Pressure volume temperature (PVT) and Surface Sample analysis
Project Description
Oil Laboratory needed for Pressure volume temperature (PVT) analysis PVT and surface samples analysis for pressurized samples. I will release ore details on quantity of bottles and job details after quotation is granted, below it is a list of analysis required.
We will require PVT analysis for pressurized samples as below:
Thermal Restoration of the sample to reservoir condition (Pres 51.64 MPa (7490 psia) and Temp 120.51 C (249 F)) for sample validation
Reservoir fluid,
evolved gas,
stabilized oil composition up to C36+ with splitting of cyclos HCs and BTX:
Cylco 5,
Cyclo 6,
M Cyclo 5,
M Cyclo 6,
Benzene,
Toluene,
C2 Benzene,
M&P Xylene,
O Xylene
We will also require analysis for surface samples
API Gravity
Crude density, Kg/m3
Crude Molecular Weight
H2S
Mercaptan Sulphur
Total Acid Number
Ash Content
Arsenic
Sediment
Carbon Residue
Total Chloride
Flash Point
Total Nitrogen
Basic Nitrogen
Pour Point
Salt Content
Sediment by Extraction
Sulphur Content
Water Content
Wax Content
Asphaltene Content
Nickel
Vanadium
Copper
Iron
Lead
Microcarbon Residue
Mercury
Viscosity at temparature, cSt & cP (Kinematic & Dynamic), Temperature range from 10°C to 90°C with 5°C step.
Preparing Final Report (as specified in clause 5 (DELIVERABLES)
Project Information
Number:20-00156
Industry:Oil and Petroleum
This request is closed and is no longer accepting quotes.
Register or Log In
to receive alerts when similar requests open in the future.
Other oil and petroleum laboratory services.
Other Oil and Petroleum testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs include :
- AOCS Biodiesel Testing
- API Gravity of Crude Petroleum Products Testing
- ASTM Testing
- Acid Number Testing
- Acid Number Testing
- Acrylates Testing
- Acrylic Crazing Testing
- Alcohol Testing
- Alkalinity Testing
- Amines Testing
- Aniline Point Testing
- Anti-Icing Additive Testing
- Aromatics Olefins Testing
- Arsenic Content Testing
- Ash from Petroleum Products Testing
- Asphaltenes Testing
- BOCLE Lubricity Testing
- BTU Testing
- Benzene Content Testing
- Biodiesel Feedstock Evaluations Testing
- Biodiesel Fuel Blend Stock for Distillate Fuels Testing
- Borehole Stability Analysis Testing
- Bromine Index Testing
- Bromine Number Testing
- Burning Quality of Kerosene CAEAL Testing
- CFD Analysis Testing
- Carbon Residue Testing
- Carbon Residue Testing
- Catalyst Evaluation Testing
- Cetane Number Testing
- Characterization of Crude Oils Testing
- Cloud Point Testing
- Cloud Point Testing
- Cold Cranking Simulator Testing
- Cold Filter Plugging Testing
- Comparative Motor Oil Testing
- Computational Fluid Dynamics (CFD) Testing
- Condensate Analysis Testing
- Condensates Composition Testing
- Congealing Point of Petroleum Waxes Testing
- Copper Corrosion Testing
- Corrosion Testing
- Crude Oil Assays Testing
- Demulsibility Characteristics Testing
- Depentanization of Gasoline and Naphthas Testing
- Detailed Hydrocarbon Analysis Testing
- (DHA) Testing
- Determination of the Aromatic Content and Polynuclear Aromatic Content Testing
- Dissolved Gas Monitoring Testing
- Distillation Residues Testing
- Distillation Testing
- Drainage Area Range Testing
- Drilling and Completions Testing
- Drivability Index Testing
- Driveability Index Testing
- Drop Melting Point of Petroleum Wax Testing
- EN14214 Biodiesel Testing
- Elemental Analysis Testing
- Environmental Core Analysis Testing
- Ethane Testing
- Evaporation Loss of Lubricating Greases and Oils Testing
- Existent Gums Testing
- Extractable Oil Content Testing
- Flash Point Testing
- Fluid Extraction Testing
- Foam Testing
- Foaming Characteristics Testing
- Free Glycerine Testing
- Free and Total Glycerin Testing
- Freezing Point Testing
- Fuel Explosiveness Testing
- Fuel Lubricity Testing
- Fuel Lubricity Testing
- Gas Gravity Gas Molecular Weight Testing
- Gas Separation Testing
- Geomechanical Studies Testing
- Compressional (Vp) Wave Velocities Testing
- Fracture Strength Testing
- Poissonâ??s Rate Testing
- Pore Volume Testing
- Shear (Vs) Wave Velocities Testing
- Youngâ??s Modulus Glow Measurement Testing
- Glycol Analysis Testing
- Glycols Testing
- Gross Heat Value Testing
- Gum Content Testing
- Haze Rating Testing
- Heat of Combustion Testing
- Heavy Distillates Testing
- High Temperature/High Shear Test (HTHS) Testing
- Hydrocarbon Analysis Testing
- Hydrocarbons Type Testing
- Hydroxyl Value Testing
- Impurities Testing
- Inhibitor Content Testing
- Insoluble Impurities Testing
- Interfacial Tension Testing
- Isolation of Representative Saturates Testing
- Fraction From High-Olefinic Testing
- Petroleum Naphthas Testing
- Jet Fuel Degradation Testing
- Jet Fuel Doctor Testing
- Karl Fischer Moisture Testing
- Kauri-Butanol Value of Hydrocarbon Solvents Testing
- Kinematic Viscosity Testing
- Kinematic Viscosity Testing
- Lead Content Testing
- Lead Reactivity Testing
- Lead Reactivity Testing
- MSEP (Microsepararometer Index) Testing
- Membrane Filtration Testing
- Mercaptan Sulfur in Gasoline Testing
- Kerosene Testing
- Aviation Turbine Testing
- and Distillate Fuels Testing
- Metals Testing
- Metals in Crude Testing
- Methane Testing
- Middle Distillates Testing
- Naphthalenes Testing
- Needle Penetration of Petroleum Waxes Testing
- Net Heat Value Nitogen Content Testing
- Noncondensable Gas Testing
- Nonvolatile Matter Testing
- Octane Number Testing
- Octane Number Testing
- Oil Content of Petroleum Waxes Testing
- Oil Field Surveillance Oxidation Stability Testing
- Oxidation Stability Testing
- Paraffins Testing
- Particulate Contamination Testing
- Peroxide Number Petrography Testing
- Petroleum Barge Inspection Testing
- Petroleum Cargo Inspection Services Petroleum Cargo Inspection Testing
- Petroleum Refinery Inspection Testing
- Petroleum Tank Storage Inspection Testing
- Petroleum Tankard Inspections Testing
- Petrophysical Core Analysis Testing
- Photomicrography Physical Testing
- Pipeflow Technology Testing
- Pipeline Inspection Testing
- Pour Point Testing
- Pour Point of Petroleum Oils Testing
- Pressurized Gas Analysis Testing
- Process Chemistry Testing
- Propane Analysis Testing
- R+M/2 (Antiknock Index) Testing
- Ramsbottom Carbon Residue Testing
- Ramsbottom Carbon Residue Testing
- Reid Vapor Pressure Testing
- Relative Density Testing
- Residual Matter Testing
- Rust-Preventing Characteristics Testing
- Salt Content Testing
- Salt Content Testing
- Saponification Number Testing
- Saybolt Color Determination Testing
- Sediments in Crude Oil Testing
- Siesmic Surveys Smoke Point Testing
- Smoke Point in Jet Fuel Testing
- Solidification Point Testing
- Solidification Point of Petroleum Wax Testing
- Solvent Extractables in Petroleum Waxes Testing
- Specific Conductance Testing
- Stability of Distillate Oils Testing
- Stimulation and Production Testing
- Subsurface sampling Testing
- Sulfur Content Testing
- Tank Calibration Testing
- Thermal Oxidation Stability (JFTOT) Testing
- Thermal Oxidation Stability Testing
- Thermal Stability Testing
- Thin Film Oxygen Uptake Testing
- - TFOUT Testing
- Total Aromatics Testing
- Total Base Number Testing
- Total C6 carbon Testing
- Total C7 carbon Testing
- Total dissolved/suspended solids (TDS/SS) Testing
- Trace Metals Testing
- Turbidity Testing
- Types of Hydrocarbons Testing
- Vapor Pressure Testing
- Vapor Pressure Testing
- Viscosity-Gravity Constant Testing
- Volatility Testing
- Water Content Testing
- Water Miscibility Testing
- Water Separability of Petroleum Oils and Synthetic Fluids Testing
- Water Tolerance Testing
- Water compatibility Testing
- Wax Content of Petroleum Oils and Asphalts Testing
- Weathering Constant Testing
- pH Testing
- Alkalinity or Acidity Testing
