NEED LABORATORIES OR LAB SUPPLIERS?

ARE YOU A LABORATORY OR LAB SUPPLIER?

SUPPORT

Questions / Comments?
Call 1-855-377-6821or

Laboratory Requests

Most Recent pyrometric cone equivalent (pce) Laboratory Requests

Submit pyrometric cone equivalent (pce) Laboratory Requests

Contract Laboratory has received the following pyrometric cone equivalent (pce) Laboratory Requests which need to be fulfilled! These pyrometric cone equivalent (pce) Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their pyrometric cone equivalent (pce) Laboratory and Scientific Research. If you need a pyrometric cone equivalent (pce) Laboratory, please Submit a pyrometric cone equivalent (pce) Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

In Vivo Oxygen or Air Permeability

Pharmaceutical Company needs Laboratory for In Vivo Oxygen or air permeability test of a silicone based gel - ideally in vivo, but if not possible the... View More

Contract Sterilization Re-Usable Medical Components

Contract Sterilizer needed for contract sterilization of re-useable medical components. Qualified-Cycle or Validated-Cycle process for human use compo... View More

Pharmaceutical Gel Viscosity

FDA GMP Pharmaceutical Analytical Laboratory needed for viscosity testing on a pharmaceutical gel product using a cone and plate viscometer preferably... View More

ISO Medical Device Genotoxicity Testing

Toxicology Laboratory needed for ISO Genotoxicity testing a silicone part ussed in a medical application to ISO 10993
(Body contact: Tissue / Contact... View More

NF Monograph Dimethicone Validation Testing

LONG-TERM TESTING USA (preferrably Texas) Pharmaceutical Laboratory needed with validated method for NF Monograph Testing on Dimethicone 1000 cst flui... View More

Baby Suction Bowl Consumer Products Testing

USA Consumer Products Safety Laboratory needed for certification testing of baby product which is a set of 3 silicone suction bowls.

Can you pleas... View More

Silicone Gum Blend Evaluation

Cosmetics Clinical Research Laboratory needed for development of experimental study for evaluation of silicone gum blend for it's use as film former f... View More

Gac Fruit Oil Beta Carotene Testing

ISO 17025 Food Analytical Chemistry Laboratory needed for beta carotene testing in gac fruit oil sample (gac oil is diluted in coconut oil 50 times) f... View More

ISO Respiratory Medical Device Evaluation

Medical Device Laboratory needed for ISO evaluation of which medical device which comes under the respiratory devices category to ISO 5356 Anaesthe... View More

ICH Silicone Medical Device Shelf-Life Aging Study

Experienced Medical Device Laboratory needed for ICH shelf-life study of a medical device made of 100% Silicone. While we have a shelf-life for the ra... View More

FDA GMP Gene Therapy Lot Release

LONG-TERM TESTING FDA GMP Bioanalytical Laboratory needed for GMP method validation, product qualification and lot release testing of a gene therapy p... View More

FDA Food Grade Silicone Drinking Straws Testing

FDA Food Laboratory needed for testing of food-grade silicone drinking straws for any FDA requirements including ROHS, BPA, heavy metals, lead, pthala... View More

Cosmetics Ingredients

Cosmetics Anaytical Chemistry Laboratory needed for ingredient testing in liquid cosmetic product containing:
Alcohol Denat.
Aluminium Chloride PEG... View More

Coating Defect Identification

Materials Laboratory needed for FTIR microscopy analysis of coating defects, and determination of what the defect is. For example, if the defect is a... View More

Waterproof Medical Grade Adhesive Reformulation

PRODUCT DEVELOPMENT Laboratory needed for reformulation of a Medical Grade Adhesive to make it more waterproof while ensuring it is still safe on a... View More

Laminate Film Thermal Conductivity

Materials Laboratory needed for ASTM thermal conductivity measurements of laminate films to ASTM E1530, performed with a TA Instruments DTC-300 or equ... View More

Skincare Chemical Analysis

Cosmetics Laboratory needed for analytical testing of skin care product for Paraben, Sulphate, Silicone, Mineral Oil View More

Silicone and Graphite Purity

Third-Party Laboratory needed for purity and composition testing of two silicone and graphite samples for a breakdown of each of these samples, chem... View More

Pharmaceutical Deformulation / Reverse Engineering

Pharmaceutical Company needs Analytical Chemistry Laboratory for quantifying the inactive ingredients in a suspension formulation as part of a reverse... View More

Food Acrylamide Reduction Study and Conversion of Sugars in Milk

Food Laboratory needed for the following Food Research Studies to develop applications for the reduction of acrylamide in fried food products in bakin... View More

Child Dummy Clip Testing

Consumer Products Laboratory needed for child safety testing of silicone dummy clip to EN 12586 Child use and care articles. Soother holder. Safety re... View More

Pharmaceutical Excipient Analysis by Capillary Viscometer

URGENT / LONG-TERM TESTING - US FDA cGMP Pharmaceutical Analytical Chemistry Laboratory needed to analyse one of the excipient sample by Capillary vis... View More

Baby Teether Testing

CPSC Consumer Products Laboratory needed for product safety testing ofSilicone Teether products including teething rings. teething clips and teething... View More

Caramel Color Testing

Food Laboratory needed for caramel color testing for 1) 4-METHYLIMIDAZOL (P/P) % (EQUIVALENT OF BASIC COLOR ON) 2) ISOELECTRIC POINT 3) 2-ACETIL-4-TET... View More

Ventilator Testing

Medical Device Laboratory needed for ISO Testing on apparatus used on ventilator according to ISO 5356-1 Anaesthetic and respiratory equipment -- Con... View More

VOC Testing

Large Corporation needed for VOC testing of cloth adhesive tape using Toyota Method TSM0508G or equivalent.


View More

LONG-TERM TESTING US Automotive Laboratory needed for vendor supplier confirmation cleaning testing of parts used in pumps and turbines to ensure part... View More

Pharmaceutical Analytical Chemistry Laboratory needed for stability study testing on Silicone Dioxide (SIO2) View More

Medical Device laboratory needed for CE Mark biomechanical testing of silicone liners for lower limb prostheses (amputees) to
ISO Standard 10328:200... View More

Toxicology laboratory needed for USP biological reactivity testing of rubber and or silicone used in pharmaceutical products to USP 6, Plastics Test View More

Cosmetics laboratory needed for authoritative analysis of the free ammonia content of a cosmetic hair dye product to EU, FDA or equivalent government ... View More

Consumer products / textiles laboratory needed for polyester textile fiber testing for silicone composition. View More

Importer needs consumer products laboratory for FDA safety testing of silicone adult toys to ensure material meets all US safety requirements. View More

LONG-TERM TESTING Materials laboratory needed for ASTM & FED-STD textiles testing for non-fibrous and soluble materials content using soxhlet extracti... View More

Polymer laboratory needed for nondestructive NDT Testing: heat resistance testing of an acrylic lens according to IWA MIL-PRF-5425. Also, need physica... View More

Consumer product (textiles) laboratory needed for ASTM antimicrobial testing on textiles to ASTM E2149 or ISO, BS, AATCC equivalent View More

NABL materials laboratory needed for rubber rheology testing of optimum cure time & temperature of a liquid silicone rubber using a rheometer. View More

Materials laboratory needed for ASTM testing of freestanding 50um plastic films for yellow index ASTM E313 or equivalent and index of refraction ASTM ... View More

Food laboratory needed for sugar syrup testing for rheology studies for analyzing surface tension, viscosity and elasticity profiles for various sugar... View More

Contract laboratory needed for WHO NORMS testing of mosquito repellent fabric Cage Test, Cone test, Mosquito repellent behavioural test as per WHO NOR... View More

Physical chemistry laboratory needed for quantitative structure activity relationships (QSAR) analysis of cosmetics containing silicone. View More

URGENT. Looking for pharmaceutical/clinical lab for analyzing swab samples collected from stainless steel bench after cleaning procedure for an API Si... View More

Large manufacturing company needs testing of Sealants (Silicone/PU/Acrylic) used in building and construction to comply with ASTM standards (ASTM C920... View More

FDA cGMP pharmaceutical Laboratory needed for viscosity testing: Magnesium Aluminium silicate. Sample solution: After determining the Loss on Dryin... View More

Oil laboratory needed for Fuel testing on a pump-grade gasoline: all tests need to be ASTM certified: Ethanol, Benzene, Total aromatics, oxygen, olefi... View More

Bioanalytical laboratory needed for biologics testing for residual simethicone from antifoam treatment in fermentation process for biological product ... View More

Materials laboratory needed for IEC and ASTM Testing of insulators (several tests) : ASTM C177: Standard test method for steady-state heat flux measur... View More

Electrical laboratory needed for static electricity testing for carpet tile to AATCC-134. The requirement is antistatic less than 3.58kV permanent con... View More

Analytical chemistry laboratory for product testing to ensure Latex free and Silicone free View More

Chicago area analytical chemistry laboratory needed for AOAC testing for peroxide on vegetable oils using AOAC 965-33 or equivalent method in the Chic... View More

Medical Device Company needs medical technology laboratory for packaging/ product /development of developing a disposable medical cable assembly that ... View More

ISO certified Medical Device Laboratory needed for Bio feedback system testing to 60601 CB Scheme. Possible FCC (and equivalent for EU, Japan, Brazil) View More

Electrical company needs Laboratory needed that can certify that material shipments are checked for gamma radiation using a Ludlum model 19 Micro-R Me... View More

Laboratory needed for ISO new product development testing. Acoustics Laboratory needed for Noise/Sound level test of new table frame to ISO 3744: 2010... View More

Contract Medical Device Laboratory needed for FDA Testing of endotracheal tubes (ETT) to FDA recognized standards.

? ISO 5356-1 (2015), Anaestheti... View More

Laboratory needed for National Electrical Manufacturers Association NEMA testing two LED modules to the 2005 NEMA TS 4, section 5, Display properties... View More

Analytical chemistry laboratory needed for deformulation testing of a lubricant, the lubricant is comprised of 4 ingredients (dimethicone, dimethicon... View More

URGENT Materials laboratory needed for testing to ASTM F2466-10, Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transpor... View More

Africa nutritional laboratory needed for nutritional testing for
nutritional data for canned food finished product for export of canned food to Eur... View More

Skincare company needs analytical chemistry laboratory to test unrefined shea butter.
(1) Saponification value of 185 to 195,

(2) Iodine value of... View More

Analytical Chemistry Laboratory needed for purity analysis on liquid sample of 4-methyl-5-nonanone ~10% and 4-methyl-5-nonanol ~90% by capillary chrom... View More

Europe analytical chemistry laboratory needed for hands and nails cream testing for ingredient testing for import to the US.

Ingredients: AQUA,... View More

Medical Device Laboratory needed to perform a test that will measure the volume (or amount) of a gas which flows out from a bag made of silicone rubb... View More

EU or USA Food Safety Laboratory needed for Food Contact Materials FCM safety testing of silicone baking tray to see if it meets EU and/or FDA regul... View More

Australia Registered and Accredited Microbiology Lab needed for Honey Total Antibacterial Activity. The activity is measured using Staphylococcus aur... View More

USA Pharmaceutical Laboratory needed for Simethicone assay in raw material By FTIR View More

Materials Laboratory needed for required Filter Testing (Directly from US Code of Federal Regulators, 40 CFR Part 50 Appendix L,Reference Method for t... View More

Materials Laboratory needed for Cone calorimetry studies View More

California Materials laboratory needed for ASTM rheology Testing to determine levels of cure in samples of liquid silicone rubber to ASTM D6601-12, S... View More

Children's consumer product safety laboratory needed for testing pacifier clip to be tested for use and abuse test. It has silicone beads and want to ... View More

Europe bioanalytical laboratory needed for European Pharmacopoeia and EMEA testing of pollen extracts. These lyophilized extracts are actually the raw... View More

Contract labs needed toperform compression testing according to a similar testing standard IFDC S-115 & IFDC S-107. Looking to receive a quote for si... View More

Large Pharma needs Laboratory for viscosity testing method development / assessment of ointment product that required viscosity testing using Rheomete... View More

Pharmaceutical analytical chemistry laboratory needed for Viscosity measurment testing of very viscous gel with cone plate viscometer or other techniq... View More

USA Materials laboratory needed for automotive standards testing of 3 different film materials on an automotive standard (MS 373- 12). Gasoline Non-le... View More

Laboratory needed to quote for analysis of appx. 1 oz. of silicone based fluid: chemical composition (quantitative) analysis to a standard and industr... View More

Microbiology laboratory needed for personalcare product testing of essential oil personalcare product in foiled sealed packages. Tests for Aroma, Text... View More

Environmental Laboratory needed for soil testing for food dye: Red Food Dyes (hydrophobic) Sudan IV type or equivalent. 50 soil samples needing this ... View More

Midwest USA Food Laboratory needed for waffle cone testing to guidelines of City of Chicago, to obtain a cottage food license to state it is Not Pote... View More

Preclinical COntract Research Organization needed for preclinical studies and biocompatiability testing of medical device implant: implantable membran... View More

Large Automotive Manufacturer needs USA Materials Laboratory for silicone material testing: 0.625" x 1.25" Rectangle Extrusion 30-40 Duro Black Sil... View More

Germany materials laboratory needed for ABNT and ASTM Testing: Routine test for galvanized material according ABNT (Brazil), standards, or you can pr... View More

Large Oil Company needs Oil Laboratory for FT-IR measurements. I was wondering what the costs and time schedule would be for those measurements. We a... View More

Asia or Europe materials laboratory needed for EN and DIN Testing Please confirm if you can give test or equivalent for High Pressure Laminate in 5-10... View More

US FDA GMP laboratory needed for Quality Control . testing for color test Capable of running a color test using a colorquest xe or equivalent instrum... View More

Australia Analytical Chemisty Laboratory needed for OECD Testing to OECD TG 104 or equivalent: Vapour Pressure of an organic liquid at 25°C, I underst... View More

India Certified Biochemistry laboratory needed for medical grade silicone testing. View More

Protective Product Manufacturer needs analytical chemistry laboratory for formulation development studies. At the moment we are focused on working ou... View More

Silicone hose manufacturer needed for raw material testing to SAE J2979. View More

Independent, accredited Plastics Laboratory needed for plastics testing: failure analysis of sealant material for failure on site that might be struct... View More

India Medical Device laboratory needed for medical device certification testing: certify Medical grade silicone products for implants and other uses(b... View More

Petrochemical firm needs middle east plastics materials laboratory for ASTM Testing 2 samples of PET polymer granules to ASTM D5511-02 Standard Test ... View More

Food Laboratory needed for formulation of silicone base food release spray to be used in equipment like waffle bakers. View More

Asia Plastics Laboratory needed for Plastics Testing to BS EN1746: EMSD gas authority not allow due to MS2086 which is equivalent to BS EN1746 is not... View More

India Materials Laboratory needed for ASTM Standard Testing for Physical properties of Flurosilicone and silicone. Properties are Heat aging, low temp... View More

USA, Canada analytical chemistry laboratory needed for ICH USP Stability Testing. ICH USP Finished product stability testing on liquid sample of ionic... View More

USA EPA Laboratory needed for VALAP Certification Testing: Btu testing of #2 fuel oil (EPA Method D240 or equivalent) - prefer Northern Virginia locat... View More

Plastics Laboratory needed for ASTM Testing of Polyethylene lined material to establish various measures. 1. Physical tests? a. Hardness test (ASTM D ... View More

Israel, USA or China plastics laboratory needed for glass fiber testing: Silica Glass Fiber Cord
Polyethylene terephthalate fiber
Silicone covered F... View More

USA Physical Chemistry laboratory needed for particle analysis: Quantitate particles, including silicone oil, present in prefilled syringes filled wit... View More

USA Consumer Products Laboratory needed for consumer products testing of silicone bands for BPA, as well as lead in the printing on the bands to see i... View More

Middle East Oil Laboratory needed for ASTM Testing: fuel testing, oil testing and natural gas analyisi Distillate Oil -ASTM D 240 Heat of Combustion ... View More

FDA cGMP analytical chemistry laboratory needed for analytical LC method to extract active dimethicone from a cleansing lotion matrix to be quantitat... View More

South Sudan geotechnical laboratory needed to Conduct geotechnical investigation at Kidepo bridge site to deternmine the nature and characteristics of... View More

Asia Electrical laboratory needed for UL 508 or IS/IEC testing of Low Voltage Disconnector used in telecom SMPS application. These single pole dc cont... View More

Europe FDA GMP analytical chemistry laboratory needed for FDA and USP testing to USP class VI test on silicone hoses. View More

Plastics laboratory needed for ASTM Testing of 7-8 samples of vinyl sheet piling. Tensile strength, IZOD impact, transmissivity and equivalent permea... View More

India analytical chemistry laboratory needed for gas chromatography testing of dimethicone View More

Europe Environmental Laboratory needed for air testing. Four samples of passive air sampling
CO
CO2
SO2
NOx
O3
VOC
HAP
Heavy metals
Dust
... View More

Canada or USA Clinical Toxicology Laboratory needed for urine testing of Urine control solutions to be quantified for various drugs of abuse concentra... View More

USA Analytical chemistry sensory laboratory needd for reverse engineering of a human biologic scent and felt that we have to analyze the sample, rever... View More

Europe, US, Canada biomechaical Laboratory needed for ISO testing: mechanical testing in mammary implants filled with silicone gel According to ISO 14... View More

USA AOCS ISO Oil Laboratory needed for ASTM Testing Hydroperoxide testing in diesel and biodiesel fuels to ASTM D6447, ASTM D3703, or AOCS/ISO equiva... View More

USA bioanalytical laboratory needed for IL-1, LDH screening tests using skin equivalent inflammatory markers IL-1a, LDH to screen topical formulations View More

Europe materials laboratory needed for fire retardancy testing to eu standard B1nous sommes confectionneurs de tentes et chapiteaux. je vous sollicite... View More

IALA Aerospace Laboratory needed for IALA certification testing of Aviation Airfield Markers & Cones.
We would like to test the point of breakage, an... View More

California FDA GLP bioanalytical laboratory nad toxicology laboratory needed for GLP Testing: Extraction of hydrogen peroxide from silicone test sampl... View More

uSA Consumer Products Laboratory needed for Consumer Products Testing. CSPA Testing to CSPA Methods:(or equivalents)
DCC-11, DCC-09, DCC-17, DCC-16 View More

Europe or USA Certification Laboratory needed for certification testing of workwear to certify products for the American market to equivalent standard... View More

Canada Food Packaging Laboratory needed for CONEG Testing: Heavy Metals Testing View More

Plastics Laboratory needed for DIN Testing or ASTM Testing for properties of polyisocynate

NCO Content,
Non-volatile content
Viscosity at 23°C ... View More

Food Laboratory needed for flavor testing for Thaumatin
Neohesperidin dihydrochalcone
Narinigin dihydrochalcone
View More

ISO, FDA GMP Analytical Chemistry Laboratory needed for formulation testing to develop a formula for personal lubricant. Water based and silicone base... View More

USA Microbiology laboratory needed for DNA based microbial identification testing services like Micro-Seq or equivalent View More

India Mechanical Laboratory needed for DIN Testing Test Details: Specification - Equivalent to DIN 50018 The test duration of Saturated SO2 test is 3-... View More

Nuclear Science Laboratory needed for RESIDUAL RADIOACTIVITY LEVEL TESTING OF HOLDERS FROM EACH LOT SHALL BE CERTIFIED TO CONTAIN LESS THAN 1.0 PICOCU... View More

Pune analytical chemistry laboratory for Pyrolytic distillation of rubber based sealer(paste)& FTIR analysis of distullate for presence of SILICONE View More

USA FDA GMP Preclinical Laboratory needed for Substantially equivalent evaluation in simulated use test for common human blood analytes collected from... View More

Australia Toxicology Laboratory needed for medical device testing 1. Cytotoxicology test 2. Intradermal irritation test The medical device I would req... View More

Electrical Certification Laboratory needed for Induction Cooker testing. Any international accredited electrical appliance testing laboratory which ac... View More

Australia Microbiology Laboratory needed for total antibacterial activity testing for Honey includin Determination of honey activity by Bioassay metho... View More

West Coast USA FDA GMP Packaging Laboratory needed for FDA Packaging Testing of Paper Packaging
1. Extractables
2. Biological
2. PAH,pcb, pesticide... View More

Acoustics Laboratory needed for safety rating testing of earplugs (silicone) rated for hearing protection. Do you do this type of testing. If so, wha... View More

USA materials laboratory needed for ongoing residual testing to Quantitate RESIDUAL D3-D20 Cyclics to the ppm level in Silicone samples on an ongoing ... View More

Electrical laboratory needed for EC Testing: Konu: Cable issues
Tarih: Tue, 9 Aug 2011 04:42:35 +0000
Kimden: Imran Aslam Khokhar View More

India preclinical laboratory needed for Maxillofacial Silicone subjected to artificial aging. View More

Europe mechancial and materials laboratory needed for ASTM TEsting RTV silicone testing to ASTM 412a and ASTM 624c:
1. tensile test (ASTM412a), 30 sa... View More

Oil Laboratory needed for biofuel testing to have a comparison done with the same equivalents of petroleum based fuels View More

FDA GMP analytical chemistry laboratory needed for ingredient testing of nail polish: % Ethyl Acetate. butyl Acetate, Cellulose Acetate Butyrate,nitro... View More

Sacramento, CA Plant Biology Laboratory needed for testing:
Leaf chlorophyll a + b
Leaf equivalent water thickness
Leaf protein content
Leaf cellu... View More

EP/USP Bioanalytical Laboratory needed for Simethicone defoaming activity test according to European pharmacopoeia or USP View More

Analytical Chemistry Laboratory needed for GC-MS testing, perfume product development for perfume research, product development, reverse engineering ... View More

US/Canada FDA Consumer Products Safety Laboratory needed to confirm silicone cookware meets FDA requirements for rubber with repeat exposure to food. ... View More

Canada AE/FAA Laboratory needed for Flammability Testing of Transport Canada CAR 525.853 Part IV (Heat Release) and Part V (Smoke density.
4 samples ... View More

Electrical/Mechanical Laboratory needed for dielectric constant and strength testing. Sample Configurations (1 sample of each tubing type):
1) Sili... View More

India Analytical Chemistry Laboratory needed to de-Formulate a silicone compound with Vinyl terminated Diphenylsiloxane - Dimethylsiloxane as a base p... View More

FDA GLP GMP analytical chemistry laboratory needed for silicone testing, indirect weight measurement of silicone on a product. Weigh product, apply s... View More

Clinical Contraact Research organization CRO needed for clinical study of silicone bracelets are embedded with no less than 1000 negative ions. I have... View More

USA Analytical Chemistry Laboratory needed for testing by GC-MS spectra for 5 pure standards of chemical CofA
-fast turnaround needed

Preferred An... View More

Canada (<40km from Burnaby) Rheological Laboratory needed for ODR Rheometer testing on Liquid Silicone Rubber to produce results and graph torque vs. ... View More

New Jersey FDA GMP Laboratory needed for USP testing Simethicone Emulsion for USP-ID, Assay and Defoaming Activity View More

USA/Europe IEC Electrical Laboratory needed for IEC testing to IEC 61643-11 standard or equivalent to get the test report / certificate for the Ref. View More

Hong Kong ISO Materials Laboratory needed for testing safety vests as follows:
1. Testing to CSA Z96-09 standard.
2. Testing to ANSI/ISEA 107-2010... View More

USA/Canada EPA Analytical Chemistry Laboratory needed to test crude oil samples for Hg, Sb, As, Be, Cd, Cr, Co, Pb, Mn, Ni, Se as per EPA requirement,... View More

India Electrical Laboratory needed for IEC testing: tracking and erosion testing on silicone composite insulators according to IEC:61109 for 1000hrs. ... View More

India ASTM Materials Laboratory needed to test our specialty coatings/paint for fire retardant characteristics based on ASTM D 1360 or some other equi... View More

ASTM Microbiology Laboratory needed for testing as follows:
1. ASTM D5526 (anaerobic microbe test) - four tests.
2. ASTM D6400 (or equivalent aerob... View More

Hong Kong Analytical Chemistry Laboratory needed for GPC molecular weight analysis of silicone polymers View More

ASTM Laboratory needed to conduct the following tests on a hydrocarbon sample (liquid):
ASTM E 162: Flame Spread
ASTM D 93: Closed Cup... View More

Preclinical Contract Research Organization required to quantify how much silicone is deposited on hair from shampoos; there are 4 shampoos to be test... View More

Clinical Laboratory needed for simethicone testing of Blood Sample For The Quantity of Simethicone. Quantity of Sample Required? View More

Canada FDA, ISO laboratory to conduct bio-compatibility testing (FDA and ISO 10993 testing) for EO sterilized silicone and acrylic permanent implants ... View More

FDA GMP Agriculture laboratory needed for testing ultrasound probe can be applied to the skin of pork carcasses during processing. The housing of the... View More

Analytical Chemistry Laboratory needed for testing AA in PET using ASTM F-2013-05 or functional equivalent. Testing purposes are to establish validity... View More

USA Materials Laboratory needed for SVHC Testing, SG 2302 CHR#633
UHMW CHROLASTIC SILICONE ADHESIVE TAPE


View More

ILAC Laboratory needed for ASHRAE Testing of HVAC products for preformance to ASHRAE 70 We have to have test results of our diffusers(HVAC products) ... View More

Analytical Chemistry Laboratory needed for ASTM Testing, ASTM F-2466. Determining silicone volatiles in silicone rubber for transportation application... View More

Analytical Chemistry laboratory needed for Chemical Analysis on 3 Compounds: Analyze "Dysport" and another
compound said to be equivalent.
Dyspor... View More

Illinois Analytical Chemistry Laboratory needed for ASTM E-11 Particle size testing, dry sieve. Determination of the weight of residue remaining on a ... View More

Environmental Laboratory required for Biodegradability Testing of vegetable oil based products (poorly water soluble) according to OECD 301F or equiva... View More

Canada, Def Stan 00-35 Test Procedure B Severity B, Laboratory needed to simulate flight conditions. Test chamber must be able to maintain a temperatu... View More

USA REACH Analytical Chemistry Laboratory required for screening for 15 SVHC compounds. We have one sample which is an emulsion of silicone & organic ... View More

ISO Preclinical Contract Research Organization required for the following antibody titre assays-serum and colostrum:
(1) rotavirus (hemagglutination ... View More

INDIA FDA USP CLASS 6 BIOANALYTICAL LABORATORY REQUIRED FOR BIOCOMPATIBILITY TEST OF SILICONE View More

USA AOCS Cd 16b-93 or equivalent Analytical Chemistry required for Solid Fat Content for vegetable oil
Total volume of sample availabe is less than 5... View More

Pakistan and India UKAS/ISO or equivalent Bioanalytical Laboratory required for fat analysis:extraction-soxhlet method on crushed cattle bone View More

GMP/USP Bioanalytical Laboratory required for stability indicating assay for dimethicone in a topical finished product View More

Asia/USA/Canada FDA Biomedical/Mechanical Laboratory required for testing AS5356-1:2004 Anaesthetic and respiratory equipment - Conical connectors: Pa... View More

South-Eastern USA Rheology Laboratory required for Viscosity(cone and plate)rheological testing. Currently we use a HAAKE VT550 and PK100d cone and pl... View More

USA Clinical Laboratory required to test components in human serum plus citrate conentration.
Total protein, Albumin, IgG, Choresterol, Total Lipid (... View More

Europe EN14476 or equivalent Microbiology Laboratory required for Disinfectant efficacy testing (suspension test) against flu viruses (e.g. H1N1 swine... View More

Florida Analytical Chemistry Laboratory required for HPLC analysis. I have a control and sample of 3 different stains used to perform Hematology tests... View More

Nearby Germany (would prefer A2LA) Acoustics Laboratory required for Sound Transmission Loss Testing ISO 140-3 or ASTM E-90 equivalent View More

USA Electrical Laboratory needed for testing Burst Pressure for vinyl/silicone tubing, Dielectric Strength for silicone tape View More

CA cosmetics analytical chemistry laboratory needed for formulation of scented oil, cyclomethicone based liquid fragrance with a fine glitter or silic... View More

Toronto Analytical Chemistry Laboratory needed to test silicone gel for dielectric strength and constant View More

Canada Biomaterials Laboratory needed for Biocompatibility testing of silicone rubber compound European Pharmacopeia 3.1.9
ISO 10993 Section 5,6,10,1... View More

USA Metallurgical Laboratory needed or ASTM F-543 Testing of facet screw will be thread 5mm diameter and a lenght of 40mm made out of medical grade Ti... View More

Plastics and Polymers Laboratory needed for radiopacity testing on silicone wound drains. Testing is to be performed on each production lot, ongoing b... View More

USA Materials Laboratory needed for Material Characterization - Phase Morphology of a coating applied to a silicone substrate. Specifically, character... View More

Florida Pharmaceuticals Company needs USA Laboratory for "complex viscosity" testing, for one of our silicone materials (Pressure Sensitive Adhesive) ... View More

Europe ISO 17025 Analytical Chemistry Laboratory required for a diesel equivalent fuel to be tested for EN 590 compliance. View More

USA Analytical Chemistry, Mechancial Laboratory needed for temperature, frequency, and strain testing of 600,000 cSt silicone fluid. One sample is ne... View More

Europe, France/Germany FDA, ISO, ASTM, GLP or equivalent Pharmaceuticals Microbiology Laboratory required for Large Volume Microbial Ingress test meth... View More

JEDEC 51-2 Electrical Laboratory required for testing Thermal Resistance of Heat Sinks. The objective is to benchmark the thermal performance of our ... View More

Canada ASTM or equivalent accredited Analytical Chemistry Laboratory needed to perform flash point testing down to -50 degrees Celsius View More

Europe FDA, GMP materials laboratory needed for plastics testing, we need to check if the material complies with FDA requirements (mainly PVC and sili... View More

Jinhua, Zhejiang China USP Chapters 643, 645, 85, 1231, or equivalent Environmental Laboratory needed for testing RODI water system, routine monitorin... View More

PA USA Analytical Chemistry Laboratory needed to do Vapor pressure @ 0.5 torr test for hydrocaron oils, silicone oils. View More

USA FDA, GMP, GLP Bioanalytical Laboratory needed for testing Herbs -ICP/MS (or equivalent, PPB limit)for heavy metals (lead, cadmium, mercury)
Pesti... View More

Ohio ASTM D5511 or equivalent Environmental Testing laboratory needed for biodegradability View More

USA Laboratory needed for Tensile testing of silicone elastomer sheets (0.03
thick) at body temperature. Based on engineering strain. Loading and un... View More

Analytical Chemistry Laboratory needed to analyze a gas sample which is primarily air (Oxygen, nitrogen, argon) with small traces of the following pot... View More

Analytical Chemistry Laboratory needed for testing for trace amounts of:
Acetone,
Ethylene Glycol (CAS #107-21-1),
Darocur 1173 (CAS #7473-98-5)(2-... View More

Europe analytical chemistry laboratory needed for API Testing for Chemical composition (C, Mn, P, S, Cr, Ni, Cu, Mo, Nb, Si, Ti, V), including Carbon ... View More

Materials laboratory needed for analysis: EN 12192-1 Products And Systems For The Protection And Repair Of Concrete Structures - Granulometry Analysis... View More

Toxicology Laboratory needed for RIIF Testing: Skin Irritation Data Skin Sensitization Data
Ocular Irritation Data
Mutagenicity Data for Testing ICM... View More

USA or Canada Environmental Laboratory needed for Biodegradability - OECD 301A-F, 310 or equivalent, on detergents, cleaning fluids View More

Environmental microbiology lab needed for ISO 8192 (OR EQUIVALENT): "method for assessing the inhibitory effect of a test material on the oxygen consu... View More

North America/Canada or Europe FDA cGMP analytical chemistry laboratory needed to perform Dimethicone assay by current NF standards View More

SW846 6020 ICP/MSXRF or equivalent USA lab needed for analysis of solid matrices (Coal, Soil)for Uranium. View More

BS, OSP or FDA UK laboratory needed for product safety testing of a silicone sealant in contact with foodstuffs. View More

EXTREMELY CONFIDENTIAL: Rheology lab needed for testing with Cone-plate or plate-plate rheometer. Shear from .01 to 1 second^-1; viscosity range fr... View More

Materials lab needed for ASTM Testing for Ash Content per ASTM D4574 and Consistency per ASTM D217 for Thermal Barrier, Silicone, Aramid Filled Tape (... View More

FDA GMP Laboratory needed for testing for Claims Substantiation and Safety to FDA and Japanese equivalent. View More

Toxicology laboratory needed for either EU product safety testing: 48hr or 96hr skin irritancy or in vitro testing equivalent on a cosmetic lotion con... View More

Analytical Chemistry laboratory needed for ASTM F2466-05 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Ap... View More

Food Analytical Chemistry laboratory needed for polydimethylsiloxane analysis which can be conducted using GC-MS. The methodology is based on Standar... View More

Biomedical lab needed for the following ASTM testing:

1.) ASTM F2101-01 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BF... View More

Analytical Chemistry Laboratory needed for Transformer Oil Testing Silicone Content & Water Content of Transformer oil (Voltesso 35) View More

Metallurical laboratory needed for nondestructive weld verification testing of titanium cone to varify it is still the same as the parent metal.. what... View More

Analytical Chemistry Laboratory needed for transmission electron microscopy TEM analysis of polyethylene. A small piece of the polyethylene sample wi... View More

Preclinical laboratory needed for preclinical pharmacology NCE screening using a rat model of respiratory depression. Must be able to use Buxco (or e... View More

Mechanical laboratory needed to confirm that two resins are equivalent in Mechanical and Chemical Poperties. Information may be used for FDA submissio... View More

FDA GMP Food packaging laboratory needed for LMBG and DGCCRF certification testing for Food handling products made of a pure silicone product for food... View More

Analytical Chemistry Laboratory needed for ASTM D6751, UK EN testing of Bio-Diesel:

a) Minimum quantity required for testing
b) Cost of testing
... View More

Analytical Chemistry Laboratory needed for ISO Testing of silicone oil View More

Mechanical laboratory neeeded for testing according to standard PSA (Peugeot) Matrices: Braidings tubular,
glass fibre + silicone (see Doc. in enclos... View More

Materials laboratory needed for MTL testing of silicone baking molds View More

FDA GMP or GLP contact laboratory for quantitation of simethicone residue level in biopharmaceutical fermentation broth and in-process samples. View More

Histology laboratory needed for cryomicrotome of 1mm samples of silicone rubber need to be cut into sections on a cryomicrotome (-80oC) and placed on ... View More

Electrical laboratory needed for UL 508 or IS/IEC testing of Low Voltage Disconnector used in telecom SMPS application.

These single pole dc conta... View More

Analytical Chemistry Laboratory needed for US EPA Volatile fatty acids testing in ambient air by USEPA Method TO-17 or equivalent. View More

Materials laboratory needed for identification testing for the source of the silicone deposits found in customer's marketpulp samples and in their pul... View More

Analytical Chemistry Laboratory needed for Elemental analysis testing of silicone grease - particularly interested in a semi-quant analysis of Pt. View More

FDA GLP preclinical laboratory needed for Immunological testing for medical device (Apligraf-allogeneic living skin equivalent) for a Clinical Trial View More

Food analytical chemistry laboratory needed forASTM testing Fish Oil Sample for probable of "pump oil", i.e. silicone oil. View More

Materials laboratory needed for Reflectance Testing of cured coatings of glossy black shall be tested for reflectance per the following requirements: ... View More

Clinical laboratory needed for profilometry services done on about 75 silicone estamer molds for Acne scar resolution on silicone molds. These molds ... View More

Biopharmaceutical company needs analytical chemistry laboratory for testing for Tungsten and Silicone in the drug product stored in an prefilled syrin... View More

Bioanlaytical laboratory needed for
several skin equivalent samples already fixed in 10% formalin to be processed for H&E staining on glass slides an... View More

GLP toxicology laboratory needed for product safety testing: in vitro eye irritation using a tissue equivalent such as a human corneal tissue construc... View More

Physical laboratory needed for ASTM testing ASTM D6751 Biodiesel testing suite. Also
ASTM D93 - Flash Point
D2709 - Water & Sediment
D445 - Kinemat... View More

Analytical Chemistry laboratory needed for USP testing of Dimethicone View More

Bioanalytical laboratory needed for ASTM Close Cell Content Testing for Rigid Polyurethane Foam to ASTM D 2856 OR equivalent View More

Analytical Chemistry Laboratory needed for Rancidity Testing. Preferably using the Brinkman Rancimat or equivalent to determine suseptibility. View More

EPA metrology laboratory needed for testing SO2 monitor to certify it as an EPA equivalent method. View More

USA Product safety laboratory needed for toxicity testing of Testing on a silicone based product. View More

Large multinational corporation needs accredited (A2LA, NADCAP or AS9100)laboratory in California for testing silicone compound: 1. Youngs Modulus in... View More

Disinfectant Testing. Require testing of compound to TGA54 (Australian standard) or US equivalent of disinfectant compound.
Testing required against... View More

Analysis of a c10-c13 hydrocarbon per:
ASTM D1209;ASTM D2503;ASTM D4052;ASTM D1218;ASTM D971;ASTM D93A;IP170;ASTM D445;E681;ASTM D5191;ASTM D2624;AST... View More

Require a Oxford Lab-X 2000 or equivalent XRF ED equipment for determination of S & Ca in metal working fluids for quality assurance purposes. Energ... View More

US Pharmacopoeia anti-microbial preservative effectiveness study or equivalent: Microbiological assay and microbiological challenge testing. Testing ... View More

Drug stability
Storing drug in a device and testing for the leeching of silicone into the drug solution as well as the drug solution absorbancy into... View More

dimethicone or other silicone-based chemical quantitation in a protein-based pharmaceutical product. View More

Full OTC active ingredient testing for sunscreens, acne products, dimethicone, etc to USP, AOAC, FDA validated methods for:
Zinc Oxide
Titanium Diox... View More

simethicone testing (10 to 100 PPM) View More

Textile Water Spray Repellency Testing with Bundesmann rain spray texting of Textiles. The Test procedure is ISO 9865-1991. An equivalent test proce... View More

residual siloxane (dimethacone) for pharmaceuticals (< 1ppm or lower) View More

We are a PR firm with a client that manufactures an aerosol equivalent to egg wash. The product contains no egg ingredients and is used in commercial... View More

Subchronic toxicity, implantation and carcinogenicity. Material (fluorosilicone oil) to be used in long term implantable device (brain valves) View More

unknown protocol, however we need to determine the exact percentage of silicone in the mixture within 5% or less. Also would like to know the freshnes... View More

Expose silicone balloons to a chemotherapy drug bath while undergoing in vitro conditioning (48 C for 14.5 days).
Drug must also be infused through c... View More

Middle East Materials Laboratory needed for analysis of Natural Gas:
- Composition Analysis (ASTM D 1945)
- Natural Gas Lower Heating Value Anal... View More