Molecular Sieve Testing (Crushing Strength, Adsorption Capacity and LOI)

Project Description

MULTIPLE PRODUCTS
MULTIPLE TESTING
Analytical Chemistry Laboratory needed for Molecular Sieve Testing for Crushing Strength, Adsorption Capacity and Loss on Ignition (LOI) Analysis:

1- Water static adsorption at 10% relative humidity.
2- Particle Crushing Strength.
3- Loss on ignition (at 950°C).

Project Information

Number:23-00479

Industry:Oil and Petroleum

This request is closed and is no longer accepting quotes. Register or Log In to receive alerts when similar requests open in the future.

Other oil and petroleum laboratory services.

Other Oil and Petroleum testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs include :

AOCS Biodiesel Testing

API Gravity of Crude Petroleum Products Testing

ASTM Testing

Acid Number Testing

Acrylates Testing

Acrylic Crazing Testing

Alcohol Testing

Alkalinity Testing

Amines Testing

Aniline Point Testing

Anti-Icing Additive Testing

Aromatics Olefins Testing

Arsenic Content Testing

Ash from Petroleum Products Testing

Asphaltenes Testing

BOCLE Lubricity Testing

BTU Testing

Benzene Content Testing

Biodiesel Feedstock Evaluations Testing

Biodiesel Fuel Blend Stock for Distillate Fuels Testing

Borehole Stability Analysis Testing

Bromine Index Testing

Bromine Number Testing

Burning Quality of Kerosene CAEAL Testing

CFD Analysis Testing

Carbon Residue Testing

Catalyst Evaluation Testing

Cetane Number Testing

Characterization of Crude Oils Testing

Cloud Point Testing

Cold Cranking Simulator Testing

Cold Filter Plugging Testing

Comparative Motor Oil Testing

Computational Fluid Dynamics (CFD) Testing

Condensate Analysis Testing

Condensates Composition Testing

Congealing Point of Petroleum Waxes Testing

Copper Corrosion Testing

Corrosion Testing

Crude Oil Assays Testing

Demulsibility Characteristics Testing

Depentanization of Gasoline and Naphthas Testing

Detailed Hydrocarbon Analysis Testing

(DHA) Testing

Determination of the Aromatic Content and Polynuclear Aromatic Content Testing

Dissolved Gas Monitoring Testing

Distillation Residues Testing

Distillation Testing

Drainage Area Range Testing

Drilling and Completions Testing

Drivability Index Testing

Driveability Index Testing

Drop Melting Point of Petroleum Wax Testing

EN14214 Biodiesel Testing

Elemental Analysis Testing

Environmental Core Analysis Testing

Ethane Testing

Evaporation Loss of Lubricating Greases and Oils Testing

Existent Gums Testing

Extractable Oil Content Testing

Flash Point Testing

Fluid Extraction Testing

Foam Testing

Foaming Characteristics Testing

Free Glycerine Testing

Free and Total Glycerin Testing

Freezing Point Testing

Fuel Explosiveness Testing

Fuel Lubricity Testing

Gas Gravity Gas Molecular Weight Testing

Gas Separation Testing

Geomechanical Studies Testing

Compressional (Vp) Wave Velocities Testing

Fracture Strength Testing

Poissonâ??s Rate Testing

Pore Volume Testing

Shear (Vs) Wave Velocities Testing

Youngâ??s Modulus Glow Measurement Testing

Glycol Analysis Testing

Glycols Testing

Gross Heat Value Testing

Gum Content Testing

Haze Rating Testing

Heat of Combustion Testing

Heavy Distillates Testing

High Temperature/High Shear Test (HTHS) Testing

Hydrocarbon Analysis Testing

Hydrocarbons Type Testing

Hydroxyl Value Testing

Impurities Testing

Inhibitor Content Testing

Insoluble Impurities Testing

Interfacial Tension Testing

Isolation of Representative Saturates Testing

Fraction From High-Olefinic Testing

Petroleum Naphthas Testing

Jet Fuel Degradation Testing

Jet Fuel Doctor Testing

Karl Fischer Moisture Testing

Kauri-Butanol Value of Hydrocarbon Solvents Testing

Kinematic Viscosity Testing

Lead Content Testing

Lead Reactivity Testing

MSEP (Microsepararometer Index) Testing

Membrane Filtration Testing

Mercaptan Sulfur in Gasoline Testing

Kerosene Testing

Aviation Turbine Testing

and Distillate Fuels Testing

Metals Testing

Metals in Crude Testing

Methane Testing

Middle Distillates Testing

Naphthalenes Testing

Needle Penetration of Petroleum Waxes Testing

Net Heat Value Nitogen Content Testing

Noncondensable Gas Testing

Nonvolatile Matter Testing

Octane Number Testing

Oil Content of Petroleum Waxes Testing

Oil Field Surveillance Oxidation Stability Testing

Oxidation Stability Testing

Paraffins Testing

Particulate Contamination Testing

Peroxide Number Petrography Testing

Petroleum Barge Inspection Testing

Petroleum Cargo Inspection Services Petroleum Cargo Inspection Testing

Petroleum Refinery Inspection Testing

Petroleum Tank Storage Inspection Testing

Petroleum Tankard Inspections Testing

Petrophysical Core Analysis Testing

Photomicrography Physical Testing

Pipeflow Technology Testing

Pipeline Inspection Testing

Pour Point Testing

Pour Point of Petroleum Oils Testing

Pressurized Gas Analysis Testing

Process Chemistry Testing

Propane Analysis Testing

R+M/2 (Antiknock Index) Testing

Ramsbottom Carbon Residue Testing

Reid Vapor Pressure Testing

Relative Density Testing

Residual Matter Testing

Rust-Preventing Characteristics Testing

Salt Content Testing

Saponification Number Testing

Saybolt Color Determination Testing

Sediments in Crude Oil Testing

Siesmic Surveys Smoke Point Testing

Smoke Point in Jet Fuel Testing

Solidification Point Testing

Solidification Point of Petroleum Wax Testing

Solvent Extractables in Petroleum Waxes Testing

Specific Conductance Testing

Stability of Distillate Oils Testing

Stimulation and Production Testing

Subsurface sampling Testing

Sulfur Content Testing

Tank Calibration Testing

Thermal Oxidation Stability (JFTOT) Testing

Thermal Oxidation Stability Testing

Thermal Stability Testing

Thin Film Oxygen Uptake Testing

- TFOUT Testing

Total Aromatics Testing

Total Base Number Testing

Total C6 carbon Testing

Total C7 carbon Testing

Total dissolved/suspended solids (TDS/SS) Testing

Trace Metals Testing

Turbidity Testing

Types of Hydrocarbons Testing

Vapor Pressure Testing

Viscosity-Gravity Constant Testing

Volatility Testing

Water Content Testing

Water Miscibility Testing

Water Separability of Petroleum Oils and Synthetic Fluids Testing

Water Tolerance Testing

Water compatibility Testing

Wax Content of Petroleum Oils and Asphalts Testing

Weathering Constant Testing

pH Testing

Alkalinity or Acidity Testing

Learn more about oil and petroleum testing and research

Molecular Sieve Testing (Crushing Strength, Adsorption Capacity and LOI)

Project Description

Project Information

Test Request: 25-00943

Test Request: 25-00818

Test Request: 25-00763