Laboratory Test Request Details

Adhesives, Glues, and Tapes Test Request


Request: 19-00202

Status: Closed


Title:

Oregon Department of Transportation (ODOT) Adhesive Bond Strength

Description:

Large corporation needs Materials Laboratory for Oregon Department of Transportation (ODOT) testing of adhesive bond strength on Transportation Safety Recessed Pavement Marker

Adhesive Bond Strength - Option 1 Epoxy. 250 psi minimum average tensile bond strength of five specimens according to the following test:
 Bond a 1.5-inch diameter steel test plug with sandblasted surface to the center of the marker bottom using an epoxy meeting AASHTO M237.
 After 48 hours curing time at 74° F ± 4° F, tensile load the test plugs at a load rate of 4850 pounds/minute until failure.
Adhesive Bond Strength - Option 2 Flexible Bituminous Adhesive. 170 psi minimum individual tensile bond strength of five specimens according to the following test:
2 Section 00855.00
 ODOT TM 432-05 amended as follows. Bond a 1.5-inch diameter steel test plug with sandblasted surface to the center of the marker bottom using a Flexible Bituminous Adhesive from the ODOT Qualified Products List.


Interested in this Adhesives, Glues, and Tapes Request?

Members of our Laboratory Outsourcing Network can use our online platform to communicate with the Lab Requestor, submit responses with quotes and have access to more information such as budget, location required, etc.

Create FREE Account


Other adhesives, glues, and tapes laboratory services.

Contract Laboratory can help you with all your Adhesives, Glues, and Tapes testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs including:

Learn more about adhesives, glues, and tapes testing and research

Need Adhesives, Glues, and Tapes Testing or Scientific Research?

Save time and money searching. Simply, submit a Adhesives, Glues, and Tapes request to find the laboratories or lab suppliers that best meet your needs.

Submit Laboratory Request

Test Request: 19-01535

Contract Test Laboratory needed for for adhesion testing on 3m 8412 tape view


Test Request: 19-01324

Analytical Laboratory needed for taking a small amount (less than 10%) of CHG in adhesive (in grams) and GCMS testing fo... view


Test Request: 19-01259

Comparison of adhesive properties (chemical, physical and performance) Hot Melt Adhesive  Test Viscosity at di... view