Metals products maybe tested according to many different Metals Test Method and Standards including:
- ASTM A956/A956M-17a Standard Test Method for Leeb Hardness Testing of Steel Products
- BS 5950 for structural steel
- ASTM E53 - 07(2013) Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
- ASTM E45 - 18 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E37 - 05(2011) Standard Test Methods for Chemical Analysis of Pig Lead
- ASTM E23 - 16b Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E21 - 17 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials. ASTM E18 - 17e1 Standard Test Methods for Rockwell Hardness of Metallic Materials
- ASTM E8/E8M - 16a Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E10 - 17 Standard Test Method for Brinell Hardness of Metallic Materials
- ASTM E9 - 09(2018) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
- ASTM B368 - 09(2014) Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
- ASTM B362 - 91(2016) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
- ASTM B331 - 16 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- ASTM B330 - 15 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
- ASTM B212 - 17 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B154 - 16 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
- ASTM B6 - 13 Standard Specification for Zinc
- ASTM A720/A720M - 02(2016)e1 Standard Test Method for Ductility of Nonoriented Electrical Steel
- ASTM A370 - 17a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- ASTM A367 - 11(2017) Standard Test Methods of Chill Testing of Cast Iron
- ASTM A255 - 10(2014) Standard Test Methods for Determining Hardenability of Steel
- ASTM A108 - 13 Standard Specification for Steel Bar
- Carbon and Alloy
- Cold-Finished
- ASTM A99 - 03(2014) Standard Specification for Ferromanganese
- ASTM A90/A90M - 13(2018) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
- ASTM A392-11a(2017): Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
- ISO 17635:2010 Non-destructive testing of welds
- SS-EN ISO 17635:2010 Non-destructive testing of welds
- AS 2084-1987 Non-destructive testing - Eddy current testing of metal tubes
- ISO 4386-3:1992 Plain bearings - Metallic multilayer plain bearings - Part 3: Non-destructive penetrant testing
- ISO 9583:1993 Implants for surgery -- Non-destructive testing -- Liquid penetrant inspection of metallic surgical implants
- SS-ISO 4386-1:1994 Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing ofbond
- AS 3978-2003 Non-destructive testing - Visual inspection of metal products and components
- AS 4544-2005 Non-destructive testing - Eddy current testing for the detection of surface flaws
- GB/T 23910-2009 Non-destructive testing--Metal intensifying screens for radiographic testing
- GB/T 17455-1998 Non-destructive testing--Metallographic replica techniques of surface examination
- ISO 24497-3:2007 Non-destructive testing - Metal magnetic memory - Part 3: Inspection of welded joints
- ISO 3057:1998 Non-destructive testing -- Metallographic replica techniques of surface examination
- GB/T 21198.4 Determination of precious metals in precious metals jewellery alloys--Method using ICP spectrometry
- ISO 13314:2011 Mechanical testing of metals - Ductility testing - Compression test for porous and cellular metals
- AS 4036 Corrosion of metals - Dissimilar metals in contact in seawater
- ISO 8343:1985 Ferronickel - Determination of silicon content - Gravimetric method
- ISO 8044:2015 Corrosion of metals and alloys
- ISO 7583:2013 Anodizing of aluminium and its alloys
- ISO 7527:1985 Nickel
- ferronickel and nickel alloys - Determination of sulfur content - Iodimetric titration method after induction furnace combustion
- ISO 7526:1985 Nickel
- ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustion
- ISO 7524:1985 Nickel
- ferronickel and nickel alloys - Determination of carbon content - Infra-red absorption method after induction furnace combustionISO 7520:1985 Ferronickel - Determination of cobalt content - Flame atomic absorption spectrometric method
- ISO 7087:1984 Ferroalloys - Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
- ISO 6892 Metallic materials Tensile testing
- ISO 204:2009 Metallic materials - Uniaxial creep testing in tension - Method of test
- ISO 209:2007 Aluminium and aluminium alloys - Chemical composition
- ISO 196:1978 Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test
- ISO 148 Metallic materials?Charpy pendulum impact test
- EN 10217 Welded steel tubes for pressure purposes
- EN 10216 Seamless steel tubes for pressure purposes
- EN 10002 Metallic Materials - Tensile Testing
- ISO 7438 Bend Testing of Metal
- EN ISO 7438 Metallic materials. Bend test
- ISO 10113 Metallic materials. Sheet and strip. Determination of plastic strain ratio
- ISO 10447 Resistance welding. Peel and chisel testing of resistance spot and projection welds
- ISO 1099 Metallic materials. Fatigue testing. Axial force controlled method
- ISO 3327 Hardmetals. Determination of transverse rupture strength
- ASTM G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5?% Sodium Chloride Solution
- ASTM G50 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
- ASTM C876 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
- ASTM E9 Standard Test Methods for Compression Testing of Metallic Materials
- ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E2860 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
- ASTM E18 Standard Test Methods for Rockwell Hardness of Metallic Materials
- ASTM E45 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E517 Standard Test Method for Plastic Strain Ratio r for Sheet Metal
- ASTM E930 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size). EN 13480: Metallic industrial piping
- ANSI/ABMA 10A-2001 (R2008) Metal Balls for Unground Bearings and Other Uses
- ANSI/ABMA 11-1990 (R2008) Load Ratings and Fatigue Life for Roller Bearings
- AA ABH-21 Aluminum Brazing Handbook
- ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
- ISO 3543:1981 Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method
-