NEED LABORATORIES OR LAB SUPPLIERS?

ARE YOU A LABORATORY OR LAB SUPPLIER?

SUPPORT

Questions / Comments?
Call 1-855-377-6821or

Laboratory Requests

Most Recent protection equipment lightning Laboratory Requests

Submit protection equipment lightning Laboratory Requests

Contract Laboratory has received the following protection equipment lightning Laboratory Requests which need to be fulfilled! These protection equipment lightning Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their protection equipment lightning Laboratory and Scientific Research. If you need a protection equipment lightning Laboratory, please Submit a protection equipment lightning Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Pre-Production Speaker Testing

Large Telecommunications Company needs Acoustics Laboratory for frequency response and distortion analysis of a pre-production speaker in an Anechoic ... View More

ASTM Arc Flash Testing

Certification Laboratory needed for ASTM arc flash testing to ASTM F887 for fall protection harnesses. Laboratory must be able to certify the testing ... View More

ISO Programmable Logic Controller PLC Certification

India Certification Laboratory needed for ISO certification of Programmable Logic Controllers (PLC) to ISO 21927-9 Smoke and heat control systems --... View More

ISO Smoke and Heat control Systems

UK Industrial Laboratory needed for ISO testing to ISO 21927-9 Smoke and heat control systems -- Part 9: Specification for control equipment View More

ASHRAE VOC Air Purification Testing

Industrial Laboratory needed for ASHRAE VOC removal efficiency of air purification equipment to the following testing methods: Testing methods: ASHRAE... View More

IEC Lightning Protection Testing

Electrical Laboratory needed for IEC Testing of Grounding Enhancement Material to IEC 62561-7 Lightning protection system components View More

Downhill Snow Ski Equipment

Government Agency needs Forensics Laboratory for testing of downhill snow ski equipment involved in a fatal accident. View More

ASTM Public Playground Equipment Testing

Consumer Products Laboratory needed for ASTM testing of playground products to ASTM F1487 Standard Consumer Safety Performance Specification For Playg... View More

Electrical Sign Certification Testing

Electrical signage company needs Certification Laboratory for IEC certification of exit sign to the following testing requirements:

under the IEC ... View More

Containment Performance Testing

Nano-Pharmaceutical Company needs Laboratory for containment performance testing for its contained equipment such as isolators. Please answer the foll... View More

Nanoparticle Coating

Nanotechnology Laboratory needed for nanoparticle coating solutions testing based on metal dioxide Nano particles used for coating of SS steel.we have... View More

Nootropic Compound Certificate of Analysis (COA)

BUDGET APPROVED / LONG-TERM TESTING Bioanalytical Laboratories needed to provide a few quotes or quote package on small-sample peptide purity and spe... View More

Reusable Surgical Medical Equipment

Medical Device Laboratory needed for ISO and AAMI Testing for verification and validation of cleanliness requirement for reusable surgical medical equ... View More

Explosive Atmosphere

Aerospace Company needs Laboratory for Explosive Atmosphere RTCA/DO-160G testing for section 9 equipment View More

AIS 075 Anti-Theft Testing

India Automotive Laboratory needed for AIS Anti theft testing of keyset to AIS 075 Approval of Vehicles with regards to their protection against unaut... View More

Phototherapy Mask Spectral Transmittance

Medical Device Safety Performance Laboratory needed for EN Spectral transmittance in the ultraviolet for phototherapy masks using the European Standar... View More

Plastics Degradation from Insect Repellents

North America GLP Environmental Laboratory needed for conducting studies of several EPA Registered insect repellent formulations to determine whether ... View More

ISO and IEC Dental Equipment Testing

Medical Device Laboratory needed for ISO and IEC testing of dental equipment on ISO 14457:2017 Dentistry -- Handpieces and motors , IEC 60601-1 Medica... View More

Active Pharmaceutical Ingredient API Product Development

PRODUCT DEVELOPMENT Pharmaceutical Laboratory needed Active Pharmaceutical Ingredient API examination of complex oil-in-water emulsion drug and the h... View More

Ground Enhancing Compound ASTM and IEC Testing

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching tes... View More

Haircare Shampoos, Conditioners, Additives Testing

USA Consumer Products Laboratory needed for conducting independent accelerated package stability, physical, consumer labeling claims and microbiology ... View More

Modified EP Method Testing for Tobramycin

Pharmaceutical Laboratory needed for EP Assay & Related substances of Tobramycin as per a modified EP monograph.

Please see specific equipment nee... View More

Toronto Laboratory Rental Space Needed

Medical Device Company would like to rent Canada laboratory space to rent foanimal electrophysiology research in Toronto, ON, Canada. We will provide ... View More

United Kingdom Agriculture Pesticide Residues Testing

Tree Nurseries needs United Kingdom Agriculture Laboratory for air and surface pesticide residues (dust/droplets/vapours) are on the inside of the equ... View More

ISO Respiratory Medical Device Evaluation

Medical Device Laboratory needed for ISO evaluation of which medical device which comes under the respiratory devices category to ISO 5356 Anaesthe... View More

Initial Quote for UL Testing

Initial Quoto perform UL 1069 Standard for Hospital Signaling and Nurse Call Equipment and UL 2560 Standard for Emergency Call Systems for Assisted Li... View More

IEC Interrupting Current of Clamp

Electrical Laboratory needed for IEC Testing of interrupting current of clamp for earthing set in accordance with IEC 61230 Live working - Portable eq... View More

IEC Lightning Protection Certification Testing

Company involved in the lightning protection and grounding business would like Electrical Laboratory for IEC 62561-1 Lightning protection system compo... View More

Medical Equipment IEC Certification

ILAC accredited Laboratory needed for IEC Electrical Certification and EMC testing on two different types of Medical Equipment.

Monitor Pre-config... View More

Active Pharmaceutical Ingredient API Method Development and Validation

FDA GMP Pharmaceutical Laboratory needed for development and validation of a CE-UV/ MS compatible method, for impurities determination (MS only as qua... View More

Pharmaceutical Containment Equipment Testing

Pharmaceutical Third-Party Laboratory needed to conduct on-site surrogate testing for containment equipment according to ISPE SMEPAC method guideline... View More

Petroleum Laboratory Equipment

Petroleum Laboratory needs Laboratory Supplier to provide a quote for the following equipment for their laboratory.

LIST OF REQUIRED EQUIPMENTS
S/... View More

Goat shin gloves (leather work gloves) with aramid Lining and TPR

URGENT urgently needs Laboratory for the following tests

1. ASTM F2992-15 - TDM for Cut resistance.
2. ASTM D3389-10 and D3884-09 for Abra... View More

IEC Medical Linear Accelerator

Electrical Laboratory needed for IEC testing of medical linear accelerator
according to IEC 60976 Medical electrical equipment - Medical electron ac... View More

UL / CSA Marine Onboard Battery Charger Evaluation

Electrical Laboratory needed for UL and CSA Testing of marine onboard battery charger to UL 1236 Standard for Battery Chargers for Charging Engine-Sta... View More

Protective Paint Corrosion

Tests according ISO 12944-1:2018-06 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective... View More

Complete Engineering Laboratory Set-Up

Laboratory Supplier needed that can provide the entire set of laboratory equipment for setting up a new engineering laboratory. View More

EN Fabric Performance Testing

Materials Laboratory needed for EN performance testing of fabric used in protective clothing to the following EN Standards: EN:11611 PROTECTION AGAINS... View More

IEC Lightning Protection System Components Evaluation

Electrical Laboratory needed for IEC Evaluation of Lightning protection system components (LPSC) to IEC 62561-7 Requirements for earthing enhancing co... View More

Electrostatiic Discharge Protection Jackets

LONG-TERM TESTING Laboratory needed for electrostatic discharge ESD testing on ESD protection jackets on a monthly basis.



View More

ASTM Work Boot Performance Testing

Performance Laboratory needed for ASTM performance testing of work boot to ASTM F2413 Standard Specification for Performance Requirements for Foot Pro... View More

ISO Transfusion Set Testing

Medical Device Laboratory for ISO testing of transfusion sets to ISO1135-5 Transfusion equipment for medical use ? Part 5: Transfusion sets for singl... View More

Metal Alloys Chemical, Mechanical Properties and Mechanical Behavior

LONG-TERM TESTING Metals Laboratory needed to perform chemical composition, mechanical properties, and mechanical behavior tests on a variety of metal... View More

Environmental Laboratory Rental

Looking to rent an equipped laboratory space to perform soil testing.
Space is needed for the month of October, will be in use 2-3 times per week. W... View More

Third-Party Validation of Manufacturer's Specification

Life Science Laboratory needed for third-party validation testing (physical, microbiology, biological) of manufacturer's specifications of sterile per... View More

IEC Design Testing of High Voltage Equipment

Electrical Laboratory needed for IEC design testing to IEC61109 of High Voltage Equipment insulators
View More

HDPE Dust Flammability

LONG-TERM TESTING Industrial Laboratory needed for evaluation of high-density polyethylene HDPE dust to get a report on flammability to determine the ... View More

SAE Certification

Electrical Laboratory needed for SAE Certification testing to certify telematics products to SAE J1113 Electromagnetic Compatibility Measurement Proce... View More

Playground Safety Certification

Consumer Products Safety Laboratory needed for safety certification testing for playground equipment. View More

EN Earthing and Lightning Protection

Manufacturer needs laboratory for EN testing of earthing and lightning protection devices according to EN 62561:2017 Lightning protection system compo... View More

Manufacturing Unknown Powder Identification

Large food processor needs Analytical Chemistry Laboratory for identification testing of unknown powder sample collected from our equipment in out pr... View More

Gym Equipment Performance

Performance Laboratory needed for gym equipment testing for cycle testing and battery life. View More

Construction Safety Glass Testing

Safety Laboratory needed for ANSI/ ISEA testing of construction safety glasses to ANSI/ISEA Z87.1-2015 American National Standard for Occupational and... View More

Earpug Noise Reduction Rating

Safety Laboratory needed for earplug Noise Reduction Rating testing compliant with ANSI STD S3.19-1974 for a new earplug design. Mean attenuation valu... View More

NFPA and ANSI Safety Harness

Materials Laboratory needed for NFPA and ANSI testing of 3 different types of personal protective equipment and rescue equipment harnesses. to the fol... View More

Petrochemical Lab Construction

Architect / Consultant needed for assisting on design and equipment for Petrochemical Laboratory. View More

Disposable Diaper Evaluation

Consumer Products Laboratory needed for the following Disposable Baby Diapers testing:
Leakage protection
Skin dryness
Skin friendliness
Handling ... View More

Ventilator Testing

Medical Device Laboratory needed for ISO Testing on apparatus used on ventilator according to ISO 5356-1 Anaesthetic and respiratory equipment -- Con... View More

Yoga Equipment Testing

Independent Consumer Products Laboratory needed for yoga equipment testing including weight testing. Yoga equipment. includes carabiners, daisy chain... View More

IEC Compliance of Medical Electrical Equipment

Electrical Laboratory needed for IEC compliance testing to IEC 60601-2-47 Medical electrical equipment - Part 2-47: Particular requirements for the ba... View More

IEC Compliance of Lighting Protection System Evaluation

Industrial Laboratory required which can test earthing enhancing chemical compound as per IEC 62561-7 Lightning protection system components (LPSC) -... View More

EN Medical Device Evaluation

Medical Device Laboratory needed to perform testing as per EN 13544-2 (Respiratory therapy equipment. Tubing and connectors)
- A.3 Test method Resis... View More

Automotive Lighting Systems

Industrial Laboratory needed for testing and evaluation of automotive lighting systems, lamps and mirrors. This testing includes assisting in the dev... View More

SMEPAC / Surrogate Process Performance Study

Large Healthcare Company needs Pharmaceuticals Laboratory for SMEPAC/Surrogate powder test as part of performance testing of equipment. using lactose ... View More

Medical and Laboratory Equipment Manufacturer wishes to purchase a laboratory that sells and repairs equipment. View More

Consumer Products Laboratory needed for ASTM testing of new exercise equipment with resistance bands, clips for attachments and straps for safety and ... View More

LONG-TERM TESTING US Automotive Laboratory needed for vendor supplier confirmation cleaning testing of parts used in pumps and turbines to ensure part... View More

Heavy Equipment Company need Geology Laboratory for rare earth mineral analysis View More

Laboratory needs Contract Manufacturer to assemble kits for the NIH Taste Intensity Test which includes: gloves, 2 sterile cotton swabs, gloves (latex... View More

LONG-TERM Contract Sterilizer needed for sterilization of a range of measuring fragile medical equipment post contact with human tissue. Components mu... View More

Analytical Laboratory wishes to purchase an USA environmental Laboratory and/or all of their equipment. View More

LONG-TERM TESTING Large hospitality company needs food microbiology laboratory laboratory for monthly environmental monitoring microbial analysis of ... View More

Automotive Laboratory needed for safety, particulate emission and so2 and no2 testing of a device used in fuel tank of any vehicle or any equipment th... View More

Electrical Laboratory needed that is accredited to test in accordance to IEC 62287-1 Maritime navigation and radiocommunication equipment and systems ... View More

Laboratory needed for Energy Star verification testing on Imaging Equipment View More

Infant sleep wear fabric testing for the consumer protection agency. View More

Physical Laboratory needed for nut chipping testing using SAE J400 equipment of non-wovens. View More

Electrical Laboratory needed for ASTM Testing of safety protection gloves to ASTM F2675 Standard Test Method for Determining Arc Ratings of Hand Prote... View More

Power equipment manufacturer needs Analytical Chemistry Laboratory to identify and quantify the species of organic and inorganic content contained in ... View More

FDA GLP certified or ISO 17025 Agriculture laboratory needed for insecticides, Fungicides, Acaricides and herbicides efficacy testing as per FAO Guide... View More

Laboratory Consultant needed for advising on the complete set-up of CLIA urine and blood toxicology laboratory including laboratory equipment and star... View More

Laboratory needed for water treatment equipment testing to NSF/ANSI 419 testing of ultrafiltration membrane module View More

Medical device laboratory needed for physical testing of transfusion sets to the physical requirements of ISO 1135-4, Transfusion equipment for medica... View More

Mining company needs to purchase all available laboratory equipment for determining fumes and dust emitted to the atmosphere as a result of mining ope... View More

Start-up laboratory looking for assistance with purchasing laboratory equipment for a food testing and livestock diagnostic laboratory

View More

Microbiology laboratory for Coliform and CFU/Plate Count tests for 3-5 samples of frozen mix.
We are interested in pulling a daily sample to assess ... View More

Performance laboratory needed for ASTM and ISO testing of protective fabric used in coveralls to ASTM F2130, Standard Test Method for Measuring Repel... View More

Automotive laboratory needed for ANSI testing of glazing materials (glass) to ANSI Z26.1, American National Standard
for Safety Glazing Materials
f... View More

Electrical laboratory needed for IEC testing to the following 6 IEC Standards: IEC 61000-4-9,Electromagnetic compatibility (EMC) , IEC 60529 Degrees o... View More

Electronics laboratory needed for compliance testing of telecom equipment to the Radio and Telecommunications Terminal Equipment Directive (R&TTE) R&T... View More

LONG-TERM TESTING Electrical laboratory needed for compliance testing of electrical grounding rods and accessories as per IEC 62561 standards, Lightni... View More

Construction materials laboratory needed for vinyl flooring testing to ANSI/ESD STM 7.1 Standard Test Method for the Protection of Electrostatic Disc... View More

Medical electrical laboratory needed for IEC testing of sterile electrosurgical products to IEC 60601-1, Medical electrical equipment - Part 1: Gener... View More

Power company needs electrical laboratory for IP ingress protection IP69K testing. View More

Medical Device laboratory needed for passive ligating clip medical implant testing to several ISO and IEC standards including:

F2052 Test Method fo... View More

Materials laboratory needed for determination of optical transmission characteristics of red plastic lens resin used in laser receiver products. Th... View More

ISO / IEC 17025 Accredited consumer product laboratory needed for safety equipment testing to EN and KS standards including:
Particle filter testing ... View More

Medical device / materials laboratory needed for ASTM testing of personal protective equipment / gloves to ASTMF2878-10 (Needle Stick Test) View More

URGENT TESTING: Large corporation needs industrial hygiene laboratory for equipment cleaning validation study testing using Texwipe TX751 to test for ... View More

University Researcher needs veterinary medicine laboratory needed for measuring fat soluble vitamin A and E levels in plasma and in milk samples on hi... View More

Electrical laboratory needed for inductor testing to AC + DC load life testing of three production lots

1 3 separate lots of 77pcs each
2 Chambe... View More

Laboratory equipment calibration and electrical safety maintenance testing. View More

Materials laboratory needed for ANSI Testing of LED Smart Film products to meet welding filter requirements of ANSI Z87.1-2015 table 6, American Nati... View More

Electrical laboratory needed for SAE external ignition testing of small marine electrical equipment for use in the marine industry to SAE J1171, Exter... View More

Electrical certification laboratory needed for SAE external ignition protection testing of a small electrical device for use in marine equipment to SA... View More

Performance Laboratory needed for fume hood type testing as per EN 145175 to American Society of Heating & Refrigeration & AC Engineering ASHARE 110 t... View More

Environmental simulation laboratory needed for UV weathering testing on equipment in compliance with IEC 60068-2-5:2010 Test Sa: Simulated solar radia... View More

Electrical communications laboratory needed for IEC 61537 Cl. 10.2-10.8 testing of cable tray and ladder systems with respect to the following:

1. ... View More

RAPID TURN AROUND NEEDED. Microbiology laboratory needed for efficacy testing of a disinfectant used for sterilizing medical equipment. Quote needed. View More

Personal protective equipment laboratory needed for ASTM F2675 Arc Flash testing of a protective glove. Quote needed. View More

Electrical laboratory needed for lightning protection and corrosion testing of 5 kilograms of a liquid and solid. View More

EPA Environmental laboratory needed for dioxin testing of field equipment according to VOC EPA Method 24. View More

Automotive laboratory needed for SAE testing of a device and components to SAE J575, Test Methods and Equipment for Lighting Devices for Use on Vehic... View More

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching tes... View More

Personal protection equipment (PPE) laboratory needed for ASTM F2992 cut resistance testing of a stainless steel mesh using a TDM-100 machine.
View More

Materials laboratory needed for screw DIN Testing: 1) Screw Type: DIN7500 PE M3X8
Properties Class: 8.8
Surface protection: DIN EN ISO9227-NSS 360h ... View More

Calibration & Repair Services business of laboratory instruments for sale. Manufacturer certified service, Clients in the medical, pharma, food & indu... View More

Electrical laboratory needed for load testing in accordance with IEC 62561-5, Clause 5.2.2 Lightning protection system components (LPSC) - Part 5: Req... View More

Established environmental laboratory in Brazil would like to acquire environmental laboratory in Minnesota area as well as acquiring used lab equipmen... View More

Materials laboratory needed for DIN fastener cleanliness testing to Screw Type: DIN7500 PE M3X8Properties Class: 8.8Surface protection: DIN EN ISO9227... View More

Company looking to buy a going-out-of-business biotech company/lab. The deal shall be structured as assets (equipment) purchase + lease assumption. View More

Biofuels company needs laboratory consulting firm needed for establishing a full petroleum engineering laboratory from design and equipment. View More

Electrical safety testing and calibration of lab equipment including laminar flow hood, centrifuge, etc. View More

Medical Device Laboratory for medical equipment verification testing of wheelchair, bed alarm sensor, and lift chair according to specifications.
... View More

Electrical Laboratory needed for Ingress Protection IP69K testing for an electric motor for food industry View More

Urgent Need by Large UAE construction company for testing of foam materials per BS EN 13468 (Thermal insulating products for building equipment and in... View More

Third-Party Laboratory needed for Vibration test in accordance with standard ANSI C136.31 Standards for Roadway and Area Lighting Equipment, Luminair... View More

Building Supply company needs laboratory to test thermal insulating products for building equipment and industrial installations. Determination of tra... View More

Dental distribution company needs viral & bacterial (live/viable) analysis from wipe/swab samples. Analysis should include identification of specific... View More

Certification laboratory needed for BSMI certification testing of networking equipment. Please advise on 1.cost 2. lead time 3. what document we nee... View More

Manufacturer needs laboratory for new product development testing of new coating to be used in the abatement of surfaces that contain lead based paint... View More

Medical Device laboratory needed for Dental product testing of dental implants, abutments and surgical equipments. for drills- for radial run out, t... View More

Electrical laboratory needed for IEC certification testing for electrode holder, cable connector, and work clamp under IEC 60974, Arc welding equipmen... View More

Laboratory needed for certification of compliance to Type Testing to IEC 60974.13, Arc welding equipment - Part 13: Welding clamp View More

Electrical lab needed for: product safety requirements testing for equipment for electrical energy measurement and control. IEC and ANSI standards View More

Sports performance laboratory needed to have exercise equipment tested to current safety standards. View More

Materials laboratory needed for NATO coatings testing of chemical agent resistant coating (CARC) to North Atlantic Treaty Organization NATO AEP 64 sta... View More

Electrical laboratory needed for DIN Testing of a group of sensors as per DIN 40050-9 (IPX9K), Road vehicles; degrees of protection (IP-code); protect... View More

LONG-TERM TESTING Equipment manufacturer needs laboratory for swabbing and residue testing to detect presence of pharmaceuticals, chemicals, antibioti... View More

Large corporation needs electrical laboratory for Ingress Protection Testing of environmentally sealed toggle switch is capable of complying with Ing... View More

Laboratory needed for Industry standards and safety testing for a piece of exercise equipment. No digital or electrical component to meet government a... View More

Cosmetics Clinical Research Facility needed for UVB protectio study on human subjects: A sun protection factor (SPF) of 30 or higher. Validation of th... View More

Electrical Laboratory needed for EMC Testing to DO 160 Environmental Conditions and Test Procedures for Airborne Equipment for aviation products. View More

Independent laboratory needed for construction protection board testing to a Canadian specification.. View More

Laboratory needed for study to determine the efficient method for determining amount of residual alcohol left over after sanitizing metal mixing equip... View More

USA Materials Laboratory needed for ANSI Testing for light transmission (A light) to ANSIZ26.1-1996, Safety Glazing Materials for Glazing Motor Vehicl... View More

Industrial cleaning equipment company needs virology laboratory for Virucidal efficacy testing on Avian influenza virus (AIV),, H7N1Noroviruses, Aden... View More

Electrical laboratory needed for Ingress Protection Testing: IP tests for an outdoor enclosure
View More

Electrical Laboratory needed for Diagnostic Medical X-Ray equipment testing: Insulation Resistance test before & after Humidity condition as per BIS ... View More

Clinical Sports Performance laboratory needed for clinical biomechanical testing in humans to validate performance of university's sports biomechanics... View More

Lighting company needs optical laboratory needed for spectral transmittance measurement services. on quartz glass tubing 26mm I.D x 32mm O.D. (3mm wa... View More

Physical Laboratory needed stress testing done on chiropractic table equipment View More

FDA GMP Microbiology Laboratory needed for USP Microbiological testing (swab or contact plate) for cleaning validation of tools and equipment used in ... View More

University researcher in Plant Protection needs agriculture laboratory for water testing of water samples used for agricultural irrigation. Please pro... View More

Electrical laboratory needed for failure investigation testing for lightning cable to specific problem (or problems) with a defective 8-pin lightning... View More

Contract Medical Device Laboratory needed for FDA Testing of endotracheal tubes (ETT) to FDA recognized standards.

? ISO 5356-1 (2015), Anaestheti... View More

Contract Laboratory needed for film testing of UV400 Optical Film for UV protection and light transmission reflective, absorbtion and U Value View More

Mechanical Laboratory needed for ASME Testing to ASME PCC-2, Repair of Pressure Equipment and Piping View More

Performance laboratory needed for endurance testing for a 6 MVA transformer according to EN 50464-4, Three-phase oil-immersed distribution transformer... View More

Robotics Laboratory needed for development and evaluation studies of robotic equipment to ISO/TR 13309:1995 Manipulating industrial robots -- Informat... View More

COntract Laboratory needed for Sun Protection Factor SPF Testing by Transpore Tape Method, UV-A and UV-B protection both test are required. View More

Sports performance laboratory needed for certification testing of sports equipment that it is safe at preventing head injuries. View More

FDA Electrical medical device laboratory needed for Skin massager testing:
2. FDA Product Code : PBX
3. Performance test standard
? IEC 60601-1: M... View More

ILAC certified laboratory needed to perform testing of instruments and systems against IEC 60601-1-2, Medical electrical equipment - Part 1-2: Gen... View More

Consumer Products laboratory needed for certification testing for CE mark. compliance to the General Product Safety Directive of sports equipment. View More

Certification laboratory needed for National Fire Protection Assocation certification testing to certify a boot style to NFPA 1977 standard. View More

Consumer Products laboratory needed for certification testing for CE mark. compliance to the General Product Safety Directive of sports equipment. View More

Large oil company needs electrical laboratory for electrical compliance inspections. At our facility we use hot sticks, release hooks, and other equip... View More

Test Laboratory needed to perform filtration efficiency and pressure drop analysis on developmental media coupons. We prefer that a TSI 8130 be used f... View More

Accessory company needs consumer products testing for UV protection of fabrics used for headbands and 3 different fabrics. View More

Russia Materials Laboratory needed for ASTM Testing for determination of iodine adsorption - ASTM D1510-13
The lab must be accredited by a single nat... View More

Safety Laboratory needed for eye protection testing to ISO 4855-1981(E) Clauses 13 and 14 for eye protection. View More

Technology Laboratory needed for new panel design tests including theArc Resistant testsWe also need a Arc resistant test for a MCC, but for this MCC ... View More

Medical Technology laboratory needed for medical device testing to 60601-1 Medical electrical equipment?Part 1: General requirements for
basic safety... View More

Electrical Laboratory needed for testing of an electrothermic sensor according to the ECE R118 norm (fire protection) View More

Electrical Laboratory needed for Dimensional layout performed on Electonic board. Need to be advised as to what equipment would be used to perform th... View More

University Researcher needs laboratory for Sports Equipment testing for a 24 kilonewton Load rating and certification including durability . Load rati... View More

Europe laboratory needed for aircraft battery testing to RTCA DO-160 standard, Environmental Conditions and Test Procedures for Airborne Equipment. View More

US Certification Laboratory needed to certify product to UL608, Standard for Safety for Burglary Resistant Vault Doors and Modular Panels and UL752 ... View More

Hong Kong laboratory needed for test equipment testing View More

Metrology Laboratory for genetic's laboratory site equipment inspection and certification to meet CAP/CLIA/AABB and ASCLD-LAB standards View More

India Pharmaceutical Science Researcher needs Pharmacology Contract Research Organization for Pharmacology Study Experiments:

AIM AND OBJECTIVES OF... View More

United States Textile Laboratory needed for fabric testing for UPF protection to AATCC and ASMT testing methods: UPF Product Testing - AATCC 183, ASTM... View More

Coatings Company needs polymer lab that can test National Fire Protection Association NFPA via ASTM D6668. Standard Test Method for Discrimination B... View More

South Africa and/or Kenya Environmental Laboratory needed preparation of tender specifications for quantitative laboratory analysis of polychlorinated... View More

India polymer laboratory needed for quality control testing: Polypropylene sheet testing is required for judging its quality. we are planing to manuf... View More

Materials Laboratory needed for certification testing of PIR Rigid cold insulation,
PIR (Polyisocynurate) foam segments are high-quality insulating ... View More

Midwest USA electronics laboratory needed for investigation testing to determine the cause of intermittent connectivity or electronic scanning equipm... View More

Cosmetics analytical chemistry laboratory needed to provide a Quotation for SPF (Sun protection Factor) testing in moisturizer View More

Clinical Laboratory needed for clinical testing to substantiate the claims of a toothpaste sample namely provides 12-hour cavity protection, fights ca... View More

Advanced Materials Laboratory needed for BSEN 62561 testing for lightning protection materials Thank you very much. View More

USA Materials Laboratory needed for Intermittent testing of 3 foam sample hardness over 30,60,90,120, and 150 wash cycles. Machine wash warm, tumble d... View More

ISO 17025 certified Laboratory needed for conducting some tests on new metal roof shingles that would be distributed to the US market. These certifica... View More

Mechanical Laboratories needed for ANSI Testing: Zero turn rotary blade lawn mower safety testing to ANSI/OPIE B71.10-2013, Off-Road Ground-Supported ... View More

Bioanalytical Laboratory needed to extract Collagen Type 2 proteins from Chicken Sternal Cartilage. This is a simple process but requires specific equ... View More

Europe environmental simulation laboratory needed with climatic chamber big enough to test pantograph for train according to EN50206-1 (According to E... View More

Florida electrical safety laboratory needed for shielding effectiveness of EMI Sheidling Equipment View More

FDA GLP certification or ISO 17025 Agricultural agrochemical company needs agriculture laboratory for insecticides, Fungicides, Acaricides and herbic... View More

THird-Party Southern USA laboratory needed for longevity and reliability testing of fracturing pumps and components, in comparison with the correspond... View More

Canada Environmental Monitoring Laboratory needed for sanitation swab testing for packaging equipment View More

India EPA certified laboratory needed for EPA Efficacy Testing for a Bioremediation product. Product is used for Bioremediation of crude oil spills te... View More

Canada Packaging Laboratory needed Leak Vacuum Decay Testing on Canisters. As part of quality system, the seal qualification needs to be done before t... View More

California Bioanalytical Laboratory needed for Viscosity testing of a collagen based product. Testing needs to be performed on calibrated equipment tr... View More

USA Bioanalytical Laboratory needed for ELISA Testing of human chorionic gonadotropin (hCG) that is a sterile power for injection that I need to have ... View More

USA Product Safety Laboratory needed for ANSI Testing of Personal Protection Equipment to ANSI Z87.1 2010
need our goggles tested View More

Electrical Laboratory needed for IEC Testing: Audio, video and similar electronic apparatus - Safety requirements to IEC 60065 and IEC 60268-3:2013Sou... View More

USA Medical Device Laboratory needed for testing to EN388, Gloves Giving Protection from Mechanical Risks: Resistance to abrasion, Blade cut resistanc... View More

USA Sports Laboratory needed for ASTM Testing of Outdoor fitness equipment to pass ASTM: F2276-10, ASTM F1749-09, and possibly parts in ASTM F887 incl... View More

USA Product Safety Laboratory needed for glove cut resistance testing to ANSI 105-2005 American National Standard for Hand Protection Selection Criter... View More

Food Laboratory needed for food testing and of foods products for unnatural ingredients. We're a consumer-protection law firm interested in learning... View More

Canada GMP Health Canada Pharmaceuticals Analytical Chemistry Laboratory needed for Propofol Testing: Globule Size by Coulter Counter determination
... View More

Canada or Eastern US Safety Laboratory needed for ANSTI Personal Protective Equipment Testing of Hard hat and Visor. We're looking for testing that wi... View More

Asia Laboratory needed for FDA testing of nanotechnology surgical gowns to test textiles for barrier protection against pathogen and blood. against E... View More

USA, Argentina, Germany, France biomedical labroatory needed for IEC Testing: Ultrasound for physiotherapy - samples - 01 und
Stimulator for physioth... View More

Preclinical Contract Research Organization needed for Neurology Toxicology Studies: Ototoxicity and protection against ototoxic insults such as antibi... View More

Europe or North America Electrical Certification Testing of Personal Protection Equipment PPE to IEC 60895 testing for cunductive garments up to 800 k... View More

University Researcher needs Ireland electronics laoratory for cell phone safety and toxcity testing is needed:x-ray fluorescence spectroscopy safety ... View More

Engineering firm needs Electrical and mechanical Laboratory for Life cycle testing of industrial cleaning equipment View More

URGENT: Asia forensics laboratory needed for drilling project failure analysis. 3rd party lab which can analyze the reason of broken pipe and swivel. ... View More

Asia or Europe Laboratory needed for PPE personal protective equipment testing of chemical protective garment according to EN standard EN 13034 and EN... View More

USA electrical laboratory needed for electrical Testing of components (transformers, protection equipment, etc) against power grid (15kV) and up volta... View More

Playground equipment manufacturer planning on entering USA market needs product safety laboratory for playground equipment testing: ASTM norms (ASTM ... View More

LONG TERM: China laboratories needed for regular chemical quality control testing. Regular NMR, GCMS testing of samples to provide independent purity ... View More

India materials laboratory needed for tire sealant testing as per:

(A) Ethylene Glycol base Aqueous solution,anti corrosive,non-inflammable,non-exp... View More

FDA cGMP Microbiology laboratory needed for Hand sanitizer efficacy testing against bacteria and virus protection and 99.99% kill against harmful bact... View More

Microbiology Laboratory needed for hand sanitzer efficacy testing against influenza A virus (human) 1. Objective ? demonstrate 8 hr protection and 99.... View More

California Materials Laboratory for comparison testing of product vs. competitor product: compression testing (on an Instron machine) to determine the... View More

Electrical equipment importer needs electrical certification lab for certification verification testing to verify the authenticity of a CB Test Certif... View More

Researching partner western Russia and Easternn China laboratories ASTM ad ISO testing of in-service lubricants and coolants for equipment condition a... View More

Medical Device Manufacturer needs Florida product safety, medical device laboratory for NFPA Testing and ASME Testing to ASME PVHO 1, Safety Standard... View More

Biophysical Research and Development Laboratory needed for sporting goods product design and development studies to prevent horse collar injuries in f... View More

Midwest FDA GMP Microbiology laboratory needed for microbiology testing of E. coli bacteria-based bioprocessing platform. This involves using agar-ge... View More

Consumer Products Microbiology Laboratory needed for antibacterial efficacy study for shower cream product to substantiate claim on "24 hrs 99.9% germ... View More

Analytical Chemistry Laboratory needed for Hydrocarbon Testing for White Lightning. Elemental analyis of all elements including "Ethane." Percentage... View More

South America TOxicology Laboratory needed for Toxicity testing: Acute Inhalation Toxicity:

equipment ad materials View More

Northeast USA engineering laboratory needed for SAE Testing to Marine SAE J1171, External Ignition Protection of Marine Electrical Devices. for brushl... View More

Pharmaceutical company needs FDA GMP California bioanalytical laboratory for FDA Testing: Residual protein testing in rinse water from equipment clean... View More

Middle East Microbiology Laboratory needed for microbiology testing: Limulus Amebocyte Lysate (LAL) Testing, Endotoxin Testing on sterilization equipm... View More

Microbiology Laboratory needed for microbiology testing: environmental conditions and test procedures for airbone equipment-section 13 : Fungus Resist... View More

Microbiology Laboratory needed for anti-microbial testing of cold sterilizing solution by Immersion of medical equipment, formulated with glutaraldehy... View More

safety gloves to International Safety Equipment Association Standards, ANSI / ISEA 105-2011, American National Standard for Hand Protection Selection... View More

Japan Snow Gear manufacturer needs safety laboratory for helmet testing: EN 1077 Testing and FIS Testing to FIS SPECIFICATIONS FOR COMPETITION EQUIPME... View More

Looking for supplier to conduct and certify USA Product Safety Laboratory needed for ANSI Testing of safety lenses for the ANSI Z87.1-2010 American Na... View More

Environmental Simulation Laboratory needed for marine environmental testing: IEC Testing to IEC 60945, Maritime navigation and radiocommunication
equ... View More

US agriculture and microbiology laboratory needed for crop study using sedimentary pea gravel to grow crops from seed to harvest without any fertilize... View More

Safety Laboratory needed for ANSI Testing of safety gloves to ANSI 105-2011 American National Standard for Hand Protection Selection Criteria View More

Food Laboratory needed for formulation of silicone base food release spray to be used in equipment like waffle bakers. View More

Safety Materials Laboratory needed for ASTM Testing of PPE personal protective equipments testing as per European and ASTM standards. View More

United States biomedical laboratory needed for AAMI Testing of blood pressure transducers according to AAMI standard. The test will be performed to me... View More

Consumer Products analytical chemistry laboratory needed for tea light testing: 3-4 off tea lights that we require tested for VOC and PAH. Do you have... View More

Africa Materials Laboratory eeded for mechanical tribology testing on all the mining equipment machineries oil sampling at a progressive level. View More

Large electrical manufacturer needs environmental simulation laboratory for International Electrotechnical Commission IEC Testing of Ground Enhancemen... View More

Materials Laboratory needed for ANSI Testing to ANSI MT/75 metatarsal protection test, for Minings boots (Viking) View More

USA microbiology laboratory needed for Anti-mold products need to pass USA Environmental Protection Agency's EPA regulations of Federal Insecticide, ... View More

Physical Laboratory needed for physical testing: ANSI Testing physical glove performance testing for cut, puncture, abrasion according to ANSI 105 - 2... View More

Toxicology, Bioanalytical and Environmental Laboratory needed for materials testing of face mask material for respirator with the characteristics of d... View More

Bioanalytical laboratory needed develop/improve and perform routing release testing using an existing diagnostic kit that would be provided to the se... View More

Europe Mechanical Laboratory needed for Mechanical Testing to ISO 16750, oad vehicles - environmental conditions and testing for electrical and electr... View More

Asia lightning certification laboratory needed for certification testing for early streamer emission(lightning protection system) View More

South Sudan geotechnical laboratory needed to Conduct geotechnical investigation at Kidepo bridge site to deternmine the nature and characteristics of... View More

Canada or USA materials laboratory needed for lubricating grease testing. This is not a standard test, but it is easily run. It can be run by any la... View More

Asia Physical lightning certification laboratory needed for certification testing for early streamer emission(lightning protection system) View More

Asia Physical lightning certification laboratory needed for certification testing for early streamer emission(lightning protection system) View More

Physical lightning certification laboratory needed for certification testing for early streamer emission(lightning protection system)
View More

California Consumer Products Safety Laboratory needed for consumerproduct safety testing. Tested Required for 18" Oscillating Fan
1. Polarized Plug ... View More

FDA GMP Physical laboratory needed for dimensional verification, force to fire testing, material hardness, etc.
The equipment required would be the ... View More

Looking for supplier to conduct and certify lenses for the ANSI Z87.1-2010 American National Standard for Occupational and Educational Eye and Face Pr... View More

Ireland and UK medical device laboratory needed for ISO Testing: Analysis of medical device materials. Compliance to ISO 8536-4 Infusion equipment for... View More

USA Consumer Products Laboratory ANSI B175.3 Section 7, Outdoor Power Equipment - Grass Trimmers and. Brushcutters - Safety Requirements View More

Western Europe agricultural laboratory needed for Soil,water and seed equipments testing for hub Center View More

USA Electrical Certification Laboratory needed for IEC Testing: X-Ray Film Digitizer Equipment IEC 60601-1 3rd Edition and a test report and CB certi... View More

Materials Laboratory needed for Lubricants Testing: Special tests to be run in typical lubricants lab. Method description will be supplied, along wit... View More

India Electrical Laboratory needed for RFI and EMI LED Tube Light testing and certification of Led Tube light I.e.T8 led tube light. 2 numbers. 1) Min... View More

India Physical Laboratory needed for FIRE RESISTANCE TESTING as per IMO FTP Code Part 3 Resolution A.754 (18)A.III & A.IV, International Structural Fi... View More

USA materials laboratory needed for ANSI Testing to gain an ANSI Z359 fall protection certification for a single product that is a combination of exis... View More

Large Automotive Company needs India Physical laboratory for Environmental Conditions and Test Procedures for Airborne Equipment Testing, Icing testin... View More

USA Mechanical Laboratory needed for ANSI Testing Full testing to ANSI B71.4, Commercial Turf Care Equipment - Safety Specifications
4 machines
Ful... View More

Electrical Laboratory needed for lightning conductor testing in building.


View More

Safety Laboratory needed for BS EN Testing to BS EN388 Protection against Mechanical Hazards and BS EN422, Rubber and plastics. Machines. Safety
View More

International mining company producing aggregates for the construction needs oil laboratory for scheduled oil sampling (SOS)of our crushing and screen... View More

USA Laboratory needed for GPA Testing to GPA 2130 and GPA2106, extended analyisis of oil and gas samples collected from produciton equipment View More

Industrial Hygiene Laboratory needed for hearing testing. hearing tests in my workshop area to find out what type of hearing protection is needed" View More

FDA GMP Compliant pharmaceutical laboratory needed for USP Dissolution Testing. Laboratory must have equipment to run USP Apparatus 7 View More

Physical Laboratory needed for BS Safety hazard testing to BS EN 168:2002, Personal eye-protection. Non-optical test methods. Clause 16 and ISO 4855-1... View More

USA Food Laboratory needed for ANSI 51 Testing. NSF/ANSF 51 (National Sanitation Foundation - Food Equipment Materials View More

Life Science Company needs Canada Medical Electrical Laboratory for International Electrotechnical Commission IEC Testing to IEC60601-1:2005,Medical E... View More

Physical Laboratory needed for Underwriter's Lab UL fire testing to UL1709 Rapid Rise Fire Tests of Protection Materials for Structural Steel: test de... View More

West Coast UL Electronic Certification Laboratory needed for UL Certificaiton testing to Certify an inverter to U.L. 1741,Inverters, Converters, Contr... View More

Europe Electronic Consumer Products physical laboratory needed for crash testing on our equipment that is after the test made ​​no cracks... View More

Electrical Laboratory needed for IEC Testing: IEC 61230, Portable equipment for earthing or earthing and short-circuiting View More

California Electrical Laboratory needed for IP Testing: Water Proof testing (IPX standard, Ingress Protection Rating) is needed to be done on a fully... View More

Mexico certification laboratory needed for electrical reliability Testing for equipment:

Brand: Monster Power
Model: HDP 1800
Description: High d... View More

India Materials Laboratory needed for ISO testing or ASTM Testing: UV-B exposure (Atlas equipment)on Tape(Belt) nylon 26mm wide, 3mm thick View More

USA Analytical Chemistry Laboratory needed for elasticitiy Testing of the surface tension (elasticity) of the pharmaceutical surfactant Pulsating bubb... View More

ELECTRONICS CERTIFICATION LABORATORY NEEDED: CE LABORATORY FOR ELECTRICAL CERTIFICATION OF OUR POWER SUPPLY(SAFETY & EMI/EMC) WE ARE MANUFACTURER OF E... View More

West Coast USA Virology/ bioanalytical laboratory needed for virology cell line testing. baseline and follow-up testing of control versus treated hum... View More

Electrical Laboratory needed for electrical resistivitytesting of pure Copper (20 °C) 16.78 nΩ·m. The Copper pen-size bar was already treated th... View More

Eastern USA physical laboratory needed for impact testing, ball and Joint Outdoor power equipment, Mowing Deck on a lawn and garden type tractor. View More

Mechanical laboratory needed for abrasion testing by using ABREX equipment. Test item : IEC60068-2-70 Test component : Knob of Automotive interior pa... View More

Product Safety Laboratory needed for materials compliance testing to ANSI/ISEA 107-2010 International Safety Equipment Association,American National S... View More

Consumer Products Laboratory needed for mosquito repellent study for repellency testing (arm in cage) complete protection time of our mosquito repelle... View More

Europe mechanical and electrical laboratory neede for EN-50483 (complete) mechanical testing and electrical testing of cable equipment for isolated LW... View More

Southwest Europe analytical chemistry laboratory needed for product analysis, problem investigation/ trouble shooting and failure analysis areas for ... View More

Pharmaceutical Microbiology Laboratory needed for bacterial endotoxin testing of distilled water for use as injectibles. Water Purification Project fo... View More

United Arab Emirates Physical Laboratory needed for waste wood testing to analyze the "Lower Heating Value" (lower colorific value) of waste wood and ... View More

Manufacturers of safety equipment and clothing needs electrical laboratory for electrical arc testing. What is the time required for testing? The ma... View More

New Jersey Contract Preclinical Laboratory needed with equipment and experience performing rat pulmonary arterial hypertension model(s)." View More

OSHA compliant ANSI Manufacturer manufacturing a new hearing protection device needs sound testing and also OSHA compliant certs and NRR rating. View More

California EPA Analytical Chemistry Laboratory needed for VOC and EPA particulate matter testing: 2.5 Particulate Matter
the annual requirement outl... View More

East Europe Telecommunications Laboratory needed for R&TTE Testing Intruder alarm system control panel R&TTE Radio & Telecom Terminal Equipment Direct... View More

Texas Electrical Laboratory needed for UL Testing: ul61010-1 Standard: Safety Requirements for Electrical Equipment for Measurement, Control, and Labo... View More

USA medicinal chemistry laboratory needed for conducing nutrient heat stability testing on botanically based dietary ingredients with a lab that utili... View More

India Materials Laboratory needed for ASTM Testing: Melting Temperature, degradation mechanism, calculating molecular Weight by gel permeation chromat... View More

USA preclinical laboratory needed for preclinical contract influenza vaccine protection studies. N eed a poultry vivarium View More

Electrical laboratory needed for Outdoor single pole hook operated Disconnect Switch testing: Rating: 11 KV/ 15 KV, BIL : 110 KV, Continuous Current R... View More

Food Nutritional Laboratory needed for Lactic acid testing to IFU methods using ONLY KONELAB equipment View More

India, Asia FDA GMP Analytical Chemistry Laboratory needed for Sunscreen Testing: Sun Protection Factor, UVA Protection Factor, Boot star rating, Crit... View More

Acoustics Laboratory needed for safety rating testing of earplugs (silicone) rated for hearing protection. Do you do this type of testing. If so, wha... View More

ISO 17025/ILAC certifed laboratory needed for wild freshwater Asian carp testing.

1. Laboratory issued detailed and full test report according to... View More

Air treatment Equipment Manufacturer needs Microbiology laboratory for viral efficiency testing of air sterilizers efficiency of our air sterilizer fo... View More

Physical Laboratory needed for High Current Testing (Lightning Currents) Facilities. Could you please send me the details. Thanks in Advance. View More

Bioanalytical Laboratory needed for Large scale analysis of soluble sugars. Enough capacity to analyze 1000+ samples in 2 weeks with an average run ti... View More

California Microbiology Laboratory needed for Medical equipment sterility testing. Roughly 4/mo. View More

Contract Research Organization (CRO) needed that has large scale production capacity for the analysis of soluble sugars.

The CRO must have:

1... View More

US FOOD CERTIFICATION LABORATORY needed for third party certification testing of food equipment used as part of a seasonal or annually-renewing health... View More

Vermont Microbiology Laboratory needed for microbial contamination testing (yeast, mold, bacteria) in environment, kettles and production equipment. View More

Large office equipment manufacturer needs electronics laboratory for Conductivity measurements of powders measure the conductivity of 3 laser beam pri... View More

Saudi Arabia construction and building, engineering laboratory needed for vibration test of a building in which Air Conditioning Equipments are operat... View More

Asia Mechanical Laboratory needed for NF C 33-040 Mechanical Load Test. Insulated cables and their accessories for power system;
Suspension equipment... View More

Mechanical Product Safety labroatory needed for ANSI fall protection testing of fall protection device to OSHA standard 1926.502 and possibly ANSI sta... View More

Sports equipment Mfg needs textiles laboratory needed for textile testing for pressure. I need to test graduated compression apparel in mmHg. If so, w... View More

Canada or USA Certification Laboratory needed for ASTM safety certification of Fall Protection, Personal Protective Equipment to ASTM Z359.1 View More

Canada, UK or USA physical laboratory needed for 16 CFR 1610 (flammability) and Compliance with EN 13795 for Surgical Equipment Drapes View More

USA Physical Laboratory needed for Called protection test IP69K this uses high pressure heated water aimed at the test item at 4-5 different angles. W... View More

Medical Device Electrical laboratory needed for IEC testing to:
IEC 60601-1:1988 + A1: 1991+ A2:1995 - Medical electrical equipment: General
r... View More

USA Consumer Safety Certification Laboratory needed to Test and certify New Eyewear Protection product to allow sale and distribution in the USA View More

USA, Canada, Europe Product Safety Laboratory needed for UVA / UVB protection factors testing, waterproof effect testing, photostability testing View More

USA Analytical Chemistry Laboratory needed for a dust measurement testing on a powdered product in ppm using a Heubach machine or similar testing equi... View More

China or Taiwan ANSI Consumer Products Safety Laboratory needed to test for fall arrester of Personal Protective Equipment as per ANSI/ASSE Z359.1-200... View More

India NABL DIN ISO Electrical/Mechanical Laboratory needed for product safety testing as follows:
1) Low Voltage Directive 2006/95/EC amended ... View More

India/USA Environmental Laboratory needed for testing as per DO-160F: Environmental Test Procedures for Airborne Equipments View More

AAALAC, FDA Preclinical Contract Research Organization needed for neuroprotection study involving radiation-induced brain damage in rodents.
Basic be... View More

Northwest USA Electrical Laboratory needed for DO-0160F Electrical/EMI/EMC Testing for Cockpit control Boxes. Rotorcraft Mission Equipment. View More

Eastern USA metallurgical labroatory needed for trace metals analysis 10 samples of carbon inks that were made on a piece of equipment where the suppo... View More

Large electrical mfg needs Brazil Electrical Laboratory for IEC Lightning protection system testing for wind blades. Test to include high voltage atta... View More

USA Consumer Products Safety Laboratory needed for ASTM testing of home playground equipment as per astm f963-08 astm f1148 and 16cfr. View More

USA, Asia, Europe Consumer Products Safety Laboratory needed for performance tests to residential A/V furniture Stability, Strength, Tip Over, Mechan... View More

Analytical Chemistry Laboratory needed to set up temporary mobile lab at Palouge Site Feed Processing Facilities and provide Laboratory Testing appara... View More

US electrical laboratory needed for electrical arch flash protection testing of gloves View More

USA ASTM/ISO/DIN Metallurgical Laboratory needed for thickness calibration standards for carbon steel. Required standards for use in generating second... View More

Materials Laboratory needed for fabrics protective testing to NFPA2112 standards. Our fabrics our used in Europe for heat & flame protection and metal... View More

Saudi Arabia FDA Medical Devices Laboratory needed to test for Samples which are collected normally during inspection at the port of entry or at in... View More

ISO ANSI Laboratory needed for safety temperature vibration test for hand protection. View More

Large Automotive Safety Equipment Manufacturer needs Southwest USA Materials Laboratory for testing in accordance to ANSI Z359.1 CSA Z259.2.2 CE 360 a... View More

North America ANSI Mechanical Laboratory needed to test the integrity of turbine flow meter diaphragms between fluid pressure and electrical equipment... View More

China ASTM Materials Laboratory needed for High Temp Nylon and HDT test as per ASTM D 648 - Equipment must be capable to heated up to 320 deg c+ View More

CSA/ASNI Laboratory needed for testing Safety Equipment/Fall Protection/Harness and Lanyards -Looking for 50 plus items for approval View More

Dallas ISO, US EPA Materials Laboratory needed for ASTM Testing reactor, waste and other related parameters. Our company designs, manufactures and sup... View More

Calgary, Alberta EPA Environmental Laboratory needed for supplying equipment (desorption tubes) and then testing them for 4-Phenylcyclohexene using a ... View More

Thailand Manufacturer for air dryers and filters needs ISO Medical Equipment Materials Laboratory to test medical vacuum filters as per HTM 2022. View More

Europe Materials Laboratory needed for testing polymer samples for antioxidant measurement. Unfortunately we don't not know which antioxidant were use... View More

USA/Canada HIRF and Lightning test lab needed for RTCA DO-160 testing: RF conduced susceptibility (BCI), RF Radiated susceptibility(HIRF)Cat G PM and... View More

India ASTM Microbiology Laboratory needed for Deodorant Efficacy - In vitro time kill test as per ASTM E2315 to generate data for claim substantiation... View More

Electrical Laboratory needed for IP-41 eletronics testing electronic console for IP - 41 Protection class View More

ASTM Packaging/Mechanical Laboratory needed for the following testing:
SEQUENCE: 1 ELEMENT: A Manual Handling Distribution Simulation Hazards incurre... View More

Large Pharma needs Bioanalytical Laboratory for a rapid method test for the quantization of a 7-carbon monosaccharide in a raw material matrix (fruit)... View More

USA ANSI Laboratory needed for testing of finished products for compliance with ANSI/ASSE A10.32-2004:
Fall Protection Systems View More

USA Mechanical Laboratory needed for biomechanical testing of undergarments containing padded foam for hip protection View More

Large Company in Africa needs PPE Testing Laboratory in Doula, Cameroon to test and certify PPE equipment every 3 months. Equipment includes overalls,... View More

India IEC Laboratory needed for testing as per IEC 61373,wt of equipments with fixture is 3,500 kg View More

USA Physical Laboratory needed for testing Polish Stone Value of coarse aggregate in accordance to ASTM, recommend the use of BS Series/doc. No
BS BS... View More

Philippines, Asia, India Preclinical Contract Research Organization needed for In Vitro Sun Protection Factor (SPF) testing of at least 6 samples. View More

Europe RTCA Laboratory required for testing Aviation system level HIRF & Lightning in accordance to RTCA DO-160F Section 22 XXK55RTCA DO-160F Section ... View More

Mumbai Metallurgical Laboratory required for Ferroxyl test on a stainless steel equipment to find out iron contamination View More

USA Product Safety Laboratory required for Testing for ANSI Z-89.1-2009 - Industrial Head Protection View More

Product Safety Laboratory required for testing industrial head protection according to ANSI Z89.1-2009 View More

Midwest USA Mechanical Laboratory required for 220 lbs. drop test per ANSI/ASSE A10. 32-2004 on personal protective equipment View More

Mumbai electrical laboratory needed for IEC Testing of electronic equipment as per IEC
View More

West Coast Bioanalytical Laboratory needed for Inulin and oligo-Saccharides testing:
Laboratory needs HPAE chromatographic equipment coupled with a ... View More

Montreal NETA laboratory needed for AIS Acceptance Testing: resistance test, relay synchronization and protection (including calibration and configura... View More

US laboratory for certification of lifting appliances for lifting beams. Typical of CDE equipment pull test and NDE test View More

West Coast laboratory to test a "lightning counter" device by sending a pulse to review the performance of the device. The pulse must past trough the ... View More

Large Medical Device Manufacturer needs Arizona Medical Device Laboratory needed for Equipment sterilization Testing View More

Canada Textiles Laboratory needed for testing fabrics for the UV protection index View More

USA Preclinical Contract Research Organization needed for intravenous immunoglobulin (IVIG) In vivo and in vitro efficacy studies by mouse protection... View More

India Physical Product Safety Laboratory needed for Mechanical Shock & Vibration Test with dummy load, Ingress Protection (IP-55),& Pressure test at 5... View More

Optical laboratory needed for optical testing aspherical optical lens with Taylor Hobson TalySurf equipment View More

Europe FDA GLP CRO needed for Clinical Study, in-vivo Challenge Protection Study (efficacy or potency or immunogenicity testing ) in poultry chicks f... View More

Mechanical Laboratory needed for thermal, combustion testing, glycerol combustion experiments and would like to measure the acrolein emission in the e... View More

Physical Laboratory needed for NFPA Testing and ASTM Testing of electronic equipment under NFPA 130, ASTM E 162 and 662. View More

Analytical Chemistry Laboratory needed for identification testing of powder used in Earthing systems for cathodic protection. This powder is mainly ce... View More

Eastern USA Physical Materials Laboratory needed for polyurethane testing, Stiffness of .142" OD Polyurethane tubing. Specification: 15,000 PSI maximu... View More

Electrical Product Safety Laboratory needed for IEC61643 testing of surge protection devices to IEC61643 class 1 and class 2. View More

Singapore TL244 Materials Laboratory required with accredited certification to conduct a Salt Spray Test for Cylinder Tube for Power Steering componen... View More

Analytical Chemistry Laboratory needed to use analytic equipment to determine the percentage crystallinity of plastic. View More

USA, KOREA, CHINA ACLASS CONSUMER PRODUCT SAFETY LABORATORY NEEDED FOR DOLLS TESTING COMPLYING WITH U.S. CONSUMER PROTECTION SAFETY COMMISSION REQUIRE... View More

Canada Preferred Mechanical and Enviromental Laboratories required for:
1-Mechanical shock to 270 pounds system to ANSI N42.43-2006 standard
2- Dust... View More

FDA GLP Analytical Chemistry Laboratory needed for quantification N-nitrosoglyphosate in Plant Protection Product containing Glyphosate View More

India EN 60601-1-8 Medical Electrical Equipment Laboratory required for Electro surgery equipment to be tested as per EN 60601-1-8 View More

Asia/USA/Canada FDA Biomedical/Mechanical Laboratory required for testing AS5356-1:2004 Anaesthetic and respiratory equipment - Conical connectors: Pa... View More

Toronto Canada FDA Microbiology Laboratory needed to test the bacterial count of sports equipment before and after a cleaning procedure View More

Canada ANSI C119 Electrical Laboratory required for testing Electrical Insulating Tube, Cold Shrink, 600 Volt, 3/0 AWG, 90Deg. C, 11â?? Long (10/Pack)... View More

USA Microbiology Laboratory required for testing several textile products for protection against H1N1 or other viral strains. View More

USA Mechanical/Materials Laboratory needed that can test according to DIN 40050-9 Protection against foreign objects, and water View More

Brazil Acoustics Laboratory required for Random Vibration Test:
SPEC 18-2155 - item 11.1.1 / 9.1 / 11.2 - All IVECO
Fluid: 18-1825-A000 / Tutsol 4... View More

Eastern USA ASTM - ISO Materials - Product Safety Testing Laboratory required for Flammability Testing, Toxic Elements Testing, Ignitability Testing, ... View More

China (near Suzhou City) Avionics Laboratory needed for
DO-160 Environmental Conditions and Test Procedures for Airborne Equipment View More

Asia, preferable Singapore Mechanical Laboratory needed to do composite panel/coupon testing, Mechanical, Fire and Lightning(optional)test. View More

Laboratory required to test Lightning Strike 1 and 10 MHz Damped Sine at 4kA
Pin Inject View More

Canada Product Safety Laboratory needed for CSA Z195 and ASTM F2413 Testing of Footwear protection components.
Lab to be in the greater Montreal area... View More

India Electronics Certification Laboratory needed for DGS&D testing of CCTV cameras, Hand Held Metal Detector, vibration sensors based alarm system, p... View More

Government needs West Coast USA Histology laboratory for histological testing of juvenile Chinook salmon samples for locations of incisions created to... View More

Asia Mining Laboratory needed for geomechanical testing for mineral dressing, exploration, rock analyze, geomechanics, anythings about mining software... View More

USA ASTM Analytical Chemistry Laboratory needed to determine the % of aluminum in a powder blended batch using hydrogen evolution. Need to know method... View More

Large Agriculture Equipment Manufacturer needs Minnesota Occupational Health for NIOSH asphalt paver ventilation test. View More

Large Pharmaceutical Manufacturer needs UK or EU FDA GMP Analytical Chemistry Laboratory for investigation re: counterfeit medicines. Specialized equi... View More

USA Toxicology Preclinical Contract Organization needed -
We have a library of compounds with potential neuroprotection. We are considering pre-scree... View More

New Jersey ASTM Materials Laboratory required for product safety testing of equipment. View More

Seattle, WA Analytical Chemistry Laboratory needed to measure osmolarity of solutions. Would prefer testing requires < 1 mL volume of each sample. ... View More

Consumer Products Safety Laboratory needed for Consumer Safety Protection Testing of 100% cotton diapers for babies require GCC to satisfy the Consum... View More

USA Materials Laboratory required for Optical Testing. I work for a military communications equipment manufacturer and we are designing a new product... View More

India materials laboratory needed for testing petroleum products for determination of critical properties,latent heat, vapour pressure,enthalpy, calor... View More

USA Analytical Laboratory needed for testing Activated Alumina products. SPX dehydration & Filtration is a manufacturer of compressed air & gas dryin... View More

USA, Europe, Asia Analytical Food Laboratory needed for lycopene exraction from tomato - raw materials, equipment, solevents,steps or process for thi... View More

Any Location ISO 7886-4 Laboratory Equipment Testing Laboratory needed for testing a syringe with a re-use prevention feature to ISO 7886-4. View More

San Jose, CA Occupational Health and Safety laboratory needed for fit testing & associated tests required for respiratory protection. Both full and 1... View More

US Product Safety Laboratory needed for ANSI Testing of Personal Protective Equipment PPE Manufacturing company requires ANSI Z87.1 testing, ANSI Z359... View More

USA Product Safety Laboratory needed for safety testing of medical equipment (colposcope) View More

Midwest USA Bioanalytical Laboratory needed to perform precision and accuracy testing on several blood glucose monitoring systems. We would provide t... View More

NJ Licensed Clinical Laboratory needed for testing blood from finger stick procedure utilizing Cholestech LDX equipment in a corporate health fair set... View More

ASTM Materials Laboratory needed for ISO, DIN Odor testing about plastic either human sensory or equipment. View More

USA physical weathering laboratory needed for GR 1089 testing lightning effects on telecommunications equipment View More

Europe Toxicology Laboratory needed to measure a neurotransmitter in zebrafish (total tissue) after administration of both a neurotoxine and a neuropr... View More

Materials laboratory needed for analysis: EN 12192-1 Products And Systems For The Protection And Repair Of Concrete Structures - Granulometry Analysis... View More

Analytical Chemistry Laboratory needed for method development of an alternate method to AOAC method to detect Lactose in Milk. The method requires a s... View More

China or Canada Textiles Laboratory needed for Fabric UV Protection Factor Testing in hats. View More

Accredited USA (eastern) microbiology lab needed to test effectiveness of infection control equipment based on low concentrations of hydrogen peroxide... View More

Mechanical Laboratory needed for Product concept evaluation and optimization requiring: knowledge and equipment related to low pressure/flow air deliv... View More

Electical Laboratory needed to Inspect and certify electrical safety of dialysis solution mixing and delivery equipment.
View More

Product Safety laboratory needed for UL/CE certification testing of Personal Protection Equipment EN-12275 Connectors/UIAA-121
1. strength in main d... View More

Mechanical laboratory needed for testing a full body harness to Personal Protective Product Directive. Body Harness distributes fall forces throughout... View More

Mechanical lab needed for testing a full body harness to Personal Protective Product Directive. Body Harness distributes fall forces throughout the b... View More

FDA GMP Laboratory needed to determine oil droplet size in final pharmaceutical product. Product is submicron emulsion with oil droplet size below 1 m... View More

Analytical Chemistry laboratory needed to test ethanol and quaternary ammonium compounds content of a Disinfectant Spray product. We have the methods ... View More

Electronics Microbiology laboratory needed for MIL-STD-810F Fungus Resistance Test. Equipment shall not support Fungus growth. It should be resistent ... View More

Electrical laboratory needed for equipment to be tested in all services for the electrical field or power electronics field View More

Materials ab needed for ASTM Testing: Impact attenuation of surfacing materials within the use zone of playground equipment View More

Biomedical lab needed for the following ASTM testing:

1.) ASTM F2101-01 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BF... View More

Bioanalytical laboratory needed for clinical testing of a nutraceutical formulation for anti-aging of the skin. It will be sold for internal use only,... View More

Preclinical laboratory needed for preclinical pharmacology NCE screening using a rat model of respiratory depression. Must be able to use Buxco (or e... View More

Toxicology laboratory needed for toxicology cardio protection from doxorubicin cardio toxicity in animal model. View More

FDA GLP / GMP microbiology laboratory needed for testing and small batch manufacturing of an antimicrobial polymer in development. We have been reque... View More

Mechanical Laboratory needed for testing railway equipment to determine wear on equipment View More

FDA materials laboratory needed for spectral transmittance testing of eye protection product made of film that is used during indoor tanning. The prod... View More

Mechanical laboratory neeeded for testing according to standard PSA (Peugeot) Matrices: Braidings tubular,
glass fibre + silicone (see Doc. in enclos... View More

Mechanical laboratory needed for Carb Tier III evaporative emissions testing on motorcycle small engine application. Diurnal testing required for fuel... View More

Analytical Chemistry laboratory needed for ASTM lubricant analysis, crude oil assay services.
- Analysis of lubricants for predictive and preventive... View More

Electrical laboratory needed for 11KV H.T. Switchyard Equipments precommissioning testing on site. Tests like CT,PT testing, transformer testing, H.T.... View More

Non-GLP Toxicology laboratory needed for antimicrobial effiacy studies in mice. Standard bacterial challenge followed by treatment and assessment of p... View More

Electrical Laboratory needed for measuring the power consumption of equipment under various operating conditions and arrangements. Provide independen... View More

Preclinical toxicology laboratory needed for in vivo animal protection testing against microbials and in vivo suspectibility test for antimicrobials View More

AATCC textiles laboratory needed for testing apparel for Ultraviolet Protection Factor View More

Mechanical laboratory needed for NEMA Ingress Protection (IP) testing for an enclosure of a drive which is to be conducted for our customer as per NEM... View More

Analytical Chemistry Laboratory needed for testing for formaldehyde using Entech Instruments' method and equipment.
View More

Electrical laboratory needed for ASTM testing of electrical line gloves and utility safety equipment View More

Analytical chemistry laboratory needed for formaldehyde analysis using Entech Inst.'s equipment and method View More

ISO electrical laboratory needed for equipment parameters testing (interfaces, signaling systems, protocols, transmission, operation and performance p... View More

Electrical laboratory needed for Electro magnetic compatibility survey testing. The survey environment includes the comms systems, microwave facilitie... View More

Accredited GLP laboratory needed for analytical chemistry pesticide testing a Plant Protection Product (Pesticide) Indol-3-butyric acid, a. physical ... View More

Mechanical laobratory needed for core analysis equipments. View More

ISTA packaging laboratory needed for packaging testing on corrugated carton protection for shipments via UPS, Fedex, USPS, Air, Ground (LTL). Assume t... View More

Analytical laboratory needed for Capillary Electrophoresis computerized testing of oil samplings, to test coolant components. The lab must also be abl... View More

Analytical Laboratory needed to perform Capillary Electrophoresis computerized testing of oil samplings, to test coolant components. The lab must also... View More

Physical laboratory needed for DO 160D testing "lightning" to a PWA

View More

Nanotechnology laboratory needed for AFM, TEM, SEM characterization of nanoparticles. Please let me know a price of AFM,TEM,SEM and other equipments n... View More

Bioanalytical laboratory needed for biopharmaceuticals process mixing studies for formulation equipment. We would need guidance on the testing requir... View More

EPA Environmental laboratory needed for USEPA # 23 . CFR 40 testing dioxins and furans taken from gas emissions samples. We have the equipment to sam... View More

FDA GMP and GLP microbiology laboratory needed for microbial environmental testing of Compressed Air, Room Air, Water, Equipment Surface, Finished Pro... View More

Toy Manufacturer needs product safety laboratory for ASTM (ASTMF1148) testing of home playground equipment View More

IEC electrical laboratory for testing the MCB,MCCB for our load centers and test the load centers complete according to IEC60898 and IEC60947-1 ,3 .... View More

Physical laboratory needed for testing the temperature of AWG34 copper wire, 0.0063" diameter, with varying amounts of electrical current loading on i... View More

Analytical chemistry laboratory needed for analytical water testing for tritium contamination of water and equipment. View More

Wastewater Plant needs analytical laboratory needed for testing of anaerobic digester gas for basic methane/btu/co2/nitrogen/h2s analysis. Also silox... View More

FDA GMP Food laboratory needed for nutritional analysis for comparison of foods cooked in food manufacturer's new equipment compared to foods cooked u... View More

Laboratories needed for AATCC, EN, BS, AS/NZS testing of sun protection factor or ultraviolet protection factor of fabrics and garments. View More

GLP Analytical chemistry needed in Canada for elemental analysis of a synthetic 28 aa peptide for patent protection View More

Manufacturer needs FDA, GMP Microbiology laboratory for long term microbiology testing including aerobic plate counts and coliform testing of food equ... View More

ISO Laboratory needed for testing Pesticide/insecticide ready to use, in liquid (DIFLUBENZURON - class benzoylureas - formulation OF ,60g a.i./l). Tes... View More

GMP and GLP Laboratory needed for validation of the cleaning and thermal disinfection of medical devices, by microbiology methods ISO/DIS 15883-1 (or ... View More

TBT testing: We would like to test water samples from marinas for TBT (Tributyltin) and other Organo-tin levels. We would collect the samples ourselve... View More

Std Aluminum over Copper Vacuum Metallization (PVD) Glass Coupon Characterization. Measure thickness, composition, and purity. 3 Coupons - 2 inch squa... View More

waste water analytical chemistry testing for titanium by Environmental Protection Agency 283.2 View More

Institute or Laboratory needed for electronic, plastic animal identification equipment. Performance evaluation and analytical testing of our plastic... View More

We are interested in perfoming a shelf life study (physico-chemical characterisation)
on a plant protection product based on a microbial pest contro... View More

Require a Oxford Lab-X 2000 or equivalent XRF ED equipment for determination of S & Ca in metal working fluids for quality assurance purposes. Energ... View More

Microbiology and immunology laboratory needed to perform allergen testing and Dust mite protection testing View More

Physical laboratory needed for direct and indirect lightning strike tests done to see the durability of our highly condensed steel product when it is ... View More

Clinical laboratory needed for Patch test (in vivo)on Human volunteers
Photo-patch test
toxicology -toxicity and photo-allergy potential in Human
... View More

Need to rent the required equipment to perform clinical toxicology testing of human specimens on site in Texas. View More

Need a laboratory that can perform sun protection factor testing View More