Laboratory Outsourcing and Scientific Sourcing Center

Looking for pricing for the ASTM D524 fuel sample kit.

ASTM D524-15: Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

Power analyzer testing for an R&D project to measure voltage to 0.01% of full scale at 100 V at a minimum sampling rate of 5ns. A HIOKI POWER ANALYZER PW8001 could potenti...

URGENT
Analytical chemistry or petrochemical testing laboratory needed to perform a simple Viscosity Index test per the ASTM standards on a 16 oz 15W40 CK4 Motor oil.
The ...

CONSULTING
MULTIPLE TESTING
Materials Laboratory needed for robotics product creep rupture testing. We can send a statement of work once you reach out via email.

MULTIPLE TESTING
Independent Laboratory needed for brushless DC (BLDC) electric motor rotor magnets product testing for fragment / cut sample of hard magnetic compound and de...

MULTIPLE TESTING
Contract Laboratory needed for certification testing of a line of AC Electrical Submersible motors to Class 1, Div.1, Grp C

Contract Laboratory needed for ISO 16332 testing to investigate water separation characteristics for diesel applications including interfacial tension, water droplet measureme...

ON-SITE TESTING (Washington State)
USA Laboratory needed for motor cooling air testing at manufacturing facility.

MULTIPLE TESTS
Contract Laboratory needed for electric motor testing - 144v (DC) - 20KW electric motor test for power output, efficiency, amp rating, torque rating etc.

Product Testing Laboratory needed for functional and life testing of a Dryer Drive Motor to ensure it fits correctly to replace OEM units.

FDA GMP Bioanalytical Laboratory needed for blood testing for platelet yield , %platelet recovery and platelet recovery factor in PRP tubes for obtaining autologus plasma . U...

Medical Device Laboratory needed for transdermal patch testing of adhesive ingredients for milligrams of 5-HTP and Magnesium Oxide are contained within the patch.

FDA GLP Pharmaceutical laboratory needed for Active Pharmaceutical Ingredient Testing: Analysis of APIs using test methods:
1) Elemental composition (CHNO)
2) 1H NMR
3) 13C...

Large corporation needs laboratory for LC/MS quantification of synthetic cannabinoids in urine samples specifically: AB-PINACA and its metabolites (AB-PINACA pentanoic acid i...

Toxicology Laboratory needed for toxicity tests and eco-toxicity testing of new molecule used in a Medical Disinfectant for new surfaces. These tests we need to be able to w...

START-UP Personalcare company needs Materials laboratory for Product Safety and GMO Testing of materials in tampons to understand if material is GMO (if cotton) vs organic, a...

Contract Medical Device Laboratory needed for FDA Testing of endotracheal tubes (ETT) to FDA recognized standards.

? ISO 5356-1 (2015), Anaesthetic and respiratory equipme...

Europe FDA Laboratory needed for personal lubricant testing to be in compliance for submission with the FDA. Please specify the price and how long it will take

Medical Device Microbiology laboratory needed for sterilization testing of operating room surgical light plastic handles at parameters:
? Temperature 134 C
? ...

FDA GMP Medical Device Laboratory needed for biocompatibility testing of polypropylene mesh for medical use for a 510(k) application in accordance with the Blue Book Guidance...

Packaging laboratory needed for ASTM transportation testing for the new medical device packaging box according to ASTM D4169-09 as per below: Please help to quote the test ...

Life Science Company needs Toxicology laboratory for in vivo toxicity studies in rats.

Biomaterials laboratory needed for in-vitro surgical sealant testing 1. Burst test of surgical sealant (2-PEGs) as per ASTM F2392.
2. Gel Time test - surgical sealant (2-PEGs...

Polymer Laboratory needed for optical density rating on a couple of pieces of polycarbonate. One would be a clear piece and the other a smoked grey piece. Both would be a .25 ...

Medical Technology Laboratory needed for biomechanical testing of dental implants to ISO14801 - compression to failure and fatigue testing of dental implant systems

Toxicology laboratory needed for in-vitro cytotoxicity testing of medical product. Biological evaluation of medical devices -- Part 5: Tests for in vitro cytotoxicity

Medical Device Microbiology laboratory needed for sterilization testing of operating room surgical light plastic handles at parameters:
? Temperature 134 C
? ...

Medical Device company needs textile laboratory for laundering testing for patient slings to CAN/CGSB 4.2 Method 58

Looking for a quote.

FDA Medical Device Laboratory needed for Functional Tests for orthodontic metal medical device expander .
We're expecting to have a list and quote for required tests.

Microbiology Laboratory needed for sterility testing of diagnostic reagent and then identification testing of any failures by culture identification testing

FDA Electrical medical device laboratory needed for Skin massager testing:
2. FDA Product Code : PBX
3. Performance test standard
? IEC 60601-1: Medical Electrical Equipme...

Environmental Laboratory needed OECD 310B testing of a new enzymatic detergent, along with a biodegradability certification for labeling conformance.

Microbiology Laboratory needed for non-GMP Sporicidal testing (glutaraldehyde based sterilant ) , not intended for submission to any regulatory authority.

functional tests for an is an orthodontic medical device intended to be used for widening upper jaw. Could you please send us a proposal for testing this device

ILAC certified laboratory needed to perform testing of instruments and systems against IEC 60601-1-2, Medical electrical equipment - Part 1-2: General requirements for bas...

Medical Device CE Mark microbiology certification laboratory needed for CE certification testing of opthalmology multi purpose contact lens solution. CE require the following...

LONG-TERM TESTING Clinical Central Laboratory processing blood and plasma needed for product development and optimization studies microfluidic devices and their components to...

ILAC Accredited medical device laboratory needed for ISO Testing of dental motors and instruments ISO 14457:2012, Dentistry -- Handpieces and motors

Consumer Products Laboratory needed for ANSI sunglasses testing to and certifiy sunglasses witht he ANSI rating.

Medical Device firm needs laboratory for accelerated aging stability study upto 12 months for medical device

FDA GMP preclinical laboratory needed for ISO 10993 Biocompatibility testing for a Class II Hemodialysis Catheter

Medical Device Laboratory needed for Medical Device Testing to ASTM 640-12, Standard Test Methods for Determining Radiopacity for Medical Use

USA Microbiology Laboratory needed for Microbial Challenge and Disinfection Studies for needlefree medical device connectors;

Pharmaceutical company needs acoustics laboratory for ultrasound gel testing to determine sound velocity, acoustic impedance, sound attenuation

Medical Device Company needs laboratories for Compression testing on gloves made from Spandex and Nylon (mm mercury pressure)
range.

China Medical device manafacturer needs microbiology laboratory for medical dressing testing prior shipment to USA to identify the microorganisms.

USA FDA GMP Veterinary Medicine Laboratory needed for pet/animals product testing of veterinary medical device which is using cold plasma technology. Testing needed to suppor...

Medical device company needs GLP laboratory for quality control of Ophthalmic viscosurgical devices, according to ISO 15798:2013, Ophthalmic implants -- Ophthalmic viscosurgic...