IEC Testing


Laboratory Test Request Description

Electrical Laboratory needed for IEC Testing of electrical steel stamping IEC 60243-1 the DC break down voltage of the insulation shall be measured , there fore few lamination shall be used. At each sample 5 measurement points on each side shall be carried out. One area of the lamination shall be sanded and used as one electrode. The other cylindrical electrode made of copper is placed on the surface. The diameter of cylinder shall be 40mm, the edge at the bottom of the electrode shall be rounded with 5mm radius (the conduct face of the electrode shall have a dia of 30mm ). The whole area of the cylindrical electrode shall we lie on the lamination, If this is not possible, It is allowed to use a smaller diameter of electrode (the rounding radius shall stay constant) . The diamter of electrode shall be documented .


INFORMATION

Number: 21-02815

Industry: Metals



Interested in learning more about this
Metals Laboratory Test Request?


Unlock more information about this
Laboratory Test Request


Other metals laboratory services.


Other Metals testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs include :

  • Microstructure Defect Analysis Testing
  • Microstructure Heat Treatment Analysis Testing
  • Metallurgical Testing
  • Electrical Conductivity Testing
  • Thermal Conductivity Testing
  • Compression Testing
  • Bending Testing
  • Flexural Strength Testing
  • Formability Testing
  • Micro-Cleanliness Testing
  • Salt Spray Corrosion Testing
  • Plating Thickness Testing
  • Density. Porosity Testing
  • Stress Corrosion Cracking (SCC) Testing
  • Environmental Stress Cracking (ESC) Testing
  • Toughness Testing
  • Melting Temperature Testing
  • Dezincification. Coating Thickness by XRF Testing
  • SEM Testing
  • Cross Section Testing
  • Fractography Testing
  • Surface Analysis Testing
  • Ductility Testing
  • Reflectivity Testing
  • Microstructure Testing
  • Mechanical Properties Testing
  • Machining Evaluation Testing
  • Plating Evaluation Testing
  • Impurity Inclusions Testing
  • Tensile Testing
  • Optical Emission Spectrography (OES) Testing
  • Inductively Coupled Plasma (ICP) Testing
  • Photomicrographic examination Testing
  • Scanning Electron Microscopy Testing
  • Specimen Preparation Testing
  • Non-Destructive NDT Testing Testing
  • Ultrasonic Testing
  • Hydrostatic Pressure Testing
  • Bearing Strength Testing
  • Magnetic Particle Testing
  • Liquid Penetration Testing
  • X-Ray Inspection Testing
  • Visual Inspection Testing
  • Wear Resistance Testing
  • Weld Failure Testing
  • Plating Defects Testing
  • Coating Defects Testing
  • Microstructural Defects Testing
  • Contaminant Investigations Testing
  • Reverse Engineering Testing
  • Ultrasonic Inspection (UT) Testing
  • Magnetic Particle Inspection (MT) Testing
  • Liquid Penetrant Inspection (PT). Weld Integrity Testing
  • Weld Failure Testing
  • Heat Affected Zone (HAZ) micro-hardness Testing
  • Chemical Analysis Testing
  • Glow Discharge Spectroscopy (GDS ? Bulk Analysis) Testing
  • Energy Dispersive Spectroscopy (EDS ? Micro Analysis) Testing

Learn more about metals testing and research

Need Metals Testing or Scientific Research?

Save time and money searching. Simply, submit a Metals request to find the laboratories or lab suppliers that best meet your needs.

Submit Laboratory Request

Test Request: 21-03177

Environmental Simulation Laboratory needed for 4 castings salt-sprayed evaluation. I can provide drawings view


Test Request: 21-03165

Metallurgical Laboratory needed to test for PGM group metal. view


Test Request: 21-02791

USA LABORATORY USA Metallurgical Laboratory needed for precious metals testing. view