ASTM Testing of Multiple Aluminum Grades
Project Description
MULTIPLE PRODUCTS
Metallurgical Laboratory needed for ASTM testing aluminum grades like LM13 & LM16.
1) Wear resistance - Sliding wear measured as per ASTM G 99.
2) Coefficient of thermal expansion - Method ASTM E831, ASTM D696.
Is it possible to check the above properties at your end?
If Yes, what are the requirements for the test sample for it.
Project Information
Number:21-00808
Industry:Metals
This request is closed and is no longer accepting quotes.
Register or Log In
to receive alerts when similar requests open in the future.
Other metals laboratory services.
Other Metals testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs include :
- Microstructure Defect Analysis Testing
- Microstructure Heat Treatment Analysis Testing
- Metallurgical Testing
- Electrical Conductivity Testing
- Thermal Conductivity Testing
- Compression Testing
- Bending Testing
- Flexural Strength Testing
- Formability Testing
- Micro-Cleanliness Testing
- Salt Spray Corrosion Testing
- Plating Thickness Testing
- Density. Porosity Testing
- Stress Corrosion Cracking (SCC) Testing
- Environmental Stress Cracking (ESC) Testing
- Toughness Testing
- Melting Temperature Testing
- Dezincification. Coating Thickness by XRF Testing
- SEM Testing
- Cross Section Testing
- Fractography Testing
- Surface Analysis Testing
- Ductility Testing
- Reflectivity Testing
- Microstructure Testing
- Mechanical Properties Testing
- Machining Evaluation Testing
- Plating Evaluation Testing
- Impurity Inclusions Testing
- Tensile Testing
- Optical Emission Spectrography (OES) Testing
- Inductively Coupled Plasma (ICP) Testing
- Photomicrographic examination Testing
- Scanning Electron Microscopy Testing
- Specimen Preparation Testing
- Non-Destructive NDT Testing Testing
- Ultrasonic Testing
- Hydrostatic Pressure Testing
- Bearing Strength Testing
- Magnetic Particle Testing
- Liquid Penetration Testing
- X-Ray Inspection Testing
- Visual Inspection Testing
- Wear Resistance Testing
- Weld Failure Testing
- Plating Defects Testing
- Coating Defects Testing
- Microstructural Defects Testing
- Contaminant Investigations Testing
- Reverse Engineering Testing
- Ultrasonic Inspection (UT) Testing
- Magnetic Particle Inspection (MT) Testing
- Liquid Penetrant Inspection (PT). Weld Integrity Testing
- Weld Failure Testing
- Heat Affected Zone (HAZ) micro-hardness Testing
- Chemical Analysis Testing
- Glow Discharge Spectroscopy (GDS ? Bulk Analysis) Testing
- Energy Dispersive Spectroscopy (EDS ? Micro Analysis) Testing
