Questions / Comments?
Call 1-855-377-6821or

New Laboratory conformance Requests

View All Laboratory conformance Requests

100 Most Recent conformance Laboratory Test Requests

Everyday, we receive new Laboratory Test Requests. These conformance Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking laboratories and lab suppliers for their projects.

If you are interested in seeing more information on these projects or viewing many more, Log-In or Create Account

Gunpowder TR TS 028/2012 Safety Confirmation

Explosives Laboratory needed for confirming the conformity of the safety of gunpowder (HS Code VED 3601000000) to the requirements of TR TS 028/2012 D... View More

Air Conditioner Energy Performance Test

Industrial Laboratory needed for split unit air conditioner energy performance testing in conformance with standard
(AS/NZS 3823.1.1:1998 ,AS/NZS 38... View More

Consumer Products Safety laboratory needed for LHAMA / ASTM testing of children's paint product and art material formulations for conformance to ASTM ... View More

Automotive laboratory needed for ISO conformance testing of 3 spark cables according the ISO 3808, Road vehicles -- Unscreened high-voltage ignition c... View More

LONG-TERM TESTING Materials laboratory needed for quarterly ASTM testing of tape for minimum peel strength of 60 oz/inch width when tested in accordan... View More

ISO 17025 accredited Europe food laboratory needed for full EU compliance testing of tomato paste View More

Large corporation needs analytical chemistry laboratory needed for water testing to determine the National Aerospace Standard (NAS) value of their de... View More

Materials certification laboratory needed for thermal conductivity testing of lightweight concrete to ASTM C177 Steady-State Heat Flux Measurements an... View More

Materials laboratory needed for ASTM Thermal Stiffness property testing as per ASTM D 1043 Stiffness Properties of Plastics as a Function of Temperat... View More

Electrical laboratory needed for cable testing as per IEC 61537, Cable management - Cable tray systems and cable ladder systems
View More

LONG-TERM TESTING Analytical food laboratory needed for USP and food chemicals code analysis of diatomaceous and purified siliceous earth products in ... View More

Materials laboratory needed for ASTM thermal conductivity testing of plastic roofing product to ASTM C518 (Standard Test Method for Steady-State Therm... View More

Materials laboratory needed for NRR/SNR rating of protective earmuffs to meet standard ANSI S3.19 and if possible EN 352-1: 1993 desired. View More

Product Safety laboratory needed for toxicology and compliance testing of mosquito repellent to show conformance to FDA standards and safety to market... View More

LONG-TERM TESTING Medical device materials laboratory needed for ASTM testing: active Af temperature of wire using DSC per ASTM F2004, Standard Test ... View More

LONG-TERM TESTING: FDA cGMP Pharmaceutical analytical chemistry laboratory needed for USP testing of two API:
1. Dicalcium phosphate dihydrate as pe... View More

Electrical laboratory needed for IEC testing of electronics to IEC 60730-1: Automatic Electrical Controls for Household and Similar Use View More

Construction materials laboratory needed for ASTM testing of flooring to ASTM E1007: Field Measurement of Tapping Machine Impact Sound Transmission Th... View More

LONG-TERM TESTING Electrical laboratory needed for IEC testing of electrical connectors as per IEC 61238 for current cycle View More

Materials laboratory needed for development of fire retardant rubber products as per EN 4554 fire testing of materials and components for trains View More

ISO mechanical automotive laboratory needed for IEC 17067 and SAE J 1401 tests of hydraulic brake hoses

View More

Food laboratory needed for EU compliance testing of imported teas to meet EU requirements for import. View More

LONG-TERM TESTING Lighting manufacturer needs physical laboratory for SAE and NFPA certification testing of LED lighting products to SAE J595, SAE J8... View More

Pharmaceutical analytical chemistry laboratory needed for USP testing to USP 30 Monograph for Dextromethorphan HBr; specific rotation <781S> of Dextro... View More

START-UP needs food laboratory for ingredient, preservative, and FDA labeling testing of an alcohol (arak) imported from Israel to meets FDA regulatio... View More

Electrical laboratory needed for IEC transformer testing of 72.5KV/145KV current transformer and voltage transformer according to IEC standard at a f... View More

URGENT FDA cGMP Pharmaceutical microbiology laboratory needed for USP testing to USP <81> monograph (antibiotics-microbial assays) View More

ISO 17025 certified laboratory needed for OECD physical / chemical testing of solid materials and an octanol / water solution as per three OECD standa... View More

Polymer Laboratory needed for self-accelerating polymerization temperature SAPT testing to UN3532 United Nations Committee of Experts on the Transport... View More

LONG-TERM TESTING Materials laboratory needed for ASTM physical, mechanical, and accelerated aging testing of polymer auto parts to car manufacturers ... View More

Automotive laboratory needed for VW-Audi plastics melamine resin foam testing for conformance to VW Audi requirements. View More

Materials laboratory needed for SAE Testing of adhesive tape to SAE-AMS-T-22085 Type II View More

FDA GMP laboratory needed for USP testing of length and length distribution of purified cotton fiber to USP <691> for large international healthcare c... View More

Environmental analytical chemistry laboratory needed for ISO & ASTM VOC emissions testing of window coating product to ASTM D5116 and ISO 16000-6 stan... View More

EPA environmental microbiology laboratory needed for GLP disinfectant efficacy studies of antibacterial, antiviral, and antifungal agent per OCSPP 810... View More

Automotive laboratory needed for mechanical testing to General Motors A/C hose pressure standards. View More

Consumer Products company needs analytical chemistry laboratory for AOAC Testing for composition verification of 50% pyrethrum extract in petroleum di... View More

Plastics Laboratory needed for Automotive Materials Testing to GMW14797 APOP Painted Plastic Parts Performance Requirements View More

Polymer Laboratory (FDA GMP) needed for poloxamer testing for limit of free ethylene oxide, propylene oxide, and 1,4-dioxane in poloxamer 407 accordin... View More

Cosmetic / Consumer Products Laboratory for safety testing of a hair care product to support compliance with FDA regulations and receipt of FDC certif... View More

Physical laboratory needed for DIN Testing of automotive parts to 5.9 Solar Radiation Test as per DIN 75220, D-OUT-F
Test duration 1 cycle = 240 hrs... View More

FDA GMP bioanalytical laboratory needed for USP compliant testing for heparin sodium including nucleotidic impurities, molecular weight determination,... View More

Food laboratory needed for ISO spice testing of saffron to ISO standards ISO 3632specifications for dried saffron obtained from the pistils of Crocus ... View More

Medical Device Manufacturer needs bioanalytical laboratory needed for USP particle analysis on samples taken from medical device. Please provide quote... View More

Telecommunications testing facility needed for near-field communication NFC standards testing of aerial cable fittings including insulated piercing co... View More

Mechanical Laboratory needed for ASTM outgassing testing for mechanical part with ASTM E595, Standard Test Method for Total Mass Loss and Collected Vo... View More

Large cabling company needs a laboratory for fire resistance cable testing to BS 6387 Cat C W & Z.

1) Copper conductor, Mica tape, XLPE insulation... View More

LONG-TERM TESTING Manufacturer needs Aerospace laboratory for FAA Testing of air field lighting transformers. View More

Plastics / Materials Laboratory needed for ASTM physical testing of plastic crates from different suppliers including:
Raw material tests as per ASTM... View More

Materials Laboratory needed for ASTM Testing of Carbon Black as perASTM D3849 TEM determination of carbon black particle and aggregate size. View More

Materials laboratory needed for DIN fastener cleanliness testing to Screw Type: DIN7500 PE M3X8Properties Class: 8.8Surface protection: DIN EN ISO9227... View More

Materials Laboratory needed for Plastics recycling conformity to IS 14534, Guidelines for Recycling of Plastics View More

Large pharma needs analytical chemistry laboratory for USP Testing to USP-NF monograph for Poloxamer 407 samples View More

Materials Laboratory needed for Adhesion tape testing for confirming Adhesiveness of tapes View More

Physical Environmental Laboratory needed with anechoic chamber for 3D antenna pattern measurements of a small unit (40 mm square) at 923.5MHz and 157... View More

Bioanalytical laboratory needed for USP Testing: gelatin bloom test as per USP requirements View More

Automotive laboratory needed for VW Testing toVTL 956 (VW Test Requirements for reflectors View More

FDA GLP laboratoryneeded for vendor qualitificaiton testing of surgical drapesL Resistance to microbial penetration - dry and wet, Cleanliness-microb... View More

Pharmaceutical company needs analytical chemistry laboratory for USP Testing to measure SULFUR CONTENT of a refrigerated solution to verify/validate ... View More

Pharmaceutical company needs *Globule size limits and *Limit of free fatty acid tested per USP 39 injectable lipid emulsion standards Per: Method I an... View More

URGENT NEED: Chicago restaurant needs Sushi rice tested to certify ph is 4.1-4.6 View More

Orthopedics Medical Device Laboratory needed for ASTM Biophysical Testing: static compression, compression sheer, subsidence, dynamic compression, fat... View More

Pharmaceutical company needs materials laboratory for ASTM Testing for Headspace and vapor pressure analysis to ASTM 2879 View More

Personalcare company needs medical device laboratory for Health Canada Class ii tampon compliance testing prior to importation into Canada. View More

LONG-TERM TESTING Analytical Chemistry Laboratory needed for flash point tesing on substance for environmental use. View More

Industrial firm needs materials laboratory for ASTM Testing of plant spray oil for ASTM D483 compliance View More

Environmental Laboratory needed for AASHTO Testing of portland cement/concrete per AASHTO M85. Standard Specification for Portland Cement (Chemical a... View More

US Laboratory needed for air purifier testing according to Association of Home Appliance Manufacturers (AHAM), AC -1-2015 Standard - ISO 17025 lab pr... View More

Coatings company needs materials laboratory for DIN rubber coatings testing to DIN 53 504 Tensile strength test, DIN 53 507 Tearing resistant tes... View More

University needs urgent testing of building materials: Thermal conductivity measurement of thin insulating materials View More

Property company in UAE needs Thermal conductivity & Thermal Resistance test of Rigid Polyurethane Foam core (PUR sandwich Panels) as per EN 12667 tes... View More

Urgent Need by Large UAE construction company for testing of foam materials per BS EN 13468 (Thermal insulating products for building equipment and in... View More

Pharma needs Bioanalytical Laboratory for Japanese Pharamcopeia (JP) Amino Acid Analysis for Peptides Amino Acid Analysis of Leupolide Acetate as per ... View More

Chemical company needs laboratory for Dishwashing Liquid and Laundry Detergent testing for % of actives, presence of Formaldehyde and presence of Phen... View More

Europe company needs materials laboratory for specialized military-use tape testing for reflective, effective- fluorescence, yellow color,fire resista... View More

Italian cosmetic company needs consumer product safety laboratory for REACH compliance testing and toxicological tests for REACH registration, 1-10 to... View More

Packaging/container company needs laboratory to test the breakdown of poly-lined containers for milk and similar consumables by means of hydrochloric ... View More

Building Supply company needs laboratory to test thermal insulating products for building equipment and industrial installations. Determination of tra... View More

Australian company needs baby product tested for safety and compliance with Australian Consumer Law 2011. The product is a handmade sensory pillow for... View More


FDA 175.300 and ISO 17025 accredited laboratory needed to test polymeric coating samples for repeat use with food contact, in order to use it to line ... View More

Cable tie company in India needs laboratory to verify compliance with ICE 62275 standard. View More

Food Safety testing laboratory needed to test for Isoeugenol in salmon product under FDA guidelines Due to Detention without Physical Examination Test View More

New Product company needs product test reports and General Certificate of Conformity (GCC) for an all natural ointment that will be applied to provid... View More

Dental distribution company needs viral & bacterial (live/viable) analysis from wipe/swab samples. Analysis should include identification of specific... View More

UK Medical device company needs paper surgical adhesive tapes tested
View More

Large medical company needs to test drug delivery of Taxol via small bore connections against chemical stress cracking per ISO 594-2, DIN 13276, DIN E... View More

International security lock company needs test of a Padlock per BS EN 12320 2012 View More

Large manufacturing company needs testing of Sealants (Silicone/PU/Acrylic) used in building and construction to comply with ASTM standards (ASTM C920... View More

Packaging Laboratory needed for child-resistant compliance testing of cannabis containers (1) push and turn model, consisting of different shape conta... View More

LONG-TERM TESTING: EPA GMP environmental laboratory needed for routine analysis of marine oil for two attributes:
1. EPA 1613 rev B for dioxins/furan... View More

Laboratory needed for SPF testing on sunscreen sample (AS/NZ method) View More

Auto parts manufacturing company needs quarterly check of metal surface for compliance with ANSI B46.1 Standard in compliance with Rz10 requirement in... View More

Container company needs laboratory for UN annual retesting of overpacks to assure UN compliance per 49 CFR 173.25 View More

Major beverage production facility needs ANSI/ASHRAE 52.2 Standard testing completed on air filters used in the building to determine current Minimum ... View More

Automotive parts manufacturing company needs testing of a lubricant certification per ASHRAE -97. The lubricant is a solvent based deforming product t... View More

Large engineering company needs laboratory to test Residual monomer rate % for Nylon PA6 material View More

Ongoing opportunity to provide a transport company shipping Basis Jet A1 with Pre Discharge test and after discharge to conduct recertification test '... View More

Automotive laboratory needed for VW Standard testing to measure colour and reflectivity in accordance to VW 50190, Components of the Vehicle Interior ... View More

Large European food packaging company needs FDA compliance test and safety check for a High-density polyethylene (HDPE) container used to package chew... View More

Food Ingredient company needs food laboratory for a dry food based blend testing for Acid Insoluble Ash View More

Global pharmaceutical manufacturing (advanced chemical synthesis) company needs testing of 2-3 samples of Polysorbate 80 and 2-3 samples of Polysorbat... View More

UK Company needs a laboratory to test Adipic Acid as a raw material for to be used in manufacturing for:
1. Purity
2. Heavy metals residue... View More

Large manufacturer of electro-mechanical products for the aerospace industry needs test facility for various types of compliance testing per DO160G ... View More

FDA Compliance testing needed for a low level disinfectant to be used on Class 1 (non critical) medical devices.

View More

Lighting manufacturer needs testing of LED light fixture to certifiy that it meets cleanroom ISO-5 and also biosafety levels 1 and 2. View More

Packaging testing needed for a container and packaging company for manufacturing process for several lines of containers that are specific to holding... View More

Long Term Testing: Lighting performance testing needed for LED T8 tubes to assure conformance with standards published by the manufacturer for their p... View More

Dietary Supplement Fulfillment company needs Certificate of Analysis verified: Analytical and Microbial testing on the finished packaged product cont... View More

Beverage testing for Antioxidant & Polyphenol needed: Long term testing of mixed tropical fruit juices. View More

Agriculture Laboratory needed for liquid fertilizer testing for contaminants including radiation,
agricultural soil, and pests View More

Consumer Products Laboratory needed for Certificate of Analysis testing of 4 pet grooming products for Appearance, pH, Specific gravity, Viscosity, Ef... View More

Food Microbiology Laboratory needed for Pasteurization Validation Microbiology Testing of Apple Cider to show a 5 log reduction for a raw sample unpas... View More

Cosmetic company needs testing for antimicrobial effectiveness per USP 51, total microbial count per USP 61, and absence of pathogenic organisms per U... View More

FDA compliant laboratory needed for FDA compliance and performance testing of nebulizer for working frequency, nebulization rate, particle size, oper... View More

ISO 17025 Laboratory needed for E-liquids testing for: nicotine, diacetyls, acetyl propionyl, formaldehyde, Propylene Glycol, pH, water View More

Oil Laboratory: needed for gasoline testing to determine the pKa of a commercial gasoline from California. View More

Agricultue Laboratory needed for hay testing. for labeling claims. View More

Manufacturer needs electrical laboratory for IEC Testing of Welding machine test per tto IEC 60971-1, Semiconductor convertors. Identification code ... View More

Computer Hardware company needs certification laboratory for ETSI certification testing an e-CALL modem according to multiple ETSI standards includin... View More

Tea Company needs food laboratory for Irish Authority and ISO tea testing for caffeine, saponins and antioxidants for two sorts of tea leaves. View More

URGENT TESTING Large Medical Device Company needs Microbiology laboratory for EP/USP Ethylene Oxide sterilization validation testing for 4 different... View More

Microbiology Laboratory needed for ISO antibacterial testing of nanoparticle embedded fabric for antibacterial properties to ISO 20743:2013 compliance View More

Regulatory Agency need food laboratory BPA testing in baby food product for BPA level View More

Cosmetics Laboratory needed for skincare product testing of gels for N-NITROSODIETHANOLAMINE (NDELA)
View More

Manufacturer of rubber parts needs materials laboratory for UL certification testing for a gasket. View More

Electrical laboratory needed for IEC certification testing for electrode holder, cable connector, and work clamp under IEC 60974, Arc welding equipmen... View More

Food analytical chemistry laboratory needed for Chemical validation testing of food processing chemicals. This involves us pulling diluted chemical s... View More

ISO Accredited USA and European Biophysical Laboratory Needed for biomaterials testing of dental implant material: to ISO 14801- Dynamic fatigue test... View More

Biomedical company needs biomaterials laboratory for ISO Testing of resins cements to ISO 5833:2002 specifications, Implants for surgery -- Acrylic r... View More

International Roadway construction company needs Laboratory for ASTM Testing of asphaltic plug joint for compliance to to validate ASTM D6297 complia... View More

Textile Laboratory needed for AATCC TESTING TO AATCC 195 MOISTURE MANAGEMENT View More

Laboratory needed for certification of compliance to Type Testing to IEC 60974.13, Arc welding equipment - Part 13: Welding clamp View More

Product Safety laboratory needed for EPA Testing: OECD skin corrosivity testing according to the following OECD guidelines - OECD 404, OECD 435, OEC... View More

Large company needs Laboratory for coating testing to ASTM E2178,Standard Test Method for Air Permeance of Building Materials View More

Geology laboratory needed for Compliance testing: Marble and granite tiles for import to UK and USA. Certified to British/American standards. example ... View More

Food Laboratory needed for USP and ASTM Testing: Compliance testing per US standards for oils: USP Grade White Oils for FDA, ASTM, and similar standar... View More

Multivitamin testing: For ingredient compliance of 4 finished multivitamins products after contract manufacturing process. To ensure same ingredients... View More

Large energy corporation needed materials laboratory for Corrosive Sulfur Test according to DIN 51353, Testing of insulating oils; detection of corros... View More

Packaging Safety Testing: Non-reclosable child resistant packaging for pharmaceutical products View More

Solar Panel Testing: Metal composite panel thermal properties testing required - emissivity, solar absorptivity, View More

Automotive testing for back up lighting: SAE J593 View More

Electrical lab needed for: product safety requirements testing for equipment for electrical energy measurement and control. IEC and ANSI standards View More

Laboratory needed for multiple testing on tape product
AAMA 713
AAMA 711
ASTM D412 ? Tensile Strength
ASTM D 1970 Water Penetration
AS... View More

Electrical Laboratory needed for conformance testing of automotive spark plug cables:
ISO 3808 (or SAE J2031) for Spark Plug Cable. ISO 3808 or SE... View More

Materials laboratory needed for surgical gowns testing
- NFPA Standards - Standards for the use of Inhalation Anesthetics.

- ASTM 1670, Standard ... View More

Analytical chemistry laboratory needed for GCC General Conformance Certificate Testing on a dietary supplement ( kanna-Sceletium tortuosum).. View More

Electronics laboratory needed for conformance testing of new cctv camera testing to Government of India parameters View More

Electrical certification laboratory needed for FCC conformance testing on transportation systems. Please provide quote View More

Food Laboratory needed for saffron testing to ISO test method 3632, for Saffron (Crocus sativus Linnaeus) View More

Electrical Laboratory needed for IP attestation conformity testing on our Electrical Panels as per IEC 61439-1 kindly elaborate the procedure, test ... View More

Large oil company needs Materials Laboratory for ASTM Testing of Polyurea Electric Motor Grease that requires the ASTM D3336, High Temperature Bearin... View More

Pharmaceutical microbiology laboratory needed needed for Vitamin B12 injection testing for sterility, purity, and contaminants View More

Medical device laboratory needed for chemical characterization testing of nylon surgical sutures for ISO1993 compliance. View More

Company needs Laboratory to conduct study of recyclability of PET kegs. and conformance testing to ensure keg conform to all recyclables mandates. P... View More

Laboratory needed for testing of safety belts to ANSI 10.14, American National Standard for Construction and Demolition Operations - Requirements for ... View More

SO/IEC 17025 Accredited laboratory needed for ECE Testing of Brake Pads to ECE 90 Standard,European standard for replacement brake pads and linings co... View More

Europe company needs microbiology laboratory for EN norm Efficacy testing of algaecide for application to water systems, such as swimming pools & spa... View More

Electronics Laboratory needed for fcc verification testing View More

Electrical Laboratory needed for UL Testing to UL489 Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit- Breaker Enclosures. and UL1077 S... View More

Performance laboratory needed for endurance testing for a 6 MVA transformer according to EN 50464-4, Three-phase oil-immersed distribution transformer... View More

Laboratory needed for certification testing for Herbal powder analysis View More

Laboratory needed for National Electrical Manufacturers Association NEMA testing two LED modules to the 2005 NEMA TS 4, section 5, Display properties... View More

Analytical Chemistry laboratory for FCC Testing of Beta Glucans tested by Food Chemicals Codex FCC monograph for a raw material (Bakers Yeast) View More

Textiles laboratory needed for MIL/BS Fabric Testing required for anti radar on fabric used for camouflage nets as per MIL/BS standards. View More

Environmental Laboratory needed OECD 310B testing of a new enzymatic detergent, along with a biodegradability certification for labeling conformance. View More

Ireland toxicology laboratory needed for mutagenesis testing of a pharmaceutical to an European Pharmacopeia (EP) Methods EP method View More

Physical Laboratory needed for Coupler Slip test as per IS 16172,REINFORCEMENT COUPLERS FOR MECHANICAL SPLICES OF BARS IN CONCRETE - SPECIFICATION View More

Materials laboratory needed for motorbike gloves testing to EN 388 (Abrasion, Blade cut, tear and punchar) EN 420, ( PH, value, Crom VI, and etc). Pl... View More

URGENT Materials laboratory needed for physical and microbiology ASTM testing of tape bituminous wrapping tape used in petroleum pipelines
Property ... View More

ILAC Mutual Recognition Signatory Laboratory needed for Electrical ageing testing for insulation piercing connector for LV arial bundle cables as per... View More

LONG-TERM TESTING: USA food laboratory needed for saffron testing to ISO 3632, Spices -- Saffron (Crocus sativus L.) View More

ISO 17025 Automotive laboratory needed for all Automotive charger testing such as EMC conformance, vibration, dimensional,
View More

Skin care company needs cosmetics microbiology laboratory for preservative efficacy tests on 9 skincare products to BP standards. Preservatives-Effec... View More

Bakery needs Canada Laboratory for nutritional testing of baked goods to ensure conformance with all Canadian food standards and are curious on pricin... View More

FDA third party laboratory needed for food contact substances validation testing. Validation of FDA requirement for consumer products (coffee mugs) View More

Spain Materials Laboratory needed for ASTM Testing to ASTM D471 and ASTM D413: Materials, mechanical (Polyurethane Layflat Hose for fuel transfer) MI... View More

FDA cGMP Medical Device Laboratory needed for ASTM Testing to ASTM D3492. Declaration of conformance with consensus standards. For FDA approval we n... View More

Materials Laboratory needed for mechanical testing: Average Bending Strength - AS/NZS2908.2- Density (oven dry) - AS/NZS2908.2- Watertightiness - AS/N... View More

Eastern USA Analytical Chemistry Laboratory needed for ASTM Testing, ASTM D1500, ASTM D2276 Color and Particulate concentration to be in conformance ... View More

USA A2LA ISO Automotives Laboratory needed for Radio testing using CAN ISO16845 test method. ISO 16845 provides the methodology and abstract test suit... View More

FAA Laboratory needed for testing Lighting Systems on Cargo Compartments of Aircraft To Ensure Conformance with Federal Aviation Regulations. View More

California FDA GMP Toxicology Laboratory needed for small molecule toxicity testing which will hopefully go to clinical study.

The non-clinical la... View More

USA Product Safety laboratory to test imported safety glasses to assure conformance to ANSI Z87.1-1989 View More

US Analytical Chemistry Laboratory needed for Green Seal Certification Testing for Conformance of cleaning solution to GS-37 See GS-37 (GS=Green Seal.... View More

California Electrical Lab needed for 1)Insertion Loss and Return Loss testing from 0 Hz to 3 GHz for COAX cable and connectors.
2) CAT5e conformance ... View More

GLP Metallurgical Lab needed for Testing of Zinc Sulfide for conformance to 21 CFR 73.2995. This includes identification by maximum phosphorescence, a... View More

ISO lab needed for ISO Conformance Testing of Product with available Standards. The Products are:
1)Rubber Back-up Pads
2)Cup Brush
3)Coated Abrasi... View More

Microbiology laboratory needed for bactericidal, virucidal, mycobactericidal and sporicidal efficacy disinfectant testing for validating a hydrogen pe... View More

Endocrine serum testing for a pharmaceutical clinical trial with a group of medical doctors and chiropractors. Including E2, E1, TSH, T3, T4, P4, Cort... View More