottle as per Current USP 661.1 & 661.2 compliance methods.,

Polymer Laboratory needed for ASTM thermal conductivity testing of epoxy polymer matrix composites

PRODUCT DEVELOPMENT Laboratory needed for pilot plant scale polymerization trials to develop new products of a reactor system of 50-100 gallons size capacity. Since the pentan...

Plastics Laboratory needed for urethane testing to HKMC spec MS300-55 (release of volatile organic compounds) testing on a UVA-cured acrylated urethane.

Polymers Laboratory needed for conducting an environmental simulation study on polycarbonate headlight lens of an led headlight for freezing rain and snow. to see if the snow ...

Automotive Laboratory needed for first edition of vehicle performance test methods including:
test of vehicle centroid height
test of vehicle static rolling ability
coastin...

Materials Laboratory needed for the determination of total mass loss and collected volatile condensable material from outgassing in vacuum environment of polymer material

Polymer Laboratory needed for polythene film testing for the presence of Tris Nonylphenyl Phosphate ) & 4-np free (P-nitrophenol) in the polythene film.

Polymer laboratory needed for rheology testing to determine the viscosity on Polyamide 06. Is this possible at your end ?

Plastics laboratory needed for gamma ray irradiation and measurement of light transmittance in PET bottles used in food and beverages. For measurement of light transmittance, ...

Polymer laboratory needed for laser transparency testing on plastic nylon parts.The values of laser transparency apply on every 12 points located on the diameter Ø36 with the...

Materials laboratory needed for ISO polypropylene testing: charpy impact strength analysis according to ISO 179-2/1eU for Notched and unnotched Polypropylene specimen at 23C

LONG-TERM TESTING Materials laboratory need for optical testing of polycarbonate resin lenses for transmittance, visible light wavelength blocking, and various other measureme...

PRODUCT DEVELOPMENT Polymer laboratory needed for product development of hot glue product from photopolymer waste material

Polymer laboratory needed for Forensic and Root Cause analysis of the manufacturing of RF welding of vinyl PVDF AND PVC materials

Large Pharma needs polymer laboratory to study and develop new blends of polymers including the characterization (mechanical, physical) of the produced blends and supply of sa...

Materials laboratory needed for preparation and evaluation of the resulting properties of an elastomer (styrene + isoprene) when mixed with some ceramic fillers (BaTiO3 and ot...

Research group needs polymer laboratory for fatigue crack growth rate measurements on transparent composite polymer specimens at low and high temperatures.