Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
Independent Regulatory Consultant needed in medical devices on the following :
- ISO 11737-1 and 2 (Sterilization of health care products)
- ISO 10993 (Biological evaluation...
MULTIPLE TESTING
Contract Laboratory needed for CSA Testing of steel pipes as per CSA G401-14 Corrugated steel pipe products
MULTIPLE TESTING
USA Laboratory needed for ASTM testing of Teflon lining inside the lined sight glass to observe the flow of fluid between pipes.
The produc is form in granu...
Contract Laboratory needed for ISO testing of PVC U pipes as per ISO 1452-2:2009 (full specification)- Plastics piping systems for water supply and for buried and above-ground...
MULTIPLE TESTING
University Researcher needs Contract Laboratory for ASTM antioxidant levels testing of PEX pipe as per ASTM D3895 (Standard Test Method for Oxidative-Induct...
Contract Chemistry Laboratory needed for ion chromatography testing of Fluoride in 36% HCl with detection limit near 0.2ppm.
LONG TERM TESTING
Performance laboratory required for determination of cause of corrosion in seamless carbon steel pipe Ø8. The following testing is needed:
- Chemical anal...
MULTIPLE TESTING
Contract Laboratory needed for ISO Testing of multilayer water piping systems according to ISO 21003-2:2008, Multilayer piping systems for hot and cold wate...
Sustainability Building Company needs ISO permeability testing of multilayer pipes according to the following ISO Testing Standards:
1. SCOPE: ISO 21003-2:2008, Multilayer pi...
MULTIPLE PRODUCTS
MULTIPLE TESTING
Materials Laboratory needed for 2 steel pipes testing for physical properties with 8 and 11 mm of internal and external diameter. Is this ...
PRODUCT DEVELOPMENT
MULTIPLE PRODUCTS
MULTIPLE TESTING
Contract Laboratory needed for a multiple of flexible line prototype testing requirements involving exposure to sour ...
MULTIPLE TESTING
USA Contract Laboratory needed for life expectancy and structural integrity of section of copper pipe taken from a structure we may be acquiring. Upon first ...
Drainage Company needs Contract Laboratory to evaluate the limited oxygen index between 3 different samples to evaluate the impact of our formulation change in regards to fla...
EUROPE LABORATORY
MULTIPLE PRODUCTS
Europe Contract Laboratory needed for rubber gasket testing for gaskets used for pipe lines in Drinking water and waste water.
Por medio de la presente solicito una cotización para evaluar Coeficiente de deslizamiento y Un producto Poliuretano en base a la Norma AWWA C222 Polyurethane Coatings for the...
Contract Laboratory needed for fiberglass pipe support barrier testing for radiation absorption to measure the suitability for use in a nuclear facility.
Contract Laboratory needed for integrity and remaining service life of HDPE pipes that have been installed underground more than 25 years. Please respond with the FEE for pr...
Texas USA Laboratory needed for on-site PLM testing of tar based pipe coatings on a pipeline Our job scope requires us the need of a full report or documentation to meet fu...
ASIA LABORATORY
Asia Mechanical Laboratory needed for ASTM rotary testing for 1/4, 3/8, 1/2, 3/4, 1 to ASTM 1387 Standard Specification for Performance of Piping and Tubin...
INDIA OR GERMANY LABORATORY
India or Germany Contract Laboratory needed for ASTM FRP Pipe testing as per ASTM D2992 i.e. HDB establishment.
In this context, we request yo...
INDIA LABORATORY
Large India Pipe Manufacture needs Materials Laboratory for upvc testing and certification including fire resistant,air pressure,wraping issues, testing
MULTIPLE TESTS
ASIA LABORATORY
Asia Contract Laboratory needed for Solvent Free Polyurethane Coating testing on pipes to the following Test Standards:
BS 6920-1:2014 Suitab...
MULTIPLE TESTS
USA Contract Laboratory needed for testing of coated steel pipe samples.
Contract Laboratory needed for ASTM D2992 Standard Practice For Obtaining Hydrostatic Or Pressure Design Basis For "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pi...
NEW PRODUCT TESTING
Contract Laboratory needed for testing water substitute for water pipes . This product intended to be put into water pipes instead of water and the smoke ...
MULTIPLE TESTS
Contract Laboratory needed for the following tests on PVC Pipe:
Size: 400mm dia
Thickness: 20mm
Tests Required:
1. Short-term hydrostatic pressure test(ISO...
Contract Laboratory needed for hubless pipe internal epoxy coating testing in compliance with EN 877 Cast iron pipes and fittings, their joints and accessories for the evacuat...
Large Oil Company needs Laboratory to help explore ways to evaluate composite (i.e. reinforced polymer with glass fibres) pipes. The samples are expected be in a pipe shape. A...
Manufacturer needs Laboratory NF water taps certification
USA LABORATORY
NEW PRODUCT DEVELOPMENT
MULTIPLE TESTS
USA Physical Contract Laboratory needed for evaluation testing of new design liquid flowmeter. For the evaluation, th...
LONG-TERM TESTING
MULTIPLE PRODUCTS
MULTIPLE TESTS
Large Construction Company needs large Construction Laboratory for testing industrial complex manufacturing concrete, GFR...
Physical Laboratory needed for structural integrity testing of cast iron sprinkler pipe.
European Union Laboratory needed to test a section of DN1200 FRP pipe to BS 6920 to ascertain it meets drinking water requirement
Contract Laboratory needed for AASHTO testing of polyethylene pipe testing in compliance with Alabama DOT and the following AASHTO Test Standards:
AASHTO M-326 Standard Spe...
Contract Laboratory needed for quality testing of Copper Nipples to find its strength, durability and the pressure rating.
Contract Laboratory needed for BS Pressure testing on PVC_U pipe to BS Test Standard BS EN 14814:2016 Adhesives for thermoplastic piping systems for fluids under pressure.
EUROPE LABORATORY
International Accredited Europe Materials Laboratory needed for ASTM N VR testing on as hose with braid. Sample length 14 inch
Food Company needs Materials Laboratory for ASTM Oxygen transmission rate for Flexible foil according to ASTM D 3965 Standard Classification System and Basis for Specification...
Accredited laboratory need to perform PVC fitting testing in compliance with requirements of ES BN 1329-1:2014 Plastics Piping Systems For Soil And Waste Discharge (Low And H...
Mechanical Laboratory needed for ASTM Testing of double ferrule compression fitting for pipe/tube connecting to ASTM F1387(2012) Standard Specification For Performance Of Pipi...
Materials Laboratory needed for DIN Thermal conductivity Testing of Pipe Section as per DIN EN ISO 8497 ( K value)
Materials Laboratory needed for ASTM thermocycling testing for Polyethylene Aluminium Composite Pipe according to ASTM F1282-2010 standard's requirement. How much does it cost...
Industrial Laboratory needed for ASTM tube fittings testing including hydrostatic burst test, Make break test,Reassembly test & Hardness test.Sizes:-1/4-1.to conform to AST...
Industrial Laboratory needed for rockwool pipe testing to be in compliance to enter the USA market
Accredited Laboratory needed for ISO testing of uPVC pipes as per ISO 1452-2:2009 standard Plastics piping systems for water supply and for buried and above-ground drainage an...
Large Healthcare Company needs Laboratory for ASTM combustibility and flammability of K-Flex insulation of pipling to ASTM E84 Standard Test Method for Surface Burning Charac...
Laboratory needed for ASTM testing on fiberglass / Glassfiber reinforced plastic FRP/GRP pipes needed for oil and gas project
1. Full regression test according to ASTM D2992:...
Industrial Laboratory needed for ASTM tubes and pipe fittings testing to ASTM F 1387 test certification for my instrumentation fittings (Tube & Pipe fittings)
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, call us at 1-855-377-6821, e-mail us or view more Laboratory Requests