NEED LABORATORIES OR LAB SUPPLIERS?

ARE YOU A LABORATORY OR LAB SUPPLIER?

SUPPORT

Questions / Comments?
Call 1-855-377-6821or

Laboratory Test Requests

Most Recent Electronics Laboratory Test Requests

Submit Electronics Laboratory Requests

Contract Laboratory has received the following Electronics Laboratory Test Requests which need to be fulfilled! These Electronics Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Electronics Laboratory Test and Scientific Research. If you need a Electronics Laboratory, please Submit a Electronics Laboratory Test Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

IEC Interrupting Current of Clamp

Electrical Laboratory needed for IEC Testing of interrupting current of clamp for earthing set in accordance with IEC 61230 Live working - Portable eq... View More

IEC Lightning Protection Certification Testing

Company involved in the lightning protection and grounding business would like Electrical Laboratory for IEC 62561-1 Lightning protection system compo... View More

Electronics Product Development and certification

PRODUCT DEVELOPMENT Electrical Certification Laboratory needed for product development and UL certification of a new insect killer aluminum lampholde... View More

Electric Polyester Heating Element

USA Product Safety Laboratory needed for multiple tests on electric polyester heating element including:

CSA, NEC/CEC, NFPA 70,CSA CEC 22.1
IEEE 2... View More

Medical Equipment IEC Certification

ILAC accredited Laboratory needed for IEC Electrical Certification and EMC testing on two different types of Medical Equipment.

Monitor Pre-config... View More

IEC Fiber Optic Testing

Fiber Optic Manufacturer needs Electrical Laboratory for IEC Compliance Testing to :IEC G653 xxxx - standard single mode.
View More

IEC High Voltage Detector Testing

Electrical Laboratory needed for IEC high voltage detector testing based on IEC61243-1 Live working - Voltage detectors - Part 1: Capacitive type to b... View More

FDD Declaration of Conformity for New Consumer Wireless Device

Electrical Laboratory needed for pre-scan and testing for FCC Declaration of Conformity for a new consumer wireless electronic device.connected in ra... View More

IEC Overhead Line Testing

Industrial Laboratory needed for IEC Testing of overhead lines according to IEC 61284 Overhead lines - Requirements and tests for fittings. The follow... View More

ISO Humidification output test and resistance

Electronics Company needs Laboratory for ISO Humidification output test and resistance to Flow test for the HME and HMEF according to ISO 23328 and I... View More

] Electronic Action Toy Testing

CSPC Consumer Products Laboratory needed for CSPC and FCC Certification Testing on electronics action toy whcih is made of muliple electronics mounte... View More

Cable Compression Connection Testing

Industrial Laboratory needed for cable compression connection testing on 750MCM cable with compression lug.
The test connections shall then be heate... View More

LED Ingress Protection IP Certification

LED Lights Company needs Industrial Laboratory for IP44, IP65, and IP66 certification of 4 types of light products:
1. Downlights
2. Linear Lights ... View More

IEC Electromagnetic compatibility (EMC) testing

Italy or Europe NATA Electrical Testing Laboratory with mutual recognition agreement in place for RCM Mark and IEC EMC testing to IEC61000-6-2 and IE... View More

GSA FIPS 201 Evaluation

Electrical Laboratory needed for GSA FIPS 201 Evaluation of Electromagnetically Opaque Sleeve

View More

Volkswagon Automotive Electrical Load Testing

Automotive Laboratory needed for automotive electronics following VW80000 standard Automotive Standards for Electrical Load testing. View More

IEC Lighting Ballast Label Durability

Accredited Electrical Laboratory needed for IEC lighting ballast label durability test in accordance with ยง7.2 of IEC 61347-1 (2015 ed.) Standard Lamp... View More

Constant Acceleration Testing of Weather Antenna

Large Corporation needed for ISO constant acceleration testing commercial systems weather radar antenna assembly at a functional air transport level. ... View More

IEC Lightning Protection System Components Evaluation

Electrical Laboratory needed for IEC Evaluation of Lightning protection system components (LPSC) to IEC 62561-7 Requirements for earthing enhancing co... View More

Infrared Incandescent Bulb Performance Evaluation

Retailer need Electrical Laboratory for performance evaluation of infrared incandescent bulbs with a series of confirmatory specification tests done ... View More

Refrigerator Energy Conservation Standards

Large corporation needs Laboratory for certification of refrigerators fridges in accordance with US 10 CFR 430.32 Energy and Eater Conservation Stand... View More

IEEE Substation Grounding Qualification

Electrical Laboratory needed for total IEEE Testing to IEEE 837-2014 IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding View More

IEC Partial Discharge Testing

Electrical Laboratory needed for IEC partial discharge testing of electronic component optocouplers to IEC 60747-5-5 Semiconductor devices - Discrete ... View More

Integrated Circuit Authenticity

Large Corporation needs Electrical Laboratory for authenticity testing of Integrated circuits to determine they are not counterfeit or refurbished p... View More

UL DC short circuit test

Large Industrial Company needs Electrical Laboratory for UL DC short circuit testing at 1500VDC View More

HALT / HASS Testing

Technology Company needs Electrical Laboratory for Highly Accelerated Stress Screening HASS / Highly Accelerate Life Test HALT HALT Testing of elect... View More

IEC Design Testing of High Voltage Equipment

Electrical Laboratory needed for IEC design testing to IEC61109 of High Voltage Equipment insulators
View More

Generator CENELEC Compliance

Industrial Laboratory needed for European Committee for Electrotechnical Standardization CENELEC compliance testing for generators.
View More

Air Conditioner Energy Performance Test

Industrial Laboratory needed for split unit air conditioner energy performance testing in conformance with standard
(AS/NZS 3823.1.1:1998 ,AS/NZS 38... View More

LED Bulb Star Rating Testing

LONG-TERM Third-Party Laboratory needed for star rating of LED bulbs under IS 16102-1: Self - Ballasted LED Lamps for General Lighting Services, Part ... View More

UL Photovoltaic Testing

Third-Party Laboratory needed for UL testing of Photovoltaic panels to UL2703 Standard for Mounting Systems, Mounting Devices, Clamping/Retention Devi... View More

ANSI Flashlight Testing

Performance Laboratory needed for ANSI testing of a flashlight to ANSI/PLATO FL1, Flashlight Performance Guidelines. We need light output levels teste... View More

Acute Toxicity 6-Pack

Electronics Company needs Toxicology Laboratory for complete acute toxicity six pack study testing of a single fluid formulation. View More

Copper Cathode Safety Testing

Power company needs electrical laboratory for electrical safety testing of 300MT of copper cathode. View More

UV Sensor

Manufacturer needs test house for performance testing of UV sensor fabrication View More

Monomer Analysis in Polymer

Large electronics company needs Polymer Laboratory for analysis of polymer materials to analyze the spectra and identify 7 monomers in the polymer tog... View More

Rectifer Regulator Load

Performance Laboratory needed for testing ten 60 Amp rectifier regulators at 80% load for 2000 hours. A testing rig will need to be created to hold t... View More

Certification of On-Grid Solar Inverter

Electrical Laboratory needed for EN and IEC certification testing of on-grid solar inverter to the following specifications


1. IEC62109-1; IEC621... View More

Corrosion Testing

URGENT ISO certified Laboratory needed for IEC corrosion testing for electrical components according to the following conditions
1. H2S accordi... View More

IEC 60855 and IEC 62193 Testing

Large Corporation needs Electrical Laboratory for certification of IEC 60855 Live working - Insulating foam-filled tubes and solid rods & IEC 62193 ... View More

IEC Compliance of Medical Electrical Equipment

Electrical Laboratory needed for IEC compliance testing to IEC 60601-2-47 Medical electrical equipment - Part 2-47: Particular requirements for the ba... View More

Electronic Component XSP

Third-Party Laboratory needed for XSP ( x-ray photo-electron spectroscope) for testing for surface contamination for electronic components View More

BIS Compliance Vibration Testing

Industrial Laboratory needed for vibration testing required as per IS 11037 Electronic type fan regulators including Clause no 9.3.13.4:
Sweep frequ... View More

Performance Verification Testing

Performance Test Laboratory needed to verify the physical performance of spirometer as per ATS/ERS guideline: Standardisation of spirometer, View More

Automotive Lighting Systems

Industrial Laboratory needed for testing and evaluation of automotive lighting systems, lamps and mirrors. This testing includes assisting in the dev... View More

Transformer Certification Testing

Internationally Recognized Independent Electrical Laboratory needed for certification testing of many transformers starting from 50 KVA up to 2500 KVA... View More

Optical Testing

Large Innovative Electronics Company needs Materials Laboratory for wavefront optical testing. View More

Lighting Manufacturer needs Consumer Products Laboratory for UL Certification Testing for chandelier. All components and wires and sockets are UL but ... View More

Automotive Laboratory needed for electrical testing and possible development of a product that connect to a van sliding door and when the door is clos... View More

Large Corporation needs experienced Electrical Laboratory needed for IEC Testing for Corona and Radio Interference Voltage (RIV) and heat Cycle testi... View More

Electrical Laboratory needed for circuit breakers testing for time-current curve characteristics View More

Electrical Certification Laboratory needed for electrical certification testing of various telecommunication devices
including BT/Wi-Fi Transmitter... View More

Electrical Laboratory needed for IEC testing of a linear accelerator according to IEC6060-2-1 & IEC60976 that use to radiotherapy and another produce ... View More

Electrical Laboratory needed for resistivity testing of pellets including impedance vs frequency data for nuiquist plots
dc current voltage chracteri... View More

Consumer Products Laboratory needed for quality evaluation of various small home appliances with QC issues. View More

CE Certifying Laboratory needed to complete Class A CE certification View More

Wearables Manufacturer needs Nanotechnology Laboratory needed for testing the negative ion/anion levels of a wearable clothing fabric. View More

Third-Party Laboratory needed for disassembly, examination and testing of headphones for loose staples after consumer report of two staples fell out ... View More

Electrical Laboratory needed that is accredited to test in accordance to IEC 62287-1 Maritime navigation and radiocommunication equipment and systems ... View More

Laboratory needed for Energy Star verification testing on Imaging Equipment View More

ISO 17025 Accredited Laboratory needed for DIN testing of Messenger Wire according to DIN 48201, Dropper Wire, DIN 43138, Contact Wire and according ... View More

Automotive Laboratory needed for SAE emergency vehicle siren testing to SAE J1849 Latest Revision
Emergency Vehicle Sirens (STABILIZED Oct 2012), ?Su... View More

Electrical Laboratory needed for fir safety of electrical radiant heating systems and its ability to start a fire when installed in domestic or Comme... View More

URGENT Electrical Laboratory needed for UL power and control cable testing for arcing resistance performance to UL Garage Spec 201 Sec 77 Cable Arcing... View More

URGENT / LONG-TERM TESTING Materials Laboratory needed to measure the AR coating on windows and lenses at 1590 and 1877 nm in the 0.05 - 0.2% range b... View More

Independent, Third-Party Laboratory needed for LED lighting performance comparison study for a couple of LED lighting products in order to make a qual... View More

Power equipment manufacturer needs Analytical Chemistry Laboratory to identify and quantify the species of organic and inorganic content contained in ... View More

Electronics Manufacturer needs electrical certification laboratory for EMC Testing of cabling to CE102 - Power Leads (10 kHz to 10 MHz) View More

Electrical laboratory needed for SAE testing to SAE J560, Primary and Auxiliary Seven Conductor Electrical Connector for Truck-Trailer Jumper Cable View More

Laboratory needed for testing high definition thermal IR camera to measure the Tj for LEd and Driver IC.Target size .5mm including turn on device fo... View More

Electrical laboratory needed for UL 1072 dry dielectric test View More

Electrical laboratory needed with the capability for testing specialized circuit breakers at 600VDC, 16kA, 50ms duration. Inductance <30uH, 50uH, 100... View More

LONG-TERM Laboratory needed for IS appliance testing of free-standing gas cooktops as per IS 4246:2002 Domestic Gas Stoves For Use With Liquefied Petr... View More

Laboratory needed for ultrasonic sensor testing to standard EN 14236 Ultrasonic domestic gas meters. This kind of test involve the characterization ... View More

Electrical laboratory needed for IEC testing of mechanical cable lugs to IEC 61238, Compression and mechanical connectors for power cables for rated v... View More

Electronics laboratory needed for compliance testing of telecom equipment to the Radio and Telecommunications Terminal Equipment Directive (R&TTE) R&T... View More

Electrical laboratory needed for thermal cycling test for electronic boards, about 5 x 10 cm in size View More

LONG-TERM TESTING Electrical laboratory needed for compliance testing of electrical grounding rods and accessories as per IEC 62561 standards, Lightni... View More

Accredited laboratory recognized by certifying bodies needed for ANSI testing of metal halide quartz lamp to determine if it fullfills the demands fo... View More

Medical device laboratory needed for cleaning validation study of the water cleaning cycle of a plastic covered electronic tracking device . Simulati... View More

Electrical certification laboratory needed for Electromagnetic Compatibility EMC testing for the following
Coffee maker
grill
blender
kettle
fo... View More

Consumer Products laboratory needed for customized testing of home appliances with the usage of Fabric Softener Sheet (Dryer Sheet) in cloth dryer. ... View More

Medical electrical laboratory needed for IEC testing of sterile electrosurgical products to IEC 60601-1, Medical electrical equipment - Part 1: Gener... View More

LONG-TERM TESTING Large corporation needs electrical laboratory for multiple electrical tests on refrigerator system (domestic and commercial). View More

Laboratory needed for optical testing on LCD displays. View More

Telecommunications test house needed for UWB radio transmitter testing to measure the power and spectrum to EN 302065 Electromagnetic compatibility an... View More

Physical laboratory needed for basic drop/vibration ISTA testing of a lamp packaging in single parcel - 16. View More

Electrical laboratory needed for BS testing of railway cable insulator to BS EN 62621:2016+A1, Railway applications. Fixed installations. Electric tra... View More

Electrical laboratory needed for comparison study of two light products for distribution of light, light intensity, and energy output. View More

Electrical laboratory needed for MIL-STD electromagnetic and electrostatic testing of ten cable assemblies View More

Acoustics laboratory needed fo racoustics testing of consumer electronics audio products for SPL, distortions, frequency graphs, power graphs, electr... View More

Electrical laboratory needed for IEC testing of ladder cable tray under IEC to EN 61537:2001 Cable tray systems and cable ladder systems for cable man... View More

ISO laboratory for full electrical testing of LED , street lights and flood lights . View More

Experienced food laboratory needed for nutritional comparison study of food blended with two different blenders. Study to compare the nutritional valu... View More

NABL Electrical laboratory needed for IEC electrical continuity testing as per IEC 61537 cable management - cable tray systems and cable ladder system... View More

Electrical laboratory needed for AITM testing of wires /cables 1) AITM 2.0008A Smoke Density Electrical Wire/Cable for Power Supply, 2) AITM 2.0008B S... View More

NABL electrical laboratory needed for IEC testing of cable tray as per IEC 61537 Standard: Cable Management - Cable Tray Systems and Cable Ladder Sys... View More

Electrical laboratory needed for IEC testing of transformers to IEC 61869-1, Instrument transformers and IEC 61869-2, Instrument transformers - Part ... View More

Importer needs electrical laboratory for certification testing of 3 x 5 coated cable. View More

Laboratory needed for waterproof testing of medical alert device to International Electrotechnical Commission (IEC) IP code rating IPX6. View More

Electrical laboratory needed for cable testing as per IEC 61537, Cable management - Cable tray systems and cable ladder systems
View More

Electrical laboratory needed for ionic cleanliness testing of electronic component as per IPC-TM-650, method 2.3.28, Ionic Analysis of Circuit Boards... View More

Laboratory needed for IEC environmental simulation testing of electrical enclosures including corrosion tests in artificial atmospheres and salt spray... View More

Electrical laboratory needed for IEC testing of electronics to IEC 60730-1: Automatic Electrical Controls for Household and Similar Use View More

LONG-TERM TESTING Electrical laboratory needed for IEC testing of electrical connectors as per IEC 61238 for current cycle View More

University researcher needs physical laboratory for doppler radar vibration measurement of sensor, receiver and software to model the receiving data a... View More

Electrical laboratory needed for inductor testing to AC + DC load life testing of three production lots

1 3 separate lots of 77pcs each
2 Chambe... View More

LONG-TERM TESTING Lighting manufacturer needs physical laboratory for SAE and NFPA certification testing of LED lighting products to SAE J595, SAE J8... View More

Large technology company needs electrical laboratory needed for IEC fire testing of dry transformer to IEC 60076-11 F1 Fire Resistance View More

Large lighting company needs electrical laboratory for high voltage (10-12 kV) electrical fast transient testing. View More

Electrical laboratory needed for ASTM testing of U-PVC cable ducts for shore hardness (type D) to ASTM D 2240, coeffecient of linear thermal expansion... View More

Electrical laboratory needed for electrical certification and acceptance testing of transformers, arresters, and switches including current transforme... View More

Electrical laboratory needed for IEC transformer testing of 72.5KV/145KV current transformer and voltage transformer according to IEC standard at a f... View More

ISO 17025 certified laboratory needed for OECD physical / chemical testing of solid materials and an octanol / water solution as per three OECD standa... View More

Large company needs laboratory for UL Tilt Test - UL certification for custom kiosks means the stability of the units. These tests are known as the s... View More

Oil Laboratory needed for ASTM testing of dielectric mineral oil to ASTM D 3487-09 Specification for Mineral Insulating Oil Used in Electrical Apparat... View More

Contract laboratory needed for accelerated product life testing on turnkey automation and lighting solutions used in hospitality industry. View More

Large electronics company needs product safety laboratory for fall hazard, structural integrity / physical stability / product safety testing of a com... View More

Electrical laboratory needed for SAE external ignition testing of small marine electrical equipment for use in the marine industry to SAE J1171, Exter... View More

Electrical certification laboratory needed for SAE external ignition protection testing of a small electrical device for use in marine equipment to SA... View More

Electrical laboratory needed for functional testing of integrated circuits after reballing. View More

UL certification electrical laboratory needed for UL 61010 electrical safety testing of a boiler room apparatus. View More

Large industrial technology company needs electrical laboratory for IEC electrical performance and EMC testing of electrical substation relay to IEC 6... View More

Environmental simulation laboratory needed for UV weathering testing on equipment in compliance with IEC 60068-2-5:2010 Test Sa: Simulated solar radia... View More

Telecommunications testing facility needed for near-field communication NFC standards testing of aerial cable fittings including insulated piercing co... View More

ON-SITE TESTING Electrical laboratory needed for voltage electrical safety testing. General Low Voltage below 70 Volts DC testing for the Safety of a ... View More

Electrical wiring laboratory needed for the following testing:

EPR insulation under ASTM D1149 with an ozone concentration 250 ppm through 168 hrs.... View More

Large cabling company needs a laboratory for fire resistance cable testing to BS 6387 Cat C W & Z.

1) Copper conductor, Mica tape, XLPE insulation... View More

LONG-TERM TESTING Manufacturer needs Aerospace laboratory for FAA Testing of air field lighting transformers. View More

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching tes... View More

Electrical laboratory needed for ANSI and IEC Testing: combination wave surge testing and 100 KHz EFT testing according to IEC61000-4-5 and IEC61000-... View More

Electrical laboratory needed for full scale testing of a LED light panel. View More

Materials Laboratory needed for optical testing of light diffuser sheet for Optical characteristics. View More

Research laboratory needed for optimization study on ozonators used for water treatment to define the optimal ozone amount for treatment of customer's... View More

Physical Environmental Laboratory needed with anechoic chamber for 3D antenna pattern measurements of a small unit (40 mm square) at 923.5MHz and 157... View More

US Laboratory needed for air purifier testing according to Association of Home Appliance Manufacturers (AHAM), AC -1-2015 Standard - ISO 17025 lab pr... View More

Large electronics company needs electrical laboratory for IEC Testing: cable tray testing as per IEC 61537 View More

Electrical Laboratory needed for Ingress Protection IP69K testing for an electric motor for food industry View More

Independent Consumer Products Laboratory needed for competitor analysis/ comparison study of new consumer blender to determine if new blending proces... View More

Third-Party Laboratory needed for Vibration test in accordance with standard ANSI C136.31 Standards for Roadway and Area Lighting Equipment, Luminair... View More

NABL Laboratory needed for third-party testing of bottle coolers manufactured by a supplier for storing of beer bottles. View More

Electronics Laboratory needed for Solder Joint and contamination level in assembled PCBA View More

Certification laboratory needed for BSMI certification testing of networking equipment. Please advise on 1.cost 2. lead time 3. what document we nee... View More

Test laboratory needed for SAE J1939-11 Table 7 cable tests for data cables (20 AWG). impedance and resistance, measurement of cables and shield effec... View More

Lighting manufacturer needs testing of LED light fixture to certifiy that it meets cleanroom ISO-5 and also biosafety levels 1 and 2. View More

Electrical Laboratory needed for CE Mark Testing for Cables and Wires to .H05VVH2-F
- H05VVH2-U
- H05VV-F (TTR)
- NYM
- YAVV (NAYY)
- YVV (NYY... View More

Computer Hardware company needs certification laboratory for ETSI certification testing an e-CALL modem according to multiple ETSI standards includin... View More

Physical Laboratory needed for heat exchanger testing for sound pressure level of our unit evaporator like below picture Please your information furth... View More

Lighting test laboratory in Germany & Mexico needed for airline cabin LED lighting testing for DO 160G compliance View More

Electrical laboratory needed for IEC certification testing for electrode holder, cable connector, and work clamp under IEC 60974, Arc welding equipmen... View More

Industrial Third-Party ISO 17025 Laboratory needed for IEEE, ANSI and UL Testing of 9 cables flammability and toxicity testing: FT4/IEE1202 flame pro... View More

Automotive testing for back up lighting: SAE J593 View More

Electrical lab needed for: product safety requirements testing for equipment for electrical energy measurement and control. IEC and ANSI standards View More

Electrical laboratory needed for Dielectric testing of phone accessories between 800 mhz and 4 ghz View More

Microbiology Laboratory needed for Fungus testing on Test coupons of Printed Circuit Boards PCB's View More

Electrical laboratory needed for electrical testing on new medical device prototype:
1.Ground Continuity test
2. High voltage test
3. Insulation Re... View More

Electrical laboratory needed for protoype testing: potable water testing of energy consumption and water delta, flow rates and energy of volts, amps... View More

Electrical laboratory needed for SAE Testing to SAE J1292, Automobile and Motor Coach Wiring View More

Electrical laboratory needed for Flow versus differential temperature comparison study as fuel passes a chamber with an electric heater. View More

Laboratory needed for formulation of water based pesticide and mosquito repellent using essential oils (e.g Citronella oil, Geranium oil) for use in... View More

Europe electrical laboratory needed for IEC tests on fibreoptic cables according to IEC IEC 60793-xx and 60794-xx standards: Testing fibreoptic cable... View More

Electrical laboratory needed for FCC Part 15 certification testing
View More

LABORATORY NEEDED FOR ANSI TESTING OF LED STREETLIGHT TO ANSI C136.31 VIBRATION TESTING. View More

Electrical laboratory needed for DOE Testing of beverage coolers tested for DOE 2017 requirements, NSF 7, Energy Star 4.0 and others View More

ELECTRICAL LABORATORY NEEDED FOR ANSI TESTING OF PHOTOCELL AND RECEPTACLE TO ANSI C136.10

LED STREETLIGHT ANSI C136.31 VIBRATION TESTING. View More

Independent laboratory needed for LED comparison study of 4 manufacturer's underwater LED light components to evaluate

Quality of construction ? ... View More

Electrical Laboratory needed for IEC Testing to IEC60855-1, Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-... View More

Electronics laboratory needed for conformance testing of new cctv camera testing to Government of India parameters View More

Electrical Laboratory needed for battery testing for charges of following test as per IS 1651, Stationary cells and batteries, lead-acid type (with t... View More

Physical Laboratory needed for drop and vibration testing for Expanded Polyethylene Foam EPE foam View More

Electrical Laboratory needed for EMC Testing to DO 160 Environmental Conditions and Test Procedures for Airborne Equipment for aviation products. View More

Medical Device Company needs medical technology laboratory for packaging/ product /development of developing a disposable medical cable assembly that ... View More

Materials laboratory needed for ASTM Testing to measure Hiding power of coated aluminum powder to ASTM D6441,Standard Test Methods for Measuring the H... View More

Electrical certification laboratory needed for FCC conformance testing on transportation systems. Please provide quote View More

Electrical Laboratory needed for IEC Testing to International Electrotechnical Commission
IEC 60855-1, Insulating foam-filled tubes and solid rods -... View More

ISO certified Medical Device Laboratory needed for Bio feedback system testing to 60601 CB Scheme. Possible FCC (and equivalent for EU, Japan, Brazil) View More

India Manufacturing Company needs metallurgical laboratory for silver alloy electrical contacts testing: detailed mineralogical analysis of industrial... View More

ISO 17025 accredited electrical laboratory needed for qualification testing of Medium Voltage Cables rated 5- through 46kV per AEIC CS8, Section 15 fo... View More

Europe laboratories needed for electronic waste testing to determine metal content (Cu, Au, Ag, Pd, etc) in diverse electronical wastes eg. printed ci... View More

UL, ETL, or NRTL recognized laboratory needed for certification testing of Domestic Storage Water Heaters (3 models) for export in US & Canada market ... View More

Electrical Laboratory needed for IP attestation conformity testing on our Electrical Panels as per IEC 61439-1 kindly elaborate the procedure, test ... View More

Electrical laboratory needed for Corrosion Resistance / Tensile Strength Testing (NIJ 0307.01) on 13 Samples x Metallic Handcuffs (technical specs pro... View More

Electrical Laboratory needed for Performance Testing / LED Testing on 05 Samples x Flashlights 0 (technical specs provided upon request).
View More

Electrical laboratory needed for Insulated Piercing Connector (IPC) testing to NFC33020 & NFC33004 View More

Electrical laboratory needed for Ingress Protection Testing: IP tests for an outdoor enclosure
View More

URGENT Engineering company needs laboratory for solar system testing.
View More

Pharmaceutical Laboratory needed for Real Time stability Study Testing. Storage for batches used in the real time stability studies (Chambers with 25d... View More

HVAC Air conditioning company needs physical laboratory needed for performance testing of HVAC: leakage and thermal leakage tests
View More

Accredited laboratory needed for electrical paperboard testing for compliance for type B3.1A of IEC 60641-3, Standard | Pressboard and presspaper for... View More

Electrical Laboratory needed for IEC Testing for Aluminium and nylon Cable Cleats as per attached specs IEC 61914:2009 (Old BS EN 50368) Cable Cleats... View More

Electrical company needs Laboratory needed that can certify that material shipments are checked for gamma radiation using a Ludlum model 19 Micro-R Me... View More

Electrical laboratory needed for quality testing and certification of electromagnetic and ultrasonic insect/mosquito repellant technology. View More

Electrical laboratory needed for failure investigation testing for lightning cable to specific problem (or problems) with a defective 8-pin lightning... View More

Electrical Home appliance manufacturer needs Microbiology Laboratory for antimicrobial efficacy testing of UV-light on sterilization.
1. Textiles in... View More

ELECTRICAL LABORATORY NEEDED FOR EN AND ANSI BASE PHOTOCELL TESTING (RECEPTACLE) TO ANSI C136.10: 2006 AND NTC 2470, Contact endurance test, Material ... View More

Electrical Laboratory needed for Compact Fluorescent Lights (CFL) and Tube Fluorescent Lights (TFL) Testing for Hg - Mercury weight measurements View More

Large corporation needs laboratory for LC/MS quantification of synthetic cannabinoids in urine samples specifically: AB-PINACA and its metabolites (A... View More

Electrical Laboratory needed for IES Testing of LED Light fittings to Illuminating Engineering Society
of North America (IES), LM79 Approved Metho... View More

Electronics Laboratory needed for fcc verification testing View More

Electronics Laboratory needed for light testing to pass FCC part 15 , Radiofrequency Devices and CA Prop 65 before selling those products. View More

Appliance company needs third-party laboratory for comparison studies: Comparative Counter top / Toaster Oven Testing
View More

Electrical certification laboratory needed for LED Testing for Certificate for CGT FLAT (LED Light Flat tube)
Length: 1 meter
1) Lumen Test (4PI)
... View More

Electrical laboratory needed for ASTM shock pulse testing : 100 vertical half sine 10G, 11 msec shock pulses on a 6' x 4' crate weighing 2000 lb View More

Performance laboratory needed for endurance testing for a 6 MVA transformer according to EN 50464-4, Three-phase oil-immersed distribution transformer... View More

Medical Device Microbiology laboratory needed for sterilization testing of operating room surgical light plastic handles at parameters:
? Tem... View More

Laboratory needed for National Electrical Manufacturers Association NEMA testing two LED modules to the 2005 NEMA TS 4, section 5, Display properties... View More

Analytical Chemistry Laboratory needed for OFHC Copper powder testing for the O2 percentage View More

FDA Electrical medical device laboratory needed for Skin massager testing:
2. FDA Product Code : PBX
3. Performance test standard
? IEC 60601-1: M... View More

ILAC certified laboratory needed to perform testing of instruments and systems against IEC 60601-1-2, Medical electrical equipment - Part 1-2: Gen... View More

India laboratory needed for solar photovoltaic module testing including mechanical testing, robustness test, metal oxide test, lead content test View More

Large Engineering company needs Electrical Laboratory for Harmonics test View More

ILAC Mutual Recognition Signatory Laboratory needed for Electrical ageing testing for insulation piercing connector for LV arial bundle cables as per... View More

Asia electrical laboratory needed for capacitor powder testing UFL-451 20Kg to test. .Please provide quote View More

Large oil company needs electrical laboratory for electrical compliance inspections. At our facility we use hot sticks, release hooks, and other equip... View More

Electrical labroatory needed for testing and charges of Three phase Grid Tie Inverters ranging from 1, 2, 5, 10 and 20kW View More

Telecommunications laboratory needed for lab examination and reporting of our mobile phone devices that we produce in China. 1) 3G signal quality and ... View More

Electrical laboratory needed for UL certification testing of individual grid tie inverter which is sun1000g2 lcd . Please provide quote. View More

Mechanical Laboratory needed for electrical and mechanical properties testing of 0.40 PVC Shielded cable with 8 22 AWG conductors , we need to get th... View More

India consumer products laboratory needed for development testing on herbal mosquito repellent voporizer to adjust the evaporation rates. Currently ... View More

Electrical laboratory needed for IEC testing of tape (synthetic) used in the fire resistance cables to sustain up to 800 deg celcius of temperature ... View More

Electrical laboratory needed for IEC Testing: Request quotation to conduct Full type material test ( PVC Compound compliance )
Grade PVC/A (insul... View More

Electrical certification laboratory needed for IEC certification Testing of washing machine 6.5 Kg. View More

ELectrical Product Safety Laboratory needed for European Union EU Restriction of Hazardous Substances Directive ROHS verification of electronic compo... View More

Physical Laboratory needed for thermal and optical properties testing (absorptance/emittance) for a small electronics board (50 mm x 50 mm). The purp... View More

Materials Laboratory needed for microelectronics testing for collected volatile condensable materials and Total Mass Loss View More

Electronics Safety Laboratory needed for electrical safety testing of a belt that can communicate and charge batteries and phones of any other wirel... View More

Midwest USA electronics laboratory needed for investigation testing to determine the cause of intermittent connectivity or electronic scanning equipm... View More

Electrical laboratory needed for UL certification testing of Damper Products. View More

Large engineering company needs India Physical Laboratory for Vibration testing. View More

Laboratory needed to quote for analysis of appx. 1 oz. of silicone based fluid: chemical composition (quantitative) analysis to a standard and industr... View More

Florida electrical safety laboratory needed for shielding effectiveness of EMI Sheidling Equipment View More

India electronics laboratory needed for EMI / EMC Testing: CE-03 EMI/EMC test as per MIL STD 461C 1 sample; per day basis- multiple iterations of test... View More

Large electronics manufacturer needs Accelerated Stress Test in high humidity (80%RH), high temperature (70C) for 4 months View More

Large electronics company needs United States, Japan or Europe Physical Laboratory for ASTM D2628 neoprene testing: Physical Test for Polychloroprene(... View More

Asia electrical laboratory needed for required IEC electrical safety testing on Slot machines to fulfill legal regulation? e.g EMC? View More

Electronics Laboratory needed for reliability testing of of CB certificate View More

San Francisco Bay area Electrical Laboratory needed for full Electricity meter testing to ANSI Standards: ANSI C12.1 is required for Electricity Meter... View More

Electrical Laboratory needed for IEC Testing: Audio, video and similar electronic apparatus - Safety requirements to IEC 60065 and IEC 60268-3:2013Sou... View More

New York Metro Area Product Safety Laboratory needed for IEC Testing: Temperature Rise Test for an infrared portable AC Switch to IEC 60884-1: 2002+A1... View More

Renewable Energy company needs electrical certification laboratory for all electrical certification testingincluding LM 79, HV Test
Environmental te... View More

Europe electrical product safety laboratory needed for Thermal testing:
* Wind Test
* IP Test
1-2 units View More

Interested in outsourcing 3rd party lab for electroacoustic testing services to validate Active Noise Cancelling (ANC) Headphone performance. Sample ... View More

Asia Technology Company needs Africa Electronics Laboratory for Tablet Safety testing including /EMC /RF . Please advice with a CB and CE test repor... View More

Consumer Product Safety Laboratory needed for Skin Allergy Testing on Silicon Rubber Ear Tips for Audio Products. Will expand more when contacted. View More

Europe electrical laboratory needed for UL508 Overload and Endurance test 100k cycles - General Use - 230VAC 25AAC 0.8 Power factor View More

Europe Electrical Laboratory needed for ANSI Electrical testing Require ANSI C12.20-2010 Clause:5.5.4.13 & ANSI C12.1-2008 Clause:4.7.2.13: Test No 13... View More

Europe Electronics Laboratory needed for RoHS, IEC 60950 safety test EN/55022 EN/55024 EMC test RoHS Directive 2002/95/EC ?
View More

University Researcher needs Ireland electronics laoratory for cell phone safety and toxcity testing is needed:x-ray fluorescence spectroscopy safety ... View More

USA electronics laboratory needed for battery testing of remote controlled helicopters View More

Electrical Laboratory needed for research study for studying a printed circuit board's (PCB) in-plane CTE and out-of-plane warpage induced by a steady... View More

USA electrical laboratory needed for electrical Testing of components (transformers, protection equipment, etc) against power grid (15kV) and up volta... View More

Electronics Laboratory needed for cell phone testing: Vibration testing for low level low frequency

In order to test sensors of cell phones as fo... View More

India NABL and ISO Laboratory needed for ASTM and IEC Testing of industrial connectors, we would like to test our products as per IEC 61076-2-101.
Fo... View More

California electrical laboratory needed for IEC Testing: IEC/EN 60747-5-5Optocoupler testing for Approval for Reinforced Insulation View More

NG and SEC Certified electrical Laboratory needed to test some stranded ground wire. Just dimensions, resistance, resistivity, T&E. The lab needs to b... View More

Large electronics company needs Europe Laboratory for immersion of enclosure product ( 500x230x130)mm in ISOoctane(70) / Toluene (30) View More

ISO 17025 electrical labooratory needed for IEC Electrical Proficiency Testing for IEC 60076, Power transformers ?. Part 3: Insulation levels, dielect... View More

ILAC Accredited Laboratory in Europe needed for electrical testing: Accuracy testing for a voltmeter with HV probe(1/1000) in the range of 1kV to 4kV ... View More

USA electrical laboratory needed for ANSI certification testing to test/certify our electrical connector devices as per ANSI C119 (direct burial appli... View More

Materials Laboratory needed for Fluid analysis for High Voltage Power supply Transformer fluid? Amounts follow: 1 00.55 ounces 2 11.60 ounces 3 08.85 ... View More

Electrical laboratory needed for re-designing existing power supply modules (dual power supply,. Triple power supply ,SSR) of air-born systems. We nee... View More

Optical Laboratory needed for Optical Testing: European Standards Testing to DIN 5032 Part 7 Photometry; classification of illuminance meters and lum... View More

Mexico or USA Electrical Certification Laboratory needed for Photovoltaic certification of photovoltaic panels to IEC 61853 or ASTM E1036-02 some of m... View More

Electrical equipment importer needs electrical certification lab for certification verification testing to verify the authenticity of a CB Test Certif... View More

Electronic manufacturer needs electronic laboratory for reliabiity testing and failure analysis testing. View More

Electronics Laboratory needed for Voltage Testing: Low-Voltage Ride-Through (LVRT) or Fault-Ride-Through (FRT), according to ANRE order 74 - Romania. ... View More

Materials laboratory needed for ASTM Testing. Electrical insulating fluid testing for CTE Test. isoparaffinic oil and a standard white oil. I can prov... View More

ISO 17025 laboratory needed for inter-laboratory comparison testing of circuit boards. Please confirm that 1. Is your lab ISO 17025 accredited for th... View More

Canada analytical chemistry laboratory needed for chemical Testing of the contents to ensure that there are no chemicals and is 100% natural. Two samp... View More

European Union Electrical Laboratory needed for RoHS testing and REACH Compliance testing: Could you perform analysis for substance detection as (refe... View More

ASIA electronics laboratory needed for IEC Testing: Lab Heat cycle testing of electrical Fittings to IEC 61238-1 View More

Electronics Laboratory needed for SAE Testing to SAE J575, SAE J579, SAE J1330, vibration test, moisture test, dust test, corrotion test, warpage test... View More

US Electrical Laboratory needed for ANSI Electric Meter Testing To test 1 to 3 samples, reference ANSI C12.1 Section 4.7.3.6.1 and 4.7.3.6.3 and cust... View More

Asia Electrical Lab needed for IEC TESTING: Electrical Laboratory testing Services for the 150 kV transmission insulators, such as the visual test, Dr... View More

Electrical Laboratory needed for Optical testing based on EN12966 Testing lumunance and contrast of emitted light (using LED's) within certain beam w... View More

Electronics Manufacturer needs metallurgical laboratory for stainless stell teting for Metallurgical confirmation or not, & Corrosion Puported paramag... View More

Asia electrical laboratory needed for IEEE Testing: Electrical Heat cycle Test & IEC61238-1(2003-5) & Ageing Test & Tensile stress test View More

Asia electrical laboratory needed for CE Marking, IEEE Testing to Electrical IEC61238 Product = Voltage detector TestPen
CAT IV 1000V. View More

NABL Texas electrical laboratory needed for ASTM Testingof aluminum alloy composition to ASTM B233. Must be NABL accredited View More

India Government approved Laboratory needed for electrical testing of Electrical Insulated Mat material (CONFIRMING to IS 15652:2006). View More

Middle East Electrical laboratory needed for IEC Testing of different types of Lamps Luminaries in accordance with IEC standards View More

India NABL Laboratory needed for Dye penetration testing as per IS-3658 -1999 CL7, Code of practice for liquid penetrant flaw detection
View More

Electrical Laboratory needed for IEEE electrical Testing: electric arc erosion rate in low voltage circuit breakers arc erosion rate for low voltage a... View More

Electrical laboratory needed for bending endurance testing on test cable under varying temperature conditions. Following this a voltage test on the i... View More

URGENT: Stainless steel electrical junction boxes manufacturer needs ISO/EC 17025 physical laboratory for IK10 Impact testing to ASNZS 60079 or IEC 60... View More

Chicago Electrical Laboratory needed for certification testing: Mated Electrical Connector IP69K Testing. There will be two sets of mated assemblies, ... View More

NABL / AALAC electrical laboratory needed for complete electronic testing of electronic fan regulator (capacitor type) as per IS:11037 View More

Electronic laboratory needed for BIO Certification testing of Multi Media Projectors. As per Indian Government guidelines, we need to get the product ... View More

Pacific Northwest USA physical laboratory needed for physical testing: Vibration testing, Mechanical Shock testing, Humidity testing, and Temperature ... View More

British Columbia, Canada electrical laboratory needed for ANSI Testing to ANSI 12.1 Revenue grade meters/CT energy metering module that can meter sing... View More

Electronics laboratory and analytical chemistry laboratory needed for mercury lighting fitting testing. Test for LED, sodium vapor, metalhalide, cfl, ... View More

Analytical Chemistry Laboratory needed for analytical chemistry Testing mass diffusion coefficient of metal ions in a liquid solution.
5 Samples at 4... View More

Large electronics firm needs Textile laboratory for AATCC Testing: AATCC 15 Colorfastness testing View More

India electrical laboratory needed for IEEE Testing of HDPE pin Insulators to ANSI standards View More

Electronics manufacturer needs electrical laboratory for ISO Testing: ISO contamination Testing according ISO 16232 Road vehicles -- Cleanliness of co... View More

Asia electrical laboratory needed for IEC Testing High voltage detector as per IEC 61243-1, Live working - Voltage detectors , ." View More

New Jersey Electrical Laboratory needed for antenna testing for Measurement of antenna characteristics View More

Large electronics manufacturer needs physical laboratory for radar testing. Radar that I need to remain stationary while two objects move at varying a... View More

India electrical laboratory needed for IEC Testing of Solar Inverter to IEC 60068-2 214.30 View More

NY electrical laboratory needed for electronics testing of recycled electronic products. 100% of the metals and nonmetals with our patented technolog... View More

Large electronics manufacturer needs Electrical Laboratory needed for voltage testing to Track and time to Track testing? We normally do samples in g... View More

Large Electronics Manufacturer needs qualified electrical laboratory to Perform DMA or DSC on resin sample to obtain Tg per requireemnt(provided)." View More

Florida physical laboratory needed for transportation vibration tests on radio assembly as per Mil Std 810 Method 514.6 General Vibration procedures 1... View More

Electrical laboratory needed for prototyping: prototype materials for OLEDs synthesized." View More

Africa electrical laboratory needed for maximum power transfer testing: wattmeters, voltmeter, ameter, power supply, resistance,cables View More

India Electrical Laboratory needed for International Electrotechnical Commission (IEC testing electronics testing to IEC 60228, conductors of insulate... View More

Certification Laboratory needed for ANSI certification compliance testing certify compliance with ANSI C12.18 American National Standard Protocol Spec... View More

Asia lightning certification laboratory needed for certification testing for early streamer emission(lightning protection system) View More

INDIA ELECTRICAL LABORATORY NEEDED FOR ELECTRICAL TESTING OF IP CAMERA TESTING INCLUDING FOCAL LENGTH, ACTIVE PIXELS , IR CORRECTION ETC. View More

Thailand electrical laboratory needed for IEC testing, CABLE TRAY SYSTEMS. AND CABLE LADDER SYSTEMS View More

Asia Acoustics Laboratory needed for acoustics testing: Peak Sound Pressure Level Compliance, Acoustic Shock and Maximum Sound Pressure Level complian... View More

USA electical laboratory needed for IEEE Testin to IEEE 1202 Cable Tray Flame Testing View More

US electronics laboratory needed for IEEE Testing: IEEE Electrical Surge testing: IEEE C62.41.2 Location Category A View More

Electrical laboratory needed for IEC Testing: Inclined Plane, Tracking and Erosian tests to International Standard IEC 287, Electric cables - Calculat... View More

FDA GMP electronics laoratory needed for ANSI AAMI Testing to ANSI AAMI EC12 View More

Electronics Laboratory needed for ANSI Testing. 5 samples tested to:
ANSI C12.1-2008 part 4.7.3.6.1. Electric Meters Code for Electricity Metering a... View More

Plastics Laboratory needed for ASTM Plastic Testing of injection plastic components of PBT Valox, particulary.
Fusion point, Fuid point, specific we... View More

USA Electrical Certification Laboratory needed for IEC Testing: X-Ray Film Digitizer Equipment IEC 60601-1 3rd Edition and a test report and CB certi... View More

Asia electrical laboratory needed for IEC testing. View More

India Electrical Laboratory needed for RFI and EMI LED Tube Light testing and certification of Led Tube light I.e.T8 led tube light. 2 numbers. 1) Min... View More

India Electrical Laboratory needed for electrical Testing of Electrical measuring instrument View More

Europe Electrical Laboratory needed for IEC Voltage Testing to IEC 60243 for dielectric properties of the insulating coating applied on a substrate of... View More

India electrical laboratory needed for IEC electrical testing: high current and high voltage View More

China CNAS accreditated test laboratory needed for IEC Testing. Mechanical failing Load Testing on 36KV Pin Porcelain Insulator for 10KN View More

Electrical Laboratory needed for IEC electrical testing as per IEC 60076: C2 E2 F1 TESTING OF DRY TYPE CAST RESIN TRANSFORMER AS PER IEC 60076 View More

Large manufacturer needs California Physical Laboratory for ASTM Testing ASTM D 1044/1003. Abrasion Testing to Our company will be starting a new proj... View More

Large electronics firm needs electrical laboratory for electrical product safety testing 1.Need you support to Know Which are the Labs do have facilit... View More

India electrical laboratory needed for electrical product safety testing 1. LCD /LED product safety testing as per IS616: 2010.
2. Time period for te... View More

South Korea Materials Laboratory needed for ASTM Testing and ISO Testing, Corrosion analysis testing is needed to verify resistance of external facing... View More

ELECTRICAL LABORATORY NEEDED FOR ASTM TESTING, DIELECTRIC CONSTANT AND DISSIPATION FACTOR FROM 2 UP TO 14 GIGA HERTZ TO ASTM D 150, Standard Test Meth... View More

Turkey electrical laboratory needed for IEC Testing : type tests according to iec 60071-202 for prefabricated compact substation View More

USA Electrical and Mechanical Laboratory needed for ANSI Testing: Pefrom the Complete set of testing describe in ANSI 119.4 for Al-AL conductors with ... View More

INDIA PHYSICAL LABORATORY NEEDED FOR ANSI AND UL TESTING TO ANSI/ UL 1709 RAPID RAISE FIRE TEST FIRE PROOF ENCLOSURE FOR HYDRAULIC,ELECTRIC,PNEUMATI... View More

India Electrical Laboratory needed for EMI & EMC TESTING

1
Rectilinear Potentiometer
Penny & Giles
SLS-095-075-3K-P-66
1

2
Single T... View More

USA Electrical Laboratory needed for UL Testing: 1 sample for UL 181 Erosion resistance. request from client (item 2 only):
1. We have an electrical... View More

UK physical laboratory needed for optical testing.. Compare light transmittance between two touch sensor variants.

Construction 1:
4mm plain glas... View More

UK Electrical Laboratory needed for UL Short Circuit Testing 100,000 amp short circuit UL Follow-Up test program View More

India physical acoustics laboratory needed for tdma noise testing View More

Malaysia, Penang or Singapore electrical laboratory needed to conduct current saturation test and Irms test for an inductor" View More

Metrology Laboratory needed for Calibration of air nozzle to about 45 kg/s.
Nozzle throat is ~760 mm View More

USA, East Coast, California, Chicago, Phoenix, or Houston Electrical and environmental Laboratory needed for ANSI testing of smart meters per ANSI C12... View More

Aia Electrical Laboratory needed for electrical and Physical testing of Cat5e FTP cable:
Item testing, Rating testing, Conductor Resistance Testing, ... View More

USA ELECTRICAL PRODUCT SAFETY LABORATORY NEEDED FOR IEC TESTING: WIRE TESTING FOR HALOGEN CONTENT TO IEC 60754-1, test on gases evolved during combust... View More

Electrical Laboratory needed for IEC Testing to IEC 60754-1, Test on gases evolved during combustion of materials from cables - Part 1: Determination ... View More

Electrical Laboratory needed for International Electrotechnical Commission IEC Testing to IEC61643-321 Components for low-voltage surge protective dev... View More

Europe Electrical Laboratory needed for IEC Testing: short circuit test cable clamp K36/52 according to IEC 61914, Cable cleats for electrical install... View More

Lighting company needs electrical laboratory for IEEE electrical testing to IEEE 1313.1 standard, Standard for Insulation Coordination - Definitions, ... View More

Electrical Laboratory needed for International Electrotechnical Commission IEC Testing of electrical adhesive tape to IEC Specification, IEC 60454-3-1... View More

USA or Canada Electronics Laboratory needed for IPX-6 Testing to IEC Std. 60529 Section 14.2.6Moisture Intrusion testing on electric toothbrush size a... View More

West Coast UL Electronic Certification Laboratory needed for UL Certificaiton testing to Certify an inverter to U.L. 1741,Inverters, Converters, Contr... View More

Europe Electrical Laboratory needed for IEC Testing, Mechanical and Electrical Testing of cable cleats for IEC 61914, Cable cleats for electrical inst... View More

Electrical Laboratory needed for IEC Testing: IEC 61230, Portable equipment for earthing or earthing and short-circuiting View More

India Electrical Laboratory needed for Electrical Resistance Testing in accordance with MIL-DTL-5541 Cl-3, Military Specification, Chemical Conversion... View More

Mexico certification laboratory needed for electrical reliability Testing for equipment:

Brand: Monster Power
Model: HDP 1800
Description: High d... View More

Large Electronics Manufacturer needs Radiochemistry Laboratory for Radiation Detection test of our Japan goods before ship them to Iraq to comply Iraq... View More

Electrical Laboratory needed for Electrical Testing of Electrical Insulator Sheet,which is used like a carpet in front of Substation, High Voltage Gen... View More

Large Electronics company needed India materials laboratory for Photobiological safety testing of LED LIght Test Ultraviolet hazardUV Hazardaretinal t... View More

Electrical Laboratory needed for Electrical Testing, Transformer Testing to IEC Standard IEC60044-1 Instrument transformers View More

Large Electronics Mfg needs West Coast USA electrical laboratory for qualification testing of electrical brushless motor connector contacts to separat... View More

ELECTRONICS CERTIFICATION LABORATORY NEEDED: CE LABORATORY FOR ELECTRICAL CERTIFICATION OF OUR POWER SUPPLY(SAFETY & EMI/EMC) WE ARE MANUFACTURER OF E... View More

Brazilian Trading Company needs electrical laboratory for quality control testing to have quality control inspection on the production in China and qu... View More

USA electrical labroatory needed for polymer/ceramic testing: Dielectric constant and dielectric strength of polymer/ceramic nanocomposite View More

Europe Physical Laboratory needed for Dust Chamber Testing to check the entry and departure system of a door in a train for this reason the dust chamb... View More

Mechanical laboratory needed for abrasion testing by using ABREX equipment. Test item : IEC60068-2-70 Test component : Knob of Automotive interior pa... View More

British Columbia Packaging Laboratory needed for ASTM Testing to ASTM 4169 09 Standard Practice for Performance Testing of Shipping Containers and Sy... View More

Electrical Laboratory urgently needed for IEC Testing to IEC 550C and IEC 750C Glow wire testing done plus 175PTI testing done by lab that is approved... View More

Electrical Laboratory needed for NFC and IEC Testing of aerial cables to NFC-33-209 & IEC 60228: TYPE TESTING & UV TESTING OF AERIAL BUNCHED CABLES 1... View More

Large Electronics Manufacturer needs USA Electrical Laboratory needed for IEC Testing to IEC 60335-1 Clause 30 glow wire testing which references IEC ... View More

Electronics laboratory needed for dielectric spectroscopy experiments in testing aqueous solutions. View More

USA electronics laboratory needed for electro magnetic frequency testing View More

Sri Lanka or India Microbiology Laboratory needed for ASTM Testing biodegradability testing of plastic materials relative to ASTM D5988 a standard in ... View More

South Korea ISO Analytical Chemistry Laboratory needed for WVTR and OTR Testing for AL2O3 Coated flexible substrates done by atomic layer deposition ... View More

Electrical Laboratory needed for ANSI Testing to ANSI C 136.10 locking-type photocontrol, used to control street luminaires, to standard ANSI C 136.10... View More

Mumbai electrical laboratory needed for LED Testig to test light output intensity of LEDs View More

Large Corporation needs India Mechanical Laboratory for Site testing: Mechanical endurance test on High voltage circuit breaker as per IEC 62271-100 View More

Electronics Laboratory needed for fuse testing. The fuse is rated at 15 amps 250 VAC. We can supply the currently approved vendors parts and the new s... View More

Electrical physical laboratory needed for insulation testing - water absorption- on insulation of LT Aerial Bunch Cables please and whether tube extru... View More

Electrical Laboratory needed for ASTM Testing: ASTM D-877 electrical breakdown
astm D-924 Power Factor 25C&100C
ASTM D-92 Flashpoint
ASTM D-971 In... View More

Physical Laboratory needed for vibration testing to MIL-STD, Mil-STD-202G, Method 214AThe specimens are flexible electronic PWBS and the largest one m... View More

Electrical Laboratory needed for IEEE Testing: Electrical temp-rise testing. Perform temp-rise test on a bushing rated at 21,500 amps per IEEE standar... View More

India Mechanical Laboratory needed for DIN Testing Test Details: Specification - Equivalent to DIN 50018 The test duration of Saturated SO2 test is 3-... View More

Texas Electrical Laboratory needed for UL Testing: ul61010-1 Standard: Safety Requirements for Electrical Equipment for Measurement, Control, and Labo... View More

India Global Certified Laboratory needed for Electronics product Testing - Automotive" View More

USA A2LA electrical labroatory needed for ASTM Testing to ASTM D924-08, Determination of dielectric constant of thick (~20 mil), flexible films View More

India Electrical Laboratory needed for Acceptance Testing to IS Specification ForLT(1.1 KV) ,2.5 sqmm 2 Core PVC Insulated Aluminium Electric Service... View More

India electrical Laboratory needed for impulse testing on volatge transformer View More

Electrical laboratory needed for IEC Testing to IEC 61643-11 for our product LV Surge Arrester rate 480V. We will be much more appreciated if you can ... View More

Electrical Laboratory needed for Electrical Acceptance Testing for 1.1KV 2.5sqmm,2ccore,PVC insulated,Aluminium Electrical service Connection Cable (o... View More

Germany electronics manufacturer needed electrical laboratory for CE Testing of DC power supply testing with input of 90-240VAC and 48V, 30A DC." View More

Electrical Certification Laboratory needed for electrical certification testing (1) Conduct IEC 60695-11-10 Flammability test at 3.0mm thick for HB40 ... View More

USA Medical Electronics Laboratory needed for ECG Electrode Testing to AAMI standards: AAMI ECG Electrode testing EC12 View More

Large electronics mfg needed electrical laboratory for IEC electrical testing: Dielectric and short-circuit current tests for disconnector switchs of ... View More

Plastics and Polymers Laboratory needed for ASTM Testing to measure melt flow rate for epoxy according to ASTM 1238-10 or ISO1133. View More

India Electrical Certification Laboratory needed for Certification Testing of: Monitor LG 22" Monitor M227WA
1. Horizontal Resolution (500 TV Lines) ... View More

California Electrical Laboratory needed for ASTM Testing ASTM B539 - Electrical Test - one sample of customer part - coated with chemical film (alodin... View More

Large multi-national company needs Asia electrical certificaiton laboratory for EMI/EMC Certification testing as per DO-160F/G View More

UAE, ASIA ENERGY LABORATORY NEEDED FOR IEC TESTING LUMINARY TEST : IEC60598 with several parts View More

EASTERN USA ELECTRONICS LABORATORY NEEDED FOR ELECTRICAL SAFETY TESTING for LVD using IEC 61010-1:
>> Ground bond test
>> Insulation resistance tes... View More

US Optical Laboratory needed for ASTM Optical Testing: (Transmission, Reflectance,Haze) 5 samples View More

Eastern USA Mechanical Laboratory needed for Mechanical Testing on a Clamp Mil Spec testing on a clamp assembly. 4.5.1 Hydrostatic Pressure4.5.2 Stat... View More

Electrical Laboratory needed for electrical testing to: PM8374A-NI 712 PCS PM8354A-NI 200 PCS

View More

Eastern USA metallurgical laboratory needed for analyzing a rust condition on fuse holders (on a PC Board) as to the following:

1)Root cause of the... View More

Non-destructive Laboratory needed for non-destructive testing: X-ray inspection of zinc die cast parts to detect internal cracks or flaws: parts quant... View More

Mumbai Electrical laboratory needed for LED electric performance testing
View More

UK electrical laboratory needed for electronics mcb,rcbo and etc.. we import them from china
View More

Electrical laboratory needed for IEC Testing, Type tests per IEC 61439-1 of 380 V Switchgear will be tested for type tests and certified View More

Large computer company needs Massachusetts Metallurgical Laboratory for metal content analysis to analyze platinum content from a sample of finely cru... View More

India Electrical Laboratory needed for IEX Testing of Press Boards (made as per IEC 60641-3-1), for use in Electrical Transformers of 400KV and above.... View More

Electrical laboratory needed for EMC Testing, ENEC for LED convertor. Can we know price and actual sample needed.
View More

India physical laboratory needed for NFPA Certification Testing to NFPA 496 certification test for our Z purgeing system View More

Electrical laboratory needed for electrical testing on p/n ME501606
View More

West Coast Analytical Chemistry Laboratory needed for ICP-MS testing or possibly AA testing of Semicnoductor proccesing acid bath containing the follo... View More

Large office equipment manufacturer needs electronics laboratory for Conductivity measurements of powders measure the conductivity of 3 laser beam pri... View More

Large electronics manufacturer needs Canada or USA Electrical Laboratory for electrical (12,000 amp, 4 cycls, 240Volt source) testing. Fixturing woul... View More

Large multinational electronics manufacturer needs electrical laboratory for NEMA 3R water type testing, preferably in or near Greater Toronto Area, ... View More

EUROPE Physical, Electrical laboratory needed for ASTM Testing: Elastic pelma:

1. Resistance towards friction. ASTM-D-1630-83

-Before ageing.
... View More

Southern California Electronics, Automotive Laboratory needed for testing electronic device that claims to increase MPG and reduce emissions. View More

Middle East Electrical Laboratory needed for NETA testing View More

India Electrical Certification Laboratory needed for IEC Certification Testing to IEC 61215 - 2ND EDITION (2005) & IEC 61730 -1 :2007


Type of Cer... View More

USA electrical laboratory needed for electromechanical QPL qualification testing Short Circuit Test per MIL-PRF-22885 Section 3.29 , subsection 4.7.24... View More

Ergonomics Chair Mfg needs electronics certification laboratory for electrical certifications: PSE certification for the Japanese market but we're co... View More

Large, multinational company needs Canada analytical chemistry laboratory for water testing. For the jar testing our goal was manganese oxidation. We ... View More

Ontario ISO Electrical Laboratory needed to measure Electrical Characterisics for a 50 OHM Iff Feed System -Antenna Arrays View More

Electrical Laboratory needed for EN 50178 Testing of Partial static discharge, high voltage isolation, and dV/dt testing to EN 50178 specifications. T... View More

Bihar electrical labroatory needed for calbration testing of Meggar Meter- Waco Make View More

Electrical laboratory needed for DC characterization services on test pin that use as a medium to transfer signal between IC chip and test board use i... View More

Electrical Laboratory needed for TCP/IP Stack Compliance Testing for the following IPv4 protocols: DHCP, Telnet, UDP, TCP & ARP. View More

Electrical Laboratory needed for ANSI Testing Dielectric testing, Humidity testing and Electrical testing for a 765kV insulated aerial lift. (Withstan... View More

Europe Electrical Laboratory needed for Electrical Connector Testing of connectors and wiring related to electronic boards in home appliance and autom... View More

West Coast Electrical Laboratory needed for EIA Evaluation: Evaluate edge card connector contacts and mating edge card fingers for gold porosity to ba... View More

Electrical laboratory needed for voltage testing of Lead Acid Battery 12volt& 2volts View More

Asia Electrical Laboratory needed for IEC Testing: Motor Circuit breakers IEC 60947, IEC 60947-1
2) Contactors IEC 60947-4, IEC 60947-5
3) Relays I... View More

India Electrical Laboratory needed for IEC 60439 Busway Temp. Rise Test for Plug in Box. View More

USA West Coast Electronics Laboratory needed for circuit board testing and burn-in at temperature extremes -20C to +50C. ... View More

US Laboratory needed for measurement of total hemispherical emittance of a thin film substrate.
(non destructive) View More

Electrical Certification Laboratory needed for EMC Testing RF short rage imtrusion detector to INDIA standards View More

USA Electronics Laboratory needed for static breakdown voltage, insulation resistance between terminals, visual & mechanical, parametric defects, and ... View More

JAPAN ELECTRICAL LABORATORY NEEDED FOR PRETESTING OF SOLAR PANELS MFG IN JAPAN. ULTIMATE END USER LOCATED IN ITALY. View More

ASTM Electrical Laboratory needed for testing to determine volume resistivity on a sample of epoxidized soybean oil as per ASTM D-1169. View More

India IEC Electrical Laboratory needed for IEC testing conformal coated board by UV40 chemical as per IEC 60664-3 standard View More

Vancouver, Canada VCCI Electrical Laboratory needed for EMC testing as per Japanese EMC requirements. View More

Electrical Laboratory needed for type tests of insulation piercing connectors according to NFC 33 020. View More

India Electrical Laboratory needed for testing of IEC socket products as per UL & IEC standards View More

Electrical Laboratory needed for electronic reliability characterization testing - Electron Beam Moire or other methods to chronicle fine movement of ... View More

Acoustics Laboratory needed for product vibration testing for 2 hours at 17 Hz with an amplitude 1.5 mm in each 3 axes. Product is a small (80mmx60mm... View More

USA/Taiwan SAE Mechanical Laboratory needed for SAE J 2202, J1113, and J1455 testing and certification - We will send in wire and product samples. View More

Albania Electrical Laboratory needed for Medium Voltage Cable Connector and Terminals Test to obtain Sign and Sealed sheets. View More

UL Electrical Laboratory needed to test espresso machine (small appliance for home and office use) to certify electrical safety for UL listing of prod... View More

USA Electrical Laboratory needed for product safety testing to see if product conducts electricity. Looking for a KVA rating on this device. View More

India IEC/EN Electronics Laboratory needed for Safety testing on Yag laser View More

Europe IEEE Electrical Laboratory needed for testing Surge Suppressors as per IEEE Standards. View More

Mechanical Laboratory needed for Mechanical properties testing - Mechanical resistance, young/Elastic modules,Tensile strength, Compressive strength a... View More

Electrical Laboratory needed for electrical quality control testing in accordance to ISC, CE, ISI, SNI, ICC, PSB, BSMI, TIS,ETL View More

Analytical Chemistry Laboratory needed for Electron Microscopy test for PCB. View More

Electrical Laboratory needed for electrical environment testing of an industrial control device tested to demonstrate robust operation in a noisy elec... View More

Asia and USA Electrical Laboratory needed for UL1 Zinc Coating Testing View More

Europe certification laboratory needed for EN conformity testing to EN 50483 of aerial bundled cable accessories for conformity to requirements of sta... View More

USA Electrical Laboratory needed for testing to review and do a comparison of 2 different circuit boards that are used in 2 of our similar electric pr... View More

Midwest USA Electrical laboratory needed for DIN Testing: Water spray testing electrical switches to IP69K Per DIN 40050-9 View More

EU ELECTRICAL LABORATORY NEEDED FOR IEC SURGE SUPPRESSOR TESTING AS PER IEC 61643 View More

Arizona Electrical Laboratory needed for particle size distribution testing by laser light scattering method. View More

EPA Toxicology Laboratory needed for testing a suspension of a nanoscale metal coating solution for reporting on an MSDS for acute and chronic exposur... View More

Toronto IPC Instrumentation Laboratory needed for Ion Chromatography & Scanning Electron Microscope measurement in accordance to IPC-TM-650 View More

Eastern USA Electrical Laboratory needed to test 60W drivers for use with LED lights View More

Electrical Laboratory needed for IEEE testing High Voltage Surge Arresters to IEEE Std. 62.11 View More

Southeastern USA ISO Electrical Laboratory needed for Dimensional Testing of small electronics parts in accordance to ISO TS 16949 - 5 parts 100% dime... View More

India Electrical Laboratory needed for IEC testing: tracking and erosion testing on silicone composite insulators according to IEC:61109 for 1000hrs. ... View More

China ISO Electronics Laboratory needed for ANSI AAMI shelf life testing for ECG Electrodes in accordance to ANSI/AAMI EC12:2000 samples size is 30pcs... View More

Dubai Electrical Laboratory needed IEC Certification Testing of transformer at manufacturer factory. View More

Electrical Laboratory needed for Certification Testing for Partial Static Discharge on a small Torroid Transformer in the range of 3KV View More

USA Electrical/Mechanical Laboratory needed for testing 4kW On-Board DC-DC converter for Shock & Vibration, Temperature Cycle, Thermal Shock, Fungal G... View More

USA/Canada/South America Electrical Laboratory needed for UL Testing, Arcing testing over flexible conduit fittings as per UL 1203 Section 92. The obj... View More

India/China ASTM Electrical Laboratory needed for ASTM Testing, inclined tracking & erosion testing as per ASTM D 2303. View More

Electrical Laboratory needed for testing IEC 60250 for dielectric constant and disspation factor at 1Ghz and 2GHz? Please advise what specimen(s) do y... View More

Electrical Laboratory needed for testing Numerical Protective Relay including routine test(visual inspection,mechanical operation test,accuracy and me... View More

RoHS Laboratory needed for compliance testing. View More

Electrical Laboratory needed for IEC Testing copper cable compression lugs as per IEC 61238-I, Class A. View More

India OECD/ASTM Microbiology Laboratory needed for testing Mineral oil for bio-degradability as per OECD 310B/ASTM. View More

Electrical Laboratory needed for IP-41 eletronics testing electronic console for IP - 41 Protection class View More

Taiwan or China Optical Laboratory needed for LCD Testing, luminance measurements of LCD panels using a spectroradiometer (basic luminance meter is no... View More

Europe Electrical Laboratory needed for electrical impedance characterization ~(0.1 Hz - 10 GHz) View More

ECSS or ASTM Laboratory needed to test samples/ materials for %TML and %CVCM by outgassing analysis according to ECSS- Q-ST-70-02 standard. View More

ASTM Packaging/Mechanical Laboratory needed for the following testing:
SEQUENCE: 1 ELEMENT: A Manual Handling Distribution Simulation Hazards incurre... View More

HK Asia FDA/ISO Packaging Laboratory needed for testing the resistibility of our products packages during Air, Sea and ground transportation
Number o... View More

Slovenia or Hungary Physical Laboratory needed for Temperature Cycling Testing:
3 cycles in the temperature range of 0 to +70 deg.C. The cycle time... View More

Bangalore, India Electrical Laboratory needed to test new RJ45 connector for CAT7 cable. View More

India (UP) NABL Mechanical Laboratory needed for Vibration and Shock Test, Dump Heat Test, Dry Heat Test, EMC/EMI, IP 23, etc. Functional Test after e... View More

Eastern USA Electrical Laboratory needed to test our 480V, 60 Hz, 100 kW Active Rectifier for its response to voltage dips and frequency shifts while ... View More

Belgium-France SAR Testing Laboratory needed to test anti radiation mobile stickers. View More

Electrical laboratory needed for ASTM testing: Dielectric Constant, Dissipation @ 1GHz and 10GHz,Dielectric Strength, Vol/Surface Resistivity. View More

Electrical Laboratory needed to do harmonic testing (THD)of VFD (variable frequency drives)of various rating. View More

Electrical Laboratory needed to conduct load test on the following electrical motors details are given below :- 1. Power: 100KW/100KW/35KW. 2. Power: ... View More

USA Analytical Chemistry Laboratory needed for vapor pressure analysis of liquid inks. View More

USA Electrical Laboratory needed for testing in accordance to CCC.
1.Marking and instructions
2.Electric construction
3.Earth leakage current
4.E... View More

Canada HDMI Testing Laboratory needed for HDMI 1.3 Compliance Testing. View More

Electrical Laboratory needed to do an ESD test in accordance to the ANSI C63.16 (1993) standard, Contact Discharge levels with extended level of 16KV ... View More

Telecommunication Testing Laboratory needed for testing wireless, bluetooth, WiFi View More

Acoustics Laboratory need to measure the acoustic gain on HAC Enable for mobile phone for elderly in accordance to FCC Section 68. View More

Ontario Materials Laboratory needed for ASTM Packaging testing to ASTM D642 & D999 of modules shipped in plastic tote boxes, and need to determine if ... View More

Toronto Materials Laboratory needed for ASTM Packaging testing to ASTM D642 & D999 of modules shipped in plastic tote boxes, and need to determine if ... View More