NEED LABORATORIES OR LAB SUPPLIERS?

ARE YOU A LABORATORY OR LAB SUPPLIER?

SUPPORT

Questions / Comments?
Call 1-855-377-6821or

Laboratory Test Requests

Most Recent electrical Laboratory Test Requests

Submit electrical Laboratory Requests

Contract Laboratory has received the following electrical Laboratory Test Requests which need to be fulfilled! These electrical Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their electrical Laboratory Test and Scientific Research. If you need a electrical Laboratory, please Submit a electrical Laboratory Test Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

IEC High Voltage Detector Testing

Electrical Laboratory needed for IEC high voltage detector testing based on IEC61243-1 Live working - Voltage detectors - Part 1: Capacitive type to b... View More

Cured Rubber Electrical Properties

Materials Laboratory needed for ASTM Testing to determine the electrical properties of cured rubber to ASTM D 991, D 257 Standard Test Methods for DC ... View More

FDD Declaration of Conformity for New Consumer Wireless Device

Electrical Laboratory needed for pre-scan and testing for FCC Declaration of Conformity for a new consumer wireless electronic device.connected in ra... View More

ASTM Lamination

USA Industrial Laboratory needed for ASTM testing of metal stator laminations tested to ASTM A677 Standard Specification for Nonoriented Electrical St... View More

UL / CSA Marine Onboard Battery Charger Evaluation

Electrical Laboratory needed for UL and CSA Testing of marine onboard battery charger to UL 1236 Standard for Battery Chargers for Charging Engine-Sta... View More

IEC Electromagnetic compatibility (EMC) testing

Italy or Europe NATA Electrical Testing Laboratory with mutual recognition agreement in place for RCM Mark and IEC EMC testing to IEC61000-6-2 and IE... View More

GSA FIPS 201 Evaluation

Electrical Laboratory needed for GSA FIPS 201 Evaluation of Electromagnetically Opaque Sleeve

View More

Volkswagon Automotive Electrical Load Testing

Automotive Laboratory needed for automotive electronics following VW80000 standard Automotive Standards for Electrical Load testing. View More

IEC Lighting Ballast Label Durability

Accredited Electrical Laboratory needed for IEC lighting ballast label durability test in accordance with §7.2 of IEC 61347-1 (2015 ed.) Standard Lamp... View More

UL Electrical Signage Testing

Electrical Laboratory needed for electrical signage testing (UL 48 Standard for Electric Signs or UL1598
Commercial Lighting Fixtures ) View More

IEC Lightning Protection System Components Evaluation

Electrical Laboratory needed for IEC Evaluation of Lightning protection system components (LPSC) to IEC 62561-7 Requirements for earthing enhancing co... View More

Infrared Incandescent Bulb Performance Evaluation

Retailer need Electrical Laboratory for performance evaluation of infrared incandescent bulbs with a series of confirmatory specification tests done ... View More

IEEE Substation Grounding Qualification

Electrical Laboratory needed for total IEEE Testing to IEEE 837-2014 IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding View More

IEC Partial Discharge Testing

Electrical Laboratory needed for IEC partial discharge testing of electronic component optocouplers to IEC 60747-5-5 Semiconductor devices - Discrete ... View More

Integrated Circuit Authenticity

Large Corporation needs Electrical Laboratory for authenticity testing of Integrated circuits to determine they are not counterfeit or refurbished p... View More

UL DC short circuit test

Large Industrial Company needs Electrical Laboratory for UL DC short circuit testing at 1500VDC View More

IEC Garment High Voltage Environment Testing

Electrical Laboratory needed for IEC testing for garment use in high voltage environment according to 60895 © IEC:2002 numeral 6. View More

HALT / HASS Testing

Technology Company needs Electrical Laboratory for Highly Accelerated Stress Screening HASS / Highly Accelerate Life Test HALT HALT Testing of elect... View More

IEC Design Testing of High Voltage Equipment

Electrical Laboratory needed for IEC design testing to IEC61109 of High Voltage Equipment insulators
View More

SAE Certification

Electrical Laboratory needed for SAE Certification testing to certify telematics products to SAE J1113 Electromagnetic Compatibility Measurement Proce... View More

Copper Cathode Safety Testing

Power company needs electrical laboratory for electrical safety testing of 300MT of copper cathode. View More

IEC surge immunity testing

Large Electrical Company needs Electrical Laboratory for IEC surge immunity testing to IEC 61000-4-5 with test levels of at least 8kV and output imped... View More

Certification of On-Grid Solar Inverter

Electrical Laboratory needed for EN and IEC certification testing of on-grid solar inverter to the following specifications


1. IEC62109-1; IEC621... View More

Corrosion Testing

URGENT ISO certified Laboratory needed for IEC corrosion testing for electrical components according to the following conditions
1. H2S accordi... View More

SAE Fuel Tank Systems Testing

Electrical laboratory needed for SAE charge accumulation and dissipation testing according to SAE J1645, Fuel Systems and Components - Electrostatic C... View More

CPSIA, California Prop 65, ASTM Toy Safety

Consumer Products Laboratory needed for CPSIA, California Prop65 and ASTM testing of children's robotic toys ASTM F963 full test( Part1, Part2, Part3)... View More

Insulator Specification Compliance

URGENT Electrical Laboratory needed for compliance certification of insulator with customers insulator technical specifications that can be provided.R... View More

IEC 60855 and IEC 62193 Testing

Large Corporation needs Electrical Laboratory for certification of IEC 60855 Live working - Insulating foam-filled tubes and solid rods & IEC 62193 ... View More

IEC Compliance of Medical Electrical Equipment

Electrical Laboratory needed for IEC compliance testing to IEC 60601-2-47 Medical electrical equipment - Part 2-47: Particular requirements for the ba... View More

Building Materials Standards Testing

Materials Laboratory needed for plastics testing.
1. NFP 92 503 Electrical burner test used for flexible materials thickness no more than 5mm
2. NF... View More

Airbus Leakage Current Testing

Electrical Laboratory that specializes in Airbus Testing needed for Leakage Current Testing as per X2520RP0504375 Issue 1 for Airbus. View More

Transformer Certification Testing

Internationally Recognized Independent Electrical Laboratory needed for certification testing of many transformers starting from 50 KVA up to 2500 KVA... View More

Large Power Company needs laboratory for pH and electrical conductivity testing on crushed sand. View More

Automotive Laboratory needed for electrical testing and possible development of a product that connect to a van sliding door and when the door is clos... View More

Large Corporation needs experienced Electrical Laboratory needed for IEC Testing for Corona and Radio Interference Voltage (RIV) and heat Cycle testi... View More

Electrical Laboratory needed for circuit breakers testing for time-current curve characteristics View More

Oil Laboratory needed for electrical conductivity of a liquid chemical hydrocarbon mixture in accordance with ASTM D4308 Standard Test Method for Elec... View More

Electrical Certification Laboratory needed for electrical certification testing of various telecommunication devices
including BT/Wi-Fi Transmitter... View More

Electrical Laboratory needed for IEC testing of a linear accelerator according to IEC6060-2-1 & IEC60976 that use to radiotherapy and another produce ... View More

Electrical Laboratory needed for resistivity testing of pellets including impedance vs frequency data for nuiquist plots
dc current voltage chracteri... View More

Automotive Laboratory needed for emissions and crash testing of hybrid and electric car. Other testing maybe required as well. View More

Electrical Laboratory needed that is accredited to test in accordance to IEC 62287-1 Maritime navigation and radiocommunication equipment and systems ... View More

Electrical Laboratory needed for fir safety of electrical radiant heating systems and its ability to start a fire when installed in domestic or Comme... View More

Electrical Laboratory needed for IEC Testing to 2 IEC Standards: IEC 62132-2 Integrated circuits - Measurement of electromagnetic immunity - Part 2: M... View More

URGENT Electrical Laboratory needed for UL power and control cable testing for arcing resistance performance to UL Garage Spec 201 Sec 77 Cable Arcing... View More

Electrical Certification Laboratory needed for NFPA certification testing of lineman's gloves to NFPA 70E, Standard for Electrical Safety in the Workp... View More

Electrical Laboratory needed for ASTM of gloves as per ATSM D120 Electrical Insulating Gloves including Validation of product to meet the requirements... View More

Electrical Laboratory needed for ASTM Testing of safety protection gloves to ASTM F2675 Standard Test Method for Determining Arc Ratings of Hand Prote... View More

Electronics Manufacturer needs electrical certification laboratory for EMC Testing of cabling to CE102 - Power Leads (10 kHz to 10 MHz) View More

Steel manufacturer needs metallurgical Laboratory for color-coated galvanised steel testing including mechanical, thermal (expansion coefficient, vapo... View More

Electrical laboratory needed for SAE testing to SAE J560, Primary and Auxiliary Seven Conductor Electrical Connector for Truck-Trailer Jumper Cable View More

Electrical laboratory needed for UL 1072 dry dielectric test View More

Electrical laboratory needed for SAE charge accumulation and dissipation testing for rubber hose with flowing fuel substitute fluid according to SAE16... View More

Electrical laboratory needed with the capability for testing specialized circuit breakers at 600VDC, 16kA, 50ms duration. Inductance <30uH, 50uH, 100... View More

Laboratory needed for ultrasonic sensor testing to standard EN 14236 Ultrasonic domestic gas meters. This kind of test involve the characterization ... View More

Automotive laboratory needed to test the performance of brushless motor by comparing the mechanical power output of the machine with the electrical in... View More

Electrical laboratory needed for IEC testing to the following 6 IEC Standards: IEC 61000-4-9,Electromagnetic compatibility (EMC) , IEC 60529 Degrees o... View More

Electrical laboratory needed for IEC testing of mechanical cable lugs to IEC 61238, Compression and mechanical connectors for power cables for rated v... View More

Electrical laboratory needed for thermal cycling test for electronic boards, about 5 x 10 cm in size View More

LONG-TERM TESTING Electrical laboratory needed for compliance testing of electrical grounding rods and accessories as per IEC 62561 standards, Lightni... View More

Electrical certification laboratory needed for Electromagnetic Compatibility EMC testing for the following
Coffee maker
grill
blender
kettle
fo... View More

Medical electrical laboratory needed for IEC testing of sterile electrosurgical products to IEC 60601-1, Medical electrical equipment - Part 1: Gener... View More

Materials laboratory needed for UV resistance testing in HDPE Corrugated Flexible Pipe used as an electrical conduit View More

LONG-TERM TESTING Large corporation needs electrical laboratory for multiple electrical tests on refrigerator system (domestic and commercial). View More

Telecommunications test house needed for UWB radio transmitter testing to measure the power and spectrum to EN 302065 Electromagnetic compatibility an... View More

Electrical laboratory needed for UL certification testing of centrifuges with two motors prior to shipment to Canada. View More

Power company needs electrical laboratory for IP ingress protection IP69K testing. View More

Electrical laboratory needed for BS testing of railway cable insulator to BS EN 62621:2016+A1, Railway applications. Fixed installations. Electric tra... View More

Electrical laboratory needed for comparison study of two light products for distribution of light, light intensity, and energy output. View More

Electrical laboratory needed for MIL-STD electromagnetic and electrostatic testing of ten cable assemblies View More

Acoustics laboratory needed fo racoustics testing of consumer electronics audio products for SPL, distortions, frequency graphs, power graphs, electr... View More

Medical Device laboratory needed for passive ligating clip medical implant testing to several ISO and IEC standards including:

F2052 Test Method fo... View More

Electrical laboratory needed for IEC testing of ladder cable tray under IEC to EN 61537:2001 Cable tray systems and cable ladder systems for cable man... View More

ISO laboratory for full electrical testing of LED , street lights and flood lights . View More

LONG-TERM TESTING Large UK consulting firm needs geological laboratory for monthly geotechnical soil tests including: sulphate reducing bacteria/redu... View More

NABL Electrical laboratory needed for IEC electrical continuity testing as per IEC 61537 cable management - cable tray systems and cable ladder system... View More

Electrical laboratory needed for AITM testing of wires /cables 1) AITM 2.0008A Smoke Density Electrical Wire/Cable for Power Supply, 2) AITM 2.0008B S... View More

NABL electrical laboratory needed for IEC testing of cable tray as per IEC 61537 Standard: Cable Management - Cable Tray Systems and Cable Ladder Sys... View More

Electrical laboratory needed for IEC testing of transformers to IEC 61869-1, Instrument transformers and IEC 61869-2, Instrument transformers - Part ... View More

Importer needs electrical laboratory for certification testing of 3 x 5 coated cable. View More

Laboratory needed for waterproof testing of medical alert device to International Electrotechnical Commission (IEC) IP code rating IPX6. View More

Electrical laboratory needed for cable testing as per IEC 61537, Cable management - Cable tray systems and cable ladder systems
View More

Electrical laboratory needed for ionic cleanliness testing of electronic component as per IPC-TM-650, method 2.3.28, Ionic Analysis of Circuit Boards... View More

FDA GLP and EPA Industrial Hygiene laboratory needed for antimicrobial efficacy testing of a organo-silane antimicrobial agent against a variety of vi... View More

Laboratory needed for IEC environmental simulation testing of electrical enclosures including corrosion tests in artificial atmospheres and salt spray... View More

Materials laboratory needed for IEC testing of adhesive tapes to IEC 60454 (pressure-sensitive adhesive tapes for electrical purposes) including tensi... View More

Electrical laboratory needed for IEC testing of electronics to IEC 60730-1: Automatic Electrical Controls for Household and Similar Use View More

Oil laboratory needed to provide certification of dielectrical insulating transformer oil to US standards. View More

LONG-TERM TESTING Electrical laboratory needed for IEC testing of electrical connectors as per IEC 61238 for current cycle View More

University researcher needs physical laboratory for doppler radar vibration measurement of sensor, receiver and software to model the receiving data a... View More

Electrical laboratory needed for inductor testing to AC + DC load life testing of three production lots

1 3 separate lots of 77pcs each
2 Chambe... View More

LONG-TERM TESTING Lighting manufacturer needs physical laboratory for SAE and NFPA certification testing of LED lighting products to SAE J595, SAE J8... View More

Large technology company needs electrical laboratory needed for IEC fire testing of dry transformer to IEC 60076-11 F1 Fire Resistance View More

Large lighting company needs electrical laboratory for high voltage (10-12 kV) electrical fast transient testing. View More

Electrical laboratory needed for ASTM testing of U-PVC cable ducts for shore hardness (type D) to ASTM D 2240, coeffecient of linear thermal expansion... View More

Pharmaceutical analytical chemistry laboratory needed for USP testing to USP 30 Monograph for Dextromethorphan HBr; specific rotation <781S> of Dextro... View More

Electrical laboratory needed for electrical certification and acceptance testing of transformers, arresters, and switches including current transforme... View More

Electrical laboratory needed for IEC transformer testing of 72.5KV/145KV current transformer and voltage transformer according to IEC standard at a f... View More

Analytical chemistry laboratory needed for water testing for electrical conductivity, pH, total dissolved solids, total suspended solids, and trace mi... View More

Oil Laboratory needed for ASTM testing of dielectric mineral oil to ASTM D 3487-09 Specification for Mineral Insulating Oil Used in Electrical Apparat... View More

Contract laboratory needed for accelerated product life testing on turnkey automation and lighting solutions used in hospitality industry. View More

Laboratory equipment calibration and electrical safety maintenance testing. View More

Electrical laboratory needed for SAE external ignition testing of small marine electrical equipment for use in the marine industry to SAE J1171, Exter... View More

Electrical certification laboratory needed for SAE external ignition protection testing of a small electrical device for use in marine equipment to SA... View More

Electrical laboratory needed for IEC radio frequency testing of semi-rigid coaxial communication cables per IEC 61196 Standard View More

Electrical laboratory needed for functional testing of integrated circuits after reballing. View More

UL certification electrical laboratory needed for UL 61010 electrical safety testing of a boiler room apparatus. View More

Conduit AMS Pvc Pipe Class-3 6 Meters Electrical test certificate View More

Telecommunication laboratory needed for radiated disturbance testing for BSMI certification of an instrument cluster complying with CNS 13438/13439. View More

Large industrial technology company needs electrical laboratory for IEC electrical performance and EMC testing of electrical substation relay to IEC 6... View More

Consumer products safety laboratory needed for European compliance testing of a plastic eating utensil to ensure the product does not impose a fire, e... View More

Automotive laboratory needed for SAE J1455 (electronic) compliance testing including EMC on two automotive air-pressure gauges. View More

Telecommunications testing facility needed for near-field communication NFC standards testing of aerial cable fittings including insulated piercing co... View More

Electrical communications laboratory needed for IEC 61537 Cl. 10.2-10.8 testing of cable tray and ladder systems with respect to the following:

1. ... View More

ON-SITE TESTING Electrical laboratory needed for voltage electrical safety testing. General Low Voltage below 70 Volts DC testing for the Safety of a ... View More

Electrical wiring laboratory needed for the following testing:

EPR insulation under ASTM D1149 with an ozone concentration 250 ppm through 168 hrs.... View More

Large cabling company needs a laboratory for fire resistance cable testing to BS 6387 Cat C W & Z.

1) Copper conductor, Mica tape, XLPE insulation... View More

LONG-TERM TESTING Manufacturer needs Aerospace laboratory for FAA Testing of air field lighting transformers. View More

Aviation laboratory needed for RTCA DO-160 testing.
View More

Personal protective equipment laboratory needed for ASTM F2675 Arc Flash testing of a protective glove. Quote needed. View More

Electrical and lighting laboratory needed for ASTM-D 5470, ASTM E1461, MET 5.4-01-40000, IEC 61189-3-913:2016 thermal conductivity testing for both of... View More

Geo-electrical laboratory needed for testing of ground enhancing materials according to IEC 62561-7:

1. Leaching test - Based on EN12457 - 2 Part ... View More

Metallurgical laboratory needed for chemical composition testing of a magnesium in-ground anode per ASTM B954-15 and meeting the specification require... View More

Large corporation needs electrical laboratory for IEEE testing of of P54x differential relays to determine IEEE C37.94-2002 compliance using jitter an... View More

Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to ... View More

Electrical laboratory needed for lightning protection and corrosion testing of 5 kilograms of a liquid and solid. View More

Automotive laboratory needed for SAE testing of a device and components to SAE J575, Test Methods and Equipment for Lighting Devices for Use on Vehic... View More

Physical laboratory needed for EN electrical wiring testing to
High temperature exposure EN 6059-302
Fluid Resistance EN 6059-303
Fluid absorption ... View More

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching tes... View More

ISO Electrical laboratory needed for BS certification of EN 60335/2-96 certified testing of a heating element.

View More

Electrical laboratory needed for ANSI and IEC Testing: combination wave surge testing and 100 KHz EFT testing according to IEC61000-4-5 and IEC61000-... View More

Electrical laboratory needed for full scale testing of a LED light panel. View More

Electrical laboratory needed for load testing in accordance with IEC 62561-5, Clause 5.2.2 Lightning protection system components (LPSC) - Part 5: Req... View More

Electrical laboratory needed for load testing in accordance with EC62561-5 Clause 5.2.2.

View More

Electrical laboratory needed for testing 6 samples in accordance with IEC62561-2 Clause 5.4.2.
View More

Electrical laboratory needed for testing 117 samples in accordance with clause 6.3 of IEC 62561-1.

View More

ANSI electrical laboratory needed for surge testing and certification of surge protective devices as per ANSI C 136.2 2014. View More

LONG TERM TESTING. Electrical laboratory for AHAM Refrigerator Testing: Mechanical Pull-down, Continuous operation, conservation, energy cosnumption a... View More

Physical Environmental Laboratory needed with anechoic chamber for 3D antenna pattern measurements of a small unit (40 mm square) at 923.5MHz and 157... View More

Large electronics company needs electrical laboratory for IEC Testing: cable tray testing as per IEC 61537 View More

Electrical Laboratory needed for Ingress Protection IP69K testing for an electric motor for food industry View More

FDA GMP medical device laboratory needed for preclinical product safety testing: biocompatibility (10993) sensitization, cytotoxicity, irritation and... View More

Cable tie company in India needs laboratory to verify compliance with ICE 62275 standard. View More

Certification laboratory needed for BSMI certification testing of networking equipment. Please advise on 1.cost 2. lead time 3. what document we nee... View More

Test laboratory needed for SAE J1939-11 Table 7 cable tests for data cables (20 AWG). impedance and resistance, measurement of cables and shield effec... View More

ISO 17025 laboratory needed for electrical safety testing to Polyvinyl Chloride PVC skirting/Dado Trunking according to BS EN 50085Cable trunking syst... View More

Lighting manufacturer needs testing of LED light fixture to certifiy that it meets cleanroom ISO-5 and also biosafety levels 1 and 2. View More

Long Term Testing: Lighting performance testing needed for LED T8 tubes to assure conformance with standards published by the manufacturer for their p... View More

FDA compliant laboratory needed for FDA compliance and performance testing of nebulizer for working frequency, nebulization rate, particle size, oper... View More

Electrical Laboratory needed for CE Mark Testing for Cables and Wires to .H05VVH2-F
- H05VVH2-U
- H05VV-F (TTR)
- NYM
- YAVV (NAYY)
- YVV (NYY... View More

Manufacturer needs electrical laboratory for IEC Testing of Welding machine test per tto IEC 60971-1, Semiconductor convertors. Identification code ... View More

Computer Hardware company needs certification laboratory for ETSI certification testing an e-CALL modem according to multiple ETSI standards includin... View More

Manufacturer needs laboratory for new product development testing of new coating to be used in the abatement of surfaces that contain lead based paint... View More

Electrical laboratory needed for IEC certification testing for electrode holder, cable connector, and work clamp under IEC 60974, Arc welding equipmen... View More

Third-party testing laboratory needed for Ethernet cables (CAT6 and CAT6A) used in networking View More

Industrial Third-Party ISO 17025 Laboratory needed for IEEE, ANSI and UL Testing of 9 cables flammability and toxicity testing: FT4/IEE1202 flame pro... View More

Automotive testing for back up lighting: SAE J593 View More

Electrical lab needed for: product safety requirements testing for equipment for electrical energy measurement and control. IEC and ANSI standards View More

Third-party testing laboratory needed for Ethernet cables (CAT6 and CAT6A) used in networking View More

Laboratory needed for SAE Testing to SAE J1684, Test Method for Evaluating the Electrochemical Resistance of Coolant System Hoses and Materials View More

Pharmaceutical analytical chemistry laboratory needed for USP 30 Monograph testing of Dextromethorphan HBR; Specific rotation <781S> of Dextromethorph... View More

Electrical laboratory needed for Dielectric testing of phone accessories between 800 mhz and 4 ghz View More

Laboratory needed for Slow bend test needed of train rails welded with electric flash butt welder 500lb or less. 136lb rail is the largest.. 125K ps... View More

Electrical Laboratory needed for conformance testing of automotive spark plug cables:
ISO 3808 (or SAE J2031) for Spark Plug Cable. ISO 3808 or SE... View More

Electrical laboratory needed for electrical testing on new medical device prototype:
1.Ground Continuity test
2. High voltage test
3. Insulation Re... View More

Electrical laboratory needed for protoype testing: potable water testing of energy consumption and water delta, flow rates and energy of volts, amps... View More

Materials laboratory needed for IEC and ASTM Testing of insulators (several tests) : ASTM C177: Standard test method for steady-state heat flux measur... View More

Electrical laboratory needed for SAE Testing to SAE J1292, Automobile and Motor Coach Wiring View More

Electrical laboratory needed for DIN Testing of a group of sensors as per DIN 40050-9 (IPX9K), Road vehicles; degrees of protection (IP-code); protect... View More

Electrical laboratory needed for Flow versus differential temperature comparison study as fuel passes a chamber with an electric heater. View More

Electrical laboratory needed for the Determination of Dielectric Permittivity and Loss tangent of Photoresist materials. Frequency range is 1 GHz to 4... View More

Electrical laboratory needed for bulk electrical resistivity testing of a 2 x 2 x .030 fired ceramic specimen from room temperature up to 1000C. Pref... View More

Europe electrical laboratory needed for IEC tests on fibreoptic cables according to IEC IEC 60793-xx and 60794-xx standards: Testing fibreoptic cable... View More

Nanotechnology company needs materials laboratory for conducting studies on nanoparticles effect on the base polymers. polymer composite testing on va... View More

Electrical laboratory needed for static electricity testing for carpet tile to AATCC-134. The requirement is antistatic less than 3.58kV permanent con... View More

Electrical laboratory needed for FCC Part 15 certification testing
View More

Contract Medical Device Laboratory needed to perform testing on Disposable Blood Pressure Transducers in accordance to ANSI/AAMI BP22. View More

Electrical laboratory needed for DOE Testing of beverage coolers tested for DOE 2017 requirements, NSF 7, Energy Star 4.0 and others View More

ELECTRICAL LABORATORY NEEDED FOR ANSI TESTING OF PHOTOCELL AND RECEPTACLE TO ANSI C136.10

LED STREETLIGHT ANSI C136.31 VIBRATION TESTING. View More

Large corporation needs electrical laboratory for Ingress Protection Testing of environmentally sealed toggle switch is capable of complying with Ing... View More

Electrical Laboratory needed for IEC Testing to IEC60855-1, Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-... View More

Electronics laboratory needed for conformance testing of new cctv camera testing to Government of India parameters View More

Laboratory needed for Industry standards and safety testing for a piece of exercise equipment. No digital or electrical component to meet government a... View More

Electrical Laboratory needed for battery testing for charges of following test as per IS 1651, Stationary cells and batteries, lead-acid type (with t... View More

Shipping company needs laboratory for hose bend testing of 6 hoses that need doing bending test according to EN1765 standard. Electrically discontinuo... View More

Electrical Laboratory needed for EMC Testing to DO 160 Environmental Conditions and Test Procedures for Airborne Equipment for aviation products. View More

Electrical certification laboratory needed for FCC conformance testing on transportation systems. Please provide quote View More

Electrical Laboratory needed for IEC Testing to International Electrotechnical Commission
IEC 60855-1, Insulating foam-filled tubes and solid rods -... View More

ISO certified Medical Device Laboratory needed for Bio feedback system testing to 60601 CB Scheme. Possible FCC (and equivalent for EU, Japan, Brazil) View More

India Manufacturing Company needs metallurgical laboratory for silver alloy electrical contacts testing: detailed mineralogical analysis of industrial... View More

ISO 17025 accredited electrical laboratory needed for qualification testing of Medium Voltage Cables rated 5- through 46kV per AEIC CS8, Section 15 fo... View More

Europe laboratories needed for electronic waste testing to determine metal content (Cu, Au, Ag, Pd, etc) in diverse electronical wastes eg. printed ci... View More

Electrical laboratory needed for Harmonic generation testing of variable frequency drive View More

UL, ETL, or NRTL recognized laboratory needed for certification testing of Domestic Storage Water Heaters (3 models) for export in US & Canada market ... View More

Electrical Laboratory needed for IP attestation conformity testing on our Electrical Panels as per IEC 61439-1 kindly elaborate the procedure, test ... View More

Electrical laboratory needed for Corrosion Resistance / Tensile Strength Testing (NIJ 0307.01) on 13 Samples x Metallic Handcuffs (technical specs pro... View More

Electrical Laboratory needed for Performance Testing / LED Testing on 05 Samples x Flashlights 0 (technical specs provided upon request).
View More

Electrical laboratory needed for Insulated Piercing Connector (IPC) testing to NFC33020 & NFC33004 View More

Electrical laboratory needed for Ingress Protection Testing: IP tests for an outdoor enclosure
View More

URGENT Engineering company needs laboratory for solar system testing.
View More

Electrical Laboratory needed for Diagnostic Medical X-Ray equipment testing: Insulation Resistance test before & after Humidity condition as per BIS ... View More

Accredited laboratory needed for electrical paperboard testing for compliance for type B3.1A of IEC 60641-3, Standard | Pressboard and presspaper for... View More

Electrical Laboratory needed for IEC Testing for Aluminium and nylon Cable Cleats as per attached specs IEC 61914:2009 (Old BS EN 50368) Cable Cleats... View More

Electrical company needs Laboratory needed that can certify that material shipments are checked for gamma radiation using a Ludlum model 19 Micro-R Me... View More

Electrical laboratory needed for quality testing and certification of electromagnetic and ultrasonic insect/mosquito repellant technology. View More

Electrical laboratory needed for failure investigation testing for lightning cable to specific problem (or problems) with a defective 8-pin lightning... View More

Electrical Home appliance manufacturer needs Microbiology Laboratory for antimicrobial efficacy testing of UV-light on sterilization.
1. Textiles in... View More

ELECTRICAL LABORATORY NEEDED FOR EN AND ANSI BASE PHOTOCELL TESTING (RECEPTACLE) TO ANSI C136.10: 2006 AND NTC 2470, Contact endurance test, Material ... View More

Electrical Laboratory needed for Compact Fluorescent Lights (CFL) and Tube Fluorescent Lights (TFL) Testing for Hg - Mercury weight measurements View More

ELECTRICAL CERTIFICATION LABORATORY NEEDED FOR POWER GENERATOR TESTING: EMISSION TEST, INPUT/OUTPUT TEST (WATTS - 50KVA), TORQUE/HP TESTCERTIFICATION ... View More

Electrical Laboratory needed for IES Testing of LED Light fittings to Illuminating Engineering Society
of North America (IES), LM79 Approved Metho... View More

Electrical Laboratory needed for UL Testing to UL489 Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit- Breaker Enclosures. and UL1077 S... View More

Appliance company needs third-party laboratory for comparison studies: Comparative Counter top / Toaster Oven Testing
View More

Analytical chemistry laboratory needed for ASTM Testing of Nucleating agents, analyzed for Volume (Electrical) Resistivity according to ASTM D257-93,... View More

Electrical certification laboratory needed for LED Testing for Certificate for CGT FLAT (LED Light Flat tube)
Length: 1 meter
1) Lumen Test (4PI)
... View More

Electrical laboratory needed for ASTM shock pulse testing : 100 vertical half sine 10G, 11 msec shock pulses on a 6' x 4' crate weighing 2000 lb View More

Performance laboratory needed for endurance testing for a 6 MVA transformer according to EN 50464-4, Three-phase oil-immersed distribution transformer... View More

Laboratory needed for National Electrical Manufacturers Association NEMA testing two LED modules to the 2005 NEMA TS 4, section 5, Display properties... View More

Automotive laboratory needed for ASTM Testing and testing to norm MS211-47 Type A2 (KIA/HIUNDAI):
ASTM D792, Standard Test Methods for Density and S... View More

FDA Electrical medical device laboratory needed for Skin massager testing:
2. FDA Product Code : PBX
3. Performance test standard
? IEC 60601-1: M... View More

ILAC certified laboratory needed to perform testing of instruments and systems against IEC 60601-1-2, Medical electrical equipment - Part 1-2: Gen... View More

Large Engineering company needs Electrical Laboratory for Harmonics test View More

FDA cGMP qualified laboratory needed to outsource specific rotation testing determined photoelectrically at 325 nm, for one of our Active Pharmaceut... View More

URGENT Materials laboratory needed for physical and microbiology ASTM testing of tape bituminous wrapping tape used in petroleum pipelines
Property ... View More

ILAC Mutual Recognition Signatory Laboratory needed for Electrical ageing testing for insulation piercing connector for LV arial bundle cables as per... View More

Asia electrical laboratory needed for capacitor powder testing UFL-451 20Kg to test. .Please provide quote View More

Large oil company needs electrical laboratory for electrical compliance inspections. At our facility we use hot sticks, release hooks, and other equip... View More

ISO 17025 Automotive laboratory needed for all Automotive charger testing such as EMC conformance, vibration, dimensional,
View More

Electrical labroatory needed for testing and charges of Three phase Grid Tie Inverters ranging from 1, 2, 5, 10 and 20kW View More

Geophysical laboratory needed to make geophysical measurements on 1-5 soil cores, each comprised of multiple test samples. The desired measurements in... View More

India geology laboratory needed for electricity conductivity test of quartz. View More

Telecommunications laboratory needed for lab examination and reporting of our mobile phone devices that we produce in China. 1) 3G signal quality and ... View More

Contract Laboratory needed for Independent testing of Duct Mount Humidity Transmitters (2% accuracy) from Automation Components Inc, Dwyer, Setra, Vai... View More

Electrical laboratory needed for UL certification testing of individual grid tie inverter which is sun1000g2 lcd . Please provide quote. View More

Mechanical Laboratory needed for electrical and mechanical properties testing of 0.40 PVC Shielded cable with 8 22 AWG conductors , we need to get th... View More

Electrical laboratory needed for IEC testing of tape (synthetic) used in the fire resistance cables to sustain up to 800 deg celcius of temperature ... View More

Electrical laboratory needed for IEC Testing: Request quotation to conduct Full type material test ( PVC Compound compliance )
Grade PVC/A (insul... View More

Contract Laboratory needed for IEC Testing of Copper tubular Cable lugs, Connectors to be tested as per IEC 1238-1:1993.
AS/NZS 4325.1:1995
.
View More

Electrical certification laboratory needed for IEC certification Testing of washing machine 6.5 Kg. View More

Certification Laboratory needed for IEC mark testing of 220V 2000W voltage stabilizer, View More

Medical Technology laboratory needed for medical device testing to 60601-1 Medical electrical equipment?Part 1: General requirements for
basic safety... View More

LED rechargeable night light designer is using a China manufacturer and needs Asia laboratory for certification testing. View More

ELectrical Product Safety Laboratory needed for European Union EU Restriction of Hazardous Substances Directive ROHS verification of electronic compo... View More

Electrical compliance laboratory needed with in-house capabilities to do the following compliance test. Please provide quote for each test. 1. FCC/IC... View More

ELectrical Laboratory needed for SAE Testing to Test impedance of twisted pair wires at 1MHz by the open and short methods per SAE J1939-11. Wires are... View More

Electrical Laboratory needed for testing of an electrothermic sensor according to the ECE R118 norm (fire protection) View More

Electrical Laboratory needed for Dimensional layout performed on Electonic board. Need to be advised as to what equipment would be used to perform th... View More

Materials laboratory needed for IEC electrostatic testing of polyethylene sheet to to IEC 61340-4-4, Electrostatics standard for its electrostatic pro... View More

USA UL certification laboratory needed for conveyor system testing (brand hytrol), with 3 electrical control panels the individual components in the ... View More

Southeast USA electrical laboratory needed for electrical control panel testing of installed a conveyor system (brand hytrol), with 3 electrical cont... View More

Northeast North America (Canada or USA) electrical certification laboratory needed for ANSI Certification of an electrical revenue metering system to ... View More

Electrical compliance laboratory needed to test LED christmas lights to obtain certificate of conformity if christmas light pass safety test View More

Electrical laboratory needed for materials characterization for characterizing a commercial coaxialspecialty cableliterature.Resistance, loop resist... View More

South Africa and/or Kenya Environmental Laboratory needed preparation of tender specifications for quantitative laboratory analysis of polychlorinated... View More

Materials laboratory needed for breakdown voltage bdv testing of coatings View More

USA Electrical Laboratory needed for UL certification testing of LED light assembly and complete electronic assembly imported from India. View More

Electrical Laboratory needed for CE Compliance Testing to the requirements of EU Council Directive 2004/108/EC, the EMC Directive View More

Electronics Safety Laboratory needed for electrical safety testing of a belt that can communicate and charge batteries and phones of any other wirel... View More

Large company needs electrical laboratory for accelerated power cycling for a new 120v device View More

Electrical Laboratory needed to Perform ESD test on ATV fuel system to SAE Standard at SAE J1645 View More

Electrical Laboratory needed for electrical shock testing services to determine whether a magnetic-coil (custom built) can withstand extremely, high-... View More

Southeast preferred United States laboratory needed for ASTM Lead Equivalency and Attenuation testing per ASTM F2547-06 standard lead free material t... View More

India NABL accredited laboratory needed for partial discharge testing View More

Electrical laboratory needed for partial discharge testing View More

third-Party certification laboratory needed for certification testing of a Far Infrared flat panel space heater . Infrared needs to be certified in wa... View More

ONGOING TESTING Independent Contract Lab needed for oil transformer sample testing of Electrical Transformer Oil Samples, The tests required are: Tabl... View More

Electrical laboratory needed for UL certification testing of Damper Products. View More

Electrical Laboratory needed for AC & DC electrical conductivity testing for fibreglass used in ladder stiles. Need to test using method described in ... View More

Power conductor company needs electrical laboratories for overhead power conductor testing. View More

Electrical Laboratory needed for IEC comparative testing on lead acid batteries to IEC60896 (or recommend the best test to compare if that is out of d... View More

Electrical Laboratory needed for evaluation of electrical system of X-Ray Inspection Vault The vault consist of: · 4 walls and a ceiling · 2 motor dr... View More

Florida electrical safety laboratory needed for shielding effectiveness of EMI Sheidling Equipment View More

Pump manufacturer needs Electrical Laboratory for EMC Testing of u-PVC column pipe View More

Electrical Certification laboratory needed for certification testing of USB wall mounted socket for charging purpose. 13A Socket 2Gang size with 2 US... View More

Physical Laboratory needed for comparison testing of two electrical fuse terminals for material strength and hardness, as well as the memory and sprin... View More

Egypt Geology laboratory needed for geotechnical testing: Pull-out tests for Pull-out and lateral-pressure test. Pull-out Tests (#1) must be carried o... View More

NABL approved electrical laboratory needed for solenoid valve testing: Required testing of electromagnetic coil of solenoid valve as per standard IEC ... View More

Asia electrical laboratory needed for required IEC electrical safety testing on Slot machines to fulfill legal regulation? e.g EMC? View More

Asia Electrical Laboratory needed for solar panel testing of 60-Cell (245,250,255,260,265W) and 72-Cell (300,305,310,315W). View More

San Francisco Bay area Electrical Laboratory needed for full Electricity meter testing to ANSI Standards: ANSI C12.1 is required for Electricity Meter... View More

Electrical Laboratory needed for IEC Testing: Audio, video and similar electronic apparatus - Safety requirements to IEC 60065 and IEC 60268-3:2013Sou... View More

USA Electrical Laboratory needed for ANSI Flashlight Testing: Test 6 LED Flashlights to ANSI FL1 standards, Flashlight Standards View More

ELectrical laboratory needed for IEC Compliance testing to IEC 62561-2 Document. The standard calls for marking tests, Ageing tests, Corrosion Tests, ... View More

Electrical certification laboratory needed for Electrical certification testing to EU standards for electrical security systems to standards EN50131-1... View More

URGENT: Electrical Product Safety Laboratory needed for EMC (Electromagnetic Compatibility EN 50130-4: 2011) testing for smoke alarms.
We have two m... View More

Electrical Laboratory needed for ASTM Testing for dielectric strength, the test shall be in accordance with ASTM D149 and the epoxy thickness in the s... View More

Electrical laboratory needed for IEC, ISO and ASTM testing: ISO 4689-3, Iron ores ? Determination of sulfur content ISO 14869-1, Soil quality EN 12457... View More

Security Lighting company needs electrical laboratory for testing of product to 810F standards of HAND HELD FLASH LIGHT / SEARCH LIGHT / TORCH LIGHT t... View More

Electrical Laboratory needed for light testing: testing of product to 810F standards of HAND HELD FLASH LIGHT / SEARCH LIGHT / TORCH LIGHT tested to M... View More

Electrical laboratory needed for UL Testing to UL 1573, Stage and Studio Luminaires and Connector Strips UL 1993 Self-Ballasted Lamps and Lamp Adapter... View More

Renewable Energy company needs electrical certification laboratory for all electrical certification testingincluding LM 79, HV Test
Environmental te... View More

Europe electrical product safety laboratory needed for Thermal testing:
* Wind Test
* IP Test
1-2 units View More

Semiconductor company needs electrical laboratory for EMC testing scope as per automotive standards at your facility. 2. Please provide the process an... View More

Electrical laboratory needed for materials testing: Dielectric Constant according to ASTM D150, - DC Resistance & Conductance according to ASTM D257 -... View More

California Materials Laboratory needed for quote first for finding out spec of sample of Nylon 6 or Nylon 6/6 hex head bushings, especially on electri... View More

Canada GMP Health Canada Pharmaceuticals Analytical Chemistry Laboratory needed for Propofol Testing: Globule Size by Coulter Counter determination
... View More

Toxicology Laboratory needed for OECD Toxicology Studies on 3-10 cleaning products. OECD 430 In Vitro Skin Corrosion: Transcutaneous Electrical Resis... View More

Asia Electrical Laboratory needed for ASTM electrial testing: Insulation grade Kraft paper.

View More

Europe electrical laboratory needed for UL508 Overload and Endurance test 100k cycles - General Use - 230VAC 25AAC 0.8 Power factor View More

Europe Electrical Laboratory needed for ANSI Electrical testing Require ANSI C12.20-2010 Clause:5.5.4.13 & ANSI C12.1-2008 Clause:4.7.2.13: Test No 13... View More

USA, Argentina, Germany, France biomedical labroatory needed for IEC Testing: Ultrasound for physiotherapy - samples - 01 und
Stimulator for physioth... View More

Asia electrical laboratory needed fr CE, UL and RoHS testing:

1. Intelligent Timer 1030950
2. Spectrum Tube Power Supply 1130090
3. Van De Graaff... View More

Europe or North America Electrical Certification Testing of Personal Protection Equipment PPE to IEC 60895 testing for cunductive garments up to 800 k... View More

Engineering firm needs Electrical and mechanical Laboratory for Life cycle testing of industrial cleaning equipment View More

Europe, Switzerland, Germany, Italy or Scandinaia Laboratory needed for metal testing two metal strips: a) 0.5 mm Steel and b) 1.5mm Aluminium for the... View More

California Electrical Laboratory needed for power switching box testing of: Short Circuit test to 10KA for an Auto Power Switching Box UL1008 approva... View More

Electrical Laboratory needed for research study for studying a printed circuit board's (PCB) in-plane CTE and out-of-plane warpage induced by a steady... View More

USA electrical laboratory needed for electrical Testing of components (transformers, protection equipment, etc) against power grid (15kV) and up volta... View More

USA electrical laboratory needed for ASTM Testing: Dialectric constant of polymer film View More

ONGOING TESTING : USA electrical laboratory needed for Electrical Corona extinction testing of semi-rigid cable. Cable is M17/151, 133, 130, & 129. ... View More

California electrical laboratory needed for IEC Testing: IEC/EN 60747-5-5Optocoupler testing for Approval for Reinforced Insulation View More

Australia Electrical Laboratory needed for EN61235 - IEC60855 Insulating Composite Material Testing of Glass fiber Foam filled insulating tubes of 32 ... View More

NG and SEC Certified electrical Laboratory needed to test some stranded ground wire. Just dimensions, resistance, resistivity, T&E. The lab needs to b... View More

Large Energy Company needs electrical laboratory for electrical testing on grid system. Type Tests - ? Control Type Test?,
Specified test will be pe... View More

UK, USA or Canada Electrical laboratory needed for ISO Testing: electrical conductivity testing to iso 8031:2009 View More

ISO 17025 electrical labooratory needed for IEC Electrical Proficiency Testing for IEC 60076, Power transformers ?. Part 3: Insulation levels, dielect... View More

Materials Laboratory needed for film testing to ISO 4892-2 Part 2 Method B Cycle 5
Material: PET and Polycarbonate films, which are electrically con... View More

ILAC Accredited Laboratory in Europe needed for electrical testing: Accuracy testing for a voltmeter with HV probe(1/1000) in the range of 1kV to 4kV ... View More

Mechanical Laboratory needed for SAE testing on truck/trailer cable to SAE J560 and SAE J2394 SAE J844 and SAE J1131. This is the coil cords you see... View More

USA electrical laboratory needed for ANSI certification testing to test/certify our electrical connector devices as per ANSI C119 (direct burial appli... View More

Electrical Laboratory needed for Electrical testing according to ANSI/AAMI EC 53 of leadwires for ECG electrodes. (Dielectric strength, noise testing,... View More

Manufacturer of industrial helmets,Police Helmet & Fireman Helmets need India NABL Laboratory to test safety and protective helmets for Shock Absorpti... View More

Materials Laboratory needed for plastics ASTM Testing to ASTM D785-08 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating... View More

Electrical laboratory needed for re-designing existing power supply modules (dual power supply,. Triple power supply ,SSR) of air-born systems. We nee... View More

Pultrusion company looking for Europe plastics laboratory for ISO mechanical, electrical and heat testing s for pultruded FRP profiles. Would help, if... View More

Manufacturer needs Polymer Laboratory for Materials Testing: ASTM Testing to ASTM D922, Standard Specification for Nonrigid Vinyl Chloride Polymer Tub... View More

Mexico or USA Electrical Certification Laboratory needed for Photovoltaic certification of photovoltaic panels to IEC 61853 or ASTM E1036-02 some of m... View More

Electrical laboratory needed for BS EN standard conformity testing to EN 442 Specification for radiators and convectors. Evaluation of conformity View More

Electrical equipment importer needs electrical certification lab for certification verification testing to verify the authenticity of a CB Test Certif... View More

South Africa electrical laboratory needed for IEC Testing of 250mm Professional Tilting arbor Table Saw View More

India electrical laboratory needed for IEC Testing Cable tray/ladder system as per International Electrotechnical Commission IEC 61537, Cable manageme... View More

Materials Laboratory needed for IP 274 Testing and ASTM Testing:
Jet fuel analysis for "Electrical conductivity" and "Contaminants - Existent gums" View More

Canada Materials Laboratory needed for Aggregate testing. Electrical Resistivity Testing on Aggregates in Ontario or Canada.
View More

Materials laboratory needed for ASTM Testing. Electrical insulating fluid testing for CTE Test. isoparaffinic oil and a standard white oil. I can prov... View More

Electrical Laboratory needed for electrical testing to electrical standard: Test: Transient Voltage Durability Test
Sample: Car front sensor
View More

European Union Electrical Laboratory needed for RoHS testing and REACH Compliance testing: Could you perform analysis for substance detection as (refe... View More

ASIA electronics laboratory needed for IEC Testing: Lab Heat cycle testing of electrical Fittings to IEC 61238-1 View More

Gassin tendency ASTM D2300, Standard Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirell... View More

US Electrical Laboratory needed for ANSI Electric Meter Testing To test 1 to 3 samples, reference ANSI C12.1 Section 4.7.3.6.1 and 4.7.3.6.3 and cust... View More

Asia Electrical Lab needed for IEC TESTING: Electrical Laboratory testing Services for the 150 kV transmission insulators, such as the visual test, Dr... View More

Electrical Laboratory needed for Optical testing based on EN12966 Testing lumunance and contrast of emitted light (using LED's) within certain beam w... View More

IEC Electrical Laboratory needed for IEC Testing of Electronic Ignitor for HID lamps View More

Northeast USA engineering laboratory needed for SAE Testing to Marine SAE J1171, External Ignition Protection of Marine Electrical Devices. for brushl... View More

Asia electrical laboratory needed for IEEE Testing: Electrical Heat cycle Test & IEC61238-1(2003-5) & Ageing Test & Tensile stress test View More

Asia electrical laboratory needed for CE Marking, IEEE Testing to Electrical IEC61238 Product = Voltage detector TestPen
CAT IV 1000V. View More

NABL Texas electrical laboratory needed for ASTM Testingof aluminum alloy composition to ASTM B233. Must be NABL accredited View More

India Government approved Laboratory needed for electrical testing of Electrical Insulated Mat material (CONFIRMING to IS 15652:2006). View More

Middle East Electrical laboratory needed for IEC Testing of different types of Lamps Luminaries in accordance with IEC standards View More

Electrical Laboratory needed for IEEE electrical Testing: electric arc erosion rate in low voltage circuit breakers arc erosion rate for low voltage a... View More

Manufacturer of PVC Conduits Pipes and fittings , needs approved laboratory for materials testing: British Standard tests in the British Standard BS 6... View More

Electrical Laboratory needed for IS Testing and IEC Testing of Electrical Grade Insulating kraft Paper View More

Polymer Laboratory needed for ASTM Testing: Electrical conductivity testing of some polymer composites to be tested to ASTM D 257 (Electrical conducti... View More

Asia electrical laboratory needed for IEC Testing: Determination of the halogen acid gas content in GRP/FRP(Fiberglass Reinfored Plastic) to IEC 60754... View More

Electrical laboratory needed for bending endurance testing on test cable under varying temperature conditions. Following this a voltage test on the i... View More

Materials Laboratory needed for BS / IEC Testing: electrical breakdown strength test in accordance with British Standards Specification: BS 5874, Meth... View More

US analytical chemistry laboratory needed for alimet testing: Physical data on Alimet (2-HYDROXY-4-(METHYLTHIO)BUTYRIC ACID CAS=583-91-5). list of par... View More

URGENT: Stainless steel electrical junction boxes manufacturer needs ISO/EC 17025 physical laboratory for IK10 Impact testing to ASNZS 60079 or IEC 60... View More

Chicago Electrical Laboratory needed for certification testing: Mated Electrical Connector IP69K Testing. There will be two sets of mated assemblies, ... View More

NABL / AALAC electrical laboratory needed for complete electronic testing of electronic fan regulator (capacitor type) as per IS:11037 View More

British Columbia, Canada electrical laboratory needed for ANSI Testing to ANSI 12.1 Revenue grade meters/CT energy metering module that can meter sing... View More

India electrical laboratory needed for IEEE Testing of HDPE pin Insulators to ANSI standards View More

Electronics manufacturer needs electrical laboratory for ISO Testing: ISO contamination Testing according ISO 16232 Road vehicles -- Cleanliness of co... View More

Materials Laboratory needed for materials ASTM Testing to ASTM 695/ ASTM 638/ASTM 648/ASTM D570/ASTM D149 on HDPE sub-flooring channel or track that ... View More

California mechanical laboratory and electrical laboratory needed for ANSI Testing, UL Testing and FCC Testing: Need ANSI 156.2, ANSI 156.25, UL 437, ... View More

Asia electrical laboratory needed for IEC Testing High voltage detector as per IEC 61243-1, Live working - Voltage detectors , ." View More

Australia electrical laboratory needed for optical testing of VMS sign design to comply with AS4852 the testing is detailed in the standard it is basi... View More

Large electrical manufacturer needs environmental simulation laboratory for International Electrotechnical Commission IEC Testing of Ground Enhancemen... View More

New Jersey Electrical Laboratory needed for antenna testing for Measurement of antenna characteristics View More

New Jersey Materials Laboratory needed for metals testing:

a) SEM/EDX
b) TEM
c) Salt Spray Chamber (ASTM B 117)
d) Taber Abrasion (ASTM D 4060) ... View More

India electrical laboratory needed for IEC Testing of Solar Inverter to IEC 60068-2 214.30 View More

Electrical Laboratory needed for IEC Testing according to International Electrotechnical Commission iec 61537 Cable management - Cable tray systems an... View More

Electrical Laboratory needed for IEC electrical proficiency testing for Measurement of thickness of insulation for Low and medium voltage Cable accord... View More

NY electrical laboratory needed for electronics testing of recycled electronic products. 100% of the metals and nonmetals with our patented technolog... View More

Large electronics manufacturer needs Electrical Laboratory needed for voltage testing to Track and time to Track testing? We normally do samples in g... View More

Electrical Laboratory needed high frequency testing up to 20GHz, along with time domain testing of 10Gbps data rate for Active optical Cable assemblie... View More

Large Electronics Manufacturer needs qualified electrical laboratory to Perform DMA or DSC on resin sample to obtain Tg per requireemnt(provided)." View More

Mfg or of electrical conductors/cables & Electric Meter needs physical laboratory nad electrical laboratory for electrical testing and physical testi... View More

Electrical laboratory needed for prototyping: prototype materials for OLEDs synthesized." View More

Africa electrical laboratory needed for maximum power transfer testing: wattmeters, voltmeter, ameter, power supply, resistance,cables View More

New England electrical laboratory needed for ASTM Testing to ASTM B539-02 Contact Resistance - ASTM B539-02 Various surface finishes on printed circui... View More

India Electrical Laboratory needed for International Electrotechnical Commission (IEC testing electronics testing to IEC 60228, conductors of insulate... View More

Europe Mechanical Laboratory needed for Mechanical Testing to ISO 16750, oad vehicles - environmental conditions and testing for electrical and electr... View More

INDIA ELECTRICAL LABORATORY NEEDED FOR ELECTRICAL TESTING OF IP CAMERA TESTING INCLUDING FOCAL LENGTH, ACTIVE PIXELS , IR CORRECTION ETC. View More

Thailand electrical laboratory needed for IEC testing, CABLE TRAY SYSTEMS. AND CABLE LADDER SYSTEMS View More

Delhi electrical laboratory needed for electrical testing of Fiber Reinforced Plastic CABLE TRAY AND LADDER Electric Conductivity Testing View More

China electrical laboratory needed for electrical testing of AC/DC adapter for safety View More

USA physiological chemistry llaboratory needed for Measuring cellular energy parameters pre and post usage of a PEMF device which visibly rejuvenates ... View More

US electronics laboratory needed for IEEE Testing: IEEE Electrical Surge testing: IEEE C62.41.2 Location Category A View More

Asia Electrical laboratory needed for UL 508 or IS/IEC testing of Low Voltage Disconnector used in telecom SMPS application. These single pole dc cont... View More

Electrical laboratory needed for IEC Testing: Inclined Plane, Tracking and Erosian tests to International Standard IEC 287, Electric cables - Calculat... View More

USA or Europe FDA GMP electrical laboratory needed for FDA 510 (k) ANSI Testing, AAMI Testing and IEC Testing to IEC 80601-2-30:2009
ANSI/AAMI ES 606... View More

electrical Mechanical Laboratory needed for Abrasion testing: EN60068-2-70 (e.g. ABREX)abrasion test of totally four painted automotive samples (100 0... View More

Europe ILAC electrical laboratory needed for Type Testing on a 6.6kV trailing cable of open cast mining to Australian Standard AS2802Type 450.6 Traili... View More

Physical Laboratory needed for Urgent IEC Testing to IE 60079-1-1, Electrical apparatus for explosive gas atmospheres. Maximum Experimental Safe Gap(... View More

US Electrical Laboratory needed for electrical testing, mechanical testing and chemical testing for 60V and 600V cables to ISO 6722-1 Road vehicles --... View More

USA Electrical Certification Laboratory needed for IEC Testing: X-Ray Film Digitizer Equipment IEC 60601-1 3rd Edition and a test report and CB certi... View More

Asia electrical laboratory needed for IEC testing. View More

India Electrical Laboratory needed for RFI and EMI LED Tube Light testing and certification of Led Tube light I.e.T8 led tube light. 2 numbers. 1) Min... View More

India Electrical Laboratory needed for electrical Testing of Electrical measuring instrument View More

Europe Electrical Laboratory needed for IEC Voltage Testing to IEC 60243 for dielectric properties of the insulating coating applied on a substrate of... View More

India electrical laboratory needed for IEC electrical testing: high current and high voltage View More

Electrical Laboratory needed for IEC electrical testing as per IEC 60076: C2 E2 F1 TESTING OF DRY TYPE CAST RESIN TRANSFORMER AS PER IEC 60076 View More

Northern California Electrical Laboratory needed for electrical certification for electric bicycles to 16 CFR Part 1512 View More

Large electronics firm needs electrical laboratory for electrical product safety testing 1.Need you support to Know Which are the Labs do have facilit... View More

Electrical Laboratory needed for lightning conductor testing in building.


View More

India electrical laboratory needed for electrical product safety testing 1. LCD /LED product safety testing as per IS616: 2010.
2. Time period for te... View More

ELECTRICAL LABORATORY NEEDED FOR ASTM TESTING, DIELECTRIC CONSTANT AND DISSIPATION FACTOR FROM 2 UP TO 14 GIGA HERTZ TO ASTM D 150, Standard Test Meth... View More

Rubber manufacturer exporting rubber products to Europe needs rubber testing of rubber mat for electrical resistance testing to:
EN 13501-1/DIN 4102... View More

Turkey electrical laboratory needed for IEC Testing : type tests according to iec 60071-202 for prefabricated compact substation View More

USA Electrical and Mechanical Laboratory needed for ANSI Testing: Pefrom the Complete set of testing describe in ANSI 119.4 for Al-AL conductors with ... View More

Electrical laboratory needed for conductivity testing of hose View More

South Africa materials laboratory needed for ASTM Testing and ISO Testing of oil & gas (specifically diesel fuel)to Anti-Corrosion to ASTM 0665
Anti-... View More

India Electrical Laboratory needed for EMI & EMC TESTING

1
Rectilinear Potentiometer
Penny & Giles
SLS-095-075-3K-P-66
1

2
Single T... View More

USA Electrical Laboratory needed for UL Testing: 1 sample for UL 181 Erosion resistance. request from client (item 2 only):
1. We have an electrical... View More

Electrical Laboratory needed for IEC tests to IEC 60811-3-1, subclause 8.2 IEC 60811-3-1, subclause 9.2IEC 60811-1-4, subclause 8.4. These tests only... View More

UK Electrical Laboratory needed for UL Short Circuit Testing 100,000 amp short circuit UL Follow-Up test program View More

Malaysia, Penang or Singapore electrical laboratory needed to conduct current saturation test and Irms test for an inductor" View More

USA, East Coast, California, Chicago, Phoenix, or Houston Electrical and environmental Laboratory needed for ANSI testing of smart meters per ANSI C12... View More

Electrical Laboratory needed for ANSI Testing to ANSI 119-4,Electric Connectors - Connectors For Use Between Aluminum-to-aluminum Or Aluminum-to-coppe... View More

Life Science Company needs Canada Medical Electrical Laboratory for International Electrotechnical Commission IEC Testing to IEC60601-1:2005,Medical E... View More

Aia Electrical Laboratory needed for electrical and Physical testing of Cat5e FTP cable:
Item testing, Rating testing, Conductor Resistance Testing, ... View More

Blood bank needs FDA GMP electrical laboratory for FDA EMC Testing of blood banking software that uses 802.11x wireless connections. View More

USA ELECTRICAL PRODUCT SAFETY LABORATORY NEEDED FOR IEC TESTING: WIRE TESTING FOR HALOGEN CONTENT TO IEC 60754-1, test on gases evolved during combust... View More

Electrical Laboratory needed for IEC Testing to IEC 60754-1, Test on gases evolved during combustion of materials from cables - Part 1: Determination ... View More

Electrical Laboratory needed for International Electrotechnical Commission IEC Testing to IEC61643-321 Components for low-voltage surge protective dev... View More

Europe Electrical Laboratory needed for IEC Testing: short circuit test cable clamp K36/52 according to IEC 61914, Cable cleats for electrical install... View More

Lighting company needs electrical laboratory for IEEE electrical testing to IEEE 1313.1 standard, Standard for Insulation Coordination - Definitions, ... View More

Electrical Laboratory needed for International Electrotechnical Commission IEC Testing of electrical adhesive tape to IEC Specification, IEC 60454-3-1... View More

USA electrical laboratory needed for Heat Run Testing on 15KV circuit breaker bushing - 1 sample View More

USA Consumer Products Electrical Laboratory needed for AHAM Testing to HU-1-2006, Portable Household Humidifiers. Humidifier Testing - water output te... View More

UKAS Medical Device Laboratory needed for electrical medical device testing View More

Europe Electrical Laboratory needed for IEC Testing, Mechanical and Electrical Testing of cable cleats for IEC 61914, Cable cleats for electrical inst... View More

Electrical Laboratory needed for IEC Testing: IEC 61230, Portable equipment for earthing or earthing and short-circuiting View More

California Electrical Laboratory needed for IP Testing: Water Proof testing (IPX standard, Ingress Protection Rating) is needed to be done on a fully... View More

India Electrical Laboratory needed for Electrical Resistance Testing in accordance with MIL-DTL-5541 Cl-3, Military Specification, Chemical Conversion... View More

Mexico certification laboratory needed for electrical reliability Testing for equipment:

Brand: Monster Power
Model: HDP 1800
Description: High d... View More

Middle Eat Gulf Electrical Laboratory needed for consumer products testing: electrical testing of hair dryer and hair straightener View More

Europe or Middle East ISO 17025 Electrical Certification Laboratory needed for accreditation testing of Power System Laboratory Lab will be accredited... View More

Ireland or UK electrical laboratory needed for electrical Testing of fuse connection in moulded plug. View More

Europe electrical certification laboratory needed for electrical certification testing of Lamps, Gear, Indoor and outdoor lighting fixtures imported f... View More

Electrical Laboratory needed for Electrical Testing of Electrical Insulator Sheet,which is used like a carpet in front of Substation, High Voltage Gen... View More

Electrical Laboratory needed for Electrical Testing, Transformer Testing to IEC Standard IEC60044-1 Instrument transformers View More

Large Electronics Mfg needs West Coast USA electrical laboratory for qualification testing of electrical brushless motor connector contacts to separat... View More

ELECTRONICS CERTIFICATION LABORATORY NEEDED: CE LABORATORY FOR ELECTRICAL CERTIFICATION OF OUR POWER SUPPLY(SAFETY & EMI/EMC) WE ARE MANUFACTURER OF E... View More

Electrical Laboratory needed for electrical resistivitytesting of pure Copper (20 °C) 16.78 nΩ·m. The Copper pen-size bar was already treated th... View More

Brazilian Trading Company needs electrical laboratory for quality control testing to have quality control inspection on the production in China and qu... View More

USA electrical labroatory needed for polymer/ceramic testing: Dielectric constant and dielectric strength of polymer/ceramic nanocomposite View More

Asia Electrical Consumer Products Laboratory needed for Air Conditioner Performance Testing: ISO Testing and JIS Testing to ISO 5151(1994)and Jpanese ... View More

Middle East electrical laboratory needed or emi testing

address: dammam ,saudi arabia View More

Electrical Laboratory urgently needed for IEC Testing to IEC 550C and IEC 750C Glow wire testing done plus 175PTI testing done by lab that is approved... View More

Electrical Laboratory needed for NFC and IEC Testing of aerial cables to NFC-33-209 & IEC 60228: TYPE TESTING & UV TESTING OF AERIAL BUNCHED CABLES 1... View More

Large Electronics Manufacturer needs USA Electrical Laboratory needed for IEC Testing to IEC 60335-1 Clause 30 glow wire testing which references IEC ... View More

Europe mechanical and electrical laboratory neede for EN-50483 (complete) mechanical testing and electrical testing of cable equipment for isolated LW... View More

Electrical laboratory needed for electrical testig: 11 kv ct-pt test lab, tast as below 1- high voltage 28kv 2- induced test 3- 11kv accuracy test ap... View More

USA ISO electrical and mechanical laboratory needed for Automobile and motorcycle Spark Plugs testing. View More

Electrical Laboratory needed for ANSI Testing to ANSI C 136.10 locking-type photocontrol, used to control street luminaires, to standard ANSI C 136.10... View More

Mumbai electrical laboratory needed for LED Testig to test light output intensity of LEDs View More

NEW DELHI ELECTRICAL LABORATORY NEEDED FOR ELECTRONIC CONSUMPTION TESTING OF ELECTRICAL METER INSTALLED BY N D M C View More

European Union electrical laboratory needed for EN electrical testing to EN 60684-3-409:1999 : Break-down voltage testing, temperature resistance test... View More

California FDA Medical Device Electrical Laboratory needed for IEEE Testing and ISO Testing View More

Europe Electrical Laboratory needed for ANSI Testing of flash lamp PRO-1 to ANSI FL1 View More

Electrical Laboratory needed for DIN Testing: Dielectric strength testing, Dielectric dissipation factor (tanä) testing , Volume resistivity testing, ... View More

Southeast USA Electrical Laboratory needed for Dielectric Withstand and Insulation Resistance testing to US Army Missle Specification MIS-24170J for a... View More

Manufacturers of safety equipment and clothing needs electrical laboratory for electrical arc testing. What is the time required for testing? The ma... View More

Electrical physical laboratory needed for insulation testing - water absorption- on insulation of LT Aerial Bunch Cables please and whether tube extru... View More

India Electrical Laboratory needed for electrical testing of bimetal contacts of electrical switches for the silver layer thickness on the contacts. ... View More

Electrical Laboratory needed for ASTM Testing: ASTM D-877 electrical breakdown
astm D-924 Power Factor 25C&100C
ASTM D-92 Flashpoint
ASTM D-971 In... View More

GOVERNMENT IS REQUESTING ELECTRICAL LABORATORY FOR ASTM ELECTRICAL TESTING ON FIBERGLASS MATERIAL #ASTM-D-150 -AC LOSS CHARACTERISTICS AND PERMITTIVI... View More

Israel electrical compliance laboratory needed for compliance testing of led display to check its compliance with the European Standard for Mobile VMS... View More

California Electrical Laboratory needed for electrical testing of RF connectors for impedance, voltage rating, dielectric withstanding voltage, VSWR, ... View More

Electrical Laboratory needed for IEEE Testing: Electrical temp-rise testing. Perform temp-rise test on a bushing rated at 21,500 amps per IEEE standar... View More

Electrical laboratory needed for ANSI Testing of 4 flashlights to ANSI fl-1. I need to know the price as well. View More

USA Electrical Laboratory needed for Amperage Limit Testing:

Start with powering the connector (2-10AWG) up to 30A until the temperature on the out... View More

Canada or USA Electrical Laboratory needed for IEEE Testing : electrical tests of 600VAC 3-phase harmonic filtering product-line (up to 10 samples), r... View More

Texas Electrical Laboratory needed for UL Testing: ul61010-1 Standard: Safety Requirements for Electrical Equipment for Measurement, Control, and Labo... View More

Geophysical laboratory needed for Geophysical Measurements 30 core Samples, Tests Required
Primary Wave Velocity
Secondary Waves Velocity
Dielectri... View More

Eastern USA Mechanical Laboratory needed for ASTM mechanical, materials, chemical, electrical testing ASTM B 250, testing the resistivity and tensile ... View More

Europe Electrical Laboratory needed for IEC Testing, IEC 60332 Cable Test View More

USA A2LA electrical labroatory needed for ASTM Testing to ASTM D924-08, Determination of dielectric constant of thick (~20 mil), flexible films View More

India Electrical Laboratory needed for Acceptance Testing to IS Specification ForLT(1.1 KV) ,2.5 sqmm 2 Core PVC Insulated Aluminium Electric Service... View More

India electrical Laboratory needed for impulse testing on volatge transformer View More

Electrical laboratory needed for IEC Testing to IEC 61643-11 for our product LV Surge Arrester rate 480V. We will be much more appreciated if you can ... View More

USA Environmental Laboratory needed for ASTM Testing: Air Permeability ASTM D6539
Percolation Test ASTM D7242-06
Electr... View More

Electrical Laboratory needed for Electrical Acceptance Testing for 1.1KV 2.5sqmm,2ccore,PVC insulated,Aluminium Electrical service Connection Cable (o... View More

Ireland Electrical Laboratory needed for High Voltage Electrical testing of 20kV transformer bushing to establish electrical breakdown and check for m... View More

USA FDA GMP Electrical laboratory needed for ANSI/AAMI Testing to ANSI/AAMI EC12 Electrical performance testing for the accelerated shelf life tests f... View More

ELECTRICAL LABORATORY NEEDED FOR IEC TESTING OF ELECTRICAL TAPES TO IEC93 AND 250JOINTS IEC 60502-4 AND IEC 1442 FOR PERMITIVITY, DISSIPATION FACTOR,... View More

Germany electronics manufacturer needed electrical laboratory for CE Testing of DC power supply testing with input of 90-240VAC and 48V, 30A DC." View More

Middle East electrical laboratory needed for IEEE, DIN, ASTM , ISTA testing: COMPLETE Earth Resistivity Test for substation View More

Europe Electrical Laboratory needed for high power testin such as KEMA, etc.

View More

Canada electrical laboratory needed for FCC Precompliance scan
Radiated Inmunity Test" View More

Electrical Certification Laboratory needed for electrical certification testing (1) Conduct IEC 60695-11-10 Flammability test at 3.0mm thick for HB40 ... View More

Turkey electrical laboratory needed for IEEE Testing to test Hemodialysis machine to 60601-2-16 View More

Large electronics mfg needed electrical laboratory for IEC electrical testing: Dielectric and short-circuit current tests for disconnector switchs of ... View More

Southeast Asia UKAS Metallurgical laboratory needed for metal surface analysis(Corrosion level & current conductivity) To test effect of aerosol gener... View More

Electrical Certification Laboratory needed for Induction Cooker testing. Any international accredited electrical appliance testing laboratory which ac... View More

Canada Electrical Laboratory needed for UL Testing and CSA Testing of Central vacuum units, 5 SKU's for North America.
UL approved motor. View More

Electrical Lobaratory needed for capacitor testing a 20kvar power factor correction capacitor device under a controlled condition using motor on distr... View More

Middle East Electrical Laboratory needed for ASTM Testing for Appliance testing to ASTM F2834-10A View More

Electrical Laboratory needed for ASTM Testing: Electrical Hazard testing of two styles of boots: Compression, Impact, Ashing, UV testing.
Samples p... View More