Laboratory Outsourcing and Scientific Sourcing Center

Need an Australian laboratory for compliant testing for disposable ECG electrodes in a class IIb wearable medical device to AAMI EC12 (Disposable ECG electrodes)

MULTIPLE TESTING

Need a CHINA / HONG KONG facility that provides testing for any of the following standards:

• 
  IEC 60601-1:2005+A1:2012
• 
  IEC 60601...
  Accepting Quotes

Medical Device Laboratory needed for testing cut out performance for a Nailing system product. Product is intended for use with trauma titanium screws.

MULTIPLE SAMPLES

BUDGET APPROVED ($1,000-$2,000)

Request a quote for RNase testing in an empty syringe for about 20 samples, including negative and positive con...

We need biocompatibility testing of a dental medical device per ISO 7405 standard.

LONG TERM

Looking for laboratory testing medical device for Hydrogen Peroxide sterilant (solution) per ISO 22441:2022 / PREN 17180(MAIN).

Vaporized Hydrogen Perox...

SOUTH KOREA Medical devices laboratory needed for thermal effect testing of disc decompression presurgical products per the FDA 510(k) guidance (Premarket Notification (510(k)...

We are a Singapore-based medical device company developing an endoscope product. We are looking for a lab to assist us in performing H₂O₂ residuals te...

Medical Device Laboratory for ISO pharmaceutical syringe testing:
• AD Syringe (2ml): Complete testing, including the Re-use Prevention Feature Test, for compliance with ISO ...

MULTIPLE TESTING

MULTIPLE PRODUCTS
Start-Up  Company needs Medical Device Biological Laboratory for producing and testing allograft prototypes.

MULTIPLE TESTING

South America Medical Device Laboratory needed for AAMI testing for disposable surgical gowns.

URGENT

MULTIPLE PRODUCTS

BUDGET APPROVED ($5,000-$10,000)

SOUTH KOREA Medical devices laboratory needed for thermal effect testing of disc decompression p...

URGENT
MULTIPLE TESTING & SAMPLES
Third-party medical devices testing lab (India-based preferred) needed to conduct transportation and storage simulation tests for Yankauer ...

Medical Device Laboratory for validation of the reprocessing protocol of a reusable medical device (Surgical dental retractor - critical device). Manual cleaning, disinfection...

Contract laboratory needed to perform ASTM Testing to ASTM F3574 (Standard Test Methods for Sacroiliac Joint Fusion Devices) test on an SI (sacroiliac) construct.

URGENT
US Independent medical device testing lab (Chicago-based preferred) needed for testing an infusion pump for failure and or improper calibration

URGENT
Asia Contract Sterilizer needed for testing e-beam compatible medical device components at (50-60) kiloGrays or (2x 25) kiloGrays (kGy).

MULTIPLE TESTING
Contract Medical Device Laboratory needed for ISO 10993 testing on Class IIb medical devices, concentrates for bicarbonate hemodialysis:
- Evaluation of the...

BUDGET APPROVED ($10,000-$25,000)
MULTIPLE TESTING
Large eyewear and lenses supplier needs an accredited contract laboratory to conduct oxygen permeability testing of 12-15 ...

Contract Research Organization CRO needed to run a porcine model animal study to compare performance with our synthetic dental bone graft material against a predicate device. ...

California Laboratory to test how their reinforced medical tubing product can be seen under x-ray and fluro in comparison to our competitor products.

Indonesia-based independent service provider needed for Ethylene Oxide Sterilization.
BUDGET APPROVED ($5,000-$10,000)

Independent Regulatory Consultant needed in medical devices on the following :
- ISO 11737-1 and 2 (Sterilization of health care products)
- ISO 10993 (Biological evaluation...

Medical Device Laboratory needed for multiple testing of balloon dilator catheter and microcatheter, both of which are in direct contact with blood.
The test we plan to do be...

Animal lab needed for medical device training course and R&D testing. Will need two lab stations with C-arms and classroom space for 25 people.
Looking for a location close ...

MULTIPLE TESTING
Contract Laboratory needed for ISO Zinc content and Phosphate content testing of a powdered pigment to ISO 6745 Implants for surgery. Metal bone screws with ...

USA Contract Microbiology Laboratory needed for ophthalmic medical device research study
Aim 1: Assess effectiveness of UV-C disinfection on reducing pathogen load (BS 8628 p...

MULTIPLE TESTING
USA Medical Device Laboratory needed for ANSI AAMI Cleaning Validation testing for an intubation device to reprocessing level: Clean as per ANSI AAMI ST98:20...

Medical Device Laboratory needed for shelf-life performance testing of Dental Burs and files: Carbide, Endo and Diamond.
? Number of shippers:
o 8 inner boxes
o 3 outer box...

USA Bioanalytical Laboratory needed for denaturation testing of collagen bovine wound dressing to perform an evaluation of whether or not the protein denatures over time. Cir...

Medical Device Company needs Contract Laboratory for TOC testing of our Deionized water system with a certificate with results.

MULTIPLE PRODUCTS
Contract Laboratory needed for deformulation of intravascular catheters and applicable coatings by FTIR, NMR, DSC, HPLC, XRD

MULTIPLE TESTING
MULTIPLE PRODUCTS
USA Contract Laboratory needed for contact testing for the amounts of Fluoropolymers, or PFAs, and organic fluorine in different brands of...

USA LABORATORY
NEW PRODUCT DEVELOPMENT
USA Medical Device Laboratory needs Bioanalytical Laboratory for residual cross-linker detection analysis for lyophilized collagen med...

MULTIPLE TESTING
FDA GLP Medical Device Laboratory needed for ISO performance, safety, and biocompatibility testing of a new oxygenator model designed for use with CPB Cardio...

MULTIPLE TESTING
Orthopedic Implant Manufacturer needs Medical Device Laboratory for the following biomechanical testing:
- Static Compression
- Flexion - Extension moment...

Accredited Medical Device Laboratory needed for ISO testing of contact lenses for water content. I according to ISO 18369-4 Ophthalmic optics, Contact lenses Part 4: Physicoc...

USA LABORATORY
LONG TERM TESTING
Contract Laboratory needed for centrifuge performance testing.
The lab needs to have a pool of human blood donors willing to provide 25...

MULTIPLE TESTING
Contract Medical Laboratory needed for testing Gel like material as per the following list:
following tests will be performed on the gel-like material wit...

United States Preclinical Contract Research Organization needed for FDA / ISO biocompatibility Study testing of ex vivo porcine belly skin damage from an electrosurgical pen p...

MULTIPLE TESTING
MULTIPLE PRODUCTS
Accredited Medical Device Laboratory needed for ISO testing of Dental Products:
- ISO 10477: Depth of cure, surface finish, flexural stre...

Medical Device Laboratory needed for ISO Testing of Dental Unit waterline according to ISO 16954:2015: Dentistry-test methods for dental unit waterline biofilm treatment.

MULTIPLE TESTING
Contract Medical Device Laboratory needed for controlled environment (atmospheric pressure, temperature, humidity, backpressure, etc) volumetric accuracy te...

Medical Device Laboratory needed for medical implantable distal end radius plate mechanical testing consisting of plate, screw, and staples. Note : We want to conduct mechani...

LONG TERM TESTING
Large Corporation needs Pharmaceutical Laboratory for impurity level testing under 5 ppm of 3M HFE 7000 Engineered Fluid by GC/MS (Gas Chromatography Mass S...

MULTIPLE TESTING
Medical Device Laboratory needed for ISO design verification testing of endosseous dental implants in compliance with ISO 14801 Dentistry ? Implants ? Dyn...

APPROVED BUDGET
SWITZERLAND, GERMANY, FRANCE OR UK LABORATORY
Large Company needs ISO 17025 Accredited Laboratory for ISO contact lens water testing in compliance with ISO...