NEED LABORATORIES OR LAB SUPPLIERS?

ARE YOU A LABORATORY OR LAB SUPPLIER?

SUPPORT

Questions / Comments?
Call 1-855-377-6821or

Laboratory Requests

Most Recent minimum ignition temperature Laboratory Requests

Submit minimum ignition temperature Laboratory Requests

Contract Laboratory has received the following minimum ignition temperature Laboratory Requests which need to be fulfilled! These minimum ignition temperature Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their minimum ignition temperature Laboratory and Scientific Research. If you need a minimum ignition temperature Laboratory, please Submit a minimum ignition temperature Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Ceramics ASTM Fatigue Testing

Physical Laboratory needed for ASTM fatigue testing of ceramics in accordance to the following ASTM standards:

1. 1. ASTM C1361-10, Constant-A... View More

Low Dermatitis Clinical Trial on Sensitized Individuals

$100,000 BUDGET APPROVED FDA Clinical Research Laboratory needed for Clinical Trial on Low Thiuram, and/or Carbamate, and/or Thiazole Claim for Nitril... View More

High-Purity Copper Wire Testing

Laboratory needed for copper wire testing of high-purity wire copper (32 cm length and 8 mm diameter) so we need to analyze the Residual Resistivity ... View More

USP Zinc Oxide Testing

Pharmaceutical Laboratory needed for USP testing of Zinc Oxide USPfor

Assay (IC method)
Identification B (Peaks in Assay match)
Loss on ignitio... View More

Naphthalene Physical Properties

Large Chemical Company needs Oil Laboratory to provide a quote for the cost per temperature to determine the following physical properties of a naphth... View More

Concrete Thermal Properties Testing

Construction Materials Laboratory needed for concrete thermal properties testing under different temperature (29degree to 700 degree)
1. Thermal con... View More

Ground Nut Cake Testing

Agriculture Laboratory needed for confirmation testing of ground nut cake:

PROTEIN: 48% MINIMUM
OIL: 6% MINIMUM
MOISTURE: 6% MAXIMUM ... View More

Oregon Department of Transportation (ODOT) Adhesive Bond Strength

Large corporation needs Materials Laboratory for Oregon Department of Transportation (ODOT) testing of adhesive bond strength on Transportation Safety... View More

Phenol Formaldehyde Testing

Materials Laboratory needed for phenol formaldehyde testing to include the following 10 tests
1.specific gravity
2.water absorption
3.tensile stre... View More

Ointment Stability Testing

Laboratory needed for stability testing of ointment.

A few questions:
I believe I should only need the following?
* Heat at 45 and/or 50/55 deg... View More

PET Preform Failure Investigation Analysis

ISO 17025 Forensics Laboratory needed for failure investigation analysis of PET preforms. One PET preform has a grey shade and another PET preforms ha... View More

RTD Certificate of Conformity Testing

Importer needs UK ISO 17025 Accredited Laboratory for Certificate of Conformity Testing of RTDs Resistance Temperature Detectors View More

Tape Comparison Study

Materials Laboratory needed for adhesives comparison study testing for peel adhesion, temperature range for double coated tape for corrugated applicat... View More

Bulk Powder Analysis

Large Construction Building Materials Company needs Laboratory for Chemical/Physical Properties of a Bulk Powder Sample analysis:

Upper/lower flamm... View More

Industrial Propellant Testing

Industrial Laboratory needed for propellant testing to industry standard qualifications and certifications including:
1. Thermal stability and JANNAF... View More

Safety Lighting Temperature and Vibration Testing

Safety Lighting Manufacturer needs component tested for multiple temperature and vibration conditions View More

UL Plug/Receptacle Testing

Electrical lab neded for R&D testing on a plug/receptacle at 1,000VAC 3ph, up to 200A continuous, with short term (locked rotor/magnetizing currents) ... View More

Electric Polyester Heating Element

USA Product Safety Laboratory needed for multiple tests on electric polyester heating element including:

CSA, NEC/CEC, NFPA 70,CSA CEC 22.1
IEEE 2... View More

Metal Elevated Temperature Tensile Testing

Metals Company needs Laboratory for elevated temperature tensile tests? View More

Antimicrobial Efficacy Study in Novel Hand and Surface Sanitizer

NABL Microbiology Laboratory needed for antimicrobial efficacy testing in novel Hand and Surface Sanitizer. We want to check it's antimicrobial effic... View More

ANSI Garage Door U-Factor

Performance Laboratory needed for ANSI/DASMA garage door testing for U-Factor to ANSI/DASMa 105. The U-Factor is the overall heat transfer coefficient... View More

Cable Compression Connection Testing

Industrial Laboratory needed for cable compression connection testing on 750MCM cable with compression lug.
The test connections shall then be heate... View More

Vapor Pressure of Ethylene Glycol Mixture

Oil company needs Laboratory to study the vapor pressure behavior of a mixture (80% H2O, 20% CO2 and 300 ppm ethylene glycol) at various pressures bet... View More

Medical Device Assay Development

Medical Device Laboratory needed to develop a colorimetric semi quantitative lateral flow assay for detection of malondialdehyde specifically, or all ... View More

ASTM Polymer Additives Testing

Polymer Laboratory needed for ASTM testing of polymer additives to ASTM E2019 Minimum Ignition Energy (MIE). Testing for polymer additives (chemicals ... View More

Aerospace Turbine Blade Experiment Study

Aerospace Laboratory needed for performing an Research and Development experiment on aero-engine gas turbine blades

determine the composition, and... View More

Textiles Optical Reflectivity, Transmissivity and IR Emissivity

Textiles Company needs Materials Laboratory for the following testing:

Optical reflectivity minimum @AM0
Optical transmissivity maximum @AM0
IR ... View More

ASTM Solar Reflectance Testing

Technology Company needs USA Laboratory for Satellite ASTM Solar Reflectance testing to ASTM C1549 Standard Test Method for Determination of Solar Ref... View More

Paint Stripping Product Spontaneous Conbustion

Materials Laboratory needed for ASTM spontaneous combustion testing of a paint stripping product applied to cloth according to ASTM D6801-07, Standard... View More

Laminate Film Thermal Conductivity

Materials Laboratory needed for ASTM thermal conductivity measurements of laminate films to ASTM E1530, performed with a TA Instruments DTC-300 or equ... View More

Yarn ASTM Tensile Testing

Textiles Laboratory needed for ASTM tensile testing of aramid yarns across a range of environmental temperatures. Specifically following ASTM D7269 fr... View More

Quote for Aqueous Chemical Solution Analysis

Third-Party Laboratory needed for multiple tests of aqueous chemical solution that contains about 15 - 16% solids.
1. Thermal conductivity at operat... View More

Acetic Acid Vapor Pressure

Analytical Chemistry Laboratory needed for ASTM Acetic Acid analysis as per ASTM D2879-10: Standard Method for Vapor Pressure-Temperature Relationshi... View More

Third-Party Validation of Manufacturer's Specification

Life Science Laboratory needed for third-party validation testing (physical, microbiology, biological) of manufacturer's specifications of sterile per... View More

Transportation Container Conditioning and Environmental Simulation Study

Packaging Laboratory needed for transportation study and ASTM conditioning and environmental simulation testing of shipping containers and boxes to cl... View More

USP Testing of Epsom Salt

LONG-TERM TESTING Analytical Chemistry Laboratory needed for USP testing on Epsom salt including limit of chloride and iron, heavy metal testing, sel... View More

Fruit and Vegetable Shelf-Life Study

Food Laboratory needed for shelf-life study of fresh produce fruit and vegetables.Shelf life test comparing different packaging supplied for test incl... View More

VW Automotive Testing

Automotive Laboratory needed for VW PV testing according to VW PV 1303 Lightfastness/Colorfastness/High Temperature Light Exposure View More

Rectifer Regulator Load

Performance Laboratory needed for testing ten 60 Amp rectifier regulators at 80% load for 2000 hours. A testing rig will need to be created to hold t... View More

Assay of sodium chlordie to meet ACS requirements

Analytical Chemistry Laboratory needed for assay of sodium chloride to determine assay amount of NaCl. ACS requirements=99.0% minimum View More

Physical and Chemical Properties Testing

LONG-TERM TESTING Healthcare Company needs Laboratory for physical and chemical properties testing of a variety of products including ointment, tinc... View More

Gas Analysis / ASTM Hydrocarbons

Industrial Laboratory familiar with ASTM and ISO standards for measuring hydrocarbon samples needed for gas analysis to the API 617 datasheet which of... View More

Washer Fluid Boiling Range Determination

Industrial Laboratory needed for DIN testing of ethanol- and isopropyl alcohol-based washer fluids tested for boiling range according to DIN 53171 Sol... View More

Plastic Resin Regrind Testing

Materials Laboratory needed for plastic resin testing to determine the type of plastic resin and the melting temperature of plastic regrind. View More

ANALYTICAL TESTS

Materials Laboratory needed for REACH compliant testing to the following 3 ASTM Standards

1.ASTM -D86, Standard Test Method for Distillation of Pet... View More

Specialty Chemical Manufacturer needs Analytical Chemistry Laboratory for OECD Testing including 1) Boiling point OECD 103 2) Vapor Pressure OECD 104 ... View More

Materials Laboratory needed for physical testing of VHB tapes for strength, durability, aging, and resistance to temperature View More

Chemical Manufacturer needs Laboratory for GLP testing to support REACH registration of a non hazardous, insoluble, high melting point solid including... View More

Fine Furnishings Company needs Materials Laboratory for ASTM Testing to ASTM D648 Heat Deflection Temperature of Plastics View More

Oil Analytical Chemistry Laboratory needed for ASTM Testing of ethanol to ASTM D7347 Standard Test Method for Determination of Olefin Content in Denat... View More

Manufacturer needs Mechanical Laboratory for durability testing of DC starter motors (4-7 kW). At nominal torque load, measure current draw and speed.... View More

Polymers Laboratory needed for conducting an environmental simulation study on polycarbonate headlight lens of an led headlight for freezing rain and ... View More

LONG-TERM TESTING Metallurgical Laboratory needed to heat treat spooled silver-plated copper wire on nickel-plated copper-clad steel spools (3.5 in di... View More

LONG-TERM TESTING Analytical Chemistry Laboratory needed for monthly accelerated aging and analytical testing on his buffered and unbuffered HOCl solu... View More

URGENT Oil Laboratory needed for the testing of dielectric fluid (75% Alkyl Benzene, 25% Polybutene) for:
Fluid density at various temperatures
Diss... View More

Large chemical company needs laboratory for OECD testing including; A1/OECD102 - Melting/Freezing Temperature
A2/OECD103 - Boiling Temperature
A6/OE... View More

Company is looking to acquire an existing Medical Laboratory in the UK. The laboratory must offer diagnostic and microbiology services at a minimum View More

University Researcher needs mechanical laboratory for temperature measurement for 2 engine pistons with and without coating. View More

University researcher needs pharmaceutical microbiology laboratory for testing two drugs alone and in combination as part of a Minimum inhibitory conc... View More

Laboratory needed for testing high definition thermal IR camera to measure the Tj for LEd and Driver IC.Target size .5mm including turn on device fo... View More

Polymer laboratory needed for laser transparency testing on plastic nylon parts.The values of laser transparency apply on every 12 points located on ... View More

Construction laboratory needed for weld failure analysis and root cause analysis of seam failures of Air Supported Structure buildings that are produc... View More

Chemical company needs materials laboratory for ASTM surface tension testing by ASTM D1331-14 Method A across the temperature range of 15-40C on a sam... View More

Laboratory needs technical service company for Temperature and Humidity Mapping Validation Studies of Stability Chambers and Refrigerator :

30/75 :... View More

Life Science company needs laboratory for NMR spectras to help determine if there are steroimpurities. Spectras at NMR: 1H-13C HSQC 400-500MHz. We ne... View More

Research group needs polymer laboratory for fatigue crack growth rate measurements on transparent composite polymer specimens at low and high temperat... View More

Microbiology laboratory needed for performing Minimum Inhibitory Concentration (MIC) assay of the 7 antibiotics against bacteria: Chloramphenicol, Amo... View More

Automotive laboratory needed for ISO conformance testing of 3 spark cables according the ISO 3808, Road vehicles -- Unscreened high-voltage ignition c... View More

Laboratory needed for complete failure analysis of bolts that failed ASTM F3125/F3125M-15a, Standard Specification for High Strength Structural Bolts,... View More

Laboratory needed for ANSI testing a pilot and thermocouple assembly to ensure that it meets ANSI Z21.77 for Piezo-Electric Spark Ignitors and ANSI Z2... View More

Aerospace laboratory needed for FAA fire testing of several products used in an aircraft engine compartment including:
- 1 type of firewall (fireproo... View More

Microbiology laboratory needed for Minimum Inhibitory Concentration MIC testing of a disinfectant to be used for foot-and-mouth disease View More

Children's apparel company needs performance laboratory for testing to support care label instructions, Clo testing for temperature rating children's... View More

Medical device laboratory needed for cleaning validation study of the water cleaning cycle of a plastic covered electronic tracking device . Simulati... View More

Consumer Products laboratory needed for customized testing of home appliances with the usage of Fabric Softener Sheet (Dryer Sheet) in cloth dryer. ... View More

Laboratory needed to measure thermo-physical properties of fuel additive mixtures containing ethylene, vinyl acetate and cyclohexane. Properties to m... View More

Materials laboratory needed for measuring heat insulation properties of clothing insulation to the current industry standard for hand warmers. The lab... View More

Polymer laboratory needed for measuring the vapor pressure of some poly(ethylene glycol)-substituted siloxanes to determine the vapor pressure at a fe... View More

Laboratory needed for silane testing for EU regulatory submission including explosive properties, auto-ignition, and oxidizing liquids tests as requir... View More

Materials laboratory needed for testing waterproofing membrane for
1 - hydrostatic head resistance (an independent test) required values: 70m (231ft)... View More

Microbiology laboratory needed for MIC and MBC microbial analysis on n-hexane fractions from Anthocleista vogelii and Alstonia boonei on the following... View More

Dermatology Contract Research Organization needed to conduct an in vivo study of the influence of prolonged application of mild water temperature on s... View More

LONG-TERM TESTING Materials laboratory needed for quarterly ASTM testing of tape for minimum peel strength of 60 oz/inch width when tested in accordan... View More

University research scientist needs materials laboratory for thermal conductivity testing of composites across varying temperature ranges. View More

URGENT TESTING Performance laboratory needed for ASHRAE testing of air filter to ASHRAE Standard 52.1-1992,Gravimetric and Dust-Spot Procedures for Te... View More

Materials laboratory needed for ASTM Thermal Stiffness property testing as per ASTM D 1043 Stiffness Properties of Plastics as a Function of Temperat... View More

Materials laboratory needed for determination of optical transmission characteristics of red plastic lens resin used in laser receiver products. Th... View More

Bioanalytical laboratory needed for 3rd party verification of a cryopreserved amniotic allograft tissue sample using an automoted cell counter: Counte... View More

Automotive laboratory needed for fatigue testing of automotive components under cycles Thermal. Temperature range: -40 ° C to +180 ° C Humidity range:... View More

LONG-TERM TESTING Medical device materials laboratory needed for ASTM testing: active Af temperature of wire using DSC per ASTM F2004, Standard Test ... View More

Large corporation needs R&D laboratory for working with brewery for analysis methods for final beer product including the following forcing tests (chi... View More

UK geology laboratory needed for clay testing for suitability for end uses as clay bricks, tiles, ceramics etc. Scope of testing to include:

Stage ... View More

Polymer Laboratory needed for self-accelerating polymerization temperature SAPT testing to UN3532 United Nations Committee of Experts on the Transport... View More

Materials laboratory needed for NATO STANAG Testing of gun cases for dry heat, low temperature, impact, and vibration testing according to STANAG 428... View More

Electrical laboratory needed for SAE external ignition testing of small marine electrical equipment for use in the marine industry to SAE J1171, Exter... View More

Electrical certification laboratory needed for SAE external ignition protection testing of a small electrical device for use in marine equipment to SA... View More

Material analysis laboratory needed for the following testing on plastics:

Environmental Cycle test after 50 cycles according to PV 2005

Lightfa... View More

Engineering company needs materials laboratory for environmental simulations testing of GRP (Glass-Fibre Reinforced Plastic) ground anchor for UV st... View More

NABL materials laboratory needed for rubber rheology testing of optimum cure time & temperature of a liquid silicone rubber using a rheometer. View More

Nutraceutical / Dietary Supplement analytical chemistry laboratory needed for LONG-TERM TESTING - monthly quality control testing of dietary supplemen... View More

Environmental simulation laboratory needed for UV weathering testing on equipment in compliance with IEC 60068-2-5:2010 Test Sa: Simulated solar radia... View More

Physical chemistry laboratory needed for flash point testing of petroleum products in the temperature range from 40C to 370C by a manual Pensky-Marten... View More

Materials laboratory needed for environmental simulation testing of a rubber door sweep product:

Ultraviolet & infrared light

High (150F) and lo... View More

LONG TERM TESTING Medical Device Company needs laboratory for dry He mass spectrometer leak detection testing with minimum sensitivity 0f 5x10 to the ... View More

Construction company needs materials laboratory needed for ASTM testing of insulation material to ASTM C1371 Standard Test Method for Determination o... View More

Automotive laboratory needed for ASTM D5500 (Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake ... View More

GLP combustion laboratory needed for UN-Bowes-Cameron-Cage-Test self-ignition testing on Copper Oxychloride 30% + Mancozeb 20% WP. Quote needed. View More

Polymer laboratory needed for Tg (glass transition temperature) testing of a polyacrylate, which is provided in an emulsion. Determination of Tg of a ... View More

Microbiology Laboratory needed for ASTM or ISO biodegradability testing to ISO14855 Determination of the ultimate aerobic biodegradability of plastic... View More

Physical laboratory needed for EN electrical wiring testing to
High temperature exposure EN 6059-302
Fluid Resistance EN 6059-303
Fluid absorption ... View More

Polymers laboratory needed for brittleness temperature testing according to ASTM D746 ISO 974. View More

Calibration & Repair Services business of laboratory instruments for sale. Manufacturer certified service, Clients in the medical, pharma, food & indu... View More

Company needs product development laboratory for material selection and development of hookah for smoking tobacco. Material tested a high temperature... View More

Analytical chemistry laboratory needed for chromatography testing of caprylic acid using the following protocol: COLUMN TYPE:RTX-1 NON-POLARLENGTH:30 ... View More

Oil laboratory needed for ASTM gasoline testing for specific heat and thermal conductivity to: Specific Heat Capacity by ASTM D2766 versus temperatu... View More

Major beverage production facility needs ANSI/ASHRAE 52.2 Standard testing completed on air filters used in the building to determine current Minimum ... View More

Clinical Laboratory needed for serum analysis of 200 human serum samples for vitamin D levels. Need cost info, turn around time, and minimum level of ... View More

FDA compliant laboratory needed for FDA compliance and performance testing of nebulizer for working frequency, nebulization rate, particle size, oper... View More

Packaging laboratory needed for performance testing of paper soup containers with lids at the temperature of hot liquids / soups.
Sizing is 8,10,12... View More

Medical Device laboratory needed for Dental product testing of dental implants, abutments and surgical equipments. for drills- for radial run out, t... View More

FDA cGMP pharmaceutical Laboratory needed for viscosity testing: Magnesium Aluminium silicate. Sample solution: After determining the Loss on Dryin... View More

Electrical Laboratory needed for conformance testing of automotive spark plug cables:
ISO 3808 (or SAE J2031) for Spark Plug Cable. ISO 3808 or SE... View More

Large organization needs Environmental Contract research organizations capable of insect study with performance testing in a sealed chamber where envi... View More

Electrical laboratory needed for protoype testing: potable water testing of energy consumption and water delta, flow rates and energy of volts, amps... View More

Laboratory needed for multiple tests on Oil Cooling System including crash, vibration, contamination, fire, oil leakage, thermal cycling, etc:

1... View More

ISO 17025 and WHO certified laboratory needed for DIN Testing of automotive components 432H (high temperature relay) in accordance to DIN 75220, aging... View More

Analytical chemistry laboratory needed for reverse engineering and formulation of a product chemical solution:
1. What is in the solution (I know can... View More

Electrical laboratory needed for Flow versus differential temperature comparison study as fuel passes a chamber with an electric heater. View More

Electrical laboratory needed for bulk electrical resistivity testing of a 2 x 2 x .030 fired ceramic specimen from room temperature up to 1000C. Pref... View More

Europe electrical laboratory needed for IEC tests on fibreoptic cables according to IEC IEC 60793-xx and 60794-xx standards: Testing fibreoptic cable... View More

Company developing new line of towels needs consumer products laboratory for laundering test study: AATCC 96 testing (Dimensional Stability to Commerc... View More

Laboratory needed for study on the compatibility of slotted HDPE pipe (for horizontal wells) through a groundwater contaminant plume over time and wit... View More

URGENT LONG-TERM TESTING Laboratory needed for High temperature tensile strength testing of bonded aluminum sheets. Laboratory must have Environmental... View More

LONG TERM TESTING Materials Laboratory needed for Polyamide Tube testing to prove compliance with DIN73378, DIN74324-1 and SAEJ844 Many different test... View More

Construction Buildings Materials company needed for ANSI or ISO adhesive testing to ANSI A118 or ISO 13007
Test adhesive tensile strength at normal ... View More

Independent laboratory needed for LED comparison study of 4 manufacturer's underwater LED light components to evaluate

Quality of construction ? ... View More

Laboratory needed for transportation test for the new packaging box according to ASTM D4169-09 as per below: Please help to quote the test as below, D... View More

Microbiology Laboratory needed for product development of Smokeless disinfectant pyrotechnic device that acts on fungi and bacteria broad-spectrum. th... View More

LONG-TERM TESTING Large spirits company needs ISO 17025 certified independent laboratory for periodic analysis on a variety of spirits and cordials. T... View More

USA or Canada analytical chemistry laboratory needed for chemical testing to Japanese Standards of Quasi-drug Ingredients JSQI methods for ID test, le... View More

Food laboratory needed for irradiated pepper powder testing for volatiles compounds, capsaicinoids, carotenoids and sugars (carbohydrates) in irradiat... View More

Materials laboratory needed for ASTM proficiency testing for Linear Thermal Shrinkage of Plastics as per ASTM D 1204, Standard Test Method for Linear ... View More

Materials science laboratory needed for thermal impedance and thermal conductivity study at different temperature View More

Very Experienced, FDA certified Preclinical Contract Research Organization needed for in vivo preclinical studies for 2 phase subset of FDA biocompati... View More

Large chemical company needs biotechnology laboratory for Polymerase Chain Reaction (PCR) Testing for crop plants. Must be able to process single seed... View More

Mechanical Laboratory needed for ISO mechanical testing to ISO 594 Testing of Conical Luer Fittings

1. Luer Assembly: Ensures that the Luer specime... View More

Oil Laboratory needed for gas testing to be done on the gas sample with operating pressure 80 ? 124 Kg/cm2g & Operating temperature 152 Deg C (Tempera... View More

Medical Device manufacturer needs laboratory for accelerated shelf-life aging of medical products. 60 Samples. Laboratory must have oven with tempera... View More

Laboratory needed for failure analysis on metal composite delamination problem During the production,Test result of adhesion is ok but after 2,3 weeks... View More

Large oil company needs Materials Laboratory for ASTM Testing of Polyurea Electric Motor Grease that requires the ASTM D3336, High Temperature Bearin... View More

Consumer Products Laboratory needed for CLO values correlation of temperature performance for3 products. Correlation of wondering values with a temper... View More

Medical Device Manufacturer needs medical device laboratory for sterilization validation of device sterilization process.
1.¬ ¬Sterilization m... View More

Microbiology laboratory needed for establishing a slf-sustaining microbiome including establish a ratio of microorganisms to populate a small (5cu/mm... View More

Large corporation needs materials laboratory for physical testing: Peel adhesions in cold temperatures. 90° and 180° peels on various substrates. We ... View More

Medical Device Microbiology laboratory needed for sterilization testing of operating room surgical light plastic handles at parameters:
? Tem... View More

ENGINEERING LABORATORY NEEDED FOR PROCESSING AND PROCESS DEVELOPMENT FOR PROCESSING OF GRAPHENE AT HIGH TEMPERATURES TO REMOVE IMPURITIES. COMPANY WI... View More

Agriculture science laboratory needed for Sorghum pellet testing:
Total Moisture (as received basis), Proximate Analysis (air dried basis)
Inhere... View More

Contract Research Laboratory needed for Product development and Prototyping of an adhesive application/device in high temperature edible oil environme... View More

Laboratory needed for Environmental simulation testing including Temperature extremes , Humidity , temperature cycling , Thermal shock View More

Electrical certification laboratory needed for LED Testing for Certificate for CGT FLAT (LED Light Flat tube)
Length: 1 meter
1) Lumen Test (4PI)
... View More

Laboratory needed for validation testing projects on Locomotive Radiators and CACs.

1. Thermal Cycling:
Full size radiator testing, which is appr... View More

Packaging laboratory needed for ASTM transportation testing for the new medical device packaging box according to ASTM D4169-09 as per below: Pleas... View More

Automotive laboratory needed for automotive transmission testing to specified requeirements at High temperature - automotive transmission
Low tempera... View More

Medical Device Microbiology laboratory needed for sterilization testing of operating room surgical light plastic handles at parameters:
? Tem... View More

LONG TERM TESTING Analytical Chemistry Laboratory needed for periodically quality control testing silica gel prior to procurement of large quantities ... View More

Automotive laboratory needed for ASTM Testing and testing to norm MS211-47 Type A2 (KIA/HIUNDAI):
ASTM D792, Standard Test Methods for Density and S... View More

Environmental toxicology Laboratory needed for Pesticide Testing: 6-pack toxicology tests on minimum risk pesticide. View More

Polymer Materials laboratory needed to conduct isothermal viscosity testing of sealants and estimate working life at various temperatures. I know thi... View More

Large petrochemical company needs laboratory for measurement of the accurate density of a molten solid. The density of a molten solid (melting point... View More

Physical Laboratory needed for tensile strength testing. High capacity Instron (50kN+) with environmental chamber for elevated temperature (300-400C) ... View More

Contract Laboratory needed for evaluation of the efficiency of air filtration media at adsorbing common gas phase pollutants. We are particularly inte... View More

Mechanical Laboratory needed for electrical and mechanical properties testing of 0.40 PVC Shielded cable with 8 22 AWG conductors , we need to get th... View More

Analytical chemistry laboratory needed for phthalates testing in bottled drinking water at different temperatures View More

Electrical laboratory needed for IEC testing of tape (synthetic) used in the fire resistance cables to sustain up to 800 deg celcius of temperature ... View More

Physical laboratory needed to provide a quote for high pressure testing - upto 30 KSI + High Temperature - to 400F testing More details after confirm... View More

Petroleum company needs NABL Accredited Laboratory for grease testing as per Indian Standards IS 507 : 1993 Grade 2 (https://law.resource.org/pub/in/... View More

ISO Materials laboratory needed for ASTM PMMA panel testing to US Standards, ISO and EN standards. ASTM E90 and E413, ASTM D-638 : tensile properties... View More

Laboratory needed for petroleum testing of three petroleum based samples that require the following analyses:
Appearance (physical state, color, etc.... View More

Biopharmaceutical company needs laboratory for testing: Tris Base; ID (FTIR) 2) Citric Acid; ID (FTIR) 3) Sodium Citrate; ID 4) Glycine; ID (FTIR) 5) ... View More

Research laboratory needed for alternative fuel testing and analysis in petrol spark ignition engine. Aternative fuels are alcohol fuels blended with ... View More

India Laboratory needed for Mechanical Testing 1 Deflection temperature under load (1.80Mpa) ASTM D648 oC 2 Tensile Strength ASTM D638 M.Pa. Tensile M... View More

Waste Management company needs USA physical laboratory for rubber pellet testing to determine how pellets react to burning at low temperature, electr... View More

Energy company needs laboratory for fuel testing. I have three samples (Light Ends, Solvent, and Industrial Diesel Fuel) that would require the tests ... View More

UNIVERSITY RESEARCHER NEEDS ANALYTICAL CHEMISTRY LABORATORY FOR REFRIGERANT TESTING TO DETERMINE THE FLASHPOINT TEMPERATURES OF VARIOUS REFRIGERANT BL... View More

Performance laboratory needed for moisture management testing on footwear, e.g. the SATRA TM376 test, with the SATRA STM567 test machine (endofoot), w... View More

Company needs Environmental Laboratory for particle analysis for the minimum size of particles that are retained when water poured though a sheet of t... View More

FDA GLP Microbiology laboratory needed for CLSI microbial testing. Need minimum inhibitory concentration per CLSI methodology. Laboratory must have a... View More

Industrial milk company needs Eastern Europe agriculture laboratory needed for roughage testing and manure testing. What is the price and conditions o... View More

Materials laboratory needed for f PROPYLENE GLYCOLtesting for appearance, PG content, moisture, density, index of refraction, acidity, distillation r... View More

Plastics Laboratory needed for ASTM Testing: Brittleness Temperature testing performed to ASTM D746 on thermoplastic urethane.
I need baseline numbe... View More

Large piping company needs East Coast North America materials laboratory for ASTM Testing of six o-ring elastomer samples for DMA analysis to measure... View More

Body cream manufacturer needs consumer product safety laboratory for USP product safety testing including:

Preservative Effectiveness Test/ Antimi... View More

Physical Laboratory needed for a number of tests for flammability of HAND SANITIZER LIQUID with 50% ethanol,
what do we need as tests other then flas... View More

Pharmaceutical Preclinical Laboratory needed for four different in-vitro and in-vivo research experiment research studies:
1) In vivo-Balb/c mice CLP... View More

Medical Device Laboratory needed for EUropean Pharmacopeia Testing of Surgical threads to European Pharmacopeia [8.0] Monograph 01:2008:0324, IDENTIF... View More

I need to evaluate several different samples of Hot Melt Polyester Adhesive (in dry pellet form). I want to know the moisture content of each sample a... View More

Manufacturer needs Consumer Products Safety Toxicology Laboratory for product safety and toxicology testing of fabric-based product.for

- Cytotox... View More

Asia microbiology laboratory needed for challenge test (inoculated pack) on potential pathogens for food intermediate. The product is intermediate moi... View More

Electrical laboratory needed for materials characterization for characterizing a commercial coaxialspecialty cableliterature.Resistance, loop resist... View More

Large transportation company needs physical laboratory for Thermal cycle testing for water charge air coolers with below test requirements. Requiremen... View More

Materials laboratory needed for testing mixture of rosin, beeswax and activated charcoal heated on a open flame to determine malleability and ability... View More

Physical Certification laboratory needed for certification testing of Lighting fixture to sustain full load operation in temperature reaching 70 deg... View More

Asia microbiology laboratory needed for challenge test (inoculated pack) on potential pathogens for food intermediate. The product is intermediate moi... View More

South Africa Physical Chemistry Laboratory needed for Particle Size Distribution (PSD) testing of screened material for Performance Testing a vibratin... View More

Manufacturer a counter top material with recycled window glass and an epoxy resin binder needs physical laboratory for NSF / ANSI / ASTM Physical Prop... View More

Physical laboratory needed for materials testing :
1 Min reflective index wavelength range 250 to 400 nm 60%
2 NIR reflectance ISC 220 ISO 7724 Wave... View More

United Arab Emirates Materials Laboratory needed to test our plastic product Polypropylene granules for the following

Composition
*Appearance
*De... View More

Materials Laboratory needed for certification testing of PIR Rigid cold insulation,
PIR (Polyisocynurate) foam segments are high-quality insulating ... View More

Materials Laboratory needed for required Filter Testing (Directly from US Code of Federal Regulators, 40 CFR Part 50 Appendix L,Reference Method for t... View More

Pharmaceutical analytical chemistry laboratory needed for USP propellant testing to USP HFA134a used in Metered dose inhaler. APPROXIMATE BOILING TEMP... View More

Pharmaceutical contract lab needed for rheological testing services for the evaluation of a biologic hydrogel. Evaluations need to capture gelation c... View More

Germany / Europe preferred but not necessary mechanical laboratory needed for airbag testing: T-shock with humidity for airbag modules.
Alternative a... View More

Analytical Chemistry Laboratory needed for Chemical Analysis of High Purity Red Oxide powder.

The following parameters need to be checked for Red I... View More

Large pharma need pharmaceutical laboratory for Raw material analytical chemistry and microbiology testing for pharmaceutical manufacturing.Seeking to... View More

Bioanalytical laboratory needed for protein expression, purification, and subsequent enzyme extraction....all under anaerobic conditions. Basic prot... View More

India mechanical Laboratory needed for brake vacuum tubes testing Temperature Resistance (High and Low)? Ozone Resistance? Burst Strength? Cold Temper... View More

Clothing company needs Imaging Laboratory for heat mapping imaging of fabric with temperature balancing technology. heat mapping images on a womans b... View More

Automotive Laboratory needed for General Motors Standard Testing as per
GMW 3172_2008
Power Temperature Cycle test ( 9.4.3)
Water Test (9.5.2)
... View More

USA Apparel Laboratory needed for active wear fabric testing for durability, sweat wicking ability, temperature (it feels cool to the touch, we'd like... View More

Materials laboratory needed for propane testing for behaviors and properties of propane when pressure drops from 2000 bar to 300 bar, 80 bar, 50 bar a... View More

Materials Laboratory needed for ASTM Lubricant Testing to ASTM D4172 four-ball wear testing analysis. Lubicate will have "friction reducing concentra... View More

Canada analytical chemistry laboratory needed for Autoignition testing of chemicals View More

Large Manufacturer needs USA or Canada Performance Laboratory for ASTM Testing of cold weather clothing testing to ASTM F2732 - temperature rating fo... View More

FDA AND Health Canada certified/ experienced Cosmetics Laboratory needed for USP microbiology and chemistry stability testing of cosmetic lotion. All ... View More

Pharmaceutical Manufacturer needs India analytical chemistry laboratory for FDA submission testing on topical pharmaceutical drug product testing of ... View More

Large electronics manufacturer needs Accelerated Stress Test in high humidity (80%RH), high temperature (70C) for 4 months View More

New York FDA GMP Food Laboratory needed for food packaging development and FDA organic food chemistry, microbiology nutrition, and shelf life testing ... View More

ISO / IEC 17025.2005 Certified Europe Laboratory with QA System to ISO 9001:2008, ISO 140001:2004) needed for Calcium Sulphite hemihydrate solubility ... View More

Large electronics company needs United States, Japan or Europe Physical Laboratory for ASTM D2628 neoprene testing: Physical Test for Polychloroprene(... View More

Northeast / Mid Atlantic USA analytical chemistry laboratory needed for polymerizaiton and formulation studies: Alkyd type chemistry with accelerated ... View More

Universitry Research Scientist needs Advanced Materials Laboratory for scientific research study: Study of the order-disorder transformations and me... View More

Oil Laboratory needed for Automatic Transmission Fluid (ATF) testing: oil side thermal cycle test per the below on 3 or up to 6 units (1/2" NPT conne... View More

Egypt Geology laboratory needed for geotechnical testing: Pull-out tests for Pull-out and lateral-pressure test. Pull-out Tests (#1) must be carried o... View More

1. Rush USP particulate analysis. Please communicate minimum volume required. 2. Analysis on particulates (i.e. organic, inorganic, elemental composi... View More

Middle East, Asia or Europe Materials Laboratory needed for Plastics Testing: ASTM Testing to ASTM D746, Brittleness Temperature of Plastics View More

California pharmaceutical analytical chemistry laboratory needed for 6 month drug stability studies: Monthly Temperature stability testing of a drug,... View More

Bioanalytical Laboratory needed for polarimetry testing of bioactive isolate compound isolated the bioactive compound purified to novel drug which ha... View More

Food importer needs USDA food laboratory for USDA certification testing of chicken seasoning mixture. Seasoning is in granules packed in sachets inclu... View More

Large automotive company needs laboratory for UL Testing: luminance test performed on a tritium self-luminous exit sign to determine if it meets the N... View More

United Kingdom UK analytical chemistry laboratory needed for liquid identification testing by Gas chromatography & gas spectometry of unidentified l... View More

Materials Laboratory needed for petrochemical analysis: Wax Appearance Temperature in Crude Oil by Cross Polar Microscopy (CPM) View More

Oil Laboratory needed for Research and Development and Product Performance Testing for Oil & Gas cross-linker performance testing. Viscosity testing ... View More

New York Metro Area Product Safety Laboratory needed for IEC Testing: Temperature Rise Test for an infrared portable AC Switch to IEC 60884-1: 2002+A1... View More

Great Britain, Holland and Netherlands Oil Laboratory needed capable to do any or all of those tests, please let me know time and pricing for each tes... View More

Electrical Laboratory needed for ASTM Testing for dielectric strength, the test shall be in accordance with ASTM D149 and the epoxy thickness in the s... View More

Analytical Chemistry Laboratory needed for USP Testing: ethanol analysis to certify that meets certain specification because I'm going to export them.... View More

Mechanical Laboratory needed for ASM Testing: Tensile testing yield strength, minimum elongation at fracture View More

University Researcher needs Europe environmental laboratory for outdoor air quality testing to measure all (the toxic and non toxic) congeners of PCD... View More

Polymer Manufacturer needs Europe Food Laboratory for Migration tests to Food contact regulation No 10/2011 ABS plastic material - 2-3 formulations, ... View More

FDA cGLP Canada or USA analytical chemistry laboratory needed for pharmaceutical tablet product analysis and test method validation for minimum sample... View More

Asia analytical chemistry laboratory needed for soap testing: Soap base analysis:

Composition, % ? Palm Oil + Palm Stearin : 80
... View More

Petrochemical producer needs laboratory for corrosion inhibitors testing for R&D applications in petrochemical producer including: bble test 2. Parti... View More

Polymer Laboratory needed for PSTC or IEC Testing toPSTC-56 or IEC 60454-2: A resistance to penetration at elevated temperature test carried out on u... View More

Southeast USA commercial microbiology lab needed for MIC testig (minimum inhibitory concentration) or MBC (minimum inhibitory concentration) tests on ... View More

Large Automotive Manufacturer needs USA Materials Laboratory for silicone material testing: 0.625" x 1.25" Rectangle Extrusion 30-40 Duro Black Sil... View More

India pharmaceutical laboratory needed with programmed controlled lyophilizer for doing some studies where we can adjust different temperature cycles ... View More

Oat company needs food laboratory for Oat Milk testing for rancidity source.

We have 2 sources of oil tat aybe causing the rancidity: 1/ Partiall... View More

USA materials laboratory needed for Fluid compatibility testing of elastomeric gasket material against a specific grade of kerosene to Exxon Mobil Glo... View More

Medical products manufacturer and distributor of conductive medical gels needs biomedical laboratory for establishing the testing criteria for our ult... View More

Polymer Laboratory needed ASTM plastics testing: ASTM D7573 (Total Organic Content)
We have Plastic Tubing that requires the following test:

AST... View More

Educational institution needs Middle East Food Laboratory for food analysis : macronutrient analysis, but we might also have to evaluate the micronut... View More

US mechanical lab needed for spring testing to help us measure the spring rate & loads on a spring at elevated temperatures. We would need the lab to ... View More

USDA Certified Food Laboratory needed for milk raw testing: Microbiology Bacterial content and nutritional analysis of raw milk samples over time at v... View More

USA Materials Lab needed for optical testing: materials characterization of room temperature surface reflectivity in the 0.3 nm to 3.0 nm wavelength r... View More

Large multinational corporation needs physical laboratory for Environmental Stress Testing: Run a combined vibration with heat temperature for 20 g-r... View More

Microbiology Laboratory needed for radiolabeled pharmaceutical compound testing. 1. Sterility assay/analysis + LAL on 14C or 3H labeled compounds. It ... View More

LONG-TERM TESTING: Pharma needs Lab for water Testing of water produced by the company water purification system for resistivity and total organic car... View More

Need to Source a Mainland Europe or Par East Lab to perform retention testing in accordance with ISO 7864:1993, Sterile hypodermic needles for single ... View More

Analytical Chemistry Laboratory needed for organic beauty products testing: Four samples of organic body balms, 4 samples of organic lip balms and 4 s... View More

Electrical Laboratory needed for research study for studying a printed circuit board's (PCB) in-plane CTE and out-of-plane warpage induced by a steady... View More

Large chemical manufacturer needs India ISO analytical chemistry laboratory for ISO Testing and ASTM Testing of Slurry sample (~25 weight % metal part... View More

U.S. based castor bean grower needs Asia agriculture laboratory for castor bean oil content testing. Prior to harvesting, we need to test the oil co... View More

Midwest USA laboratory needed for ore testing: analysis on alumina ore:

Moisture Content
Particle Sizing
Loss on Ignition
Fluoride
Alumina Con... View More

Metallurgical Laboratory needed for ASTM metals testing by wet chemical analysis or mass spectrometry. 3 samples of calcium metal (Ca) of purity 98.5... View More

UK bioanalytical laboratory with Human Tissue Licence needed to collaborate on Research and Development of robust method to accurately measure free/t... View More

India materials laboratory needed for tire sealant testing as per:

(A) Ethylene Glycol base Aqueous solution,anti corrosive,non-inflammable,non-exp... View More

USA ISO mechanical laboratory needed for ISO testing, IEEE testing and NVLAP testing: combination steering column component in an Anechoic Chamber. P... View More

University Researcher needs United States laboratory for ASTM Testing: Crude oil classification for rail transportation in the USA Up to ten samples ... View More

Contract Research Organization required for Oncology sample testing of below test 1.Specific optical rotation 2.Heavy Metals. 3.Residue on ignition. View More

Analytical Chemistry laboratory needed for contract synthesis: synthesize diazonium salts. The procedure is as follow: "4-Aminobenzoic acid,
obtaine... View More

Spain Materials Laboratory needed for ASTM Testing to ASTM D471 and ASTM D413: Materials, mechanical (Polyurethane Layflat Hose for fuel transfer) MI... View More

Large Paint COmpany needs toxicology laboratory for toxicology study testing: BG1 LUC estrogen transcriptional assay (OECD TG 455) one test sample, a ... View More

Europe analytical chemistry laboratory needed methane pyrolysis unit is to be tested with GC-MS for gas analysis and solid carbon for an analytical ch... View More

URGENT India analytical chemistry laboratory needed for surfactant testing: minimum ignition power [mJ]
? ingnition temperature [°C]
? smouldering t... View More

Middle East Crude Oil trading company needs Middle East materials laboratory for crude oil testing. client and to improve the product specification ... View More

ISO Materials Laboratory needed for thermal stability testing of pure fluids: Determine if Methanol, Ethanol, Acetone and Cyclopentane are stable at t... View More

Environmental laboratory needed for BOTTOM ASH ANALYSIS FOR THE FF CONTENT: 1 LOT
>Moisture content
>SiO2
>AI2O3
>Fe2O3
>CaO
>MgO
>SO3
>Ignit... View More

Plastics Laboratory needed for cryogenic testing: cryogenic tests for Thermoplastic multilayer (non-vulcanized)hoses and hose assemblies according to ... View More

Connecticut, New Jersey, New York or Massachusetts Thermal Laboratory needed for Thermodynamic properties Testing: Need heat capacity, heat of vaporiz... View More

Oil laboratory needed for fluid characterization testing tocharacterize fluids from oil & gas operations in order to complete SDS information sheets. ... View More

Large Oil Compay needs Materials Laboratory for ANSI / SF Testing 4 samples
Water filtration sump to be tested per the ANSI/NSF 42-2000 standard. Sec... View More

Canada Plastics Laboratory needed for ISO Testing: Heat deflection temperature for 2 injected plastic bars for each materials to ISO 75 Heat Deflectio... View More

Large computer company needs Materials Laboratory for polymer testing: measuring the light transmission rate through a optical clear PMMA molded half ... View More

Polymer Laboratory needed for ASTM Testing: Polymer Testing for Minimum Film Forming Temperature one sample of all acrylic polymer emulsion materials View More

Materials laboratory needed for ASTM Testing. Electrical insulating fluid testing for CTE Test. isoparaffinic oil and a standard white oil. I can prov... View More

University Researcher needs mechanical laboratory for biodiesel testing of the wear characteristics of the Bio-dieselin the Four ball wear testing mac... View More

India mechanical laboratory needed for biodiesel testing of the wear characteristics of the Bio-diesel in the Four ball wear testing machine at three ... View More

Clinical Enviromental Microbiology Laboratory needed for clinical waste testing of spore strips. Similar to spore strip testing, we use a spore suspen... View More

Materials Laboratory needed for strength testing to compare rotating beam corrosion fatigue strength of stainless steel with that in air. Specifically... View More

Polymer Laboratory needed for polymer testing studies and failure analysis study: ECE (R-110 and R-67) requirement testing on several polymers and pla... View More

Midwest FDA GMP Microbiology laboratory needed for microbiology testing of E. coli bacteria-based bioprocessing platform. This involves using agar-ge... View More

Oil and petroleum laboratory with the following testing capabilities: The unit examines and analysis the petroleum products as following:- Engine Oils... View More

Midwest Materials laboratory needed for ASTM Testing to ASTM 2732 and ANSI testing to ANSI/ISEA -- 201 American National Standard for Insulating Appar... View More

Materials laboratory needed for materials testing of composite materials: Composite Samples: Aluminium matrix alumina reinforced composites Total comp... View More

Plastics laboratory needed for validation testing for XLHDPE and LLDPE material used in the manufacture of DEF tanks for Navistar. As described; 1. So... View More

Electronics Laboratory needed for SAE Testing to SAE J575, SAE J579, SAE J1330, vibration test, moisture test, dust test, corrotion test, warpage test... View More

Northeast USA engineering laboratory needed for SAE Testing to Marine SAE J1171, External Ignition Protection of Marine Electrical Devices. for brushl... View More

Physical laboratory needed or outgassing testing on Stainless steel samples. These material will be used on Vacuum application hence this test is requ... View More

FDA GLP, GMP and ICH Compliant Bioanalytical Laboratory needed for protein characterization HDX MS using at minimum a GLP or qualified level of assay. View More

USA EPA Environmental Toxicology Laboratory needed for EPA Toxicity Testing: Chronic Whole Effluent Toxicity Monitoring Requirements: The Water Quali... View More

FDA GMP California laboratory (preferably in the Bay Area, CA) needed for FDA GMP storage of FDA GMP pharmaceuticals. Several different storage condit... View More

Quarterly testing. Northeast analytical chemistry laboratory needed for Ammonium Hydroxide testing (Aqua Ammonia 21 BE) to determine if it is reagent ... View More

Canada or US Mechanical Laboratory needed for ANSI Testing mechanical testing fo Mechanical Pressure and Temperature Testing testing the sealing in a... View More

Electrical laboratory needed for bending endurance testing on test cable under varying temperature conditions. Following this a voltage test on the i... View More

US analytical chemistry laboratory needed for alimet testing: Physical data on Alimet (2-HYDROXY-4-(METHYLTHIO)BUTYRIC ACID CAS=583-91-5). list of par... View More

Plastics Laboratory needed for plastics testing of test Microwave use plastics laminated bags that under 21 CFR 177.1390 (Laminate structures for use ... View More

Pharmaceutical Product Safety Laboratory needed for Microbiology testing and product safety testing of excipient to obtain GRAS status. Acne: propion... View More

Microbiology Laboratory needed for ICH, OECD bacterial mutagenicity assay testing to ICH S2(R1) and OECD 471 guidelines, as stated in ICH guideline M7... View More

Europe analytical chemistry laboratory needed for crude oil testing to do analyses to determine electric conductivity and dielectric constant of crude... View More

Pacific Northwest USA physical laboratory needed for physical testing: Vibration testing, Mechanical Shock testing, Humidity testing, and Temperature ... View More

Cosmetics analytical chemistry laboratory needed for cosmetics testing of Collagen gel cosmetic. Product Identity Confirmation Testing 3 ingredients: ... View More

Toronto materials laboratory needed for stone testing a new type of stone - chemical testing, durability testing, toxicology testing for any environm... View More

Large multinational medical device corp needs analytical chemistry laboratory for polymer testing: TGA testing with either FTIR or mass spec analysis ... View More

Analytical Chemistry Laboratory needed for analytical chemistry Testing mass diffusion coefficient of metal ions in a liquid solution.
5 Samples at 4... View More

USA, Caribbean or Canada analytical chemistry laboratory needed for viscosity testing: Viscosity determination for primarily water-alcohol matrix at a... View More

Materials Laboratory needed for ASTM Testing: Thermal Conductivity Test as per ASTM C518 Standard Test Method for Steady-State Thermal Transmission Pr... View More

Plastics Laboratory needed for ASTM Testing: Darmstadt Pipe Tilting Jig Test)on pipe pvc pipe liners:DIN 19565 200,000 cycles. High Pressure Cleaning... View More

Europe Analytical Chemistry Laboratory needed for nicotine testing: content of nicotine in e-liquids (for e-cigarettes)perform the tests in temperatur... View More

Oil Laboratory needed for propane testing. Development of gas solubility data for propane, methane, and ammonia gases in various oils at various tempe... View More

India Materials Laboratory needed for ASTM Standard Testing for Physical properties of Flurosilicone and silicone. Properties are Heat aging, low temp... View More

Plastics Laboratory needed for ASTM Testing of Polyethylene lined material to establish various measures. 1. Physical tests? a. Hardness test (ASTM D ... View More

India Food Microbiology Laboratory needed for Stability Testing and Micrmicrobiological analysis of food samples (cookies) for stability studies. and ... View More

USA Textile Laboratory needed for textile testing: Property PropertyUnits, Method Result Limits Total Weight Ozs/54

Units

Method

Result

Li... View More

India Pharmaceutical Laboratory needed for USP Testing On HDPE BOTTLES 1)Heavy metals, Non volatile residue, Residue on ignition , Multiple internal r... View More

USA Safety Laboratory needed for safety testing a selection of marine life vest safety whistles in accordance with ISO 12402-8 for dB level (100 dB(A)... View More

USA Environmental laboratory needed for air testing: Thermogravimetric Analysis - Infrared (TGA-IR) of dried, fractionated soil organic matter. No iss... View More

CClinical Laboratory needed for carrier testing for HBV,HIV(interfereing substances: minimum 50% whole blood) as per TG054 guidelines, Clause 6.4.5 (... View More

USA Oil Laboratory needed for Viscosity Profiling Crude Oil Testing: The Viscosity Profile Test, is for crude oil with paraffin / asphaltene precipita... View More

Canada Food Laboratory needed for food quality testing of ingredients and the temperature to bring about the desired quality in the product View More

USA Consumer Products laboratory needed for ASTM Testing: Temperature rating on 6-7 jackets View More

USA Oil Laboratory needed for ASTM Testing: Crude Oil Testing based on ASTM 4929 Test Method B (Determination of Organic Chloride)to conduct a modifie... View More

Materials Laboratory needed for Rubber Certification Testing to Density acc. to DIN EN ISO 1183-1Hardness acc. to DIN 53505 Tensile & Elongation acc. ... View More

USA materials laboratory needed for polymer testing of R&D polymer sample for screen Anti-microbi ability of polymer solution2. DSC of Melt and Tg tra... View More

South Africa materials laboratory needed for ASTM Testing: Determination of autoignition temperature, lower and upper explosive limit, vapour pressure... View More

Eastern USA GLP genetics laboratory needed for genetically modified GMO maize growth testing of maize plants grown to maturity under high and low temp... View More

India Materials Laboratory needed for ASTM testing: a. Softening point/ ®C
b. Heat resistance/®C
c. Flexibility in cold term (at -20®C) (Cold Test)... View More

Food Laboratory needed for lipase testing for lipase content/activity in vegetable oil. Please provide further information below and quotation for the... View More

Consumer Products Laboratory needed for ASTM temperature rating testing for apparel (jackets) 6-7 samples. View More

India Electrical Laboratory needed for RFI and EMI LED Tube Light testing and certification of Led Tube light I.e.T8 led tube light. 2 numbers. 1) Min... View More

USA materials Laboratory needed to perform TGA (thermogravimetric analysis) and DSC (Digital scanning calorimetry) testing, preferably both at the sam... View More

Physical Laboratory needed for ASTM testing foam insulation for tensile strength to ASTM D1623, Standard Test Method for Tensile and Tensile Adhesion ... View More

Oil Laboratories needed for CPM or DSCP to supply us Crude Oil Samples that have Wax Appearance Temperature (WAT) data either by CPM or DSC. The samp... View More

US Clinical Microbiology Laboratory needed for microbiology testing: Minimum Inhibitory Concentration Test View More

USA Oil Laboratory needed for crude oil testing of one crude oil sample for Wax Appearance Temperature (WAT), also known as cloud point. ASTM D2500 d... View More

UAE Materials Laboratory needed for ASTM Testing: Properties of Polyethylene:-
Brittleness Temperature - as per ASTM D 746
... View More

Electrical Laboratory needed for IEC tests to IEC 60811-3-1, subclause 8.2 IEC 60811-3-1, subclause 9.2IEC 60811-1-4, subclause 8.4. These tests only... View More

USA Oil Laboratory needed for ASTM Viscosity testing and ASTM pour point testing for failure for gear oil in Greenland at temperatures in the -40 to ... View More

India Packaging Materials Laboratory needed for packaging testing: Optimized temperature and compression pressure or torque for induction heat sealing... View More

cold crake temperature test for PVC Compound(Solid) View More

INDIA PHARMACEUTICAL LABORATORY NEEDED FOR PACKAGING TO ASTM D2863 FOR MEASURING THE MINIMUM QXYGEN CONCENTRATION TO SUPPORT CANDLE LIKE COMBUSTION OF... View More

Accelerated Stability Test analysis for various OTC products. This involves environment chambers with Temperature and Humidity parameters to determine... View More

USA Physical Laboratory needed for ASTM Testing: High temperature abrasion testing. Linear Reciprocating Ball-on-Flat
Wear Testing in accordance wit... View More

USA Mechanical Laboratory needed for ASTM Testing, ISO Testing and Dynamic Mechanical Analysis for a number of mechanical tests. The tests would be a... View More

USA Physical Laboratory needed for ASTM Testing to ASTM-D-2183 Test Method for Flow Properties of Adhesives.ASTM-D-2863 Standard Test Method for Measu... View More

Asia Materials Laboratory needed for ASTM Testing to ASTM 6954 - Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a... View More

Middle East ISO 17025, UKAS Materials Laboratory needed for proficiency testing for cement(chemical test, loss on ignition, setting times, compressive... View More

Europe Materials, Environmental Toxicology laboratory needed for grease testing of 2 products for the following tests: Property prEN 16028 clause ref... View More

Middle East Materials Laboratory needed for ASTM polymer testing: self ignition temperature test of polyresin material (acrylic material) according to... View More

USA Oil Laboratory needed for ASTM Testing, Octane testing to ASTM D2700, Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel View More

India Analytical Chemistry Laboratory needed for pharmaceutical testing Minimum ignition temparatue (MIT)
Minimum ignition energy (MIE)
Layer igniti... View More

Plastics Laboratory needed for PVC compound testing to determine the Flammability temperature ( or Temperature Index) follow to BS ISO 4589-3 Plastics... View More

India Metallurgical Laboratory needed for materials testing of Miralloy / Trimetal plated Parts . The test requirement is as mentioned below. Please ... View More

USA FDA cGMP medicinal chemistry laboratory needed for dietary supplement testing of oft gel encapsulated Omega-3 fish oil dietary supplement. Test c... View More

Middle East or Europe Materials Laboratory needed for Glass Bulb testing to define PH and corrosion rate of distillated Light Gas Oil (LGO) for differ... View More

USA FDA GMP Pharmaceutical BioChemistry Laboratory needed for pharmaceutical characterization testing: Solubility Characterization under Pressure and ... View More

Large Oil Company needs ISO Materials Laboratory for ASTM Testing of a ball bearing grease by ASTM D1478, Standard Test Method for Low-Temperature Tor... View More

India analytical chemistry laboratory needed for analytical chemistry testing. All the below testing by DSC instruments for lyophilizer project 1) Tm ... View More

Pharmaceutical Analytical Chemistry Laboratory needed for USP Testing 1) Tm Melting Temperature

2) TE Eutectic Temp

3) TG Glass temp

4) T... View More

Australia Transportation Laboratory needed for ISTA Testing and ASTM Testing: Temperature conditioning testing, drop testing, vibration testing, compr... View More

Analytical Chemistry Laboratory needed for detecting phase transition (liquid/liquid crystal) temperature using thermal microscopy and DSC. View More

Mechanical Laboratory needed for automotive heat exchanger testing. 1. Pressure Cycle Durability Conditions :The Test shall be performed on condenser ... View More

USA Food Laboratory needed for food processing validation testing to validate our claims for several benefits achieved through cooking meat in our rot... View More

USA Analytical Chemistry Laboratory needed for pharmaceuticeutical testing including micro fraction collection and NMR Testing on fractions for a cold... View More

Europe Environmental Laboratory needed for sludge testing for Sludge treatment plant
-twice a year 2 samples
Heavy Metals- Atomic absorption Spectro... View More

Europe ISO, UKAS Physical Laboratory needed for ASTM physical testing. Ceramics Testing: High temperature dilatometry, creep resistance and strength View More

China analytical chemistry laboratory needed for propylene glycol testing:
Parameter
ID A: IR adsorbtion
ID B: Limit of diethylene glycol and ethyl... View More

India analytical chemistry laboratory needed for raw materials chemical testing: OECD Testing and ASTM Testing: a) Melting Point/Boiling Point

b) S... View More

Malaysia Materials Laboratory needed for ISO Testing ISO 10534-2: Sound absorption testing by the impedance tube method ISO10534-2. Minimum 2 material... View More

USA Analytical Chemistry Laboratory needed for raw material testig: Triethylamine Assay of a raw material using a validated method (limit is 99.0% min... View More

Florida food laboratory needed for shelflife study on a consumer product Interested in a validation study regarding extending shelf life for around 1... View More

USA Physical Laboratory needed for SAE Testing to SAE J2302, Radiant heat source temperature.
Heat internal cylinder to 1200 degrees and measure surf... View More

Medical Device Laboratory needed for ASTM materials testing of product specific testing of MRI compatible guide wires (nonmetal) in accordance with AS... View More

Analytical Chemistry Laboratory needed for Distribution Coefficient Determination Calculation of % of a specific azeotropic tertiary amine (will be su... View More

Eastern Europe Packaging Laboratory needed for Packaging Testing DIN Testing and EN Testing (Boxes that Hold Clothing)Compression Testing - EN ISO 120... View More

Brazil hose manufacturer needs Product Safety Laboratory for product safety testing of hoses to EN BS 13 766 - ANNEX G - TABLE G.1 (Security of end fi... View More

European Union electrical laboratory needed for EN electrical testing to EN 60684-3-409:1999 : Break-down voltage testing, temperature resistance test... View More

Physical Materials Laboratory needed for ASTM Testing: Autoignition Temperature Test on one sample of cotton wadding View More

Mechanical Laboratory needed for Impact testing: Impact strength at low temperature (Steel ball mass 1000±50gDrop height 200 mmImpact energy 2 JTemper... View More

USA or Canada Oil Physical Materials Laboratory needed for crude oil testing the wax appearance temperature (WAT) of 20 crude oil samples using Cross ... View More

USA Environmental Laboratory needed for sludge testing of sample of copper sludge from electrolytic copper refining waste (from flotated + concetratee... View More

Plastics and Polymer Analytical Chemistry Laboratory needed for plastering compound testing. 1.Total Calcium content 2.Total Magnesium content 3.Loss ... View More

ISO Ireland mechanical laboratory needed for ISO compliance testing to ISO 8536, check valves (non return plastic valves ) to show compliance to ISO 8... View More

Plastics Laboratory needed for Quality COntrol Testing, acrylic testing of acrylic used for the see-through tank wall of a new shark tank to be instal... View More

Oil Laboratory needed for chemical testing for unwanted chemicals in oil production process with pore volume injected at core scale for heavy oil prod... View More

USA Electrical Laboratory needed for Amperage Limit Testing:

Start with powering the connector (2-10AWG) up to 30A until the temperature on the out... View More

Oil Physical Laboratory needed for used cooking oil testing 1) Auto-ignition temp. 2) flash point Who can do this, (preferably close to Denver) and wh... View More

Malaysia Analytical Chemistry Laboratory needed for TGA analysis. Determination of mass loss using TGA and phase transition by Differential Thermal An... View More

Malaysia Physical Polymer Laboratory needed for Durability Testing for Durability Dropping Impact
- Dropping Impact Mass : 25kg
-Input Load,F1 : 6kN... View More

USA Physical Laboratory needed for polymer testing at low temperature. stress-strain testing of polymers at -150C to establish stress-strain curve at... View More

ISO 17025 Bioanalytical laboratory needed for drug testing for Chirality and polymorphism of the drug: absence or presence: data on the content of ste... View More

India Mechanical Laboratory needed for ASTM Testing to OECD. Auto ignition temperature, Vapor pressure, Melting Point & Boiling point in each 8 no. of... View More

Food analytical chemistry laboratory needed for comparison study of two samples of Sugar Mill Oil. S. No. Tests 1 Flash Point OC (COC) 2 K. Viscosity... View More

Canada or US analytical chemistry laboratory needed for viscosity testing of three mineral oil (CAS# 8042-47-5) samples, performed at room temperature View More

India, Asia Materials Laboratory needed for ASTM Testing:
1) Heat Transmission coefficient
2) Rigidity - ASTM C393
3) Elongation - ASTM D638
4) D... View More

Bioanalytical Laboratory needed for protein stability tests (HPLC) on multiple forms of human insulin, after we expose the samples to different temper... View More

Canada Mechanical Laboratory needed for Mechanical Corrosion Testing. A programable corrosion chamber is needed for a 12 week corrosion test. The ch... View More

Asia, UK or USA Materials Laboratory needed for Artificial Aging Testing high temperature like GFC test at 160 in step 48, 96,144 192 hrs Each step: v... View More

India Materials Laboratory needed for ASTM Testing: Melting Temperature, degradation mechanism, calculating molecular Weight by gel permeation chromat... View More

USA Shipping and Transportation Laboratory needed for Temperature and humidity chambers, drop testing, vehicle vibration testing, altitude testing, lo... View More

Physical mechanical laboratory need for Cold fuel pressure drop testing to maintain fuel heating performance
Return flow type heater + Filter ASSY: ... View More

Southern USA materials laboratory needed for high temperature GPC testing of polymer molecular weight and molecular weight distribution by GPC. There ... View More

Materials Laboratory needed for Sodium Petroleum Sulfonate Testing to Test Method Standard Specification Minimum Maximum Petsol-40 1 SP. Gravity @ 29.... View More

USA FDA GMP bioanalytical laboratory needed for vaccine analysis of polysorbate concentration in a vaccine protein solution by a qualified/validated m... View More

Large, multinational infrastructure company needs physical laboratory for for Crack Tip Opening Displacement
Tests ( CTOD ).The testing should b... View More

Electrical laboratory needed for Outdoor single pole hook operated Disconnect Switch testing: Rating: 11 KV/ 15 KV, BIL : 110 KV, Continuous Current R... View More

Bangladesh electrical laboratory needed for dielectric testing of voltage: 1)Outdoor single pole hook operated Disconnect Switch:
Rating: 11 KV/ 15... View More

USA neurology bioanalytical laboratory needed for Ignition Residue [Ash} testing and Heavy Metal Testing on 3 different samples of NeuroPatties View More

Multinational Corp needs Germany, UK, Canada or USA materials laboratory for API and ASTM Testing for pipeline material for the Diversion Gas Pipeline... View More

India Microbiology Laboratory needed for antimicrobial efficacy testing of material on infected dentin samples and find the minimum inhibitory concen... View More

Bioanalytical Laboratory needed for Large scale analysis of soluble sugars. Enough capacity to analyze 1000+ samples in 2 weeks with an average run ti... View More

Metallurgical Laboratory needed for Tensile testing for rebar under BS4449 and BS7777 Tenstile testing for steel reinforcement bars under cryogenic ... View More

Physical Laboratory needed for thermal testing to test carbon fiber composite in the shape of a cylinder. We wish to know the expansion coefficient in... View More

Contract Research Organization (CRO) needed that has large scale production capacity for the analysis of soluble sugars.

The CRO must have:

1... View More

Large Pharmaceutical Manufacturer needs pharmaceutical analytical chemistry laboratory for Speciation testing of solutions containing pyridine, iodine... View More

USA Certified Laboratory needed for NHTSA / DOT Certification Testing of Vehicle Alcohol Breathalyzer with Ignition Interlock. View More

USA physical laboratory needed for ASTM shrink band testing to ASTM D2838. Five different shrink band samples to be tested for shrink force. Force as... View More

Pittsburgh or Eastern USA Mechanical Laboratory needed for Mechanical load testing: A total of 86 steel separate parts are to each be loaded to a for... View More

Physical, Mechanical Laboratory needed for reliability testing of locomotive duty pre-lube pump Start/stop tests under various thermal conditions (40 ... View More

Utah geotechnical laboratory needed for geotechnical testing: moisture-density, gradation, atterberg limits, triaxial compression, direct shear, conso... View More

Ice Cream Manufacturer needs Southeast USA Food Microbiology Laboratory for Frozen custard testing - Petrifilm method for Standard Plate Count and Col... View More

USA Analytical Chemistry Laboratory needed for crude oil analysis to determine the minimum miscibility pressure of a crude oil sample with CO2. View More

Analytical chemistry needed for hydrocarbon testing: 1. Crude oil naphthenate screening-test 2ea
2. Crude oil sodium emulsion screening-test 2ea
3. ... View More

USA Electrical Laboratory needed for ASTM Testing:
Electrical resistivity testing of 3 to 6 samples.
AC, 60hz
Electrodes should be gold or maybe p... View More

University Research and Development needs India microbiology laboratory for fungal isolation and identification, pathogenicity, fungicide sensitivity ... View More

Geochemistry laboratory needed for Feldspar testing Fine Powder 200 Mesh and Lumps. Components to be covered under sampling: (100% by Weight) * Silica... View More

Materials laboratory needed to measure gas diffusion coefficient in polymer melt High temperature (120 deg C) View More

Physical laboratory needed for gas/ vapor testing of black Nomex material with Nitrile Rubber adhesive applied to it for presence of gases/vapors are ... View More

Houston, Texas analytical chemistry laboratory needed for ethyl gas testing on4 samples Three out of the four samples is liquids. The other sample ... View More

Electrical laboratory needed for EC Testing: Konu: Cable issues
Tarih: Tue, 9 Aug 2011 04:42:35 +0000
Kimden: Imran Aslam Khokhar View More

Materials Laboratory needed for TMA testing of yarns to determine the softening temperature of 0.60 mm diameter monofilament yarn samples. View More

Sweden Analytical Chemistry Laboratory needed for Hydrocarbon testing of HFO (Heavy Fuel Oil) and we need to know its components. what hydrocarbons it... View More

Germany physical laboratory needed for thermal testing: Laminating glass test

1. Humidity test according to EN ISO 12543-4

2. High temperature t... View More

Pharmaceutical Laboratory needed for Bulk Drug Formulation Development, Analytical Testing, Toxicology Study, Cosmetics Development & Evaluations mini... View More

Europe or UK environmental laboratory needed for Environment certification EN 300 019 2-4 or 1-4. temperature, humidity, air, water, radiation, shock,... View More

NYC or NJ FORENSICS LABORATORY NEEDED FOR FAILURE ANALYSIS OF A 1" BRASS BALL VALVE CASTING BROKE IN HALF.VALVE WAS INSTALLED ON A DUAL TEMPERATURE HE... View More

USA Packaging Laboratory needed for ISTA 3B packaging testing to ISTA 3B for a medical device (up to 800lbs) Additionally we require testing to the fo... View More

Eastern USA electrical laboratory neede for junction temperature measurements for CREE XLamp LED chips, Electrical, commercial LED lighting
Preferab... View More

New England Packaging Laboratory needed for Shipping container testing Testing of fully packaged shipping container involving temperature inside insul... View More

USA FDA Analytical Chemistry Laboratory needed for ICP/MS testing: Pure compound has 2% residue on ignition. Identify metals in the compound having a... View More

Mechanical Laboratory needed for Essai N° Essai: Bow and Twist, Bending stress measurement, Components Shear and Pull Test, IONIC Contamination, Micr... View More

Mumbai Mechanical Laboratory needed to test Machinical Type temperature Indicator
View More

test matrix to get the High strain rate(1 to 100 s-1) characterization of plastic materials with different environmental condition at -35, 23 & 85 de... View More

Europe Physical Laboratory needed for aerospace climatic testing of Aircraft Operation in climatic chamber from extreme low to high temperature. View More

Canada or USA Polymer Laboratory needed for testing 5 films to be measured for oxygen transmission rate (OTR) with Mocon, water vapor transmission rat... View More

USA Electrical laboratory needed for USAS (ANSI) testing on 656Amp step voltage regulator: Resistance measurements of all windings on rated voltage co... View More

EPA GLP, EEC, CIPAC MT, OECD Bioanalytical laboratory needed for a(IIM 2.3/03-04) flash point and spontaneous ignition study - New study required to ... View More

Middle East Physical Laboratory needed for Recycled PET Flake Physical Test Suite: Flake size (mm)
Moisture content (%)
Moisture Variation (%/hr)
I... View More

USA West Coast Electronics Laboratory needed for circuit board testing and burn-in at temperature extremes -20C to +50C. ... View More

China Consumer Products Laboratory needed for aerosol testing, rigorous storage testing at elevated temperature to test corrosion of internal of can a... View More

Electrical Laboratory needed for NFC Testing of Piercing Connectors - Voltage tests and water tightness tests
2. Temperature rise and over current te... View More

Australia Physical Laboratory needed for Specific Heat and thermal conductivity testing of HDPE over temperature range of 0C to 250C View More

Non-GLP Microbiology Laboratory needed for bacteriology MIC50 testing-Determine minimum inhibitory concentration by either agar dilution or broth micr... View More

Bangalore Electrical Laboratory needed for testing Grounding/Bounding elements as per aeronautic standards. Electrical current injection tests: up to ... View More

Consumer Products Safety Laboratory needed for EU directive testing of consumer aerosol product, flammability tests to confirm labeling classification... View More

Scotland, UK ASTM Physical Laboratory needed for Brittleness Temperature Testing of PP Foam Tester Kit as per ASTM D 746-07 in order to determine the ... View More

USA Materials Laboratory needed for ASTM materials testing as per ASTM E84 AND BS 476-building materials treated with fire retardant chemicals are pla... View More

India Mechanical Laboratory needed for testing polymer for Tensile, Compression, Shear, Uniaxial cyclic at Quastatic,Shear relaxation at Quastatic -Hi... View More

Analytical Petroleum Laboratory needed for Autogenous-ignition temperature testing as per DIN 51794 View More

Europe Mechanical Laboratory needed for static tensile tests and notch impact at RT and Low Temperature for FAA-Valid Material Qualification (B-Values... View More

Preclinical Contract Research Organization needed for preclinical toxicology study of Interferon drug:
Toxicology Study: The study is required on 35 ... View More

UK ISO Analytical Food Laboratory needed to obtain quantitative test data detailing moisture vapor transmission rates on fatty film samples. Test regi... View More

USA A2LA/ISO 17025 Mechanical Laboratory needed for Endurance, Break-away, Drop, Elevated and low temperature, drop test, and performance testing per... View More

India ISO Materials Laboratory needed for polymer testing poly house sheets for green house -
1) U.V.stabilized film should block U.V. Radiations bel... View More

FDA GMP Bioanalytical Pharmaceutical Laboratory needed for GMP peptide testing to determine temperature dependency on optical rotation at 20C and 25C View More

Physical/Mechanical Laboratory needed for physical testing Vicat softening temperature testing, Melt flow rate testing and tensile properties of therm... View More

Ontario, Canada ASTM Analytical Chemistry Oil Laboratory needed for testing one sample of oil and one sample of tar for Vapor Pressure at an elevated ... View More

India NABL Bioanalytical Laboratory needed for ISO Testing, Facemask Biocompatibility Testing as per ISO 10993-1:2003
Breathability t... View More

USA Analytical Chemistry Laboratory needed for testing by GC-MS spectra for 5 pure standards of chemical CofA
-fast turnaround needed

Preferred An... View More

USA A2LA/ISO 17025 Mechanical Laboratory needed for Endurance, Break-away, Drop, Elevated and low temperature, drop test, and performance testing per... View More

ISO ANSI Laboratory needed for safety temperature vibration test for hand protection. View More

India ASTM Analytical Chemistry Oil Laboratory needed to test sample of Lube Oil for Auto Ignition Temperature as per ASTM E659-78(2005) View More

USA A2LA or ISO 17025 Materials Laboratory needed for Ignition residue Testing as per VDA 675 130. 6 samples (rubber compounds). View More

Europe ASTM Mechanical Laboratory needed for testing as per ASTM D 1335 at room temperature and 80°C on tufted carpets for automotive application View More

India Environmental Laboratory needed for Altitude and temperature testing as per DO-160F View More

Large Wine Closures Manufacturer needs USA (North Carolina) Environmental Laboratory for testing temperature and humidity for Walk In Chamber
Temper... View More

Magnetics Manufacturer needs Mechanical Laboratory for fusion weld tension testing. 3 fusion welded 316L full size samples for tension. The tube sampl... View More

Tampa Bay, FL Electrical Laboratory needed for testing as follows: Assemble devices in enclosure; Test devices to failure; Monitor temperature. View More

USA Electrical/Mechanical Laboratory needed for testing 4kW On-Board DC-DC converter for Shock & Vibration, Temperature Cycle, Thermal Shock, Fungal G... View More

Canada Analytical Chemistry Laboratory needed for testing 2 kitchen 100% cotton cook jackets which have have holes in them after 4 months usage. I wa... View More

USA Thermal Laboratory needed to determine the glass transition temperature of a air dried sugar film. The Tg is expected to range from -70 to 100 oC... View More