Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
We have a new requirement for spark-proof evaluation of inverters,
driven by the introduction of the next-generation refrigerant R290.
We intend to conduct engineering tes...
MULTIPLE TESTING & PRODUCTS
Need the following tests done on drone pole accessories:
• Type of Steel
• Dimensions
...
We need to test the release mechanism on a boat anchor we produce, which will be used in salt water. Also, we would like to know what steel materials we should use.
MULTIPLE SAMPLES
We're looking for US Department of Transportation (DOT) shipping classification support for powders.
We need to test valves with low-pressure air to calculate pressure losses. Pressure from 5 mbar to 100 mbar; size from 1 to 4.
We’re interested in having some springs, screws and Schrader valves tested for us to a standard of STANAG 2897 (Testing for Non-Magnetic Tools Used in Explosive Ordnance Dispo...
MULTIPLE SAMPLES
I need a USA laboratory to test for Bisphenol S in thermal paper samples with an adhesive backing - expecting a short turnaround time.
Need a bench-top oven/furnace that can reach 1200°C/2200°F or more to heat a small sample (with zero volatiles).
Please respond quickly.
Seeking a laboratory for the electrical characterization of a fluid dielectric. No relation to any compliance standards, just functional testing. Regarding capability, the lab...
BUDGET APPROVED ($5,000-$10,000)
Require a US facility for extraction testing on a cured 2K epoxy coating for FDA compliance.
Looking to identify substances inside a mechanical steel tube used in an automotive steering linkage system using a mass spectrometer. Have several samples ready to test. Plea...
We would like to conduct ASHRAE 97 test (latest version; Sealed Glass Tube Method to Test the Chemical Stability of Materials for Use within Refrigerant Systems) and miscibili...
MULTIPLE SAMPLES
LONG TERM
BUDGET APPROVED ($100,000+)
Need to conduct high flow and high pressure water flow testing on a large check valve prototype. Fl...
Need a Delhi / India lab for EMI/EMC on-site testing and CE certification for low voltage directive (LVD) equipment.
We have a product installed in US homes and businesses that has individually certified components (UL/CE) and some framing that we create. We need a certificate from a US labo...
MULTIPLE TESTING
We're looking for fire blanket testing with up to 9000 lithium batteries per DIN 91489 (Requirements for fire limitation blankets for use with electr...
MULTIPLE TESTING
We are developing an innovative chemical textile recycling technology for poly-cotton textile waste, primarily. We require the following R&D supp...
Looking for a third-party laboratory for SAE J2064 testing on a flexible hose product.
(Coup...
Need to run a short QUV comparison between three samples for accelerated weathering testing - roughly 150 to 250 hours.
We require refrigerant quality testing in chillers HVAC installed in one of our locations in Israel - we have noticed the refrigerant degrade over time. The lab partner should...
MULTIPLE SAMPLES
BUDGET APPROVED ($2,000-$5,000)
Looking for a testing facility in Canada / North America to perform a Komatsu hot tube test (KHT) for an e...
MULTIPLE TESTING
BUDGET APPROVED ($1,000-$2,000$)
Require laboratory testing in the USA to determine the bromine index in an inorganic absorbent, following ASTM...
A leading global filtration expert needs Clean Air Delivery Rate (CADR) testing for air filters. We are currently developing new air filtration solutions and are looking fo...
MULTIPLE PRODUCTS
We need a calibration certificate from an ISO 17025-certified laboratory in Kuwait / UAE for the following equipment:
Chemical permeation testing needed for nitrile gloves per EN 16523-1 standard method. We're looking for more extensive, uncommon chemicals testing, beyond the listed ones in E...
We're building a bioreactor and would like to investigate encapsulating Ru-complex for optical dissolved oxygen sensors as demonstrated in this paper: https://doi.org/10.10...
MULTIPLE TESTING
An Indonesian technical textile manufacturer is looking for an independent laboratory specializing in automotive testing for polyurethane (PU) artificia...
We're looking for Europe laboratories for energy consumption testing for a beverage cooler per EN ISO 20044 (Measurement of radioactivity in the environment — Air: aerosol par...
Looking for an Italy laboratory to test our product under UNI 10687 for asbestos encapsulation.
UNI 10687: Mechanical vibration — Description and determination of sea...
BUDGET APPROVED ($1,000-$2,000)
Looking for torque testing a 45-inch tool used in manufacturing.
URGENT
Electricals laboratory needed for LED luminaire testing for antibacterial activity. Please advise the availability for this test, cost, the number and size of ...
URGENT
MULTIPLE TESTING
USA Analytical laboratory needed for identifying an unknown oil compound. We have an oil sample that we can identify 90% of what is in i...
MULTIPLE TESTING
Industrial Company needs Analytical Chemistry Laboratory for Uric Acid Analysis
MULTIPLE TESTING
Chemical Laboratory needed for testing product to demonstrate efficacy for EPA registration for swimming pool disinfectant.
I believe the AOAC Use-Diluti...
BUDGET APPROVED ($100,000 USD)
MULTIPLE PRODUCTS
MULTIPLE TESTING
Contract Laboratory needed for testing metal products for compliance to the following standards:
- Fatigu...
MULTIPLE SAMPLES
BUDGET APPROVED ($1,000-$2,000)
Surface energy measurements needed from solid surfaces using ASTM D7490 standard for about 10 materials. Please...
BUDGET APPROVED ($1,000-$2,000)
Need magnetic permeability testing in the USA per ASTM A342M (Standard Test Methods for Permeability of Weakly Magnetic Materials) met...
MULTIPLE TESTING & SAMPLES
BUDGET APPROVED ($1,000-$2,000)
Need Benzene, Toluene, Ethylbenzene, and Xylene (BTEX) testing on caps and cork products that clo...
Physical and Chemical Properties testing needed for a research project: Tilapia (Oreochromis niloticus) Scales in Strengthening the Quality of Fiberglass. We aim to tes...
MULTIPLE SAMPLES
LONG TERM
We need an India-based testing facility for microstructure analysis of sintered parts.
An auditor needed for inspections on adhering PTFE strips to fabricated steel components. Please call the number provided.
MULTIPLE SAMPLES
LONG TERM
We need European standard EN 6072 testing for aerospace Metallic Materials: Constant amplitude fatigue testing for Shot Peening proce...
Need to determine the maximum film temperature at which thermal degradation (cracking) begins in Triethylene glycol (TEG).
FDA contract laboratory for ACS testing for our raw material
Contract laboratory needed for SAE ARP1536A abrasion test for chafe guard. Can you help with this standard testing?
Thank you in advance and have a nice day.
Contract laboratory needed for permeability testing of refractory insulation material made from a blend of alumina and silica. The relevant standard is ASTM-C577 (Standard Tes...
LONG-TERM
BUDGET APPROVED ($10,000-$25,000)
MULTIPLE SAMPLES
USA Marine CO2 removal company needs ecotox analyses on discharge and some control...
MULTIPLE SAMPLES
Industrial chemicals manufacturer needs Chemical Oxygen Demand COD testing on two cleaning products. US EPA Method 1320 has been suggested but altern...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests