Laboratory Outsourcing and Scientific Sourcing Center

Accredited Automotive Laboratory needed for GMW testing of polyethylene cross linked foam used in automotives to GMW 15063 Polyolefin Foams for General Applications - Non-cros...

Southern California Electronics, Automotive Laboratory needed for testing electronic device that claims to increase MPG and reduce emissions.

USA Analytical Chemistry Laboratory needed to test 1 sample of Dextron III automatic transmission fluid for the presence of ethylene glycol(antifreeze).

ISO Mechanical Laboratory needed for engineering performance testing (Hot air impulse testing) for hose

Physical Laboratory needed to conduct a heat resistance test on a finished cowl top. Test needs to occur in a Thermocycle Machine , capable of 2m x 1m x .5m capacity and can ...

USA Metallurgical/Analytical Chemistry Laboratory needed for testing 2 small stainless steel parts to start (we are looking for long term lab partner for regular and ongoing l...

China Automotive Laboratory needed for EEC, Homologation test for diesel engines and OBD + NOX tests

MS Materials Laboratory needed for testing of polyurethane foam per spec MS 300-55 VOC

North America ISO Physical Laboratory needed for testing as per ISO 16232, technical cleanliness of metallic engine parts
particle size and quantity, high pressure rinse

Canada, Ontario ASTM Analytical Chemistry Laboratory needed for testing lubricant as per ASTM D5800 - NOACK Volatility

Europe DIN Environmental Laboratory needed for UV-stability testing according DIN 75220. Installation area according Table 3 (Indoor).

USA A2LA ISO Automotives Laboratory needed for Radio testing using CAN ISO16845 test method. ISO 16845 provides the methodology and abstract test suite necessary for checking ...

USA EPA Environmental Laboratory needed for testing automotive exhaust samples as per EPA Method TO-11A, number unknown.

Automotive rear view mirrors manufacturer needs Materials Laboratory to perform roughness testing on the ground edge of the mirror. Mirrors range in size, and average 2 mm in...

ISO Metallurgical Laboratory needed to fabricate rectangular sheet corrosion monitoring test specimens from 3000 series rolled aluminum. Surface condition must be reproducible...

India Mechanical Laboratory needed for testing polymer for Tensile, Compression, Shear, Uniaxial cyclic at Quastatic,Shear relaxation at Quastatic -High strain rates (from Qua...

Midwest USA ASTM JIS Automotive Laboratory needed for testing chrome plated plastic a parts on Ford WSB-M1P83 B2, Chrysler PS-8810, Nissan M4063 [2001] Cr2P

ISO Metallurgical Laboratory needed for quantitative elemental depth profiling of stainless steel coupons - mapping of Fe, Cr, Ni, Mo, Mn, O, C to a depth of less than 100 nm....

India Metallurgical Laboratory needed for case hardening automotive part testing.

USA EPA Analytical Chemistry Laboratory needed for VOC emission testing and providing certificate of results. Our product is a mixture of chemicals such as Aluminum and potass...

China Automotive Materials Laboratory needed for testing Automotive Part - Headlamp Norm Fiat 9.93334

India Petroleum Laboratory needed for testing and calculation of cetane number of biodiesel samples to which cetane improvers are added.

India Automotive Materials Laboratory needed to test complete automotive exhaust system, catalytic converter etc for hot vibration, hot fatigue, and thermal fatigue testing.

India Mechanical Laboratory needed for reliability and durability testing of exhaust system .

USA Analytical Chemistry Laboratory needed for UN flashpoint / Boiling Point testing of solvent based coating for Flash point/Boiling point

South Carolina ISO Automotive Materials Laboratory needed for testing as per ISO 16232, technical cleanliness of metallic engine parts

USA Automotives Laboratory needed to conduct Sound Loss (STL) Pass-Through Evaluation Test on 7 samples of the same A/T Cable Pass through grommet as per GMW14178.

Materials Laboratory needed for ABS Testing - Burn Test - 1472 Degree F burn test for 35 minutes

Singapore Automotive Materials Laboratory needed for performance & emissions testing with biodiesel fuel (EURO IV engine, static & road test).

USA A2LA or ISO 17025 Materials Laboratory needed for Ignition residue Testing as per VDA 675 130. 6 samples (rubber compounds).

Europe ASTM Mechanical Laboratory needed for testing as per ASTM D 1335 at room temperature and 80°C on tufted carpets for automotive application

Materials Laboratory needed for properties testing to confirm the liquid wax property.

Analytical Chemistry Laboratory needed for DL testing automotive fuels to Portuguese Legislation (DL 89/2008).

Materials Laboratory needed for SAE cable testing cable, SAE J1118: 6.7 Fluid compatibility.

Mechanical Laboratory needed for impact attenuation crash testing on the crash box assembly of a formula race car.

NFPA/ASTM Materials Laboratory needed for testing as per NFPA 1192/E84 ASTM E84 (Class B)

India Analytical Chemistry Laboratory needed for testing on Liquid wax material as follows:
1.Specific gravity
2.Viscosity
3.Non Volatile residue

Mechanical Laboratory needed for testing an alloy casting to determine why the casting cracked after fiing to a automobile Tension Pulley Bearing. It's not a large product app...

Automotives Materials/Mechanical Laboratory needed for Mirror System Key Life Test - Lifecycle test with environmental profiles

Poland Automotive Products Manufacturer needs Europe Mechanical Laboratory for testing as per STD 423-0036 "Impact strength, falling-weight method"

Europe Automotive Materials Laboratory needed to test a painted passenger airbag cover according General motors specification GMW3133

India ASTM Physical Laboratory needed for vibration and thermal testing of automobile part (Skid Plate)

Material : AL-1100 (Aluminium)

South Africa Automotive Materials Laboratory needed to conduct a fogging test for DIN 75201 according to Method A (Reflectance %) & Method B (Fravimetric fogging Mass depositi...

Leading manufacturer of Road Speed Limiter (Autograde) Devices for automobiles needs Mechanical/ Materials Automotive Laboratory for the following testing as per AIS 018(ARAI)...

Toronto GMP, UKAS Mechanical Laboratory needed for ASTM Testing, Mechanical friction testing of a nanotech engine lubricant composition within an engine.

Global Trading Company from Myanmar needs Automotives Materials Laboratory to test Auto Spare Parts.

Europe ISO Analytical Chemistry Laboratory needed for testing PAH content in Tires using ISO 21461 in accordance to REACH Guidelines.

Toronto Canada Mechanical Laboratory needed for testing broken Shaft adapter, probably due to rotational bending fatigue. 3-4 samples available, one failed, 2-3 control sample...