Laboratory Outsourcing and Scientific Sourcing Center

Contract Laboratory needed for testing TAS 202 Casement Projected Window for FPA.

Canada Contract laboratory needed for NFPA testing two pieces of hospital privacy curtains mesh and calculate their openness per the (NFPA)13 guidelines.
National Fire Prote...

MULTIPLE TESTING
Window Company needs Construction Materials Laboratory for certification testing of insulated glass window units.

MULTIPLE TESTING
Construction Laboratory needed for mock-up and testing of installed 2 steel posts structurally fixed to the concrete base as a barrier to an external window...

CANADA/USA LABORATORY
MULTIPLE PRODUCTS
MULTIPLE TESTING
Materials Laboratory needed for roll of AVM 580-PL waterproofing membrane testing to meet ASTM D5147 standards.

MULTIPLE TESTING
Canada, USA or China Physical Laboratory needed for abrasion resistance and cut resistance testing of polyester tie down webbing to ASTM D6770.

The cut re...

Asia Contract Laboratory needed for NEMA 3 and IP54 testing for our container product with information below
Product name: 40Ft container (Energy Storage System)
Dimension:...

MIDDLE EAST LABORATORY
MULTIPLE TESTING
Middle East Laboratory needed for waterproofing test, IP65 Compliance on PVC LID Box.

CANADA LABORATORY
Canada Contract Laboratory needed for oil & gas containment system in the thermal injection production area on product that utilizes a bonded urethane mold...

BUDGET APPROVED ($25K - 50K)
Electrical Laboratory needed for enclosure testing to UL 2043 Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products an...

Electrical Laboratory needed for current surge test as per below condition This test is intended to demonstrate that externally grounded closures can safely conduct an ...

Large Corporation needs Contract Laboratory to evaluate a plastic housing which developed cracks in the screw bosses during assembly. Specifically we want to know if the plas...

MULTIPLE TESTS
Electrical Laboratory needed for IEC and ISO testing of IP69 and IP69K on 2 stainless steel enclosures to IEC 60529 and ISO 20653.

Internationally Accredited Ballistic Laboratory needed for UL standards compliance testing of Bullet Proof building materials (window, door, curtain wall, etc.) to UL-752 Prot...

Contract testing laboratory needed for a 120min fire rating test on a steel fire rolling shutter. We need it on arms standards or BS standards. Kindly advise us some informat...

Construction Materials Laboratory needed for ASHRAE Acoustical Testing for a Recessed Ceiling Lumininaire with Air Supply diffusers on both sides to "ASHRAE 70 - Standard Meth...

Third-Party Laboratory needed for Plastic Louvers testing for UL category FTTA (Environmental-rated Accessories for Enclosures) approval to satisfy the UL508A panel builders. ...

Physical Laboratory needed for joint testing for a car canopy space frame that is made using new joining method. Testing to be similiar to the type of tests a new welding prac...

Consumer Safety Laboratory needed for safety cap testing of tree post T post / Rebar

Laboratory needed for IEC environmental simulation testing of electrical enclosures including corrosion tests in artificial atmospheres and salt spray tests as per IEC 61084-1...

Materials laboratory needed for ASTM thermal conductivity testing of plastic roofing product to ASTM C518 (Standard Test Method for Steady-State Thermal Transmission Propertie...

Company needs materials laboratory for Failure Analysis Testing of welded seam strength in air supported structures made out PVDF 28oz vinyl fabric. The seams of the fabric a...