Casting Salt-Spray Testing
Project Description
Environmental Simulation Laboratory needed for 4 castings salt-sprayed evaluation. I can provide drawings
Project Information
Number:21-03177
Industry:Metals
This request is closed and is no longer accepting quotes.
Register or Log In
to receive alerts when similar requests open in the future.
Other metals laboratory services.
Other Metals testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs include :
- Microstructure Defect Analysis Testing
- Microstructure Heat Treatment Analysis Testing
- Metallurgical Testing
- Electrical Conductivity Testing
- Thermal Conductivity Testing
- Compression Testing
- Bending Testing
- Flexural Strength Testing
- Formability Testing
- Micro-Cleanliness Testing
- Salt Spray Corrosion Testing
- Plating Thickness Testing
- Density. Porosity Testing
- Stress Corrosion Cracking (SCC) Testing
- Environmental Stress Cracking (ESC) Testing
- Toughness Testing
- Melting Temperature Testing
- Dezincification. Coating Thickness by XRF Testing
- SEM Testing
- Cross Section Testing
- Fractography Testing
- Surface Analysis Testing
- Ductility Testing
- Reflectivity Testing
- Microstructure Testing
- Mechanical Properties Testing
- Machining Evaluation Testing
- Plating Evaluation Testing
- Impurity Inclusions Testing
- Tensile Testing
- Optical Emission Spectrography (OES) Testing
- Inductively Coupled Plasma (ICP) Testing
- Photomicrographic examination Testing
- Scanning Electron Microscopy Testing
- Specimen Preparation Testing
- Non-Destructive NDT Testing Testing
- Ultrasonic Testing
- Hydrostatic Pressure Testing
- Bearing Strength Testing
- Magnetic Particle Testing
- Liquid Penetration Testing
- X-Ray Inspection Testing
- Visual Inspection Testing
- Wear Resistance Testing
- Weld Failure Testing
- Plating Defects Testing
- Coating Defects Testing
- Microstructural Defects Testing
- Contaminant Investigations Testing
- Reverse Engineering Testing
- Ultrasonic Inspection (UT) Testing
- Magnetic Particle Inspection (MT) Testing
- Liquid Penetrant Inspection (PT). Weld Integrity Testing
- Weld Failure Testing
- Heat Affected Zone (HAZ) micro-hardness Testing
- Chemical Analysis Testing
- Glow Discharge Spectroscopy (GDS ? Bulk Analysis) Testing
- Energy Dispersive Spectroscopy (EDS ? Micro Analysis) Testing
