Grounded Closure Current Surge Testing
Project Description
Electrical Laboratory needed for current surge test as per below condition This test is intended to demonstrate that externally grounded closures can safely conduct an accidental current surge on the cable through a controlled metal path to ground. The internal current carrying components shall with stand a current surge of 1000 Amps for 5 seconds.The test shall be considered to have passed if there is no visible damage to metallic parts.
Project Information
Number:21-00941
Industry:Electronics
This request is closed and is no longer accepting quotes.
Register or Log In
to receive alerts when similar requests open in the future.
Other electronics laboratory services.
Other Electronics testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs include :
- Electrical Compliance Testing
- Certification and Inspection Electrical Safety Testing
- Certification and Inspection OSHA Electrical Standard Testing
- Certification and Inspection Electrical Performance Testing
- Certification and Inspection Testing
- Electrical CE Marking Testing
- Antenna Pattern Appliance Risk Assessment Testing
- Automotive EMC Directive Testing
- Electrical Component Failure Investigations Testing
- Electrical Conductivity Testing
- Continuity Testing
- Dielectric Strength Testing
- Dry Power Frequency Withstand Testing
- EMC Emissions Testing
- Earth Circuit Testing
- Electric Arc Hazard Assessment Testing
- Electric Arc Thermal Performance Testing
- Electric Field Analysis Testing
- Electrical Acceptance Testing
- Electrical Certification Testing
- Electrical Connector Testing
- Electrical Emmissions Testing
- Electrical Safety Testing
- Electrical Safety Testing
- Electromagnetic Compatibility (EMC) Testing
- Electromagnetic Immunity Testing
- Electromagnetic Interference (EMI) Electrostatic Discharge (ESD) Testing
- Emergency Lightning Testing
- Energy Efficiency Testing
- Environmental Simulation (ES) Testing
- Expert Testimony Failure Mode & Defect Analysis Testing
- Fire Alarm Testing
- Flashover Testing
- Functionality Testing
- High Current Testing
- High Current Testing
- High Intensity Radiated Field Testing
- High Intensity Radiated Fields (HIRF) Testing
- High Voltage Testing
- In-Situ EMC Testing
- Insulation Resistance Testing
- International EMC Mark Testing
- Leakage Testing
- Low Voltage Testing
- MIL-STD-461E EMC Testing
- Conducted Emissions Testing
- Conducted Susceptibility Testing
- Radiated Emissions Testing
- Radiated Susceptibility Testing
- Medium Voltage Testing
- Microwave Radiation Testing
- Multiple-Burst Testing
- Multiple-Stroke Lightning Testing
- NEBS Testing
- Overload Testing
- Partial Discharge Testing
- Partial Discharge Testing
- Peak Withstand Testing
- Polarity Wire Testing
- Portable Appliance Testing
- Power Arc Testing
- RADHAZ Trial Testing
- RTCA/DO-160D Testing
- Radio Interference Voltage Testing
- Resistivity Testing
- Reverse Engineering Testing
- SEM/EDS Testing
- FTIR analysis Testing
- Socket Testing
- Solderability Testing
- Temperature Rise Testing
- Terminal Attachment Testing
- Thermal Cycling Testing
- Transformer Acceptance Testing
- Utility Assessments Testing
- Voltage Endurance Testing
- Wet Power Frequency Testing
- Withstand Frequency Testing
