Most Recent industrial Laboratory Test Requests

Contract Laboratory has received the following industrial Laboratory Test Requests which need to be fulfilled! These industrial Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their industrial Laboratory Test and Scientific Research. If you need a industrial Laboratory, please Submit a industrial Laboratory Test Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Test Requests Service Requests Product Requests Business Request

Title:

Industrial Waste Ecotoxicity Studies

Description:

Environmental Toxicology needed for ecotoxicity studies of industrial waste as well as the composition of dangerous, hazardous substances in waste.including 1. Methyl acrylate, Cas No .: 96-33-32. Methyl methacrylates, Cas No .: 80-62-63. n-octylmercapta,...

View More


Title:

Heavy Metals Analysis

Description:

Company needs forensics laboratory for industrial hygiene investigation for heavy metals in a specific garment and respirator filter f

Requirements:

broad range of heavy metals

View More


Title:

Stress Relief Testing

Description:

Large Industrial Company needs Physical Laboratory for stress relief testing not exceeding 4% per 1000h at initial force making 70% of maximum force corresponding to ultimate tensile strength.

View More


Title:

Contaminate Failure Analysis

Description:

URGENT Large Corporation needs Industrial Forensics Laboratory for failure analysis and identification of contaminate affecting composites part quality.

Requirements:

Please quote price and time it takes to analysis it.

View More


Title:

Adhesive Stability Studies

Description:

Industrial Laboratory needed for Stability Studies on adhesive to determine the shelf life on three levels:preservative stability, adhesive bond stability, viscosity stablility

View More


Title:

Industrial Biocide Challenge and Leaching Studies

Description:

LONG-TERM TESTING Microbiology Laboratory needed for industrial biocides challenge and dry film tests (with and without leaching)

Requirements:

^ IMPORTANT Please provide quote.

View More


Title:

Failure Analysis of Automotive Part

Description:

Industrial Forensics Laboratory needed for failure analysis testing on automotive part for water contamination. Water is getting past the seals in the connector and is being wicked down the wires and corotating the ECU connector. We have tested the wickin...

View More


Title:

Varnish / Lacquer Identification

Description:

Industrial Laboratory needed for determining the amount and kind of varnish / lacquer in a couple of wood products analyze to know exactly what kind of varnish/lacquer was used.

Requirements:

Please provide cost.Confidential

View More


Title:

Gas Analysis / ASTM Hydrocarbons

Description:

Industrial Laboratory familiar with ASTM and ISO standards for measuring hydrocarbon samples needed for gas analysis to the API 617 datasheet which offers the standard composition format against which all centrifugal OEMs: As a reference, the template for...

Requirements:

We want a lab that has intimate familiarity with the relevant ASTM and ISO standards for measuring hydrocarbon samples

View More


Title:

Grease Testing

Description:

Industrial Laboratory needed for V2F rig testing for grease

View More


Title:

Printing Materials Testing

Description:

Industrial Laboratory needed to provide quote for heavy metals testing in printing materials such as ink, paper, varnish, starch for
Cadmium (Cd)
Lead (Pb)
Mercury (Hg)
Hexavalent Chromium Cr (VI)
Polybrominated biphenyl (PBB)

Polybrominated diph...

View More


Title:

SAE Air Dryer Evaluation

Description:

Industrial Laboratory needed for TJ2384 SAE testing for 15 air dryers

Requirements:

J2384

View More


Title:

ASTM Metals Thermal Conductivity Testing

Description:

LONG-TERM TESTING Industrial Laboratory needed for thermal conductivity testing by laser flash method for metals as per standard ASTM: E1461-13. Thermal conductivity and thermal diffusivity are the most important thermophysical material parameters for cha...

View More


Title:

BIS Compliance Vibration Testing

Description:

Industrial Laboratory needed for vibration testing required as per IS 11037 Electronic type fan regulators including Clause no 9.3.13.4:
Sweep frequency range 10 to 150HZ.
No of sweep cycle 5
Displacement amplitude 0.15mm.
The direction of vibratio...

View More


Title:

Washer Fluid Boiling Range Determination

Description:

Industrial Laboratory needed for DIN testing of ethanol- and isopropyl alcohol-based washer fluids tested for boiling range according to DIN 53171 Solvents for paints and varnishes - Determination of distillation characteristics (boiling range and boiling...

Requirements:

DIN 53171

View More


Title:

Cannabis Testing

Description:

LONG-TERM TESTING Third-party Laboratory needed for analytical chemistry and microbiology testing of Industrial Hemp CBD product including: THC, Terepens, CBD, Heavy metals, pesticides, mold, VOC residual solvents, , mycotoxins, e.coli, salmonella and ba...

View More


Title:

WHO Water Testing

Description:

Food Laboratory needed for WHO Drinking water testing.

View More


Title:

Water Analysis

Description:

LONG-TERM TESTING Company needs EPA environmental laboratory for water sample testing.

View More


Title:

ASTM Metal Peel Test

Description:

Aerospace Company needs Industrial Laboratory for ASTM testing: metal to metal climbing drum peel test to ASTM D1781 Standard Test Method for Climbing Drum Peel for Adhesives

View More


Title:

Cleavage Testing of Bonded Joints

Description:

Industrial Materials Laboratory needed for ASTM Cleavage testing of composite materials to ASTM D5041, Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints. Cleavage test, at ambient condition; and at 130 Deg F and 100% Rel...

Requirements:

ASTM D5041, cleavage test, at ambient condition; and at 130 Deg F and 100% Relative Humidity

View More


Title:

Metallic Valve Testing

Description:

Industrial Laboratory needed for metallic value pressure testing to BS EN 12266-1:2012, P11(Annex A.3) and P12 (Annex A.4), Industrial valves. Testing of metallic valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements

...

View More


Title:

ASTM Abrasion Resistance

Description:

Industrial Materials Laboratory needed for ASTM Abrasion Resistance Testing to ASTM D4060-14;

Requirements:

National Accredited reports shall be issued

View More


Title:

Automotive powder coating Testing

Description:

Automotive Industrial Laboratory needed for physical testing of powder coated metal according Ford WSS-M2P190-A
Interior painted part of handbrake including
3.4.6 FLTM BN 107-01 Cure test
3.5 FLTM BN 155-01 Abrasion and paint wear resistance
3.4.9 FLT...

View More


Title:

DER/FAA Aerospace Flame Test

Description:

Large corporation needs USA Industrial Laboratory with a DER/FAA certified Flame Chamber for Vertical Flame Test per 14 CFR § 25.853(a), Appendix F, part I (a)(1)(ii)

Requirements:

24 hour sample conditioning

View More


Title:

Automotive Lighting Systems

Description:

Industrial Laboratory needed for testing and evaluation of automotive lighting systems, lamps and mirrors. This testing includes assisting in the development of company's own laboratory including design of facilities and purchase of equipment.



View More


Title:

1-(2,6-dimethylphenoxy)-2-(3,4-dimethoxyphenylethylamino) propane Analysis

Description:

ISO 17025 Environmental Chemistry Laboratory needed for water testing for quantification of 1-(2,6-dimethylphenoxy)-2-(3,4-dimethoxyphenylethylamino)propane from a water sample. Unknown # of samples. Water is likely surface/ground water or industrial wa...

Requirements:

Lab needs to have ISO 17025 accreditation

View More


Title:

Polythionate analysis from surface water

Description:

Environmental Laboratory needed for surface water testing for polythionates. No required reporting limits - best that can be achieved. There is no list for the specific polythionates so a total polythionate result would be OK.

View More


Description:

LONG-TERM TESTING Environmental Laboratory needed for ground water testing for gross alpha, gross beta, Uranium 223 and 226. Some water samples are potable and some non-potable.

View More


Description:

Food Company needs Environmental Microbiology Laboratory for pathogen testing of of dairy cow wastewater following treatment with composting worms in a modified large scale worm bin with wood chips. There would be a total of 10 samples and what I need n...

Requirements:

Interested in quantification of any pathogenic species present.

Thank you.

View More


Description:

URGENT Large Industrial Machinery Company needs Materials Laboratory for impact, failure analysis and identification of the cause of filtration liquid turning yellowish with use of white felt bags used for filtrating liquids We need to understand the caus...

View More


Description:

Farm needs EPA GLP certified environmental laboratory for water testing twice a year for volatile organic compounds.

Requirements:

Must be EPA GLP certified lab.

View More


Description:

LONG-TERM TESTING Large hospitality company needs food microbiology laboratory laboratory for monthly environmental monitoring microbial analysis of food sample, hand swab, water, and equipment

View More


Description:

Environmental Laboratory needed to identify residue which has accumulated inside a scrubber unit which is used to eliminate Hydrogen Sulfide gas in a wastewater treatment plant

Requirements:

none

View More


Description:

Food Analytical Chemistry Laboratory needed for Shelf life testing for infused water beverage.

View More


Description:

Industrial Laboratory needed for DIN Testing of Heat Shrink Sleeve as per DIN EN 12068 Stress Class C 60 UV

Requirements:

As above

View More


Description:

Pump manufacturer needs industrial laboratory for performance and life testing on submersible pumps.

View More


Description:

Laboratory needed for water treatment equipment testing to NSF/ANSI 419 testing of ultrafiltration membrane module

View More


Description:

LONG-TERM TESTING Industrial facility requires weekly collection ATU-BOD (as O2) analysis from onsite 24hr composite sampler on final effleunt.

Requirements:

Weekly collection and analysis.

View More


Description:

Environmental management company needs geology laboratory data related to quality of Garnet for industrial use. The project involves separation of the garnets form host rock to determine the type of garnet, it's content and hardness.

Requirements:

Please provide prices

View More


Description:

Microbiology laboratory needed for performing Minimum Inhibitory Concentration (MIC) assay of the 7 antibiotics against bacteria: Chloramphenicol, Amoxicillin, Colistin, Doxycycline, Tiamulin Fumarate, Tylosin

View More


Description:

Large industrial supplier needs plastics laboratory for roughness testing on rubber sheets.

View More


Description:

University researcher needs environmental laboratory for groundwater testing for pharmaceuticals and concentrations.

Requirements:

Would like laboratory that routinely tests groundwater in Eastern USA, can help with protocol and make recommendations as to the pharmaceuticals that may be detected.

View More


Description:

Materials laboratory needed for flammability of industrial, coated textiles to two BS Specifications including: BS 7837:1996,Specification for flammability performance for textiles used in the construction of marquees and similar textile structures BS ...

View More


Description:

Industrial Hygiene Laboratory needed for Vapour Monitor testing (Sampling Badge - 3M) for 30 samples.

View More


Description:

LONG-TERM TESTING Environmental chemistry laboratory needed for adsorbable organic halides AOX testing in wáter

View More


Description:

Mining company needs geotechnical laboratory for complete analysis of ore sample for their compounds and elements and their proportions. Analysis is to assess the precious metal, rare earth and complex compounds for industrial use.

View More


Description:

Chemical company needs analytical chemistry laboratory for purity testing of industrial isopropyle alcohol

View More


Description:

Environmental analytical chemistry needed for biogas testing for the major gases (methane, carbon dioxide), hydrogen sulfide, and BTU determination of the biogas (anaerobic digester headspace gas). Siloxanes may be added to this requested analysis list.

View More


Description:

Large engineering company needs radiochemistry laboratory to measure the radiological parameterst including Gross Alpha, Bg/L and Gross Beta, Bq/L in water.

Requirements:

We are based in Singapore, so a lab available nearby will be great

View More


Description:

Environmental laboratory needed for analysis of groundwater and soil for ethylene oxide, diethanolamine, and triethanolamine

Requirements:

Six samples, groundwater and soil, for ethylene oxide
Three samples, groundwater and soil, for diethanolamine and triethanolamine

No required reporting limits whatever could be achieved. Lab must have a soil import permit. Soils from an internationa...

View More


Description:

Environmental toxicology laboratory needed for EPA 129 priority pollutants testing under the EPA Clean Water Act CWA.

View More


Description:

URGENT TESTING Polymer laboratory needed for certificate of analysis COA testing required on three polymer products used in waste water treatment. Testing results needed by Saturday, June 24.

View More


Description:

Environmental analytical chemistry laboratory needed for simultaneous HPLC analysis of multiple mixtures of anionic, cationic, nonionic, and amphoteric surfactants in environmental surface waters and effluents. HPLC with low ppm or ppb LOD required.

View More


Description:

Environmental laboratory needed for an EPA environmental baseline study (EBS) with analysis of the EPA Priority 16 polycyclic aromatic hydrocarbons (PAH) in open ocean seawater according to EPA 8270D Semivolatile Organic Compounds (SVOC) by GC/MS.

Requirements:

,

View More


Description:

LONG-TERM TESTING European environmental laboratory needed for water testing of greenhouse water supply used in the production of tomatoes. Testing for pH, EC, NH4, K, Na, Ca, Mg, NO3, Cl, S, HCO3, P, Si, Fe, Mn, Zn, B, Cu, and Mo.

View More


Description:

Large corporation needs analytical chemistry laboratory needed for water testing to determine the National Aerospace Standard (NAS) value of their demineralized water.

View More


Description:

University researcher needs environmental laboratory for water testing for the amount of Glyphosate in at least 9 water samples. Analysis is part of graduate research study on the effects of round-up on insect larvae and involves treatment of water at 3 d...

Requirements:

Please provide cost.

View More


Description:

FDA GLP and EPA Industrial Hygiene laboratory needed for antimicrobial efficacy testing of a organo-silane antimicrobial agent against a variety of viruses including Norovirus, H1N1, Rotavirus and Ebola to demonstrate efficacy. The active antimicrobial i...

Requirements:

Laboratory must be GLP registered and have the necessary qualified and accredited personnel to conduct the testing. The laboratory must also be acceptable to US EPA,
US FDA and equivalent organizations internationally.

Confidential

View More


Description:

Industrial hygiene microbiology laboratory needed for NIOSH tuberculosis testing from an industrial hygiene sample by NIOSH Method 0900, Mycobacterium Tuberculosis, Airborne.

View More


Description:

URGENT TESTING: Large corporation needs industrial hygiene laboratory for equipment cleaning validation study testing using Texwipe TX751 to test for the antibiotic telafloxacin; 84 swabs (maximum allowed is 200mcg per sample); and Texwipe TX714K to test ...

Requirements:

We prefer that the lab to provide the specified swabs to swab the equipment. Please let us know if we need to order them as this is an urgent request for testing.

View More


Description:

Environmental microbiology laboratory needed for OECD biodegradability testing of industrial lubricants to OECD 301B Biodegradation Test CO2 Evolution

View More


Description:

Environmental chemistry laboratory needed for water and sediment analysis for the following antibiotics by SPE:
1: Ampicillin
2: Sulfamethoxazole
3: Tetracycline
4: Trimethoprim
5: Ciprofloxacin
6: Erythromycin
...

View More


Description:

Analytical chemistry laboratory needed for water testing for electrical conductivity, pH, total dissolved solids, total suspended solids, and trace minerals / pesticide / drug residues / impurities including potassium, sodium, magnesium, calcium, ammonium...

View More


Description:

US FDA certified water laboratory needed for chemical and microbiological testing on potable and purified water.

Requirements:

India.
Should be an USFDA approved Indian company, full chemical and microbiological test have to be done according to US FDA regulations.

View More


Description:

ISO 17025 accredited industrial hygiene microbiology laboratory needed for BRC, USDA, FSMA bacterial contamination testing of an industrial food facility to comply with BRC, USDA, and FSMA standards.

View More


Description:

Microbiology laboratory needed for water testing for mean dissolved oxygen difference (MDOD) in polyethylene tanks.

View More


Description:

Industrial chemical laboratory needed for XRD analysis of silica to determine if the sample is amorphous.

Requirements:

The complete chemical analysis, including trace components that might be detrimental to the marketing of the product for human consumption.
The complete crystallographic characterization of the sample, is it amorphous silica, or is it something else, lik...

View More


Description:

NIOSH laboratory needed for industrial hygiene testing: hazardous material surveys for asbestos, lead (Pb), tributyltin (TBT), poly-chlorinated biphenyls (PCB), and mercury. Please provide a quotation for asbestos sampling, screening, and analysis (by PLM...

View More


Description:

Large agri-food company needs a food microbiology laboratory for AOAC 17th; FDA BAM testing of oat fiber for Shigella and S. haemolyticus.


Requirements:

Tests to be ran on samples of oat fiber- a fibrous powder we make for use as food-grade industrial ingredient. Sample material will absorb approximately five times its weight in water.

Shigella / 25gm Negative
S. haemolyticus / 25gm Negative

View More


Description:

Physical laboratory needed for mechanical durability testing of industrial glass tubes.

View More


Description:

Large industrial technology company needs electrical laboratory for IEC electrical performance and EMC testing of electrical substation relay to IEC 61810 or 60255 standards

Requirements:

Performance testing, Environmental testing and EMC testing as per IEC 61810 or 60255 standards

View More


Description:

Water agency needs Metallurgical Laboratory needed for corrosion testing including pitting depth from corrosion on 1 Type K Soft copper tubing.

View More


Description:

Certified Analytical chemistry laboratory needed for testing for the amount of dissolved hydrogen gas in ionized water.

Requirements:

Will send water ionizer to be used to produced ionized water which samples will be taken and tested for the amount of dissolved H2 gas.

View More


Description:

Environmental analytical laboratory needed for wastewater testing for AOX, EOX, and POX to European and American regulations

Requirements:

Technology for meeting the European and American regulations.

View More


Description:

LONG TERM. Industrial hygienic laboratory needed for vapor pressure testing of vacuum pump fluids.

View More


Description:

GLP combustion laboratory needed for UN-Bowes-Cameron-Cage-Test self-ignition testing on Copper Oxychloride 30% + Mancozeb 20% WP. Quote needed.

Requirements:

UN-Bowes-Cameron-Cage-Test self-ignition test
GLP

View More


Description:

Analytical chemistry laboratory needed for JIS-K2211 (annex C,D) testing for chemical stability with refrigerant and compatibility.

Requirements:

JIS-K2211 (annex C,D)

View More


Description:

Automotive textiles company needs materials laboratory needed for SAE accelerated weathering testing to SAE J2527 testing using Q-Sun Xenon Test Chamber Xe-3 weatherometer or similar machine (xenon accelerated weathering of fabric) for 500 hours and 1000...

Requirements:

SAE J2527 using Q-Sun Xenon Test Chamber Xe-3 weatherometer or similar machine

View More


Description:

Industrial laboratory needed for elastic modulus testing of a textile conveyor belt as per DIN EN ISO 9856.

View More


Description:

Polymer laboratory needed for Tg (glass transition temperature) testing of a polyacrylate, which is provided in an emulsion. Determination of Tg of a polyacrylate, which is provided in an emulsion mixture. The emulsion includes the polyacrylate, an additi...

Requirements:

Determination of Tg of a polyacrylate, which is provided in an emulsion mixture. The emulsion includes the polyacrylate, an additional polymer (which may also be a polyacrylate), water and at least two more non-polymeric materials. The mixture will be sen...

View More


Description:

Materials laboratory needed for ASTM Testing for waterproofing of a membrane to ASTM C836, Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

Requirements:

ASTM C836

View More


Description:

Materials laboratory needed for ASTM testing for fire extinguisher compliance and safety testing to meet AHRI standards using the following guidelines:

- Purity (according to ASTM D6806)

- Acidity (according to AHRI 2008 Appendix C to 700-2014 Part ...

Requirements:

ASTM D8060-16
ASTM D6806
AHRI 2008 Appendix C to 700-2014 (Part 1, 2, 3)
FTIR spectrum analysis

Extinguishing agent 2BTP (2-Bromo-3,3,3-Trifluoro-1-Propene)

View More


Description:

Toxicology laboratory needed for LD50 Toxicity Study for plant derived odor control product.

Requirements:

use low cost animal for this test

View More


Description:

Microbiology Laboratory needed for ASTM or ISO biodegradability testing to ISO14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide or ASTM...

Requirements:

Asia

View More


Description:

Industrial chemical laboratory needed for REACH compliance testing of p-phenylene diisocyanate focusing on physico-chemical, toxicology and eco-toxicology; tonnage band of 10-100 tonnes/year.

View More


Description:

Toxicology / Product Safety Laboratory needed for REACH testing of 4 substances, all within the 1-10 tonnes PA tonnage band.

View More


Description:

Large petroleum company needs Industrial chemistry laboratory for ASTM petrochemical testing to ASTM D8031-16 for acid number of terephthalic Acid (TA) by automatic potentiometric titration.

Requirements:

ASTM D8031-16

View More


Description:

Environmental toxicology laboratory needed for testing for the presence of AOX, EOX, and POX in wastewater to meet EPA standards.

Requirements:

EPA standards

View More


Description:

Explosives laboratory needed for ISO testing of protective clothing for abrasive blasting to ISO 14877

View More


Description:

Food laboratory needed for CODEX testing of iodate and iodine from industrial salt via CODEX STAN 150-1985 methods.

Requirements:

Analysis via CODEX STAN 150-1985

View More


Description:

Agriculture Laboratory needed for AOX analysis and pesticides in food and environment

View More


Description:

Large automotive company needs packaging laboratory for ISTA industrial packaging resistance testings labs (norm ISO-13194 or ISTA 2B/3E or local norm for at least stacking compression test + shock + vibration)

View More


Description:

Industrial firm needs materials laboratory for ASTM Testing of plant spray oil for ASTM D483 compliance

View More


Description:

Laboratory needed for Transmittance Test for UTMB Hospital waste water UV light used for sterilization

View More


Description:

Microbiology Laboratory needed for disinfectant efficacy testing of 3 different products to BS EN 1276:2009- Chemical disinfectants and antiseptics ?Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and ant...

View More


Description:

Electroplating company needs Industrial Hygiene Laboratory Air Quality measurement for plant in Asia

View More


Description:

Urgent Need by Large UAE construction company for testing of foam materials per BS EN 13468 (Thermal insulating products for building equipment and industrial installations. Determination of trace quantities of water soluble chloride, fluoride, silicate, ...

Requirements:

please send me the quotation on above test method and lead time asap.

View More


Description:

Long term need for a toxicology laboratory in India to test urine samples for benzene. Industrial facility needs occupational hazardous materials evaluation to determine effectiveness of protective measures used by employees.

View More


Description:

Building Supply company needs laboratory to test thermal insulating products for building equipment and industrial installations. Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH per BS EN 13468 test for...

Requirements:

BS EN 13468 test for insualtion foams

View More


Description:

Healthcare facility needs Clinical laboratory for urine/blood testing for the biological indices of industrial chemicals. Please specify the cost.

View More


Description:

University needs industrial hygiene laboratory for solid waste management worker monitoring testing: Hair and nail samples for: HEAVY METALS (LIKE MERCURY, CADMIUM, ARSENIC. CHROMIUM LEAD)

Requirements:

ICP AAS TECHNIQUE

View More


Description:

Large Industrial Bioscience Company needs pre-clinical contract research organization genotoxicology studies on substance including Ames and Chromosomal aberration studies.

Requirements:

To conduct a 90-day oral gavage study in rats and in vitro genotoxicity assays (Ames and Chromosomal Aberraton) in the first quarter 2017. Test substance should be available early March 2017. Provide information on how soon after test substance is recei...

View More


Description:

Industrial Third-Party ISO 17025 Laboratory needed for IEEE, ANSI and UL Testing of 9 cables flammability and toxicity testing: FT4/IEE1202 flame propagation test and ANSI/UL1685 smoke release test, and BSS7239 toxicity test, please let me know the cable...

Requirements:

the lab needs to have ISO17025

View More


Description:

Environmental laboratory needed for Facility Stormwater testing.

View More


Description:

Laboratory needed for fluid and water testing of fluid and water used for new-technology fog making machines.

Requirements:

Manufactures is based is Europe and will be exporting to USA. Laboratory in Europe

View More


Description:

Physical Laboratory needed for FDA Testing of new portable water filtration device with ceramic filter ,ion exchange resin , carbon fiber , nano cluster media

View More


Description:

Industrial Hygiene Laboratory needed for swabbing and environmental monitoring testing for medical office

View More


Description:

Mechanical Test Center needed to run the test study on industrial springs used in suspension cars (cyclic test, corrosion, etc.).

View More


Description:

Packaging laboratory needed for bottles and caps testing for bottled water.

View More


Description:

Analytical chemistry laboratory needed for Glassware Inhibitory residue test -on powdered hand wash laboratory glassware detergent. test needs to be performed according to the procedure described in ?Standard Methods for the Examination of Water and Waste...

View More


Description:

India Manufacturing Company needs metallurgical laboratory for silver alloy electrical contacts testing: detailed mineralogical analysis of industrial waste.

View More


Description:

Canada Food Laboratory needed for drinking water testing after UV processing. Testing for iron ppm, hardness gpg, turbidity ppm, manganese ppm, tannis ppm and UV Transmittance..

View More


Description:

Industrial cleaning equipment company needs virology laboratory for Virucidal efficacy testing on Avian influenza virus (AIV),, H7N1Noroviruses, Adenovirus & Polivirus

Have to test efficacy of electrolyzed water or Hypochlorous Acid solution (ph 6.5-7...

Requirements:

Avian influenza virus (AIV), H7N1
Noroviruses
Adenovirus & Polivirus

View More


Description:

Europe laboratory needed for wastewater testing: five analyses requested:
1. BOD
2. TSS
3. Fecal Coliform
4. pH
5. Total chlorine

Requirements:

Analyses are for treated wastewater from ship in Iceland

View More


Description:

LONG-TERM TESTING: ISO 17025 Environmental Microbiology Laboratory needed for Testing, Water Quality Testing, Water Portability testing, 740 samples.

View More


Description:

Environmental analytical chemistry laboratory needed for water analysis for Dissolved Zirconium analysis of water samples. 20 samples field filtered to 0.45 microns

Requirements:

Detection Limit of 0.005 mg/L or lower

View More


Description:

Materials laboratory needed for ASTM Chemical degradation and permeation testing as per ASTM 739-12 for Industrial rubber gloves for 84 chemicals

Requirements:

Testing with alList of upto 84 chemicals

View More


Description:

EnvironmentalLaboratory needed for OECD Testing of Sewage Treatment Water to OECD 303 for zinc phytate
Simulation Test - Aerobic Sewage Treatment -- A: Activated Sludge Units; B: Biofilms
(TSG requirement)
This Test Guideline describes two simulations...

View More


Description:

LONG-TERM TESTING Ontario Accredited Environmental Laboratory needed for groundwater testing : ethane analysis

Requirements:

preferably an accredited lab

View More


Description:

Industrial Hygiene consulting firm needs laboratory that will do analysis for propylene glycol dinitrate

Requirements:

none

View More


Description:

University researcher in Plant Protection needs agriculture laboratory for water testing of water samples used for agricultural irrigation. Please provide quotation for the respective analyzesand duration of the analysis as well as the procedures for subm...

View More


Description:

India conglomerate needs industrial hygience laboratory to conduct air & water quality testfrom 4 different places. Air samples to be collected and one water sample for testing. Please give quotation for the same.

View More


Description:

Food analytical chemistry laboratory needed to test acetaldehyde (AA) on plastic (PET) preforms & bottled drinking water..

View More


Description:

Robotics Laboratory needed for development and evaluation studies of robotic equipment to ISO/TR 13309:1995 Manipulating industrial robots -- Informative guide on test equipment and metrology methods of operation for robot performance evaluation in accord...

View More


Description:

Environmental Analytical chemistry laboratory needed for wastewater testing for Adsorbable Organic Halogens, AOX in waste wáter,

Requirements:

AOX

View More


Description:

Environmental laboratory needed for USEPA potable and non-potable water testing to USEPA method 522 for potable and non-potable water. 1-4 dioxane

Requirements:

prefer lab in the northeast which can run USEPA method 522 for potable and non-potable water.

View More


Description:

Mining company engaged in the exploration of mineral deposits, mining of tantalum, industrial minerals and fashioning of gemstones needs geology laboratory for Chromium (chromite) testing of mineral deposits.

View More


Description:

Asia laboratory needed for drinking water testing prior to distributing to government authorities.

View More


Description:

Mechanical Laboratory needed for industrial spring testing: KLT tests (Key Life Tests) for transportation springs according to company specified operations for performance as per our document. We look forward to hear your feedback.

View More


Description:

Industrial Engineering firm needs performance laboratory accelerated aging process and adhesive strength study testing. The two products bonded together are fabric backed sandpaper and a plastic, 1/2 diameter cylinder. We are testing several different ...

Requirements:

The most realistic test would be torque required to break the sandpaper loose from the cylinder. The torque load on the parts will also be vibrating (not sure that can be tested).

View More


Description:

India environmental laboratory needed for sludge testing of sludge generated after treatment of Industrial wastewater (containing toxic metals etc) & also ground water samples for the parameters approved by CPCB.

View More


Description:

Energy company needs laboratory for fuel testing. I have three samples (Light Ends, Solvent, and Industrial Diesel Fuel) that would require the tests the following tests:
? Appearance (physical state, color, etc.);
? Upper/lower flammability or explosiv...

View More


Description:

Life Sciences Company developing medical treatments needs Industrial Hygiene Laboratory for environmental monitoring testing 1. Environmental monitoring is being performed on February 8, 9, and 10
- Sampling is performed using a viable particle counter a...

View More


Description:

India Certification Laboratory neded for UL Certification Testing of Synchronisation time module as per the standard aUL 61010-2-201?.
Components are used in:

1. The ControlLogix backplane for Coordinated System Time (CST) and Coordinated Universal Ti...

Requirements:

Couple of queries;
Query 1: Can we do the certification for Synchronisation time module as per the standard ?UL 61010-2-201? in India?
Query 2: What are the UL certification test applicable for this product? (Group: Industrial product for time synchroni...

View More


Description:

Analytical Laboratory needed for EPA Testing of water samples using any of the following methods:
EPA 300.1,DETERMINATION OF INORGANIC ANIONS IN DRINKING. WATER BY ION CHROMATOGRAPHY

EPA 317.0,DETERMINATION OF INORGANIC OXYHALIDE DISINFECTION BY-PRO...

View More


Description:

Industrial milk company needs Eastern Europe agriculture laboratory needed for roughage testing and manure testing. What is the price and conditions of testing? What are your testing parameters? What the minimum amount of material and packaging is necessa...

View More


Description:

India Geology needed for granite testing to test the stone to check whether this can be used for industrial purpose in large scale .

View More


Description:

Certification laboratory needed for Industrial Fabrics Association International for flame-resistant material CPAI - 84 on a tent

Requirements:

Need certificate.

View More


Description:

Physical laboratory needed for cut resistant testing to ANSI/ISEA 105 to test industrial glove cut resistant level. Please specify how much it costs and what's the lead time from sample receiving.

View More


Description:

North of Italy testing house (testing laboratory) needed for EN optical tests over a multi beam safety light curtain for industrial application according to Machiney Directive 2006/42/EC and standard EN 61496-2:2013

Requirements:

Requirements for tests specified into the standard EN 61496-2:2013

View More


Description:

India laboratory needed for industrial products testing.

View More


Description:

Investigative Journalist Team needs Europe food laboratory for additive testing in multiple mainstream for undeclared industrial exogenous enzymes, inhibitors, other additives. While not illegal, we would like to prove the presence of these exogenous add...

Requirements:

We need lab determine which industrial enzymes + Inhibitors + Additives are present in all of the beers we submit. We would submit 12 beers.

View More


Description:

Manufacture of rubber parts and seals for industrial applications needs materials laboratory for certificaiton testing of seals

View More


Description:

OSHA / EPA Certified North Carolina Industrial Hygiene Laboratory needed for cotton dust exposure concentration

Requirements:

Certified - OSHA/EPA

View More


Description:

Industrial Hygiene laboratory needed for urine analysis for DCB (dichlorobenzidine)

View More


Description:

Kazakhstan Industrial Hygiene Laboratory needed for AIHA Industrial Hygiene Testing (Infrared Spectrometry, Gravimetric analysis, Fluorescence, high performance liquid chromatography and Ion Chromatography) samples analyzed and turned around for various a...

Requirements:

Needs to meet AIHA (American Industrial Hygiene Laboratory) or UKAS (United Kingdom Accreditation Services) requirements, and have a relatively short turnaround time (2-3 weeks max). Confidential

View More


Description:

Industrial laboratory needed for Water testing of wastewater of manufacturing businesses

View More


Description:

Large corporation needs analytical chemistry laboratory for pheool testing for phenolic compound in polyester yarn, industrial soda ash, silicon base softner.

Requirements:

Phenolic group

View More


Description:

LONG-TERM Analytical chemistry laboratory needed for gas chromatography testing of concentrate derived from legal industrial hemp plants that has been legally imported from Europe. We need to confirm the Cannabinoids as well as the THC content.
The THC i...

Requirements:

Gas Chromatography

View More


Description:

Industrial Consumable manufacturer needs mechanical laboratory for ASME Testing: Residue analysis of Developer, Remover and Penetrant and we want to test them.

View More


Description:

China industrial waste laboratory needed for industrial hazardous waste testing as follows,

1] Test waste sample for Ash content & heating value.
2] Melt waste sample and collect slag to measure slag properties & weight.

Coul...

View More


Description:

Consumer Products Laboratory needed to test laundry detergents for use in industrial applications. More specifically, we have detergent technologies that we currently sell into consumer laundry applications, but would like to test their efficacy against u...

View More


Description:

India NIOSH industrial hygiene laboratory needed for occupational health testing 1, Benzene (Method: NIOSH 1501)
2, Perchloro Ethylene (Method: NIOSH 1003)
3, Ammonia (Method: NIOSH S347)
4, Naphthalene (Method: NIOSH 1501)

Requirements:

1, Benzene (Method: NIOSH 1501)2, Perchloro Ethylene (Method: NIOSH 1003)3, Ammonia (Method: NIOSH S347)4, Naphthalene (Method: NIOSH 1501)

View More


Description:

British Columbia industrial hygiene laboratory needed for employee evaluation for olfactory capacity on yearly basis.

View More


Description:

United States industrial microbiology laboratory needed for microbial Identification of entero virus D 68 strain from surface samples.

View More


Description:

Engineering firm needs Electrical and mechanical Laboratory for Life cycle testing of industrial cleaning equipment

View More


Description:

Law firm needs USA Experienced industrial hygiene laboratory for pet food plant grain mill grain dust an grain testing for aflatoxins to determine whether or not the factory met the safety standards of the industry.

Requirements:

CIH that has experience with grain milling/dust at food or pet food factories

View More


Description:

Industrial Hygiene laboratory needed of ASTM elemental trace analysis of the indoor air in our manufacturing building using ICP-MS or GC-MS. Mainly we're most concerned about sulfur. There will be 7-8 samples.

Requirements:

ASTM

View More


Description:

Third-party laboratory needed for compliance testing of industrial grade modems for automation & instrumentation CCC for China...what is needed from us, the estimated cost, time-line and any other pertinent details.

Requirements:

CCC for China

View More


Description:

Industrial Hygiene Laboratory needed for MIL-SPEC oxygen testing of AVIATOR'S BREATHING GAS in order to confirm the compliment of the specification MIL-PRF-27210, the sample can be send to your laboratory Airline

View More


Description:

USA Industrial Company needs ASME certified environmental laboratory for ASME clean water tests to determine DO transfer levels, BOD levels, and other Water Testing needs. Lab has to be ASME certified.

Requirements:

ASME certified

View More


Description:

India NABL and ISO Laboratory needed for ASTM and IEC Testing of industrial connectors, we would like to test our products as per IEC 61076-2-101.
For further & detailed requirements please email me.

Requirements:

NABL, ISO, ASTM

View More


Description:

Power and Energy company needs Saudi Arabia Industrial Hygiene laboratory for industrial hygiene monitoring sample analysis or testing.

View More


Description:

Industrial Hygiene laboratory needed for NIOSH Testing for organotin compounds (NIOSH 5504, using AAS)

View More


Description:

India Industrial Hygiene Laboratory needed for Workplace monitoring , Noise Level Monitoring, Effluent water sample, drinking water testing

View More


Description:

URGENT Industrial Hygiene Laboratory in (i) Mauritius (ii) South Africa (iii) Nairobi urgently needed to perform industrial hygiene testing.

View More


Description:

Manufacturer of industrial helmets,Police Helmet & Fireman Helmets need India NABL Laboratory to test safety and protective helmets for Shock Absorption Test, Flammability Test , Penetration Ttest, Electrical Breakdown Test, Rigidity Test, Plumb Bob Test ...

Requirements:

NABL

View More


Description:

United Arab Emirates ISO/ TeC 17025 Industrial Hygiene Laboratory needed for analyses of workplace industrial hygiene samples, such as crystalline silica, dust, welding fumes, fiber counts, etc.

Requirements:

ISO/TEC 17025

View More


Description:

Marine engineering laboratory needed for black beach sands physical and chemical testing in order to evaluate and determine the feasibility to install a processing industrial plant to separate and recover important elements contained in the raw material. ...

View More


Description:

Industrial Hygiene Microbiology Laboratory needed for Industrial Hygiene Testing:
Microbiological Testing and Metals Testing required are: Fungal Spores, Pathogens, Metals, and Pesticides. The media is dollar bills.

Requirements:

It should remain confidential

View More


Description:

Oil and petroleum laboratory with the following testing capabilities: The unit examines and analysis the petroleum products as following:- Engine Oils Auto Transport Oils Hydraulic Oils Gear Oils Industrial oils Gasoline Brake fluid Cooling water The most...

View More


Description:

ISO 17025 OSHA Industrial Hygiene Laboratory needed for MDI, TDI, HDI using OSHA 42 test method. Lab must be accredited

Requirements:

Lab must be accreditad (ISO 17025).

View More


Description:

OSHA industrial Hygiene laboratory for respiratory fit testing

Requirements:

osha

View More


Description:

Large Consumer Products Mfg needs analytical chemistry laboratory for ISO Testing. Capable of runnign ISO 3704-SULFUR FOR INDUSTRIAL USE - DETERMINATION OF ACIDITY - TITRIMETRIC METHOD

View More


Description:

India NABL Occupational Health and Industrial Hygiene Laboratory needed for OSHA Testing. Chemical Testing of Trichloroethylene [OSHA 07]
Acetone [OSHA 07]
Butyl acetate [OSHA 07]
Isopropyl Alcohol [OSHA 07]
Hydrocarbon: IS 5782

Requirements:

NABL

View More


Description:

test some of our products such as dishwashing liquid, shampoo and industrial cleaner and Consumer Products Laboratory needed for efficacy testing, microbiology testing and physical testing of degreaser for cleaning efficacy, physical properties such as pH...

View More


Description:

North Dakota environmental and analytical chemistry laboratory needed for waste water testing: Chemical Oxygen Demand (COD) testing of effluent waste water for industrial food processing plant. Approximately 30 COD tests will need to be performed.

Requirements:

Confidential

View More


Description:

Industrial Chemical Manufacturer needs analytical chemistry laboratory for sanitizer soap testing: concentration of Chlorhexidine digluconate (4 samples) and chlorxylenol ( 4 samples) in sanitizer soap.

View More


Description:

Asia Analytical Chemistry and Microbiology Laboratory needed for formulation and stability testing of industrial, household and personal care products, for example industrial cleaner and degreaser, descaler, bathroom cleaner, oven cleaner, dish washing li...

View More


Description:

USA NVLAP Industrial Hygiene Laboratory needed for lead testing from dust samples taken.
Lab must recognized by NLLAP
Do they provide materials and forms to conduct dust collection.
Does the lab perform all mathematical calculations

Requirements:

Confidential

View More


Description:

Analytical chemistry laboratory needed for lubricant testing to deformulate/reformulate an industrial lubricant. This is a wool grease(lanolin) based imported product."

Requirements:

I would like to remain confidential.

View More


Description:

Large Chemical Manufacturer needs Industrial Hygiene or Occupational Health Laboratory for Industrial Hygiene Testing: sample analysis requiring HPLC/UV analysis

Requirements:

requiring the use of HPLC/UV analysis. Lab must be accredited (preferrably to ISO17025). contact information confidential

View More


Description:

Canada Materials Laboratory needed for gear lubricant testing: Gear lubricant 'Optigear Synthetic X220'
Mfr.: Castrol Industrial North America, Inc.

Requirements:

Please provide a quote to analyse and determine ingredients

View More


Description:

Industrial Hygiene Laboratory needed for mercury exposure testing on clothing.

View More


Description:

USA Industrial Hygiene Laboratory needed for acoustics testing: Occupational noise measurements due new machines(manufacturer facilities)

View More


Description:

USA Nanaotechnology Laboratory needed for nanoparticle testing. First project is for nanoparticles' surface functionalization. We need to find a solution to disperse metallic inorganic nanoparticles (chalcogenide nanoparticles: 50-180nm) in the industrial...

View More


Description:

USA Industrial Hygiene Laboratory needed for ASHRAE Testing to ASHRAE Standard 52.2-2007 -- Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size (ANSI approved)

View More


Description:

Analytical Chemistry Laboratory needed for fluid testing. Have 1 55 gallon drum of fluid on our ship that needs to be identified. Most likely Industrial marine grade acid cleaner or soap- possibly Alumabrite or Aquasalt 20 20

Requirements:

Request Confidentiality

View More


Description:

Mexico EMA Accrediation, USA based laboratory needed for Industrial Hygiene Testing to STMP, OSHA and NIOSH methods

Requirements:

Mexico EMA Accrediation, USA based lab, please keep contact and company info confidential.

View More


Description:

West Coast USA Industrial Hygiene Laboratory needed various employee screenings

View More


Description:

Industrial Hygiene Laboratory needed for hearing testing. hearing tests in my workshop area to find out what type of hearing protection is needed"

View More


Description:

UKAS, GLP Japanese Industrial Standard JIS Testing to JIS Z 2801 Method for determining efficacy of antimicrobials

Requirements:

UKAS,GLP

View More


Description:

Medical Device Laboratory needed for PMDA Testing (Pharmaceuticals and Medical Devices Agency, Japan) Performance Testing: \Performance measurements of diagnostic ultrasound as per Japanese Industrial Standard JIS T 1501:2005

two samples (two different...

Requirements:

PMDA (Pharmaceuticals and Medical Devices Agency, Japan) - Japanese equivalent of FDA Please keep confidential

View More


Description:

India clinical industrial hygiene NABL laboratory needed for urine testing for phenol
number of sample 15

Requirements:

NABL

View More


Description:

Canada Textile Labroatory needed for AATCC Testing and NFPA Testing to AATCC 135, NFPA 2112 Chapter 8.1.3. Wash testing fabric for shrinkage analysis. Consumer and Industrial

Requirements:

AATCC 135, NFPA 2112 Chapter 8.1.3

View More


Description:

Asia Electrical Consumer Products Laboratory needed for Air Conditioner Performance Testing: ISO Testing and JIS Testing to ISO 5151(1994)and Jpanese Industrial Standard Testing JIS C 9612 for window Type air conditioners - 1 Pcs

Requirements:

ISO 5151(1994)JIS C 9612

View More


Description:

Florida Industrial Hygiene Laboratory needed for radiation testing. 1. Testing of urine for radiation
2. Testing of United States Gypsum Drywall for Radioactive Material

Requirements:

confidential

View More


Description:

Occupational Health Laboratory needed for industrial hygiene testing: environmental monitoring testing for heparin in air and surface samples.

View More


Description:

Israel industrial hygiene laboratory needed for OSAH occupationa health testing to osha pv 2132 7328-17-8
2-2ethoxyethoxyethylacrylate
from chromosorb 106 tube

View More


Description:

Industrial Safety Laboratory needed to Precisely define the limits of styrene flammability in our processes and potentially allow us to fine-tune our meager air O2 content max limit. that a 2% mix of styrene in N2 was not flammable with 7% or 10% O2, but ...

Requirements:

Required if any.

View More


Description:

Singapore Industrial Hygiene laboratory needed to determine the efficiency of air purification unit to eliminate viruses.
-Some virus we are interested in will be:
-Hand Food Mouth Disease (Coxsackie virus and Enterovirus 71),
-Common cold and flu vi...

Requirements:

FDA. Confidential.

View More


Description:

UAE Industrial Hygiene Laboratory needed for occupational health Testing of Benzene and Glycol exposure monitoring tubes.

Following is the detail of the tubes:

COCONUT CHARCOAL TUBE - for Benzene
ANASORB CSC 2-PART 6MM X 70MM GS
Part No: 226-01 ...

Requirements:

Not Specific please keep contact and company information confidential at this point

View More


Description:

Europe, Asia or South America AIHA Occupational Health Laboratory needed for Industrial Hygiene analysis - industrial exposures, particualtes, gases, fumes and vapours.

Requirements:

AIHA or equivalent.

View More


Description:

Canada Physical Laboratory needed for ANSI Testing, Glove testing ANSI
industrial workglove, glove has EN cut resistant testing we need ANSI

Requirements:

ANSI

View More


Description:

Canada NIOSH, OSHA, EPA Industrial Hygiene Laboratory needed for NIOSH, OSHA Industrial Hygiene Testing for amount of bituminous coal on repairable dust ...maybe we can take a pump let run for many horas to collect a lot of repairable dust ( NIOSH 600 ) ...

Requirements:

NIOSH..OSHA ..EPA ASTM

View More


Description:

Shanghai, China Transportation Laboratory needed for US DOT Testing in Compliance with US Department of Transportation FMVSS125 StandardUSDOT FMVSS125 description.

Requirements:

Testing should comply with USDOT FMVSS125 description. Our company is FairSun Industrial Co., LTD. We are located in Shanghai, China. Please keep this information confidential, since at this time we are merely conducting research into which laboratorie...

View More


Description:

Middle East Industrial Hygiene Laboratory needed for occupational health, personal hygiene testing of factory workers.

View More


Description:

USA AIHA Occupational Health Industrial Hygiene Laboratory needed for air testing: Trimellitic anhydride in air

Requirements:

AIHA Lab Plus NY

View More


Description:

Middle East industrial hygiene laboratory needed for acrolein testing. 25 personal samples for acrolein by passive monitor

Requirements:

Please keep contact information confidential at this time

View More


Description:

Industrial Hygiene Laboratory needed for toxicology testing:1. 6-panel non illicit worker's comp urine test 2. shipping supplies 3. option to purchase right to bill and collect for ROR or lab confirming report. 4. Licenced in multiple states including(CA,...

View More


Description:

Global provider of industrial and institutional cleaning products is looking for microbiology laboratory for DIN Testing, ASTM Testing or CEN Testing: EN 13727, EN 14348, EN 13624, EN 14476 (E 1052); E 1174, E 2613, E 2011. In vitro tests:each test report...

Requirements:

DIN, ASTM or CEN

View More


Description:

California NIOSH Industrial Hygiene Laboratory needed for NIOSH industrial hygiene testing of manufacturing plant workers for Airborne metals, dust, carbon monoxide , we would like to test for lead, copper, and nickel.

Requirements:

Niosh

View More


Description:

Analytical chemistry Laboratory needed for ISO Testing of industrial chemicals to ISO 14184-1 Formaldehyde - UV/VIS On water-based emulsion fluid samples

Requirements:

ISO 14184-1

View More


Description:

Physical Materials Laboratory needed for DIN Testing, IEC Testing of High pressure laminates for Industrial use . These laminates have IEC 60893 , DIN 7707 standards. We want to get them tested in a renowned labratory which has international recognition. ...

View More


Description:

Australia Microbiology laboratory needed for EPA ISO, AS microbiology laboratory needed for micro, tox, agriculture, soil contamination (chemical, mAustralia icro), dust/airborne mould spores, allergens, etc

Requirements:

EPA, ISO, AS, possible GMP/GLP, but typically domestic and light industrial office environmental testing

View More


Description:

Certification Laboratory needed for certification testing industrial products to ASTM D4101

View More


Description:

INDUSTRIAL FORENSICS LABORATORY NEEDED FOR FAILURE ANALYSIS TESTING

View More


Description:

India Industrial Laboratory needed to evaluate Radiator coolant 1) corrosion test 2) Average test in any 4 wheeler vehicle respective to any other readiator coolent available in the market.

View More


Description:

USA Industrial Forensics Laboratory needed to replicate what would happen if a aluminum pole (I have a exemplar) contacted a 7.2kV electrical power line.

Requirements:

None that are codified. This is a test request to observe and perhaps video what happens to the conductor and the aluminum pole upon contact.

View More


Description:

Analytical Chemistry to test compressed Natural Gas filter elements for Industrial CNG distribution and treatment. Number of tests <4
Filtration efficiency & Burst test

Requirements:

Any International standard for CNG filtration

View More


Description:

UK Industrial Chemistry Laboratory needed for process routes testing involving preliminary heating followed by leach filtration and crystallization at bench scale to extract a chemical from a raw mineral ore sample.

Requirements:

remain confidential

View More


Description:

Electrical Laboratory needed for electrical environment testing of an industrial control device tested to demonstrate robust operation in a noisy electrical environment. Electrical noise would be generated by large AC motors turning on and off.

Requirements:

to be determined.

View More


Description:

USA Analytical Chemistry Laboratory needed for testing chemical properties: surface tension, critical micelle concentration, water solubility

Requirements:

industrial use only -- confidential

View More


Description:

Australia Industrial Hygiene Laboratory needed for MEPS Testing.

Requirements:

Australian Standards

View More


Description:

Manufacturer of plastic curtains and screens that are used as safety welding screens in industrial environments needs Optical Laboratory to perform testing to determine how much light is passing through a welding curtain. The relevant standard is AWS sta...

Requirements:

AWS F2.3

View More


Description:

Industrial Manufacturer needs USA/China Physical Laboratory for cleanliness testing of industrial parts to millipore spec class B

Requirements:

millipore spec class B

View More


Description:

ISO Analytical Chemistry Laboratory needed for testing for determination of boric acid content of boric acid as per BS 5688-1:1979, ISO 1914:1972. Measure orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborat...

Requirements:

Standard number: BS 5688-1:1979, ISO 1914:1972

View More


Description:

Gouda Microbiology Laboratory needed for efficacy testing of various products. Would like to verify the laundry, baby wipes, hand cleaners and surface cleaners capacity of sanitizing in accordance to: ASTM E2406 - 09 (Standard Test Method for Evaluation o...

Requirements:

various

View More


Description:

Analytical Chemistry Laboratory needed for sludge analysis of dewatered sludge from an industrial (activated sludge treatment) wastewater treatment plant for isobutyraldehyde

Requirements:

No specific requirements but keep contact information confidential

View More


Description:

ASTM Materials Laboratory needed for
testing on PVC industrial coated polyester fabric in accordance to ASTM D2582 for MSHA approval.

View More


Description:

Westcoast USA ASTM Acoustics Laboratory needed to test some new wall panel designs on industrial air handling units (HVAC) for the following 3 properties: sound reduction, thermal transmission, and wall panel deflection (when the AHU is operating at up to...

Requirements:

Sound: ASTM E90 or ASTM C423 Thermal: ASTM C518 or ASTM C1363 Deflection: ASTM E72

View More


Description:

USA Physical Laboratory needed to test PVC industrial coated polyester fabric in accordance to ASTM D2582 for MSHA approval.

Requirements:

ASTM D2582 for MSHA Remain confidential

View More


Description:

Europe(Hungary) DIN Laboratory needed for the following testing in accordance to NF T30-77 NF X41-002 DIN 50018:
Humid mist 1000h;
Salt spray 1000h;
Industrial atmosphere 10 cycles, 0.66% SO2;
IP 55
Number of samples: one (1) piece / test type or as ...

Requirements:

NF T30-77 NF X41-002 DIN 50018

View More


Description:

Europe Environmental Laboratory needed for BOD test on industrial water treated sample.

View More


Description:

USA Product Safety Laboratory required for Testing for ANSI Z-89.1-2009 - Industrial Head Protection

Requirements:

ANSI Z89.1-2009

View More


Description:

Product Safety Laboratory required for testing industrial head protection according to ANSI Z89.1-2009

Requirements:

ANSI Z89.1-2009 Confidential

View More


Description:

India NABL Physical Laboratory needed for certification testing of stainless steel Bands / Buckles / Clips (For coating purpose material used as Black PPA - Thermoplastic and Black Polyester) made by using material SS201 / SS304 / SS316 /SS317L / MONEL 4...

Requirements:

NABL ACCRIDITATION

View More


Description:

Industrial parts washer manufacturer needs physical laboratory for cleanliness testing of industrial parts to match customer's millipore spec

Requirements:

spec to be submitted

View More


Description:

Pune NABL Accredited Electrical Laboratory
needed for IS-1651 testing of Industrial batteries as per IS 1651 from NABL accredited Lab.



Kindly confirm charges for Type testing .



Thanks & regards,

Foe Union Batteries pvt Ltd

(A...

Requirements:

IS-1651

View More


Description:

Large Electronics Mfg needs US or Ireland Microbiology Laboratory for industrial water testing that can detect both slow and fast growing bacteria, as well as fungi with a sensitivity down to ~80cfu/100 ml. "

Requirements:

Want to remain confidential

View More


Description:

Microbiology Laboratory needed for CLSI / NCCLS antibiotic susceptibility testing for one industrial bacterial strain for a total of 15 antibiotics/sulfamides."

Requirements:

preferrably in accordance with the CLSI/NCCLS reference method for antibiotic susceptibility testing.

View More


Description:

Textiles Laboratory needed for 100 wash industrial laundry testing on flame resistant garments. Chemcials and wash process provided. Garments will be tested for shrinkage, color change, and tensile strength at specified intervals through 100 washes.

View More


Description:

Washington Physical Laboratory needed for ongoing wash testing on clothing articles to determine appearance after multiple washes, as well as shrinkage factor.

Requirements:

Just need to wash garments in an industrial wash scenario.

View More


Description:

Chemical Mfg needs occupational health / industrial hygiene laboratories in China and USA. Active Pharmaceutical Ingredient and Isolated Proces Intermediates (API/IPI) for export. Many clients are in Europe.

Requirements:

GMP

View More


Description:

Environmental Laboratory needed for OECD Testing of industrial washer fluid for OECD 301A

Requirements:

OECD 301A

View More


Description:

USA OSHA Industrial Hygiene/Occupational Health Laboratory needed for Pulmonary function testing for use of respirators

Requirements:

OSHA

View More


Description:

US Environmental Laboratory required to test both water-based and solvent formulations for biodegradability. In the past we had used a lab in Europe for testing per OECD 301B to determine biodegradability. We are not opposed to use an alternatice test met...

View More


Description:

Thailand Analytical Chemistry Laboratory required for Surface detection of target elements by XPS/ESCA on technical/industrial material."

Requirements:

Confidentiality is mandatory

View More


Description:

Product Safety Testing Laboratory needed for CSA testing portable industrial oil-fired heater to get CSA certification. please tell how many heaters and ducuments we have to submit. also tell how much cost for it.

View More


Description:

USA-Gulf of Mexico Region Federal Regulations section 173.132 Preclinical Contract Research Organization required to do Toxicology Study - An LC50 for mist inhalation one hour. Animals: Young adult albino rats (male and female). More than 90% of particle...

Requirements:

The test must be suitable to address Code of Federal Regulations section 173.132 to determine whether a material meets the definition of

View More


Description:

Canada Soil Testing Laboratory needed to test three samples of industrial Hemp to see if they were grown in the same lot.

Requirements:

For legal pourposes.

View More


Description:

Eastern USA Materials Laboratory required for testing a pressure sensitive labeling material against the following Bosch Norm "N38A SQ1.2"
"N42AP-102" or "4-497-027-539" Salt Spray also known as DIN EN ISO 9227
"N42AP-213" or "4-497-026-677" Industrial ...

Requirements:

DIN

View More


Description:

USA Analytical Chemistry Laboratory needed for Thermogravimetry-FTIRmeasurement of free formaldehyde in an industrial H2S scavenging product.

View More


Description:

Canada Industrial Hygiene Laboratory needed for Blood and Urinalysis results for phosphates.

Requirements:

Standard compared to Alberta occupational exposure levels. Please provide quote on this analysis.

View More


Description:

Europe Microbiology Laboratory needed for EN 13697:2001 Chemical Disinfectant Testing

Requirements:

Testing according to:EN 13697: 2001Chemical disinfectants and antiseptics - Quantitative non-porous surface test for theevaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food,industrial, domestic and institutional are...

View More


Description:

US Physical Laboratory needed or UN Performance Testing: DOT 7A type A packaging 49 CFR 173.412, 173.415, 178.350 and industrial IP-3 49 CFR 173.411
Type IP-1 49CFR 173.410, 411(a) and (b)(1)

Requirements:

UN Performance test 49 cfr subpart M 178.600 - 608

View More


Description:

USA Industrial Hygiene Laboratory needed for wipe surface testing for progesterone, estradiol, and testosterone

Requirements:

Confidential /testing requirements are unknown at this time

View More


Description:

USA Industrial Hygiene Microbiology Laboratory needed for bacterial speciation (testing) for Andersen air plates using TSA agar and sterile transport swabs following a sanitary sewer incident.

Requirements:

as appropriate.

View More


Description:

Medical Facility needs Industrial Hygiene/ Environmental Laboratory for air testing for air and surface concentrations of two pharmaceutical compounds, fluorouracil and cyclophosphamide at a medical facility. If I sent air filters and wipe pads to you, c...

View More


Description:

Industrial Hygiene, Radiochemistry Laboratory needed for radioactivity testing of an old laboratory hood was used with tritium tagging for metabolites.

Requirements:

Wipe testing for tritium or any radioactivity.

View More


Description:

JIS A 1901 Materials Laboratory needed for a quote to run Japanese Industrial Standard JIS A 1901 and time to complete test and issue a report once samples arrive.

View More


Description:

Europe accredited Industrial Hygience laboratory required for all Industrial hygiene techniques, specifically VOC gas, vapour and dust monitoiring

Requirements:

Appropriate lab accreditation for their country, i.e. UKAS, ISO 9001 GLP, etc

View More


Description:

Asia NIOSH Industrial Hygiene Laboratory needed for testing Activated carbon face masks for NIOSH respirator evaluations, NaCl aerosol penitration and/or DOP filtration efficiency tests for our masks. Please contact me if your organization can fullfil our...

View More


Description:

Westcoast USA Industrial Hygiene Laboratory needed for testing - ie welding fumes, chromium vi, dust samples.

Requirements:

Do you provide a full array of industrial hygiene equipment, ie low flow pumps, hi flow, noise dosimeters, calibrators, etc

View More


Description:

Canada Industrial Hygiene Laboratory needed for polyethylene chemicals plant to do tests on swabs taken from around areas such as the lunch rooms for the maintenance workers to see if there are any traces of chemicals coming back from the work site on the...

View More


Description:

USA NIOSH Industrial Hygiene Laboratory needed to perform organotin analysis to NIOSH 5504.

Requirements:

NIOSH 5504

View More


Description:

Analytical Chemistry Laboratory needed for ASTM testing on industrial lubricants

View More


Description:

Panama Industrial Hygiene Laboratory needed for NIOSH 7400 testing for identificacion and quantity of glass fiber"

Requirements:

Aplication of the NIOSH 7400 for identificacion and quantity of glass fiber in air. Additional at this I need 10 cassete for sample with specification in NIOSH 7400

View More


Description:

CENTRAL AMERICA INDUSTRIAL HYGIENE LAB NEEDED FOR OCCUPATIONAL SAFETY & AIR QUALITY TESTING 7400 FOR SYNTHETIC VITREOUS FIBERS IN AIR IN A HIGH SCHOOL.30 SAMPLES"

Requirements:

CERTIFICATION

View More


Description:

Food Manufacturer needs Environmental/Industrial Hygiene Laboratory needed for Air Testing: Total Oil Mist in Air
Total Suspended particulate
Total Hydrocarbon

This will involve air filtration(respirable and non-respirable TSP and activated charcoal...

View More


Description:

NIOSH CENTRAL AMERICA INDUSTRIAL HYGIENE LABORATORY NEEDED FR SAMPLING AND ANALYZING BETWEEN 10-20 SAMPLES OF AIR, LOOKING FOR VITREOUS FIBERS IN A HIGH SCHOOL. NIOSH 7400.

QUOTATION HAVE TO INCLUDE SAMPLING IN PANAMA AND LAB ANALYSIS."

Requirements:

LAB HAVE TO BE CERTIFIED.

View More


Description:

GLP Toxicology Lab needed for ames mutagenicity test
, ER and HRR deficient saccharomyces cerevisiae

on a variety of industrial products

Requirements:

GLP

View More


Description:

Industrial Hygiene Lab needed for NIOSH Testing: Crystalline silica (filter analysis deposition) by XRD. Method NIOSH 7500.

Requirements:

The laboratory must be certified for the above mentioned method.

View More


Description:

Environmental Industrial Hygiene lab needed for determing Personnel exposure levels. Require GS results for Cyclophosphadine attained by air
sampling through Anasorb 708 media.

View More


Description:

EXTREMELY CONFIDENTIAL: Industrial Hygiene Lab needed for collecting samples of plant air looking for sulfuric acid , Zinc, iron and chlorides.
Also there is orange deposits on the walls which need to be analysis for the above.

Requirements:

The testing is to determine air quality and are being done in a galvanizing plant where sulfuric acid pickling tanks are present. The company that is have the testing done wants all results to be confidential.

View More


Description:

Environmental Industrial Hygiene laboratory needed for testing for Bisphenol A, maleic anhydride, phthalic anhydride, isophthalic anhydride in Chemical dust

Requirements:

any test method

View More


Description:

Mechanical laboratory needed for testing a full body harness to Personal Protective Product Directive. Body Harness distributes fall forces throughout the body which substantially reduces the chance of injury. Directive for Personal Protective Equipment. ...

Requirements:

EN361(02)EN358(00)EN813(97)

View More


Description:

Mechanical lab needed for testing a full body harness to Personal Protective Product Directive. Body Harness distributes fall forces throughout the body which substantially reduces the chance of injury. Directive for Personal Protective Equipment. Safet...

Requirements:

89/686/EEC, this is the one that I know of.

View More


Description:

Acoustics laboratory needed for industrial and marine fan noise and vibration characteristics

Requirements:

ISO

View More


Description:

Analytical Chemistry laboratory needed for an IPA analysis of Industrial Hygiene air and swab samples

Requirements:

To Be Determined

View More


Description:

Analytical Chemistry laboratory needed to test environmentally friendly, no-hazardous industrial cleaners. One of the products is a water based degreaser. The product is certified by the USDA/NSF as acceptable for use as a general cleaner on all surfaces ...

Requirements:

Acceptable by Federal Health authorities

View More


Description:

Textiles laboratory needed for testing High Temperature Fabrics to meet ANSI Z136.1 standards

Requirements:

ANSI Z136.1 laser barriers providing protection from laser beams and scattered laser radiation for personnel in industrial, medical, research.

View More


Description:

Industrial Hygiene Environmental laboratory needed for ASTM testing: air sampling for Ba - individual monitoring for exposure to Ba during a testing procedure.

Requirements:

Meet ASTM limits

View More


Description:

Analytical chemistry laboratory needed to test the Volatile Sulfur Compounds in industrial alcohol (96%EtOH).
Use of chemiluminescence detector
on GC

View More


Description:

Analytical chemistry laboratory needed for Industrial Hygiene/risk assesment mainly on:
Airborne chemical substance (VOC,PNA, Benzene..), Dust, Indoor air quality, Noise exposure,Bioaerosol, Ergonomics.

Requirements:

EN, ISO, ASTM, OSHA, NIOSH,...

View More


Description:

Product Safety testing laboratory required to perform impact test, penetration test, flame resistance test on industrial helmet according to ANSI Z89.1

Requirements:

ANSI Z89.1

View More


Description:

Occupational Health Laboratory needed for Industrial Hygiene testing

View More


Description:

Industrial Hygiene Laboratory needed for swab or imersion testing to detect cefdinir on coveralls has residue of cefdinir or cephalosporin on its surface after a washing process.

Requirements:

To be testes by an Industrial Hygiene laboratory

View More


Description:

Electrical laboratory needed for testing industrial robot cover to Japanese Standards.

View More


Description:

FDA GMP industrial hygiene laboratory needed for testing to characterize ultrafine particles in an air stream generated by a medical device.

Requirements:

FDA

View More


Description:

Analytical Chemistry Laboratory needed for testing Total nitrosamine content of an aqueous solutions containing 5-10% nitrate, 3-6% methyldiethanolamine (industrial grade) or tetrahydroxyethyl ethylenediamine, organic salts and thiocyante salts.

Requirements:

company name and contact information to remain confidential.

View More


Description:

Toxicology laboratory needed for Chromosome Aberrations Testing, Ames testing of chemicals for industrial use.

Requirements:

Confidential

View More


Description:

Clinical Industrial Hygiene Laboratory needed for NIOSH Testing (NIOAH 0900) for airborne TB

Requirements:

NIOSH/ company to remain confidential

View More


Description:

Chemical company needes ISO certified or AIHA accredited Industrial Hygiene Laboratory for samples analysis

Requirements:

ISO certified or AIHA accredited or equivalent

View More


Description:

Analytical Chemistry Laboratory needed for Identification Testing of Ingredients in industrial hand cleaner product.

Requirements:

wishes our contact information to remain Confidential.

View More


Description:

Analytical chemistry laboratory needed for Mass Spectroscopy Testing composition of an industrial urea sample.

View More


Description:

Industrial Hygiene laboratory needed for Mercury Analysis by Cold-Vapor Atomic Absorption Spectroscopy (CVAAS) testing of blood and urine

Requirements:

CVAAS

View More


Description:

Manufacturer needs OSHA compliant industrial hygiene laboratory to perform it's hearing and vision tests

Requirements:

osha compliant

View More


Description:

ISO environmental industrial hygiene laboratory neded for testing Particulate Matter at AHO outlet and near the stack. The boiler has come into operation since 2 - 3 weeks back and we have started dosing our catalyst.
 
We will be waiting for your resp...

Requirements:

ISO or which ever is acceptable.

View More


Description:

AIHA analytical chemistry laboratory needed for Cobalt testing OSHA ID-213 analysis of 10 Industrial Hygiene samples on 37 mm cellulose filters.

Requirements:

OSHA ID-213Lab should be AIHA acredited.

View More


Description:

Manufacturer needs industrial hygiene environmental laboratory for air sampling testing. Materials manufactured are explosives.

View More


Description:

OSHA Industrial Hygiene laboratory needed for testing air samples and analyzing for maleic anhydride and phthalic anhydride

Requirements:

Analysis by OSHA methods 86 and 90

View More


Description:

Phenol testing in industrial cleaner

View More


Description:

Industrial Hygiene lab needed for analysis of chemical dust.

View More