Need Materials Testing or Scientific Research?

Save time and money searching by submitting a Lab Request.

Submit Lab Request


Want access to our Materials lab requests?

Create an Account

Most Recent Materials Laboratory Requests

Contract Laboratory has received the following Materials Laboratory Requests which need to be fulfilled! These Materials Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Materials Laboratory and Scientific Research. If you need a Materials Laboratory, please Submit a Materials Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Test Requests Service Requests Product Requests Business Request

Title:

PVC Floor Covering

Description:

Construction Materials Laboratory needed for ISO materials testing on PVC floor covering on textile backing to the following standards: ISO 105/B02 - EN 433 - EN ISO 26987 - EN 660-2

View More


Title:

ASTM Wax Testing

Description:

Materials Laboratory needed for ASTM Testing of several waxes to the following ASTM Standards: Melting Point, Ash Content, Congealing point (ASTM D938) Drop point (ASTM D3954) Penetration (ASTM D1321) Acid value (ASTM D1386) Particle Size (ASTM D185, <10...

View More


Title:

Monomer Analysis in Polymer

Description:

Large electronics company needs Polymer Laboratory for analysis of polymer materials to analyze the spectra and identify 7 monomers in the polymer together with their levels. We need to analyze the spectra for 7 monomers that are contained within 5 sample...

Requirements:

Please let us know what would be the best test method for the requested analysis.

View More


Title:

GMW Vehicle Interior Testing

Description:

Automotive Laboratory needed for GMW Testing of Vehicle Interior Materials to GMW16853 COMPREHENSIVE STANDARD FOR OVERALL EMISSION TESTING OF INTERIOR MATERIALS AND PARTS (FOGGING, ODOR, EMISSIONS, CARBONYLS, AMINES)

Requirements:

None

View More


Title:

LHAMA Art Products

Description:

CPSC Consumer Products Laboratory needed for ASTM Testing of the following 4 painting products to ASTM D-4236, Standard Practice for Labeling Art Materials for Chronic Health Hazards

Candle Holder Painting:
Sand Art Painting:
Glass Painting:
T-shi...

Requirements:

The US Consumer product safety comission is concerned speacially about the lead in the paint and also the warnings that should be displayed. They said that the toxicologist should recommend on this.

View More


Title:

Glycol Refractive Index

Description:

Materials Laboratory needed for ASTM Refractive Index Testing performed on a a hydantoin glycol used as a resin cross linker used in coatings and polymers to ASTM D 1218 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon ...

Requirements:

IAW ASTM D 1218 or equivalent. The material is , the Refractive Index specification is 1.4986 ? 1.5006 .

View More


Title:

Pathogen Testing

Description:

LONG-TERM TESTING Food Microbiology Laboratory needed for pathogen testing of flavoring materials including E. coli, Listeria, Salmonella, etc

View More


Title:

NFPA and ANSI Safety Harness

Description:

Materials Laboratory needed for NFPA and ANSI testing of 3 different types of personal protective equipment and rescue equipment harnesses. to the following standards NFPA 1893:2017 and ANSI Z359.11:2014.

Requirements:

Please send quote

View More


Title:

Lubricant DIN Testing

Description:

Materials Laboratory needed for DIN Testing to the following standards:
TEST NORM
DROPPING POINT DIN 51801, T. 2
DROPPING POINT DIN ISO 2176
BREAKING POINT (75 G/M²) DIN EN 12593
PENETRATION ...

View More


Title:

Acoustics proficiency tests for accreditation

Description:

ISO 17025 Materials Laboratory needed acoustics proficiency testing to the following ISO Standards:

(1) ISO 354 Measurement of sound absorption in a reverberation room
(2) ISO 10534:2 Determination of sound absorption coefficient and impedance in impe...

Requirements:

no

View More


Title:

Baby Crib Safety

Description:

Childcare Company needs Consumer Products Safety Laboratory needed for crib safety testing as per Health Canada regulations:

- SOR/2010-261 Cribs, Cradles and Bassinets regulations
- SOR/2005-109 Surface Coating Materials Regulations

The crib is al...

Requirements:

Need to be compliant with following Canadian safety regulations as per Health Canada:

View More


Title:

Adhesive Stability Studies

Description:

Materials Laboratory needed for stability studies of liquid adhesives

View More


Title:

Polymer Insulators Certificate Testing

Description:

ISO 9001 MATERIALS LABORATORY NEEDED FOR CERTIFICATE OF ANALYSIS PROPERTIES TESTING OF 23,120 SUSPENSION, RIGID AND POLYMER INSULATORS.

Requirements:

- ISO 9001
- OSHAS 18001

View More


Title:

ASTM Coating Testing - ASTM D4086, ASTM E1477, ASTM E1347.

Description:

Materials Laboratory needed for fiberglass pool.coating testing to 3 ASTM Standards ( ASTM D4086, ASTM E1477, ASTM E1347) to determine a dry lightness level (CIE L value) of 80.0 or greater and a wet luminous reflectance value (CIE Y value) of 50.0 or gre...

View More


Title:

Automotive Testing

Description:

Automotive Manufacturer requires a Laboratory to complete the following Testing:
* Resistance to Seam Wear
* Two different Materials to be used for Stick Shifter wrapping
* Jaguar specification TPJLR 52.005 (STJLR.51.5204)

Requirements:

TPJLR 52.005

View More


Title:

Elemental Analysis

Description:

Materials Laboratory needed for analysis of mineral samples for all elements specially rare elements used in construction of PV and dry cell batteries

View More


Title:

ANSI Polymer Membrane Testing

Description:

Construction Materials Laboratory needed for ANSI testing of flexible polymer membrane material for construction. to ANSI 118.10 certification requirement.

Requirements:

Lab certification for submittals to code officials.

View More


Title:

Dietary Supplement Raw Material and Finished Product Testing

Description:

LONG-TERM TESTING FDA cGMP compliant laboratory needed for identification of incoming powdered raw materials and finished product testing to show strength, purity and composition.

View More


Title:

Small Batch Formulation, Development and Testing

Description:

PRODUCT DEVELOPMENT Bioanalytical Laboratory needed for multiple testing including small sample batch formulations of a powdered biological product.. Required testing includes

1. Amino acid analysis
2. Elemental Analysis
3. Peptide Mapping
4. Organ...

Requirements:

- Would need lab to source individual amino acids for small batch formulation
- Would need lab who can run small sample batch formulations

View More


Title:

ANSI Heat and Cut Resistance

Description:

Marine Supply Company needs Materials Laboratory for ANSI testing for heat and cut resistance.

View More


Title:

Woven Reflective Materials testing to ASTM E2178.

Description:

Third-party Laboratory needed for ASTM Testing of woven high reflective breathable membrane to ASTM E2178.Standard Test Method for Air Permeance of Building Materials

View More


Title:

Printing Materials Testing

Description:

Industrial Laboratory needed to provide quote for heavy metals testing in printing materials such as ink, paper, varnish, starch for
Cadmium (Cd)
Lead (Pb)
Mercury (Hg)
Hexavalent Chromium Cr (VI)
Polybrominated biphenyl (PBB)

Polybrominated diph...

View More


Title:

ASTM Thermal Insulation

Description:

Company needs Materials Laboratory to provide a quote for ASTM Thermal Insulation Testing to ASTM C1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation

Requirements:

Please provide a quote.

View More


Title:

ASTM and ASME Architectural Natural Stone Testing

Description:

Cpnstruction Materials Laboratory needed for Architectural Natural Stone testing to multiple ASTM and ASME Standards including:those referenced in the Natural Stone Institute's Dimension Stone Design Manual, VI.

MATERIAL SPECIFICATIONS
ASTM C629
Sta...

View More


Title:

ASTM Building Materials Testing

Description:

Construction Laboratory needed for ASTM testing to ASTM E2178 Standard Test Method for Air Permeance of Building Materials

View More


Title:

Tempered Glass Evaluation

Description:

Materials Laboratory for tempered glass testing for possible manufacturing deficiencies

View More


Title:

Building Materials Standards Testing

Description:

Materials Laboratory needed for plastics testing.
1. NFP 92 503 Electrical burner test used for flexible materials thickness no more than 5mm
2. NFPA 286 Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to ...

Requirements:

Must be accredited by Government of India and TUV

View More


Title:

EU Migration Studies

Description:

Food Company needs Materials Laboratory needed for migration studies on plastic food liner bags to test for compliance with EU Food contact regulations.

View More


Title:

ISO Contact Lenses Analysis

Description:

FDA GLP Medical Device Laboratory needed for ISO testing of soft contact lenses according to ISO 18369-3 Ophthalmic optics -- Measurement methods and ISO 18369-4 Physicochemical properties of contact lens materials

Requirements:

the test need to be GLP

View More


Title:

Plastic Resin Regrind Testing

Description:

Materials Laboratory needed for plastic resin testing to determine the type of plastic resin and the melting temperature of plastic regrind.

Requirements:

Please provide cost.

View More


Title:

Thermal Conductivity and Heat Capacity Testing

Description:

Materials Laboratory needed for thermal conductivity testing and heat capacity testing on Insulation pulverized limestone products

View More


Title:

Waterproofing Testing

Description:

Materials Laboratory needed for ASTM testing of EPDM rubber waterproofing membrane based on ASTM D4637(Type I) requirements

View More


Title:

Eyewear Optical Density

Description:

Materials Laboratory needed for optical density/wavelength testing of eyewear

Requirements:

Can you please tell me how long it takes and also how much is the cost?

View More


Title:

ASTM Plastic Products Biodegradability Testing

Description:

LONG-TERM TESTING Disposable plastics company needs microbiology laboratory for ASTM biodegradability testing of a wide range of plastic disposable products to ASTM D5511-11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Material...

View More


Title:

PSTC Tape Adhesion Testing

Description:

Third-Party Materials Laboratory needed to test adhesion of tape to Pressure Sensitive Tape Council PSTC Standards: 180 peel to steel and 180 peel to self.

Requirements:

Please send quote. We can send protocol

View More


Title:

Cleavage Testing of Bonded Joints

Description:

Industrial Materials Laboratory needed for ASTM Cleavage testing of composite materials to ASTM D5041, Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints. Cleavage test, at ambient condition; and at 130 Deg F and 100% Rel...

Requirements:

ASTM D5041, cleavage test, at ambient condition; and at 130 Deg F and 100% Relative Humidity

View More


Title:

Concrete Testing

Description:

Materials Laboratory needed for ASTM Testing to ASTM C1077 - 17
Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

View More


Title:

Prefinished Plywood Testing

Description:

Materials Laboratory needed for prefinished plywood testing of abrasion & Scratch resistance, resistance to chemicals, cold,heat, hardness, etc.




Requirements:

Please provide estimate of cost

View More


Title:

Light Reflectance Values

Description:

Engineering Firm needs Materials Laboratory for ASTM Light Reflectance Value Testing to ASTM E1347 - 06(2015)
Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

Requirements:

Light Reflectance Values

View More


Title:

Water Proofing Paint Testing

Description:

Large corporation needs Materials Laboratory for ASTM Solar Reflectance Testing of water proofing paint:
1) Solar reflectance index (SRI value) in accordance -with ASTM E1980-01
2) Degree of solar reflectance in accordance with ASTM E-891:

Requirements:

View More


Title:

Polymer Composite Sheet Testing

Description:

LONG-TERM TESTING Materials Laboratory needed for acoustics properties and sound absorption evaluation of polymer composite sheets of size (250 mm X 380 mm) approximately of 2-5 mm thick sheets measuring Normal Incidence Sound Absorption Coefficient usi...

Requirements:

Sound Absorption parameters, Noise etc

View More


Title:

Shoe Water Resistance

Description:

Materials Laboratory needed for water resistance testing of waterproof boot and sock liner to EN 20811, Resistance to Water Penetration

View More


Title:

ASTM Abrasion Resistance

Description:

Industrial Materials Laboratory needed for ASTM Abrasion Resistance Testing to ASTM D4060-14;

Requirements:

National Accredited reports shall be issued

View More


Title:

Polyurethane Resin

Description:

Materials Laboratory needed for critical micelle concentration(CMC) curve using Dynamic Tensiometer (DCAT) for STD polyurethane resin versus surfactants

Requirements:

I need to have a STD polyurethane resin*(liquid state) tested versus different surfactants concentrations under a Dynamic Tensiometer (DCAT) to receive a critical micelle concentration(CMC) curve. The concentration of the surfactant added to each STD poly...

View More


Title:

Optical Testing

Description:

Large Innovative Electronics Company needs Materials Laboratory for wavefront optical testing.

View More


Title:

ANALYTICAL TESTS

Description:

Materials Laboratory needed for REACH compliant testing to the following 3 ASTM Standards

1.ASTM -D86, Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
2.ASTM D3710 Standard Test Method for Boiling R...

Requirements:

1.Analytical testing with Interpretation.
2.REACH compliant.
Please confirm.

View More


Title:

Determination of the Roughness and Deformation of Mirrored Surface

Description:

Materials Laboratory needed to measure the roughness and deformation of a concave mirror surface which is located on one ends of a 4-mm rod. The size of the concave mirror is 0.1mm.

View More


Title:

Quality Control Testing of Candles

Description:

LONG-TERM TESTING
Candle Manufacturer needs Laboratory for quality control raw materials testing to RAl-GZ-041 edition 2016, General Quality and Inspection Specifications for candles prior to selling products to major retailers including Walmart.

Requirements:

Kindly let us have your best quote, turn around time

View More


Title:

Biodegradability of Biomaterial Composites

Description:

Laboratory needed for ASTM seawater biodegradability testing of biomaterial composites to determine if the materials degrade in marine water to ASTM D6691 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Envi...

Requirements:

ASTM D6691

View More


Description:

Genomics Company needs laboratory for testing biological materials for opioid addiction, cancer related testing for KRAS, BRAF, NRAS, EGFR, 5FU and UGT1A1. Cyp 450 2D6, 3A4, 3A5, 2C19 and 2C9.

Requirements:

Opioid addiction, cancer related testing for KRAS, BRAF, NRAS, EGFR, 5FU and UGT1A1.

View More


Description:

NABL Laboratory needed for ASTM Testing of granite to ASTM 1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

Requirements:

NABL

View More


Description:

Construction Laboratory needed for testing and certification of flameproof building materials made from resin and recycled cardboard and/or paper including fire resistance, water resistance, density, impact resistance, thermal efficiency, flexural and com...

View More


Description:

LONG-TERM TESTING Materials Laboratory needed to measure the haze of a sapphire coating on glass

View More


Description:

Laboratory needed for materials testing of lump highly oriented pyrolytic graphite HOPG and Lump graphite

View More


Description:

Materials Laboratory needed for infrared transmittance testing on on laminated glass.

Requirements:

Please provide the cost.

View More


Description:

Materials Laboratory needed for physical testing of VHB tapes for strength, durability, aging, and resistance to temperature

View More


Description:

URGENT Large Industrial Machinery Company needs Materials Laboratory for impact, failure analysis and identification of the cause of filtration liquid turning yellowish with use of white felt bags used for filtrating liquids We need to understand the caus...

View More


Description:

Toxicology Laboratory needed for ASTM toxicity testing of chalk art materials to ASTM D-4236 Standard Practice for Labeling Art Materials for Chronic Health Hazards

View More


Description:

Materials Laboratory needed for NFPA Testing of 2 fabrics to NFPA 1971, Heat & Thermal Shrinkage (%) NFPA 1971

View More


Description:

LONG-TERM TESTING Dietary Supplement Manufacturer needs Analytical Chemistry Laboratory for quality control approval testing.of powdered raw materials.

View More


Description:

Large Construction Materials Company needs Analytical Chemistry Laboratory for phenol purity testing.

Requirements:

Phenol purity testing with test method

View More


Description:

Medical Device Manufacturer needs Contract Sterilizer for ETO and E-Beam sterilization experiments on materials used in medical devices.

Requirements:

discussion more

View More


Description:

LONG-TERM TESTING Construction Materials Laboratory needed for ASTM Testing of insulating sheets and tubes to ASTM C534 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

Requirements:

ASTM C534 for tubes and sheets

View More


Description:

Fine Furnishings Company needs Materials Laboratory for ASTM Testing to ASTM D648 Heat Deflection Temperature of Plastics

View More


Description:

Materials Laboratory needed for physical properties testing of adhesive transparent tape used in mattresses including thickness of adhesive coating,core thickness,peel strength,film thickness,width

View More


Description:

Large Manufacturer needs Materials Laboratory for forensic X-ray photoelectron spectroscopy XPS to determine the of particle contamination in a product.

Requirements:

XPS

View More


Description:

Large Manufacturer needs Materials Laboratory for ASTM testing of viscous adhesives to ASTM D56, Standard Test Method for Flash Point by Tag Closed Cup Tester. This test in mandated under the Canadian Canada Consumer Chemicals and Containers Regulations (...

View More


Description:

Materials Laboratory needed for chemical analysis of polypropylene fabric to the below specifications:

1. UV content analysis. we wish to know the exact active UV stabilizer content in the fabric sample (HALS, anti-oxidants, etc.)

Please note: We ...

Requirements:

Please inform us if you have the facility to carry out these tests and, if yes, provide me with quotations and the delivery lead time once the samples reach your facility.

Thanks in advance and looking forward to hearing from you soon!

View More


Description:

Materials Laboratory needed for ASTM C423 Sound absorption and Fire ASTM testing

View More


Description:

USA Large Beverage Company needs Materials Laboratory for adhesive coat weight testing. Similar to ASTM F 2217 or FINAT Test Method 12

View More


Description:

Materials Laboratory needed for analysis of the variation in dielectric strength measurement and surface analysis of an aluminum substrate that has a dielectric and various graphic inks printed on one side. The surface needs to be analyzed for variation ...

View More


Description:

START-UP Outdoor wear company needs materials laboratory for breathability and waterproofness testing of new textiles materials used in rain pants. Testing used to support a change in materials. The current material is waterproof up to 20.000mm and bre...

View More


Description:

Materials Laboratory needed for textile testing to AATCC and ASTM testing methods including tear strength, chlorine residue, dimensional stability, etc.

Requirements:

Tear strength, chlorine residue, dimensional stability, etc.

View More


Description:

URGENT Materials Laboratory needed for ASTM Testing of mineral and steam turbine oil to the following ASTM Standards:
ASTM D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

ASTM D2272 Stan...

View More


Description:

Materials Laboratory needed for fire testing of automotive nylon fuel lines

View More


Description:

Materials Laboratory needed for REACH testing of epichlorohydrin according to REACH requirements (EUROPE regulation)

Requirements:

Only compliance with REACH regulation.

View More


Description:

LONG-TERM TESTING Pharmaceutical Laboratory needed for raw material release and vendor qualification testing with full USP/NF/Ph.Eur. testing and method verification for three lots of all the following materials
Materials:
Cholesterol
Sucrose
L-Hist...

Requirements:

IMPORTANT Please provide me with a quotation as well as an assessment of your facilities capacity and availability to support all of these materials (or any limitations in terms of testing of specific materials you cannot support).

View More


Description:

Medical Device Laboratory needed for ASTM Testing of Protective Clothing to the following standards: ASTM F1670/F1670M Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood, ASTM F1671/ F1671M Stand...

View More


Description:

Large Manufacturer needs A2LA Materials Laboratory for ASTM Materials Testing to following ASTM Test Methods:
ASTM D695 Compressive strength,
ASTM D2990 Resistance to creep, ASTM E328 Stress relaxation properties

View More


Description:

Materials Laboratory needed for comparison testing of a new coating for light transmissivity test done on two pieces of glass coated with the old coating vs a new coating.

View More


Description:

Mechanical Laboratory needed for SAE testing of gasket to SAE J2659 (Test Method to Measure Fluid Permeation of Polymeric Materials By Speciation).

View More


Description:

Contract Sterilizer needed for ETO and E-Beam sterilization experiments on materials for medical devices.

View More


Description:

Materials Laboratory needed for ASTM thermal conductivity testing for thermal insulation of stone wool product. ( Rock wool)

Requirements:

Testing as per ASTM at mean temperature 100, 300, 400 and 600 deg C

View More


Description:

Printing company needs materials laboratory for a research study to determine the best adhesion to bottle and pouch components There 2-3 pressure materials to test on each component to learn which material works best yielding 1 material for both compone...

Requirements:

Please answer the following questions:
How long will take to complete the test? How much does it cost? We would like to have letter certifying the test results?

View More


Description:

Materials Laboratory needed for Surface Characterization Tests for granular activated carbons including SEM-EDS Analysis, BET Surface Area
BET Surface Area - Micropore and mesopore surface areas,
EDS - Elemental Analysis (C, H, O, N)
SEM - Morphology ...

Requirements:


View More


Description:

LONG-TERM TESTING Pharmaceutical Microbiology Laboratory needed for Ph Eur and USP Microbiology Testing on pharmaceutical raw materials, finished products and water including TAMC, TYMC, Escherichia coli, salmonella

Requirements:

compliance with Ph. Eur and USP

View More


Description:

Materials Laboratory needed for conducting a research study on paint to determine if the tested coated material is powder coated or liquid painted by identifying the presence of VOC in the coated material after paint application.

View More


Description:

Healthcare Manufacturer needs materials laboratory which is capable of luminescence testing on afabric coated in photo-luminescent liquid. Laboratory must be able to test for luminescene in millicandelas over time.

View More


Description:

Materials Laboratory needed for the determination of total mass loss and collected volatile condensable material from outgassing in vacuum environment of polymer material

View More


Description:

Automotive company needs materials laboratory for testing textile mats according :-GS 93026-1-PR 380.4-TL 2754531.6

View More


Description:

ISO 17025 Materials Laboratory needed for ASTM Testing of biodegradable plastic bags to ASTM 6954 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

Requirements:

- Have iso 17025
- Use the test method ASTM 6954
- Asian test area

View More


Description:

Materials Laboratory needed for silicon dioxide partials testing.

Requirements:

Please let me know the current tests packages, turnaround times and rates for the following tests if samples were send this week to Dec. for Silicon Dioxide partials.

View More


Description:

Analytical Chemistry Laboratory needed for the following analyses in cigarette filter material:

Citrate analysis
Determination of Diethylene glycol level
Determination Of The Total Denier And Crimp Of Cellulose Acetate Tow Used As Filter Material
De...

View More


Description:

Consumer Products Laboratory needed for compliance testing of art paints to ASTM D 4236 Standard Practice for Labeling Art Materials for Chronic Health Hazards

Requirements:

ASTM D 4236 compliance testing

View More


Description:

FDA registered laboratory with good cGMP practices needed that can fully test the following materials as per the USP requirements : 1)Magnesium Stearate, 2)Polyethylene Glycol, and 3)Titanium Dioxide

Please provide quote.

Requirements:

Please provide quote.

View More


Description:

Engineering company needs Materials Laboratory for testing liquid product to ASTM and ANSI Test Standards: who tests ANSI 118.10, For Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile
And Dimension Stone Installation, ANSI 118.12 speci...

Requirements:

Please send testing prices, samples required, and duration of the following tests for each ANSI and ASTM.

View More


Description:

URGENT / LONG-TERM TESTING Materials Laboratory needed to measure the AR coating on windows and lenses at 1590 and 1877 nm in the 0.05 - 0.2% range by IR Spectrophotometer

View More


Description:

Medical Device Manufacturer needs materials laboratory for grout analysis for reformulation purpose

Requirements:

IMPORTANT NOTE: Please provide quotation.

View More


Description:

Materials laboratory needed for measurements on an anti-reflection coating on both external surfaces of a cemented doublet measured. The diameter of the doublet is 110mm, and the focal length 500m. The reflectance of the coatings is specified as < 0.2% at...

Requirements:

Please keep my name and the company name confidential.
The testing should be done within the next 4 weeks.

View More


Description:

Materials laboratory needed for ANSI and ASTM testing of liquid membranes to ANSI 118.10, For Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile
And Dimension Stone Installation, ANSI 118.12, Crack Isolation Test and ASTM E96-00, Standa...

View More


Description:

Materials laboratory needed for weathering and performance testing of coatings to determine which will preserve and protect the outdoor signs from graffiti and the sun the longest, a specific film laminate, or a spray coating such as AkzoNobel Autocoat BT...

View More


Description:

Materials laboratory needed for optical testing to determine the luminescence and the evenness of the light across a part that is 3±0.5 cd/m^2 and evenness within 13%

View More


Description:

Materials laboratory needed for ISO and SAE testing of nonwovens textile for : Thickness SAE J882 SEP2012 Thickness ISO 9073-2/A at 0,5 kPa

View More


Description:

Apparel company needs materials laboratory for abrasion, sunlight and machine wash testing.

Requirements:

Please answer the questions below:

How long is the process? Is there a long wait period?
What are the costs?
How many Yards do you need for each test?

View More


Description:

Medical Device company needs materials laboratory for comparison of two adhesives to determine similarities and differences between the two such as chemical constitution, curing, strength etc.

Requirements:

We would like a report/summary of chemical constitution, curing, strength etc. for a couple lots of adhesive

View More


Description:

Materials laboratory needed for ISO polypropylene testing: charpy impact strength analysis according to ISO 179-2/1eU for Notched and unnotched Polypropylene specimen at 23C

View More


Description:

LONG-TERM TESTING Aerospace company needs materials laboratory for testing new aircraft part including mechanical property testing for composites and plastics.Our immediate needs are tests for Flexural and Bearing strength of Lamitex Fr-4 Glass/Epoxy mate...

View More


Description:

Chemical company needs materials laboratory for ASTM surface tension testing by ASTM D1331-14 Method A across the temperature range of 15-40C on a sample of odorless mineral spirits.

View More


Description:

LONG-TERM TESTING Materials laboratory need for optical testing of polycarbonate resin lenses for transmittance, visible light wavelength blocking, and various other measurements.

Requirements:

I would like to speak with someone prior to submitting samples to ensure you have the capabilities I need to complete the desired testing.

View More


Description:

INDIVIDUAL Materials laboratory needed for quality and composition testing of pure rock-wool insulation

View More


Description:

Food importer needs food laboratory for product development and FDA testing of dried fruit including
nutritional and allergen analysis including a system of drying, preservation and packaging. As they are dried naturally and maybe predisposed to worms, ...

Requirements:


View More


Description:

Polymer laboratory needed for Forensic and Root Cause analysis of the manufacturing of RF welding of vinyl PVDF AND PVC materials

View More


Description:

NABL materials laboratory needed for grease testing.

View More


Description:

Large petfood company needs experienced and accredited laboratory for the characterization of particle size, especially the % of particles with size smaller than 100nm in powder materials by Electron Microscopy.

View More


Description:

Consumer Products Safety laboratory needed for LHAMA / ASTM testing of children's paint product and art material formulations for conformance to ASTM D-4236 (LHAMA) Labeling of Hazardous Art Materials Act

Requirements:

Able to test a children's paint product. Adhere to Labeling of Hazardous Art Materials Act (LHAMA) and conform to ASTM - 4236.

View More


Description:

Materials laboratory needed for preparation and evaluation of the resulting properties of an elastomer (styrene + isoprene) when mixed with some ceramic fillers (BaTiO3 and others) including measuring the resulting dielectric constant, dielectric breakdow...

Requirements:

See above

View More


Description:

START-UP Small start-up business needs food / agriculture laboratory for comparison study of the nutritional content analysis of vegetables grown with new compost materials versus traditional farming methods. 

View More


Description:

Materials laboratory needed for ISO testing of cleaning abrasive to ISO 11126-10 Standard, Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives
2.Cleaning and Consu...

View More


Description:

URGENT Analytical chemistry laboratory needed for cosmetic raw materials testing forfor nitrsosamines (including NDLEA) and secondary amines ASAP.. The cosmetics raw materials are (tea/ TEA iodide)

Requirements:

according to EU standards

View More


Description:

Materials laboratory needed for ASTM bench mark testing of acrylic caulks. Tests needed include
Application Rate v2 ASTM C1183
Boeing Flow ASTM D2202
Tack Free Time (TFT) ASTM C679
Shore A Hardness ASTM D2240
Tensile ASTM D412
Elongation ASTM D412 ...

View More


Description:

Materials laboratory needed for testing of aerospace cleaner to AMS 3167, Solvents, Cleaning for Cleaning Prior to Application of Primer and Top Coat Materials
cleaning solvent.

View More


Description:

NATA accredited construction materials laboratory needed to perform a Flame Index Test to ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials

View More


Description:

Refinery needs materials laboratory needed for determining Mettler melt point in wax

Requirements:

None

View More


Description:

Materials laboratory needed for testing depth of impressions on the surface of an embossed nonwoven sheet (approximately 25 samples).
using the method Laser Triangulation or Laser Profile Measurement

Requirements:

Data to remain Confidential

View More


Description:

Company interested in acquiring an analytical laboratory in Saudi Arabia for the testing for quality assurance, testing, inspection, and certification of Agrochemicals & Pesticides, Basic & Industrial Chemicals, Dyes & Detergents, Lubricants & Greases, N...

Requirements:

Testing of Products like to name few.

View More


Description:

Materials laboratory needed for ASTM Testing of plastics to ASTM D2990 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep, Rupture of Fiberglass Reinforced Plastics.

Requirements:

Conduct a test for Fiberglass Reinforced Plastic

View More


Description:

Performance laboratory needed for ASTM and ISO testing of protective fabric used in coveralls to ASTM F2130, Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials o...

View More


Description:

Automotive laboratory needed for ANSI testing of glazing materials (glass) to ANSI Z26.1, American National Standard
for Safety Glazing Materials
for Glazing Motor Vehicles
and Motor Vehicle Equipment
Operating on Land Highways
- Safety Standard

Requirements:

Z26.1 requirements (Tests 1, 2, 3, 4, 9,12, 15, 18, 26)

View More


Description:

LONG-TERM TESTING Materials laboratories needed for proficiency testing for inter-laboratory comparisons for method validation (and) accreditation of the following four ISO standards:

ISO 4589-2:2017, Plastics -- Determination of burning behaviour by o...

View More


Description:

Automotive laboratory needed for a chemical compatibility verification procedure to ASHRAE 97 standard, Sealed Glass Tube Method to Test the Chemical Stability of Materials for Use within Refrigerant Systems

Requirements:

Must be experienced with this specific ASHRAE 97 procedure and must have done this procedure before.

View More


Description:

Materials laboratory needed for flammability of industrial, coated textiles to two BS Specifications including: BS 7837:1996,Specification for flammability performance for textiles used in the construction of marquees and similar textile structures BS ...

View More


Description:

Materials laboratory needed for NFPA testing of goggles to NFPA 1977-11 for Heat and Thermal Shrinkage Resistance for goggles.

View More


Description:

URGENT Materials laboratory needed for ASTM Testing in Geomembranes to ASTM D 1505 ASTM D 599 ASTM D 1004 ASTM D 4833 ASTM D 5596 .

View More


Description:

Materials laboratory needed for chemical analysis of smell during processing of release base paper product. using a silicon.

View More


Description:

Materials laboratory needed for reflectivity measurements for Anti-Reflection AR coated glass plates. The glass plates are 4.75 x 3.75 x 0.063 in size.

View More


Description:

Materials laboratory needed for testing 5 - 6 different hot melt glue sticks for their viscosity, open time, cure time and other technical details that lab can provide.

Requirements:

Please provide costs. Confidential.

View More


Description:

Textiles laboratory needed for AATCC and ASTM textile and laundry testing of bedding materials to several standards including AATCC TM96, ASTM D3775, ASTM D 3776, ASTM D5034, ASTM D1424/D2261, ASTM 3512

Requirements:

AATCC TM96, ASTM D3775, ASTM D 3776, ASTM D5034, ASTM D1424/D2261, ASTM 3512

View More


Description:

Construction materials laboratory needed for ASTM testing of Calacatta Marble as per ASTM C 503,Standard Specification for Marble Dimension Stone.

Requirements:

ASTM C 503 Specification

View More


Description:

Materials laboratory needed for burn rate test used to determine if a matrix can be classified as a Flammable Solid under
US Department of Transportation regulations 49 CFR 173.124

View More


Description:

Nanotechnology company need materials laboratory for ASTM rain repellency testing via a Bundesmann Water Repellency Tester

Requirements:

ASTM

View More


Description:

AUTOMOTIVE LABORATORY NEEDED FOR VOV EMISSIONS TESTING TO GMW16853 COMPREHENSIVE STANDARD FOR OVERALL EMISSION TESTING OF INTERIOR MATERIALS AND PARTS (FOGGING, ODOR, EMISSIONS, CARBONYLS, AMINES)

Requirements:

Targeting the Chinese market that is sensitive to aldehydes

View More


Description:

Bioharmaceutical Contract Research Organization needed for initial method development and qualification of sterility, mycoplasmas, and bioburden tests for biologic materials.

View More


Description:

Large automotive company needs materials laboratory for textile air permeability testing.

View More


Description:

Pharmaceutical analytical chemistry laboratory needed for Identification testing for various USP hazard materials specifically Phenol ID Test A & B. Other hazard materials in the future.

View More


Description:

Aerospace Laboratory needed for ASMT material testing for atomic oxygen to ASTM E2089 Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications

Requirements:

In the USA

View More


Description:

Materials laboratory needed for powder coatings testing applied to metal panels. The topography and texture of powder coating surfaces to image and quantify roughness and identify patterns

Requirements:

Powder coatings would typically be pre-applied to 3"x5" metal panels

View More


Description:

Materials laboratory needed for USDOT certification testing of 30 gal bio boxes for transporting Corrosive Class 8 UN3261 materials.

Requirements:

DOT CERTIFICATION

View More


Description:

Construction materials laboratory needed to conduct ASTM and AASHTO testing of asphalt binder to ASTM D2006 Method of Test for Characteristic Groups in Rubber Extender and Processing Oils by the Precipitation Method and AASHTO T 315-12, Standard Method of...

View More


Description:

Construction laboratory needed for ASTM testing of floor covering system using radiant heat energy source to 2 ASTM standards

ASTM E 648, Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

AS...

Requirements:

,More than or equal to 0.50 watts/sq.cm. Standard Method for specific Optical Density of smoke Generated by solid.

View More


Description:

Construction materials laboratory needed for vinyl flooring testing to ANSI/ESD STM 7.1 Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items on 3 vinyl floor covering products

View More


Description:

Materials laboratory needed for UV resistance testing in HDPE Corrugated Flexible Pipe used as an electrical conduit

Requirements:

UV Resistance

View More


Description:

Metallurgical laboratory needed for ISO maximum bubble test on sintered metal, as per ISO 4003, Permeable sintered metal materials -- Determination of bubble test pore size

View More


Description:

Large automotive parts company needs materials laboratory for product testing for the presence of asbestos

View More


Description:

Toxicology laboratory needed for performing a Toxicology Risk Assessment and Labeling of art materials as per the LHAMA Labeling of Hazardous Art Materials Act as per ASTM D4236 Standard Practice for Labeling Art Materials for Chronic Health Hazards

Requirements:

Confidential

View More


Description:

Materials laboratory needed for testing to support expiration date extension for adhesive tapes used in aerospace industry

Requirements:

Please provide pricing in response

View More


Description:

Materials laboratory needed for measuring heat insulation properties of clothing insulation to the current industry standard for hand warmers. The laboratory would need to be able to measure temperature of the hand warmers every five or ten minutes over a...

View More


Description:

Food laboratory needed for EC 1935 migration testing for food contact materials on a water pouring device made from copper

Requirements:

EC 1935 Migration Test

View More


Description:

Materials laboratory needed for ISO creep testing under compression as per ISO 8013, Rubber, vulcanized -- Determination of creep in compression or shear

View More


Description:

Construction materials laboratory needed for physical testing of Fiber Reinforced Polymer (FRP) Reinforcing Bar including 160 samples tested for durability in accordance with the following standards:

-AC320 (an acceptance criteria from ICC)
-Condition...

Requirements:

Laboratory must have experience of ASTM D 2247 and ASTM C 581 and also tensile testing of very strong smooth FRP bars

View More


Description:

Materials laboratory needed for testing waterproofing membrane for
1 - hydrostatic head resistance (an independent test) required values: 70m (231ft),
2 - wet/dry cycling (an independent test) required values: no effect @ 25 cycles at 231ft, and
3 - ...

Requirements:

IMPORTANT NOTE - Please provide quotation with response
Bentonite Mass Per Unit Area ASTM D 3776 (mod.) 1.0lb/sqft (4.8kg/sqm)
Peel Adhesion to Concrete ASTM D 903 (mod.) 15 lbs/in (2.6kN/m min)
Hydrostatic Pressure Resistance ASTM D 5385 (mod.)...

View More


Description:

Hardscape company needs geology laboratory needed for testing rock used for housing yards and roads to confirm absence of harmful materials.

View More


Description:

Materials laboratory needed for biodegradation testing of Linear Alkyl Benzene Sulphonate (LAS) as per Protocol ASTM D 2667. The active substance degradation is monitored by presence of Methylene Blue Active substance

Requirements:

Please provide details of the cost and duration of time required for testing.

View More


Description:

Materials laboratory needed for ASTM testing of newmarine coating to ASTM D4939 Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater and ASTM D5618 Measurement of Barnacle Adhesion Strength in Shear on materials

View More


Description:

Construction materials laboratory needed for properties testing of a resin/cement blend for oilfield use including compressive strength (MPa), flexural strength (MPa), E-modulus / elasticity (MPa), rupture elongation (%), tensile strength (MPa), and failu...

View More


Description:

Automotive materials laboratory needed for SAE thermal insulation testing to SAE J 2302 Thermal Effectiveness of Sleeve Insulation.

View More


Description:

Construction materials company for agriculture needs polymer laboratory to test content analysis of PVC

View More


Description:

LONG-TERM TESTING Materials laboratory needed for quarterly ASTM testing of tape for minimum peel strength of 60 oz/inch width when tested in accordance with ASTM D 3330, Method A for 3M 250 flat back tape.

Requirements:

We would need certificate of conformance and testing every 3 months to extend tape shelf life from 12 months up to 2 years.

View More


Description:

Materials microbiology laboratory needed for preservative effectiveness testing of a coating.

Requirements:

***IMPORTANT NOTE Please put turn-around time and quote in response.

View More


Description:

Analytical chemistry laboratory needed for cosmetics ingredient analysis of herbal extract raw materials.

View More


Description:

Packaging laboratory needed for ASTM testing of packaging material for cushioning curve of packaging materials by the ASTM D-1596 test method, Dynamic Shock Cushioning Characteristics of Packaging Material. This ASTM test method uses acceleration-time dat...

View More


Description:

Materials laboratory needed for adhesive testing for bond strength of adhesive to metals

View More


Description:

University research scientist needs materials laboratory for thermal conductivity testing of composites across varying temperature ranges.

Requirements:

Please specify cost and the timeframe in which you can conduct the testing in your response.

View More


Description:

Petrochemical company needs laboratory for ASTM sand slurry testing for ultra-high-molecular-weight polyethylene UHMWPE per ASTM 4020 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

Requirements:

Able to do testing according to ASTM 4020

View More


Description:

Automotive laboratory needed for SAE electrochemical resistance testing of coolant hose and materials. As per SAE J1684 Method #1, referred to as a Brabolyzer test, is a whole hose test.

View More


Description:

Materials laboratory needed for comparison study of the Coefficient of Friction (COF) of two lubrication sticks according to BS EN - Annex L.

Requirements:

I want to compare the COF and retaining of the film.

View More


Description:

URGENT Large corporation needs automotive laboratory for UN testing of coating tint used on windscreen/windshield to ISO 3537 Headform testing for automotive windscreen/windshield or UNECE R43, Uniform provisions concerning the approval of safety glazing ...

View More


Description:

Pharmaceutical analytical chemistry laboratory needed for USP testing of TiO2 raw materials used as an excipient in an OTC drug product

View More


Description:

Food analytical chemistry laboratory needed for product development study to evaluate the processing of a fortified coffee drink to ensure that the fortified materials withstand processing. Use of mass spectroscopy (MS), HPLC, gas chromatography, liquid c...

View More


Description:

Building company needs construction materials laboratory for waterproof / resistance testing on windows.

View More


Description:

University research scientist needs materials laboratory for tensile strength analysis of a biocompatible polymer nanocomposite.

View More


Description:

Automotive laboratory needed for FMVSS flammability testing according to FMVSS 302, Flammability of materials used in the occupant compartments of motor vehicles

View More


Description:

Polymer laboratory needed for materials testing to Atex Zone 20, 21, and 22 directives for use of a polyurethane coating for use in multiple industries (ex: sugar, cereal, and wood) in the presence of an explosive atmosphere due to a cloud of combustible...

Requirements:

The polymer is a polyurethane coating on a roller.

Eur-Lex Atex 2014-3-EU
CSI_Atex-2014-34-EU Guidelines 1st Edition April 2016
Directive Machines 2006-42-CE England

View More


Description:

Medical device laboratory needed for biodegradability testing on two different types of medical gloves to ASTM D5511 - Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

Requirements:

Comparison of two different glove types in terms of biodegradability

View More


Description:

Metallurgical materials laboratory needed to quantify surface roughness of thin metallic strips (interferometry, atomic-force microscopy AFM, etc.)

Requirements:

Please keep contact information and company confidential.

View More


Description:

Materials laboratory needed for integrity / life expectancy testing of PVDF and Tedlar used in Supported Structure industry and Fabric Structure industry. The textiles are used in products that have a life expectancy of 20 years and need weathering verif...

View More


Description:

Materials laboratory needed for confirmatory testing of jointing materials for sewer drains to DIN 4062, Cold processable plastic jointing materials for sewerdrains - Jointing materials for prefabricated parts of concrete, requirements, testing and proces...

Requirements:

Root Penetration

View More


Description:

Materials certification laboratory needed for thermal conductivity testing of lightweight concrete to ASTM C177 Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus at 200 - 300 Celcius

Requirements:

Certification required for International Consultant

View More


Description:

Materials laboratory needed for ASTM Thermal Stiffness property testing as per ASTM D 1043 Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test of 3 rubber parts. The property measured by this test is the apparent modu...

View More


Description:

Materials laboratory needed for determination of optical transmission characteristics of red plastic lens resin used in laser receiver products. The optical transmission characteristics are important for this part so that it can filter sunlight while p...

View More


Description:

Materials laboratory needed for thermal conductivity testing of an automotive thermal cover as per Ford specifications WSSM9932B (3.9.1): Thermal Conductivity (C518) and (3.9.3)Thermal Sleeve Heat Insulation

View More


Description:

Accredited materials laboratory needed for DIN EN testing of glass reinforced plastic part adhesives to DVS 1618/DIN 54457 test of lap shear strength according to DIN EN 1465, drum peel test according to DIN EN 1372

View More


Description:

ISO 17025 accredited automotive materials laboratory needed for solar / UV simulation testing of automotive laminated glass to DIN 75220, Z OUT conditions.

Requirements:

ISO 17025 accreditation

View More


Description:

Medical device / materials laboratory needed for ASTM testing of personal protective equipment / gloves to ASTMF2878-10 (Needle Stick Test)

View More


Description:

Large corporation needs materials laboratory for ASTM slip resistance testing of polymer and acrylic prototype bathroom tiles to ASTM 462, Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities

View More


Description:

Materials laboratory needed for polymer testing by gel permeation chromatography / size exclusive chromatography on polymer molecules with MW ranging from 100 to 100k via Phenomenex GPC/SEC column or similar column capable of separating polymers of ranged...

Requirements:

Phenomenex GPC/SEC column or similar column that is capable of separating polymers of ranged MW.

View More


Description:

Materials laboratory needed for IEC testing of adhesive tapes to IEC 60454 (pressure-sensitive adhesive tapes for electrical purposes) including tensile strength, elongation at break, flexibility, electrical conductivity, adhesiveness, weathering testing,...

View More


Description:

Materials laboratory needed for ASTM thermal conductivity testing of plastic roofing product to ASTM C518 (Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus test) .

View More


Description:

Materials laboratory needed for NRR/SNR rating of protective earmuffs to meet standard ANSI S3.19 and if possible EN 352-1: 1993 desired.

View More


Description:

Materials laboratory needed for ASTM testing of grease / lubricant for carbon residue. Reference samples as per MRC Test / ASTM D-4530, Low Carbon 0.3 %c

View More


Description:

LONG-TERM TESTING Medical device materials laboratory needed for ASTM testing: active Af temperature of wire using DSC per ASTM F2004, Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis

Requirements:

Able to carry out DSC testing on wires according to ASTM F2004.

View More


Description:

Construction materials laboratory needed for plastIcs testing for identification of additives in plastic pipes

View More


Description:

Materials laboratory needed for gel permeation chromatography (GPC) for molecular characterization of natural rubber. Mn, Mp, Mz, Mz+1, Mv, bulk IV, and bulk Mw numbers will be needed in the report.

View More


Description:

Construction materials laboratory needed for ASTM testing of flooring to ASTM E1007: Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures.

View More


Description:

Plastics construction materials company needs laboratory for Solar Reflectance Index SRI measurement for LEED compliance to ASTM E1980

Requirements:

My understanding is that this is under the standard of ASTM E1980, but would need clarification

View More


Description:

Materials laboratory needed for development of fire retardant rubber products as per EN 4554 fire testing of materials and components for trains

Requirements:

as per EN 45545

View More


Description:

Polymer laboratory requested for migration study of a resin used in food contact (packaging) materials.

Requirements:

Resin has already received FDA approval, however the company purchasing this resin for use in their food packaging materials requires a migration study.

View More


Description:

Large corporation needs polymer laboratory needed for molecular weight distribution of natural rubber materials by light scattering detector and viscometer measuring for confirmation of Mw, Mn, Mz, DPI, alpha, and M-K plot

Requirements:

confirmation Mw, Mn, Mz, DPI, alpha, M-K plot

View More


Description:

Materials laboratory needed for expanded rubber testing studies to three DIN EN ISO Standards:
- Coefficient of thermal conductivity according DIN EN ISO 8497,
- Water vapor diffusion resistance factor according DIN EN ISO 12086
- Fire behavior accor...

Requirements:

Material: Expanded rubber

View More


Description:

Large company needs materials laboratory for identification testing of powder coating used in lining for valves. We believe that it is polypropylene but need to have identification confirmed.

View More


Description:

UK geology laboratory needed for clay testing for suitability for end uses as clay bricks, tiles, ceramics etc. Scope of testing to include:

Stage 1

An initial gradient firing on each borehole material (10 samples) to determine the firing temperatu...

Requirements:

If you are only able to complete some of the scope or would use different test methods then please quote on that basis.

View More


Description:

Construction laboratory needed for materials and toxicity testing of naval thermal insulation testing to various standards including: NCD 1427 : SPECIFICATION FOR MINERAL WOOL MARINE BOARD FOR THERMAL AND ACOUSTIC INSULATION ON BOARD INDIAN NAVAL SHIPS
...

Requirements:

NCD 1409
Determination of Toxicity Index

NCD 1410
Determination of Oxygen Index

NCD 1411
Determination of Smoke Index

BS 476 Part 7
Fire Tests on Building Materials and Structures Surface Spread of Flame Tests for Materials

View More


Description:

Materials laboratory needed for ASTM testing for thermal conductivity of nitrile rubber Insulation foam at 0, 20, and 40 Celcius to ASTM C 518 and ASTM C 177 test methods

Requirements:

Thermal Conductivity of Nitrile rubber Insulation foam at 0, 20 and 40 Deg Celcius.
ASTM C 518 and ASTM C 177 test method

View More


Description:

Acoustics company needs laboratory for testing to ECSS- Q-ST-70-02, Spacecraft Product Assurance (thermal vacuum outgassing test for the screening of space materials) to determine RML and CVCM rates.

Requirements:

need to be able to measure RML<1.0% and CVCM<0.1%
The laboratory nedd to be in north america

View More


Description:

Automotive parts company needs physical materials laboratory for ASTM flammability testing to ASTM D6668 - 01(2016) Standard Test Method for Discrimination Between Flammability Ratings of F=0 and F=1

View More


Description:

ISO 17025 certified laboratory needed for OECD physical / chemical testing of solid materials and an octanol / water solution as per three OECD standard methods: OECD107 Partition Coefficient (n-octanol/water): shake flask method , OECD 117 Partition Coef...

Requirements:

Required by customer

View More


Description:

Construction materials laboratory needed for bisphenol BPA testing in polypropylene sheets

View More


Description:

Polymer company needs materials laboratory for ASTM Testing of sodium chloride ice-melt / deicing properties

View More


Description:

LONG-TERM TESTING Materials laboratory needed for ASTM physical, mechanical, and accelerated aging testing of polymer auto parts to car manufacturers specifications WSS-M2D496 (Ford), GMW 14196 (General Motors), MS-AY-549 (Chrysler-Fiat) including:
WSS-M...

View More


Description:

LONG-TERM TESTING Materials laboratory needed for ASTM & FED-STD textiles testing for non-fibrous and soluble materials content using soxhlet extraction procedure to FED-STD-191 and absence of detectable silicone grease and oil determined by Fourier Trans...

View More


Description:

LONG-TERM TESTING Pharmaceutical analytical chemistry laboratory needed for raw vitamin and nutritional supplement materials purity & impurity testing by HPLC analysis for:
72-18-4, L-Valine;
3040-38-8, N-Acetyl-L-carnitine;
5785-44-4, Tricalcium Dicit...

Requirements:

Have HPLC Reference substances available

View More


Description:

Polymer laboratory needed for monomer coating testing after curing process to determine monomers left on garment after curing by LED UV printers and lamps to cure the liquid on cotton and synthetic materials.

Requirements:

Preferably a facility close to Connecticut.
Test for any liquid monomers left in the garment.

View More


Description:

LEGAL Materials laboratory needed for performance, weathering and failure investigation testing of potentially defective, two coat, acrylic elastomeric liquid coating used for roofing on commercial building. Polymer coating that instead of coating and dr...

View More


Description:

Materials laboratory needed for NATO STANAG Testing of gun cases for dry heat, low temperature, impact, and vibration testing according to STANAG 4280 to meet NATO approval for gun carrying cases.

View More


Description:

Large corporation needs metals materials laboratory for RoHS testing for plain-carbon steel wires of various sizes, grades, and treatments. Wire is in continuous length, but can be cut to length needed for testing. Diameters range from 0.034 to 0.625.

View More


Description:

Materials laboratory needed for ANSI Testing of LED Smart Film products to meet welding filter requirements of ANSI Z87.1-2015 table 6, American National Standard for Occupational and Educational Personal Eye and Face Protection Devices

View More


Description:

Materials laboratory needed for ASTM explosives testing to ASTM E595, total mass loss and collected volatile condensable materials from outgassing in a vacuum environment testing of explosives.

View More


Description:

Materials laboratory needed for SAE Testing of adhesive tape to SAE-AMS-T-22085 Type II

View More


Description:

Composite materials laboratory needed for ASTM D1781 standard test method for climbing drum peel for adhesives or DIN 53295 testing of sandwiches; peel test by means of a drum on adhered metals.


View More


Description:

Polymer laboratory needed for ASTM testing of flexible cell materials (ethafoam-180) to ASTM D3575 and ASTM D3576.

Requirements:

The Material is, "Ethafoam 180" (PE EXT 2 lb. foam).
Must be tested IAW ASTM D3675 and ASTM D3576.

View More


Description:

Materials laboratory needed for softening point and/or heat deflection point of several polyurethane based polymers.

View More


Description:

Materials / Polymer laboratory need for analytical chemistry testing: optical polarimetry for chirality of two separate bisphenol A (BPA) epoxy resins.

View More


Description:

LONG TERM TESTING. Materials laboratory needed for thermal imaging of coating for reflectivity tests to extract emissivity number using a diffuse gold standard. Coating is used to prevent radar detection.

Requirements:

We run these reflectivity tests and extract the emissivity number as the one's complement. We have entered a manufacturing period and will need several samples done every few weeks for some time.
8-12 micron

View More


Description:

Aerospace company needs materials laboratory needed for polymer testing for the dielectric strength in cured poly-sulfide rubber.

View More


Description:

Health company needs materials laboratory needed for non-destructive NDT optical testing including surface roughness analysis of non-flat surface.

Requirements:

Non-destructive, preferably optical.

View More


Description:

Consumer safety / building materials laboratory needed for safety, durability, and structural performance testing of a cabinet unit according to ANSI/BIFMA X5.9-2012.

Requirements:

ANSI/BIFMA X5.9-2012.

View More


Description:

Plastics Laboratory needed for Automotive Materials Testing to GMW14797 APOP Painted Plastic Parts Performance Requirements

View More


Description:

ASTM materials laboratory needed for total mass loss and collected volatile condensable materials from outgassing in a vacuum environment testing of un-reinforced polypropylene per ASTM-E595.

Requirements:

Outgassing test per ASTM-E595 to determine the total mass loss and volatile condensable material content.

View More


Description:

Engineering company needs materials laboratory for environmental simulations testing of GRP (Glass-Fibre Reinforced Plastic) ground anchor for UV stability testing in accordance with ES ISO 4892-2 , performance at elevated temperatures is in accordance ...

View More


Description:

Automotive Parts Company needs VW validated materials laboratory for VW Testing to VW 50180 odor test

Requirements:

The laboratory needs to have validation by VW group

View More


Description:

NABL materials laboratory needed for rubber rheology testing of optimum cure time & temperature of a liquid silicone rubber using a rheometer.

Requirements:

NABL accredited
India laboratory preferred

View More


Description:

Materials Laboratory needed for testing on a steel grade silica ceramic blanket.

Flammability to ASTM F 1462.

Thermal Conductivity to ASTM C518-19983.

Thermal Shock Resistance to ASTM D-30324.

Chemical Sustainability to ASTM D-6455.

Min...

Requirements:

India preferred.

View More


Description:

Materials laboratory needed for ASTM testing of freestanding 50um plastic films for yellow index ASTM E313 or equivalent and index of refraction ASTM D542 or equivalent. Raw data and reports needed.

Requirements:

Raw data must be provided with any generated reports

View More


Description:

Materials science laboratory needed for SEM imaging for mineral identification looking for tellurium presence.

Requirements:

I want to identify the minerals by SEM I have finely ground samples ready, and am particularly looking for the minerals common to tellurium.

View More


Description:

Materials (textiles) laboratory needed for protective clothing testing to check the cut resistance of protective textiles to ASTM 2992 or F1790 using TDM 100 cut machine.

Requirements:

Test method ASTM F2992 or F1790 using TDM100 cut machine.

View More


Description:

Bioanalytical laboratory needed for quality control testing of reference materials, including identification and purity assay by HPLC, LCMS, IR, UV-Vis, NMR, Polarimetry

Requirements:

HPLC, LCMS, IR, UV-Vis, NMR, Polarimetry

View More


Description:

Construction Materials Laboratory needed for strength and durability check of glass reinforced fiber GRF material.

View More


Description:

Large Chemical Company needs materials laboratory for ASTM combustion testing for measuring the optical density of smoke, and surface flammability of materials according to ASTM E662 and ASTM E162.

Requirements:

ASTM E162
ASTM E662
BSS 7239

View More


Description:

Materials laboratory needed for environmental simulation testing of a rubber door sweep product:

Ultraviolet & infrared light

High (150F) and low (-25F) temperatures

Chemicals such as aqueous salt solution, floor cleaners & disinfectants

Requirements:

Samples Required:
Each test will require one sample per test plus one control sample for comparison.
Ultraviolet & infrared light - 2 total
High (150F) and low (-25F) temperatures - 2 total
Chemicals such as aqueous salt solution, floor cleaners & d...

View More


Description:

Mechanical Laboratory needed for ASTM outgassing testing for mechanical part with ASTM E595, Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment . Please advise

Requirements:

Confidential

View More


Description:

Pharmaceutical laboratory needed for ICH, FDA, and USP testing on OTC sunscreen API and finished topical products including: 1) stability test on our finished sunscreen products for the claimed shelf life of 3 years as per the US FDA requirement, 2) pres...

View More


Description:

Plastics / Materials Laboratory needed for ASTM physical testing of plastic crates from different suppliers including:
Raw material tests as per ASTM D4976 + ASTM D5203, density, melt flow rate, elongation at break, tensile strength, UV resistance, stres...

Requirements:

-

View More


Description:

Construction company needs materials laboratory needed for ASTM testing of insulation material to ASTM C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers , emissometer, emittance and A...

Requirements:

ASTM c 1371 and ASTM c 1549

View More


Description:

Analytical chemistry laboratory needed for glass fiber testing for sulfur content

View More


Description:

Geo-electrical laboratory needed for testing of ground enhancing materials according to IEC 62561-7:

1. Leaching test - Based on EN12457 - 2 Part 2 and EN ? 12506

2. Sulfur test - Based on ISO 4689-3 : 2004

3. Corrosion test - Based on LPR metho...

Requirements:

IEC 62561-7 and NABL approved laboratory.

View More


Description:

Automotive textiles company needs materials laboratory needed for SAE accelerated weathering testing to SAE J2527 testing using Q-Sun Xenon Test Chamber Xe-3 weatherometer or similar machine (xenon accelerated weathering of fabric) for 500 hours and 1000...

Requirements:

SAE J2527 using Q-Sun Xenon Test Chamber Xe-3 weatherometer or similar machine

View More


Description:

Medical Device company needs materials laboratory for mirror testing for reflectivity in the spectra range 600 nm - 1100 nm.

Requirements:

India preferred.

View More


Description:

Polymer laboratory needed for Tg (glass transition temperature) testing of a polyacrylate, which is provided in an emulsion. Determination of Tg of a polyacrylate, which is provided in an emulsion mixture. The emulsion includes the polyacrylate, an additi...

Requirements:

Determination of Tg of a polyacrylate, which is provided in an emulsion mixture. The emulsion includes the polyacrylate, an additional polymer (which may also be a polyacrylate), water and at least two more non-polymeric materials. The mixture will be sen...

View More


Description:

Materials Laboratory needed for ASTM Tensile and ELongation Testing to ASTM D1055-09, Standard Specifications for Flexible Cellular Materials-Latex Foam

Requirements:

Tensile and Elongation

View More


Description:

LONG TERM. cGMP pharmaceutical laboratory needed for compendial testing of the following raw materials: mannitol, trehalose, polysorbate-80

Requirements:

cGMP lab in good standing w/the FDA

View More


Description:

Materials laboratory needed for ASTM Testing for waterproofing of a membrane to ASTM C836, Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

Requirements:

ASTM C836

View More


Description:

Materials laboratory needed for ASTM testing for fire extinguisher compliance and safety testing to meet AHRI standards using the following guidelines:

- Purity (according to ASTM D6806)

- Acidity (according to AHRI 2008 Appendix C to 700-2014 Part ...

Requirements:

ASTM D8060-16
ASTM D6806
AHRI 2008 Appendix C to 700-2014 (Part 1, 2, 3)
FTIR spectrum analysis

Extinguishing agent 2BTP (2-Bromo-3,3,3-Trifluoro-1-Propene)

View More


Description:

Microbiology Laboratory needed for ASTM or ISO biodegradability testing to ISO14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide or ASTM...

Requirements:

Asia

View More


Description:

Nanomaterials laboratory needed for characterization testing of Zinc oxide nanoparticles using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and x ray diffraction (XRD).

Requirements:

Chennai location preferred
SEM TEM XRD

View More


Description:

Materials laboratory needed for corrosion testing of a chemical on boiler systems.

View More


Description:

Construction company needs Materials laboratory ASTM Testing for coal fly ash and raw or calcined natural pozzolan for use in concrete to ASTM C618 standard.

View More


Description:

Materials Laboratory needed for Corrosion testing of molybdenum disulfide according to AMS-M-7866A. Tests required are:

1.Corrosion resistance in accordance with MIL-STD-791
2.Steel and copper corrosion. Performed on steel panels conforming to MIL-S-7...

View More


Description:

Materials laboratory needed for ASTM Testing of porcelain tile: ASTM C738 lead and cadmium leachability

Requirements:

I do not want to use the Tile Council of North America.

View More


Description:

Healthcare company needs materials laboratory for failure investigation for durability and performance testing of vinyl flooring that is wearing.

Requirements:

Confidential - prefer contact via email

View More


Description:

Materials Science laboratory needed for solar reflectance index SRI Testing

Requirements:

SRI number for specific type of material

View More


Description:

Materials Laboratory needed for AASHTO testing of Architectural coating Material to Chloride penetration test (AASHTO T259, T260) Rapid chloride Permeability AASHTO T277 C02 Permeability
Coatings and Films
Materials laboratory for ASTM paint testing 1. ...

View More


Description:

Materials laboratory needed for plastics testing for hazotoxin determination from burning plastics.

Requirements:

Toxic emmision from melting plastic

View More


Description:

Materials laboratory needed for screw DIN Testing: 1) Screw Type: DIN7500 PE M3X8
Properties Class: 8.8
Surface protection: DIN EN ISO9227-NSS 360h
Cleanliness requirement: TV-02023-EN SKII (166mm2)

2) Screw type: DIN7500 PE M4X10
Properties Class:...

Requirements:

Fastener Cleanliness Requirement: TV-02023-EN SKII

View More


Description:

Materials laboratory needed for flame retardant testing on polypropylene woven fabric per standards DIN 4102 Class B 2, EN 13501, UL94VNT-2, NFPA701, FMVSS302.

View More


Description:

Materials Laboratory needed for optical testing of light diffuser sheet for Optical characteristics.

Requirements:

Optical characteristics of light diffuser sheet that is 4mm

View More


Description:

Materials Laboratory needed for ASTM Testing of Carbon Black as perASTM D3849 TEM determination of carbon black particle and aggregate size.

Requirements:

Testing required under 'Method A' as per ASTM D3849-2014.

View More


Description:

Materials laboratory needed for DIN fastener cleanliness testing to Screw Type: DIN7500 PE M3X8Properties Class: 8.8Surface protection: DIN EN ISO9227-NSS 360hCleanliness requirement: TV-02023-EN SKII (166mm2)2. Screw type: DIN7500 PE M4X10Properties Clas...

View More


Description:

Materials Laboratory needed for ASTM Flooring Testing to ASTM C609 for Light Reflectance Value of one of our products in various colors. Please specify the cost and turn-around.

Thanks

View More


Description:

Environmental Laboratory needed for OECD Biodegradability testing of surfactants to OECD 301 and/or OECD 310.

Requirements:

The 301 and 310 methodologies need to have local or international recognition.

View More


Description:

Polymer laboratory needed for EPA and ASTM materials testing of a O/W micro-emulsion matrixColor; Physical State; Odor; Explosive Properties; Oxidising Properties & Incompatibility; Flammability; pH; Non-Newtonian Fluid Dynamic Viscosity; Relative Densit...

Requirements:

Color; Physical State; Odor; Explosive Properties; Oxidising Properties & Incompatibility; Flammability; pH; Non-Newtonian Fluid Dynamic Viscosity; Relative Density; Storage Stability at 54 C for 14 days and ASTM G31 Corrosion Characteristics.

View More


Description:

Materials Laboratory needed for AASHTO testing of Architectural coating Material to
Chloride penetration test (AASHTO T259, T260)
Rapid chloride Permeability AASHTO T277
C02 Permeability test to consider as Anti carbonation coating material

Requirements:

We are looking for a test laboratory in South India

View More


Description:

Civil Engineering firm needs materials laboratory for concrete and banana fiber physical testing and SEM analysis:

Requirements:

1. Compressive Testing
2. Tensile testing of Banana Fiber Specimen and Concrete Sample also.
3. SEM Analysis(Not So much needed)

View More


Description:

Materials Science laboratory needed for ASTM shear stability testing of a sample using ASTM D 6278 standard.

Requirements:

ASTM D 6278

View More


Description:

LONG TERM TESTING. Materials laboratory needed for thermal testing of plastics for DIN EU ISO 4577 material.

Requirements:

Test temperature: 150 C
Duration test: 7 days

View More


Description:

Chemistry and advanced material laboratory needed for camphor analysis, and ice sheet quality assurance testing.

View More


Description:

Materials laboratory needed for polythene bag testing for oil resistance, ecopollution, and erosive characteristics in polythene bags.

View More


Description:

Materials laboratory for ASTM paint testing 1. Anti-carbonation: Test method EN-1062-7
2. Liquid water permeability: Test method EN-1062-7
3. Acid Resistance . 4. SRI (solar reflective index) ASTM C 1549-04
5. Chloride Ion penetration ASTM C 1202 -97
...

View More


Description:

Materials Laboratory needed for Plastics recycling conformity to IS 14534, Guidelines for Recycling of Plastics

Requirements:

IS 14534

View More


Description:

Materials Laboratory needed for Glass transmission testing for float glass

View More


Description:

Materials Laboratory needed for Adhesion tape testing for confirming Adhesiveness of tapes

Requirements:

Need Test result and Test Report as per standard format

View More


Description:

Materials laboratory needed for IEST and ASTM Clean Room Gloves Testing:
1 Tensile Strength ASTM D412
2 Ultimate Elongation ASTM D412
3 Surface Resistivity @50%RH ESD/EOS S11.11
4 MVTR
5 Shedding and extractables - IEST RP-CC005.4
LPC ? 0.5 ?m, Cl...

Requirements:

The IEST RP-CC005.4 test is our primary goal. We can have the gloves tested for items 1-4 elsewhere if you do not have the ability to perform these procedures. If you can, we would prefer utilizing one test facility.

View More


Description:

Major governmental facility needs materials laboratory to conduct ASTM gas analysis of PDMS based fluid per ASTM 3612

View More


Description:

Pharmaceutical company needs materials laboratory for ASTM Testing for Headspace and vapor pressure analysis to ASTM 2879

Requirements:

Headspace analysis
Vapor pressure ASTM 2879

View More


Description:

FDA GLP Preclinical Laboratory needed for PCR viral testing of two regenerative drug products and raw materials using Pharmacopeia methods:
1. HIV (anti-HIV (I/II),
2. Human T-Lymphotropic virus I and II
3. Cytomegalovirus
4. Epstein-Bar virus
5...

View More


Description:

Industrial firm needs materials laboratory for ASTM Testing of plant spray oil for ASTM D483 compliance

View More


Description:

Coatings company needs materials laboratory for DIN rubber coatings testing to DIN 53 504 Tensile strength test, DIN 53 507 Tearing resistant test and DIN 53 516 Abrasion resistant test for rubber sample

Requirements:

test must be performed under DIN protocol

View More


Description:

University needs urgent testing of building materials: Thermal conductivity measurement of thin insulating materials

View More


Description:

Urgent Need by Large UAE construction company for testing of foam materials per BS EN 13468 (Thermal insulating products for building equipment and industrial installations. Determination of trace quantities of water soluble chloride, fluoride, silicate, ...

Requirements:

please send me the quotation on above test method and lead time asap.

View More


Description:

Europe company needs materials laboratory for specialized military-use tape testing for reflective, effective- fluorescence, yellow color,fire resistant qualities per EN 20471:2013 and EN ISO 14116:2015 standards

Requirements:

We want to test in reflectivity ( EN 20471:2013) and flame retardancy (EN ISO 14116:2015),also the property of keeping its first parameters after 50 wash cycles at 60 ° C.
Please tell me the price and the time you need for the tests.
We need these tes...

View More


Description:

Italian cosmetic company needs consumer product safety laboratory for REACH compliance testing and toxicological tests for REACH registration, 1-10 tons of materials

Requirements:

REACH compliance

View More


Description:

Long term need for a toxicology laboratory in India to test urine samples for benzene. Industrial facility needs occupational hazardous materials evaluation to determine effectiveness of protective measures used by employees.

View More


Description:

Large steel design company needs materials laboratory for ASTM testing of various coating materials per ASTM standards including:ASTM 673, ASTM A153, ASTM B695, ASTM B571, and CTM 541

View More


Description:

Plastics packaging company needs materials laboratory to test the Intrinsic Viscosity (IV) of Polyethylen Terephtalate (PET) for a product.

View More


Description:

Metallurgical Laboratory needed for XRD on metal samples to solid (cast) form with high ferroalloy content to determine the carbides and alloy phases that
gave my hardfacing materials their hardness.

Requirements:

My interest are to determine the carbides and alloy phases that
gave my hardfacing materials their hardness.

View More


Description:

Materials Laboratory needed for 3000 hour accelerated aging testing of plastic connector made from polyamide 66+ 30% glass fiber, in order to see the status after 3000 hours of functioning for our plastic item ?Connector?.

View More


Description:

Geology laboratory needed for construction materials performance testing of rock used for dwelling sidings if it is good for Alberta weather

Requirements:

- test for accommodation for Alberta weather

View More


Description:

Company needs materials laboratory for Failure Analysis Testing of welded seam strength in air supported structures made out PVDF 28oz vinyl fabric. The seams of the fabric are RF welded together to create the structure and we have been having some issue...

Requirements:

Not sure I just need someone to help figure out if we have a material issue or equipment issue one thing I would like to know is our fabric really what our vendor says it is.
But I would be happy to answer any additional questions anyone may have.

View More


Description:

Sports surfacing company needs Construction materials laboratory for ISO plastics testing UV testing as per ISO test method ISO 4892-2:2660

Requirements:

Test conditions: Test Cycle: ISO 4892-2:2660 cycle 1 Irradiance (0.51 ± 0.02) W/(m2nm) @ 340nm 102 min light at (65 ± 3) ?C BST, (50 ± 10)% RH 18 min light and water spray Filter: Daylight Exposure period: 1000 hrs

View More


Description:

Manufacturer of rubber parts needs materials laboratory for UL certification testing for a gasket.

View More


Description:

ISO Accredited USA and European Biophysical Laboratory Needed for biomaterials testing of dental implant material: to ISO 14801- Dynamic fatigue test for endosseous dental implants

Requirements:

ISO 14801- Dynamic fatigue test for endosseous dental implants

View More


Description:

Disinfectant Materials Compliance Test: Two (2) peracetic acid based disinfection materials for STAAT level II compliance.


Requirements:

Since the complete destruction of all microorganisms is difficult to establish, sterilization of medical and surgical instruments is generally expressed as a 6 log10 reduction of a specified microorganism, corresponding to a one millionth (0.000001) survi...

View More


Description:

Biomedical company needs biomaterials laboratory for ISO Testing of resins cements to ISO 5833:2002 specifications, Implants for surgery -- Acrylic resin cements

Requirements:

ISO 5833:2002 specifications, Implants for surgery -- Acrylic resin cements

View More


Description:

Large company needs Laboratory for coating testing to ASTM E2178,Standard Test Method for Air Permeance of Building Materials

View More


Description:

ISO 17025 accredited laboratory needed for ISO Radioactivity testing of dental materials by the dental standards ISO 6872 by gamma spectroscopy.

Requirements:

Laboratory will need to have ISO 17025 accreditation to determine the activity concentration of 238U by neutron activation or gamma spectroscopy. Note: those with gamma spectroscopy techniques should be used to screen for adulteration.

View More


Description:

Large energy corporation needed materials laboratory for Corrosive Sulfur Test according to DIN 51353, Testing of insulating oils; detection of corrosive sulfur; silber strip test

View More


Description:

Laboratory needed for SAE Testing to SAE J1684, Test Method for Evaluating the Electrochemical Resistance of Coolant System Hoses and Materials

Requirements:

Needs to be in Detroit area. We would also like to send representatives to document and observe the testing.

View More


Description:

Materials laboratory needed for haze and luminous transmittance tests for glass or plastics

View More


Description:

Materials laboratory needed for packaging testing of packaging products at different conditions(such as Microwaving or Freezing). Please provide quote.

View More


Description:

Large Company needs Materials Laboratory for footwear testing to ASTM D471 Standard Test Method to evaluate the comparative ability of Footwear samples to withstand the effect of liquids.

View More


Description:

Materials laboratory needed for crack testing in plastic parts

View More


Description:

ASTM Testing of aluminum honeycombs to multiple ASTM standards: .ASTM C273 - Standard Test Method for Shear Properties of Sandwich Core MaterialsASTM C365 - Standard Test Method for Flatwise Compressive Properties of Sandwich CoresASTM C297 - Standard Tes...

View More


Description:

Materials laboratory needed for ASTM Testing of composite construction materials to astm e 84, Standard Test Method for Surface Burning Characteristics of Building Materials

View More


Description:

Materials laboratory needed for classification testing of recycled in order to determine who can buy it from us.

View More


Description:

Materials laboratory needed for IEC and ASTM Testing of insulators (several tests) : ASTM C177: Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded hot-plate apparatus. (We only have the...

Requirements:

-

View More


Description:

Materials laboratory needed for NATO coatings testing of chemical agent resistant coating (CARC) to North Atlantic Treaty Organization NATO AEP 64 standard fo Performance Requirements for Paint Systems Resistant to Chemical Agents and Decontaminants, for...

View More


Description:

FDA GMP cosmetics laboratory needed for formulation of lotion using 100 present natural materials ingredients: ghee (clarified butter) water, rose water for smell, and Indian Jasmine essential oil.

Requirements:

FDA approval

View More


Description:

Electrical laboratory needed for the Determination of Dielectric Permittivity and Loss tangent of Photoresist materials. Frequency range is 1 GHz to 40 GHz

Requirements:

Frequency range is 1 GHz to 40 GHz

View More


Description:

Materials laboratory needed for ASTM plastic film testing of Natural fibers enriched plastic films for packaging application

View More


Description:

Materials Laboratory needed for FAA aircraft carpet testing: Fire retardant testing to FAR 25.853, Flammability Requirements for Aircraft Seat Cushions

Requirements:

FAR 25.853

View More


Description:

Materials laboratory needed for biodegradability testing and plastic content testing of 2 products made of corn starch which is claimed as biodegradable.

View More


Description:

Materials Laboratory needed for ASTM Testing of Processed woodcore Panel Board assemblies (using core material such as MDF / Particle Boards, Laminates, Edge Banding etc etc ).We are looking for Test Certification for ?ASTM E84-06a? for surface burning ch...

View More


Description:

Materials laboratory needed for ASTM Testing: Fire Point Determination using ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

View More


Description:

Materials Laboratory needed for ANSI Testing of 
Latex Coated Multipurpose Work Glove to be ANSI rated for Cut and Abrasion Resistance as demonstrated by an independent laboratory testing report (if certified to ANSI/ISEA-2016, Cut Level A2 and Abrasion ...

View More


Description:

MATERIALS LABORATORY NEEDED FOR ASTM TESTING OF HOOK AND EYE TO ASTM 5169 TESTING OF SHEAR STRENGTH OF HOOK AND LOOP
ASTM 5170 PEEL STRENGTH OF HOOK AND LOOP FASTENERS

View More


Description:

Large company needs materials laboratory needed for accelerated aging study on thermoset material with for yellowing index and light transmitting to identify the relationship between the hours accelerated test and the years of outdoor exposure.Please, se...

View More


Description:

Materials Laboratory needed for Material characterization of metal with Polymer thinfilm
- Mechanical properties characterization of flat thin steel (0.1 x 5 x 30mm)
- Mechanical properties characterization of bent thin steel (0.1 x 5 x 30mm) down centr...

View More


Description:

Nanotechnology company needs materials laboratory for conducting studies on nanoparticles effect on the base polymers. polymer composite testing on various polymers, including PP, PE, Nylon, TPU, and others. In particular, we are interested to learn the m...

Requirements:

The lab must be equipped to carry out the following tests on polymer samples:
Tensile Strength,
Young's Modulus,
Gas Permeability,
Thermal Conductivity,
Electrical Conductivity,
Impact Strength,
Creep,
UV Irradiation,
Colorant,
Melt Flow Index, ...

View More


Description:

Materials laboratory needed for propylene testing for the Purity of Liquid propylene

Requirements:

The purity of liquid propylene and maybe some other products in the propylene

View More


Description:

LONG-TERM TESTING Packaging Laboratory needed for packaging testing of In flexible packing materials like double laminated , triple laminated & other flexible packaging material for:
Flex crush resistance
Water vapor transmission rate
Oxygen transmis...

View More


Description:

Large apparel manufacturer needs packaging laboratory for packaging boxes comparison study to ASTM 5264 Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester

Requirements:

ASTM D 5264 comparison between the two boxes

View More


Description:

Materials laboratory needed for surgical gowns testing
- NFPA Standards - Standards for the use of Inhalation Anesthetics.

- ASTM 1670, Standard Test Method for Resistance of Protective Clothing Materials to Synthetic Blood.

- ASTM 1671 Test Metho...

View More


Description:

Construction materials company needs toxicology laboratory for toxicity and carcinogenicity testing of High pressure laminated sheet

Requirements:

non toxic
non carcinogenic

View More


Description:

LONG TERM TESTING Materials Laboratory needed for Polyamide Tube testing to prove compliance with DIN73378, DIN74324-1 and SAEJ844 Many different tests covering material mechanical properties, hydrostatic burst pressure, impact testing, moisture absorptio...

View More


Description:

Analytical chemistry laboratory needed for Certificate of Analysis (c of A) chemical composition testing and analysis of raw materials

Requirements:

Chemical composition confirmation.
If possible provide a Certificate of Analysis (C of A)

View More


Description:

Materials laboratory needed for sunlight insulation efficacy testing of insulation fabric with Polyethylene woven material, without foam nor air bubble. Insulation efficacy of our fabric is related to certain ray from the sun.

View More


Description:

Construction Buildings Materials company needed for ANSI or ISO adhesive testing to ANSI A118 or ISO 13007
Test adhesive tensile strength at normal temperature and water immersion *Determination of tensile adhesion strength - C
*Determination of open t...

Requirements:

ANSI A118 or ISO 1300

*Determination of tensile adhesion strength - C
*Determination of open time
* Determination of slip

View More


Description:

FDA GMP contract testing laboratory needed for full USP monograph testing on the following medical grade gases: N2, O2, CO2 as part of Raw Materials vendor qualification program.

View More


Description:

Materials laboratory needed for Field Study on concrete door for soiling ability

Requirements:

confidential

View More


Description:

Materials laboratory needed for proficiency testing programme for Linear Thermal Shrinkage of Plastics as per ASTM D 1204.

View More


Description:

Materials laboratory needed for thermal conductivity testing of thermal paste used in computers, and we need to measure the actual thermal conductivity for the sale of goods. Currently developed several modifications to the calculated thermal grease therm...

View More


Description:

Materials laboratory needed for analysis of particulate formation in natural oil wood finishes. We are having some particulates forming that we need to determine what is happening and ultimately how to prevent this in our manufacturing process.

Requirements:

To be able to test 4 of our finishes and give an analysis of the make up- based on the ingredients we used and tell us what else is existing in the oil, chemical reactions taking place, etc.

View More


Description:

Materials laboratory needed for DIN and ASTM Testing of thermal insulations foam board. Testing to To meet out the requirement of
Density: DIN 53420(ASTM D 1622
Thermal conductivity :DIN 52612 OR 52616
Compressive strength :DIN 53421 (ASTM D 1621
Wat...

Requirements:

To meet out the requirement of
Density: DIN 53420(ASTM D 1622
Thermal conductivity :DIN 52612 OR 52616
Compressive strength :DIN 53421 (ASTM D 1621
Water vapour diffusion resistance factor: DIN 52615
Water vapour permeability : ASTM C355
Heat soaki...

View More


Description:

Large petroleum company needs materials laboratory for ASTM Testing of terephthalic acid to ASTM methods

ASTM D8031-16 ? Acid number for TA by potentiometric titration
ASTM D1209-05 ? Color of clear liquids (Pt- Cobalt Scale)

Please provide

- ...

View More


Description:

Materials laboratory needed for sunlight insulation efficacy testing of insulation fabric with PE woven material, without foam nor air bubble. Insulation efficacy of our fabric is related to certain ray from the sun.

View More


Description:

FDA compliant food laboratory needed for characterization of a natural extract (including microbiological analysis and analytical support) with the goal of filing a petition of new color additive with the FDA on 5 different batches of materials for total ...

Requirements:

Methods must be FDA compliant

View More


Description:

Large Corporation needs Materials Laboratory for polymer testing: OH# titrations based on ASTM D4274, Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols

Requirements:

Confidential

View More


Description:

Materials laboratory needed for ASTM Testing of novel paint composition of anti repellent activity.

Requirements:

ASTM std tests

View More


Description:

Engineering firm needs Materials Laboratory for ASTM Testing: Sound Transmission Class Test for Concrete Masonry Blocks in accordance with ASTM E90 & ASTM E423.
Please provide Quotation.

Requirements:

Sound transmission class Test

View More


Description:

Medical Device Company needs medical technology laboratory for packaging/ product /development of developing a disposable medical cable assembly that will require sterilization. ABS plastic housing for connectors
Silicone vs PVC for cable assembly I have...

Requirements:


View More


Description:

LONG-TERM TESTING Large Medical Device Company needs materials laboratory for RAL-GZ 387/1 compression testing for fabric

View More


Description:

Europe materials laboratory needed for ASTM and DIN Testing of lubricant oils to Copper Corrosion ASTM D 130/12 Aluminium Corrosion DIN EN ISO 6270-2 Ash content: DIN EN ISO 6245 Flock Point DIN 51351

View More


Description:

Materials laboratory needed for ASTM Testing to measure Hiding power of coated aluminum powder to ASTM D6441,Standard Test Methods for Measuring the Hiding Power of Powder Coatings, ASTM D 3451, ASTM D 3451, Standard Guide for Testing Coating Powders and...

Requirements:

ASTM D6441, ASTM D 3451

View More


Description:

Technology laboratory needed for materials testing to develop the Flow Characteristic Chart (Pressure Drop vs Flowrate) for product.
Flow rate ranges from 0 to 760 lpm

View More


Description:

Materials laboratory needed for Permeation testing on elastomers to ISO 2782, Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 1: Differential-pressure methods

Requirements:

Just need to meet the test method requirements.

View More


Description:

LONG-TERM TESTING ISO certified laboratory needed for identity testing on dietary supplement raw materials, including animal and bee products (royal jelly, bee pollen, bee propolis).

Requirements:

Preferred labs will be ISO certified

View More


Description:

Materials laboratory needed for rheology testing of adhesive used in pharmaceuticals. Please provide quote.

View More


Description:

Large automotive supplier needs materials laboratory for physical testing on painted plastic such as the DuPont Impact test and Traverse Abrasion plus many more.

View More


Description:

Materials Laboratory needed for engineering evaluation of a wall coating

View More


Description:

USA Materials Laboratory needed for ANSI Testing for light transmission (A light) to ANSIZ26.1-1996, Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard

Requirements:

ANSIZ26.1-1996, Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard

View More


Description:

Materials laboratory needed for certification testing for fire resistance.

View More


Description:

Third party certification laboratory needed for cable compliance testing to New York City Transit Specification: NYCT R211 Technical Specification - Section 19 Materials, Processes and Workmanship.

Requirements:

NYCT R211 Technical Specification - Section 19 Materials, Processes and Workmanship.

View More


Description:

India materials laboratory needed for diaper testing:
1- measuring absorption under load(AUL)in diaper
2-the analysis method for monitoring distribution of super absorbent polymers in diaper

View More


Description:

Materials laboratory needed for ASTM proficiency testing for Linear Thermal Shrinkage of Plastics as per ASTM D 1204, Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

View More


Description:

Resin Manufacturer needs materials laboratory for adhesive scientific research study

View More


Description:

Government Agency needs NABL certified materials laboratory needed for Tests on silica filler (commonly used in rubber products)

1) CTAB
2) DBP Structure
3) Pour Volume Distribution
4) Pour Size Distribution
5) Zeta Potential
6) Particle Size Dist...

Requirements:

lab must be NABL certified

View More


Description:

Materials science laboratory needed for thermal impedance and thermal conductivity study at different temperature

View More


Description:

Materials Laboratory needed to measure the optical transmittance of a ceramic thin film in the range 200 - 800nm.

View More


Description:

LONG-TERM TESTING Materials laboratory needed for shear strength testing of an adhesive as per Federal Specification MMM-A-181D.Shear strength by tension loading340 lbs/in2 dry joint test per ASTM D906.

Requirements:

Federal Specification MMM-A-181D and Shear strength by tension loading 340 lbs/in2 dry joint test per ASTM D906. If you need a copy of MMM-A-181D please let me know.

View More


Description:

MATERIALS LABORATORY NEEDED FOR EPOXY TESTING TO SPECIFICATION REQUIRMENTS

View More


Description:

Materials laboratory needed for ASTM Testing of Automotive adhesive and sealent for tensile properties to ASTM D 638.
1) Percent Elongation at Break
2) Modulus of Elasticity (Young's Modulus)

Requirements:

(ASTM D 638), 3.0 +/- 0.5 mm thick, material cure for 30 minutes at 180 °C adhesive temperature, condition at 23 +/- 2 °C for 24 h, test at 23 +/- 2 °C, Type I specimen, W = 10 mm, G = 50 mm, 5 mm/min +/- 10 %)

View More


Description:

Aerospace Materials Laboratory Measurement of Attrition Index of Limestone to ASTM D5757-00, Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets

Requirements:

preferably follows

View More


Description:

LONG-TERM TESTING FDA GMP compliant Laboratory needed for stability, microbial and identity testing of raw materials for dietary supplements

Requirements:

Should be GMP compliant

View More


Description:

Petroleum laboratory needed for Texas Department of Transportation Testing to Tex-501-C, TEST METHODS FOR VARIOUS BITUMINOUS MATERIALS - Test for water content, % by mass.

Requirements:

Tex-501-C, TEST METHODS FOR VARIOUS BITUMINOUS MATERIALS

View More


Description:

Automotive manufacturer needs Materials Laboratory for DIN Testing:Torsion pendulum test to DIN EN ISO 6721-2A, Plastics -- Determination of dynamic mechanical properties

Requirements:

Temp range -50c to 180c

View More


Description:

LONG-TERM TESTING Materials Laboratory needed for Biodegradation testing according to ISO14855, Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon diox...

Requirements:

ISO14855, Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide

View More


Description:

Materials laboratory needed for ASTM Chemical degradation and permeation testing as per ASTM 739-12 for Industrial rubber gloves for 84 chemicals

Requirements:

Testing with alList of upto 84 chemicals

View More


Description:

Materials Laboratory needed for SAE Testing to SAE J 883 Test Method for Determining dimension atability of Automotive textiles materials

View More


Description:

Materials Laboratory needed for ASTM Testing of linens to ASTM F739-99a/12e1 Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact of chemotherapy drugs

Requirements:

chemotherapy drugs

View More


Description:

Materials Laboratory for soda lime silicate float glas and silver mirror testing for Radiation properties, Thermal Resistance and thickness of glass as per EN 572-9 standard. And silver mirror testing as per ASTM standard.

View More


Description:

Asia Materials laboratory needed for ASTM Testing to ASTM F1671, Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System and ASTM F903, ...

Requirements:

ASTM F1671, Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System and ASTM F903, Standard Test Method for Resistance of Materials Use...

View More


Description:

Materials laboratory needed for polyol characterization testing:
Hydroxyl number, mg KOH/gm ASTM D1638 or ASTM D 4274
Primary Hydroxyl Content ASTM D 4273
Water, weight % maximum ASTM...

Requirements:

Need a quote from a lab that can do the above described testing.

View More


Description:

Europe Materials Laboratory needed for Paint film performance tests on mild steel panels
Sr No Test
1 Salt Spray Test (504 hours)
2 Humidity Resistance (504 hours)
3 Pencil hardness
4 Dry Adhesion
5 Elongation
6 Impact Resistance (direct)
7 Impact...

View More


Description:

Materials Laboratory needed for Elemental analysis: Carbon and hydrogen (C H analysis), C% and H%

Requirements:

none

View More


Description:

Materials laboratory needed for ASTM Dielectric Testing: Dielectric Strength and Water Absorption (RT 24h) to ASTM D149, Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid. The material is 30% glass filled Peek.
Wha...

Requirements:

ASTM D149 I believe

View More


Description:

Materials laboratory needed for ASTM Testing for compatiability of plasticizers to ASTM D3291 Testing (Standard Practice for Compatibility of Plasticizers...).Lab would need to accept samples of the plasticizer, and then formulate into the PVC, then perfo...

View More


Description:

Materials laboratory needed for crazing resistance testing for a set of adhesives which are going to be pasted on a PC, PVC and SAN substrate.

View More


Description:

Middle East Proficiency Laboratory needed for ACi, ASTM construction materials proficiency testing for soil, aggregate, concrete, bitumen, water and for

Requirements:

ASTM , ACi,

View More


Description:

Materials laboratory needed for paints testing for accelerated aging, hiding power, the spatter resistance, the scrub resistance, the washability, the sag resistance, the blocking resistance, the hiding change, the heat gain, the viscosity, the whiteness...

Requirements:

There are no specific requirements.

View More


Description:

Materials laboratory needed for ASTM or IEC Dielectric Constant Testing for Quench Water, Gasoline, Steam Condensate, Hydrocarbon, and other refineries/petrochemical product.

Requirements:

ASTM, IEC, or any other international standard for this testing

View More


Description:

Large corporation needs materials laboratory needed for UV stability testing of HDPE: orange colored HDPE sheath in which we have to check for UV stability of that sheath & life of sheat

Requirements:

1.Ratios of HDPE Vs. UV master batches
2.Absorbance
3. Retension of mechanical properties with UV exposure

View More


Description:

URGENT Materials Laboratory needed for ASTM Testing of Petroleum to ASTM D2766 Standard Test Method for Specific Heat of Liquids and Solids. at 60, 70, 85, 100, 115, 170, and 190 °C

Requirements:

Rapid turn-around - 24 hour if possible

View More


Description:

Materials Laboratory needed for ANSI compliance testing of safety spectacles comply with ANSI/ISEA Z87.1:2015 standards for high-impact resistance. Preferably Asia-based.

Requirements:

Use testing as described in guidelines for high-impact resistance. If it fails, try and test standards for basic requirements.
Please keep my name and company confidential for the request.

View More


Description:

Large oil company needs Materials Laboratory for ASTM Testing of Polyurea Electric Motor Grease that requires the ASTM D3336, High Temperature Bearing Test.

Requirements:

In need of lab to run the ASTM D3336.

View More


Description:

Materials Laboratory needed for ASTM Testing of textiles to ASTM D4157, Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)

View More


Description:

Large corporation needs materials laboratory for polymr analysis: degree of polymerization of cotton fiber by Gel permeation chromatography GPC (with detailed distribution of MW)

View More


Description:

Physical Laboratory needed for Surface Burning Characteristics of Building Materials as per ASTM E84 - 16, Standard Test Method for Surface Burning Characteristics of Building Materials

View More


Description:

Physical Laboratory needed for flammability pre-testing of carbon fibre samples to CS 25.853 Flammability Requirements for Aircraft Seat Cushions Appendix F, Part I, (a)(1)(ii) (i.e. 12sec vertical burn with 305mm x 70mm samples). The objective is to try...

Requirements:

Unofficial test, so no formal test report required. Also, maybe just one sample of each material may be submitted.

View More


Description:

Importer of chemical raw materials needs analytical chemistry laboratory for preservative testing for levels of active ingredients Quaternary ammonium compounds, benzyl-c8-18-alkyldimethyl, chlorides, ethanol. type preservative products.

Requirements:

for perservative

View More


Description:

Plastics Materials Laboratory needed for erucamide content in plastics product

View More


Description:

Microbiology laboratory needed for Bioburden testing for pharmaceutical raw materials and finished product

View More


Description:

Pharmaceutical analytical chemistry laboratory needed for USP AA metals testing for raw materials

Requirements:

Must be usp compliant

View More


Description:

LONG-TERM TESTING Materials laboratory needed for rheology testing of bio sealant to find its gel time(i.e time required for the substance to change from liquid to gel).

Requirements:

we need a rheometer that checks within the range of 5 seconds.

View More


Description:

University Researcher needs materials laboratory for rheological testing of EPDM rubber compound which include viscosity vs shear rate ,dynamic modulus loss and storage moduli and tan delta. I need these data for material characterizing and extract materi...

Requirements:

my field of interest is extrusion of rubber modelling . any information relating to identify the parameter include dynamic analysis will be helpful to my project .

View More


Description:

Materials Laboratory needed for BHT free testing Solvent Extraction/ analysis by GC-MS of LLDPE Stretch Wrap film. Please send quotation and accreditation scope available.

Requirements:


View More


Description:

Materials Laboratory needed for safety gloves testing to ASTM F2961 - Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter

View More


Description:

Materials Laboratory needed for ASTM Extractable testing in gloves such as residual accelerators, NVR as per ASTM standards.

View More


Description:

Materials laboratory needed for AFNOR AC T51- 808:2012: Assessment of Oxobiodegradability of Polyolefinic Materials in the form of Films (Abiotic) only.

View More


Description:

Materials Laboratory needed for hot acid (sulfuric) resistance testing in textile fibers

Requirements:

Adherence to specific test methodology

View More


Description:

Materials laboratory needed for paints testing for accelerated aging, hiding power, the spatter resistance, the scrub resistance, the washability, the sag resistance, the blocking resistance, the hiding change, the heat gain, the viscosity, the whiteness...

Requirements:

There are no specific requirements.

View More


Description:

Medical Device Manufacturer needs medical device laboratory for sterilization validation of device sterilization process.
1.¬ ¬Sterilization method: ¬ We will supply instr¬uctions for a method ¬with step by step ins-tructions and we need¬ to get t...

View More


Description:

Materials Laboratory needed for biomechanical / biophysical testing for medical device burs:
¬Mechanical force of d¬evices test (compress¬ion, Torsion)
Biomechanical property of dental burs is important for safety usage so test should assure tor...

Requirements:

¬

View More


Description:

Oilfields company needs Materials laboratory for Chemical Testing and Mechanical Testing for polyurethane roller material

Requirements:

What is the Coupon size needs to required to performed Machnical Test

View More


Description:

Materials laboratory needed for ANSI testing or cement to ANSI Standards: ANSI A118.1 Standard Dry-Set Cement Mortar
ANSI A118.4 Modified Dry Set Cement Mortar
ANSI A118.15 Improved Modified Dry-Set Cement Mortar

Requirements:

None

View More


Description:

Materials laboratory needed for independent third party testing of laminate flooring for

1) Test for ortho phthalate plasticizers

2) Following tests with relevant ASTM test parameters (for vinyl flooring)
- Stain and chemical test
- Static load l...

Requirements:

Awaiting your feedback on the standards you are able to do in your labs and for the subsequent price quotation. We would like to initiate this process as soon as possible.

View More


Description:

FDA cGMP Pharmaceutical analytical chemistry laboratory needed for identity testing for the following drug and excipient materials that may be used in production of clinical grade biological drug products:
Pluronic F-68
1X Phosphate Buffer Saline
L-Gl...

Requirements:

Please list of the material you can provide testing and the methods that will be used.

View More


Description:

Aerospace company needs materials laboratory for investigation study of delamination problem with decor laminating application.by coupled TGA-MS (Thermalgravimetric Analysis and Mass Spectrometry) to detect if offgassing occurs. We often see delamination...

Requirements:

We would like to know if you have coupled TGA-MS (Thermalgravimetric Analysis and Mass Spectrometry) to detect if offgassing occurs. Any other suggestions will be appreciated!

View More


Description:

Materials Laboratory needed for coatings research and devlopment to dissolve a metalorganic liquid into anhydrous toluene and seal them into a provided 60L bubbler. This needs to happen under inert atmosphere

Requirements:

Glove box/inert atmosphere

View More


Description:

Larg Construction Building Materials company needs certification laboratory for ANSI Testing of tile adhesives & grout accoding to ANSI standards.
FK10W Cementitious tile adhesive C1T EN 12004
GM1 Cementitious tile adhesive C2T EN 12004
FLS1000 Cemen...

View More


Description:

Materials laboratory needed to measure the solar reflectance index (SRI) test on a water based thermal coating . Please provide location of testing, the sample qty required, and cost per sample

View More


Description:

Consumer Products laboratory needed for performance testing of horse boot inner liner material for heat and water evaporation in comparison to industry standard materials.

Requirements:

Would like to try and recreate as closely as possible field results (same conditions as would occur on a working horse.)

View More


Description:

LEGAL Materials laboratory needed for measuring surface of a flexible thin film material to characterize a few topographical features such as surface roughness Ra.

Contact mode AFM testing in ambient;
non-contact optical interferometric profilometer...

Requirements:

Contact mode AFM testing in ambient;
non-contact optical interferometric profilometer such as Wyko profilometer.

Capable to scan 200x200 um area of sample, with resolution down to 0.5 nm roughness for smoothest materials.

View More


Description:

Materials Laboratory needed to Measure 3D surface profile of a very smooth service with Wyko Optical Interferometer

View More


Description:

Materials Laboratory needed for ASTM tensile testing to ASTM E8.,Standard Test Methods for Tension Testing of Metallic Materials. Flat tensile specimen will need to be machined according to ASTM E8 from 6061-T651 slug that is 2.75 in diameter and 8 in len...

View More


Description:

Materials Laboratory needed for Testing for plastics testing of LDPE / HDPE plastic bags:
1. Oxygen Transmission Rate (OTR)
2. Water Vapor Trasmission Rate (WVTR)

View More


Description:

Materials laboratory needed for Optical Testing of epoxy samples for fluorescence, transmission, and reflectance

Requirements:

Report of results required

View More


Description:

Materials Laboratory needed for materials characterization testing of solid surface acrylic / polyester resin based composite material used in manufacture of kitchen and bathroom countertops. iIncluding general, thermal and mechanical properties and chem...

View More


Description:

Materials Laboratory needed for ASTM Testing: Weathering Testing to ASTM G-154 , QUV Exposure testing on 40 - 50 samples 4 X 4# each, 3,000 hours

Requirements:

pull samples each 500 hours of exposure and send them to our facility

View More


Description:

Materials laboratory needed for comparison study testing of Box tapes for smell, contaminants, strength and durability.

Requirements:

need to be able to publish results of our product Vs. samples A-C above.

View More


Description:

START-UP Personalcare company needs Materials laboratory for Product Safety and GMO Testing of materials in tampons to understand if material is GMO (if cotton) vs organic, and presence of toxins or pesticides.

Requirements:

Would like my information and results to remain confidential.

View More


Description:

Flooring Company needs materials laboratory for ANSI Testing to ANSI 137.1 Dynamic Coefficient of Friction

Requirements:

ANSI 137.1 Dynamic Coefficient of Friction

View More


Description:

Large corporation needs materials laboratory for physical testing: Peel adhesions in cold temperatures. 90° and 180° peels on various substrates. We would supply test substrates.

Requirements:

90° and 180° peels on various substrates. We would supply test substrates.

View More


Description:

Materials laboratory needed for plastics testing of corrugated polypropylene layerpad. abrasion test in accordance to DIN 53754 TESTING OF PLASTICS; DETERMINATION OF ABRASION, ABRASIVE DISK METHOD.

Requirements:

DIN 53754 TESTING OF PLASTICS; DETERMINATION OF ABRASION, ABRASIVE DISK METHOD

View More


Description:

Materials Laboratory needed for Biodegradation testing of Plastics as per ASTM D5511, Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions and ASTM 5526, Standard Test Method f...

Requirements:

ASTM D5511, Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM 5526, Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerat...

View More


Description:

NABL approved materials laboratory needed for wooden material testing

View More


Description:

Laboratory needed for ASTM tensile testing to ASTM E8.,Standard Test Methods for Tension Testing of Metallic Materials Flat tensile specimen will need to be machined according to ASTM E8 from 6061-T651 slug that is 2.75 in diameter and 8 in length. Mat...

View More


Description:

Materials Laboratory needed for ASTM Testing: Stress corrosion Testing on titanium according to ASTM F945.
Candidate solution is the lubricant
Test specimens shall be made of AMS 4911 material. The traceability of the specimen shall be done with a met...

View More


Description:

Materials laboratory needed for Precision surface metrology testing of the inner surface of ring-like metal parts. Contact (precision spindle) measurements for the inner surface and potentially optical profilometry for the outer surface.

View More


Description:

Third-party laboratory needed for biodegradability testing of plastic fishing baits for fishing potentially to ASTM D6691Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Co...

Requirements:

ASTM D6691

View More


Description:

Materials laboratory needed for ASTM and MIL Standard testing of TTVF adhesive tapes. These tapes are getting expired. So these tapes need to be tested as per ASTM D1000-70a to extend the Shelf life. Please provide Quote for the same.

Requirements:

Test as per MIL-M-87958 and ASTM D1000-70a

View More


Description:

LONG-TERM TESTING Large food company needs laboratory for comprehensive analytical & microbiological testing of bulk product, and requisite raw materials including both standardized (e.g. USP) and vendor-specified testing methods, as applicable

Requirements:

both standardized (e.g. USP) and vendor-specified testing methods, as applicable

View More


Description:

Biomaterials laboratory needed for in-vitro surgical sealant testing 1. Burst test of surgical sealant (2-PEGs) as per ASTM F2392.
2. Gel Time test - surgical sealant (2-PEGs)
3. Swell Test - surgical sealant (2-PEGs)
5. Gel Mixing test - surgical sea...

Requirements:

All In Vitro test conditions.

View More


Description:

Materials laboratory needed for rubber testing for Hexane extract, Thermal analysis (DSC, DMA, TGA) , EDX analysis (REM) of the material for heavy metals (Pb, Cr-VI, Hg, Cd), TDS-GCMS analysis of the material for softeners, Extractable matter (extration a...

View More


Description:

Healthcare practioner needs medicinal chemistry laboratory for herbal waters testing for chemical composition including for vitamins, minerals. Herbal waters have been extracted from plant materials via freeze drying

View More


Description:

Materials laboratory needed for PSTC Certification Testing of Pressure Sensitive Adhesive Tape Testing - Peel Adhesion, Tack, Static Shear

Requirements:

Experience testing Pressure Sensitive Adhesive Tape.
certified by The Pressure Sensitive Tape Council (PSTC).

View More


Description:

Pharmaceutical analytical chemistry laboratory needed for quality control analytical testing on various raw materials including purity, adulterants, contaminants, buffing agents, heavy metals, etc.

View More


Description:

Materials Laboratory needed for Atomic Absorption analysis for quantification of Ag+ ions released into an aqueous environment. Please provide the cost on a per sample basis.

View More


Description:

Analytical Chemistry Laboratory needed for aloe vera testing. Quantify Acemannan by O-Acetyl method in samples of Aloe Vera raw materials in liquid and powder forms.

View More


Description:

Polymer laboratory needed to provide quotation for analysis of polypropylene resins intended for shelf life studies. Polypropylene is a thermoplastic mainly used in packaging materials/goods.

View More


Description:

URGENT Materials Laboratory needed for batch release testing: Dynamic Surface Tension testing on a water-based inkjet ink.

Requirements:

Turnaround of <1 week; we have a batch that needs to be released, but our DST instrument malfunctioned and we are trying to still meet the deadline.

View More


Description:

Materials Laboratory needed for fire and explosion testing of a plastics powder

View More


Description:

Middle east laboratory needed for construction materials testing

View More


Description:

Automotive laboratory needed for ASTM Testing and testing to norm MS211-47 Type A2 (KIA/HIUNDAI):
ASTM D792, Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement , density, relative density, specific grav...

Requirements:

ASTM D792,
ASTM D638,
ASTM D790,
ASTM D256,
ASTM D648,
ASTM D785,
ASTM D3418,
ASTM D2584,

View More


Description:

Materials laboratory needed to test a 2 component thin set mortar; a polymer modified stone adhesive to adhere thin stone in accordance to ANSI 118.4 and ANSI 118.11.

View More


Description:

Pharmaceutical analytical chemisitry laboratory needed forUSP raw material testing: Atomic Absorption testing per USP for Talc and Manegsium Stearate raw materials.

Requirements:

Testing should be executed following current USP.

View More


Description:

Materials laboratory needed for physical testing: Acron abrasion testing of rubber or acron wear testing

View More


Description:

Materials laboratory needed for biodegradability testing to determine the biodegradation of MIREL plastic

View More


Description:

Materials laboratory needed for ASTM D7419-13 testing Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection

View More


Description:

Materials Laboratory needed for peel testing of non-woven, laminated material

Requirements:

looking for laboratory in Southeast Asia, Singapore, Hong Kong, China region

View More


Description:

Materials laboratory needed for testing to test the effects of an additive to basic hot melt formulations

View More


Description:

Polymer Materials laboratory needed to conduct isothermal viscosity testing of sealants and estimate working life at various temperatures. I know this cannot done by regular Brookefield viscometers.
At 75 F for 2 hours
at 85 F for 2 hours
100 F for tw...

Requirements:

Test Matrix - Characterization of Working Life of Polysulfide and Sealants by Isothermal Viscosity Testing

Material 70 F for 2 Hrs. 85 F for 2 Hrs. 100 F for 2 Hrs. 120 F for 2 Hrs. 135 F for 2 Hrs. 150 F for 2 Hrs.

Sealant 1 2 2 ...

View More


Description:

Biotechnology company needs genetics laboratory for DNA Testing by PCR analysis to determine if materials are of animal origin

Requirements:

Please suggest any testing laboratory which serves our purpose.

View More


Description:

Materials laboratory needed for biodegradability testing to determine the biodegradation of organic solvents, Please specify costs and timeframe.

View More


Description:

Materials laboratory needed for Polypropylene testing in a plastic to determine:
Is the material Homopolymer or copolymer
Is there any fillers present (caliuim,talc? )
What is the izod
What is the melt Flow index

View More


Description:

Mirror manufacturer needs materials certificaiton laboratory for quality control vendor certification testing of mirrrors to ASTM standards per customer requirements. Mirrors have a thickness ranges 3 to 6 mm.


Waiting for your positive reply.

View More


Description:

Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building materials of ready mixed mortars, tile adhesives, waterproofing materials, additives and amplifying fluids....

View More


Description:

Materials laboratory needed for motorbike gloves testing to EN 388 (Abrasion, Blade cut, tear and punchar) EN 420, ( PH, value, Crom VI, and etc). Please send the quotation, time and material required for these)

Requirements:

EN 388 (Abrasion, Blade cut, tear and punchar) and EN 420 ( PH, value, Crom VI, and etc). for motorcycle garments ( gloves).

View More


Description:

URGENT Materials laboratory needed for physical and microbiology ASTM testing of tape bituminous wrapping tape used in petroleum pipelines
Property Values Test method
Tensile strength 12 N/mm2 BS 2782
Elongatio...

Requirements:

Property Values Test method
Tensile strength 12 N/mm2 BS 2782
Elongation 300 ASTM D 1000
Tear resistance >50 ASTM D1004
Adhesion to steel >2 AST...

View More


Description:

URGENT Materials laboratory needed for testing to ASTM F2466-10, Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications

Requirements:

Need to have test in place, results are required within 3 to 5 days.

View More


Description:

Materials laboratory needed to test a 2 component thin set mortar; a polymer modified stone adhesive to adhere thin stone.

View More


Description:

Marble quarry need laboratory for ANSI testing of 4 products. Quarry makes marble blocks, as raw material in order to produce high quality building materials of ready mixed mortars, tile adhesives, waterproofing materials, additives and amplifying fluids....

View More


Description:

Laboratory needed for microbiology, preservative efficacy, nanomaterials and packaging compatibility testing of skincare products

Requirements:

1. Microbiological test reports
2. Preservative efficacy test results
3. Product - Packaging compatibility test results
4. Confirmation on presence of any nanomaterials - Y/N

View More


Description:

Materials laboratory needed to test a 2 component thin set mortar; a polymer modified stone adhesive to adhere thin stone.

View More


Description:

Materials laboratory needed for ASTM and Lubrizol Testing for Test cloud point of water soluble ethoxylated product. Cloud point of a liquid detergent formulation to ASTM D2024-09 or TP-AATM-108A-a Lubrizol Test Procedure

Requirements:

ASTM D2024-09 or TP-AATM-108A-a Lubrizol Test Procedure

View More


Description:

Materials laboratory needed for #ASTM Testing to ASTM D3539 and ASTM D1331 for 31 liquid coating systems.

Requirements:

ASTM D3539 Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer, ASTM D1331 Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer

View More


Description:

Materials laboratory needed for vinyl ester resin testing to BS 5480, ASTM D3262, ASTM D3681, ASTM C581

View More


Description:

Materials laboratory needed for testing of acoustic sliding folding partition.

View More


Description:

Large consumer products company needs CPCB authorized materials laboratory for Plastic (Multi Layer Packaging) recyclability testing

Requirements:

Lab should be Authorized by CPCB

View More


Description:

Materials Laboratory needed for polymer testing for Toxic Substances Control Act TSCA exemption under rule 40 C.F.R. § 723.250, Polymers

View More


Description:

Materials laboratory needed for physical testing of machine part that has Sulphuric Anodization on Aluminium that require following testing.


a. Insulation of the oxide coating (Disruptive voltage test)
b. Sealing quality ? to measure lo...

Requirements:

Dear SIr

We would like to enquiry if your lab able to provide below service:

part with Sulphuric Anodization on Aluminium that require following testing.


a. Insulation of the oxide coating (Disruptive voltage test)
b. Sealing qual...

View More


Description:

Materials laboratory needed for ASTM Testing of chemical composition of galvalume coating. and the methodology.

Requirements:

ASTM Confidential

View More


Description:

Materials laboratory needed for ASTM boat cleaner testing on fiberglass and wood to determine it is effective and non-harmful in cleaning grease, oil, gas, scum and marine growth from boat hulls that comprise of fiberglass and wood and will not harm the s...

Requirements:

ASTM; I really want this tested to make sure it works on fiberglass and wood and removes grease, oil, scum, gas, and marine growth from boat hulls.

View More


Description:

Organization needs geology laboratory for Certification testing of Geological Reference Materials

View More


Description:

Materials laboratory needed for PTFE (teflon) powder analysis to determine the level of any residual contaminants for filing a FDA GRAS notice . The detection method would have to be sensitive enough to show that the levels are <0.5 ppb . Please provide...

View More


Description:

Materials laboratory needed antioxidants depletion testing of type of high density polyethylene geomembrane.

View More


Description:

Construction Materials Laboratory needed for ASTM Testing on Building Caulking to many ASTM Standards: ASTM C 679
ASTM C 639
ASTM D 2240
ASTM C 794
ASTM C 1135
ASTM C 719
ASTM C 1248
ASTM D 0412
ASTM D 2240
ASTM D 0624
ASTM C 0794
MIL-S-8802
...

Requirements:

ASTM C 679
ASTM C 639
ASTM D 2240
ASTM C 794
ASTM C 1135
ASTM C 719
ASTM C 1248
ASTM D 0412
ASTM D 2240
ASTM D 0624
ASTM C 0794
MIL-S-8802

View More


Description:

Russia Materials Laboratory needed for ASTM Testing for determination of iodine adsorption - ASTM D1510-13
The lab must be accredited by a single national accreditation system.
The lab must be provided with equipment in accordance with the methods descr...

View More


Description:

UK cosmetics laboratory needed for full quality control testing and analyses needed for the soap industry including all raw materials (oil, water...) and finished products to to assure that the soap production is controlled and meet the EU standards and ...

Requirements:

labs in the UK.

View More


Description:

Materials Laboratory needed fo Testing shear strength flatwise testing Fabric base of phenolic sheet sample as per India Standards IS 2036, Phenolic Laminated Sheets

Requirements:

India Standards IS 2036, Phenolic Laminated Sheets

View More


Description:

India Materials laboratory needed for polymer testing of free monomers in polymers. Free monomers 1: Acrylic acid 2: sodium hydro sulfite in a product Having 75% Water & 25% Salt of 2 propenoic acid telomere with sodium hedrogen sulfite

View More


Description:

India materials laboratory needed for testing red and yellow ochre

View More


Description:

Fittings company needs India analytical chemistry laboratory for raw material testing: Spectro (Chemical Analysis,) Micro, Mechanical,sand testing( No-Bake and Green sand) and in-coming raw materials testing etc.

View More