Rectifer Regulator Load
Performance Laboratory needed for testing ten 60 Amp rectifier regulators at 80% load for 2000 hours. A testing rig will need to be created to hold the rectifier regulator and a fan that will be needed to cool the rectifier regulator to make sure it does not exceed 45°C. The three phase AC signal required to run the test will need to be about 94 Vpp and 360Hz to match the stator output at 3600RPM. The output voltage from the regulator will be around 12.6 to 14.2 VDC. For data acquisition, temperature, voltage and current will need to be recorded every hour.
Members of our Laboratory Outsourcing Network can use our online platform to communicate with the Lab Requestor, submit responses with quotes and have access to more information such as budget, location required, etc.
Contract Laboratory can help you with all your Power and Energy testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs including:
Need Power and Energy Testing or Scientific Research?
Save time and money searching. Simply, submit a Power and Energy request to find the laboratories or lab suppliers that best meet your needs.
START-UP New Energy Efficiency Company needs Electrical Laboratory to run studies to show Effective Power Consumption (k... view
$10,000 BUDGET APPROVED Energy Company needs Electrical Laboratory for comparison of test devices before and after Irrad... view