Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us. Please log in to see more.
Need to test Nickel Boron (NiB) alloy for thickness, hardness, and wear resistance.
We're looking to test an aluminum part to determine its alloy grade.
Would like to get a quote for testing a 305 Annealed stainless steel strip to AMS5514J (Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (305) Solution Heat T...
BUDGET APPROVED ($1,000-$2,000)
Need magnetic permeability testing in the USA per ASTM A342M (Standard Test Methods for Permeability of Weakly Magnetic Materials) met...
MULTIPLE TESTING
INDIA chemicals laboratory needed for gas leak detector fluid per the below-mentioned tests:
1. MIL-PRF-25567 (Oxygen Systems)
2. NFPA ...
Contract laboratory needed for machinability testing of brass alloys.
INDIA Third-party metal testing facility needed to determine the alloy composition of a fabrication piece.
CANADA metals and minerals testing laboratory needed to analyze metals, minerals, coal, coke, non-ferrous and ferroalloys, and fertilizer in five samples a week per the ASTM s...
MULTIPLE PRODUCTS
Metallurgical Laboratory needed for complex permeability measurements of various steel alloys for comparative analysis. We'll provide test samples in the fo...
URGENT
LONG TERM TESTING
Contract Metallurgical laboratory needed for SAE and FEPA testing of steel shot/brown fused alumina as per the following:
1. Hardness (HV/HRC fo...
MULTIPLE TESTING
ISO / IEC 17025 Metallurgical Laboratory needed for Antimony (Sb) analysis in steel chips as per ASTM E350 Standard Test Methods for Chemical Analysis of Ca...
MULTIPLE PRODUCTS
MULTIPLE TESTING
Contract Metallurgical Laboratory needed for various metals testing (eg aluminum, lead, zinc, etc) as per the following list:
- Assessm...
MULTIPLE TESTING
Materials Laboratory needed for ASTM testing of stainless steel welded plates to ASTM A923 Standard Test Methods for Detecting Detrimental Intermetallic Pha...
Chemistry laboratory needed to provide chemical composition & impuries testing for silver Brazing Alloys
MULTIPLE PRODUCTS
MULTIPLE TESTING
Contract Laboratory needed for alloy oxide samples testing for electrical conductivity measurement. They will come in pellet with porosity...
Contract Laboratory needed for ballistic testing of AZ31B Magnesium alloy.
URGENTLY NEEDED
MULTIPLE TESTING
Geology Laboratory needed to find amount the amount of rhodium, palladium, platinum etc. in a mining sample.
LONG-TERM TESTING
Metallurgical Laboratory needed for imaging 500-1000 metal alloy samples at 200-400x magnification with 100+ grains with twinning structure in each image
Chemical analysis in alloy tubes including P Phosphorous Analysis 1.Could you make this Analysis ?2.Could you please inform which is the cost per sample? And How Much time ...
MULTIPLE TESTING
Metallurgical Laboratory needed for DFARS 252.225-7008 chemical/ physical testing on Kovar materials.
Metallurgical Laboratory needed for ASTM testing of alloy to ASTM F 2004 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis te...
Contract Laboratory needed for AFM sample testing for Nanoindention, SEM , TEM, XRD of an alloy nanopowder with MgH2 ball milled at different time periods?Do you include disc...
SOUTH AMERICA LABORATORY
South America Laboratory needed for platinoids testing using these methods: 1-Plasma ICP, 2-AA, Atomic Absorbtion3-Fire assayPlease, let us know if ...
USA Metallurgical Laboratory needed for ICP-MS or GDMS testing of low ppm elements in high strength nickel base superalloy Inconel 718.
1) < 5ppm: Ag, Pb, Sb,
2) < 3ppm: S...
MULTIPLE TESTS
Contract Industrial Laboratory needed for the following HVAC testing according to the following Test Standards:
■ MIL-PRF-25567 Leak Detector Compound, Oxyg...
MULTIPLE TESTING
Contract Laboratory needed for Gas Leak Detector testing:
■ MIL-PRF-25567 Leak Detector Compound, Oxygen Systems, Type I, -5 to 99°C (23 to 210°F).
■ NFPA...
USA LABORATORY
MULTIPLE PRODUCTS
MULTIPLE TESTS
USA Metallurgical Laboratory needed for NIST Traceable Precision measurement of 29 aluminum samples of thicknesses ranging f...
Contract Materials Laboratory needed for Magnetic permeability testing of EN24 Steel Material with 40-43 HRC. Request you to share the quotation for the same.
MULTIPLE PRODUCTS
Advanced Materials Company needs Contract Laboratory needed for thermal conductivity testing of metals and alloys.
MULTIPLE PRODUCTS
Materials Laboratory needed for thermal conductivity testing of metals and alloys.
USA Metallurgical Laboratory needed for ASTM testing of Alloys per ASTM F2004 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysi...
MULTIPLE TESTING
Contract Metallurgical Laboratory needed for material verification, hardness and tensile testing on 4130 steel alloy material.
USA Materials Laboratory needed for testing Nickel base superalloys under Low Cycle Fatigue in a corrosion environment (in flowing air+SO2 and sea salt contaminant).
Metallurgical Laboratory needed for creep testing facility for my research work for Alloy sheet materials.
USA LABORATORY
USA Metallurgical Laboratory needed for ASTM testing AVL alloy coating to ASTM B994 Standard Specification for Nickel-Cobalt Alloy Coating, Laboratory must be ...
USA LABORATORY
MULTIPLE PRODUCTS
MULTIPLE TESTS
Company disposing of the minerals and alloys needs USA Metallurgical Laboratory that has the ability to evaluate Prue Carbon...
INDIA LABORATORY
MULTIPLE TESTS
MULTIPLE PRODUCTS
India Laboratory needed for raw material process and finished goods metal testing for aluminum smelters and power plants...
Contract Laboratory needed for ASTM Nickel/Aluminum dry powder sample tested by AA for Fe, Co and Cu. We require a Detection limit of: Fe 0.0010 wt% or 0.10mg/L, Co 0.0005 w...
NADCAP Accredited Metallurgical Laboratory needed for NASM testing as per NASM 1312-13 made on Titanium alloy bars. The test as per NASM 1312-13 is normally made on fasteners ...
Contract Laboratory needed for development of a Stainless steel wipes and to quantify Its ingredients which include Hydrotreated light alkanes, dimethicone, and alcohol ethox...
Metals Company needs Contract Laboratory for IEC Testing to IEC 60068-2-5 Ed. 3.0 en:2018 ? Simulated Solar Radiation at Ground Level
MULTIPLE PRODUCTS
MULTIPLE TESTINGS
USA Metallurgical Laboratory needed for chemical content and alloy identification. of two parts including determination if the parts a...
Materials laboratory needed for Metallurgical and Chemical Composition Analysis (% of each alloy and grade identification) on 4 samples of 4 long carbon steel tubing that have...
Consumer Products Safety Laboratory needed for Jewelry testing for lead, cadmium and other metal alloys
Mineral Company needs Metallurgical Laboratory for testing concentrates at 75 mesh that I want tested for platinum and palladium or any of the PGM (Platinum Group Metals). Pre...
Metals Company needs Laboratory for elevated temperature tensile tests?
LONG-TERM TESTING Metals Laboratory needed to perform chemical composition, mechanical properties, and mechanical behavior tests on a variety of metal alloys. These tests may ...
Metallurgical Laboratory needed for characterization of alloys of FeSiBa and FeSiCeLa for REACH purpose including the following analyses
Ce:-Qualitative Analysis
X-Ray di...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, e-mail us or view more Laboratory Requests