Metal Parts Chemical Composition and Alloy Identification (2 Parts)

Project Description

MULTIPLE PRODUCTS
MULTIPLE TESTINGS

USA Metallurgical Laboratory needed for chemical content and alloy identification. of two parts including determination if the parts are cast or machined.

Both these parts are small, for scale, the screw is half an inch long, both parts weigh about 14 grams.

The screw is nickel plated, but we do not want the plating included in the analysis, the screw is made of brass, but we want to identify which brass was used. The little T-shaped saddle is brass, it may have some traces of nickel plating left on it but not positive. We need to know what alloy and chem content it is, and if possible if you can tell if it was cast or machined in total.

Need a price for each piece, and or if there is a discount for the two together.

Project Information

Number:20-01692

Industry:Metals

This request is closed and is no longer accepting quotes. Register or Log In to receive alerts when similar requests open in the future.

Other metals laboratory services.

Other Metals testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs include :

Microstructure Defect Analysis Testing

Microstructure Heat Treatment Analysis Testing

Metallurgical Testing

Electrical Conductivity Testing

Thermal Conductivity Testing

Compression Testing

Bending Testing

Flexural Strength Testing

Formability Testing

Micro-Cleanliness Testing

Salt Spray Corrosion Testing

Plating Thickness Testing

Density. Porosity Testing

Stress Corrosion Cracking (SCC) Testing

Environmental Stress Cracking (ESC) Testing

Toughness Testing

Melting Temperature Testing

Dezincification. Coating Thickness by XRF Testing

SEM Testing

Cross Section Testing

Fractography Testing

Surface Analysis Testing

Ductility Testing

Reflectivity Testing

Microstructure Testing

Mechanical Properties Testing

Machining Evaluation Testing

Plating Evaluation Testing

Impurity Inclusions Testing

Tensile Testing

Optical Emission Spectrography (OES) Testing

Inductively Coupled Plasma (ICP) Testing

Photomicrographic examination Testing

Scanning Electron Microscopy Testing

Specimen Preparation Testing

Non-Destructive NDT Testing Testing

Ultrasonic Testing

Hydrostatic Pressure Testing

Bearing Strength Testing

Magnetic Particle Testing

Liquid Penetration Testing

X-Ray Inspection Testing

Visual Inspection Testing

Wear Resistance Testing

Weld Failure Testing

Plating Defects Testing

Coating Defects Testing

Microstructural Defects Testing

Contaminant Investigations Testing

Reverse Engineering Testing

Ultrasonic Inspection (UT) Testing

Magnetic Particle Inspection (MT) Testing

Liquid Penetrant Inspection (PT). Weld Integrity Testing

Weld Failure Testing

Heat Affected Zone (HAZ) micro-hardness Testing

Chemical Analysis Testing

Glow Discharge Spectroscopy (GDS ? Bulk Analysis) Testing

Energy Dispersive Spectroscopy (EDS ? Micro Analysis) Testing

Learn more about metals testing and research

Metal Parts Chemical Composition and Alloy Identification (2 Parts)

Project Description

Project Information

Test Request: 25-00915

Test Request: 25-00905

Test Request: 25-00900