NEED LABORATORIES OR LAB SUPPLIERS?

ARE YOU A LABORATORY OR LAB SUPPLIER?

SUPPORT

Questions / Comments?
Call 1-855-377-6821or

Laboratory Requests

Most Recent method development Laboratory Requests

Submit method development Laboratory Requests

Contract Laboratory has received the following method development Laboratory Requests which need to be fulfilled! These method development Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their method development Laboratory and Scientific Research. If you need a method development Laboratory, please Submit a method development Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Automotive FORD Test Method Testing

Automotive Laboratory needed for FORD Test Method WSS-M9P10-B testing for:
Corrosion resistance
Fluid resistance
Resistance to cleaning agents
... View More

Cosmetics Test Method Development

Experienced Microbiology Laboratory needed for research study to develop new cosmetics microbiology test method . One of the most important parts of ... View More

Disinfectant Virucial Efficacy Testing

Microbiology Laboratory needed for Virucidal efficacy testing of disinfectants against African Swine Fever Virus as per the following test methods:
A... View More

Cement Water Soluble Chromium

Construction Materials Laboratory needed for cement testing for determination of the water-soluble chromium (VI) content of cement as per European tes... View More

Wastestream Testing

Environmental Chemistry Laboratory needed for waste stream testing to Test Method 1030 - Ignitability of Solids View More

Coating ASTM Accelerated Weathering

Materials Laboratory needed for ASTM accelerated weathering performance testing of exterior coatingas per ASTM test methods. View More

OECD Biodegradability Testing

Asia Laboratory needed for OECD biodegradablity testing on dyestuff and chemical product using OECD Test Method Method OECD 302B or 301 A-F PRINCIPLE... View More

Radar Test Facility Testing

BUDGET APPROVED Telecommunications Laboratory needed for Radar Testing: W-Band using Test method: over the air (Mil-PRF-53134, radar part: 4.4.2.4). R... View More

USP Zinc Oxide Testing

Pharmaceutical Laboratory needed for USP testing of Zinc Oxide USPfor

Assay (IC method)
Identification B (Peaks in Assay match)
Loss on ignitio... View More

Zioconia Beads Testing

ISO/GLP certified Contract Laboratory needed either in EU or US for the following Analytical testingon Yttrium-stabilized Zirconia beads of 300micro... View More

ISO Saffron Testing

Food Laboratory needed for ISO testing of Saffron to ISO 3632-2:2010 Spices -- Saffron (Crocus sativus L.) -- Part 2: Test methods View More

Lipstick Prototype Development

START-UP PRODUCT DEVELOPMENT Start-up cosmetics company needs a color cosmetics chemist laboratory to create prototype lipstick for my company. View More

New Product HPLC Analysis

Independent Analytical Laboratory needed for HPLC analysis on a new product. We have performed analysis but would like a independent laboratory to con... View More

Carbohydrate Resistant Starch

Food Laboratory needed for determination of resistant starch in carbohydrate foods.
Please submit response with the method and the cost.
View More

ASTM Lube Basestock Testing

ISO 17025 Oil Laboratory needed for ASTM testing of lube basestocks to ASTM D7419
Standard Test Method for
Determination of Total Aromatics and Tot... View More

Spirits Beverage Accelerated Shelf-Life Testing

Beverage company needs USA Food Laboratory for accelerated shelf-life testing of blended spirits product to allow a late summer launch. This is a firm... View More

Skincare Flash Point and Boiling Point Testing

Cosmetics Company needs Analytical Laboratory for flash point method/ testing and boiling point testing for skincare products. View More

Petroleum and Fuel Vapor Pressure Testing

Small chemical company looking for USA Oil Company for vapor pressure testing on petroleum and alcoholic fuel blends. ASTM D323 or OECD Method 104 (or... View More

Chitin or Chitosan Testing

Mainland USA Analytical Test Laboratory needed for chitin or chitosan testing within a sample.
Please provide method, cost, any lead time and turn a... View More

Lubricant Po; Testomg

North Americal Oil Laboratory for lubricant testing to the following standards: :Vapor Pressure of Petroleum Products (Reid Method). ASTM D27834 Stand... View More

ASHRAE VOC Air Purification Testing

Industrial Laboratory needed for ASHRAE VOC removal efficiency of air purification equipment to the following testing methods: Testing methods: ASHRAE... View More

AHAM Electric Room Air Cleaner Testing

Electrical Laboratory needed for AHAM testing of electric room air cleaners to AHAM AC-3 Method for Measuring the Performance of Portable Household E... View More

Pyrrole Solution Flash Point and Melting Point

Life Sciences Company needs Laboratory for flash point and melting point testing of a 100-fold dilute solution of pyrrole via ISO and ASTM Test Method... View More

Pre-Mixed Alcohol Drink Product Development

PRODUCT DEVELOPMENT USA (West Coast Preferred) Food Analytical Laboratory needed for development and process validation of a pre-mixed alcohol drink.... View More

FDA Apple Juice Testing

FDA Food Analytical Test Laboratory needed for apple juice testing on levels of potassium, vitamin c, iron, and sugars by FDA approved test methods. View More

Pentachlorophenol Water and Soil Testing

California accredited Environmental Chemistry Laboratory needed that can analyze pentachlorophenol in both water and soil, with a method that can del... View More

Laboratory Culture Vessel Contract Sterilization

Research and Development R&D department of a large biotech company requires a Contract Sterilizer in Ontario, Canada to provide either Ethylene Oxide ... View More

Vitamin Finished Product and Raw Material Testing

Vitamin company needs Analytical Testing Laboratory to test our finished products and raw materials for anthocyanins and polyphenols. The matrix for t... View More

ASTM Plastic Water Vapor Transmission Testing

Construction Materials Laboratory needed for ASTM testing of a plastic sheet in accordance to ASTM E96, method B Standard Test Methods for Water Vapor... View More

ASTM Compatibility Testing

Materials Laboratory needed for laboratory analysis to ASTM D2512 Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensi... View More

Jewelry Lead and Cadmium Testing

Third-Party Laboratory needed for EPA testing of Jewelry Pendant for lead and cadmium using EPA test methods 3050, 3051 and 3052, View More

ASTM Polyolefin Surface Burning

Construction Materials Laboratory needed for ASTM rating testing of polyolefin products to ASTM E84 Standard Test Method for Surface Burning Character... View More

Bed Bug Pesticide EPA Efficacy testing

USA EPA Environmental Laboratory needed for EPA efficacy testing in the USA. Testing to be performed generally according to the EPA guideline OCSPP 81... View More

Condom Biological, Toxicity, Microbiology and Packaging Studies

Product Safety laboratory needed for ASTM and ISO testing of a liquid applying the following tests: ASTM D7661-10, Standard Test Method for Determini... View More

Protein efficiency ratio

Large Food Company needs Biochemistry Laboratory for Protein efficiency ratio rodent trial based on the Official Methods of Analysis of the Associatio... View More

FDA GMP Biopharma Container Closure Testing

Biopharmaceutical needs FDA GMP Packaging Laboratory for Container Closure Integrity test (CCIT) with validated method.The package integrity verificat... View More

Nanoparticle Coating

Nanotechnology Laboratory needed for nanoparticle coating solutions testing based on metal dioxide Nano particles used for coating of SS steel.we have... View More

RFP - ASTM Concrete Curing Compound Testing

Manufacturer needs Construction Materials Laboratory for ASTM testing on curing compounds for concrete to ASTM C309 ( A standard test method for water... View More

FDA GMP laboratory space needed for our cell therapy drug development purpose either to lease or to purchase. We will need a total 10,000 sqft space. ... View More

ISO Vehicle Cable Testing

Europe Electrical Laboratory needed for ISO testing of cable to ISO 6722-1 Road vehicles -- 60 V and 600 V single-core cables -- Part 1: Dimensions, ... View More

Perfume Formulation and Development

Europe Cosmetics Laboratory needed for formulation and development of perfume brand for men and women View More

Determination of Phospholipids in Lecithin

Analytical Chemistry Laboratory needed for phospholipid analysis of lecithin samples for a phospholipid profile using AOAC method Ja 7b-91 or Ja 7C-07... View More

Small Molecule Competitive Enzyme Inhibitor

Bioanalytical Laboratory needed for small molecule developmental study involving small molecule competitive enzyme inhibitor and purified human enzyme... View More

Rice Beer Ethanol Content Analysis

Independent Contract Analytical Laboratory needed to estimate the ethanol content in rice beer by using iodometric titration method, but upon calculat... View More

Cosmetics HRIPT

CLINICAL RESEARCH LABORATORY NEEDED FOR HRIPT TESTS OF HAIR COLORS ACCORDING TO BIS 4011:2018 METHODS OF TEST FOR
SAFETY EVALUATION OF COSMETICS View More

Vegetable Oil Testing

Agriculture Laboratory needed for vegetable oil testing for the content of 3-MCPD, 2-MCPD and glycidol according to any of the methods: AOCS Cd 29a, b... View More

ISO Road Vehicle Cable Testing

Europe Independent Laboratory needed for ISO cable testing to ISO 6722-1 Road vehicles -- 60 V and 600 V single-core cables -- Part 1: Dimensions, tes... View More

Paper Cup Leak Testing

USA Independent Laboratory needed for Paper Cup Leak Testing of 4 different size cups as per our company method. View More

Water Legionella Testing

Europe Microbiology Laboratory needed for Legionella testing in water for cell growth, PC and immunological methods View More

Aerospace ASTM Polyurethane Testing

Aerospace Company needs Polymer Laboratory for ASTM Polyurethane testing: ASTM D4274 Standard Test Methods for Testing Polyurethane Raw Materials: Det... View More

ASTM Wetting Agents Testing

Chemical Company needs USA Materials Laboratory for ASTM Draves' Wettability testing to ASTM D2281-6821 Standard Test Method for Evaluation of Wetti... View More

Artificial Turf Testing

USA Independent Laboratory needed for different types of tests on artificial turf in particular Solar Reflectance Index according to ASTM E903 Standa... View More

FDA Biopharmaceutical Release, Stability and Container Closure Integrity Testing

Biopharmaceutical Company of recombinant therapeutic proteins needs FDA GMP Laboratory for Release, Stability and Container Closure Integrity testin... View More

Pharmaceutical Excipient and Packaging Testing

Pharmaceutical Laboratory needed for Complete Excipients and Packaging Material testing as per USP/NF, Ph.Eur. and Vendor In-House Method including e... View More

Packaging Materials Testing

Large Packaging Corporation needs Materials Laboratory for testing to the following test methods standards: EN12068, ASTM E96, ASTM D1000/D257, ASTM G... View More

Garment Claims Substantiation

Consumer Products Laboratory needed for assistance on development of testing for claims substantiation of a garment that could protect against lower ... View More

SF6 (Sulphur hexafluoride) analysis in air.

Environmental Laboratory needed for SF6 (Sulphur hexafluoride) analysis in air. Please send me the information (method, sampling technique, prices, et... View More

ISO Contact Lens Compatibility Testing

Medical Device Laboratory needed for ISO compatibility testing to standard ISO 11981, Ophthalmic optics - Contact lenses and contact lens products - D... View More

India Fragrance Product Devleopment

India Laboratory needed for product development of an aagharbhati fragrance. Fragrance must be in compliance with India government standards. View More

New Cocktail Product Development

PRODUCT DEVELOPMENT New York Metropolitan Area Food Laboratory needed for assistance in the development and testing of a new cocktail formula. View More

Araucaria araucana DNA Analysis

RESEARCH AND DEVELOPMENT University Researcher needs Environmental Genetics Laboratory for DNA analysis to determine the sex of Araucaria araucana. Si... View More

Quote Request - Oxo-Degradability of Plastic Films

USA Materials Laboratory needed for Oxo-Degradability Testing on multiple plastic films by the following methods (but open to others)

? QUV Acce... View More

Quote Request - Textural Hardness of Dried Pineapple

RESEARCH AND DEVELOPMENT USA Food Laboratory needed for development of a test/ experiment to determine the textural hardness of pieces of dried pineap... View More

New Clamato Juice Food Product

NEW PRODUCT DEVELOPMENT Food Laboratory needed to reverse engineer clamato juice for and help in formulation into a new food product which contains c... View More

ASTM Medical Fixation Device Testing

Medical Device Laboratory needed for ASTM testing of orthopedic intramedullary nail to ASTM F1264 Standard Specification and Test Methods for Intrame... View More

Lab Caffeine Inhaler Product Development

PRODUCT DEVELOPMENT Research and Development Laboratory needed for caffeine inhaler in the laboratory. View More

FDA Compliant e-Cigarette New Product Development

FDA compliant laboratory needed for product development and running experiments on a new e-cigarette product. Development will include analysis of t... View More

NF Monograph Dimethicone Validation Testing

LONG-TERM TESTING USA (preferrably Texas) Pharmaceutical Laboratory needed with validated method for NF Monograph Testing on Dimethicone 1000 cst flui... View More

Vegetable Powder Nitrate Content Testing

USA Agriculture Laboratory needed for Nitrate Content Testing in various samples of powdered beets, greens and other vegetable powders tested for nitr... View More

Lubricant R&D Studies

LONG-TERM TESTING Research and Development Laboratory needed for weekly lubricant testing of 12 samples View More

Silicone Gum Blend Evaluation

Cosmetics Clinical Research Laboratory needed for development of experimental study for evaluation of silicone gum blend for it's use as film former f... View More

ISO Ash Content and Extractable Matter Testing

Large Automotive Parts Manufacturer needs Laboratory that can perform ash content as per ISO 3451 Method A and extractable matter as per ISO 6427. ... View More

Carpet Dye Fastness Testing

Housing Development Office needs Textile Laboratory for carpet dye fastness testing. View More

ASTM Waterproof Coating Testing

Materials Laboratory needed for ASTM testing of coating material in accordance to ASTM C1305 Standard Test Method for Crack Bridging Ability of Liquid... View More

Custom R&D Study V79 colony formation cytotoxicity project

CUSTOM Medical Device Laboratory (ideally in USA) needed to initiate a custom Research & Development R&D Study V79 colony formation cytotoxicity proj... View More

EPA Test Method Microbiology Disinfectant Efficacy Testing

EPA Microbiology Laboratory needed for microbiology disinfectant Efficacy testing to EPA test methods. View More

ASTM Nitrile Glove Permeation to Chemotherapy Drugs

Materials Laboratory needed for Nitrile Glove Testing to Chemotherapy Drugs and Concentration ( Tested for Resistance to Permeation by Chemotherapy Dr... View More

ASTM Vibration Dampening Testing

Physical Laboratory needed for ASTM testing to ASTM E756-05 Standard Test Method for Measuring Vibration-Damping Properties of Materials

Test condi... View More

Cookie Deformulation

PRODUCT DEVELOPMENT Large Food Company needs North American Laboratory for deformulation of cookie recipe ingredients. View More

New Pet Food Line Product Development

NEW PRODUCT DEVELOPMENT Large natural pet treats manufacturer for dogs and cats needs Food Laboratory for new product of development of new formulas o... View More

Gummy Candy Product Development

NEW PRODUCT DEVELOPMENT Food Laboratory needed to formulate a new gummy candy recipe. There is a product in the market already that we would like to r... View More

Clinical Hair Loss Restoration Product Allergy Testing

PRODUCT DEVELOPMENT Clinical Research Laboratory needed for allergy testing for a new cosmetics hair loss restoration scalp cream for Men and Women. View More

ASTM Coating Testing

Materials Laboratory needed for ASTM Testing of coating to ASTM F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating... View More

ASTM Condom Compatibility Testing

Medical Device Laboratory needed for ASTM Condom Testing to ASTM D7661-10 Standard Test Method for Determining Compatibility of Personal Lubricants wi... View More

MIL-STD Department of Defense Environmental Acidic Atmosphere Testing

Environmental Laboratory needed for acidic atmosphere testing according to MIL-STD 810G DEPARTMENT OF DEFENSE TEST METHOD STANDARD: ENVIRONMENTAL ENGI... View More

Filter Media Collection Efficiency

Laboratory needed for filter media collection efficiency by using PAO. DOP is currently used for Collection Efficiency testing to using PAO and firm ... View More

Alcoholic Product Testing

NEW PRODUCT DEVELOPMENT Independent Third-Party Laboratory needed for testing 3 new canned alcoholic beverage products for the following:
- Brix
- ... View More

API Colloid Particle Characterization Analyses

Pharmaceutical Laboratory needed for the following Active Pharmaceutical Ingredient API analyses 1. Colloid particles characterization
- Z-average ... View More

Active Pharmaceutical Ingredient API Product Development

PRODUCT DEVELOPMENT Pharmaceutical Laboratory needed Active Pharmaceutical Ingredient API examination of complex oil-in-water emulsion drug and the h... View More

Ground Enhancing Compound ASTM and IEC Testing

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching tes... View More

AOAC Inulin and FOS (Fructo-oligosaccharides) Testing

Pharmaceutical Company needs Analytical Chemistry Laboratory for AOAC raw material and finished tablet testing for the content of Inulin and FOS (Fru... View More

Synthetic Ester Oil OECD Biodegradation Testing

Laboratory needed for OECD Biodegradation testing of synthetic ester oil sample by OECD 301 F method-I Biodegradation Test ? O2 Consumption. Please ... View More

Polyurethane Injection Process Development

PROCESS DEVELOPMENT Polymer Laboratory needed for working on a project that wants to create an optimized process of polyurethane injection, that´s inc... View More

M. incognita nematodes Inhibition Efficacy

Life Science Company needs Laboratory for standard assay evaluating the efficacy of a compound for nematode (M. incognita) inhibition.
Method exampl... View More

FDA GMP Preclinical Pharmaceutical Contract Research Organization CRO needed to implement and validate an ITC method, that is in R&D mode, under FDA G... View More

ASTM Soil Susceptibility to Frost Heave and Thaw Weakening

Environmental Laboratory needed for ASTM soil testing to ASTM D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils View More

High Lipid Food Product Testing

Food Laboratory needed to perform the following tests on a high lipid food product with specified required methods of testing: Total lipids ISO 17189m... View More

Haircare Shampoos, Conditioners, Additives Testing

USA Consumer Products Laboratory needed for conducting independent accelerated package stability, physical, consumer labeling claims and microbiology ... View More

Medical Device ASTM Biodegradation

Medical Device Company needs Microbiology Laboratory for ASTM Biodegradation of Plastic Materials to ASTM ASTM D5511 Standard Test Method for Determin... View More

Anti-Parasitic Efficacy Testing

PRODUCT DEVELOPMENT Microbiology Laboratory needed for anti-parasitic efficacy testing of a powdered product added to dog and/or cat feces against ce... View More

USA Activewear Collection Textile Testing

LONG-TERM TESTING Brand Development Consultant working with USA activewear lines needs USA Textile Laboratory to assist in incorporating textile and g... View More

ASTM Thermal Interface Materials Testing

URGENT Materials Supplier to the Automotive Industry needs Materials Laboratory for ASTM Testing of Thermal Interface Materials to ASTM E595 - Test Me... View More

Dietary Supplement AOAC Caffeine Analysis

Food Analytical Chemistry Laboratory needed for AOAC Caffeine Analysis for powdered supplement to an AOAC method View More

Amazon Plastic Child Safety Device

PRODUCT DEVELOPMENT Materials Laboratory needed for testing to certify a Plastic Child safety device to sell on Amazon. The device has already passed... View More

Early Cancer Warning System Biomarker Testing

PRODUCT DEVELOPMENT CLIA Certified Clinical Laboratory needed for assisting a company in the development of an early warning system for cancer. Labora... View More

VIrology Research Study

Large Microbiology Laboratory in Egypt or Europe needed for conducting a scientific research and development virology study divided into to two diffe... View More

Pharmaceutical USP Elemental Impurities Method Development and Validation

Pharmaceutical Laboratory needed for USP Elemental Impurities (Pb y Cd) Method Development and Validation analysis in tablets. View More

IEC Power Cable Connector Certification Testing

Industrial Laboratory needed for IEC testing of compression and mechanical connectors to IEC 1238-1 Test Methods & Requirements, Compression & Mechani... View More

ASTM Non-Woven Textile Testing

Materials Laboratory needed for ASTM pore size characteristics
and water vapor transmission for non woven textile according to ASTM D6767 and ASTM E... View More

Rock Point Load Testing

Large Australia NATA Registered Laboratory needed for ASTM or ISRM rock point load tests to ASTM D5731 Standard Test Method for Determination of the P... View More

United Kingdom Agriculture Pesticide Residues Testing

Tree Nurseries needs United Kingdom Agriculture Laboratory for air and surface pesticide residues (dust/droplets/vapours) are on the inside of the equ... View More

Porcine Blood Nitrous Oxide Levels

Preclinical Laboratory needed to quantify the levels of nitrous oxide (N2O) in porcine blood samples. I will have approximately 150 - 200 samples to ... View More

USP Tribasic Calcium phosphate Testing

Pharmaceutical Laboratory needed for USP testing of Tribasic Calcium phosphate in accordance with the USP pharmacoepia method. Please specify quote. View More

New Organic Fertilizer Testing

PRODUCT DEVELOPMENT Large University needs USA Agriculture Laboratory for new organic fertilizer testing for Acetate, Butyrate, Ammonia, and Ammonium... View More

ASTM Metal Clad Fiber Testing

Advanced Materials Company needs Materials Laboratory for ASTM testing of metal clad fibers to ASTM E595 Standard Test Method for Total Mass Loss and ... View More

Dietary Supplement Pesticide Testing

Vitamin Manufacturer needs Analytical Chemistry Laboratory of 5 liquid and powder dietary supplements for pesticides to USP test methods. View More

FDA GMP Monoclonal Antibody Batch Release Testing

Large Biotechnology Company needs FDA GMP Bioanalytical Laboratory for monoclonal antibody testing for GMP batch release
- physiochemical methods (co... View More

Placer Gold Bearing Ore Testing

Natural Resources Company needs Environmental Analytical Chemistry Laboratory for placer gold bearing ore testing to determine the gold percentages pe... View More

Electronics Product Development and certification

PRODUCT DEVELOPMENT Electrical Certification Laboratory needed for product development and UL certification of a new insect killer aluminum lampholde... View More

Protein Polymer Extraction Method Development and Optimization

USa Contract Research Organization to develop and optimize extraction methods ofr recombiant unstructured protein polymer molecules with Phenol, TCA/a... View More

EPA and USP Polymer Characterization

Large Chemical Company needs Germany Polymer Laboratory for
Investigation of Polymer Materials in view of material characterization according to USP... View More

Biological Enzyme RV Deodorizer Product Development

PRODUCT DEVELOPMENT USA Biotechnology Laboratory needed for formulation of a biological/enzyme based RV holding tank deodorizer View More

European Pharmacopoeia Sterile Pharmaceutical Release Testing

Pharmaceutical Laboratory needed for sterile biopharmaceutical release testing according to European Pharmacopeia to the following parameters and met... View More

ASTM Softening of Bitumen

Industrial Laboratory needed for ASTM testing to ASTM D36-95 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus). Sometimes... View More

New Golf Putter Prototype Performance Testing

NEW PRODUCT DEVELOPMENT Sports Performance Laboratory needed for testing a new gold putter.prototype. View More

ISO Saffron Spice Quality Testing

Food Laboratory needed for ISO Saffron quality testing to ISO 3632-2:2010, Spices - Saffron (Crocus sativus L.) - Part 2: Test methods View More

FDA GMP Gene Therapy Lot Release

LONG-TERM TESTING FDA GMP Bioanalytical Laboratory needed for GMP method validation, product qualification and lot release testing of a gene therapy p... View More

Piping Insulation Burning Characteristics

Large Healthcare Company needs Laboratory for ASTM combustibility and flammability of K-Flex insulation of pipling to ASTM E84 Standard Test Method f... View More

ASTM Condom Compatibility

Medical Device Laboratory needed ASTM compatibiity testing of lubricant with condom as per ASTM D7661-10 Standard Test Method for Determining Compati... View More

ASHRAE H2S Removal Efficiency

Air Purification Company needs Industry Laboratory for ASHRAE H2S removal efficiency to ASHRAE 145.2 Laboratory Test Method for Assessing the Performa... View More

Adhesive Acute Dermal Irritation Study

Toxicology Laboratory needed for Acute Dermal Irritation Study on a liquid adhesive according to 16 CFR 1500.41 Method of testing primary irritant su... View More

ISO Prosthetics Structural Testing

Medical Device Laboratory needed for ISO prosthetics testing according to iSO 10328 Prosthetics -- Structural testing of lower-limb prostheses -- Requ... View More

Active Pharmaceutical Ingredient API Method Development and Validation

FDA GMP Pharmaceutical Laboratory needed for development and validation of a CE-UV/ MS compatible method, for impurities determination (MS only as qua... View More

Pharmaceutical Containment Equipment Testing

Pharmaceutical Third-Party Laboratory needed to conduct on-site surrogate testing for containment equipment according to ISPE SMEPAC method guideline... View More

Small Molecule, Polymer Based Drug Delivery System Method Development

LONG-TERM TESTING: PHARMACEUTICAL COMPANY NEEDS BIOANALYTICAL LABORATORY FOR METHOD DEVELOPMENT FOR SMALL MOLECULE, POLYMER BASED DRUG DELIVERY SYSTEM View More

PLM Polarized Light Microscopy Methods

USA Materials Laboratory needed Polarized Light Microscopy Methods PLM analysis of materials for asbestos content by an NATA associated laboratory in ... View More

DEVELOPMENTAL - Medical Device Orthopedic Implants

PRODUCT DEVELOPMENT Experienced Medical Device company working to develop new orthopedic implants needs Medical Product Safety Laboratory for conducti... View More

ASTM Healthcare Hand Wash Antimicrobial Efficacy Testing

Microbiology Laboratory needed for ASTM antimicrobial efficacy testing of 2 different antimicrobial handwashes :

a) Standard Test Method for Evalua... View More

Cured Rubber Electrical Properties

Materials Laboratory needed for ASTM Testing to determine the electrical properties of cured rubber to ASTM D 991, D 257 Standard Test Methods for DC ... View More

SPF 30 Sunscreen Testing

Consumer Products Laboratory need for SPF30+ sunscreen testing by single port testing method for the following :-

1) SPF ISO 24444 International St... View More

AACI Carbon Dioxide in Baking Powder

Food Company needs ISO 17025 Analytical Chemistry Laboratory for AACCI quantification of the amount of carbon dioxide and the residual of carbon diox... View More

Evaluation of Several New Child-Resistant Jar Packaging

PRODUCT DEVELOPMENT Packaging Laboratory needed for certification testing of several new child resistant products. Please provide a quote for the serv... View More

New Rapid Bacterial Enumeration and Identification System Research & Development

NEW PRODUCT DEVELOPMENT Microbiology Laboratory needed for Research and Development (R&D) assessment of a new Rapid Bacterial Enumeration and Identifi... View More

Drug Product Degradation Product Structure Elucidation

USA Pharmaceutical Analytical Chemistry Laboratory equipped with LC/NMR capability to provide structure elucidation of drug product degradation produc... View More

Dietary Supplement Active Ingredient Purity and Safety Studies

LONG-TERM TESTING Nutraceutical Laboratory needed to certify the active ingredient in our dietary supplement and ensure our product is clear of harmfu... View More

Fertilizer AOAC Determination of N, P, K

Agriculture Analytical Chemistry Laboratory needed for AOAC determination of Nitrogen, Potassium and Phosphorus in NPK fertilizer with full method of... View More

Plant Food Product Certificate of Analysis

Plant Growth Food Company needs Biochemistry Laboratoryfor complete Certificate of Analysis testing including amino acid analysis
Alanine Ala (A)
A... View More

Sterilization Validation Study

USA Microbiology Laboratory needed for sterilization validation study testing of a product containing agar/growth media which will be sterilized in la... View More

ASTM Lamination

USA Industrial Laboratory needed for ASTM testing of metal stator laminations tested to ASTM A677 Standard Specification for Nonoriented Electrical St... View More

FTMS / ASTM Chamber Fabric Testing

Large Corporation needs Materials Laboratory to test chamber fabric to the following standards: FEDERAL STANDARD: TEXTILE TEST METHODS FTMS 191, Metho... View More

New Makeup Cleansing Product Irritation Studies

PRODUCT DEVELOPMENT Cosmetics Company needs Dermatology Clinical Research Laboratory for skin and ocular irritation study for new makeup cleansing pr... View More

ISO Pipe Testing

Third-Party Laboratory needed for certification testing of DPE pipe PE100 by the following ISO Lab Test methods:

Sample 1 with different wall thick... View More

Soft Drink Development

INDIVIDUAL UK Food Laboratory needed for formulation and development of soft drink . View More

ASTM Condom Compatibility Testng

Medical Device Laboratory needed for ASTM condom compatibility testing to ASTM D7661-10 Standard Test Method for Determining Compatibility of Persona... View More

Floor Cleaning Product Effectiveness Study

Independent Laboratory needed for determining the effectiveness of two floor cleaning methods as measured by:
1) residual bacteria/microorganism pre... View More

HDL Cholesterol for Clinical Research Project

Clinical Diagnostic Laboratory needed for HDL cholesterol testing for research project by standard methods against controls. View More

SAE Compression Stress Relaxation (CSR)

Compression Stress Relaxation (CSR) SAE J2979 Test Method for Vulcanized Rubber and Thermoplastic Elastomer Determination of Compressive Stress Relax... View More

Dietary Supplement AOAC Fiber Testing

Nutraceutical company needs Analytical Chemistry Laboratory for AOAC testing of every batch of various dietary supplements for fiber to double check ... View More

EPA Registration Pre-Requisite Microbiocidal Evaluation

Environmental Microbiology Laboratory needed for EPA Registration Pre Requisite Testing including ASTM E1052 Standard Test Method to Assess the Activi... View More

ASHRAE Air Cleaning Performance

Third-Party Laboratory needed for ASHRAE testing of carbon filter 400x340x25mm to be tested with TBD standard challenge gases. ASHRAE 145.2 Laboratory... View More

AATCC and ASTM Protective Clothing Testing

Performance Laboratory needed for AATCC and ASTM water and blood penetration resistance testing of non-woven used in protective clothing to the follow... View More

Dimethyl Sulphate (DMS) in Drug Substance

FDA Analytical Chemistry Laboratory needed for analysis/ quantification testing of Dimethyl Sulphate (DMS) in Drug Substance by a validated method View More

Aerospace Turbine Blade Experiment Study

Aerospace Laboratory needed for performing an Research and Development experiment on aero-engine gas turbine blades

determine the composition, and... View More

Petroleum Distillate Testing

Oil Laboratory needed for petroleum distillate testing one and/or two type to the following two methods
IP346/96 Determination of polycyclic aromat... View More

USP Pharmaceutical API Compendial Vertification

Pharmaceutical Analytical Chemistry Laboratory needed for USP verification testing of the USP compendial method for testing the following active pharm... View More

Vaping Biobased Flavor Development

PRODUCT DEVELOPMENT Product Development Laboratory needed for development of bio based propelyn glycol based flavors that can be used for vaping. I w... View More

PRODUCT DEVELOPMENT Laboratory needed for product development of semi-permanent black tattoo ink to the following ISO Standards ISO 10933-1, ISO 1099... View More

ASTM Solar Reflectance Testing

Technology Company needs USA Laboratory for Satellite ASTM Solar Reflectance testing to ASTM C1549 Standard Test Method for Determination of Solar Ref... View More

Tint Measurement of Glass or Plastic

PRODUCT DEVELOPMENT Product Design Company needs India Optical Laboratory for measuring the tint of plastic or glass View More

FDA Product Development of Bio Bags

PRODUCT DEVELOPMENT USFDA Food Laboratory needed for toxicity, nutritional facts, biodegradability, compostability, whole material analysis , verifica... View More

ASHRAE Air Cleaning System

Environmental Laboratory needed for hydrogen sulphide removal capacity of impregnated granular media to ASHRAE 145.1 Laboratory Test Method for Assess... View More

Paint Stripping Product Spontaneous Conbustion

Materials Laboratory needed for ASTM spontaneous combustion testing of a paint stripping product applied to cloth according to ASTM D6801-07, Standard... View More

AOAC Organic Fertilizer Testing

Agriculture Analytical Chemistry Laboratory needed for powdered, organic fertilizer to three AOAC Methods:
AOAC 993.13 or 978.02 for Total Nitrogen ... View More

ISO 9888 or DIN-EN 29888 Biodegradability Testing

Third-Party laboratory needed for biodegradability testing via either ISO 9888 or DIN-EN 29888 methods. Please provide a quote. View More

Child-Resistant CR Package Testing of Mylar Pouches

PRODUCT DEVELOPMENT California company needs Packaging laboratory needed for child-resistant CR testing on new mylar pouch with a type of ziploc closu... View More

ISO Plastics Testing

Polymer Laboratory needed for ISO Testing of plastics according to 3 ISO Standards: ISO 4577 Plastics -- Polypropylene and propylene-copolymers -- Det... View More

Waterproof Medical Grade Adhesive Reformulation

PRODUCT DEVELOPMENT Laboratory needed for reformulation of a Medical Grade Adhesive to make it more waterproof while ensuring it is still safe on a... View More

OECD ICE Toxicology Testing

Toxicology Laboratory needed for OECD in-vitro testing of detergent products to OECD Test No. 438: ICE Test Method for Identifying i) Chemicals Induc... View More

Beverage Alcohol Testing

LEGAL Certified Laboratory needed for alcohol testing in beverage sold as nonalcoholic by Industry standard testing methods. Testing is done in the mi... View More

ASTM Polystyrene (HIPS) Testing

Polymer Laboratory needed for ASTM polymer testing to make measurements according to ASTMD 1693 method on high impact resistant polystyrene sample(HIP... View More

CBD Oil Testing

START-UP Laboratory needed for development of extraction and testing of CBD oil. View More

EPA OPPTS Fly Bait Testing

EPA Environmental Toxicology Laboratory needed for OPPTS toxicology testing of fly bait to OPPTS 830.1800 Enforcement analytical methods. CAS# 131929... View More

ASTM Permeation through Protective Clothing

Laboratory needed for ASTM Testing of a non-woven product to ASTM F739-07 Standard Test Method for Permeation of Liquids and Gases through Protective ... View More

Gas Permeability of Polyethylene Film

Polymer Laboratory needed for ASTM Testing for permeability for a sheet product 16 mil thick polyethylene by ASTM D-1434 method M Standard Test Method... View More

Spent Coffee Chlorogenic Acid Content

Food Laboratory needed for R&D Study spent coffee by the method rreferenced below for salt and alkali extraction. Quantitative results of chlorogenic ... View More

Coating ASTM Emissivity

Materials Laboratory needed for normal and hemispherical emissivity testing as per ASTM E408 Standard Test Methods for Total Normal Emittance of Surfa... View More

Catheter Kinetic-Chromogenic BET Testing

Medical Device Laboratory needed for Kinetic-Chromogenic Bacterial Endotoxin Test BET evaluation of catheters.. Please specify the kind of BET test m... View More

Differential scanning calorimetry DSC Melting Point

A2LA / ISO 17025 Materials Laboratory needed for ASTM thermal analysis of rubber for the Melting point by Differential scanning calorimetry DSC to AST... View More

ASTM Emesis Bags Comparison Study

Medical Device Laboratory needed for ASTM testing of 4-5 different brands of emesis bags for thickness according to ASTM D8136 Standard Test Method fo... View More

AOAC Total Dietary Fiber Analysis

LEGAL ISO 17025 Laboratory needed for AOAC total dietary fiber testing in accordance with AOAC Test Method 2009.01 Total dietary fiber in foods. Enzym... View More

Polymer Coating Films ASTM Testing

Polymer Company needs Materials Laboratory for ASTM testing of polymer coating films to a) solar Reflectance as per ASTM E 903 and b) as per ASTM E 1... View More

Medical Gown ANSI / AAMI and ASTM Testing

Materials Laboratory needed for ANSI, AAMI and ASTM Testing of medical protective gowns made out SMMS Material to ANSI/AAMIPB70 Liquid barrier perform... View More

Isolation and Identification of Probiotic

Food Microbiology needed for characterization and identification of probiotic strains for a fermented food item to verify if all 10 strains of a prob... View More

ISO Wheelchair Testing

Medical Device Laboratory needed for ISO testing of manual wheelchair testing, to the ISO 7176-8 standard Wheelchairs - Part 8: Requirements and test ... View More

ASHRAE Refrigeration Oils Testing

Large Corporation needs Third-Party Laboratory for ASHRAE Testing of refrigeration oils for sealed glass tube test as per latest ASHRAE-97 test proce... View More

Mineral Oil ASTM Testing

Veterinary Medicine Company needs Laboratory for ASTM testing of Mineral oil to the following 7 ASTM methods:
ASTMD445 - Standard Test Method for Kin... View More

Medical Gown Chemotherapy Penetration

Medical Device Laboratory needed for ASTM testing of medical gowns for chemotherapy permeation as per ASTM F739-99a (F739) Standard Test Method for Re... View More

ASTM Virucidal Efficacy

Microbiology Laboratory needed for ASTM Virucidal Efficacy Suspension Test per ASTM E1052 Method with Enterovirus 71 and Coxsackievirus
* Two test pr... View More

Antimicrobial Effectiveness

PRODUCT DEVELOPMENT Microbiology Laboratory needed for antimicrobial effectiveness study of an antimicrobial agent in preventing the growth of bacter... View More

DROP POINT ANALYSIS

URGENT North Carolina Laboratory needed for drop point analysis using a direct instrument method.

(Need more info from test requester to quote - ... View More

Pet Food Symbiotic Culture of Bacteria and Yeast

PRODUCT DEVELOPMENT Food Laboratory needed for identification of bacteria and yeast in pet food made out of dehydrated SCOBYS (Symbiotic Culture of Ba... View More

Avocado Viscosity

Food Laboratory needed for viscosity testing of avocado pulp using a standard method. View More

Pet Product CA Prop 65.

PRODUCT DEVELOPMENT Start-up Pet Product Company needs laboratory for California Proposition CA Prop 65 testing of imported pet product. . View More

ASTM and HSHRAE HVAC Testing

Industrial Laboratory needed for ASHRAE and ASTM testing of air vents and ducting accessories for HVAC. diffuser and sound attenuator ducting accesso... View More

Cigarette Nicotine and Tar Testing Quote

Analytical Chemistry Laboratory needed for tar and nicotine testing in cigarette using an ISO method. Please provide quote. View More

Plastic Product ASTM Biodegradability

Manufacturing Company needed Third-Party Laboratory for ASTM biodegradability testing of a finished plastic spoon product to ASTM D5511 test method . View More

Multiple OECD Studies

Pharmaceutical Company needs GLP Laboratory to perform several OECD Studies:

OECD 117, Test No. 117: Partition Coefficient (n-octanol/water), HPLC ... View More

Toothpaste, Nail polish removal, brightening/whiting facial cream

PRODUCT DEVELOPMENT Cosmetics Laboratory needed for development of a natural, vegan and halal certified toothpaste, nail polish remover and brightenin... View More

Sound Absorption Evaluation

URGENT / PRODUCT DEVELOPMENT Materials Laboratory needed for sound absorption testing of acoustical diffuser-absorber panel, Panel is 48x24, compos... View More

Food Acrylamide Reduction Study and Conversion of Sugars in Milk

Food Laboratory needed for the following Food Research Studies to develop applications for the reduction of acrylamide in fried food products in bakin... View More

Acetic Acid Vapor Pressure

Analytical Chemistry Laboratory needed for ASTM Acetic Acid analysis as per ASTM D2879-10: Standard Method for Vapor Pressure-Temperature Relationshi... View More

JIS Automotive Moisture, Rain and Spray Testing

Automotive Laboratory needed for JIS environmental simulation testing of automotive parts to JIS D 0203 JIS D 0203: Method of moisture, rain and spray... View More

Quote for Biocide OECD Bioaccumulation Study

Environmental Toxicology Laboratory needed for OECD 107 (Bioaccumulation potential) Study testing in a biocide sample. I would like know Please prov... View More

Animal Livestock Feed Product Development

PRODUCT DEVELOPMENT Agriculture Laboratory needed for product development, formulation and nutritional content of Animal livestock-feed from Brewers S... View More

Quote for PHA in Groundwater

Environmental Chemistry Laboratory needed for groundwater testing for polyhydroxyalkanoate (PHA) in 2 or 3 groundwater samples analyzed for polyhydrox... View More

Waterproofing Membrane Evaluation

URGENT Industrial Laboratory needed for ASTM testing of EPDM waterproofing membrane splice samples in accordance with ASTM D 7272 Standard Test Method... View More

Identification: Chondroitin Sulfate Sodium

Analytical Chemistry Laboratory needed for nutritional product testing for Identification:of Chondroitin Sulfate Sodium by company supplied electrop... View More

ASTM D-4169 Packaging Testing

Packaging Laboratory needed for the follow ASTM packaging testing

- ASTM D-4169
o 28 cases

- Tensile Testing per ASTM F88 method C
o 740 indi... View More

IMDG Marine Pollutants

Environmental Toxicology Laboratory needed for marine pollutants testing to the test methods given in Chapter 2.9.3 of the International Maritime Dang... View More

ASTM Air Duct Certification

Industrial Laboratory needed for ASTM fire resisting duct work testing to ASTM E2336-16 Standard Test Methods for Fire Resistive Grease Duct Enclosure... View More

IP and ASTM Aromatic and Saturated Hydrocarbon Testing

Industrial Laboratory needed for aromatic and saturated hydrocarbon testing to IP368 or ASTMD7419 (HPLC) or ASTMD2007 (LC). Details of the test metho... View More

Mushroom Beta-Glucan Testing and Test Method Validation

LONG-TERM TESTING ISO 17025 Laboratory needed for fest method validation and ongoing Beta-Glucan content testing from mushroom extracts. Initially ju... View More

ASTM Antimicrobial Testing

Microbiology Laboratory needed for antimicrobial testing to ASTM E2180 Standard Test Method for Determining the Activity of Incorporated Antimicrobia... View More

SAE Polymeric Material Fluid Permeation

Pharmaceutical Company needs Laboratory for SAE testing to SAE J 2659 Test Method to Measure Fluid Permeation of Polymeric Materials By Speciation View More

Creosote Grade Testing

Materials Laboratory needed for creosote grade testing to test method BS144:1997 BS 144:1997
Specification for coal tar creosote for wood preservat... View More

Cellular Adherence Study with HeLA, BAE, SH-SY5Y Cells

Bioanalytical Laboratory needed for Cellular Adherence R&D Study on 2D glass samples with 4 different types of nanotechnology surface coating on 3 di... View More

CLIA Clinical Comparison Study

CLIA Laboratory needed for bioanalysis of clinical samples in duplicate using two different technicians using a new method and new instrument. View More

EPA and ASTM Oil Analysis

Oil Laboratory needed for EPA and ASTM testing of tire derived oil analysis to the following Test Methods::
EPA Test Methods 3040 Dissolution Proced... View More

Medical Device Development

Medical Device Laboratory needed with the capabilities to measure spray pressure being dispensed from an actuator in that an aerosol/bag on valve can... View More

Effects of Autoclaving on Poloxamer 407

Polymer Laboratory needed to conduct a study on poloxamer 407, its potential degradants (formaldehyde, acetaldehyde, and formate) in water-base gel/li... View More

Grapefruit Peel Oil Testing

Analytical Chemistry Laboratory needed for quantitative analysis of samples of cold pressed grapefruit peel oil (GFP Oil) (think orange oil) for ppm a... View More

Cosmetics Compound Testing

Cosmetics Analytical Chemistry Laboratory needed for cosmetic testing (Solid/ Liquid) for the following compounds.

1 and 2 -- Atomic absorption spe... View More

ASTM Urethane Foam Testing

Materials Laboratory needed for ASTM Testing of foam per ASTM D3574 Standard Test Methods for Flexible Cellular Materials?Slab, Bonded, and Molded Ure... View More

Child Care Product Safety

Consumer Products Laboratory needed for physical and EN safety testing of dummy chains to show they are compliant to En-12586 Child Use & Care Artic... View More

SAE Strobe Lighting

Industrial Laboratory needed for the testing for strobe lighting used for emergency services to the following Test Methods SAE J595, SAE J845, CALIFOR... View More

Medical Device Compatibility of Lubricants with Rubber Latex Condoms

Medical Device Laboratory needed for ASTM testing of personal lubricants compatibility with natural rubber latex, polyurethane and polyisoprene condo... View More

Coating Flashpoint Testing

Materials Laboratory needed for flash point testing for coating product by closed-cup test method. View More

Polymer Viscometer

Large Manufacturer would like to buy an automatic polymer viscometer for the testing of PET material IV to ASTM-D4603 .Standard Test Method for Dete... View More

Biologics Sterilty

Biopharmaceutial company needs Microbiology Laboratory for sterility testing for an inactivated complex biological sample. Looking for recommendations... View More

ASTM Metal Coating Adhesion to Metal

Materials Laboratory needed for ASTM adhesion testing for metal coatings on a metal substrate to ASTM D4541, Standard Test Method for Pull-Off Strengt... View More

Plastic Part ASTM Fatigue Testing

Materials Laboratory needed for ASTM fatigue testing using a 3 point bending test for plastic par to ASTM D7774t. Details are as follow :

Fatigue... View More

EPA Semi-Volatile Organics Testing

Third-Party Laboratory needed for EPA testing of several semi-volatile organics to EPA Method 625. Testing is needed for a chlorine dioxide generator... View More

Child Dummy Clip Testing

Consumer Products Laboratory needed for child safety testing of silicone dummy clip to EN 12586 Child use and care articles. Soother holder. Safety re... View More

NIOSH Industrial Hygiene Tests

URGENT / LONG-TERM TESTING Occupational Health Laboratory needed for a large volume of NIOSH Industrial Hygiene Tests on a long-term basis. The Tests... View More

ASHRAE 145.2

Third-Party Laboratory needed for ASHRAE testing of carbon grid block/ honeycomb filter 594x594x95mm to be tested with toluene, H2S and SO2. ASHRAE 14... View More

ASHRAE Air Cleaning System

Large Corporation needs Performance Laboratory for ASHARE testing of an air cleaning device to ASHARE 145.2 Laboratory Test Method for Assessing the P... View More

Pharmaceutical Packaging Testing

Pharmaceutical Company needs Packaging Laboratory needed for ASTM burst testing on around 90 plastic heat-sealed 8 x 5 packages as part of the qualifi... View More

Earpug Noise Reduction Rating

Safety Laboratory needed for earplug Noise Reduction Rating testing compliant with ANSI STD S3.19-1974 for a new earplug design. Mean attenuation valu... View More

Skincare Product Stability Studies

PRODUCT DEVELOPMENT Start-up cosmetics ompany developing multiple skincare formulations needs Cosmetics Laboratory for accelerated stability study te... View More

Glycol Refractive Index

Materials Laboratory needed for ASTM Refractive Index Testing performed on a a hydantoin glycol used as a resin cross linker used in coatings and poly... View More

Antiperspirant Product Development

PRODUCT DEVELOPMENT Consumer Products Laboratory needed for deformulation, formulation, development and full chemical analysis of an antiperspirant pe... View More

USP Bioidentity

Pharmaceutical company needs Bioanalytical Laboratory USP Bioidentity test for Injectible to USP Method http://app.uspnf.com/uspnf/pub/index?usp=41&nf... View More

Pharmaceutical / Medical Device DSC Analysis

FDA cGMP Laboratory needed for Differential scanning calorimetry DSC analysis of 30 samples of a combination pharmaceutical/medical device according t... View More

USP 41 Cosmetics Colloidal Oatmeal

Cosmetics Analytical Chemistry Laboratory needed with validated USP method for Colloidal Oatmeal (0.9-1.1%) testing using the USP 41 Monograph. The m... View More

Microbiological Tests

Microbiology Laboratory needed that can perform some older technology analytical methods for microbiological tests specifically a cylinder plate agar ... View More

Wine Filter Product Development

PRODUCT DEVELOPMENT Independent Laboratory needed to conduct a filtration study on wine before and after filtration to determine if the filter remov... View More

Product Development Test Method Development

PRODUCT DEVELOPMENT Consumer Products Laboratory needed for Method Development for laundry stains/testing
3 stains X 3 reps = 9 stains + 3 stains (... View More

Beta-Glucan determination using the Megazyme method.

Food Analytical Chemistry Laboratory needed for the testing of several mushroom extracts for the percentage of beta-glucan using the AOAC-valdated Me... View More

ASTM Petroleum Distillate Testing

Oil Laboratory needed for ASTM substance identification testing on petroleum samples to ASTM D5292 (NMR) Aromatic Carbon Contents of Hydrocarbon Oil... View More

In Vitro Skin Sensitization and Vaginal Irritation Research Study

Clinical Research Laboratory needed for in vitro skin sensitization and vaginal irritation study on a consumer product with a validated method.. View More

ASTM Coating Testing - ASTM D4086, ASTM E1477, ASTM E1347.

Materials Laboratory needed for fiberglass pool.coating testing to 3 ASTM Standards ( ASTM D4086, ASTM E1477, ASTM E1347) to determine a dry lightness... View More

USP Surface Area Analysis

Pharmaceutical Laboratory needed for USP raw material testingfor Specific Surface Area base on USP 846 Method I or EP2.9.26, Method I View More

OPPTS Acute Toxicity and Pathogenicity

Toxicology Laboratory needed for OPPTS 885.3050 Acute oral toxicity/pathogenicity.
Principles of the test method. The test product is administered o... View More

Insulin Analysis

Clinical Laboratory needed for Insulin testng via Elisa method, and Amino Acids via MS for clinical trial. View More

Pharmaceutical Container Closure Integrity

Pharmaceutical Laboratory needed for Container Closure Integrity testing on pre-filled syringes. HVLD seems like the best method for our needs. View More

Complex Sample Matrix

Analytical Chemistry Laboratory needed to analyse the content of chlorine dioxide in chlorine dioxide solutions for disinfectant purposes.

The prod... View More

Small Batch Formulation, Development and Testing

PRODUCT DEVELOPMENT Bioanalytical Laboratory needed for multiple testing including small sample batch formulations of a powdered biological product.. ... View More

REACH Evaluation of Sodium Glucoheptonate

Laboratory needed for analysis of source of sodium glucoheptonate (Milco150) according to the REACH approved test methods. View More

Woven Reflective Materials testing to ASTM E2178.

Third-party Laboratory needed for ASTM Testing of woven high reflective breathable membrane to ASTM E2178.Standard Test Method for Air Permeance of Bu... View More

ASTM and ASME Architectural Natural Stone Testing

Cpnstruction Materials Laboratory needed for Architectural Natural Stone testing to multiple ASTM and ASME Standards including:those referenced in the... View More

ASTM Metals Thermal Conductivity Testing

LONG-TERM TESTING Industrial Laboratory needed for thermal conductivity testing by laser flash method for metals as per standard ASTM: E1461-13. Therm... View More

ASTM Building Materials Testing

Construction Laboratory needed for ASTM testing to ASTM E2178 Standard Test Method for Air Permeance of Building Materials

View More

Building Materials Standards Testing

Materials Laboratory needed for plastics testing.
1. NFP 92 503 Electrical burner test used for flexible materials thickness no more than 5mm
2. NF... View More

Fragmentation of Carbohydrate Experiment

First, we have an large, exceedingly water-insoluble, 400 kd carbohydrate that first needs to be dissolved in superheated water. (We have preliminary... View More

ISO Contact Lenses Analysis

FDA GLP Medical Device Laboratory needed for ISO testing of soft contact lenses according to ISO 18369-3 Ophthalmic optics -- Measurement methods and ... View More

REACH Metal Characterization

Metallurgical Laboratory needed for characterization of alloys of FeSiBa and FeSiCeLa for REACH purpose including the following analyses

Ce:-Qualit... View More

Pharma Hydroxyl Number Testing

Pharmaceutical Analytical Chemistry Laboratory needed that performs hydroxyl number testing using a wet method that is similar to the USP method hydro... View More

EN Medical Device Evaluation

Medical Device Laboratory needed to perform testing as per EN 13544-2 (Respiratory therapy equipment. Tubing and connectors)
- A.3 Test method Resis... View More

Protein Supplement PDCAAS

LEGAL Food Laboratory needed for determining the Daily Value Percentage by PDCAAS method of a protein powder supplement. The results would be used in ... View More

New Wine Product Development

PRODUCT DEVELOPMENT Food Laboratory needed to perform quality control testing on imported flower of palm tree to be used on bringing a new palm wine t... View More

TB Assays Comparison Study

LONG-TERM TESTING Clinical Diagnostic laboratory needed that runs TB assays/tests to conduct a comparison study of TB sample processing methods. - sam... View More

Cement Testing

Analytical Chemistry Laboratory needed for chemical testing for clinker using EN method 196-2 Method of testing cement View More

OECD Eco-Toxicity Biodegradability Study

Large Corporation needs EPA GLP Certified Laboratory for OECD Biodegradbility testing to OECD 306 method, Eco-toxicity testing View More

Biodegradability Testing

Chemical Manufacturer needs MPA Testing and OECD Biodegradability Testing of chemical as per OECD/ASTM D 2667-95(2008) Standard Test Method for Biodeg... View More

ASTM Plastic Products Biodegradability Testing

LONG-TERM TESTING Disposable plastics company needs microbiology laboratory for ASTM biodegradability testing of a wide range of plastic disposable pr... View More

Cleaning Agents Effectiveness

Third-Party Laboratory needed for ASTM coatings testing to ASTM G 122 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents. View More

Drug Product Compatibility Testing

Pharmaceutical company needs Laboratory to perform ASTM condom compatibility testing of a drug product according to ASTM D7661-10 Standard Test Metho... View More

ASTM Metal Peel Test

Aerospace Company needs Industrial Laboratory for ASTM testing: metal to metal climbing drum peel test to ASTM D1781 Standard Test Method for Climbing... View More

Soil Testing for Geological Survey

Environmental Laboratory needed for soil testing as part of a geological survey including the following tests.

1. Laboratory tests of determinatio... View More

REACH Registration Testing

Laboratory needed for identification and quantification of Benzenesulfonic acid, C10-13-alkyl derivs, sodium salts CAS 68411-30-3; EC 270-115-0 for RE... View More

USP Assay of Sennosides

Pharmaceutical Laboratory needed for assay of total sennosides per USP method for raw material and finished product tablets. View More

Cleavage Testing of Bonded Joints

Industrial Materials Laboratory needed for ASTM Cleavage testing of composite materials to ASTM D5041, Standard Test Method for Fracture Strength in C... View More

Light Reflectance Values

Engineering Firm needs Materials Laboratory for ASTM Light Reflectance Value Testing to ASTM E1347 - 06(2015)
Standard Test Method for Color and Co... View More

Deformulation of Oil-Based Cosmetics

START-UP Cosmetics Laboratory needed for deformulation, development and full chemical analysis of a skin care product line based on an Middle Easter... View More

ASTM Condom Compatiability

Medical Device Laboratory needed for ASTM Testing of personal lubricants for compatiability with natural rubber latex, polyurethane and synthetic cond... View More

VOC Content of Surfactant

Analytical Laboratory needed for VOC Analysis of two different surfactant samples by SCAQMD Method 313 or similar methodology. Cannot use EPA Method ... View More

VOC Testing

Large Corporation needed for VOC testing of cloth adhesive tape using Toyota Method TSM0508G or equivalent.


View More

Beverage Container Development

NEW PRODUCT DEVELOPMENT Packaging Laboratory needed for advisory and testing services on a new beverage product.



View More

Perfume Formulation

PRODUCT DEVELOPMENT Cosmetics Laboratory needed to conduct an experiment with perfumes and to present different formulations of a perfume. View More

EPA Air Sampling Tube Testing

EPA Environmental Laboratory needed for air sampling tube testing to EPA TO-17 test on 90 tubes for Transfluthrin.

Please provide quote that desc... View More

Air Purifier Evaluation

PRODUCT DEVELOPMENT Microbiology Laboratory needed for particulate and virus/bacteria count from an air purifier to be manufactured View More

Cosmetics Laboratory Rental Space

Cosmetic chemist planning on starting cosmetic laboratory would like to receive information on laboratory rental space in Maryland. The Cosmetics Res... View More

Automotive Lighting Systems

Industrial Laboratory needed for testing and evaluation of automotive lighting systems, lamps and mirrors. This testing includes assisting in the dev... View More

Laboratory Purchase

Development Corporation wants to purchase Laboratory with real estate in California View More

EPA Emissions Testing

EPA Environmental Laboratory needed for emission testing as per USEPA methods 29, 26a and 23a View More

Food Microbiology and Chemistry Analysis

\ISO 17025 accredited Food Laboratory needed for microbiology and analytical chemistry testing of several noodle and soy sauce products using ISO acc... View More

ANALYTICAL TESTS

Materials Laboratory needed for REACH compliant testing to the following 3 ASTM Standards

1.ASTM -D86, Standard Test Method for Distillation of Pet... View More

Car Canopy Frame Testing

Physical Laboratory needed for joint testing for a car canopy space frame that is made using new joining method. Testing to be similiar to the type of... View More

Ashrae 52.2 Testing of Electrostatic Filter

Performance Laboratory needed for ASHRAE efficiency testing of elecctrostatic filters to Ashrae 52.2 Method of Testing General Ventilation Air-Cleani... View More

Biodegradability of Biomaterial Composites

Laboratory needed for ASTM seawater biodegradability testing of biomaterial composites to determine if the materials degrade in marine water to ASTM ... View More

PRODUCT DEVELOPMENT Food Laboratory needed for formulation of adding a preservative for a fruit based liqueur to stabilize the product upon opening. View More

NABL Laboratory needed for ASTM Testing of granite to ASTM 1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Produc... View More

LONG-TERM TESTING US Automotive Laboratory needed for vendor supplier confirmation cleaning testing of parts used in pumps and turbines to ensure part... View More

LONG-TERM TESTING Aerospace Laboratory needed for ASTM Jet fuel testing (Jet-A) for its lower heating value (net heat of combustion) using experimenta... View More

PRODUCT DEVELOPMENT Cosmetics Analytical Chemistry Laboratory needed for reverse engineering testing plus possible new formulation development of skin... View More

Automotive Laboratory needed for electrical testing and possible development of a product that connect to a van sliding door and when the door is clos... View More

Oil Laboratory needed to conduct petroleum testing to a large number of Institute of Petrleum IP testing methods including: IP 599, IP 590, IP 577, ... View More

Material Laboratories needed for ISO leaching rate testing of coatings to ISO method 10890:2010 of marine anti-fouling paint. View More

Pharmaceutical Analytical Chemistry Laboratory needed for USP trace metal testing on powdered ammonium chloride to verify compliance with USP 232 (e... View More

Large Manufacturer needs Materials Laboratory for ASTM testing of viscous adhesives to ASTM D56, Standard Test Method for Flash Point by Tag Closed Cu... View More

START-UP Cosmetics company needs analytical chemistry testing of petroleum waxes to ASTM D721 Standard Test Method for Oil Content of Petroleum Waxes View More

Oil Analytical Chemistry Laboratory needed for ASTM Testing of ethanol to ASTM D7347 Standard Test Method for Determination of Olefin Content in Denat... View More

PRODUCT DEVELOPMENT Consumer Products Laboratory needed for formulation of liquid soap product for cleaning hands from grease and motor oil. View More

LONG-TERM TESTING US Company needs Polymer Laboratory with Erichsen 430P tester to test the scratch resistance of automotive molded plaques per the Vo... View More

Laboratory Consultant needed for assisting on the design and development of a telecommunication certification laboratory. View More

USA Large Beverage Company needs Materials Laboratory for adhesive coat weight testing. Similar to ASTM F 2217 or FINAT Test Method 12 View More

PRODUCT DEVELOPMENT USA food company needs packaging laboratory to study the impact of several forms of packaging on the stability of our product. We ... View More

Oil Laboratory needed for electrical conductivity of a liquid chemical hydrocarbon mixture in accordance with ASTM D4308 Standard Test Method for Elec... View More

PRODUCT DEVELOPMENT Bioanalytical Laboratory needed for formulation of an ointment used to wipe skin while tattoing. We will send samples of products... View More

Large Chemical Company needs USA based GLP Certified Laboratory for EU REACH testing to 7 OECD Guidelines including: OECD 102,Melting Point/ Melting R... View More

Materials Laboratory needed for textile testing to AATCC and ASTM testing methods including tear strength, chlorine residue, dimensional stability, et... View More

Pharmaceutical company needs laboratory for USP compendial testing of HDPE Bottle as per Current USP 661.1 & 661.2 compliance methods., View More

Food Laboratory needed for AOCS method or Mettler drop point testing for edible fats and oils, specifically using AOCS Cc 18-80 method. View More

ISO 17025 Automotive Laboratory needed for interlaboratory comparisons according to ISO 16232 Road vehicles -- Cleanliness of components of fluid circ... View More

PRODUCT DEVELOPMENT Laboratory needed for pilot plant scale polymerization trials to develop new products of a reactor system of 50-100 gallons size c... View More

Oil Laboratory needed for ASTM Testing to ASTM 2007- Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other P... View More

URGENT Materials Laboratory needed for ASTM Testing of mineral and steam turbine oil to the following ASTM Standards:
ASTM D665 Standard Test Method... View More

Microbiology Laboratory needed for BS EN disinfectant virucidal activity testing against a number of viruses: Norovirus, H1N1, Hand-Foot-Mouth-Diseas... View More

NEW PRODUCT DEVELOPMENT Agri-food business needs food laboratory to assist in the formulation and development including process development of a new c... View More

LONG-TERM TESTING Pharmaceutical Laboratory needed for raw material release and vendor qualification testing with full USP/NF/Ph.Eur. testing and met... View More

Medical Device Laboratory needed for ASTM Testing of Protective Clothing to the following standards: ASTM F1670/F1670M Standard Test Method for Resist... View More

Large Manufacturer needs A2LA Materials Laboratory for ASTM Materials Testing to following ASTM Test Methods:
ASTM D695 Compressive strength,
... View More

Consumer Products Laboratory needed for full CPSC testing of baby feeder and a teether according to CPSC requirements including:
15 USC 1278a: Lead i... View More

Automotive Laboratory needed for SAE fuel filter performance testing per SAE1985/SAEJ905, Fuel Filter Test Methods View More

Mechanical Laboratory needed for SAE testing of gasket to SAE J2659 (Test Method to Measure Fluid Permeation of Polymeric Materials By Speciation). View More

LONG-TERM TESTING: ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR QUANTITATIVE DETERMINATION OF ACETYLATED POLYSACCHARIDES IN ALOE VERA SAMPLES. O-ACETYL... View More

Microbiology Laboratory needed for AATCC and JIS antimicrobial testing of textiles to the following standards:
1)AATCC 100
2)AATCC 147
3)AATCC 30
... View More

Oil Laboratory needed for ASTM hydrocarbon testing of petroleum products to IP 436 / ASTM D6379 Determination of Aromatic Hydrocarbon Types in Aviatio... View More

FDA cGMP Pharmaceutical Microbiology Laboratory needed for microbial kill rate study including method development and validation for Ophthalmic Suspen... View More

FDA cGMP Pharmaceutical Analytical Chemistry Laboratory needed for full Injection formulation development. View More

PRODUCT DEVELOPMENT Medical Device Laboratory needed for prototyping of a biomedical device (e.g. plaster, wound healing). View More

Automotive Laboratory needed for first edition of vehicle performance test methods including:
test of vehicle centroid height
test of vehicle static... View More

Food Laboratory needed for process development to make the shelf life longer of a chocolate mousse line using a nitrogen machine View More

LONG-TERM TESTING Large Chemical Manufacturer needs Analytical Laboratory for the following testing: tapped/untapped bulk density, loss on drying, p... View More

FDA cGMP/ ISO 17025 Pharmaceutical Microbiology Laboratory needed for USP monograph, stability and compliance testing of sterile and non-sterile comp... View More

Cosmetics Analytical Chemistry Laboratory needed for flash point testing of room spray (non-aerosol) as per the EU/CLP method. View More

LONG-TERM TESTING Cosmetics Laboratory needed for testing of multiple skin care projects in development. Quotes are needed on the following analytic... View More

Large chemical company needs laboratory for OECD testing including; A1/OECD102 - Melting/Freezing Temperature
A2/OECD103 - Boiling Temperature
A6/OE... View More

LONG-TERM TESTING Medical Device Microbiology laboratory of Bioburden and sterility testing for implantable medical device. WE will send product for ... View More

Laboratory needed for polymer testing to OECD guidelines to support regulatory submission including:

111 Hydrolysis as a Function of pH
117 Partit... View More

Electrical Laboratory needed for IEC Testing to 2 IEC Standards: IEC 62132-2 Integrated circuits - Measurement of electromagnetic immunity - Part 2: M... View More

PRODUCT DEVELOPMENT Food Laboratory needed for formulation of a sugar-free coating for sour candies. The final product must be USDA organic compliant... View More

Analytical Chemistry Laboratory needed for chemical analysis of
1) Sodium Silicate
2) Fumaric acid
3) Tartaric Acid
4) Calcium hydroxide
5) Dis... View More

LEGAL Food Laboratory needed to test the fill of specific retail-sold canned tuna. The FDA has a very specific methodology mandated for how such measu... View More

Engineering company needs Materials Laboratory for testing liquid product to ASTM and ANSI Test Standards: who tests ANSI 118.10, For Load Bearing, Bo... View More

PRODUCT DEVELOPMENT Cosmetics Consumer Products Laboratory needed for new product development and formulation of baby wet wipes using minimal preserva... View More

Electrical Laboratory needed for ASTM Testing of safety protection gloves to ASTM F2675 Standard Test Method for Determining Arc Ratings of Hand Prote... View More

Plant based dietary supplement manufacturer need bioanalytical laboratory for blood testing for the measurement of NAD in human blood (Nicotinamide ad... View More

ISO/IEC 17025 Performance Laboratory for gloves testing to standard: ASTM F2961 - 15 Standard Test Method for Characterizing Gripping Performance of ... View More

START-UP Cosmetics laboratory needed for formulation and development of an aerosol hairspray styling product. View More

Product safety laboratory needed for OECD skin corrosion and irritation testing by in vitro methods OECD TG431, TG430, TG435, ...Apart from liquid pr... View More

Materials laboratory needed for ANSI and ASTM testing of liquid membranes to ANSI 118.10, For Load Bearing, Bonded, Waterproof Membranes for Thin-Set ... View More

Skincare company needs dermatology clinical research laboratory for development of a protective cream for prolonged work in gloves that helps avoid ex... View More

Chemistry consultant needed for technical support and formulation development of consumer goods products that fall into the automotive and household ... View More

University researcher needs laboratory to perform in-vitro study of antiulcer activity of plant extract according to the methodology methodology is I... View More

Chemical company needs materials laboratory for ASTM surface tension testing by ASTM D1331-14 Method A across the temperature range of 15-40C on a sam... View More

Large corporation needs food laboratory needed with a certified sensory expert to run ASTM comparison study on two developmental food packaging system... View More

Accredited laboratory needed for determining the combined thermal and mechanical stresses on messenger core of ABC cable acc to HD 626-2 subclause 2.3... View More

PRODUCT DEVELOPMENT Polymer laboratory needed for product development of hot glue product from photopolymer waste material View More

Automotive laboratory needed for ASTM testing of cooling system additives to ASTM D3147-06(2013) Standard Test Method for Testing Stop-Leak Additives... View More

Food importer needs food laboratory for product development and FDA testing of dried fruit including
nutritional and allergen analysis including a sy... View More

DEVELOPMENT Packaging laboratory needed for determining the specific packaging requirements and packaging stability testing for vinegar based syrup. C... View More

START-UP Small start-up business needs food / agriculture laboratory for comparison study of the nutritional content analysis of vegetables grown wit... View More

Laboratory needed for ASTM testing of gypsum as per ASTM C471M - Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products View More

Accredited automotive laboratory needed for ISO mechanical testing of spark plugs to ISO 11565 - Road vehicles -- Spark-plugs -- Test methods and requ... View More

Plastics laboratory needed for ISO biodegradability testing as per ISO 15985, Determination of the ultimate anaerobic biodegradation and disintegratio... View More

Medical device laboratory needed for several ASTM tests on orthopedic implant components as per ASTM F382 Standard Specification and Test Method for M... View More

NATA accredited construction materials laboratory needed to perform a Flame Index Test to ASTM E84, Standard Test Method for Surface Burning Charact... View More

Materials laboratory needed for testing depth of impressions on the surface of an embossed nonwoven sheet (approximately 25 samples).
using the meth... View More

Laboratory needed for method development to analyse active constituent in a polyherbal formulation View More

FDA registered and GMP analytical laboratory needed for USP assay analysis and method verification of Azithromycin for Oral Suspension according to th... View More

Metallurgical laboratory needed for ASTM stress testing of 4 products to ASTM G186, Standard Test Method for Determining Whether Gas-Leak-Detector Fl... View More

Materials laboratory needed for ASTM Testing of plastics to ASTM D2990 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep, R... View More

Performance laboratory needed for ASTM and ISO testing of protective fabric used in coveralls to ASTM F2130, Standard Test Method for Measuring Repel... View More

LONG-TERM TESTING Materials laboratories needed for proficiency testing for inter-laboratory comparisons for method validation (and) accreditation of ... View More

Automotive laboratory needed for a chemical compatibility verification procedure to ASHRAE 97 standard, Sealed Glass Tube Method to Test the Chemical ... View More

Food laboratory needed to measure the natural levels of antioxidants in virgin coconut oil to identify if the current method we are using is able to p... View More

FDA cGMP pharmaceutical laboratory needed for stability testing for antibiotics following the USP or BP compendial methods for assay and degradant HPL... View More

Materials laboratory needed for flammability of industrial, coated textiles to two BS Specifications including: BS 7837:1996,Specification for flamma... View More

Polymer laboratory needed for Coefficient of Friction (COF) testing on plastic film samples to ASTM D1894, Standard Test Method for Static and Kinetic... View More

MULTIPLE LABORATORIES NEEDED Company needs multiple labs participate in a collaborative study on ethanol in kombucha using a GC-FID method with headsp... View More

Large consumer products company needs laboratory for ASHRAE compliance testing to ASHRAE 145.2-2011, Laboratory Test Method for Assessing the Performa... View More

Pharmaceutical bioanalytical laboratory needed for Large Volume Parenteral (LVP) assay, related substances, degradation and impurity profile of amino... View More

Plastics laboratory needed for ASTM testing of plastic film and sheeting for water vapor using a modulated infrared sensor to ASTM F1249-13 test meth... View More

Bioharmaceutical Contract Research Organization needed for initial method development and qualification of sterility, mycoplasmas, and bioburden tests... View More

LONG-TERM TESTING Bioscience company needs bioanalytical laboratory for raw material, in-process, and final product MAT or cell-based endotoxins testi... View More

Microbiology laboratory needed for ASTM effectiveness testing of Handwash formulations as per ASTM E1174-13, Standard Test Method for Evaluation of t... View More

Food laboratory need for development of a re-hydration curve for dehydrated potato cube (3/8 inch cube). View More

Construction materials laboratory needed to conduct ASTM and AASHTO testing of asphalt binder to ASTM D2006 Method of Test for Characteristic Groups i... View More

Pharmaceutical analytical chemistry laboratory needed for Active Pharmaceutical Ingredient API testing to the following European Pharmacopeia (Ph. Eur... View More

Polymer laboratory needed for ASTM testing for determination of Carbon Black in vinyl compound to ASTM D3349 , Standard Test Method for Absorption Coe... View More

Construction laboratory needed for ASTM testing of floor covering system using radiant heat energy source to 2 ASTM standards

ASTM E 648, Standard... View More

Environmental toxicology laboratory needed for OECD testing to classify water soluble, anhydrous PAG lubricant hydraulic oil as Environmentally Accept... View More

Medical Device laboratory needed for ISO pre-compliance filter testing on medical ventilation module in accordance with ISO 23328-1:2008 standard, Bre... View More

FDA GMP compliant pharmaceutical laboratory needed for the analysis of Triethanolamine compound to the PHEU monography by a gas chromatography GC meth... View More

Construction materials laboratory needed for vinyl flooring testing to ANSI/ESD STM 7.1 Standard Test Method for the Protection of Electrostatic Disc... View More

Preclinical laboratory needed for method development of an immunofluorescence method to be used for nuclear beta catenin and applied to preclinical st... View More

Bioanalytical laboratory needed that can analyse the substance identity of two different enzymes for the purpose of the European REACH Regulation. The... View More

ISO 17025 metallurgical laboratory needed for ASTM testing of copper tubes (diameter 8mm) to ASTM B577: 2016 - Standard Test Methods for Detection o... View More

Food laboratory for milk and dairy testing including:

Butterfat Content Testing
Calcium Testing
Dairy Test Methods Testing
Dairy Test Methods Te... View More

Cosmetics laboratory needed for authoritative analysis of the free ammonia content of a cosmetic hair dye product to EU, FDA or equivalent government ... View More

FDA GMP medical device laboratory needed for testing to support FDA 510(k) based on FDA-recognized consensus standards: 3-80 AAMI ANSI ISO 81060-1:200... View More

Genetics laboratory needed for DNA extraction from 24 samples followed by Quant and analysis by 96 qPCR assays. DNA extraction per any convenient meth... View More

Coffee company needs food consumer products laboratory to compare content of brix, caffeine, tannic acid, total acids, and diterpenes (cafestol and ka... View More

LONG-TERM TESTING Large corporation needs laboratory for ASTM and ISO Testing of natural oil to the following standards: ASTM D5185 (total phosphorus... View More

Microbiology laboratory needed for MIC and MBC microbial analysis on n-hexane fractions from Anthocleista vogelii and Alstonia boonei on the following... View More

LONG-TERM TESTING Medical Device Laboratory needed for sterility test method validation and then routine sterility testing of medical device component... View More

Food analytical chemistry laboratory needed for kombucha testing for alcohol content per distillation-specific gravity method using a densitometer ins... View More

Dermatology Contract Research Organization needed to conduct an in vivo study of the influence of prolonged application of mild water temperature on s... View More

LONG-TERM TESTING Materials laboratory needed for quarterly ASTM testing of tape for minimum peel strength of 60 oz/inch width when tested in accordan... View More

START-UP Cosmetics laboratory needed for product development and formulation of bath soaps. View More

Medical device laboratory needed for ISO testing of blue light and UV ray blocking optical lenses including ISO 8980-3, Ophthalmic Optics - Uncut Fini... View More

Laboratory needed for wine product development of wine in secondary storage that is ready for aging wooden barrels for a year. Company needs to test ... View More

URGENT Physical laboratory needed for ASTM composite testing to test method of ASTM E 756: Vibration Dampening Testing

The testing sample will be ... View More

Packaging laboratory needed for ASTM testing of packaging material for cushioning curve of packaging materials by the ASTM D-1596 test method, Dynamic... View More

URGENT Pharmaceutical analytical chemistry laboratory needed for USP testing of modified lanolin for contaminants. The USP method employs GC analysis... View More

Medical Device laboratory needed for passive ligating clip medical implant testing to several ISO and IEC standards including:

F2052 Test Method fo... View More

LONG-TERM TESTING Metallurgic laboratory needed for ASTM grain size testing on Ni 200 rolled sheet that has been cold worked in multiple operations to... View More

Automotive laboratory needed for GMW sediment testing as per GMW 16037 Test Method to Quantify Cleanliness of Powertrain Components View More

Automotive laboratory needed for SAE electrochemical resistance testing of coolant hose and materials. As per SAE J1684 Method #1, referred to as a Br... View More

Laboratory needed for new product development study of new wine preservation system to show that the product decreases oxidation of wine over a contro... View More

Packaging laboratory needed for ASTM testing to ASTM C868 Standard Test Method for Chemical Resistance of Protective Linings and ASTM D6677 Standard ... View More

Consumer Products laboratory needed for CPSC testing of 3-4 models of bicycle mounted baby seats to ASTM F1625, Standard Specification and Test Method... View More

Medical Device Laboratory needed for ASTM testing of condoms to ASTM D7661-10, Standard Test Method For Determining Compatibility of Personal Lubrican... View More

Food analytical chemistry laboratory needed for product development study to evaluate the processing of a fortified coffee drink to ensure that the fo... View More

URGENT TESTING Performance laboratory needed for ASHRAE testing of air filter to ASHRAE Standard 52.1-1992,Gravimetric and Dust-Spot Procedures for Te... View More

Medical device laboratory needed for physical ASTM testing of a range of titanium surgical-grade products to the following ASTM Standards: ASTM F2052... View More

Culinary laboratory needed for food formulation and product prototype development which must meet food safety requirements for production. View More

LONG-TERM TESTING Analytical chemistry laboratory needed for American Dental Association ADA approved fluoride analysis for fluoride content in a toot... View More

Medical device laboratory needed for biodegradability testing on two different types of medical gloves to ASTM D5511 - Standard Test Method for Determ... View More

Analytical chemistry laboratory needed for evaluation of a chemical treatment by organic sulfur analysis using GC equipped with a sulfur specific dete... View More

ISO 17025 certified analytical chemistry laboratory needed for OECD testing of phenol blocked polyisocyanate to the following OECD Guidelines for Ch... View More

Medical Device laboratory needed for physiochemical testing including thermal, mechanical and dynamic analysis to support the development of a new tra... View More

Electrical laboratory needed for ionic cleanliness testing of electronic component as per IPC-TM-650, method 2.3.28, Ionic Analysis of Circuit Boards... View More

Analytical chemistry laboratory needed for ASTM testing of silicon based chemicals to ASTM E222-10: Standard Test Methods for Hydroxyl Groups Using Ac... View More

START-UP Food laboratory needed for product development of a candy product containing botanical extracts to prepare prototypes of a candy product bas... View More

Industrial hygiene microbiology laboratory needed for NIOSH tuberculosis testing from an industrial hygiene sample by NIOSH Method 0900, Mycobacterium... View More

Bioanalytical laboratory for oil stability index test per the American Oil Chemist Society official methods 12b-92 for plant oils. View More

Materials laboratory needed for ASTM thermal conductivity testing of plastic roofing product to ASTM C518 (Standard Test Method for Steady-State Therm... View More

Consumer Products Safety Laboratory needed for FDA sunglasses safety testing by drop ball test method to Standard LT-1 July 12, 1971 21 CFR 801, 410 M... View More

LONG-TERM TESTING Medical device materials laboratory needed for ASTM testing: active Af temperature of wire using DSC per ASTM F2004, Standard Test ... View More

LONG-TERM TESTING: FDA cGMP Pharmaceutical analytical chemistry laboratory needed for USP testing of two API:
1. Dicalcium phosphate dihydrate as pe... View More

Biomechanical / medical device laboratory needed for development of spinal implantable device manufactured with implantable grade PEEK and Titanium 3.... View More

Agrochemical company needs toxicology laboratory for OECD oral toxicity studies to OECD 408 - 90 day oral toxicity in vivo studies on a rodent model, ... View More

ISO 17025 analytical chemistry laboratory needed for determination of sucrose by the double polarization method of reducing sugar by GS4/3-3 reference... View More

Materials laboratory needed for development of fire retardant rubber products as per EN 4554 fire testing of materials and components for trains View More

Large corporation needs R&D laboratory for working with brewery for analysis methods for final beer product including the following forcing tests (chi... View More

UK geology laboratory needed for clay testing for suitability for end uses as clay bricks, tiles, ceramics etc. Scope of testing to include:

Stage ... View More

LONG TERM TESTING Microbiology laboratory needed for method development for mycotoxin and endotoxin testing using mass spectrometry. Our company is w... View More

Microbiology laboratory needed for method development and routine analysis of microbiological assay for vancomycin injection as per EP and USP. View More

URGENT Large paint company needs toxicology laboratory for OECD Study including method validation and development to OECD 483 assay (Mammalian Spermat... View More

Materials laboratory needed for ASTM testing for thermal conductivity of nitrile rubber Insulation foam at 0, 20, and 40 Celcius to ASTM C 518 and AST... View More

Automotive parts company needs physical materials laboratory for ASTM flammability testing to ASTM D6668 - 01(2016) Standard Test Method for Discrimin... View More

URGENT ISO17025 analytical chemistry laboratory needed for paper testing with an accredited method for analyzing citrate on paper. View More

ISO 17025 certified laboratory needed for OECD physical / chemical testing of solid materials and an octanol / water solution as per three OECD standa... View More

LONG-TERM TESTING Materials laboratory needed for ASTM physical, mechanical, and accelerated aging testing of polymer auto parts to car manufacturers ... View More

NIOSH laboratory needed for industrial hygiene testing: hazardous material surveys for asbestos, lead (Pb), tributyltin (TBT), poly-chlorinated biphen... View More

Composite materials laboratory needed for ASTM D1781 standard test method for climbing drum peel for adhesives or DIN 53295 testing of sandwiches; pee... View More

STARTUP FDA GMP food laboratory needed for organic food product development, labeling, and shelf life testing of a sauce and beverage to FDA standard... View More

Large Food company needs analytical chemistry laboratory for AOAC dietary fiber analysis testing to AOAC 985.29, AOAC 2009.01, or AOAC 2011.25 methods... View More

Physical chemistry laboratory needed for OECD testing to OECD Test No.123 Partition Coefficient (1-Octanol/Water): slow-stirring method or shake flask... View More

Consumer Products company needs analytical chemistry laboratory for AOAC Testing for composition verification of 50% pyrethrum extract in petroleum di... View More

Bioanalytical laboratory needed for capillary electrophoresis (CE) method development and testing on three samples of powder. View More

Restaurant needs food laboratory for product development / formulation of a salad dressing prior to manufacturing and marketing View More

INDIVIDUAL REQUEST. Cosmetic laboratory needed for product development / formulation of a shampoo containing a plant extract. View More

Environmental toxicology laboratory needed for OECD environmental fate study: biodegradation to OECD 301C / 301F method Ready Biodegradability Tests View More

Pharmaceutical analytical chemistry laboratory for ICH stability studies of OTC lidocaine with a validated method. View More

Engineering company needs materials laboratory for environmental simulations testing of GRP (Glass-Fibre Reinforced Plastic) ground anchor for UV st... View More

Polymer Laboratory (FDA GMP) needed for poloxamer testing for limit of free ethylene oxide, propylene oxide, and 1,4-dioxane in poloxamer 407 accordin... View More

Food Laboratory needed for liqueur product development and analytic chemistry testing / analyis for the amount of each ingredient including:
1. Crea... View More

Food analytical chemistry laboratory needed for quantitative testing of iodine and beta-glucans in malt extracts. Preferred iodine testing would use M... View More

Analytical chemistry laboratory needed for a method validation study on an ethanol concentration assay using Gas Chromatography. View More

Mechanical Laboratory needed for ASTM outgassing testing for mechanical part with ASTM E595, Standard Test Method for Total Mass Loss and Collected Vo... View More

NEW PRODUCT DEVELOPMENT Food laboratory needed for deformulation /formulation of 3 vegan beef alternative products: textured soy protein patties. View More

Distillery needs Food laboratory for alcoholic beverage product development: spirits flavor studies to standardize the flavor profile of artisanal sp... View More

Pharmaceutical laboratory needed for Container and Closure System Integrity CCI testing and method development validation via dye ingress of a contain... View More

Aviation laboratory needed for performing the following tests:

ASTM-D-1149, test for ozone cracking of vulcanized rubber

FED-STD 191, weathering... View More

Analytical chemistry laboratory needed for test method development and specific testing of sleep related quick release and extended release coated di... View More

Construction company needs materials laboratory needed for ASTM testing of insulation material to ASTM C1371 Standard Test Method for Determination o... View More

Food laboratory needed for sugar syrup testing for rheology studies for analyzing surface tension, viscosity and elasticity profiles for various sugar... View More