Industrial Materials Laboratory Testing Requests

Need Comparative Tracking Index (CTI) Testing of a polyethylene terephthalate (PET)-based adhesive tape. Please share the cost, timeframe, sample requirements, etc.

We have a new requirement for spark-proof evaluation of inverters,
driven by the introduction of the next-generation refrigerant R290.

We intend to conduct engineering tes...

We need to test the release mechanism on a boat anchor we produce, which will be used in salt water.  Also, we would like to know what steel materials we should use.

MULTIPLE SAMPLES

I need a USA laboratory to test for Bisphenol S in thermal paper samples with an adhesive backing - expecting a short turnaround time.

Looking to identify substances inside a mechanical steel tube used in an automotive steering linkage system using a mass spectrometer. Have several samples ready to test. Plea...

We would like to conduct ASHRAE 97 test (latest version; Sealed Glass Tube Method to Test the Chemical Stability of Materials for Use within Refrigerant Systems) and miscibili...

MULTIPLE TESTING

We're looking for fire blanket testing with up to 9000 lithium batteries per DIN 91489 (Requirements for fire limitation blankets for use with electr...

We require refrigerant quality testing in chillers HVAC installed in one of our locations in Israel - we have noticed the refrigerant degrade over time. The lab partner should...

MULTIPLE SAMPLES

BUDGET APPROVED ($2,000-$5,000)

Looking for a testing facility in Canada / North America to perform a Komatsu hot tube test (KHT) for an e...

MULTIPLE TESTING

BUDGET APPROVED ($1,000-$2,000$)

Require laboratory testing in the USA to determine the bromine index in an inorganic absorbent, following ASTM...

A leading global filtration expert needs Clean Air Delivery Rate (CADR) testing for air filters. We are currently developing new air filtration solutions and are looking fo...

MULTIPLE TESTING
An Indonesian technical textile manufacturer is looking for an independent laboratory specializing in automotive testing for polyurethane (PU) artificia...

BUDGET APPROVED ($100,000 USD)
MULTIPLE PRODUCTS
MULTIPLE TESTING
Contract Laboratory needed for testing metal products for compliance to the following standards:
- Fatigu...

Looking for an Italy laboratory to test our product under UNI 10687 for asbestos encapsulation.

UNI 10687: Mechanical vibration — Description and determination of sea...

MULTIPLE SAMPLES

BUDGET APPROVED ($1,000-$2,000)

Surface energy measurements needed from solid surfaces using ASTM D7490 standard for about 10 materials. Please...

BUDGET APPROVED ($1,000-$2,000)

Need magnetic permeability testing in the USA per ASTM A342M (Standard Test Methods for Permeability of Weakly Magnetic Materials) met...

Physical and Chemical Properties testing needed for a research project: Tilapia (Oreochromis niloticus) Scales in Strengthening the Quality of Fiberglass. We aim to tes...

MULTIPLE SAMPLES

LONG TERM

We need European standard EN 6072 testing for aerospace Metallic Materials: Constant amplitude fatigue testing for Shot Peening proce...

Need to determine the maximum film temperature at which thermal degradation (cracking) begins in Triethylene glycol (TEG). 

Contract laboratory needed for SAE ARP1536A abrasion test for chafe guard. Can you help with this standard testing?

Thank you in advance and have a nice day.

Contract laboratory needed for permeability testing of refractory insulation material made from a blend of alumina and silica. The relevant standard is ASTM-C577 (Standard Tes...

MULTIPLE SAMPLES

Industrial chemicals manufacturer needs Chemical Oxygen Demand COD testing on two cleaning products. US EPA Method 1320 has been suggested but altern...

Chemicals laboratory needed for boiling point analysis on hexane (two samples).

A US-based lab is needed for testing of a material that looks like sand that was found in some equipment, we don't know what the material is but we have some material to compa...

Contract laboratory needed for wind speed testing protective fabric connected to a chain link fence.

URGENT

MALAYSIA Raw materials biochemistry laboratory needed for chick edema factor testing for fatty acids (oleochemical product) as per the US FDA 21 CFR 172.860 me...

URGENT

ON Contract laboratory needed for failure analysis on stamped metal part with a split.

URGENT

MULTIPLE TESTING

INDIA / GUJARAT Physical chemistry laboratory needed for testing soda ash slurry for the following:

- Solid Specific Gravity

Contract laboratory needed for MSDS type reporting parameters to fulfill an indirect suppliers' requirements to supply material to a plant.

Please reach out to book ...

Electrical Laboratory needed for ASTM testing of polyester fiberglass material for dielectric breakdown per ASTM D3426 (Standard Test Method for Dielectric Breakdown V...

MULTIPLE PRODUCTS

BUDGET APPROVED ($2,000-$5,000)

BRAZIL / EUA Mechanical Laboratory needed for SAE coupling integrity testing of AC hose crimping parts per SAE...

URGENT

MULTIPLE PRODUCTS

USA Aeronautical analytical laboratory needed for ASTM testing of cleanroom wipers for hydrocarbons and oils. We specifically need ASTM...

SUDAN / AFRICA Contract laboratory needed as raw material testing partner. 

URGENT

CALIFORNIA Environmental laboratory needed for discharge water testing from industrial cutting equipment.

Lab preferred around Stanislaus County.

URGENT

LONG-TERM

MALTA / EU Materials laboratory needed for glass cullet chemical composition analysis before End-of-Waste EOW criteria procedure.

URGENT

EU Accredited industrial materials laboratory needed for polycarbonate sheet testing per Military SAE AMSP83310 standard (Plastic Sheet, Polycarbonate, Transpa...

Materials laboratory needed for ASTM testing for Solar Reflectance Index SRI per standard ASTM E1980 (Standard Practice for Calculating Solar Reflectance Index of Horizontal a...

UK glass testing laboratory needed to test a glass window designed for vessels on windfarms and issue a certificate.

Construction Materials Laboratory needed to determine the heavy metal (such as Mercury and Arsenic) limit in thermal insulation per regulations in different regions.
Thank yo...

Contract laboratory needed to conduct ANSI/ASME PVHO-1 (Safety Standard for Pressure Vessels for Human Occupancy) testing for hyperbaric chambers.
We require a document for ...

Material testing laboratory (UAE preferred) needed for solar reflectance index (SRI) testing of paving materials and stone cladding.

MULTIPLE TESTING
Third-party facility (India-based preferred) needed to perform heat transfer performance and pressure drop test on a fuel-cooled oil cooler used in heat exch...

CANADA LABORATORY
Contract Laboratory needed for bulk and respirable crystalline silica testing done. Can you please provide a quote, TAT and sample size required for the tes...

EUROPE third-party laboratory needed for assessing Volatile Organic Compounds (VOC) permeability through a membrane used in heat exchangers.

URGENT
USA/NEW JERSEY Third-party analytical testing laboratory needed for testing several masterbatches (MB) for amide content.
Could you please confirm if you are able to ...

INDIA Third-party contract laboratory needed to perform noise reduction coefficient test on acoustic panels made of fiberboards.

URGENT
MULTIPLE TESTING
Material testing laboratory needed for testing HDPE (High-Density Poly Ethylene) woven coated fabric for:
- CAN/ULC-S102 (Surface Burning Testing)
...

MULTIPLE SAMPLES & TESTING
Contract laboratory needed for testing the following products per the ASME QME-1:2017 standard (Qualification of Active Mechanical Equipment Used i...