Most Recent strength Laboratory Test Requests

Contract Laboratory has received the following strength Laboratory Test Requests which need to be fulfilled! These strength Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their strength Laboratory Test and Scientific Research. If you need a strength Laboratory, please Submit a strength Laboratory Test Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Test Requests Service Requests Product Requests Business Request

Title:

PVC Tubes Comparison Study

Description:

Laboratory needed for comparison study of the mechanical and physical properties of several different PVC extruded tubes for urometer, column strength, elasticity, tensile strength, crush and to the extent possible, chemical composition.

View More


Title:

Stress Relief Testing

Description:

Large Industrial Company needs Physical Laboratory for stress relief testing not exceeding 4% per 1000h at initial force making 70% of maximum force corresponding to ultimate tensile strength.

View More


Title:

ISO Tensile Testing

Description:

ISO 17025 Polymer Laboratory needed for Tensile testing to ISO 1421 Rubber- or plastics-coated fabrics -- Determination of tensile strength and elongation at break

Requirements:

Need to have ISO 17025 accreditation for performing ISO 1421 tensile tests.

View More


Title:

Drilling Fluid and Cementing Additives Quality Testing

Description:

Oil Drilling Operation needs Oil Laboratory for mud chemicals (drilling fluid) quality and cementing additives quality testing:

In order to verify the cementing additives dosage & effectiveness to give us accurate measures for the slurry properties (...

View More


Title:

Dietary Supplement Raw Material and Finished Product Testing

Description:

LONG-TERM TESTING FDA cGMP compliant laboratory needed for identification of incoming powdered raw materials and finished product testing to show strength, purity and composition.

View More


Title:

ASTM and ASME Architectural Natural Stone Testing

Description:

Cpnstruction Materials Laboratory needed for Architectural Natural Stone testing to multiple ASTM and ASME Standards including:those referenced in the Natural Stone Institute's Dimension Stone Design Manual, VI.

MATERIAL SPECIFICATIONS
ASTM C629
Sta...

View More


Title:

Soil Testing for Geological Survey

Description:

Environmental Laboratory needed for soil testing as part of a geological survey including the following tests.

1. Laboratory tests of determination of physical and mechanical proerties Parameter Specific gravity Bulk density Dry density Porosity Void ...

View More


Title:

Cleavage Testing of Bonded Joints

Description:

Industrial Materials Laboratory needed for ASTM Cleavage testing of composite materials to ASTM D5041, Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints. Cleavage test, at ambient condition; and at 130 Deg F and 100% Rel...

Requirements:

ASTM D5041, cleavage test, at ambient condition; and at 130 Deg F and 100% Relative Humidity

View More


Title:

Haircare Product Clinical Research Study

Description:

Cosmetics Laboratory needed for clinical research study of hair glue for
1) Adhesion strength 2) drying time 3) adhesive durability.

View More


Title:

Trouser Seam Strength

Description:

Large Corporation needs laboratory for seam strength testing on trouser to BS EN ISO 13935-2)

View More


Title:

Surgical Gown Comparison Study

Description:

Large Organization needs Medical Device Laboratory for comparison study on 3 or 6 Surgical gowns suppliers testing against BS EN 13795 , including Wet Penetration , Dry Penetration, Mircobial cleanliness , particulant matter& linting , liquid penetration ...

Requirements:

We require the work to be completed by 16 April

View More


Description:

Performance Laboratory needed for failure testing to determine the max amount of weight a fabric foot restraint can hold.

Requirements:

max weight until failure.

View More


Description:

Construction Laboratory needed for testing and certification of flameproof building materials made from resin and recycled cardboard and/or paper including fire resistance, water resistance, density, impact resistance, thermal efficiency, flexural and com...

View More


Description:

Materials Laboratory needed for physical testing of VHB tapes for strength, durability, aging, and resistance to temperature

View More


Description:

Materials Laboratory needed for physical properties testing of adhesive transparent tape used in mattresses including thickness of adhesive coating,core thickness,peel strength,film thickness,width

View More


Description:

Materials Laboratory needed for analysis of the variation in dielectric strength measurement and surface analysis of an aluminum substrate that has a dielectric and various graphic inks printed on one side. The surface needs to be analyzed for variation ...

View More


Description:

Materials Laboratory needed for textile testing to AATCC and ASTM testing methods including tear strength, chlorine residue, dimensional stability, etc.

Requirements:

Tear strength, chlorine residue, dimensional stability, etc.

View More


Description:

Large Manufacturer needs A2LA Materials Laboratory for ASTM Materials Testing to following ASTM Test Methods:
ASTM D695 Compressive strength,
ASTM D2990 Resistance to creep, ASTM E328 Stress relaxation properties

View More


Description:

Performance Laboratory needed sports tapes testing for the strength and quality of the products.

View More


Description:

Medical Devices Laboratory needed for performance and microbiology testing of medical textiles to EN 13795: 2011 A1: 2013 including Tensile strength - dry and wet - EN 29073-3:1992 Burst strength - dry and wet - EN 13938-1Resistance to fluid penetratio...

Requirements:

Please provide the costs for each test and the testing in general for one kind of medical textile. And also could you tell me, how long do I need to wait for the test results?

View More


Description:

Medical Device company needs materials laboratory for comparison of two adhesives to determine similarities and differences between the two such as chemical constitution, curing, strength etc.

Requirements:

We would like a report/summary of chemical constitution, curing, strength etc. for a couple lots of adhesive

View More


Description:

Materials laboratory needed for ISO polypropylene testing: charpy impact strength analysis according to ISO 179-2/1eU for Notched and unnotched Polypropylene specimen at 23C

View More


Description:

LONG-TERM TESTING Aerospace company needs materials laboratory for testing new aircraft part including mechanical property testing for composites and plastics.Our immediate needs are tests for Flexural and Bearing strength of Lamitex Fr-4 Glass/Epoxy mate...

View More


Description:

Packaging laboratory needed for comparison evaluation of the strength parameter of corrugated boxes from different suppliers.

View More


Description:

Plastics laboratory needed for shrink film testing for:
puncture thumb edge, puncture sharp edge, tear strength and haze

View More


Description:

Laboratory needed for complete failure analysis of bolts that failed ASTM F3125/F3125M-15a, Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, ...

View More


Description:

Materials laboratory needed for testing waterproofing membrane for
1 - hydrostatic head resistance (an independent test) required values: 70m (231ft),
2 - wet/dry cycling (an independent test) required values: no effect @ 25 cycles at 231ft, and
3 - ...

Requirements:

IMPORTANT NOTE - Please provide quotation with response
Bentonite Mass Per Unit Area ASTM D 3776 (mod.) 1.0lb/sqft (4.8kg/sqm)
Peel Adhesion to Concrete ASTM D 903 (mod.) 15 lbs/in (2.6kN/m min)
Hydrostatic Pressure Resistance ASTM D 5385 (mod.)...

View More


Description:

Materials laboratory needed for ASTM testing of newmarine coating to ASTM D4939 Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater and ASTM D5618 Measurement of Barnacle Adhesion Strength in Shear on materials

View More


Description:

Construction materials laboratory needed for properties testing of a resin/cement blend for oilfield use including compressive strength (MPa), flexural strength (MPa), E-modulus / elasticity (MPa), rupture elongation (%), tensile strength (MPa), and failu...

View More


Description:

LONG-TERM TESTING Materials laboratory needed for quarterly ASTM testing of tape for minimum peel strength of 60 oz/inch width when tested in accordance with ASTM D 3330, Method A for 3M 250 flat back tape.

Requirements:

We would need certificate of conformance and testing every 3 months to extend tape shelf life from 12 months up to 2 years.

View More


Description:

Materials laboratory needed for adhesive testing for bond strength of adhesive to metals

View More


Description:

Geotechnical laboratory needed for cold compression strength CCS analysis of iron ore lumps. Each sample will be provided individually and must be analyzed separately to avoid mixing or contamination. After analysis carried out, each sample must be pres...

View More


Description:

Mechanical laboratory needed for ASTM Testing (yield/breaking strength/elongation) of uncoated seven-wire strand (15.24mm) in accordance with ASTM A416 Grade 270.

Requirements:

Please send quotes with response.

View More


Description:

LONG-TERM TESTING Large UK consulting firm needs geological laboratory for monthly geotechnical soil tests including: sulphate reducing bacteria/reduction/oxidation potential/pH (corrosivity test), electrical resistivity, XRD test, resonant column, cycli...

View More


Description:

University research scientist needs materials laboratory for tensile strength analysis of a biocompatible polymer nanocomposite.

View More


Description:

Medical device laboratory needed for physical ASTM testing of a range of titanium surgical-grade products to the following ASTM Standards: ASTM F2052 Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magneti...

View More


Description:

Orthopedics medical device laboratory needed for physical certification testing of prosthetic devices to ISO10328 (Prosthetics - Structural) for a lower limb prosthesis

Requirements:

ISO10328

View More


Description:

Medical Device Laboratory needed for microbiology and physical testing of medical drapes and surgical gowns to several EN ISO standards:
1. EN ISO 22612 Resistance to Microbial Penetration - Dry,
2. EN ISO 22610 Resistance to Microbial...

View More


Description:

Materials laboratory needed for integrity / life expectancy testing of PVDF and Tedlar used in Supported Structure industry and Fabric Structure industry. The textiles are used in products that have a life expectancy of 20 years and need weathering verif...

View More


Description:

Accredited materials laboratory needed for DIN EN testing of glass reinforced plastic part adhesives to DVS 1618/DIN 54457 test of lap shear strength according to DIN EN 1465, drum peel test according to DIN EN 1372

View More


Description:

Materials laboratory needed for IEC testing of adhesive tapes to IEC 60454 (pressure-sensitive adhesive tapes for electrical purposes) including tensile strength, elongation at break, flexibility, electrical conductivity, adhesiveness, weathering testing,...

View More


Description:

Consumer Products Safety Laboratory needed for FDA sunglasses safety testing by drop ball test method to Standard LT-1 July 12, 1971 21 CFR 801, 410 MIL-STD-105.

Requirements:

Sunglasses Association of America Standard LT-1 July 12, 1971
21 CFR 801, 410
MIL-STD-105

View More


Description:

Product safety laboratory needed for ANSI testing of ladder levelers to ANSI 14.8-2013 (Safety Requirements for Ladder Accessories).

View More


Description:

Electrical laboratory needed for ASTM testing of U-PVC cable ducts for shore hardness (type D) to ASTM D 2240, coeffecient of linear thermal expansion to BS 3505/ 3506/ ASTM D 696, insulation resistance at 60C to BS EN 50086 / BS EN 61386-1 IEC 60093, die...

Requirements:

Product: U-PVC cable ducts of sizes : 110 × 4.5 mm and 50 × 3.0 mm No.

View More


Description:

LONG-TERM TESTING Materials laboratory needed for ASTM physical, mechanical, and accelerated aging testing of polymer auto parts to car manufacturers specifications WSS-M2D496 (Ford), GMW 14196 (General Motors), MS-AY-549 (Chrysler-Fiat) including:
WSS-M...

View More


Description:

Packaging laboratory needed for physical testing of pharmaceutical corrugated shippers including burst strength, compression strength, and moisture content

Requirements:

Burst strength, compression strength and moisture content.

View More


Description:

FDA GMP Bioanalytical laboratory needed for AATB human tissue bioanalysis including stability studies, protein degradation, bioburden and tensile strength.

View More


Description:

Packaging laboratory needed for physical testing of corrugated box for burst strength and edge crush tests.

View More


Description:

Packaging laboratory needed for aseptic packaging testing for seal strength studies & assessment of seal strength.

Requirements:

Lab must be based in Singapore.

View More


Description:

Packaging laboratory needed for leak and seal strength testing and also acetaldehyde testing in preforms.

View More


Description:

Polymer laboratory needed for nondestructive NDT Testing: heat resistance testing of an acrylic lens according to IWA MIL-PRF-5425. Also, need physical properties such as elongation, tensile strength testing of O-rings made out of 51+/-5 durometer EP rubb...

Requirements:

WILL SEND YOU SOME SAMPLES OF BOTH WITH COPIES OF THE DRAWINGS AND PROVIDED MATERIAL CERTS AND HAVE YOUR COMPANY VERIFY AND CERTIFY THE CORRECT MATERIAL USED.

View More


Description:

URGENT. ASTM metallurgical laboratory needed for tensile and elongation testing of a extruded copper rod in accordance with ASTM E8 and conforming to ASTM B49.

Requirements:

Must be tested in accordance with ASTM E8 and conform to ASTM B49

View More


Description:

Polymers laboratory needed for thermal, dielectric, and insulating testing for properties of two components polyurethane resin according to the following standards:

Dielectric strength (50Hz -1mm) kV/mm - CEI 60243-1

Dielectric constant (100 Hz) -...

Requirements:

Dielectric strength (50Hz -1mm) kV/mm - CEI 60243-1
Dielectric constant (100 Hz) - CEI 60250
Dissipation factor, tan delta (100 Hz) - CEI 60250
Volume resistivity (1000V) ohm.cm - CEI 60093
Thermal conductivity W/m.K - ISO 2585
Coefficient of therm...

View More


Description:

Composite materials laboratory needed for ASTM D1781 standard test method for climbing drum peel for adhesives or DIN 53295 testing of sandwiches; peel test by means of a drum on adhered metals.


View More


Description:

FDA cGLP pharmaceutical analytical chemistry laboratory needed for gel strength testing (bloom value) of gelatin to EP European Pharmacopeia (9th Edition)

Requirements:

cGLP quality system.
Preferably in the the UK.

View More


Description:

Consumer product laboratory needed for physical testing of baby pacifier clip for length, Impact resistance, durability of the garment fastener, and tensile strength.

Requirements:

Section 5.1.6 Length
Section 5.2.1 Impact resistance
Section 5.2.2 Durability of the garment fastener; and
Section 5.2.3 Tensile strength.

View More


Description:

Aerospace company needs materials laboratory needed for polymer testing for the dielectric strength in cured poly-sulfide rubber.

View More


Description:

Engineering company needs materials laboratory for environmental simulations testing of GRP (Glass-Fibre Reinforced Plastic) ground anchor for UV stability testing in accordance with ES ISO 4892-2 , performance at elevated temperatures is in accordance ...

View More


Description:

India Engineering / Contstruction laboratory needed for Rock Bolt Anchor Pull Testing on site in Mumbai.

Requirements:

At Site in Navi mumbai

View More


Description:

Aerospace laboratory needed for aviation (textiles) carpet testing to BSS 7313 Boeing Edge Binding Strength.

Requirements:

BSS7313 Edge Binding Strength

View More


Description:

Construction Materials Laboratory needed for strength and durability check of glass reinforced fiber GRF material.

View More


Description:

Plastics / Materials Laboratory needed for ASTM physical testing of plastic crates from different suppliers including:
Raw material tests as per ASTM D4976 + ASTM D5203, density, melt flow rate, elongation at break, tensile strength, UV resistance, stres...

Requirements:

-

View More


Description:

Materials Laboratory needed for ASTM Tensile and ELongation Testing to ASTM D1055-09, Standard Specifications for Flexible Cellular Materials-Latex Foam

Requirements:

Tensile and Elongation

View More


Description:

Packaging laboratory needed for complete packaging testing of 7 SKU's of products including: material testing, and benchmark packaging
Bottles: Drop test, seepage test, topload test
Caps: Capping force test, torque test
Labels: Fadeometer test, chambe...

Requirements:

Bottles: Drop test, seepage test, topload test
Caps: Capping force test, torque test
Labels: Fadeometer test, chamber test, resistance test

Additionally, we would need specifications tests to identify material used, dimensions, weight, brimful volume...

View More


Description:

Physical laboratory needed for EN electrical wiring testing to
High temperature exposure EN 6059-302
Fluid Resistance EN 6059-303
Fluid absorption EN 6059-305
Dynamic cut through EN 6059-405
Mould growth EN 6059-306
Smoke density EN 2825 B
Tensile ...

Requirements:

Mould growth EN 6059-306
High temperature exposure EN 6059-302
Fluid Resistance EN 6059-303
Fluid absorption EN 6059-305
Dynamic cut through EN 6059-405
Smoke density EN 2825 B
Tensile strength EN 6059-404

View More


Description:

Healthcare company needs materials laboratory for failure investigation for durability and performance testing of vinyl flooring that is wearing.

Requirements:

Confidential - prefer contact via email

View More


Description:

Polymers laboratory needed for testing thermoplastic products for strength, integrity, durability.

View More


Description:

URGENT, LONG TERM. Certified plastics welding laboratory needed for peel and crush testing of polyethylene coupons on electro-fusion welding joints according to EN 13067.

Requirements:

Peel Test or Crush Test as per EN 13067

View More


Description:

ASTM composite laboratory needed for fatigue testing of rods with S-N curve analysis.

Requirements:

S-N curve result, ASTM

View More


Description:

Power laboratory needed for testing the strength and durability of a power line cable.

View More


Description:

LONG TERM TESTING. Materials laboratory needed for thermal testing of plastics for DIN EU ISO 4577 material.

Requirements:

Test temperature: 150 C
Duration test: 7 days

View More


Description:

FDA Consumer Products Safety Laboratory needed for sunglasses testing to meet FDA regulations for importation.

View More


Description:

Materials laboratory needed for IEST and ASTM Clean Room Gloves Testing:
1 Tensile Strength ASTM D412
2 Ultimate Elongation ASTM D412
3 Surface Resistivity @50%RH ESD/EOS S11.11
4 MVTR
5 Shedding and extractables - IEST RP-CC005.4
LPC ? 0.5 ?m, Cl...

Requirements:

The IEST RP-CC005.4 test is our primary goal. We can have the gloves tested for items 1-4 elsewhere if you do not have the ability to perform these procedures. If you can, we would prefer utilizing one test facility.

View More


Description:

FDA GLP laboratoryneeded for vendor qualitificaiton testing of surgical drapesL Resistance to microbial penetration - dry and wet, Cleanliness-microbial, particulate matter, Linting Resistance to liquid penetration, Burst strength-dry, wet, Tensile stren...

View More


Description:

Large company needs Optical Properties of 1 cm lenses tested for the following: Transmittance, Comatic Aberration, Veiling Glare Index, Lens Flare, Ghost, Halo (ISO 9358-1994), Lateral Chromatic Aberration, Longitudinal Chromatic Aberration and Reflecti...

Requirements:

vibration testing and mechanical shock testing in the X, Y and Z axes of the lenses,

View More


Description:

Bioscience company needs Bioanalytical Laboratory for agar testing: gel strength in the range of is a range of 660-1200 g/cm^3 for bacteriological agar used in the dehydrated culture media industry

Requirements:

gel strength agars is a range of 660-1200 g/cm^3. If you have a strength analyzer that could accommodate this range that would be great. We'd like to send samples of our agar or analysis.

View More


Description:

Coatings company needs materials laboratory for DIN rubber coatings testing to DIN 53 504 Tensile strength test, DIN 53 507 Tearing resistant test and DIN 53 516 Abrasion resistant test for rubber sample

Requirements:

test must be performed under DIN protocol

View More


Description:

Packaging/container company needs laboratory to test the breakdown of poly-lined containers for milk and similar consumables by means of hydrochloric acid or nitric acid.

Requirements:

batch testing and rapid response.

View More


Description:

Cable tie company in India needs laboratory to verify compliance with ICE 62275 standard.

View More


Description:

Large medical company needs to test drug delivery of Taxol via small bore connections against chemical stress cracking per ISO 594-2, DIN 13276, DIN EN ISO 80369-1 standards

View More


Description:

International security lock company needs test of a Padlock per BS EN 12320 2012

Requirements:

Grade4,5 of BS EN 12320

View More


Description:

Large manufacturing company needs testing of Sealants (Silicone/PU/Acrylic) used in building and construction to comply with ASTM standards (ASTM C920, ASTM C719, ASTM C834) We are based in Dubai - UAE

View More


Description:

Company needs materials laboratory for Failure Analysis Testing of welded seam strength in air supported structures made out PVDF 28oz vinyl fabric. The seams of the fabric are RF welded together to create the structure and we have been having some issue...

Requirements:

Not sure I just need someone to help figure out if we have a material issue or equipment issue one thing I would like to know is our fabric really what our vendor says it is.
But I would be happy to answer any additional questions anyone may have.

View More


Description:

LONG-TERM TESTING Large wine import / export company needs accredited laboratory for several analysis of wine-products over course of year including: Total alcoholic strength g/l Total alcoholic strength %vol Alcoholic strength g/l Alcoholic strength %vol...

View More


Description:

Biopharmaceutical company needs packaging laboratory for dessicant and humidity indicator card performance and seal strength testing



View More


Description:

ISO Accredited USA and European Biophysical Laboratory Needed for biomaterials testing of dental implant material: to ISO 14801- Dynamic fatigue test for endosseous dental implants

Requirements:

ISO 14801- Dynamic fatigue test for endosseous dental implants

View More


Description:

ISO 17025 accredited packaging laboratory needed for packaging testing: 1.) Identification (IR) and seal strength test for:
a.) Push through foil (Al)
b.) Cold form laminate (oPA/ Al/ PVC)
c.) PVC film
d.) PVC film coated with PVDC

2.) Identifica...

Requirements:

ISO 17025 acceredited

View More


Description:

Sports performance laboratory needed for exercise cardio machine testing to determine muscle groups affected, safety of machine, weight limits of machine, tensile strength of machine

View More


Description:

Laboratory needed for multiple testing on tape product
AAMA 713
AAMA 711
AATCC 127
ASTM D412 ? Tensile Strength
ASTM D 1970 Water Penetration
ASTM D 3300 Adhesion and accelerated aging (multiple Tests)
ASTM E331

For Exterior breather membrane :...

View More


Description:

ASTM Testing of aluminum honeycombs to multiple ASTM standards: .ASTM C273 - Standard Test Method for Shear Properties of Sandwich Core MaterialsASTM C365 - Standard Test Method for Flatwise Compressive Properties of Sandwich CoresASTM C297 - Standard Tes...

View More


Description:

MATERIALS LABORATORY NEEDED FOR ASTM TESTING OF HOOK AND EYE TO ASTM 5169 TESTING OF SHEAR STRENGTH OF HOOK AND LOOP
ASTM 5170 PEEL STRENGTH OF HOOK AND LOOP FASTENERS

View More


Description:

Nanotechnology company needs materials laboratory for conducting studies on nanoparticles effect on the base polymers. polymer composite testing on various polymers, including PP, PE, Nylon, TPU, and others. In particular, we are interested to learn the m...

Requirements:

The lab must be equipped to carry out the following tests on polymer samples:
Tensile Strength,
Young's Modulus,
Gas Permeability,
Thermal Conductivity,
Electrical Conductivity,
Impact Strength,
Creep,
UV Irradiation,
Colorant,
Melt Flow Index, ...

View More


Description:

LONG-TERM TESTING Packaging Laboratory needed for packaging testing of In flexible packing materials like double laminated , triple laminated & other flexible packaging material for:
Flex crush resistance
Water vapor transmission rate
Oxygen transmis...

View More


Description:

Biomechnical laboratory needed for sports performance testing of Cardio machine - 800 lb. including weight limit, calories burned, tensile strength of metal or wear and tear including which muscles of the body and which areas of fat the machine burns i.e...

Requirements:

Confidential, must have confidentiality form.

View More


Description:

URGENT LONG-TERM TESTING Laboratory needed for High temperature tensile strength testing of bonded aluminum sheets. Laboratory must have Environmental chamber with capability of heating up to 120C

Requirements:

Universal tensile tester (1-5 kN capacity)
Important : Environmental chamber with capability of heating up to 120C

View More


Description:

LONG TERM TESTING Materials Laboratory needed for Polyamide Tube testing to prove compliance with DIN73378, DIN74324-1 and SAEJ844 Many different tests covering material mechanical properties, hydrostatic burst pressure, impact testing, moisture absorptio...

View More


Description:

Construction Buildings Materials company needed for ANSI or ISO adhesive testing to ANSI A118 or ISO 13007
Test adhesive tensile strength at normal temperature and water immersion *Determination of tensile adhesion strength - C
*Determination of open t...

Requirements:

ANSI A118 or ISO 1300

*Determination of tensile adhesion strength - C
*Determination of open time
* Determination of slip

View More


Description:

Materials laboratory needed for DIN and ASTM Testing of thermal insulations foam board. Testing to To meet out the requirement of
Density: DIN 53420(ASTM D 1622
Thermal conductivity :DIN 52612 OR 52616
Compressive strength :DIN 53421 (ASTM D 1621
Wat...

Requirements:

To meet out the requirement of
Density: DIN 53420(ASTM D 1622
Thermal conductivity :DIN 52612 OR 52616
Compressive strength :DIN 53421 (ASTM D 1621
Water vapour diffusion resistance factor: DIN 52615
Water vapour permeability : ASTM C355
Heat soaki...

View More


Description:

Large corporation needs physical laboratory needed for plastic cable testing: Load rating for pedestrian and vehicle (H-20, 40) for cable made of recycled plastic.

Requirements:

Load ratings for pedestrian and vehicle (H-20, 40)

View More


Description:

Shoe manufacturer needs textiles fabrics testing:tensile, shrinkage,
and tearing tests

View More


Description:

Electrical laboratory needed for Corrosion Resistance / Tensile Strength Testing (NIJ 0307.01) on 13 Samples x Metallic Handcuffs (technical specs provided upon request).

View More


Description:

LONG-TERM TESTING Materials laboratory needed for shear strength testing of an adhesive as per Federal Specification MMM-A-181D.Shear strength by tension loading340 lbs/in2 dry joint test per ASTM D906.

Requirements:

Federal Specification MMM-A-181D and Shear strength by tension loading 340 lbs/in2 dry joint test per ASTM D906. If you need a copy of MMM-A-181D please let me know.

View More


Description:

Materials laboratory needed for ASTM Testing of Automotive adhesive and sealent for tensile properties to ASTM D 638.
1) Percent Elongation at Break
2) Modulus of Elasticity (Young's Modulus)

Requirements:

(ASTM D 638), 3.0 +/- 0.5 mm thick, material cure for 30 minutes at 180 °C adhesive temperature, condition at 23 +/- 2 °C for 24 h, test at 23 +/- 2 °C, Type I specimen, W = 10 mm, G = 50 mm, 5 mm/min +/- 10 %)

View More


Description:

Packaging Laboratory needed for Burst Strength Testing of Corrugated Cardboards.

View More


Description:

Automotive Laboratory needed for physical testing to Volvo STD 423-0036, Impact strength,

View More


Description:

Construction Buildings Laboratory needed for ASTM Testing for Prefabricated Vertical Drains
1. Width ASTM D 3774
2. Thickness ASTM D 5199
3. Discharge Capacity qw , straight & folded ASTM D 4716
4. Tensile strength, elongation at break, elongation at ...

View More


Description:

Laboratory needed to Measure deflection of actuators during travel at full actuation range during testing of height adjustable tables and legs. Table would be loaded with 100 lbs of weight during the test.

Requirements:

Ability to measure deflection during travel. Laser measuring equipment?

View More


Description:

Materials laboratory needed for ASTM Dielectric Testing: Dielectric Strength and Water Absorption (RT 24h) to ASTM D149, Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid. The material is 30% glass filled Peek.
Wha...

Requirements:

ASTM D149 I believe

View More


Description:

Laboratory needed for failure analysis on metal composite delamination problem During the production,Test result of adhesion is ok but after 2,3 weeks (or 1,2,3..months) later ,some of panels occur delamination problem? (Some of Project; We saw after the ...

View More


Description:

LONG-TERM TESTING Materials laboratory needed for rheology testing of bio sealant to find its gel time(i.e time required for the substance to change from liquid to gel).

Requirements:

we need a rheometer that checks within the range of 5 seconds.

View More


Description:

Materials Laboratory needed for biomechanical / biophysical testing for medical device burs:
¬Mechanical force of d¬evices test (compress¬ion, Torsion)
Biomechanical property of dental burs is important for safety usage so test should assure tor...

Requirements:

¬

View More


Description:

Aerospace company needs materials laboratory for investigation study of delamination problem with decor laminating application.by coupled TGA-MS (Thermalgravimetric Analysis and Mass Spectrometry) to detect if offgassing occurs. We often see delamination...

Requirements:

We would like to know if you have coupled TGA-MS (Thermalgravimetric Analysis and Mass Spectrometry) to detect if offgassing occurs. Any other suggestions will be appreciated!

View More


Description:

Nutraceutical analytical chemistry laboratory needed for content and quality testing of 2 strengths of for L-Glutathione capsules

View More


Description:

Exporter of rubber,plastic bathroom accessories needs physical laboratory for physical testing including prformance and biodegradability:
1 Tensile strength ISO 527 1
2 Elongation
3 Tear strength
4 Density / sp. gravity
...

View More


Description:

Larg Construction Building Materials company needs certification laboratory for ANSI Testing of tile adhesives & grout accoding to ANSI standards.
FK10W Cementitious tile adhesive C1T EN 12004
GM1 Cementitious tile adhesive C2T EN 12004
FLS1000 Cemen...

View More


Description:

Materials Laboratory needed for ASTM tensile testing to ASTM E8.,Standard Test Methods for Tension Testing of Metallic Materials. Flat tensile specimen will need to be machined according to ASTM E8 from 6061-T651 slug that is 2.75 in diameter and 8 in len...

View More


Description:

Materials laboratory needed for comparison study testing of Box tapes for smell, contaminants, strength and durability.

Requirements:

need to be able to publish results of our product Vs. samples A-C above.

View More


Description:

LEGAL Law firm needs laboratory for antioxidant strength testing of a Dietary Supplement for Antioxidant Strength

The back label of a consumer dietary supplement represents that a serving size (2 chews) contains the antioxidant strength of 20 cartons o...

Requirements:

ORAC value

View More


Description:

Laboratory needed for ASTM tensile testing to ASTM E8.,Standard Test Methods for Tension Testing of Metallic Materials Flat tensile specimen will need to be machined according to ASTM E8 from 6061-T651 slug that is 2.75 in diameter and 8 in length. Mat...

View More


Description:

Materials laboratory needed for ASTM and MIL Standard testing of TTVF adhesive tapes. These tapes are getting expired. So these tapes need to be tested as per ASTM D1000-70a to extend the Shelf life. Please provide Quote for the same.

Requirements:

Test as per MIL-M-87958 and ASTM D1000-70a

View More


Description:

Laboratory needed for validation testing projects on Locomotive Radiators and CACs.

1. Thermal Cycling:
Full size radiator testing, which is approximately 1000 Kg. Low and high temperature water will be required at 98 degree C and at 4 degree C. Air ...

Requirements:

We need to monitor the temperature , pressure, Stress , & expansion of the materials by using data logger

View More


Description:

Biomaterials laboratory needed for in-vitro surgical sealant testing 1. Burst test of surgical sealant (2-PEGs) as per ASTM F2392.
2. Gel Time test - surgical sealant (2-PEGs)
3. Swell Test - surgical sealant (2-PEGs)
5. Gel Mixing test - surgical sea...

Requirements:

All In Vitro test conditions.

View More


Description:

Consumer Products laboratory with experience in nylon fabrics needed for integrity testing of waterproof nylon handbags.for comparison between two fabrics including failure analysis of peeling of fabric.

Requirements:

Understanding of/experience with nylon fabrics

View More


Description:

FDA cGMP, GDUFA, DEA Pharmaceutical analytical chemistry laboratory needed for Gel Strength (Bloom Value) for the Sample Gelatin NF as per the current Gelatin USPNF Monograph.

Requirements:

Contract Lab must be GMP and have the following documentation ready to provide:

? cGMP Certificate
? Debarment Certificate
? Latest EIR/ Latest FDA Inspection date and its outcome
? Contact person details (phone #, fax #, designation of that pers...

View More


Description:

Physical laboratory needed chair testing to test structural welding on a metal chair

Requirements:

Stress to chair on SWL

View More


Description:

Textiles laboratory needed for Fabric testing or fabric used for Sheets.
as per CAN/CGSB 4.2. Quantitative analysis of fiber mixture> 14-2005.
2. Unit mass of fabric : 5.1,
3. Woven Fabric count> 6.
4,Breaking strength-grab method,20s >9.2
5....

Requirements:

. Quantitative analysis of fiber mixture> 14-2005.
2. Unit mass of fabric : 5.1,
3. Woven Fabric count> 6.
4,Breaking strength-grab method,20s >9.2
5. Tearing Strength>12.3
6. Dimensional change in laundering>ISO-675.
7. Color Fastness to ...

View More


Description:

LONG TERM TESTING Analytical Chemistry Laboratory needed for periodically quality control testing silica gel prior to procurement of large quantities to strict quality standards.
Material : SILICAL ? SORBEAD ?R?
Parameters:
1. Chemical composition
2....

Requirements:

Material : SILICAL ? SORBEAD ?R?
Parameters:
1. Chemical composition
2. Shape
3. Color
4. Bead size
5. Pore diameter
6. Pore volume
7. Specific surface area
8. Bulk density
9. Specific Heat
10. Attrition Loss
11. Expected life
12. Crushing St...

View More


Description:

ISO / IEC 17043 Proficiency Laboratory needed for Proficiency Testing in cables:
1. Insulation thickness
2. Conductor Tensile Strength

Requirements:

Mandatory: Laboratories under ISO / IEC 17043

View More


Description:

URGENT Materials laboratory needed for physical and microbiology ASTM testing of tape bituminous wrapping tape used in petroleum pipelines
Property Values Test method
Tensile strength 12 N/mm2 BS 2782
Elongatio...

Requirements:

Property Values Test method
Tensile strength 12 N/mm2 BS 2782
Elongation 300 ASTM D 1000
Tear resistance >50 ASTM D1004
Adhesion to steel >2 AST...

View More


Description:

Physical Laboratory needed for tensile strength testing. High capacity Instron (50kN+) with environmental chamber for elevated temperature (300-400C) tensile strength testing

Requirements:

High capacity Instron
Environmental chamber
Metal bar tensile strength testing at elevated temperatures

View More


Description:

Mechanical Laboratory needed for electrical and mechanical properties testing of 0.40 PVC Shielded cable with 8 22 AWG conductors , we need to get the measures for below:
Measure below Mechanical Properties
Minimum permitted bend radius


Measur...

View More


Description:

Electrical laboratory needed for IEC testing of tape (synthetic) used in the fire resistance cables to sustain up to 800 deg celcius of temperature as per IEC-60331. The dimension of tape is 1) 8.00 mm/ 0.11 mm, We need below tests to be performed:- 1)...

View More


Description:

Physical laboratory needed for Glass strength testing for food container. Glass shock testing for breakage.

Requirements:

Glass shock testing for breakage

View More


Description:

Materials Laboratory needed fo Testing shear strength flatwise testing Fabric base of phenolic sheet sample as per India Standards IS 2036, Phenolic Laminated Sheets

Requirements:

India Standards IS 2036, Phenolic Laminated Sheets

View More


Description:

Aerospace laboratories needed for Fastener tension and shear testing per National Aerospace Standard (Metric) NASM 1312-8 and NASM 1312-13

Requirements:

BC or WA location preferred. Testing according to NASM 1312-8, Aeronautical Fasteners Test Methods - Tensile Strength Equipment and NASM 1312-13, Fastener Test Methods for Double Shear Tests

View More


Description:

Industrial Engineering firm needs performance laboratory accelerated aging process and adhesive strength study testing. The two products bonded together are fabric backed sandpaper and a plastic, 1/2 diameter cylinder. We are testing several different ...

Requirements:

The most realistic test would be torque required to break the sandpaper loose from the cylinder. The torque load on the parts will also be vibrating (not sure that can be tested).

View More


Description:

India Materials Laboratory needed to provide a quote of rates for testing shear strength Flatwise of Fabric base Phenolic sheet as per Bureau of Indian Standard, BIS 2036 Phenol Sheets

Requirements:

Bureau of Indian Standard, BIS 2036 Phenol Sheets

View More


Description:

LEGAL Laboratory needed to test dietary supplements (specifically powder substances used in strength training - i.e. protein powders) for general and specific chemicals and additives.

Requirements:

Must be able to test for GHB or compounds related/derivative of it.

View More


Description:

Packaging laboratory needed for Presence of the Surlyn layer, Thickness of the Surlyn layer, Seal strength, Evaluation for presence of any contaminant on top of the Surlyn layer in film packaging.

View More


Description:

Biophysical Laboratory needed for ISO Testing of medical implant. The material is Metal. It is to ensure that the design does not fail under standardized conditions for example ISO 9585:1990, Implants for surgery -- Determination of bending strength and ...

Requirements:

ISO 9585:1990, Implants for surgery -- Determination of bending strength and stiffness of bone platesand similar standardized conditions

View More


Description:

India Laboratory needed for Mechanical Testing 1 Deflection temperature under load (1.80Mpa) ASTM D648 oC 2 Tensile Strength ASTM D638 M.Pa. Tensile Modulus ASTM D638 M.Pa. Elongation at break at 20 oC ASTM D638 % 3 Flexural Strength ASTM D790 M.Pa. Flexu...

View More


Description:

AUtomotive parts company needs automotive laboratory for General Motors Testing to GMW14609 Corrosion, Simulated 3 g Occupant Load & Downward Strength Test.

Requirements:

GMW14609

View More


Description:

Engineering firm needs USA textiles laboratory for the General testing of the durability of fabric (abrasion, impact, stiffness, tear strength, elongation, thickness). Also need to test the strength of stitches/seams.

Requirements:

I would like to keep my contact information and company confidential.

View More


Description:

URGENT Automotive Laboratory needed to Evaluate automotive products as per Toyota standard.These tests are Characteristics Test, Heat Resistance Test, Water Resistance test, Strength test...etc.Please specify if your laboratory has th facilities to conduc...

Requirements:

Need to follow Toyota standards

View More


Description:

ISO 17025 accredited Medical Device Laboratory needed for ASTM Testing of Hernia Mesh - 3 types (Flexpro mesh, Polyester mesh, polypropylene mesh) ? Cotton Umbilical Tape. Tests required. 1. Stiffness Test as per ASTM-D1388-14. Test may be conducted with...

View More


Description:

Mechanical Laboratory needed for Strength testing of welded eyebolts. Test to failure the tensile strength of 5/16" eyebolts with 3" diameter welded eyes. We have been asked to verify that the bolts will conform to ANCI B30.2 standard

Requirements:

Test to failure the tensile strength of 5/16" eyebolts with 3" diameter welded eyes. We have been asked to verify that the bolts will conform to ANCI B30.2 standard

View More


Description:

Materials laboratory needed for IS or ASTM Testing of bags purchased from vendor: FIBC of 500 Kg capacity made up of HDPE to be tested for Elongation and breaking strength as per the IS or ASTM Standards applicable

Requirements:

Required for evaluating the bags supplied from our customers

View More


Description:

USA Packaging laboratory needed for sample corrugate box strength testing in terms of EU- Newton ECT (kN/m)

For certification for EU - Newton ECT rating of 7.7 kN/m is sufficient for a corrugate box with dimensions of 18"x14"x8" and a payload of 25 l...

Requirements:

I

View More


Description:

India laboratory needed for testing FRP ladder break strength to be tested along with Breaking strength
Weight bearing capacity
Thickness

Requirements:

Breaking strength
Weight bearing capacity
Thickness

View More


Description:

India physical laboratory needed for cement strength test to meet either 425 kilograms per square centimeter, or 525 kilograms per square centimeter,

Requirements:

to test whether meet 425 or 525

View More


Description:

India physical laboratory needed to test Hardboard strength, water absorption etc. Kindly advice oncharges, time etc. with courier services

View More


Description:

Textile laboratory needed for Fabric testing for the Apparel Industry: dry clean testing, elongation testing, fabric thickness, fabric weight, shrinkage testing, tear strength testing. We are trying to compare two fabrics. Both fabrics have come from the...

Requirements:

We are trying to compare two fabrics. Both fabrics have come from the same supplier and the supplier claims that they are the same fabric however they look, feel and fit differently and we would like a 3rd party professional to take a look at it.

View More


Description:

Contract Lab needed for valve testing for Leakage; Hydrostatic Strength; Maximum Flow Shut-off; Strength(bending moment, turning effort, impact); Continued Operation; Corrosion test; Marking Material Adhesion and Legibility.Tests according ANSI 4.6 - MANU...

View More


Description:

Materials laboratory needed for tape certification testing to a specific military requirement. A-A-59341, COMMERCIAL ITEM DESCRIPTION: TAPE, TWO SIDE PRESSURE SENSITIVE ADHESIVE, FLEXIBLE FOAM BASE (FOR USE WITH EXPLOSIVES) (29-SEP-1998) [SUPERSEDING MIL...

Requirements:

A-A-59341, COMMERCIAL ITEM DESCRIPTION: TAPE, TWO SIDE PRESSURE SENSITIVE ADHESIVE, FLEXIBLE FOAM BASE (FOR USE WITH EXPLOSIVES) (29-SEP-1998) [SUPERSEDING MIL-T-60394A]., This CID covers the general requirements for a double coated flexible foam pressure...

View More


Description:

Manufacturer a counter top material with recycled window glass and an epoxy resin binder needs physical laboratory for NSF / ANSI / ASTM Physical Properties Testing
Food Safety:NSF/ANSI 51
compressive strength, tested to ASTM C39
Absorption, tested to ...

Requirements:

Food Safety:NSF/ANSI 51
compressive strength, tested to ASTM C39
Absorption, tested to ASTM c-97-02
Sctratch Resistance/Mohs Hardness
Modulus of Rupture, tested to ASTM c-99
Radon Emissions, compared to EPA-402-r-92-004
PH
Miscibility(in water)
De...

View More


Description:

Materials Laboratory needed for certification testing of PIR Rigid cold insulation,
PIR (Polyisocynurate) foam segments are high-quality insulating materials with excellent properties
and are supplied in pipe sections and slabs. Other types available o...

View More


Description:

Clinical Laboratory needed for clinical testing to substantiate the claims of a toothpaste sample namely provides 12-hour cavity protection, fights cavities, protects gums, removes plaque, removes stains, whitens teeth, strengthens tooth enamel, cleans te...

View More


Description:

PHYSICAL LABORATORY NEEDED FOR SAE TESTING: STRENGTH TEST OF AIRPLANE CARGO NET, UNDER SAE AS 5385C, Cargo Restraint Straps - Design Criteria and Testing Methods

Requirements:

STRENGTH TEST OF A CARGO NET. COMPLY WITH SAE AS 5385C

View More


Description:

FDA GMP Analytical Chemistry Laboratory needed for raw materials testing of 16 ingredients that we need to test to verify that each component meets the specifications for identity, purity, strength and composition according to FDA Current Good Manufactur...

View More


Description:

Clinical Research Laboratory needed for Excercise Group Study / Fitness Product Performance Experiment involving the utilization of our new Fitness Device during a 15 minute daily workout for a period of 90 days; Documented data regarding each individual'...

Requirements:

Documented data regarding each individual's initial weight, body fat, body measurements and arm and leg strengths plus documented data regarding their Fitness Status and Progress every 30 days;

View More


Description:

Asia materials laboratory needed for Tensile strength and water resistance testing of crab shells bioplastics

Requirements:

Tensile
water resistance

View More


Description:

Medical Device Laboratory needed for USP Testing of sutures to
USP 861: Suture- Diameter
USP 871: Suture- Needle Attachment
USP 881 : Surgical Suture- Tensile Strength

Requirements:

Confidential

View More


Description:

Materials Laboratory needed for Physical Testing of Chromadek faced, EPS filled, sandwich panels.
Load testing
Strength testing
Air/water permeability
Fire resistance
Acoustic behavior and more to SANS 54509:2014 / EN 14509: 2013

Requirements:

SANS 54509:2014 / EN 14509: 2013

View More


Description:

India mechanical Laboratory needed for brake vacuum tubes testing Temperature Resistance (High and Low)? Ozone Resistance? Burst Strength? Cold Temperature Impact? Life Cycle Test


Requirements:

? Temperature Resistance (High and Low)? Ozone Resistance? Burst Strength? Cold Temperature Impact? Life Cycle Test

View More


Description:

Physical laboratory needed for materials testing of lamination product for: Tensile & Elongation
Tear Strength
Surface Receptivity & Adhesion (WET & DRY)
Ageing
Low Temp. Flex
Flex Cracking
Porosity
Oil Resistance
Variation in Weight
Weft Distort...

View More


Description:

Asia geotechnical laboratory needed for ASTM Borehole Drilling Core testing Cerchar Abrasivity Index (CAI)-abrasiveness for cutter wear during raise boring and drilling tools (blast holes)
? Multistage Triaxial Test in rock;
? Further UCS and point lo...

Requirements:

ASTM if possible

View More


Description:

Mechanical laboratory needed for mechanical performance testing for evaluation of mechanical failure modes on silicon-based vaginal rings. We are interested in the following mechanical tests (at least 10 samples per test): o Dimensional analysis o Hardnes...

View More


Description:

Southern California Biomedical Laboratory needed for Biomechanical analysis Examine the potential of device for building strength and mass and for rehabilitation

View More


Description:

USA cosmetics consumer products laboratory needed for simulation of tweezer usage testing. Technical testing on different eyebrow tweezers and report findings on key attributes: Metal Grade, Tip Strength, Durability, Tip Precision/Angle, Sharpness and Wei...

Requirements:

Machinery that can simulate tweezer usage for durability study, determine metal grade, weight and balance, and measure angles and sharpness.

View More


Description:

Large electronics company needs United States, Japan or Europe Physical Laboratory for ASTM D2628 neoprene testing: Physical Test for Polychloroprene(Neoprene) Elastic Joint Seal Following ASTM D2628
- Tensile Strength
- Elongation
- Hardness
- Oven A...

View More


Description:

Asia automotive laboratory needed for seat belt testing Test Product : Seatbelt Webbing (only webbing .)

FMVSS 209? Page 26-27

a.Width
b.Elongation
c.Breaking Strength
d.Resistance to light
e.hex bar abrasion ...

View More


Description:

Physical Laboratory needed for comparison testing of two electrical fuse terminals for material strength and hardness, as well as the memory and spring back over repeated insertions. We would send five pcs of both terminals for evaluation. These come from...

View More


Description:

Materials laboratory need for ANSI Testing of window films: test Window film Ansi lab test and strength test

View More


Description:

Materials Laboratory needed for ISO plastic piping testing to ISO 4437:2007 we would like to perform following test on our pipe manufactured with PE100 material, kindly send us testing charges. Sr. no. Characteristic Unit Requirement Test parameter Test ...

View More


Description:

ISO Ontario, Michigan, or New York Biomedical Laboratory needed for Biomedical Testing of Plastic models of the Pelvis (axial torsion, strength until failure, etc.) using an Instron (preferably table top) materials testing machine

Requirements:

ISO - Instron requirements (specifically lower range/table top models - i.e. 8874 table top model)

View More


Description:

Southeast Texas Analytical Chemistry Laboratory needed for amine Testing of MDEA for solution strength. Test MDEA for acid gas mol/mol loading for lean amine and rich amine solvent samples. Test MDEA for H2S content on mol/mol loading for lean and rich ...

View More


Description:

Bergen County New Jersey physical laboratory needed for tensile strength testing of T shaped weld sample with 1" OD chromoly pipe that is .120" thick. Required tensile strength to break the pipe is calculated to be ~60,000 pounds (~100,000psi).

Requirements:

Tensile test, 60,000 pounds, must break our pipe

View More


Description:

Asia polymer laboratory needed for HDPE Testing: Test 3D filaments made of recycled HDPE flakes

Requirements:

Can I please get a quotation and sample requirements (including weight and shape of samples for analysis) for the testing of recycled HDPE for the following:1. Tensile strength ASTM D638 (3 mm, 6 mm/min)2. Tensile elongation ASTM D638 (3 mm, 6 mm/min)3. F...

View More


Description:

USA Sports Laboratory needed for ASTM Testing of Outdoor fitness equipment to pass ASTM: F2276-10, ASTM F1749-09, and possibly parts in ASTM F887 including break strength and durability testing:
ASTM F2276:

Requirements:

Break strength, durability,

View More


Description:

Europe, Holland or Germany Construction Materials Laboratory needed for test method development. Lab that is capable of developing compressive strength test, moisture content, bulk density, drying shrinkage, and modulus of elasticity to ASTM C1693-11

Requirements:

That uses ASTM C1693-11 to perform tests.

View More


Description:

Electrical Laboratory needed for ASTM Testing for dielectric strength, the test shall be in accordance with ASTM D149 and the epoxy thickness in the sample shall be 0.125? thick. Minimum 3 samples.

Requirements:

For the dielectric strength, the test shall be in accordance with ASTM D149 and the epoxy thickness in the sample shall be 0.125? thick. Minimum 3 samples.

View More


Description:

Mechanical Laboratory needed for ASM Testing: Tensile testing yield strength, minimum elongation at fracture

Requirements:

ASTM

View More


Description:

Sensory Laboratory needed for attars, fragrance, and perfume testing to ascertain the strength and the lasting of the fragrance.

View More


Description:

Materials Laboratory needed for Rigid Polyisocyanurate (PIR) and Polyurethane (PUR) testing for building end-use applications. As a mandatory requirement our finished products must comply to the Saudi Standards, Metrology and Quality Organization base on ...

Requirements:

Saudi Standards, Metrology and Quality Org (SASO)with adopted standard number :BSI 4841-1-1:2006 - part 1 - specification for laminated insulation boards with auto adhesively or separately bonded facings.BSI 4841-1-2:2006 - part 2 - specification for lam...

View More


Description:

Materials laboratory needed for ASTM Testing of acrylics that need to be tested or analyzed for seam strength.
These are two acrylics that are glued together from one end. There is a 1mm gap in between the two acrylics. I need to know the seam strength...

Requirements:

International ASTM standards

View More


Description:

Plastic Film manufacturer needs USA weathering laboratory for Accelerated weathering testing
Tensile strength (Before and after weathering)

View More


Description:

Europe Packaging Laboratory needed for Flexible Packaging testing - OPP-OPP
o Chemical composition of the Material
o Coefficient of friction (CoF)
o Seal and Bond strength ( Foil )
o Sealing range ( Foil )
o Barriere properties guarante...

View More


Description:

Europe FDA GMP Biophysical Laboratory needed for ASTM Testing to ASTM F 2392-04 Standard Test for Burst Pressure Strength of Surgical Sealants.
Need to evaluate surgical sealants strength using the ASTM F 2392-04 Standard Test Method for Burst Pressure S...

Requirements:

GMP

View More


Description:

Large textiles company needs ISO fabric testing of a wide-ranging emergency relief goods to Attest BS tensile strength for fabric after exposure to UV and moisturizing climate simulation. Exposure in a climatic chamber under ISO 4892-2, type A, 360 hours...

View More


Description:

LONG-TERM QC: USA FDA GMP Pharmaceutical Analytical Chemistry Laboratory needed for UP QC Raw Material Testing:
Gel Strength (Bloom Value) Test following USP 37-NF32, for at least 1 Gelatin raw material sample.

Also, Surface Area Test following USP ...

Requirements:

USP, current version, FDA, GMP

View More


Description:

Europe Accredited materials laboratory needed for fiber testing: -fibre determination and composition(%)
-oil rate (%)
-fibre linear density
-number of crimp
-fiber shortening rate due to crimp
-fiber section shape
-single fiber tensile strength (ma...

View More


Description:

East Coast USA ASTM or ISTA certified Laboratory needed for Automotove Packaging Testing: ASTM D4169 shock and vibration as well as compression testing 1-2 packages with automotive steering gear assemblies.

ASTM D4169 for shock and vibration

Compr...

Requirements:

ASTM or ISTA certified

View More


Description:

China materials laboratory needed for adhesive testing: Shear strength and viscosity test needed for for solvent based adhesive

View More


Description:

Medical Device Manufacturer needed for accelerated aging and post accelerated aging tests medical orthopedic implant. The specifications are Medical package (ISO 11670) -Accelerated ageing ASTM F1980 Visual test ASTM F1886 -Seal Strength /peel test ASTM F...

View More


Description:

Asia Packaging Laboratory needed for Laboratory testing required for paper egg tray and its allowable limit for the following parameter:
1. Tensile strength
2.Compression
3. Waterproofness
4. Moisture

Requirements:

Based on ISO standard requirement.

View More


Description:

Europe, Switzerland, Germany, Italy or Scandinaia Laboratory needed for metal testing two metal strips: a) 0.5 mm Steel and b) 1.5mm Aluminium for the following:

1. Mechanical strength - resistance to static forces
2. Heat resistance
3. Electrical...

Requirements:

Please suggest a standard for arc flashover resisitance tests.

View More


Description:

Saudi Arabia or UAE geology laboratory needed for ASTM testing of marble and granite stone for physical properties similar to compressive strength, flexural strength to ASTM C503 and ASTM C615

Requirements:

ASTM C503 and ASTM C615

View More


Description:

Russia Mechanical Laboratory needed for ASTM Testing: Tensile strength for fiber-reinforced polymer bars to possibility using this product in construction Engineering. Number of samples -5.

Requirements:

ASTMWe wish your contact information and company to remain Confidential.

View More


Description:

Mechanical Laboratory needed for mechanical testing to EN 13121-3,GRP tanks and vessels for use above ground. Design and workmanship

a. Textile Glass Content
b. Unit Modulus of Tensile Elongation
c. Tensile Strength at Rupture
d. Inter laminar S...

Requirements:

Confidential

View More


Description:

Brazil Geotechnical Soil Testing Laboratories needed for ASTM Testing or S Testing: Soil Analysis for Classification, Strength, Consolidation and Chemical Testing

Requirements:

ASTM or BS

View More


Description:

Product Safety Laboratory needed for anti-retroviral testing: Intravaginal ring containing antiretroviral compounds. Condom Compatibility testing to include the following:
1. air burst pressure and volume
2. tensile strength
3. viral particle penetrati...

View More


Description:

Packaging Laboratory needed for puncture resistance comparison study of flexible packaging materials. Would like to compare our structure to a competitor's. The structures are from multiwall bags used in Petcare industry. Thickest material is a 5-ply str...

Requirements:

Do not currently have any standards but open to suggestions for ASTM standards.

View More


Description:

Cosmetics consumer products laboratory needed for ethnic hair care formulation testing of 2 in 1 tingling shampoo & conditioner, hot grow hair & scalp treatment conditioner, anti-breakage strengthening cream, temple & nape grow balm, intensive spot serum ...

Requirements:

confidential

View More


Description:

Plastics Laboratory needed for peel strength test machine according to BS EN 13121-3;2008 and other relevant standard to check the peel strength of thermoplastic lined frp laminate.

View More


Description:

Electrical Laboratory needed for Electrical testing according to ANSI/AAMI EC 53 of leadwires for ECG electrodes. (Dielectric strength, noise testing,...)

Requirements:

ANSI/AAMI EC 53

View More


Description:

Pultrusion company looking for Europe plastics laboratory for ISO mechanical, electrical and heat testing s for pultruded FRP profiles. Would help, if most of the test could be done at the same test lab.

Requirements:

Confidential? Tensile strength ISO 527? Impact strength ISO 179? Flexural strength ISO 178? Compressive strength 604? E-modules? Insulation strength IEC 243? Comparative Tracking Index IEC 112? Flammability UL94? Surface and volume resistivity IEC 93? Arc...

View More


Description:

University researcher needs Materials Laboratory for polymer testing of newly synthesized 05/29/1 polymers of nanocomposites of acrylonitrile.Polymer Properties properties testing of these polymers such as density , tensile strength and tear strength.

View More


Description:

USA FDA cGMP Laboratory needed for Solid, spray dried protein powder analysis Requested Analyses:
- Foaming (will the hydrated powder form foam? Provide pictures of foamed solution)
- Foam Density and Percent Overrun
- Foam Stability
- Heat Gelation ...

Requirements:

FDA

View More


Description:

Materials Laboratory needed for ASTM Testing on dry wall for the following ASTM standards: ASTM International standards ASTM E 72 strength ASTM E 96 water vapor transmission ASTM C518 Thermal transmission ASTM E 2099 structural transmission ASTM E331 wate...

View More


Description:

Materials Laboratory needed for strength testing to compare rotating beam corrosion fatigue strength of stainless steel with that in air. Specifically testing to 10,000,000 cycles at stress levels in the range of 35ksi to 90 ksi in concentrated chloride s...

View More


Description:

Polymer Laboratory needed for polymer testing studies and failure analysis study: ECE (R-110 and R-67) requirement testing on several polymers and plastics used in parts we produce. The following tests include: -Compressed natural gas (CNG)/Liquefied petr...

View More


Description:

Materials Laboratory needed for materials testing: strength testing of Calcium Carbonate

View More


Description:

Plastics Laboratory needed for polypropylene testing of 6 samples of PP and I would like them tested for the following characteristics:-

1. MFI (/10 min)
2. Density g/cm3
3. Tensile strength MPa
4. Tensile elongation MPa
5. Fexural modulus Mpa

...

View More


Description:

Plastics laboratory needed for validation testing for XLHDPE and LLDPE material used in the manufacture of DEF tanks for Navistar. As described; 1. Soak 10 tensile bars of the LLDPE material (and XLPE material for a baseline) in room temperature DEF solut...

View More


Description:

India analytical chemistry laboratory needed for gel strength testing of cassia powder

Requirements:

gel strength testing

View More


Description:

IV sets and IV extension sets manufacturer needs physical laboratory for IV testing: Tensile testing done to check the bond strength on the luer to tubing connections that we make here by a solvent bonding process.

View More


Description:

Canada or USA Food Laboratory needed for liqueur testing: Alcohol Testing for Alcoholic Strength (% alc.v/v) testing required for cream liqueur.

Requirements:

Contact Information & Company to remain CONFIDENTIAL

View More


Description:

Consumer Products Materials Laboratory needed for ASTM Testing to ASTM E2187-04, Standard Test Method fro Measuring the Ignintion Strength of Cigarettes.

View More


Description:

Middle East, Asia Mechanical Laboratory needed for automotive parts testing to 6311:2005 -MOTOR VEHICLES METHODS OF TESTING BRAKE LININGS - PART 1: INTERNAL SHEAR STRENGTH OF LINING MATERIAL ISO 6312:2007-Road vehicles - Brake linings - Shear tes...

Requirements:

6311:2005 -MOTOR VEHICLES METHODS OF TESTING BRAKE LININGS - PART 1: INTERNAL SHEAR STRENGTH OF LINING MATERIAL ISO 6312:2007-Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies ISO 6313:...

View More


Description:

California Laboratory needed for physical testing on asphalted Kraft paper (building product)samples, 3 different basis weights on the following: DRY TENSILE STRENGTH (ASTMD828) WATER VAPOR TRANSMISSION (ASTME96 Desiccant method at 74.3) WATER RESISTANCE ...

View More


Description:

Western USA physical laboratory needed for concrete testing: Compressive strength of concrete before and after exposure to 500 F, 700 F, 900 F (to be determined). Laboratory must have Furnace that can accomodate standard core samples, 6 inch diameter by 1...

Requirements:

Furnace that can accomodate standard core samples, 6 inch diameter by 18 inch tall

View More


Description:

Manufacturer of PVC Conduits Pipes and fittings , needs approved laboratory for materials testing: British Standard tests in the British Standard BS 6099 Part1 , BS 6099 Part 2, section 2.2, BS 4607-1 and BS 4607-5 which incluled following: 1- Dimensions ...

View More


Description:

Materials Laboratory needed for mechanical testing: Average Bending Strength - AS/NZS2908.2- Density (oven dry) - AS/NZS2908.2- Watertightiness - AS/NZS2908.2- Water Absorption - ASTM C1186- Moisture Content - ASTM C1186- Dimensional Conformance - AS/NZS2...

View More


Description:

Biomechanical laboratory needed for USP Testing: Biomaterial testing for properties of bio materials for sutures mechanical and biological tests as per USP standards for needles and sutures [knot pull, tensile stregth, straight pull, needle attachment, s...

Requirements:

testing as per USP standards - will provide protocol and samples to test lab.

View More


Description:

USA Biophysical Laboratory needed for ASTM Testing to ASTM F 2392-04 Standard Test for Burst Pressure Strength of Surgical Sealants.Need to evaluate surgical selants strength using the ASTM F 2392-04 Standard Test Method for Burst Pressure Strength of Su...

Requirements:

ASTM

View More


Description:

Materials Laboratory needed for BS / IEC Testing: electrical breakdown strength test in accordance with British Standards Specification: BS 5874, Method for determination of the electric strength of insulating oils to investigate how the electrical breakd...

View More


Description:

Materials Laboratory needed for ceramic testing: F 417-87 Flexural testingMohns scale and Rockwell 45N scale for hardness testingTensile and compressive strength testingC 408 Thermal conductivity testingD 149-97A Dielectric strength testingCeramic sample...

Requirements:

F 417-87 Flexural testingMohns scale and Rockwell 45N scale for hardness testingTensile and compressive strength testingC 408 Thermal conductivity testingD 149-97A Dielectric strength testingPlease keep contact information confidential

View More


Description:

Dental composite filling material manufacturer needs accredited laboratory for Biocompatiability Testing, PHysical Testing and EN ISO Testing EN ISO 4049:2009 standard procedure and also provide us the test result reports as they are also indicated in t...

View More


Description:

Dairy Manufacturer needs India Packaging Laboratory for packaging film testing to ISO 22000:2005 requirement,We need to test all our milk film and migration for PP,PET and LDPE materials at NABL accredited Lab.Henceforth we need the sutable labaratory add...

View More


Description:

Materials laboratory needed for ASTM Testing. Epoxy Testing of cured 2-part epoxies for Dielectric Constant ASTM D1304 Dielectric Strength ASTM D1304 Volume Resistivity ASTM D1304 Surface Resistivity ASTM D1304 Dissipation Factor ASTM D1304 Secondary Line...

View More


Description:

Manufacturer of Fiber reinforced plastic products like tanks, vessels, scrubbers etc. needs plastics laboratory for ASTM Testing: the coupon testing in mumbai as per our specified astm standards as mention below 1) Flexural Strength & Flexural modules- AS...

View More


Description:

Materials Laboratory needed for materials ASTM Testing to ASTM 695/ ASTM 638/ASTM 648/ASTM D570/ASTM D149 on HDPE sub-flooring channel or track that sits between flooring and joist. The parameters we require tested include: compressive strength, tensile ...

Requirements:

ASTM 695/638/648/D570/D149

View More


Description:

Geology Laboratory needed for stone geophysical testing: analysis on our natural stones including: analysis are: freezing, compressive strength, flexural strength, flexural strength under concentrated load, breaking load, determination of the breaking loa...

View More


Description:

FDA GLP Medical Device Laboratory needed for adhesive testing to evaluate physical properties of hydrocolloid adhesives - such as adhesive strength, removal force on human skin; preferably living human skin or a well-documented substitute

Requirements:

May need testing to be conducted under GLP conditions with results useable for submission to regulatory agencies.

View More


Description:

Large Manufacturer needs physical metallurgical laboratory for metallurgical testing: ASTM Testing to measure fracture energy of drop weight tear test (ASTM E 436) on high strength pipe grades 13 mm thick.

View More


Description:

Plastics Laboratory needed for plastics testing: Basic plastics tensile testing of plastic chain lengths approximately 1 metre long. Anticipated tensile less that 8000lbs.
Multiple samples to establish Average Ultimate Strength.
no special handling requ...

Requirements:

numerical results and video verification

View More


Description:

Canada materials laboratory needed for physical Testing of lighting for physical and optical properties: Hardness, specific gravity, tensile strength, tensile elongation, flexural modulus, melt index, impact strengthOptical: transmission loss, refractive...

Requirements:

ConfidentialPhysical: Hardness, specific gravity, tensile strength, tensile elongation, flexural modulus, melt index, impact strengthOptical: transmission loss, refractive index, numerical aperture

View More


Description:

Accredited and regulated Bioanalytical and toxicology laboratory needed for bioanalytical testing: Human tissue cyctoxicity, DNA quantitation, Histology, Biochemical, Biomechanical strength

Requirements:

Please remain confidential

View More


Description:

Engineering Laboratory needed for physical Laboratory Testing of Concrete mixes: Density of Hardened Concrete Compressive Strength of Concrete Cube Compressive Strength of Concrete Core Making & curing of Concrete Cubes Slump Tests Air Content -Reinforce...

View More


Description:

India construction laboratory needed for failure analysis of factory building to analyze each existing building factory building for durability and strength.

View More


Description:

Publisher needs USA packaging laboratory for packaging testing. corrugated cartons tested:

- basis weight
- bursting strength
- edge crush test

View More


Description:

Plastics Laboratory needed for ASTM Testing of Polyethylene lined material to establish various measures. 1. Physical tests? a. Hardness test (ASTM D 2240), b. Density test (ASTM D 792 or ISO 1183-1), c. Thermal expansion test (with Netzsch dilatometer), ...

View More


Description:

Philippines Laboratory needed for physical testing that can determine the durability/strength or Brittleness of a Plastic Container. Your responsed is highly appreaciated. regards,

View More


Description:

Southern California Plastics Laboratory needed for random third party testing: quality control testing of our production line for: tensile, impact, heat distortion, moisture, etc. for engineering resin

Requirements:

These are the type of tests we require; Tensile Strength, Tensile Elongation, Flexural Modulus, Flextural Strength, Izod Impact, Density, Melting Point, Shrinkage, Filler Content

View More


Description:

USA Plastics Laboratory needed for polyester testing : Test Polyester Sewing Thread Test Thread per Fed STd-191 Method 4804&5804.

Requirements:

Verify Thread to FED-SPEC-T-285, Type 1,Class B,Size F and Fed Std-191. 80% of original breaking strength after 500 Hour of exposure. Thread MFG: Eddington

View More


Description:

USA Plastics Laboratory needed for Fiber reinforced Plastic coupon testing 1) Glass content, wt percentage. 2) tensile strength, 3) flexural strength, 4) tensile modules, 5) flexural modules 6) peel test & lap shear test for Pvc Frp coupon.

Requirements:

1) Glass content, wt percentage. 2) tensile strength, 3) flexural strength, 4) tensile modules, 5) flexural modules 6) peel test & lap shear test for Pvc Frp coupon.

View More


Description:

Asia geology laboratory needed for physical testing for Density, Water Absorption, Dry Compressive Strength, Dry Bending Strength, Water Saturation Bending Strength etc

View More


Description:

Texas medical device laboratory needed for suture testing for the Tensile strength of four suture types (total of 160 samples)

Requirements:

Need to test suture material tensile strength - ultimately determining breakage (failure) strength

View More


Description:

UK research and development laboratory needed for comparison testing of agar material for gel strength, boiling point, melting point etc. solidifying agents for growth culture media. i have gotten some plant materials that can be used as substitute to ag...

Requirements:

like gel strength, boiling point, melting point etc.

View More


Description:

Preclinical laboratory needed for in vitro testing 1) In Vitro Coagulation test2) InVitro Bio-adhesive strength measurement3) Primary skin irritation test4) Intracutaneous test5) systemic injection test6) Determination of efficacy of novel dressing in a l...

Requirements:

The tests we need are:1) In Vitro Coagulation test2) InVitro Bio-adhesive strength measurement3) Primary skin irritation test4) Intracutaneous test5) systemic injection test6) Determination of efficacy of novel dressing in a lethal artrial model in swine7...

View More


Description:

Canada or USA Physical Laboratory needed for ASTM Testing of Metallic materials: Tensile test of
Aluminum 5052 H32 sheet metal roll with thickness= 0.61 mm and width=42 mm.
Results needed: UTS, yield strength, elongation, reduction of area, initial a...

Requirements:

ASTM E8

View More


Description:

Medical Device Physical Laboratory needed for ASTM Testing: Burst Strength of Surgical Sealants according to ASTM F2392

Requirements:

ASTM F2392

View More


Description:

West Coast USA materials laboratory needed for Pull testing for adhesion strength and Hardness test on a coating that has porosity

Requirements:

Checking specs of a Atmospheric Plasma Coated microstructure

View More


Description:

Plastics laboratory needed for ASTM Testing of 7-8 samples of vinyl sheet piling. Tensile strength, IZOD impact, transmissivity and equivalent permeability, heat deflection, and UV stability degradation.

Requirements:

ASTM

View More


Description:

India tetiles laboratory needed for towel testing: whiteness of the towel, strength, yarn count etc.

View More


Description:

Africa geology laboratory needed to conduct chercher abrasivity index tests (CAI). I would also like to have UCS, tensile strength Modulus of elasticity, permeability, cohesion and phi values for suite of medium to hard strong rocks.

View More


Description:

USA laboratory needed for controlled atmosphere hot rolling of graphite and graphite fluorination synthetic chemistry. Also AFM indenter, tensile, bending,
hardness, yield strength,toughness- energy to rupture, ballistic
testing of materials.

Requirements:

We are applying for grant funding and want cost estimates as soon as possible.

View More


Description:

India textile laboratory needed for DIN Testing of nonwoven geo textil as per DIN method for the following properties

Sr. No


Property


Unit


Standard


Y/N


Price

1


Mass


(g/m2)


DIN 53854






...

Requirements:

DIN

View More


Description:

India Materials Laboratory needed for ASTM testing: a. Softening point/ ®C
b. Heat resistance/®C
c. Flexibility in cold term (at -20®C) (Cold Test)
d. Viscosity at 180®C
e. Processing temperature
f. Open time (in sec)
g. Cure time (in sec)
h. Colo...

Requirements:

ASTM

View More


Description:

Canada or USA Mechanical Laboratory needed for Mechanical shear strength testing of shear pins on 10 samples to determine manufacturing & material variability

Requirements:

Contact and company to remain confidential

View More


Description:

Physical Laboratory needed for ASTM testing foam insulation for tensile strength to ASTM D1623, Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics at cryogenic temperatures (-265 F / -165 C). Can you do such testi...

Requirements:

ASTM D1623 at cryogenic temperature

View More


Description:

Mechanical Laboratory needed for mechanical testing: test one sample ACSR Zebra conductor as per BS EN 50182 for Type Test ,the detail as per below;
1) Breaking Strength Test
2) Stress-Strain Test

Requirements:

BS EN 50182

View More


Description:

Asia geology laboratory needed for geophysical testing of andesitic rock for mpa and abrasion index and unconfined compressive strengths

View More


Description:

Physical Laboratory needed for solar panel testing for strength of the our racking system against wind and snow load. Tensile test for racking system (including end clips, mid clips , nuts and bolts) is a good idea to prove strength of the system against ...

View More


Description:

India Packaging Materials Laboratory needed for packaging testing: Optimized temperature and compression pressure or torque for induction heat sealing of wax coated liners with sealant layers of plastics on aluminium foil laminated with pulp or foam backi...

Requirements:

Induction Heat Seal Strength tester - to optimize sealing temperature and torque or compression pressure.

View More


Description:

Medical Device Materials Laboratory needed for ASTM Testing to ASTM D695: comparative compression strength test on two mouth guards, one manufactured by ourselves, and another by another company. Need to know cost, test turnaround time and sample sizes n...

Requirements:

ASTM D695

View More


Description:

Textile Laboratory needed for towel testing. I want a report on sample of towels. 24 x 48. I want to know about the quality and strength of the product.

View More


Description:

India polymer laboratory needed for polymer synthesis required for 6 new novel bio-monomers plus polymer fundamental properties testing and polymer testing their ability to be used in PU, PE and PC's. Fundamental physical properties - mol weight, crosslin...

Requirements:

Fundamental physical properties - mol weight, crosslinking, strength.

View More


Description:

East Coast USA laboratory needed for stability testing, sin sensitivity testing and microbiology testing of nail care products - base coat, top coat, strengthener, quick dry, cuticle remover, nail polish remover

View More


Description:

Aia Electrical Laboratory needed for electrical and Physical testing of Cat5e FTP cable:
Item testing, Rating testing, Conductor Resistance Testing, Mutual Capacitance Testing, Dielectric Strength Testing, Spark Testing, Flame Retardant Testing, Characte...

Requirements:

N/a

View More


Description:

Physical Laboratory needed for ASTM Testing to ASTM C1147 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics. Tensile testing of 95 pieces of welded cpvp and pvc.

Requirements:

ASTM C1147

View More


Description:

Middle East ISO 17025, UKAS Materials Laboratory needed for proficiency testing for cement(chemical test, loss on ignition, setting times, compressive strength), we want two samples for our labs the headquarter and our lab branch

Requirements:

ISO 17025, UKAS

View More


Description:

USA Packaging Laboratory needed for ASTM Packaging Testing ASTM D882Elongation at Break ASTM D882Shrinkage ASTMD1204Permeability ASTM D1484Permeability Vapour ASTM E96 to be done on foil pouch like packaging

Requirements:

Specific WeightTensile Strength ASTM D882Elongation at Break ASTM D882Shrinkage ASTMD1204Permeability ASTM D1484Permeability Vapour ASTM E96

View More


Description:

South Africa physical laboratory needed for tensile strength testing of tents

View More


Description:

Materials Laboratory needed for ASTM Testing: Taber loss (by ASTM D3389, Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)) - Tear strength (by ASTM D624, Standard Test Method for Tear Strength of Conventional Vulcanize...

View More


Description:

Optics company needs Physical Laboratory for magnet strength testing

View More


Description:

Adhesive tapes Manufacturer needs India materials laboratory for physical testing: Peel strength & Shear Strength Test for our product at various parameters as mentioned below , Request you to provide your lowest possible Quote for the same. Si.no Type of...

View More


Description:

Physical, Mechanical Laboratory needed for physical BS EN testing to BS EN 50182: ACSR Bison Type Test 1(One)sample .

1.Verification of construction
2.Stress - Strain test
3.Tensile Breaking Strength
4.Stringing Test
5.Tests on The Alu. Wires
6...

View More


Description:

Europe ISO, UKAS Physical Laboratory needed for ASTM physical testing. Ceramics Testing: High temperature dilatometry, creep resistance and strength

Requirements:

ISO, ASTM, UKAS

View More


Description:

Physical Laboratory needed for epoxy bond testing to ZTV SIB 87 bond/pull off testing of epoxy coating applied to concrete substrate . Compressive strength,abrasion resistance and modulus of elasticity

Requirements:

ZTV SIB 87 bond testDin 1164 compressive strengthDIN 53754 abrasion testingSIA 162/1 modulus of elasticity

View More


Description:

Materials Laboratory needed for ASTM Testing for Facing material properties 1 Vapor Permeance ASTM E 96, Procedure A 2 Bursting Strength ASTM 774 3 Puncture Resistance ASTM C 1136 4 Tensile Strength ASTM C 1136 5 Mold Resistance ASTM C 655/ C 1338 6 Dimen...

View More


Description:

USA electrical labroatory needed for polymer/ceramic testing: Dielectric constant and dielectric strength of polymer/ceramic nanocomposite

Requirements:

Please keep info confidential.

View More


Description:

Materials laboratory needed for ASTM Testing: Facing material properties in your Laboratory .
1 Vapor Permeance ASTM E 96, Procedure A
2 Bursting Strength ASTM 774
3 Puncture Resistance ASTM C 1136
4 Tensile Strength ASTM C 1136
5 Mold Resistance A...

View More


Description:

North Carolina Bioanalytical Laboratory needed for ASTM Testing to ASTM F2458-05, Standard test for wound closure strength with a cyanoacrylate topical skin adhesive.

Requirements:

ASTM F2458-05

View More


Description:

Acoustics and Plastics Laboratory needed for JIS testing to the standards methods below of a bonded plastic sheet with a tissue layer with 2mm of total thickness. * JIS K 6850 - Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bo...

View More


Description:

A2LA Materials Laboratory needed for ASTM anticorrosive testing of anticorrosive system for pipes, this system has several layers methods. ASTM G21 Resistance to fungi to high density polyethilene geomembrane. ASTM D70 Specific Gravity a 25C to primer (s...

View More


Description:

US Physical Textile laboratory needed for testing of children's tights. Tensile, Burst, Tear Strength, Colorfastness to Crocking, Colorfastness to Dry-Cleaning, Colorfastness to Perspiration, Colorfastness to Non Chlorine Bleach, Pilling resistance, Rand...

Requirements:

ASTM, AATCC

View More


Description:

INDIA OR ASIA PRECLINICAL LABORATORY NEEDED FOR ISO, ASTM, USP PRECLINCIAL TESTING: IN-VITRO BREAKING STRENGTH RETENTION TEST FOR ABSORBABLE SURGICAL SUTURE

Requirements:

ISO / ASTM / USP

View More


Description:

Electrical Laboratory needed for DIN Testing: Dielectric strength testing, Dielectric dissipation factor (tanä) testing , Volume resistivity testing, Surface resistivity testing, Dielectric constant testing

Requirements:

DIN

View More


Description:

Mechanical Laboratory needed for Impact testing: Impact strength at low temperature (Steel ball mass 1000±50gDrop height 200 mmImpact energy 2 JTemperature -30±2°C)and Point load 75kg at 23°C (Point load, a flat round test body with diameter 100 mm and ed...

View More


Description:

Physical Laboratory needed for material strength and galvanized quality testing of telecommunication steel tower. Following items are included for testing. 1. Nut and bolt (grade 8.8 & 4.6 ) 2. 'L' angles Please give your clear instruction for how we take...

View More


Description:

Plastics Laboratory needed for Quality COntrol Testing, acrylic testing of acrylic used for the see-through tank wall of a new shark tank to be installed within a new world class aquarium under construction in the Salt Lake City area. The manufacturer is...

View More


Description:

Eastern USA pharmaceutical FDA GMP laboratory needed for FDA GMP pharmaceutical testing: strength, stability, and microbial growth. Also a strategic process to conduct these testing. Standard Procedure Operation.

Requirements:

GMP- We would like for our contact information and company to remain Confidential.

View More


Description:

Materials Laboratory needed for ASTM Testing and ISO Testing of Glass Samples: 30 Glass samples to be tested for:
- Compressive Strength
- Thermal Cycling
- Leachability
- Product Consistency Test (PCT)
- Vapor Hydration Test (VHT)

Rough glas...

Requirements:

Approved (ASTM, ISO) methods required.

View More


Description:

Eastern USA Mechanical Laboratory needed for ASTM mechanical, materials, chemical, electrical testing ASTM B 250, testing the resistivity and tensile strength of wire.

Requirements:

ASTM B 250

View More


Description:

India, Asia Materials Laboratory needed for ASTM Testing:
1) Heat Transmission coefficient
2) Rigidity - ASTM C393
3) Elongation - ASTM D638
4) Deflection Temperature under load - ASTM D648
5) Coefficient of Linear Thermal expansion : ASTM D696
6) ...

Requirements:

ASTM

View More


Description:

West Virginia Geotechnical Laboratory neded for onsite Proctor Testing for Compaction
Load Test for Micropiles
ASTM D 4435 for DCP Anchors
ASTM A 4435 for Rock Bolt Anchor Test
ASTM C 109 for Cement Mortors
ASTM C 39 for Compressive Strength of concr...

Requirements:

Confidential

View More


Description:

Singapore Mechanical Laboratory needed for ISO Testing and ASTM Testing to ISO 527-1ASTM E1461ASTM D150 Tensile Testing for: Tensile Modulus, Tensile Strength and Nominal Strain @ break

Dielectric for Dieletric constant and dielectric strength

Therm...

Requirements:

ISO 527-1ASTM E1461ASTM D150

View More


Description:

USA Materials laboratory needed for materials testing: Water Adsorption testing,
Crush Strength testing, (N)
Residual Water testing,
Particle Size Distribution testing

View More


Description:

India Plastics and Polymers Weathering Laboratory needed for Weathering testing for Plastic films (Humidity: 10% to 90 %) followed by tear strength.

View More


Description:

Toronto electrical laboratory needed for DIELECTRIC STRENGTH testing. Preferable in the Toronto area.

View More


Description:

Geophysical Laboratory needed for compressive strength testing of rock sample in MPA and also the geology type of the sample.

Requirements:

n/a

View More


Description:

EASTERN USA ELECTRONICS LABORATORY NEEDED FOR ELECTRICAL SAFETY TESTING for LVD using IEC 61010-1:
>> Ground bond test
>> Insulation resistance test
>> Dielectric strength test
>> Line leakage test

Requirements:

This RFQ is for testing and a report with the results and limits. We are not seeking an opinion or declaration of CE compliance.Google Koehler K23700 for the product we wish to test wish to test. The RFQ is for just this piece of equipment for now.

View More


Description:

USA Medical Mechanical laboratory needed for strength analysis to evaluate risk management of plastic component for use in medical device products.
This evaluation is necessary to discover the real possibility and conditions on which the component could...

Requirements:

We do not know specific standardWe wish our contact information and company remain confidential

View More


Description:

Eastern USA Mechanical Laboratory needed for Mechanical Testing on a Clamp Mil Spec testing on a clamp assembly. 4.5.1 Hydrostatic Pressure4.5.2 Static Operating and Proof Pressure Leakage Test.4.5.3 Tensional Moment4.5.4 Vibration Performance4.5.4.1 Vib...

Requirements:

4.5.1 Hydrostatic Pressure4.5.2 Static Operating and Proof Pressure Leakage Test.4.5.3 Tensional Moment4.5.4 Vibration Performance4.5.4.1 Vibration-Structural Integrity4.5.4.2 Resonance Search4.5.5 Pressure Cycle4.5.6 Flexure Cycling4.5.8 Coupling Half St...

View More


Description:

Consumer Products Laboratory needed for efficacy testing for copper(II)chloride solution product 'Native blue' algaecide or improve water strength against water born bacteria, algae & fungi to reduce chlorine consumption. Our product 'Native blue' use in ...

View More


Description:

Europe Microbiology Laboratory needed for Efficacy Testing for algacide & bacteriacide product of copper(ii)chloride solution to improve water strength against water borne algae & bacteria to reduce chlorine consumption.

Requirements:

Any specfiction suit Middel East & Gulf market.

View More


Description:

Israel Physical Laboratory needed for ASTM Testing: Burst Strength and peel strength test of plastic lidding film to tray to ASTM F1140 ASTM F2824-10 ASTM F2054

Requirements:

ASTM F1140 ASTM F2824-10 ASTM F2054

View More


Description:

Canada FDA GLP GMP UKAS, A2LA, AAALAC physical laboratory needed for GMP Testing of Low Density Polyethylene lay flat tube, operating pressure, tensile and tear strength

Requirements:

Any; FDA, GMP, GLP, UKAS, BAM, A2LA, AAALAC, EPA, ISTA, CPSC, IEEE, DIN, USP, ASTM, ISO

View More


Description:

Sri Lanka materials laboratory needed for plaster of paris testing: Setting Time,Whiteness,Strength,Purity

View More


Description:

Canada materials laboratory needed for lubricant testing: Dielectric Strength testing in spray can. One sample.

Requirements:

Please keep our contact information confidential

View More


Description:

Canada Plastics Laboratory needed for ASTM, BS, CS, BS, AS, DIN LDPE Testing for Mechanical properties of LDPE lay flat tube;  Tube stretch limit Tensile and tear strength in both direction (N/50mm, N), operating pressure (m of water)
Sample; one piece...

Requirements:

either of ASTM,BS, CS, BS, DIN, and AS (Australian Standard)

View More


Description:

India Consumer Products laboratory needed for consumer product Efficacy studies of cream and shampoo.Anti irritant properties,Transepidermal water loss, hair shine, Anti ageing effect, hair strength

Requirements:

no

View More


Description:

Mechanical Laboratory needed for Instron Strength testing to Identify the compression resistance range for six EVA foam products.

Requirements:

Please keep my contact information Confidential.

View More


Description:

Analytical chemistry needed for hydrocarbon testing: 1. Crude oil naphthenate screening-test 2ea
2. Crude oil sodium emulsion screening-test 2ea
3. Apparent dynamic viscosity vs temperature per shear rate ( dead crude)-test 10ea
4. Apparent dynamic vis...

View More


Description:

Physical Laboratory for cement testing: standard tests on cement,
Consistency,initial/Final setting time ,Compressive strength,Soundness

Aggregates -gradation,Impact & crushing value

View More


Description:

Large Chemical Company needs Texas physical laboratory for ASTM Testing and ISO Testing of polypropylene PP pellets specimens:
Izod Impact, 23C Notched with Procedure A, ASTM D4101
Izod impact, Notched @ 23degC ASTM D256
Izod impact, Notched @ 23de...

Requirements:

Need to follow the appropriate ASTM and ISO methods noted above.

View More


Description:

US FDA cGMP physical chemistry laboratory needed for cGMP Testing for Gelatin Gel Strength (Bloom value)according to Ph. Eur.

Requirements:

cGMP

View More


Description:

South Africa geotechnical laboratory needed for ASTM Testing: uniaxial compressive strength, tensile strength and shear strength of bore core samples

Requirements:

ASTM

View More


Description:

USA biomechanical laboratory laboratory needed for USP Testing, surgical suture tensile strength (straight tensile and knot tensile USP 881), and diameter (USP 861), 30 samples each test, non-absorbable, non-sterile

Requirements:

USP contact information confidential

View More


Description:

Physical Laboratory needed for compressive strength analysis of Glass Ionomer cement with Instron machine having maximum compressive strength of 500 megapascals,with mechanical tester capable of being operated at a cross-head speed of (0.75+ or - 0.30) mm...

View More


Description:

Engineering Firm needs electrical laboratory for ASTM, Dielectrical Testing:Dielectric strength (ASTM D-149) (IEC 243-1 Electrical insulation purpose. Evaluation of paper samples
- Between 50 and 70 microns thick
- Between 40 and 60 gsm

Requirements:

Dielectric strength (ASTM D-149) (IEC 243-1)Dielectric constant (60 Hz)(ASTM D-150)Dissipation factor (60 Hz)(ASTM D-150)Volume resistivity (ASTM D-257)Voltage endurance (ASTM D2275 360 Hz)Thermal conductivity vs temperature (ASTM E1530)

View More


Description:

Biomechanical Laboratory needed for potting and torsional testing of approximately 30 rat femurs to failure. Data to be collected will include the torsion to failure and shear modulus of the material. Typical failure strengths have been recorded in the r...

View More


Description:

Large Beverage Mfg needs Canada Physical Laboratory for Conduct steel strength testing on grade 8 steel bolts. Several bolts have failed recently and we would like to know if the bolts are defective

Requirements:

Confidential

View More


Description:

Europe mechancial and materials laboratory needed for ASTM TEsting RTV silicone testing to ASTM 412a and ASTM 624c:
1. tensile test (ASTM412a), 30 samples
2. tear strength test (ASTM624c), 30 samples
3. scanning electromicrossope (SEM), 5 samples
4. a...

Requirements:

ASTM 412a, ASTM 624c

View More


Description:

South Africa Geotechnical Laboratory needed for UCS testing , Indirect Tensile Strength testing (brasilian), Direct Shear testing, Slake Durablity testing, Atterburg, Californian Bearing Ratio, Particle Size distribution.

Requirements:

Relevant standards. please keep my contact information confidential

View More


Description:

USA Preclinical Laboratory Contract Research Organziation CRO needed for n vivo study of the wound bursting strength of cured medical adhesives. The study would measure the adhesive of 60 incisions (30 for each product) and measure the strength of the adh...

Requirements:

The tissue adhesive is FDA approved and would require a BTC-2000 (SRLI Technologies) or similar measurement device. I wish to keep my contact information and company confidential.

View More


Description:

India Packaging Laboratory needed for bursting strength testing of corrugated boxes .

Requirements:

Testing Requirement Dont Know, Contact Information & company To Remain Confidential

View More


Description:

Physical Laboratory needed for ISO 8256 Tensile impact strength testing of notched specimens at +23ºC

Requirements:

ISO 8256

View More


Description:

Europe ISO Preclincial Laboratory CRO needed for ISO biocompatibility and catheter testing- Cytotoxicity test (according to EN ISO 10993-5)
-Test for sensitization (according to EN ISO 10993-10)
-Tests for irritation (according to EN ISO 10993-10)
-Acu...

Requirements:

ISO 10993-3ISO 10993-5ISO 10993-10ISO 10993-11EN 1616EN 13868

View More


Description:

Indiana or Illinois Physical / Mechanical Laboratory needed for tensile testing, 54 samples. Average peak strength = 10 lbs

View More


Description:

Southern California Geology laboratory needed for ASTM geochemical testing: rock core tests including point load, modulus of elasticity, slake durability, unconfined compressive strength

Requirements:

ASTM

View More


Description:

Orange county or Los Angeles Materials Laboratory needed for ASTM Testing: Dielectric Strength Test for Shrink Tubing Need to see if the Shrink tubing (Kynar or M23053/8) meets the 800 Volt Dielelctric Strength test requirements.
Per Electrical:
Dielec...

Requirements:

Electrical: Dielectric strength (volts/mil) Volume resistivity (ohm-cm) ASTM D876 ASTM D876 800 min. 1.0 X 1013 min.

View More


Description:

USA Materials Laboratory needed to perform a strength test of a plastic structure that will be buried under a thin layer of concrete in a concrete floor.

View More


Description:

California Mechanical Laboratory needed for AASHTO Testing, H-30 load testing of cast iron and ductile iron manhole frames, grates and covers.
Tensile strength testing on test bars.

Requirements:

AASHTO Designation: M 306-07

View More


Description:

India Electrical Laboratory needed for periodical testing for dielectric strength of electrical gloves

View More


Description:

Mumbai India ASTM Packaging Laboratory needed for testing:
1. Density ASTM D7922
2. Ash content
3. MFI (230deg /2.I 6kg) ASTM D1238
4. Moisture KARL-FISHER
5. Izod impact ASTM D256A
6. Tensile Strength ASTM D638
7. Flexural Modulus ASTM D790 ...

Requirements:

ASTM

View More


Description:

North America Mechanical Laboratory needed for UL Testing Impact Strength (D5628) and Thermal Cycling Withstand Test(C37.55 2002 A5.1) on samples of copper bus coated with Hysol Dexter epoxy coating and DuPont epoxy coating.

Requirements:

UL Third Party Lab Impact Strength (D5628) and Thermal Cycling Withstand (C37.55 2002 A5.1)

View More


Description:

ISO Analytical Chemistry Laboratory needed for % Alcohol testing of a rum (alcohol based) sample. This entails % real strength analysis and/or % apparent strength analysis via hydrometer and/or electronic densimetry using a DMA.

Requirements:

ISO 17025 ACCREDITATION.

View More


Description:

USA Materials Laboratory needed for testing concrete material for water permeability, compressive strength, freezing & thawing, etc. as per CRD C48-73 - Making a concrete with our product for waterproofing concrete.

Requirements:

U.S. Army Corps of Engineers CRD C48-73 - Permeability of Concrete ASTM C 267 - Chemical Resistance of Mortars, Grouts and Monolithic Surfacings ASTM C 672 - Standard Test Method for Scaling Resistance to Concrete Surfaces Exposed to De-icing Chemicals AS...

View More


Description:

Mechanical Laboratory needed for Mechanical properties testing - Mechanical resistance, young/Elastic modules,Tensile strength, Compressive strength and Poisson ratio of solar pattern glass.

View More


Description:

Electrical/Mechanical Laboratory needed for dielectric constant and strength testing. Sample Configurations (1 sample of each tubing type):
1) Silicone Tubing (MED-4750) .059" x .081"
2) Silicone Tubing (MED-4755) .059" x .081"
3) Silicone Tubing '...

View More


Description:

ASTM Electrical Laboratory needed to measure the following electrical properties in HDPE: 1. Dielectric constant and dissipation factor (@ 1 Hz), according to ASTM D 1531 2. DC Volume Resistivity (@ 23°C), according to ASTM D 257 3. Dielectric Strength in...

View More


Description:

BRAZIL MECHANICAL LABORATORY NEEDED FOR TESTING "ELASTOSYL R401/40 CONTROL 33932HO" FOR TENSILE STRENGTH.

Requirements:

UNSURE - ASTM D2000 M GE 603?

View More


Description:

USA, Asia, Europe Consumer Products Safety Laboratory needed for performance tests to residential A/V furniture Stability, Strength, Tip Over, Mechanical Performance, and Tempered Glass. Furniture that will be used with TV and A/V equipment.

View More


Description:

Northeast US ISO, FDA GLP Mechanical Laboratory needed for ASTM Testing, mechanical testing of UHMWPE Fibers, incl.density, tensile strength, tensile modulus and elongation at break.

Requirements:

ISO, GLP, ASTM

View More


Description:

Canada FDA GMP Bioanalytical Laboratory needed for GMP release testing for Citalopram Tablets, 20mg & 40mg dosage strengths. Possibly to include more products in the future.

Requirements:

GMP and FDA. Contact information to remain confidential.

View More


Description:

Europe Biomechanical Laboratory needed for ASTM Testing of newly developed Supro Glue (adhesive liquid used for wound closure after the operations)for Cytotoxicity - Sensitization - Irritation - Systematic Toxicity - Subacute and Subchronic Toxicity - Gen...

Requirements:

ASTM

View More


Description:

Europe Biomechanical Laboratory needed for ASTM Testing of surgical adhesive

1- F2255-05: Standard test method for

strength properties of tissue adhesives

in lap-shear by tension loading





...

Requirements:

ASTM

View More


Description:

UK BS Textiles Laboratory needed for testing as per BS 5853 Flammability : cigarette & match - full Physical test for general domestic use: Martindale, Tear Strength, Tensile strength, Seam slippage, pilling, colour fastness to light, to rubbing and to wa...

Requirements:

CHICAGO shipped with UPS N° 1Z 949 5V5 04 69919429

View More


Description:

IEC Electrical Laboratory needed for testing as follows:
1. Test for electrical strength of insulating rubber mat (thickness3mm),up to 50,000V according to IEC 60234-1 PART 1-tests at power frequencies up to 50,000 V.
2. Any test that you can offer for...

View More


Description:

EN Materials/Mechanical Laboratory needed for testing TERRACOTTA Tiles for soluble salts, absence of blooming component, frost resistance, tensile bending strength, and color preserver in accordance to European Standard specification .

View More


Description:

USA NELAC Analytical Chemistry Laboratory needed for regular testing of Hydrofluosilicic Acid samples(a.k.a. HFS) for strength as HFS, arsenic, Fluoride content, heavy metals as Pb and color index.

Requirements:

NELAC certified or some similar accredition of the laboratory

View More


Description:

Europe FDA Laboratory needed for physical testing on ureteral stents, before use and after immersed in artificial urine for 1 month: flow rate, strength retention test, break strength and elongation test and flexibility

Requirements:

FDA

View More


Description:

Guinea Liberia Geotechnical Laboratory needed for testing typically CBR, compaction, shear strength, borrow materials testing

Requirements:

Recognised international accreditation

View More


Description:

UK BS MATERIALS LABORATORY NEEDED FOR BS 5853 FLAMMABILITY TESTING: CIGARETTE & MATCH + FULL PHYSICAL TEST FOR GENERAL DOMESTIC USE
This on the quality HELLAS & TAILIN

Requirements:

- BS 5853 FLAMMABILITY : cigarette & match - full Phiscal test for general domestic use: Martindale, Tear Strength, Tensil strength, Seam slippage, pilling, colour fastness to light, to rubbing and to water

View More


Description:

India ASTM/DIN Materials/Mechanical Laboratory needed for plastic material identification testing, filler contents, Density, tensile strength, Elongation, Melt Index, ShoreD hardness, ash content, recycled material content, flexural compressive strength.

Requirements:

ASTM , DIN

View More


Description:

Poland Automotive Products Manufacturer needs Europe Mechanical Laboratory for testing as per STD 423-0036 "Impact strength, falling-weight method"

View More


Description:

Mechanical Laboratory needed for testing a dermal scaffold used for wound repair. One requirement is the ability to hold a suture when used for abdominal repair or other stressful uses. In addition, if possible, we would like to test the tensile strength ...

View More


Description:

UK USP Physical Laboratory needed for testing qualities: FARO & DUBLIN: Fr + full physical test report
on quality: SNAKE: (1)colourfastness to light (2) breaking strength (3) colour fastness to water

Requirements:

See all explained above left with UPS 6/10

View More


Description:

Toronto Canada Mechanical Laboratory needed for testing broken Shaft adapter, probably due to rotational bending fatigue. 3-4 samples available, one failed, 2-3 control samples; samples look like different thermal treatment was performed; steel was quoted...

View More


Description:

UAE Mineral Water PET Bottling Plant and Preform Factory needs Packaging Laboratory to test the strength of the bottle and also to identify how many boxes can be loaded on trucks.

View More


Description:

Geotechnical Laboratory needed for testing unconfined compressive strength.

View More


Description:

UK Materials Laboratory needed for the following testing:
(1) Cigarette & Match
(2) Full Physical test
on 3 qualities: Chicago, Tenerife & Rockford

Requirements:

(1) Cigarette & Match test (2) Full Physical test : Martindale, Seam slippage, Tensile strength, colour fastness to ligth, Colour Fastness to rubbing, Colour fastness to water, Pilling

View More


Description:

Textiles/Materials Laboratory needed to do the following testing on an urgent basis:
1. Thread count method 5050
Warp ground yarns per inch, Warp pile yarns per inch, fill yarns per inch

2. Breaking Strength Method 5100
Warp LB, Fill LB
...

View More


Description:

Acoustics/Mechanical Laboratory needed for testing noise absorption and mechanical strength to ZTV-88 or BS EN-1794, highways noise barrier.

Requirements:

German ZTV-88, or BS EN-1794

View More


Description:

WestCoast USA Mechanical Laboratory needed for the following testing according to ANSI A14.2:
Compression Test >1400/lbs
Bending Test >1400/lbs
Shear strength Test >1400/lbs
Stability Test

Requirements:

Test Procedure per ANSI A14.2, Ladders-Portable Metal-Safety,type 1A

View More


Description:

Asia ISO Packaging Laboratory needed for ASTM Packaging Stability Testing with
1.Metallurgical analysis
a. cross section and SEM to check icrostructure
b. micro hardness
2. Chemical composition analysis by
a. elemental profiling by XRF
b. followed ...

Requirements:

1.package shelf life testing by ASTM F1980 with evaluation through package seal strength test (ASTM F88) and package integrity (leak test, ASTM F1929) and sterility test (ISO 11137) 2. fatigue testing of dental implants to ISo 14801 3. All labs must have ...

View More


Description:

ISO/IEC Laboratory needed for testing of plastic electronic identification cards, e.g., ATM cards, Credit Cards, etc in accordance to IEC 7810. The critical parameter to be tested is the Peel Strength of the Magnetic Band.

Requirements:

ISO/IEC 7810

View More


Description:

UKAS Materials Laboratory needed to test plastic fibers made up of HDPE,LLDPE with UV stabilizers and master match chemicals added for color choices. Need to conduct test for clarity on following factors: 1.Color fastness (UV stablisers) 2.Tear-Strength o...

Requirements:

UKAS

View More


Description:

UK Mechanical Laboratory needed for prototyping and biomechanical strength testing of a medical device.

View More


Description:

UK BS MATERIALS LABORATORY NEEDED FOR BS 5853 FLAMMABILITY: CIGARETTE & MATCH + FULL PHYSICAL TEST FOR GENERAL DOMESTIC USE AS FOLLOWS:

MARTIN DALE ISO 12947-2
SEAM SLIPPAGE EN ISO 13936-2
TEAR STRENGHT EN ISO 13937-3
TENSILE STRENGHT ISO ...

Requirements:

- BS 5853 FLAMMABILITY : cigarette & match - full Phiscal test for general domestic use: Martindale, Tear Strength, Tensil strength, Seam slippage, pilling, colour fastness to light, to rubbing and to water

View More


Description:

Oregon ASTM Analytical Chemistry Laboratory needed to test dielectric strength of transformer oil in accordance to ASTM D 149-97a

Requirements:

ASTM D 149-97a

View More


Description:

Electrical laboratory needed for ASTM testing: Dielectric Constant, Dissipation @ 1GHz and 10GHz,Dielectric Strength, Vol/Surface Resistivity.

Requirements:

IEC 60250, 10GHz

View More


Description:

USA Electrical Laboratory needed for testing in accordance to CCC.
1.Marking and instructions
2.Electric construction
3.Earth leakage current
4.Electric strength
5.Ground resistance
6.Dimension of plug of direct plug-in AC power adapter
7.Disturba...

Requirements:

CCC (IMPLEMENTATION RULES FOR COMPULSORY CERTIFICATION OF ELECTRICAL AND ELECTRONIC PRODUCTS Information Technology Equipments) Appendix 4 Test Requirements in Factory Quality Control for Compulsory Product Certification of IT Products

View More


Description:

Acoustics Laboratory needed for acoustics testing of different stethoscopes (10 of each) tested for Acoustic Pick Up.

Below is a basic list of items we would like the testing to cover.

1. How well the sound pick up works on both sides of the chestpi...

Requirements:

Please keep contact and company information confidential.

View More


Description:

Asia ASTM Laboratory needed for UV Degradation test for Geotextile as per ASTM D 4355
Mullen Burst strength ASTM D 3786
Apparent Opening Size ASTM D 4751
Permeability ASTM D 4491

Requirements:

ASTM standards

View More


Description:

USA Mechanical Laboratory needed for mechanical testing of non-functioning twirling rifles to determine the strength respective to each other.

View More


Description:

SW Arizona Geotechnical Laboratory required for testing:
*unconfined compression-rock ASTM D 2938
*unconsolidated-undrained triaxial compression ASTM D 2850
*point load strength index of rock ASTM D5731
*one dimensional swell or settlement potential o...

Requirements:

PRICE QUOTE ONLY ASTM - see above contact info & company confidential

View More


Description:

Algeria ASTM/ISO Metallurgical Laboratory required to test a carbon steel metal to determine the grade and the contents plus its strength

Requirements:

ASTM + ISO

View More


Description:

Singapore Mechanical Laboratory required for Three-point bending test to measure flexural strength, flexural yield strength and flexural modulus.

Requirements:

Samples:Ti samples, 50mmX10mmX3mmAlN samples, 50mmX10mmX5mm

View More


Description:

Physical Laboratory needed for EN Packaging Testing to RCV Top Load Strength 1. RCV Top Load Strength_450da N MINI _NFH 13 0012. COBB/Water Absorption_1800s/300s/150g maxi_NF EN 20 535
2. COBB/Water Absorption

View More


Description:

Ireland UKAS physical laboratory needed for u-value testing and strength testing

Requirements:

ukas. confidential

View More


Description:

Middle East mechanical laboratory needed for mechanical properties testing for set oilwell cement (special blend that we supply) like Youngls Modulous, PR, tensile strength etc.

View More


Description:

US materials laboratory needed for ASTM property testing standard / method typical values evaluation of microstructure and distribution of silicon in BC Matrix SEM
Density ASTM- C20 ASTM- C135 2.5 -2.6 g/cc
Hardness KNOOP 1Kg KNOOP 2Kg 24-28 G...

Requirements:

ASTM.

View More


Description:

US ASTM laboratory to conduct mechanical testing of properties as well as ballistic testing of Reaction Bonded Boron carbide panels for Flexural Strength,Fracture Toughness,Microhardness,CTE,Elastic Modulus,
All as per ASTM standard only.

Requirements:

ASTM

View More


Description:

Laboratory to conduct Bursting Strength Test using PSI as standard.

View More


Description:

ASTM laboratory to conduct the following test on boron carbide made by requester. Property Testing Standard / Method Typical Values Evaluation of Microstructure and Distribution of Silicon in BC Matrix SEM Density ASTM- C20 ASTM- C135 2.5 -2.6 g/cc Hardne...

View More


Description:

Laboratory needed to conduct tests for a nutraceutical company involving compression studies done on some of requester's beadlets. We have a client that would like to find out the strength of the beadlets so that they know that before putting them into a ...

View More


Description:

Laboratory to test the following:
Neoprene Rubber Disc Of size 435*395*29mm Test Required 1) Polymer 2) Polymer Content 3) Shore Hardness 4) Tensile Strength 5) Elongation at Break 6) Compression Set ( 24 Hrs at 100 degree C) 7) Change in properties afte...

View More


Description:

Europe EN NORM laboratory to test strength, density, abrasion, fire classification and environmental tests on GRC and GRP product samples.

Requirements:

EN NORM.

View More


Description:

Santo Domingo analytical chemistry laboratory needed for BP analysis for finished pharmaceutical product testing to prove its strength,

Requirements:

BP

View More


Description:

USA Food analytical chemistry laboratory needed for compendial Gelatin Bloom Strength Testing to compendial or accredited test method.

Requirements:

Prefer the use of a compendial or accredited test method (such as ASTM or AOAC)

View More


Description:

USA Agricultural laboratory needed for EPA testing grain bait to complete our re-registration process with EPA. Consequently, we are looking for a reliable, professional, and efficient company which can perform the required tests. So far it looks like we...

View More


Description:

Asia Physical Laboratory needed for testing of Density,Water Basorbtion,Tensile Strength and elongation at breaking,tear strength,Deflection Temparature of Plastiscs under Flexural Load,Comppressive strength,Melt Flow Index,Melting Point(Tm),Thermal Condu...

Requirements:

ASTM

View More


Description:

Textiles Laboratory needed for 100 wash industrial laundry testing on flame resistant garments. Chemcials and wash process provided. Garments will be tested for shrinkage, color change, and tensile strength at specified intervals through 100 washes.

View More


Description:

Very large company needs USA mechanical laboratory for ASTM materials testing, fracture strength and toughness according to ASTM 1161-94

View More


Description:

Physical Laboratory needed for bolt testing up to 48mm - assembly (bolt,nut and washer strength).

View More


Description:

India Physical Laboratory needed for welding strength testing to check CO2 WELDING.

View More


Description:

USA Packaging Laboratory needed for physical properties Testing of paper shopping bags: materials, burst strength tests, folding endurance, tear strengths, colorfastness tests (dry and wet), workmanship quality test, toxics testing.

Requirements:

Please keep contact information confidential.

View More


Description:

India Physical Laboratory needed for NFC 33020 routine testing of insulation piercing connectors as per NFC 33020 standards. Mechanical tensile strength, electrical current carrying capacity, enviornmental testing (corrosion/water immersion test etc).

Requirements:

NFC 33020. Confidential

View More


Description:

Asia IEC Physical Laboratory needed for testing a cast resin medium voltage insulator for Hv Frequency, Wet & Dry. Testing for impulse and power frequency and tensile strength.

Requirements:

According to IEC satandard

View More


Description:

China Analytical Laboratory needed for EN 1563 mechanical testing such as brinell hardness, tensile, yield strength, elongation, chary values, and microstructure. Testing ductile iron for the wind energy for ductile grade 400-18U-LT.

Requirements:

EN 1563 keep this confidential

View More


Description:

Physical Laboratory needed for ASTM Testing of fabric, ASTM D3776, Tear Strength ( lbs W x F) - ASTM D1424, Tensile Strength ( lbs W x F ) - ASTM D5034, Laundry Shrinkage ( W x F) - ASTM 1506, Vertical Flame - ASTM D6413, Thermal Manikin - ASTM F1930 ...

View More


Description:

India Physical Laboratory needed for metallurgical testing: grain structure , elongation, tensile strength, hardness , resistance of copper strip

Requirements:

confidential

View More


Description:

Materials Laboratory required to test a swatch of 2.6mm black rubber midsole for the following:
1) Oil Swell (%) 48 hours @ RT ASTM D 471-98 A)IRM 903 Oil B)Fuel B
2) Tear Strength (kgf/cm) ASTM D 624-00 B.

View More


Description:

UK BS EN ISO MATERIALS/TEXTILES LABORATORY REQUIRED FOR (BS EN ISO 12947: 1999 part 2 - MARTINDALE ABRASION (2) BS EN ISO 13937-3: 2000 - TEAR STRENGTH (3) BS EN ISO 13934-1: 1999 - TENSILE STRENGTH (4) BS EN ISO 13936-2: 2004 - SEAM SLIPPAGE (5) BS EN IS...

Requirements:

(1) BS EN ISO 12947: 1999 part 2 - MARTINDALE ABRASION (2) BS EN ISO 13937-3: 2000 - TEAR STRENGTH (3) BS EN ISO 13934-1: 1999 - TENSILE STRENGTH (4) BS EN ISO 13936-2: 2004 - SEAM SLIPPAGE (5) BS EN ISO 12945 : 2000 - PILLING (6) BS EN ISO 105-B02 : 1999...

View More


Description:

India Materials Laboratory needed to conduct tests for enhancing the strength of historic wood used in ancient buildings by applying wood preservatives

Requirements:

confidential

View More


Description:

Asia, India ASTM F2079 Mechanical Laboratory needed for Radial strength and recoil of cardiac stent

Requirements:

ASTM F2079

View More


Description:

Materials Laboratory needed to test Surface Emittance No CEN Norm Flame Spread NF EN 13501-1 Smoke Developed NF EN 13501-1 Water Vapor Transmission NF EN 12086/ NF EN 1931 Temperature/ Humidity Resistance Bleeding and Delamination NF EN ISO 11339 Pliabili...

View More


Description:

USA Product Safety Laboratory needed for testing a baby wrap/carrier for strength.
There should be no chance of fabric failure causing a child to fall.

Requirements:

I really don't know what these mean.

View More


Description:

USA GM9129P MECHANICAL LABORATORY NEEDED FABRIC STRENGTH TEST - TEST FOR SLIPPAGE (PULLOUT) AND ELONGATION OF NEEDLE HOLES AFTER SEWING FABRIC TOGETHER

Requirements:

AUTOMOTIVE SPECIFICATION GM9129P (SEAM STRENGTH)

View More


Description:

Asia - Thailand Analytical Chemistry, Materials/Mechanical Laboratory required for the following tests:

3.5.1 Density, Core ISO 845/ASTM D 3574, Test A
3.5.5 Heat Aging ISO 2440/ASTM D 3574, Test K,22 h at 140 +/- 2 °C
"3.5.5.1 Compression Deflection...

Requirements:

ASTM/ISO Pls keep our information remain confidential

View More


Description:

USA or Canada Physical/Packaging Laboratory required for Oxygen Transmission Rate; Moisture Vapor; Transmission Rate; and Tensile Strength.

Requirements:

Please keep the contact information confidential, only the labs we required can contact us, no advertisement please. Thanks.

View More


Description:

Southeast U.S. Mechanical Laboratory required that can strength test and certify "hand tool" products for us when the need requires. The tools reference are: hand wrenches, sockets, screwdrivers etc.

View More


Description:

Russia, St. Petursburg or Moscow Analytical Chemistry and Mechanical Laboratory needed for the following testing:
Chemical - C, Si, Mn, Cr, Ni, Cu, Su, P.
Mechanical - Tensile Strength, Relative Elongation, Impact Strength, Yield Strength etc

Requirements:

Yes I require my contact information and company to remain confidential

View More


Description:

Electrical Laboratory required for DC dielectric strength testing per ASTM D3755 on a 2 side coated PET film.

View More


Description:

Materials/Analytical Chemistry Laboratory needed for product testing. Semmes Inc has developed a process of introducing nano fibers into foam products now being marketed and achieving strength increases of 5X. The tests in the block below are required t...

Requirements:

SEMMES INCORPORATEDTest Requirements for Nano Fiber Reinforced Foam MaterialMaterial Sample Tests Required Tests Type Size per SampleRaw Polyol 100 ml 1 D4273 - Hydroxyl Content Raw Polyol 100 ml 1 D4274 - Hydroxyl N...

View More


Description:

USA and CANADA ASTM Materials/Physical Laboratory needed for Nitrile Examination glove physical property--Tensile Strength and Elongation ASTM D6319 ASTM D412 ASTM D573

Requirements:

ASTM D6319 ASTM D412 ASTM D573

View More


Description:

India ASTM Physical Laboratory needed to test Ultra high molecular weight polyethylene for: Density, Tensile strength, Yield strength, Elongation, Hardness, Ash content, Izod impact

Requirements:

ASTM

View More


Description:

Canada Materials Laboratory needed for Tearing Strength ASTM D5733-99 and Cold Crack Resistance CFFA- testing.

View More


Description:

Bangalore Metallurgical Laboratory required to do Welding Tensile strength testing on Stell of 6.5MM thickness

Requirements:

Tensile strength - 600MPA

View More


Description:

Malaysia Materials Laboratory required to test carton strength (secondary packaging).

View More


Description:

Toronto, Canada Materials Laboratory required to do tensile strength testing of a flat tape used to pull wire through a conduit. The tape has been somewhat worn from use, and we need to know what the remaining tensile strength is after such wear.

View More


Description:

USA Electrical Laboratory needed for testing Burst Pressure for vinyl/silicone tubing, Dielectric Strength for silicone tape

Requirements:

Confidential

View More


Description:

Pennsylvania Geochemistry Laboratory needed for testing rock hardness, work bond index, compressive strength

View More


Description:

Toronto Mechanical Laboratory needed for Rockwell Hardness Testing, material check, tensile and yield strength on fastener-type parts.

Requirements:

Contact information to remain Confidential.

View More


Description:

UK materials laboratory needed for physical testing of self adhesive films against various criteria, peel strength, opacity, weathering, initial & ultimate adhesion,gloss levels, temperature resistance, salt spray,flexibility etc. Can you please respond ...

View More


Description:

USA/ Canada Packaging Laboratory needed for ASTM testing Heat seal strength
Hot tack strength
cold seal strength
Coefficient of Friction (COF) o packaging materials

Requirements:

ASTM ? Not sure which standards, but need help on deciding.

View More


Description:

Eastern PA Metallurgical Laboratory needed for Chemical Analysis of grate key metal for carbon, silicon, phosphorus, sulfur, molybdenum - high silicon ductile iron with molybdenum as per A536, Grade 65-45-12.

Physical Characterisics of Stoker Key metal...

Requirements:

Brinnel HardnessA536

View More


Description:

Toronto Analytical Chemistry Laboratory needed to test silicone gel for dielectric strength and constant

Requirements:

dielectric sonstant at 100 Hz and 100 kHzDissipation factor and 100 and 100K hz.dielectric strength

View More


Description:

ISO 17025 Analytical Chemistry Laboratory for gel texture analysis test to measure the gel strength/resistance for our product.

View More


Description:

Materials Laboratory needed for SACMA SRM 8R-94material strength properties testing: Short beam shear strength of orientated fiber-resin composites.

Test specimen size is 1.125" long x 0.25" wide x 0.040" thick.

Please note that there are special re...

Requirements:

SACMA SRM 8R-94

View More


Description:

Geology laboratory needed for rock testing: Cerchar Abrasivity, Taber Abrasivity, Specific Energy, Drillability Index, Blasting Index In addition to that can you provide the following Field Testing for Insitu : 1. Rock Mass Deformation / Deformability 2. ...

View More


Description:

Toronto Physical Laboratory needed for concrete Strength Testing.

Requirements:

cas

View More


Description:

Law Firm needs eastern US analytical chemistry laboratory needed for testing the strength of Digoxin tablet.

View More


Description:

Physical Laboratory needed for ASTM Testing: ASTM D882 (Tensile strength, Elongation and Modulus of PET sheet)& ASTM D790 (Flexural Strength and modulus for PET Sheet Materials)

ASTM D256 (Impact strength for PET Sheet)

ASTM D1003 (Light Transmissio...

Requirements:

ASTM D882 ASTM D790 ASTM D256 ASTM D1003 ASTM D648A-B

View More


Description:

Engineering Company needs USA or Canada Physical Labratory for ASTM Testing SAUEREISEN LOW EXPANSION CEMENT # 29, TENSILE STRENGTH PER ASTM C 307-08

Requirements:

TENSILE STRENGTH PER ASTM C 307-08

View More


Description:

USA FDA GMP Biobechanical Laboratory needed for testing for Biomechanical properties of frozen human tissues, including tensile strength, creep tests, etc.

Requirements:

FDA

View More


Description:

Valve Manufacturer needs USA or Canada Metallurgical Laboratory for ASTM Testing for bond strength of CrC HVOF coating on 17-4 ph and 410 SS substrate.

Requirements:

ASTM C633-01

View More


Description:

Canada ASTM Mechanical Laboratory needed for testing tensile strength of morter(made with sand and latex paint)- ASTM C 307-03.

Requirements:

ASTM C 307-03

View More


Description:

USA FDA GMP Analytical Chemistry Laboratory needed for Particulate Friability Testing for crush strength of an amorphous silica gel around 62 microns in average particle diameter.

Requirements:

No jet cup testing

View More


Description:

Indiana USA Physical Laboratory required for some testing. Below are the material and the tests required:

.25mm thick polyester sheets:
- i'm interested in a stress v. strain curve (elongation)
- coefficient of friction for the material

acrylic ...

View More


Description:

Germany DIN Geological Laboratory required for Classification and Strength of Geotechnical Soils.

Requirements:

DIN

View More


Description:

USA Materials Laboratory needed to perform the following tests on surgical masks: Acid or Alkali, Fluorescent light, Ash Content, Formaldehyde test, coloring agent, intensity strength of mask

View More


Description:

California Rheology Laboratory needed for study - Plot of Viscosity v/s shear strength.



View More


Description:

Toronto ASTM F1980 Medical Device Testing Laboratory needed to perform as per - ASTM F1980 without testing the sterility clauses - Aging & Shelf Like packaging testing - Transportation/Distribution SImulation - Package Integrity Testing - Package Strength...

View More


Description:

Arkansas (or near) FDA, GMP, GLP Bioanalytical/Nutritional Laboratory needed for raw material and end product testing for purity, strength, and composition of dietary supplements and for limits on specific contaminants including microbial analysis, and me...

Requirements:

FDA, GMP,GLP

View More


Description:

India ASTM Materials Testing Laboratory needed for:
Plastics Discoloration Testing
Physical Properties Testing
Simulated Environmental Exposures Testing Studies
Heat Deflection Testing
Mechanical Properties Testing
Peel Strength Testing
Flexure Mod...

Requirements:

ASTM standard

View More


Description:

USA Analytical Laboratory needed for testing Activated Alumina products. SPX dehydration & Filtration is a manufacturer of compressed air & gas drying equipment. We are going through a round of vendor qualification tests for activated alumina products a...

View More


Description:

India Physical Testing Laboratory needed for
Materials Screeds Testing: Compressive strength, Residual Humidity,
Waterproofing: Elasticity, Adhesion to substrate
Adhesives: Shear Strength, Tensile Strength, Adhesion / bond & compatibility with above ...

Requirements:

all

View More


Description:

TN (USA) Electrical Testing Laboratory needed for dielectric strength and dielectric withstand testing on ceramic electrodes for use in our gas water heating products.

View More


Description:

Eastern USA Geotechnical Laboratory needed for Grain Size Testing, Soil Mechanics characterization, Compressibility Testing, Total Shear Strength Testing, Effective Shear Strength Testing, Consolidation Testing, and other basic geotechnical lab analysis.

Requirements:

N/A

View More


Description:

UK ISO 13356:2008 Materials laboratory needed for accelerated aging & strength testing of yttria-stabilized tetragonal zirconia (Y-TZP).

Requirements:

ISO 13356:2008

View More


Description:

Analytical Chemistry Laboratory needed for potency strength and accuracy of oxycodone compounded capsules

Requirements:

potency strength and accuracy

View More


Description:

US Matericals Laboratory needed for AASHTO testing of cured out urethane for Hardness, Elongation, Vacuum, Tensil Strength, Adhesive Strength, Tear Resistance, and Weatherability

Requirements:

AASHTO

View More


Description:

India textiles laboratory needed for testing biodegardable fabric with the following properties : * High tensile strength ( about 7000psi or 48.2 MPa) * High flexibility ( about 1-2 GPa ) * Biodegradable ( preferably 100% ) * Cheap
* Water,air-proofness ...

View More


Description:

USA Clinical Laboratory needed for Testing hair care product to see the effects on scalp, hair growth and hair strength.

Requirements:

Company confidential

View More


Description:

China ISO certified geotechnical laboratory forvarious ASTM geotechnical testing on the rock and coal samples.



Tests include brazilian, shear strength to determine cohesion and friction angle, slake durability, triaxial compression, uniaxial comp...

Requirements:

ASTM, ISO

View More


Description:

Materials Laboratory needed for PCB material test, such as Peel strength, tensile strength ets.

View More


Description:

Malaysia Analytical Chemistry Laboratory needed for Transformer Oil Testing for:
1) Acidity
2) Interfacial Tension
3) Dielectric Strength
4) Dissolved Gas
5) Moisture

Requirements:

Microbiology,Oil

View More


Description:

Bioanalytical laboratory needed for measuring tensile strength of hair samples

Requirements:

Keep my details confidential

View More


Description:

Indi Clinical Laboratory needed for measurement of hair strength (preferable, as tensile strength) to evaluate the performance of our hair care products to substantiate claims.

Requirements:

Kindly keep my details CONFIDENTIAL

View More


Description:

India materials laboratory needed for physical testing tear strength of polyester lamianted film and pouches.

View More


Description:

ISO West Africa materials laboratory needed for ASTM Testing for tensile strength,relative density,specific gravity,thermal resistance,colour and corrossion resistance tests [properties] of longspan aluminum roofing materils.

Requirements:

test to conform with ASTM & ISO standards.

View More


Description:

Analytical Chemistry Laboratory needed for testing for presence of formaldehyde in a nail strengthner

View More


Description:

India/Singapore Medical Device lab needed for:
Size
Form Factor / Finish
Weight
Appearance
Labels
Pack seal strength
Pack seal integrity
Adhesive lamination
Tape integrity
Hydrogel adhesion
Cover peel strength
Static load
Flex
Adhesive stren...

Requirements:

ASTM, IEC, ISO

View More


Description:

Mechanical laboratory needed for Minimum tensile strength, Minimum shear strength

Minimum torsional strength

Pull out value for different thickness of purlins

Pull over value for profile sheets of different thickness.

View More


Description:

Materials laboratory needed for analysis: EN 12192-1 Products And Systems For The Protection And Repair Of Concrete Structures - Granulometry Analysis - Part 1: Test Method For Dry Components Of Premixed Mortar EN 1767 Products and systems for the protect...

View More


Description:

West Coast, USA Physical Laboratory needed for testing two 14mm combination wrenches we would like tested to determine the materials Ultimate and Yield Tensile Strength. One wrench is Crome Vanadium and one is Ti 6AL-V4 ELI.

Requirements:

Please keep our contact information and company information Confidential. We will contact the suppliers directly.

View More


Description:

Geophysical Laboratory needed for Masonry and Concrete Masonry Unit Testing Masonry Brick: ASTM C67 tests (compressive strength, absorption, freeze-thaw, and length change)
Concrete Masonry Units: compressive strength (ASTM C140), linear drying shrinkage...

Requirements:

Confidential

View More


Description:

Medical devices Manufacturere needs ASTM physical strength testing of interference screws and anchors according ASTM STD .

Requirements:

FOr interference scres and anchors: Fluence, la torque/torsion resistance and break angle due to torsión Anexo I ASTM F 543-07Insertion screw Anex A 2ASTM F 543-07Pull ouy strenght Anex A3 ASTM F 543-07Flexion essaysFor staples:Anex A 3 ASTM F 564-02anex...

View More


Description:

USA Materials Lab needed for ASTM Testing for Compresssive Strength of Lightweight Insulating Concrete/ASTM C 495.

Requirements:

ASTM C 495

View More


Description:

Southern California Metallurgical Laboratory needed for strength testing a Metal component which houses soldered ferrite components inside . We need to check the solder joint strength to 4000g.

View More


Description:

Pakistan ISO 17025 Textiles Laboratory needed for Color Fastness Testing to washing and laundering
(ISO 1O5 CO1: 1989)
Color Fastness to washing and laundering
(ISO 1O5 CO2: 1989)
Color Fastness to washing and laundering
(ISO 1O5 CO3: 1989)
Color Fa...

Requirements:

We need to take particiapation in PT of above mentioned tests. ISO-17025.

View More


Description:

Europe Electrical lab needed for electrical testing for ceramic material (on samples):
- withstand voltage,
- electric strength,
- volume resistivity
According to DIN EN 606072 ceramics standards

View More


Description:

USA lab with D149 and D150 capabilities needed to test for:
Dielectric constant
Dielectric strength
(two PVC samples. we will provide the plaques)

Requirements:

D149 and D150

View More


Description:

USA Safety and performance lab needed for testing of infant clothing

*16 CFR 1610 - Standard for the Flammability of Clothing Textiles

*attachment strength testing (tension test)

View More


Description:

ASTM certified USA lab needed to test my product. Is 13'x7'x4", is a HDPE composite, and comes in 2 versions-one mechamnically assembled, one hot plate welded; I need to know bending strength, torsion, life expectancy, one version of product compared to t...

Requirements:

ASTM where applicable, many tests/experiemnts may be custom

View More


Description:

USA Analytical Chemistry lab needed to test agrichemical products, as well as research & development. We are in need of a lab who can help us test various chemical compositions against a known compound to determine strength of reactions. Composition will...

View More


Description:

USA (pref. New England) ASTM certified product safety lab needed for safety testing of infant toys: lead/toxic chemical content, strength, etc.

Requirements:

CONFIDENTIAL

View More


Description:

USA lab with physical capabilities needed for quotes on each of the following tests: abrasion resistance per EST-329A, Heat aging in a convection oven at 275C for 100 hours, flame resistance per EST-439, fluid exposure per EST-911, dielectric strength per...

View More


Description:

American lab to test construction of solid bamboo flooring, tongue & grooved planks. Looking for the following testing:
Hardness ASTM D 1037 Janka Ball
Dimensional stability ASTM D 1037
Flammability: ASTM E 648
Smoke density: ASTM E 622
Compressive...

Requirements:

ASTM

View More


Description:

North america, analytical chemistry lab needed for testing. cationic surfactants in raw (high strength) wastewater.

Requirements:

None

View More


Description:

East Coast US Analytical Chemistry Lab needed for Organic Chemical Testing of Hair Dye Raw Materials, General Assay, Strength and MetalsHPLC, UV/VIS, GCMS and metals, ROI, MP, LOD

View More


Description:

Analytical Chemistry Lab needed for deformulation of a vaginal gel primary ingrediant aloe barbadensis;
determine % , strength of aloe ingrediant

View More


Description:

Mechanical /Physical Lab needed for ANSI Product Safety Testing to CE Standards of dynamic and static strength of Full body Harness and other fall arrest systems and sub componenets as per EN and ANSI standards

Requirements:

ANSI and CE standards

View More


Description:

Product Safety laboratory needed for UL/CE certification testing of Personal Protection Equipment EN-12275 Connectors/UIAA-121
1. strength in main direction
2. strenght in transverse direction
3. gate open strenght

We need to know the strength tes...

Requirements:

UL certified/CE certified

View More


Description:

Mechanical Laboratory needed for ASTM compressive strength testing of concrete cylinder or block.

Requirements:

ASTM C 39/CSA A23.2-9C

View More


Description:

Metallurgical lab needed to test the grade and strength of a steel sample

Requirements:

Standard test to determin the grade of steel and strength

View More


Description:

Textile laboratory needed to study the break strength and tensile strength of cotton sheeting

View More


Description:

Textiles laboratory needed for testing to determine pick up of sized yarn, elongation and tensile strength of sized yarn

Requirements:

confidential

View More


Description:

Biophysical laboratory capable of performing aging studies and tensile tests on woven collagen dressings needed. We are performing aging tests on samples of the dressings medical devices, and we wish to determine how long term elevated storage temperatu...

Requirements:

None.All contact info and company name is to remain confidential

View More


Description:

Manufacturer of masonary stone products needs physical lab ASTM tests for thermal resistance, compressive strength, flame spread, etc..

Requirements:

ASTM C177, C518, C67, C567, C39, C192, C482, C39, E662

View More


Description:

Biochemistry laboratory needed for testing of grip strength in MDX mouse strain for developing a treatment for muscular dystrophy

View More


Description:

MATERIALS ANALYTICAL CHEMISTRY LABORATORY NEEDED TO TEST POLYISOCYANURATE AND POLY URETHANE BLOCK.
TEST DESCRIPTION: MEASUREMENT OF
DENSITY ,THERMAL CONDUCTIVITY,COMPRESSIVE STRENGTH AND WATER VAPOR TRANSMISSION

Requirements:

ASTM

View More


Description:

Physical laboratory needed to test strength of cloth; ball bursting method

Requirements:

FED STD 191A METHOD 5120:1978

View More


Description:

Textile laboratory needed for Fabric Breaking Strength Testing. Test the strength of biodegradable PGA Biofelts.

Requirements:

ASTM

View More


Description:

FDA Biophysical laboratory needed for ISO tensile strength testing of tissue (tendons

Requirements:

FDA, ISO

View More


Description:

Physical laboratory URGENTLY needed for ASTM testing the following materials:

3no. 350mm x 450mm x 69mm

3no. 200mm x 300mm x 52mm

3no. 200mm x 400mm x 63mm

Tests required are:

The tests are indicated in table 18.4.5.1 of Division II of AASH...

Requirements:

ASTM

View More