Laboratory Outsourcing and Scientific Sourcing Center

Need Laboratory Services or Products?

Submit Laboratory Request

Recent Electronics Laboratory Requests

Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Electricals and electronics testing facility needed for testing resistor current noise to comply IEC 60195 (Method of measurement of current noise generated in fixed resistors...

URGENT
Company importing hot pizza vending machines needs a China third-party testing facility to have OSHA's NRTL UL certification.
As a first step we would like to get the...

BUDGET APPROVED ($5000-$10,000)
Contract Laboratory needed for contaminant identification testing found in liquid cooling a commercial electronic product with a 50/50 mix of ...

Contract Laboratory needed for testing down hole tools and electrical equipment. Testing include thermal cycle, erosion flow, gas, water pressure test etc. Tool size can be r...

USA Consumer Products Electrical Safety Laboratory needed for UL Hair dryer safety evaluation to UL 859 Household Electric Personal Grooming Appliances

Asia laboratory needed to conduct Persistent Organic Pollutants (POP) analysis testing on our product for the ESD requirements.

Electrical Product Safety Laboratory needed to provide AS or IEC testing of electricity metering equipment in compliance with IEC 62052 Electricity metering equipment (AC) - ...

USA Certified Laboratory needed for IEEE testing of a cable lubricant product tested in accordance with IEEE 1210-2004 Standard. This standard tests the impact of the cable l...

Europe Laboratory needed for IEC testing of products as per IEC 61823 Electrical installations for lighting and beaconing of aerodromes - AGL series transformers

Medical Device Laboratory needed for ISO Biocompatibility Studies Testing of a critical care ventilator to the following ISO Test Standards:

ISO 18562-2 Biocompatibility e...

MULTIPLE PRODUCTS
USA Electrical Laboratory needed for compliance testing car charger adapter and bluetooth mouse

Electrical Laboratory needed for UL testing surge protection devices with a prospective short circuit current of 50 kA DC at a no-load voltage of 150 V DC to UL1449 Surge Pro...

Turkey Laboratory needed for on-site LED lighting measurements.

MULTIPLE TESTING
Electrical Laboratory needed for IEC Testing of Dielectric constant/Dissipation factor to IEC 61189-2-721 2.45GHz Test methods for electrical materials, prin...

Contract Laboratory needed for ANSI / AAMI testing of single lead hardwired ECG cable 19 long terminated with a snap-on connector as per ANSI / AAMI EC53 ECG Trunk Cables And...

MULTIPLE TESTING
ISO 17025 Electrical Compliance Laboratory needed for IEC Certification Testing of EV Charger as per IEC 61851-21-2 (Electromagnetic test). If you have any ...

MULTIPLE TESTING
Electronics Testing Lab required for authenticity testing of microelectronics.Testing for microelectronics parts (LTC2404IG#TRPBF)

Contract Laboratory needed for Telcodia GR 20 fiber optics flat drop cable testing as per GR20 Optical Fiber and Optical Fiber Cable specifications.

MULTIPLE TESTING
Electrical Compliance Laboratory needed for compliance testing of UPS system-based product, which includes AC to DC battery charger, Battery packs

MULTIPLE TESTING
Consumer Products Laboratory needed for CPSIA, ASTM, EU CE, UKCA, and Canada SOR testing of toy set in compliance with Amazon.com requirements and for cert...

Electronics Laboratory needed for failure root cause analysis testing of current transformer that is not working.

MULTIPLE TESTING
Large Corporation needed for electronics testing
1) EDS analysis along grain boundary for Cr depletion
2) Intergranular corrosion analysis for sensitized 3...

MULTIPLE TESTING
Contract Electronics Laboratory needed for angle, intensity, and angular shape testing of near infa-red IR LED (780nm) powered at 40mA each diode They both ...

MULTIPLE PRODUCTS
USA LABORATORY
Contract Electronics Laboratory needed for lamp total luminance/area (candela) testing of four LED lamp assemblies

MULTIPLE TESTING
USA LABORATORY (Wisconsin Lab Preferred)
Third Party Testing Laboratory needed for on site testing of electrical switchgear. Guidance on testing is requir...

MULTIPLE TESTING
Contract Laboratory needed for testing Mini Low Voltage Couplers for CSA approval

MULTIPLE TESTING
Third Party Testing Facility needed for flying probe testing for electronic contract manufacturer

FDA GMP Medical Device Laboratory needed for the following electrical testing on electrosurgical devices:
1. Maximum Pulse Current
2. Maximum Current
3. Maximum Current D...

MULTIPLE TESTING
Contract Laboratory needed for FCC (Federal Communications Committee) certification testing of IoT animal wellness tracking device. In this product portfol...

NORTHWEST USA (Greater Seattle Area Preferred)
MULTIPLE PRODUCTS
Contract Laboratory needed for cellphones, laptops and tablets testing to measure RF/EMF radiation levels. ...

Contract Laboratory needed for the following automotive High Mounted Stop Lamp testing:
1. Floating ground test
2. Induction noise resistance
3. L-load connected circuit p...

United States Preclinical Contract Research Organization needed for FDA / ISO biocompatibility Study testing of ex vivo porcine belly skin damage from an electrosurgical pen p...

APPROVED BUDGET ($6000 USD)
MULTIPLE TESTING
ISO Accredited Laboratory needed for ISO testing of electric toothbrush as per ISO 20127 (Dentistry ? Physical properties of p...

MULTIPLE TESTING
MULTIPLE PRODUCTS
Contract Laboratory needed for measuring and certification testing of electricity smart meters.

ISO 17043 Medical Device Laboratory needed for IEC Proficiency Testing for IEC 60601-1 basic safety and essential performance of electrical medical equipment and electrical m...

USA LABORATORY
Contract Laboratory needed for measuring intensity as a function of beam angle for failing IR LEDs (infrared light-emitting diode).

Independent Third-Party Electrical Laboratory needed for confirmation testing of voltage difference on a part TPS65311QRVJRQ1 (Texas instruments) that is outside of the manuf...

MULTIPLE TESTING
Electrical Laboratory needed for EU and USA voltage compliance testing of Automotive Cable

Independent Third-Party Laboratory needed for UL and ASTM electrical tapes new vendor qualification testing to ASTM D-1000 and UL510 which includes tests like adhesion to st...

Electrical Laboratory needed for IEEE Testing of Synchrophasor in compliance with IEEE C37.118 IEEE Standard for Synchrophasor Measurements for Power Systems Please let me kn...

MULTIPLE TESTING
Independent Third-Party Laboratory needed for FMVSS Flame Testing of automotive coaxial cable type RG58 for under standard R118 (FMVSS-302) Flammability of ...

MULTIPLE TESTING
USA Medical Device Laboratory needed for AAMI and IEC testing of disposable transducer to AAMI BP22?1994?R?2016 and IEC 60601-2-34:2011,

MULTIPLE TESTING
USA Contract laboratory needed forCalifornia Energy Commission Certification Testing for Portable spas hot tub

MULTIPLE TESTING
USA Physical Laboratory needed for durability testing for our E-Cylinder smart lock product.

EUROPEAN LABORATORY (Switzerland, Germany or France Lab Preferred)
Large Energy Company needs Europe Laboratory for bisphenol-A BPA migratory testing on electrical insulation...

LONG TERM TESTING
APPROVED BUDGET
Contract laboratory required to test power capacitor to IEC 60831-1, IEC 60831-2.

MULTIPLE TESTING
Telecommunications Laboratory or FIPS Testing of Android devices, using Androil 11 boringssl, OS to do FIPS 140-2 Security Requirements for Cryptographic M...

MULTIPLE TESTING
Contract Laboratory needed for ASME and NFPA testing of hyperbaric chambers for compliance with ASME-PVHO-1 (American Society of Mechanical Engineers-Pressu...

Interested in or want to see more Laboratory Requests?

If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, call us at 1-855-377-6821, e-mail us or view more Laboratory Requests