Laboratory Outsourcing and Scientific Sourcing Center

BUDGET APPROVED ($1,000-$2,000)

Looking to get molded High Impact Polystyrene (HIPS) parts tested for chemical contamination in Georgia / USA. We suspect some contami...

URGENT

MULTIPLE SAMPLES

BUDGET APPROVED ($1,000-$2,000)

USA Analytical material laboratory needed to measure fluorescence of polystyrene plastic labware s...

Polymer testing laboratory needed to perform melt flow rate (MFR) testing for a polystyrene resin per the ASTM test standards.

Contract testing facility needed to test dome houses per the industry standards (ASTM and NFP) in the US.
I found that a total of 8 tests are required:
1. Standard Test Met...

CANADA LABORATORY
MULTIPLE PRODUCTS
MULTIPLE TESTING
Plastics Laboratory needed for Polystyrene (PS) and Polypropylene (PP) disposable serving utensils testing to prove reu...

MULTIPLE TESTING
Large Corporation needs Polymer Laboratory for the analysis of plastic additives, for instance phosphite/phenolic/thioester antioxidants, UV absorbers type C...

BUDGET APPROVED ($2000)
Nanotechnology Laboratory needed for sizing of nanoparticle solutions. Would like DLS testing of in-house functionalized polystyrene nanoparticles.

Pharmaceutical Analytical Chemistry Laboratory needed for USP Na and K content by AAS method as per USP monograph for Sodium Polystyrene Sulfonate

Materials Laboratory needed for polymer measurements - determination of benzene content in polystyrene samples (9 samples by certified/accredited test method.

USA LABORATORY
LONG-TERM TESTING
Corporation needs USA 3rd party laboratory that provide round robin testing services in order to evaluate their accuracy and precision in t...

USA LABORATORY (Southwest Preferred)
USA Materials Laboratory needed for conventional GPC analysis of 4 general purpose polystyrene samples.
- Molecular weight data should b...

Pharmaceutical Contract Research Organization needed for In vitro feeding tube studies for Sodium polystyrene sulfonate oral suspension.

Polymer Manufacturer needs Polymer Laboratory for Polystyrene Analysis through polymerization process from monomer to polymer.
1-we need international certification of ESCR G...

Polymer Laboratory needed for impact strength and UV additive testing of Styrene material.

URGENT SASO Materials Laboratory needed for ASTM testing of thermal insulation panel to ASTM E2430 Standard Specification for Expanded Polystyrene (EPS) Thermal Insulation Bo...

Materials Laboratory needed for ASTM testing of insulation to ASTM E2430 Standard Specification For Expanded Polystyrene (?EPS?) Thermal Insulation Boards For Use In Exterior ...

Polymer Laboratory needed for ASTM polymer testing to make measurements according to ASTMD 1693 method on high impact resistant polystyrene sample(HIPS). We would like to requ...

GLP medical device laboratory needed for gamma sterilisation validation testing of a dental implant, and shelf life testing of implant packaged in ultra-high-molecular-weight ...

Pharmaceutical analytical chemistry laboratory needed for compendial USP Tests:sodium polystyrene sulfonate methods for sodium and potassium exchange as written in the USP
De...

Plastics Laboratory needed for plastics testing: Size Exclusion Chromatography Service needed. Quotation on a per sample basis. Phenolic Resins, molecular range 100-10,000. ...

India FDA Food Laboratory needed for US FDA Food Contact Surface Testing of Polystyrene disposable plastic plates need to be tested for each lot that is exported to USA

West Coast USA Plastics Analytical Chemistry Laboratory needed for Flakes Contamination Testing for: PVC, PETG, Polyamide. Need to know if testing can be done on recyled bott...

Food Contact Manufacturer (Paper 1/2PE coated paper cups.Polystyrene lids,PP Cups,Paper Plates. needs food laboratory for migration and heavy metals testing to American/Europ...

Large Aerospace Company needs Silicon Valley, California Materials Laboratory for High Performance Size-Exclusion Chromatography Testing: HPLC/GPC for MW distribution determin...

Chicago Materials laboratory needed for intrinsic viscosity testing of polystyrene IV testing on demand

Physical Laboratory needed for off-gassing testing when heated to 300-400º F on Ten mil polystyrene sheet.

ASTM Environmental Laboratory needed to test Polystyrene cutlery with pro-degradant additive. Tests required are ASTM D5511 and ASTM D5526.

India Analytical Chemistry Laboratory needed to test Oligomers in Polystyrene

India Physical Laboratory needed for IS thermal conductivity testing for expanded polystyrene sample

Houston, TX Toxicology Laboratory needed for testing PVC, polystyrene, polycarbonates.

India Materials laboratory needed for ASTM Surface Burning Testing of Extruded Polystyrene Foam Boards Thermal Insulation according to standard ASTM E 84 for surface burning c...

Israel, ISO 17025 Materials Lab needed for testing, polystyrene particles counting
particles size distribution (Malvern)
Z-potential measurement (Malvern)

Sensory laboratory needed for testing recycled polystyrene pellets for odor type and strength

Analytical Chemistry Laboratory needed to do TGA and GPC testing on three different classes of nominal "polystyrene" to discern what exactly are in them.

Fine art production company needs physical laboratory conducting UV resistence accelerated study. Company currently reproduces fine art using offset presses; we are consider...

Physical laboratory needed for determination of light transmittance of an optical lens manufactured from crystal polystyrene. Must be able to meet a minimum specification of ...

EPS material: Expandable Polystyrene tested to FDA 21CFR177.1640