NEED LABORATORIES OR LAB SUPPLIERS?

ARE YOU A LABORATORY OR LAB SUPPLIER?

SUPPORT

Questions / Comments?
Call 1-855-377-6821or

Laboratory Requests

Most Recent laser optic tube inspection system (lotis) Laboratory Requests

Submit laser optic tube inspection system (lotis) Laboratory Requests

Contract Laboratory has received the following laser optic tube inspection system (lotis) Laboratory Requests which need to be fulfilled! These laser optic tube inspection system (lotis) Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their laser optic tube inspection system (lotis) Laboratory and Scientific Research. If you need a laser optic tube inspection system (lotis) Laboratory, please Submit a laser optic tube inspection system (lotis) Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Sound Products Evaluation

LONG-TERM TESTING Large sound electronics company needs sound products optically characterized and reported out on a regular basis. Typical tests such... View More

Headphone Plastics Harmful Substances Testing

Consumer Products Laboratory needed for harmful chemicals testing in the plastics packaging of a headphones product that comes in a plastic tube. We ... View More

ASTM Tube Fittings Testing

Industrial Laboratory needed for ASTM tube fittings testing including hydrostatic burst test, Make break test,Reassembly test & Hardness test.Sizes:... View More

ISO Programmable Logic Controller PLC Certification

India Certification Laboratory needed for ISO certification of Programmable Logic Controllers (PLC) to ISO 21927-9 Smoke and heat control systems --... View More

ISO Smoke and Heat control Systems

UK Industrial Laboratory needed for ISO testing to ISO 21927-9 Smoke and heat control systems -- Part 9: Specification for control equipment View More

Dry Spice Blend Deformulation

$2500 BUDGET APPROVED USA Food Analytical Chemistry Laboratory needed for deformulation (including olfactory match) of a dry spice blend such that con... View More

ASHRAE VOC Air Purification Testing

Industrial Laboratory needed for ASHRAE VOC removal efficiency of air purification equipment to the following testing methods: Testing methods: ASHRAE... View More

ASHRAE HVAC Air Register Testing

Industrial Laboratory needed for ASHRAE HVAC air registers testing for home HVAC systems for air flow, static pressure drop and throw, sound testing ... View More

IEC Lightning Protection Testing

Electrical Laboratory needed for IEC Testing of Grounding Enhancement Material to IEC 62561-7 Lightning protection system components View More

Polyurethane Foam Testing

Asia Materials Laboratory needed for polyurethane foam testing to the following standards: ASTM C518 Thermal Conductivity Of polyurethane Foam, ASTM... View More

Condom Biological, Toxicity, Microbiology and Packaging Studies

Product Safety laboratory needed for ASTM and ISO testing of a liquid applying the following tests: ASTM D7661-10, Standard Test Method for Determini... View More

Houston Laboratory Space Needed

Non US Company Expanding into USA looking to rent or purchase scientific laboratory space in Houston for purpose of petrochemicals analysis. Also loo... View More

Wallpaper Fire Testing

Wallpaper Producer needs Industrial Laboratory for fire testing according to the EUROCLASS system (Reaction to fire in accordance with EN 13501-1 - i... View More

Industrial Robotics Application Testing

Technology Laboratory needed for Industrial Robotics Application Testing in Multiple areas:
System reliability
Accuracy Test
Repeatability
Functio... View More

In-Vitro Bioavailability Study

USA or Southern Canada Preclinical Contract Research Organization needed to enhance the bioavailability of one of our natural products going into clin... View More

ANSI Glass Ballistic Testing

Materials Laboratory needed for ANSI ballistic testing for monolitic glass to ANSI Z26.1 lab tests applied to six different references of ballistic l... View More

Cell Free DNA Collection Tube Research

Genetics Laboratory needed for research on cell free DNA collection tubes View More

Small Molecule Competitive Enzyme Inhibitor

Bioanalytical Laboratory needed for small molecule developmental study involving small molecule competitive enzyme inhibitor and purified human enzyme... View More

ASTM Shipping Container Performance Testing

Packaging Laboratory needed for ASTM packaging transportation testing for medical product which comply to ASTM D4169 Standard Practice for Performanc... View More

ISO Contact Lens Compatibility Testing

Medical Device Laboratory needed for ISO compatibility testing to standard ISO 11981, Ophthalmic optics - Contact lenses and contact lens products - D... View More

ASTM Biomechanical Testing of Orthopedic Implants

Medical Device Laboratory needed for Biomechanical testing for orthopedic implants i.e. interlocking nails, bone plates, bone screws and spine fixatio... View More

Packaging DIN Microbial Barrier Testing

Microbiology Laboratory needed for DIN microbial barrier testing of packaging to (DIN58953 - 6 Sterilization; sterile supply; sterilization paper for... View More

Pharmaceutical USP Impurity Testing

Large Pharmaceutical Company needs Analytical Chemistry Laboratory for USP Impurity Testing: . Limit of xxxxx-isomer and other Impurities (by HPCE): C... View More

ISO and IEC Dental Equipment Testing

Medical Device Laboratory needed for ISO and IEC testing of dental equipment on ISO 14457:2017 Dentistry -- Handpieces and motors , IEC 60601-1 Medica... View More

Ground Enhancing Compound ASTM and IEC Testing

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching tes... View More

CLIA Gene Sequencing

LONG-TERM TESTING Health Organization needs CLIA Clinical Laboratory for gene sequencing of 100 micro tubes/week (extraction done by company) for rpoB... View More

SAE Air Dryer Testing

Large Industrial Manufacturing Company needs Laboratory for SAE Air Dryer Testing to SAE J2384 Air Dryer Test Procedure, This Standard defines the Tes... View More

SAE Brake Vacuum Tube Assemble

Automotive Laboratory needed for SAE Life testing of Brake Vacuum Tube Assembly to
ESACP1-2420-AH (Ref.: SAE J2045 Sec. 4.6 and SAE J2044 Sec. 7.5 Va... View More

DIN Polycarbonate Optical Distortion

Automotive Laboratory needed for DIN testing of polycarbonate sheet for determining The Optical Distortion And Refractive Power Of Safety Glazing Mate... View More

Early Cancer Warning System Biomarker Testing

PRODUCT DEVELOPMENT CLIA Certified Clinical Laboratory needed for assisting a company in the development of an early warning system for cancer. Labora... View More

BS Modular Wiring Testing

Electrical Laboratory needed for modular wiring products tested and certificated to BS8488 Prefabricated wiring systems intended for permanent connect... View More

VIrology Research Study

Large Microbiology Laboratory in Egypt or Europe needed for conducting a scientific research and development virology study divided into to two diffe... View More

Glass Transmission Properties

Optical Laboratory needed to determine the transmission properties of glass to determine it's use in solar panels View More

AIHA Piperdine Analysis

AIHA Certified Laboratory needed for analysis of 3 sorbent tubes of two gaseous samples plus a blank for piperidine via OSHA CSI.

View More

Initial Quote for UL Testing

Initial Quoto perform UL 1069 Standard for Hospital Signaling and Nurse Call Equipment and UL 2560 Standard for Emergency Call Systems for Assisted Li... View More

IEC Lightning Protection Certification Testing

Company involved in the lightning protection and grounding business would like Electrical Laboratory for IEC 62561-1 Lightning protection system compo... View More

DIN PVC Gutter Systems Testing

Large Construction Materials Manufacturer needs Industrial Laboratory for DIN testing of plastic polyvinyl chloride PVC gutter systems to DIN EN 607 E... View More

Consumer Products Heavy Metals Safety Testing

Consumer Products Laboratory needed for ASTM heavy metals testing to ASTM F2999-14 Standard for Basic Inspection and Testing of Adult Ornaments:
1. T... View More

Biopharmaceutical CSII Dose Accuracy and Precision

Biopharmaceutical Company needs Laboratory for dose accuracy & precision of currently available CSII system.The laboratory must have a team who has ne... View More

FDA GMP Veterinary Medicine Characterization

FDA GMP Pharmaceutical Laboratory needed for veterinary medicine pharmalogical characterization studies including the determination of: Molecular Stru... View More

ASTM Thermal Insulation Testing

URGENT SASO Materials Laboratory needed for ASTM testing of thermal insulation panel to ASTM E2430 Standard Specification for Expanded Polystyrene (E... View More

ISO Polyvinyl Chloride uPVC Piping Testing

Accredited Laboratory needed for ISO testing of uPVC pipes as per ISO 1452-2:2009 standard Plastics piping systems for water supply and for buried and... View More

Aerospace Trasmittance Measurement

Aerospace Company needs Optical Laboratory for Certification Transmittance measurement [300 to 3000 nm] of a 16 diameter optical window 1 nanometer sp... View More

FDA GMP Gene Therapy Lot Release

LONG-TERM TESTING FDA GMP Bioanalytical Laboratory needed for GMP method validation, product qualification and lot release testing of a gene therapy p... View More

ASHRAE H2S Removal Efficiency

Air Purification Company needs Industry Laboratory for ASHRAE H2S removal efficiency to ASHRAE 145.2 Laboratory Test Method for Assessing the Performa... View More

IEC Fiber Optic Testing

Fiber Optic Manufacturer needs Electrical Laboratory for IEC Compliance Testing to :IEC G653 xxxx - standard single mode.
View More

Small Molecule, Polymer Based Drug Delivery System Method Development

LONG-TERM TESTING: PHARMACEUTICAL COMPANY NEEDS BIOANALYTICAL LABORATORY FOR METHOD DEVELOPMENT FOR SMALL MOLECULE, POLYMER BASED DRUG DELIVERY SYSTEM View More

Petroleum Laboratory Equipment

Petroleum Laboratory needs Laboratory Supplier to provide a quote for the following equipment for their laboratory.

LIST OF REQUIRED EQUIPMENTS
S/... View More

New Rapid Bacterial Enumeration and Identification System Research & Development

NEW PRODUCT DEVELOPMENT Microbiology Laboratory needed for Research and Development (R&D) assessment of a new Rapid Bacterial Enumeration and Identifi... View More

Protein Comparison Study

Accredited FDA GMP / GLP and ISO 17025 Bioanalytical Laboratory needed for comparison study of a protein (mW ~5700 g/mol) from two different manufact... View More

ISO Medical Implant Biocompatibility Studies

Medical Device Manufacturer needs Product Safety Laboratory for ISO 10993 medical implants biocompatibility studies:
(sensitization, systemic toxi... View More

ASTM Pipe Fittings Testing

Industrial Laboratory needed for ASTM tubes and pipe fittings testing to ASTM F 1387 test certification for my instrumentation fittings (Tube & Pipe ... View More

ISO Medical Device Biocompatibility Studies

Medical Device Laboratory needed for ISO Biocompatibility and Toxicology Studies for an Intimate gel lubricant to ISO 10993 Biological evaluation of m... View More

Protective Paint Corrosion

Tests according ISO 12944-1:2018-06 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective... View More

ASHRAE Air Cleaning Performance

Third-Party Laboratory needed for ASHRAE testing of carbon filter 400x340x25mm to be tested with TBD standard challenge gases. ASHRAE 145.2 Laboratory... View More

AATCC and ASTM Protective Clothing Testing

Performance Laboratory needed for AATCC and ASTM water and blood penetration resistance testing of non-woven used in protective clothing to the follow... View More

ASHRAE Air Cleaning System Testing

Large Consumer Products Company needs USA Third-Party Laboratory for ASHRAE Testing to the following ASHRAE Standards:
ANSI/ASHRAE Standard 145.2-20... View More

AOAC Disinfectant Efficacy

Microbiology Laboratory needed for AOAC disinfectant efficacy testing on the following organisms.

- Influenza A (H1N1)
- HIV-1 AIDS Virus
- Res... View More

Textiles Optical Reflectivity, Transmissivity and IR Emissivity

Textiles Company needs Materials Laboratory for the following testing:

Optical reflectivity minimum @AM0
Optical transmissivity maximum @AM0
IR ... View More

ANSI Personal Fall Arrest System Testing

Large Corporation needs Performance Laboratory for ANSI Safety Testing to ANSI/ASSE Z359 American National Standard Safety Requirements for Personal ... View More

ASTM Insulation Testing

Materials Laboratory needed for ASTM testing of insulation to ASTM E2430 Standard Specification For Expanded Polystyrene (?EPS?) Thermal Insulation Bo... View More

ISO Ophthalmic optics Contact lenses Testing

ISO 18369 Ophthalmic optics -- Contact lenses
1. Gravimetric determination of water content
2. Oxygen Permeability testing
3. Mechanical Property ... View More

Tint Measurement of Glass or Plastic

PRODUCT DEVELOPMENT Product Design Company needs India Optical Laboratory for measuring the tint of plastic or glass View More

ASHRAE Air Cleaning System

Environmental Laboratory needed for hydrogen sulphide removal capacity of impregnated granular media to ASHRAE 145.1 Laboratory Test Method for Assess... View More

Constant Acceleration Testing of Weather Antenna

Large Corporation needed for ISO constant acceleration testing commercial systems weather radar antenna assembly at a functional air transport level. ... View More

IEC Lightning Protection System Components Evaluation

Electrical Laboratory needed for IEC Evaluation of Lightning protection system components (LPSC) to IEC 62561-7 Requirements for earthing enhancing co... View More

Coating ASTM Emissivity

Materials Laboratory needed for normal and hemispherical emissivity testing as per ASTM E408 Standard Test Methods for Total Normal Emittance of Surfa... View More

Automotive Design Defect

Automotive Laboratory needed for design defect testing of the Clutch and Gear system in AMT (Automatic Manual Transmission) Vehicle.
View More

ASHRAE Refrigeration Oils Testing

Large Corporation needs Third-Party Laboratory for ASHRAE Testing of refrigeration oils for sealed glass tube test as per latest ASHRAE-97 test proce... View More

Forensics Failure Investigation

Forensics Laboratory needed for on-site inspection and failure investigation of failed industrial propane-fired heater involved in a fire and also pos... View More

NSF / ANSI Water Purifier and Filtration

Laboratory needed for NSF / ANSI testing of water purifier and filter according to
NSF/ANSI 177 standard Shower filtration systems Aesthetic effects... View More

Metal Alloys Chemical, Mechanical Properties and Mechanical Behavior

LONG-TERM TESTING Metals Laboratory needed to perform chemical composition, mechanical properties, and mechanical behavior tests on a variety of metal... View More

Cosmetics Coatings Optical Contrast

Cosmetics Company needs Laboratory to measure the reflectance of multiple coatings consisting of optically variable pigment at multiple angles to quan... View More

Transportation Container Conditioning and Environmental Simulation Study

Packaging Laboratory needed for transportation study and ASTM conditioning and environmental simulation testing of shipping containers and boxes to cl... View More

Qualitative Tuberculocidal Study

BSL-2 Microbiology Laboratory needed for qualitative tuberculocidal study including bacterial kill study, colony plating and counting similar to the ... View More

ASTM Air Duct Certification

Industrial Laboratory needed for ASTM fire resisting duct work testing to ASTM E2336-16 Standard Test Methods for Fire Resistive Grease Duct Enclosure... View More

Container Closure Integrity Testing (CCIT)

FDA GMP Packaging Laboratory needed for multiple runs of container closure integrity testing (CCIT) by laseri-based headspace analysis for a product ... View More

Cordyceps Analysis

Third-Party Laboratory needed for inspection of cordyceps fo cordecepin and adenosi e etc View More

UL Photovoltaic Testing

Third-Party Laboratory needed for UL testing of Photovoltaic panels to UL2703 Standard for Mounting Systems, Mounting Devices, Clamping/Retention Devi... View More

ASTM Packaging Testing

Packaging Laboratory needed for performance testing of packaging to ASTM Testing D4169 Standard Practice for Performance Testing of Shipping Container... View More

Athletic Sports Floor Testing

Performance Laboratory needed for ASTM and DIN testing of wood athletic flooring to DIN 18032 Part II for wood athletic subfloor system and ASTM F2772... View More

Tuberculosis Studies

Microbiology Laboratory needed for performing the following two Tuberculosis Studies:
1. Antimicrobial assay for Tuberculosis
2. Cell line study f... View More

Fuel Systems Performance

Automotive Laboratory needed for SAE performance testing for fuel systems with Nylon air and fuel vapour lines to SAE J2045 Performance Requirements f... View More

FDA Medical Adhesive 510k Equivalence

FDA Medical Device Laboratory needed for validation, evaluation, and toxicology testing of UV medical adhesive (USP class VI) that is used integrat... View More

EN Earthing and Lightning Protection

Manufacturer needs laboratory for EN testing of earthing and lightning protection devices according to EN 62561:2017 Lightning protection system compo... View More

EPA Semi-Volatile Organics Testing

Third-Party Laboratory needed for EPA testing of several semi-volatile organics to EPA Method 625. Testing is needed for a chlorine dioxide generator... View More

ASHRAE 145.2

Third-Party Laboratory needed for ASHRAE testing of carbon grid block/ honeycomb filter 594x594x95mm to be tested with toluene, H2S and SO2. ASHRAE 14... View More

ASHRAE Air Cleaning System

Large Corporation needs Performance Laboratory for ASHARE testing of an air cleaning device to ASHARE 145.2 Laboratory Test Method for Assessing the P... View More

RAL Candle Quality Inspection Testing

Consumer Products Laboratory needed for RAL Quality Testing of candles to RAL-GZ041 General Quality Inspection Specifications for candles. View More

PVC Tubes Comparison Study

Laboratory needed for comparison study of the mechanical and physical properties of several different PVC extruded tubes for urometer, column strength... View More

SAE J2044 Life Cycle Testing

Automotive Laboratory needed for SAE life cycle testing of plastic fuel line connectors for the automotive industry according to SAE J2044 Quick Conne... View More

Product Development Test Method Development

PRODUCT DEVELOPMENT Consumer Products Laboratory needed for Method Development for laundry stains/testing
3 stains X 3 reps = 9 stains + 3 stains (... View More

SAE Fuel Tank Systems Testing

Electrical laboratory needed for SAE charge accumulation and dissipation testing according to SAE J1645, Fuel Systems and Components - Electrostatic C... View More

Acoustics proficiency tests for accreditation

ISO 17025 Materials Laboratory needed acoustics proficiency testing to the following ISO Standards:

(1) ISO 354 Measurement of sound absorption in ... View More

CLIA Biomarker LC-MS/MS

LONG-TERM TESTING Biotech Start-up needs CLIA certified laboratory with State-of-the-art UHPLC-MS/MS system required. for Liquid chromatography-tandem... View More

Disposable Diaper Evaluation

Consumer Products Laboratory needed for the following Disposable Baby Diapers testing:
Leakage protection
Skin dryness
Skin friendliness
Handling ... View More

CRO with human in vitro neuromuscular junction assay (NMJ) system

LONG-TERM TESTING Experienced Preclinical Contract Research Organizations CROs needed with human in vitro neuromuscular junction assay (NMJ) system us... View More

IEC 60855 and IEC 62193 Testing

Large Corporation needs Electrical Laboratory for certification of IEC 60855 Live working - Insulating foam-filled tubes and solid rods & IEC 62193 ... View More

IEC Compliance of Medical Electrical Equipment

Electrical Laboratory needed for IEC compliance testing to IEC 60601-2-47 Medical electrical equipment - Part 2-47: Particular requirements for the ba... View More

Pharmaceutical Aerosol Testing

Pharmaceutical Laboratory needed for aerosol testing including spray pattern and plume geometry analysis + droplet size distribution by laser diffract... View More

ASTM and ASME Architectural Natural Stone Testing

Cpnstruction Materials Laboratory needed for Architectural Natural Stone testing to multiple ASTM and ASME Standards including:those referenced in the... View More

ASTM Metals Thermal Conductivity Testing

LONG-TERM TESTING Industrial Laboratory needed for thermal conductivity testing by laser flash method for metals as per standard ASTM: E1461-13. Therm... View More

Hydraulic Fluid Contaminant Identification

Forensics Laboratory needed for identification of contaminant in SAE10W-30 oil hydraulic fluid that caused hydraulic system in a farming machine becam... View More

IEC Compliance of Lighting Protection System Evaluation

Industrial Laboratory required which can test earthing enhancing chemical compound as per IEC 62561-7 Lightning protection system components (LPSC) -... View More

FDA cGMP Particle Size

FDA cGMP Pharmaceutical Laboratory needed for particle size testing of Buprenorphine Base (C-III) substance using Sympatech Helios, ROdos, Vibri Instr... View More

ISO Contact Lenses Analysis

FDA GLP Medical Device Laboratory needed for ISO testing of soft contact lenses according to ISO 18369-3 Ophthalmic optics -- Measurement methods and ... View More

Clinical Research Nailpolish Study

Clinical Research Laboratory needed for clinical panel study for fingernail growth with measurement of microcirculation under a lacquered fingernail ... View More

Eyewear Optical Density

Materials Laboratory needed for optical density/wavelength testing of eyewear View More

Construction Inspection

Construction Laboratory needed for ASTM Testing to ASTM E 329 - Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Sp... View More

Polymer Composite Sheet Testing

LONG-TERM TESTING Materials Laboratory needed for acoustics properties and sound absorption evaluation of polymer composite sheets of size (250 mm X ... View More

EPA Air Sampling Tube Testing

EPA Environmental Laboratory needed for air sampling tube testing to EPA TO-17 test on 90 tubes for Transfluthrin.

Please provide quote that desc... View More

Automotive Lighting Systems

Industrial Laboratory needed for testing and evaluation of automotive lighting systems, lamps and mirrors. This testing includes assisting in the dev... View More

Europe Compliance Testing of Hygiene and Home Cleaners

USA Laboratory needed for pressure-sensitive labeling and shrink wrap optical and infrared testing for European NIR / AAR compliance on a large range... View More

Optical Testing

Large Innovative Electronics Company needs Materials Laboratory for wavefront optical testing. View More

Quality Control Testing of Candles

LONG-TERM TESTING
Candle Manufacturer needs Laboratory for quality control raw materials testing to RAl-GZ-041 edition 2016, General Quality and Ins... View More

Index of Refraction of Polymeric System

LONG-TERM TESTING R&D Polymer Laboratory needed for determining the index of refraction of polymeric system (a flat solid sheet) on 10-20 samples. View More

Mechanical Laboratory needed for engine testing to determine how the connected exhaust system affects the brake power of the engine and to calculate t... View More

Lighting Manufacturer needs Laboratory for SAE candela measurements testing to SAE J845 Optical Warning Devices for Authorized Emergency, Maintenance... View More

LONG-TERM TESTING Construction Materials Laboratory needed for ASTM Testing of insulating sheets and tubes to ASTM C534 Standard Specification for Pre... View More

FDA GLP Medical Device Product Safety Laboratory needed for ISO 10993-1 biocompatibility studies for implantable bone graft substitutes (granules), ... View More

Electrical Certification Laboratory needed for electrical certification testing of various telecommunication devices
including BT/Wi-Fi Transmitter... View More

LONG-TERM Contract Sterilizer needed for sterilization of a range of measuring fragile medical equipment post contact with human tissue. Components mu... View More

Large Technology Company needs Automotive Laboratory for Cleanliness Testing To VDA and ISO Standards: VDA 19 Inspection of Technical Cleanliness - ... View More

PRODUCT DEVELOPMENT Laboratory needed for pilot plant scale polymerization trials to develop new products of a reactor system of 50-100 gallons size c... View More

Medical Device Laboratory needed for ASTM Testing of Protective Clothing to the following standards: ASTM F1670/F1670M Standard Test Method for Resist... View More

Automotive Laboratory needed for Federal Motor Vehicle Safety Standards FMVSS pull testing of modified vehicle seats to FMVSS 207 49CFR 571.207 Seatin... View More

Microbiology Laboratory needed for AOAC disinfectant efficacy testing for general disinfection on hard surfaces for use in Hospitals and medical Insti... View More

Electrical Laboratory needed that is accredited to test in accordance to IEC 62287-1 Maritime navigation and radiocommunication equipment and systems ... View More

Automotive Laboratory needed for first edition of vehicle performance test methods including:
test of vehicle centroid height
test of vehicle static... View More

Electrical Laboratory needed for fir safety of electrical radiant heating systems and its ability to start a fire when installed in domestic or Comme... View More

Large Manufacturer need Automotive Laboratory for FMVSS Testing of Step Van to FMVSS 124.Accelerator Control Systems View More

Laboratory needed for cargo pre-shipment inspection on Dry Turmeric Fingers including the Curcumin Content. View More

Steel manufacturer needs metallurgical Laboratory for color-coated galvanised steel testing including mechanical, thermal (expansion coefficient, vapo... View More

Materials laboratory needed for optical testing to determine the luminescence and the evenness of the light across a part that is 3±0.5 cd/m^2 and ev... View More

Large chemical company needed analytical chemistry laboratory for identification of sulfur species in liquid samples. Analysis of our sample by XRF s... View More

Skincare company needs dermatology clinical research laboratory for development of a protective cream for prolonged work in gloves that helps avoid ex... View More

Polymer laboratory needed for laser transparency testing on plastic nylon parts.The values of laser transparency apply on every 12 points located on ... View More

Electrical laboratory needed for SAE charge accumulation and dissipation testing for rubber hose with flowing fuel substitute fluid according to SAE16... View More

Large corporation needs food laboratory needed with a certified sensory expert to run ASTM comparison study on two developmental food packaging system... View More

LONG-TERM TESTING Materials laboratory need for optical testing of polycarbonate resin lenses for transmittance, visible light wavelength blocking, an... View More

Automotive laboratory needed for ASTM testing of cooling system additives to ASTM D3147-06(2013) Standard Test Method for Testing Stop-Leak Additives... View More

Food importer needs food laboratory for product development and FDA testing of dried fruit including
nutritional and allergen analysis including a sy... View More

URGENT Automotive laboratory needed for burst and ozone testing per SAE j2064 and ASTM D380 on 4 different automotive a/c hose and tube assembly, 2 sp... View More

Materials laboratory needed for testing depth of impressions on the surface of an embossed nonwoven sheet (approximately 25 samples).
using the meth... View More

Company interested in acquiring an analytical laboratory in Saudi Arabia for the testing for quality assurance, testing, inspection, and certification... View More

Automotive laboratory needed for a chemical compatibility verification procedure to ASHRAE 97 standard, Sealed Glass Tube Method to Test the Chemical ... View More

Automotive mechanical laboratory needed for SAE burst and ozone testing of heavy duty machinery a/c hose and tube assemblies per SAE 2064,Refrigerant ... View More

Laboratory needed for ANSI testing a pilot and thermocouple assembly to ensure that it meets ANSI Z21.77 for Piezo-Electric Spark Ignitors and ANSI Z2... View More

Large consumer products company needs laboratory for ASHRAE compliance testing to ASHRAE 145.2-2011, Laboratory Test Method for Assessing the Performa... View More

LONG-TERM TESTING Electrical laboratory needed for compliance testing of electrical grounding rods and accessories as per IEC 62561 standards, Lightni... View More

Coffee machine manufacturer and coffee supplier needs food laboratory needed for inspection of green coffee beans for identification of arabica or ro... View More

Accredited laboratory recognized by certifying bodies needed for ANSI testing of metal halide quartz lamp to determine if it fullfills the demands fo... View More

University Researcher needs preclinical laboratory for in vivo pharmacokinetic /pharmacodynamic PK/PD studies of acrylic based, antihypertensive trans... View More

Construction laboratory needed for ASTM testing of floor covering system using radiant heat energy source to 2 ASTM standards

ASTM E 648, Standard... View More

Medical Device laboratory needed for ISO pre-compliance filter testing on medical ventilation module in accordance with ISO 23328-1:2008 standard, Bre... View More

LONG-TERM TESTING Large corporation needs electrical laboratory for multiple electrical tests on refrigerator system (domestic and commercial). View More

ISO 17025 metallurgical laboratory needed for ASTM testing of copper tubes (diameter 8mm) to ASTM B577: 2016 - Standard Test Methods for Detection o... View More

Laboratory needed for optical testing on LCD displays. View More

Medical device laboratory needed for ISO testing of blue light and UV ray blocking optical lenses including ISO 8980-3, Ophthalmic Optics - Uncut Fini... View More

Oil laboratory needed for refrigerant systems compressor oil analysis of four mechanical HVAC compressors. View More

Electrical laboratory needed for BS testing of railway cable insulator to BS EN 62621:2016+A1, Railway applications. Fixed installations. Electric tra... View More

Electrical laboratory needed for IEC testing of ladder cable tray under IEC to EN 61537:2001 Cable tray systems and cable ladder systems for cable man... View More

Laboratory needed for new product development study of new wine preservation system to show that the product decreases oxidation of wine over a contro... View More

NABL Electrical laboratory needed for IEC electrical continuity testing as per IEC 61537 cable management - cable tray systems and cable ladder system... View More

Analytical chemistry laboratory needed for testing of activated carbon powder for use in a water filtration system to NSF/ANSI 61 - Drinking Water Sys... View More

NABL electrical laboratory needed for IEC testing of cable tray as per IEC 61537 Standard: Cable Management - Cable Tray Systems and Cable Ladder Sys... View More

Laboratory needed for SAE stability testing of fluorescent dyes as per SAE J2297, Ultraviolet Leak Detection: Stability and Compatibility Criteria of ... View More

FDA cGMP Medical device laboratory needed for product safety and toxicology study testing of water based personal lubricant including

1) Condom bio... View More

Automotive laboratory needed for SAE functional and validation testing of automotive quick couplings as per SAE J2044 , Quick Connect Coupling Specifi... View More

Materials laboratory needed for determination of optical transmission characteristics of red plastic lens resin used in laser receiver products. Th... View More

Electrical laboratory needed for cable testing as per IEC 61537, Cable management - Cable tray systems and cable ladder systems
View More

Industrial hygiene microbiology laboratory needed for NIOSH tuberculosis testing from an industrial hygiene sample by NIOSH Method 0900, Mycobacterium... View More

LONG-TERM TESTING Pharmaceutical company needs physical chemistry laboratory for particle size analysis of bulk drug active pharmaceutical ingredient ... View More

Experienced analytical chemistry laboratory needed for ISO testing of fragrance essential oil for optical rotation (OR) and acid value to ISO 1242:199... View More

Geological laboratory needed for isotope testing of rock samples using laser fluorination utilizing triple oxygen isotope analysis in order to establi... View More

Analytical chemistry laboratory need for purity testing of an essential oil by ISO 592:1998 optical rotation test, and ISO 1242:1999 determination of ... View More

Physical laboratory needed for mechanical durability testing of industrial glass tubes. View More

Materials / Polymer laboratory need for analytical chemistry testing: optical polarimetry for chirality of two separate bisphenol A (BPA) epoxy resin... View More

Health company needs materials laboratory needed for non-destructive NDT optical testing including surface roughness analysis of non-flat surface. View More

Automotive laboratory needed for a brake fluid stroking test according to FMVSS n116 para. 6.13 on 2 complete disc brake systems and 2 complete drum b... View More

Medical Device (Optics) laboratory needed for analytical chemistry testing of potential contaminants in a product coating liquid via NMR and FTIR. GC... View More

Electrical communications laboratory needed for IEC 61537 Cl. 10.2-10.8 testing of cable tray and ladder systems with respect to the following:

1. ... View More

Large Chemical Company needs materials laboratory for ASTM combustion testing for measuring the optical density of smoke, and surface flammability of ... View More

Pharmaceutical laboratory needed for Container and Closure System Integrity CCI testing and method development validation via dye ingress of a contain... View More

Automotive laboratory needed for SAE J905 Sections 3 through 7 (Resistance to flow, contamination collection, release of contamination from filter int... View More

Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to ... View More

Materials laboratory needed for ASTM testing for fire extinguisher compliance and safety testing to meet AHRI standards using the following guidelines... View More

Materials laboratory needed for corrosion testing of a chemical on boiler systems. View More

LONG TERM. TESTING Petroleum laboratory needed for ISO and ASME Testing: of composite reinforcement to ASME PCC2/ISO 24817Petroleum, petrochemical and... View More

Packaging laboratory needed for complete packaging testing of 7 SKU's of products including: material testing, and benchmark packaging
Bottles: Drop... View More

Electrical laboratory needed for ASTM & IEC Testing of ground enhancing compound to IEC 62561 Lightning protection system components
1. Leaching tes... View More

Optical filter laboratory needed for transmissivity from UV testing through the visible spectrum of three filter glasses with the assumption two are b... View More

Medical devices laboratory needed for ISO Testing of medical breathing tubing to ISO 5367 Annex A, Annex C, Annex D, Annex E, Annex F, testing of tu... View More

Medical Device laboratory needed for ASTM and ISO product safety testing for evaluation of medical devices including toxicology, packaging and microbi... View More

Materials Laboratory needed for optical testing of light diffuser sheet for Optical characteristics. View More

Pharmaceutical analytical chemistry laboratory needed for particle size analysis using a Malvern Zetasizer ZS90 with the red laser and a stray-light f... View More

Electrical laboratory needed for load testing in accordance with IEC 62561-5, Clause 5.2.2 Lightning protection system components (LPSC) - Part 5: Req... View More

Company planning on establishing independent and third party Tobacco & Cigarettes Testing Lab based on ISO 17025 Standard, would like to purchase : 1)... View More

Oil Laboratory needed for product development testing of diesel and gasoline additive combination with methanol. Previous studies showed the Binding o... View More

Telecommunications laboratory needed for NABL certification testing of optic fiber cables. View More

ISO or A2LA Automotive Laboratory needed for SAE testing of brake lines. Testing per SAE J1047, Tubing - Motor Vehicle Brake System Hydraulic View More

LONG-TERM TESTING Large manufacturing company needs food /commodities laboratory for bulk taner cargo inspections: Confirmatory Certificate of Analys... View More

Large company needs Optical Properties of 1 cm lenses tested for the following: Transmittance, Comatic Aberration, Veiling Glare Index, Lens Flare, ... View More

Marine Biology laboratory need for aquaculture testing as company sets aquaculture System (RAS) shrimp farm View More

Large company needs laboratory for Optical Characterization, Functional and comparison testing for a plastic Lens to characterize the Lens used in a... View More

Pharmaceutical Laboratory needed for particle analysis: PARTICLE SIZE determination by using the ?Alpine air jet sieve system?, View More

Automotive parts manufacturing company needs testing of a lubricant certification per ASHRAE -97. The lubricant is a solvent based deforming product t... View More

Microbiology Laboratory needed for disinfection efficacy research study for new surface disinfecting system early next year.The initial testing will b... View More

ISO 17025 laboratory needed for electrical safety testing to Polyvinyl Chloride PVC skirting/Dado Trunking according to BS EN 50085Cable trunking syst... View More

Long Term Testing: Lighting performance testing needed for LED T8 tubes to assure conformance with standards published by the manufacturer for their p... View More

Pharmaceutical Contract Research Organization needed for oncology preclinical study of a therapeutic nanoparticle drug delivery systemin Breast can... View More

Large aerospace company needs laboratory for SAE fuel system testing to 3 SAE Standards: SAE J2260, Non-metallic Fuel System Tubing with One or More L... View More

Food analytical chemistry laboratory needed for Chemical validation testing of food processing chemicals. This involves us pulling diluted chemical s... View More

Clinical Laboratory needed for amino acid analysis: Plasma Amino acids by IEC and Organic acids by Gas Chromatography and Mass Spectrophotometry.Amino... View More

Laboratory needed for SAE Testing to SAE J1684, Test Method for Evaluating the Electrochemical Resistance of Coolant System Hoses and Materials View More

Mining operation extracting silver and gold needs cyanide bottle roll and size distribution test on some mine tailings to determine process and system... View More

Laboratory needed for multiple tests on Oil Cooling System including crash, vibration, contamination, fire, oil leakage, thermal cycling, etc:

1... View More

Materials laboratory needed for IEC and ASTM Testing of insulators (several tests) : ASTM C177: Standard test method for steady-state heat flux measur... View More

Materials laboratory needed for NATO coatings testing of chemical agent resistant coating (CARC) to North Atlantic Treaty Organization NATO AEP 64 sta... View More

Optical absorption of crystal substrate using laser calorimetry. View More

Laboratory needed for gas flooding-reporting on slim tube, gas injuction and flow assurance
View More

Europe electrical laboratory needed for IEC tests on fibreoptic cables according to IEC IEC 60793-xx and 60794-xx standards: Testing fibreoptic cable... View More

LONG-TERM TESTING Packaging Laboratory needed for packaging testing of In flexible packing materials like double laminated , triple laminated & other ... View More

Materials laboratory needed for surgical gowns testing
- NFPA Standards - Standards for the use of Inhalation Anesthetics.

- ASTM 1670, Standard ... View More

LONG TERM TESTING Materials Laboratory needed for Polyamide Tube testing to prove compliance with DIN73378, DIN74324-1 and SAEJ844 Many different test... View More

LONG-TERM TESTING Geophysical Laboratory needed for Particle Analysis: Particle Size Distribution by Laser Diffraction of Quartz, Fly Ash, GGBS etc. W... View More

Electrical Laboratory needed for IEC Testing to IEC60855-1, Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-... View More

Bioanalytical laboratory needed for study for determining cisplatin levels in human tumor xenografts (after systemic cisplatin treatments to mice bear... View More

Laboratory needed for particle size analysis (laser diffraction?) for a number of samples of cement (~30) . 30 samples. View More

Electrical certification laboratory needed for FCC conformance testing on transportation systems. Please provide quote View More

Electrical Laboratory needed for IEC Testing to International Electrotechnical Commission
IEC 60855-1, Insulating foam-filled tubes and solid rods -... View More

Microbiology laboratory needed for anti-algae testing for Foul Release system View More

ISO certified Medical Device Laboratory needed for Bio feedback system testing to 60601 CB Scheme. Possible FCC (and equivalent for EU, Japan, Brazil) View More

Materials Laboratory needed to measure the optical transmittance of a ceramic thin film in the range 200 - 800nm.
View More

URGENT Engineering company needs laboratory for solar system testing.
View More

Fuel system company needs laboratory experienced in aggressive fuel fuel system compatibiligy for chemical analysis of sour/contaminated gasoline to d... View More

Clinical Sports Performance laboratory needed for clinical biomechanical testing in humans to validate performance of university's sports biomechanics... View More

GMP / GLP Toxicology Laboratory needed for Evaluation of the systemic in vivo toxicology of water soluble nanoparticles and determination of LD50 by I... View More

Asia Materials laboratory needed for ASTM Testing to ASTM F1671, Standard Test Method for Resistance of Materials Used in Protective Clothing to Penet... View More

Large Pharma needs FDA GLP-certified laboratory for nonclinical animal toxicity studies need for intranasal toxicity study in monkey.Determination of ... View More

Lighting company needs optical laboratory needed for spectral transmittance measurement services. on quartz glass tubing 26mm I.D x 32mm O.D. (3mm wa... View More

Laboratory needed for quantitative analysis of DEHP and DEHT. Must extract a resin from peristaltic pump tubes and then within that resin find the DEH... View More

Analytical Chemistry Laboratory needed for Formulation of a novel insect repellent based on combination of esential oils for use in spray systems View More

Medical Device Manufacturer needs medical device laboratory for sterilization validation of device sterilization process.
1.¬ ¬Sterilization m... View More

FDA GMP Bioanalytical Laboratory needed for blood testing for platelet yield , %platelet recovery and platelet recovery factor in PRP tubes for obtai... View More

LEGAL Materials laboratory needed for measuring surface of a flexible thin film material to characterize a few topographical features such as surface ... View More

Analytical chemistry laboratory needed for XAD-7 OVS sorbent tubes testing: Propylene Glycol analysis of 20 samples. Please provide
the cost for t... View More

Electrical Laboratory needed for Compact Fluorescent Lights (CFL) and Tube Fluorescent Lights (TFL) Testing for Hg - Mercury weight measurements View More

Materials Laboratory needed to Measure 3D surface profile of a very smooth service with Wyko Optical Interferometer View More

Materials laboratory needed for Optical Testing of epoxy samples for fluorescence, transmission, and reflectance View More

Contract Medical Device Laboratory needed for FDA Testing of endotracheal tubes (ETT) to FDA recognized standards.

? ISO 5356-1 (2015), Anaestheti... View More

Clinical Laboratory needed for FDA approved blood testing for Tuberculosis TB View More

Contract Laboratory needed for film testing of UV400 Optical Film for UV protection and light transmission reflective, absorbtion and U Value View More

Europe company needs microbiology laboratory for EN norm Efficacy testing of algaecide for application to water systems, such as swimming pools & spa... View More

Australia bioanalytical laboratory needed to make degalactosylated/desialylated bovine colostrum from normal bovine colostrum in various amounts.

P... View More

Materials laboratory needed for Precision surface metrology testing of the inner surface of ring-like metal parts. Contact (precision spindle) measur... View More

Laboratory needed that is capable of testing a 6 ft fluorescent tube from UV through the visible spectrum. The spectral analysis is preferred to be be... View More

Contract Laboratory needed for microscopy on polymers for comparisons with image & measurements obtained with a Laserlec Optilec H1200 confocal micro... View More

Electrical certification laboratory needed for LED Testing for Certificate for CGT FLAT (LED Light Flat tube)
Length: 1 meter
1) Lumen Test (4PI)
... View More

FDA GMP Medical Device Laboratory needed for biocompatibility testing of polypropylene mesh for medical use for a 510(k) application in accordance wi... View More

Polymer Laboratory needed for optical density rating on a couple of pieces of polycarbonate. One would be a clear piece and the other a smoked grey pi... View More

Medical Technology Laboratory needed for biomechanical testing of dental implants to ISO14801 - compression to failure and fatigue testing of dental i... View More

Acoustics Laboratory needed for acoustic testing on our designer wall paneling and ceiling system. View More

FDA Electrical medical device laboratory needed for Skin massager testing:
2. FDA Product Code : PBX
3. Performance test standard
? IEC 60601-1: M... View More

Sports company needs optical laboratory for specific spectrum data of lens in 6 different sports environments. For example, the sports glasses used fo... View More

Russia company needs optical laboratory to test optical elements made of Co-spinel (Co2+MgAl2O4 ?cobalt of spinel) View More

ILAC certified laboratory needed to perform testing of instruments and systems against IEC 60601-1-2, Medical electrical equipment - Part 1-2: Gen... View More

URGENT Materials laboratory needed for physical and microbiology ASTM testing of tape bituminous wrapping tape used in petroleum pipelines
Property ... View More

Large oil company needs electrical laboratory for electrical compliance inspections. At our facility we use hot sticks, release hooks, and other equip... View More

Materials laboratory needed for #ASTM Testing to ASTM D3539 and ASTM D1331 for 31 liquid coating systems. View More

Product Safety laboratory needed for testing packages for new substances under Globally Harmonized System of Classification and Labeling of Chemicals ... View More

Acoustics Laboratory needed for acoustic testing on our designer wall paneling and ceiling system. View More

Performance Laboratory needed for Ballistic Visor optic evaluation
Fogging assessment test
Optic distortion test
Luminous transmittance test
Haze... View More

Russia Materials Laboratory needed for ASTM Testing for determination of iodine adsorption - ASTM D1510-13
The lab must be accredited by a single nat... View More

Medical Device Product Safety Laboratory needed for Stability Testing and Biodegradability Testing of Nature latex foley balloon catheter ,Scalp vein ... View More

Pharmaceutical analytical chemistry laboratory needed for analysis for the Buprenorphine active pharmaceutical ingredient: 1) Test - Solution Method t... View More

Optical Laboratory needed for ballistic visor testing
Optic Distortion Test
Luminous Transmittance Test
Haze Resistance Test
Refractive Test
Pris... View More

USA Materials Laboratory needed for Density testing according to ASTM D1505, Standard Test Method for Density of Plastics by the Density-Gradient Tech... View More

Microbiology Laboratory needed for UVC Lighting system testing on Clostridium difficile and MRSA Methicillin resistant Staphylococcus aureus View More

Optical Laboratory needed for eyeglass testing for the amount of green and blue light that can pass through the lenses used in our eyeglasses. View More

Optical Laboratory needed for Reflectance Testing. We want to find reflection coefficient measurement on silver coated mirrors that we produced. View More

China cosmetic product safety laboratory needed for USP Testing of cosmetics for the following
Tests- Product
- USP 51
- Stabi... View More

USA analytical chemistry laboratory needed for organic content testing (TOC). The standard methods used for this testing are 5210B for CBOD and BOD, ... View More

India Certification Laboratory neded for UL Certification Testing of Synchronisation time module as per the standard aUL 61010-2-201?.
Components are... View More

Metrology Laboratory for genetic's laboratory site equipment inspection and certification to meet CAP/CLIA/AABB and ASCLD-LAB standards View More

Physical Laboratory needed for NFPA fire rating testing of metallic cable trays ( hot dip galvanized) in conformity to NFPA 130. Fixed Guideway Tran... View More

Physical Laboratory needed for thermal and optical properties testing (absorptance/emittance) for a small electronics board (50 mm x 50 mm). The purp... View More

IMPORTER OF FEED INGREDIENTS NEEDS AGRICULTURE LABORATORY FOR FISHMEAL TESTING AND CARGO INSPECTION FOR MELAMINE, SALMONELLA AND UREA TESTING. View More

Medical Device Laboratory needed for EUropean Pharmacopeia Testing of Surgical threads to European Pharmacopeia [8.0] Monograph 01:2008:0324, IDENTIF... View More

Asia company needs laboratory for microscopic testing of tube and shell type heat exchanger used in Liquified petroleum gas View More

USA UL certification laboratory needed for conveyor system testing (brand hytrol), with 3 electrical control panels the individual components in the ... View More

INdia materials laboratory needed for Carbon Residual Test As Per EN 723 For Brass And Copper Tubes View More

Genetics Laboratory needed for full genome sequencing for Mycobacterium tuberculosis strains we isolate from our TB patients. Could you please let me ... View More

Europe accredited laboratory needed with accreditation for the scope of the test method in accordance with

- EN 13500 - Thermal insulation produc... View More

USA CRO needed that can determine the pka of my samples. What is standard & rush turnaround time, pricing, and quality system (ISO 9001, GLP/GMP pref... View More

Aeronautical company needs laboratory for suface roughness testing on tube. Tube sample: 3.5 OD and 2.25ID
Surface Roughness Test View More

Southeast Asia Laboratory needed for RTCA/DO-160G Testing of a WiFi entertainment distribution system for aircraft installation.Capability to test DO-... View More

Southeast USA electrical laboratory needed for electrical control panel testing of installed a conveyor system (brand hytrol), with 3 electrical cont... View More

Northeast North America (Canada or USA) electrical certification laboratory needed for ANSI Certification of an electrical revenue metering system to ... View More

URGENT: USA environmental laboratory needed for two European Union studies on compound tetrakis (hexylmethyl)phosphonium sulfate (THPS), which they r... View More

EPA Environmental Toxicology Laboratory needed for toxicity testing done for a pesticide adjuvant as per EPA dermal, and optic toxicity testing protoc... View More

Medical Device Product Safety Laboratory needed for Stability Testing and Biodegradability Testing of Nature latex foley balloon catheter ,Scalp vein... View More

LONG-TERM TESTING Cosmetics Manufacturing Company needs microbiology laboratory to assist with and perform testing to start our environmental monitori... View More

Optical laboratory needed for filter and testing for optical light transmission density. Company has cracked 16Ømm x 1mm thick filter that is part of ... View More

ON-SITE Oman Contract Laboratory needed for valves and check valves inspection and now we retesting valves as per UL Standard 262 and 312 total qu... View More

Electrical Laboratory needed to Perform ESD test on ATV fuel system to SAE Standard at SAE J1645 View More

Testing laboratory able to perform: Resistance to frictions of pipes and protective sleeves of automotive fuel systems View More

ISO 17025 Materials Laboratory needed for paint testing to VW Standard VW TL211 Table 2 section 1.3 Evaluation of effect paints in terms of differenc... View More

Europe preclinical contract research organization laboratory needed for biomarker study for the diagnosis and treatment of Myalgic Encephalomyelitis/C... View More

Plastics (Plasticised PVC) flooring manufacturer needs physical laboratory for combustion analysis of condensate from manufacturing operation that pr... View More

Contract Lab needed for valve testing for Leakage; Hydrostatic Strength; Maximum Flow Shut-off; Strength(bending moment, turning effort, impact); Cont... View More

Pharmaceutical laboratory needed for consistency testing by penetrometry as per PhEur 2.9.9, the test material is topical ointment. The assay needs ... View More

USA mechanical laboratory needed for SAE Testing to test 10 air break tubes and 4 gladhands to see if they meet SAE Standards.SAE Standards: J844 (air... View More

Toxicology Laboratory needed for toxicology testing of agricultural fungicide:
Toxicological data on the technical grade material (Animal data)
1. ... View More

Illinois food laboratory needed for sushi rice inspection testing for health department View More

Large pharma needs FDA cGMP laboratory for USP Lanolin foreign related substance testing. Laboratory must have had satisfactory FDA Inspection within ... View More

Texas Laboratory needed for ISO Comparative testing for contact lens solutions to ISO 11981 2nd ed 2009 Ophthalmic optics -- Contact lenses and contac... View More

Certification Laboratory needed for CE certification of material handling system ( Manual over head Gantry). View More

Canada optical laboratory needed to conduct light transmittance tests on two pairs of safety goggles, which claim to filter a specific spectrum of vis... View More

Europe Analytical Chemistry Laboratory needed for ozone analysis for analyzing Ozone when sampled with Radiello tubes RAD 172 and VOCs from Radiello t... View More

USA veterinary medicine laboratory needed for canine serum testing for the breakdown of interferon, interlude in, ect in several blood serum samples ... View More

Optical Laboratory needed for UV Light transmission comparison testing of two Amber production vial produced by two different companies. Company's pro... View More

Maryland environmental microbiology laboratory needed for Environmental surface testing for RODAC Testing: bioburden counts from various surfaces of a... View More

Medical Device Product Safety Laboratory needed for Stability Testing and Biodegradability Testing of Nature latex foley balloon catheter ,Scalp vein ... View More

North of Italy testing house (testing laboratory) needed for EN optical tests over a multi beam safety light curtain for industrial application accord... View More

India mechanical Laboratory needed for brake vacuum tubes testing Temperature Resistance (High and Low)? Ozone Resistance? Burst Strength? Cold Temper... View More

Packaging Laboratory needed for ASTM Testing to ASTM D4169, Standard Practice for Performance Testing of Shipping Containers and Systems View More

USA FDA GMP Laboratory needed for Elemental Analysis by CHNS/O System View More

USA laboratory needed for SAE Testing of Compressed air dryer to SAE specification J2384, desiccant Air Dryers used in vehicles with compressed air sy... View More

Physical Laboratory needed for Optical testing for quality inspection of optical components, such as lens and mirror for Focus length, surface optical... View More

ON-GOING: Automotive Laboratory needed for SAE Testing to SAE J2384 on Desiccant Air dryers used in vehicles. SAE J2384 is a test procedures for desic... View More

Medical Technology laboratory needed for Laser resistance testing per ISO 11810 for disposable surgical drape View More

India Physical Laboratory needed for tube testing View More

Mechanical Laboratories needed for ANSI Testing: Zero turn rotary blade lawn mower safety testing to ANSI/OPIE B71.10-2013, Off-Road Ground-Supported ... View More

Mechanical Laboratory needed for product validation testing for an automotive accessory drive/alternator pulley system. I have the full product valida... View More

Physical Laboratory needed for ISO kink testing per ISO 13868, Telecommunications and information exchange between systems -- Private Integrated Servi... View More

United States Analytical chemistry laboratory needed for /TD GC MS VOC analysis: VOC desorbtion, chromatographic separation and detection. VOCs will b... View More

GLP or Food laboratory with Quality Management System needed for beverage testing for Osmolality in beverage.
Customer need to know if it is isotoni... View More

UK or Netherlands Analytical chemistry laboratory needed for /TD GC MS VOC analysis: VOC desorbtion, chromatographic separation and detection. VOCs wi... View More

Optical laboratory needed for window testing: transmittance of two pre-calibrated magnesium fluoride windows can be implemented. We are looking for a ... View More

Biomedical and Product Safety Laboratory needed for breast implant testing toISO 10993. We would like to test: 1) 2) INTRAGASTRIC BALLOON 3) BREAST I... View More

Food analytical chemistry laboratory needed for ingredient testing to determine composition of test tube of a sauc View More

Medical Device Materials Laboratory needed for contact lens testing services provided for measurement of Ion Permiability, Oxygen Permiability, Power,... View More

Oilfield Product and Service Company needs United States Laboratory for Dimensional INspection and Surface Finish Testing View More

Healthcare System needs Microbiology Laboratory for suture testing to determine the source of a cluster of post operative infections View More

Materials Laboratory needed to test materials to AMS-STD-2154 Standard method for the ultrasonic inspection of wrought metals and wrought metal produc... View More

Analytical chemistry laboratory, preferably located in the UK or Netherlands, needed for VOC desorbtion, chromatographic separation and detection /TD ... View More

Physical Laboratory needed for Optical transmittance Transmittance testing of quantity = 2 (1.00" OD x 0.0275" Thk Diamond windows) for 400 - 700 nm a... View More

Pharmaceutical GMP Physical Chemistry Laboratory needed for full solid state analysis of particles PSD analysis in Active Pharmaceutical Ingredients ... View More

Electrical Laboratory needed for evaluation of electrical system of X-Ray Inspection Vault The vault consist of: · 4 walls and a ceiling · 2 motor dr... View More

USA FDA GMP pharmaceutical laboratory needed for electrochemical impedance spectroscopy and/or Raman optical spectroscopy. Specimens would be of vari... View More

USA Laboratory needed for Mechanical load testing of a pipe/tube clamping device to measure and calibrate clamping force of the device. View More

USA / CANADA Preclinical Virology Laboratory needed for initial proof of concept pre-clinical testing of our compound in regards to anti-viral activit... View More

ISO / IEC 17025.2005 Certified Europe Laboratory with QA System to ISO 9001:2008, ISO 140001:2004) needed for Calcium Sulphite hemihydrate solubility ... View More

UK Genomics Laboratory needed to develop an RNA extraction method/kit for use with blood samples our existing PCR based Biomarker assay. Experience in... View More

India Medical Device Laboratory needed for Radiopecity Testing of Microcatheter (Plastic Extuded component) using X-Ray System-Glenbrook Technologies ... View More

Physical Optical Laboratory needed for transmittance measurements on an optical assembly. The assembly is 7" in diameter and 1" thick, with a clear ap... View More

Singapore or USA medical device laboratory needed for ASTM MRI / radiopaque testing of endotracheal and tracheostomy tubes to ASTM F2503-13, ASTM F22... View More

Pharmaceutical analytical chemsitry laboratory needed for softgel testing for heavy metals and optical rotation View More

FDA GLP United States Bioanalytical laboratory needed for small molecule testing: Biopharmaceutical Classification System BCS Testing for GLP solubil... View More

Canada Packaging Laboratory needed Leak Vacuum Decay Testing on Canisters. As part of quality system, the seal qualification needs to be done before t... View More

California Bioanalytical Laboratory needed for Viscosity testing of a collagen based product. Testing needs to be performed on calibrated equipment tr... View More

Bioanalytical Laboratory needed for Pharmaceutical testing in digestive system such as GERD, gastric ulcer and acid secretion View More

Northern California biochemical laboratory needed for formulation testing to Finalize chemically based optical sensor formulation for use in a disposa... View More

ENvironmental Laboratory needed for zero grade air sampling and testing. rNeed to test Zero grade air produced by our system for residual hydrocarbon ... View More

Electrical Laboratory needed for IEC Testing: Audio, video and similar electronic apparatus - Safety requirements to IEC 60065 and IEC 60268-3:2013Sou... View More

European manufacturer needs Florida or USA Physical Laboratory for ANSI Testing: System testing to the US Market. Their systems are describe below:
1... View More

Medical Device Laboratory needed for Glucose testing of 8 blood collection tubes. View More

USA Mechanical Laboratory needed for automotive parts testing: Ford Spec testing with tube and hose assemblies to ESDS7H-19b591-AA View More

USA Physical Laboratory needed for absorption and transmission testing of optics 4 -2" dia ZnSe lenses, polished and unpolished samples View More

USA physical laboratory needed for optic property testing. I need to test several samples for their absorbance and transmission. View More

Microbiology laboratory needed for biofilm testing to identify composition of the substrate. Company is formulating a product for plumbing systems and... View More

Electrical certification laboratory needed for Electrical certification testing to EU standards for electrical security systems to standards EN50131-1... View More

Materials Laboratory needed for materials analysis of contaminants To identify composition and phases of contaminant particles on the surface of an e... View More

Laboratory needed for IEEE biofuel and biogas testing. Systematic experimental investigations are planned to study the thermal efficiency, fuel consu... View More

Metallurgical Laboratory needed for copper tubes and fittings testing to BS EN 723:2009

Copper and copper alloys. Combustion method for determinati... View More

University Researcher needs Virology laboratory for mycobacterial tuberculosis and related oppurtunistic pathogens testing to screen with isolated phy... View More

Large chemical company needs materials laboratory capable of performing BS EN 1062-6 Paints and varnishes. Coating materials and coating systems for e... View More

Medical Device Product Safety Laboratory needed for ISO10993-5:2009 Cytotoxicity and Sensitization, Irritation or Intracutaneous reactivity testing. i... View More

Cosmetics laboratory needed for Deformulation / reformulation of hair dye (brow tint) Preference to laboratory that can also maufacture product and f... View More

Optical manufacturing company of ophthalmic lenses needs Texas materials laboratory for lens testing of UV-reactive coating for viscosity and water co... View More

Asia analytical chemistry laboratory needed for soap testing: Soap base analysis:

Composition, % ? Palm Oil + Palm Stearin : 80
... View More

USA FDA GMP AND ISO medical product safety laboratory needed for medical devices safety testing of cathether EDV : cytotoxicity, sensitization, irrita... View More

USA Textiles Laboratory needed for ASTM Testing of 16 samples
product is nonwoven textile material
required testing is automotive interior material ... View More

Europe Packaging Laboratory needed for Flexible Packaging testing - OPP-OPP
o Chemical composition of the Material
o Coefficient of friction (C... View More

Petrochemical producer needs laboratory for corrosion inhibitors testing for R&D applications in petrochemical producer including: bble test 2. Parti... View More

Medical Device Preclinical Contract Research Organization needed for Product Safety Studies: System toxicity (acute) for medical deviceTesting collect... View More

Asia FDA GMP analytical chemistry laboratory needed for physical and chemical testing /calibration for a Sintered Porous Stainless Steel filter tube w... View More

East Coast Microbiology Laboratory needed for microbial analysis. Full list of what we need to kill:

Staphylococcus aureus
Pseudomonas aeruginosa ... View More

Biotech company needs United States of America virology laboratory for Ebola disinfection efficacy testing of a UV surface disinfection system. View More

Europe accredited ad member of NANDO materials laboratory needed for flooring system (polyurethane), test on dynamic crack bridging ability in acc. EN... View More

Materials laboratory needed to test UPVC fittings for ISO 1452-2 Plastics piping systems for water supply and for buried and above-ground drainage and... View More

Asia electrical laboratory needed fr CE, UL and RoHS testing:

1. Intelligent Timer 1030950
2. Spectrum Tube Power Supply 1130090
3. Van De Graaff... View More

Aerospace Laboratory needed for Hydrogen Content Testing Hydrogen pickup on titanium tubes after etching in hydrofloric acid to Lockheed spec. mp50063... View More

USDA USA Food lab needed for USDA finely textured pork testing (recovered from advanced meat recovery systems) for the presence of spinal cord or Glia... View More

Dental manufacturing company needs preclinical contract research organization for medical device product safety studies including oxicology and biocom... View More

Asia Biomedical Laboratory needed for Accelerated aging testing for medical implants to ASTM F1980,Standard Guide for Accelerated Aging of Sterile Bar... View More

Microbiology Laboratory needed for microbial efficacy study of UVC-system and hand cleaning solution View More

USA Materials Lab needed for optical testing: materials characterization of room temperature surface reflectivity in the 0.3 nm to 3.0 nm wavelength r... View More

FDA Laboratory needed for evaluation of organic oil marketed under FDA as "personal lubricant". Need oil analyzed as well as tube packaging materials.... View More

FDA Medical Device Preclinical Laboratory needed for medical lubricant testing for FDA 510k: cytotocity., vaginal irritation and systematic toxicity,... View More

Asia analytcal laboratory needed for VOC (volatile organic compounds) testing on laser printers View More

USA FDA registered Food Microbiology Laboratory needed for Food Produce Wash Testing of Produce Wash to eliminate bacteria, like eColi.
Test tube/i... View More

LONG-TERM TESTING: Pharma needs Lab for water Testing of water produced by the company water purification system for resistivity and total organic car... View More

Need to Source a Mainland Europe or Par East Lab to perform retention testing in accordance with ISO 7864:1993, Sterile hypodermic needles for single ... View More

FDA cGMP biomedical laboratory needed for FDA testing of new feeding tube. View More

USA Materials Laboratory needed for ASTM polycarbonate testing to ASTM G153 test cycle 1
environmental weathering testing:

15 flat samples (2x2 i... View More

Chemical Engineering University Researcher needs Canada food laboratory for lycopene testing for the lycopene concentration from different fruits, ve... View More

Europe analytical chemistry laboratory with Quality System needed for ground feed testing for Ceramide total content. Samples: 3 samples of ground fe... View More

Australia Electrical Laboratory needed for EN61235 - IEC60855 Insulating Composite Material Testing of Glass fiber Foam filled insulating tubes of 32 ... View More

Midwest USA laboratory needed for cargo inspection View More

Medical Device Manufacturer needs preclinical contract research organization for ISO Biological Evaluation of "Pressure Monitoring Kits". Tests to be... View More

USA or Mexico technical laboratory needed for MIL Standard, NFPA, ASTM leak detector testing. Needs to perform laboratory tests for leak detectors

... View More

Large Energy Company needs electrical laboratory for electrical testing on grid system. Type Tests - ? Control Type Test?,
Specified test will be pe... View More

Fertilizer Manufacturer needs Middle East Analytical Chemistry Laboratory for Cargo Inspection: Certificate of Analysis confirmatory testing for Ortho... View More

USA Biomedical Laboratory needed for medical device testing: Biocompatibility testing, preservative efficacy testing, condom compatibilty testing, Bi... View More

USA Materials Laboratory needed for ASTM Testing: Optical Testing of Thin film (0.15-.05mm)
Need absorption testing covering UVA and the visible ligh... View More

Consumer Products Laboratory needed for window treatment testing: Roman Shade system testing.
View More

Asia analytical chemistry laboratory for cosmetics testing for determining titanium dioxide in cosmetic products using inductively coupled plasma opt... View More

California Preclinical Laboratory, Contract Research Organization CRO needed for Preclinical testing, biocompatibility, performance and integrity. Ac... View More

Materials Laboratory needed for ASTM Testing of cable to ASTM E 162 / ASTM E 662 / SMP 800C:
ASTM E 162 Standard Test Method for Surface Flammabili... View More

Contract Research Organization required for Oncology sample testing of below test 1.Specific optical rotation 2.Heavy Metals. 3.Residue on ignition. View More

Fruit Juice manufacturer needs food laboratory for food microbiology and sensory quality control testing to improve the quality control system - for ... View More

Electrical laboratory needed for re-designing existing power supply modules (dual power supply,. Triple power supply ,SSR) of air-born systems. We nee... View More

Ontario Canada A2LA or ILAC Materials Laboratory needed for ASTM Testing: Material testing of automotive fasteners. Hardness testing rockwell c and o... View More

Food Laboratory needed for tea inspection to all possible EU standards? such as food safety , Pesticides .. etc? View More

Optical Laboratory needed for Optical Testing: European Standards Testing to DIN 5032 Part 7 Photometry; classification of illuminance meters and lum... View More

AFRICA ENVIRONMENTAL LABORATORY NEEDED FOR ENVIRONMENTAL AIR TESTING AND PRICES FOR THE RADIELLO TUBES View More

FDA cGMP pharmaceutical laboratory needed for analytical chemistry testing:

Identification by IR
Identification by UV
Moisture by Karl Fisher
... View More

Geology laboratory needed for rock testing of Rock samples from tunnel system operations. Require rock classifications and hardness of samples View More

India electrical laboratory needed for IEC Testing Cable tray/ladder system as per International Electrotechnical Commission IEC 61537, Cable manageme... View More

Large Oil Compay needs Materials Laboratory for ANSI / SF Testing 4 samples
Water filtration sump to be tested per the ANSI/NSF 42-2000 standard. Sec... View More

Large computer company needs Materials Laboratory for polymer testing: measuring the light transmission rate through a optical clear PMMA molded half ... View More

USA Pharmaceutical Contract Research Organization needed for preclinical study: lung cancer testing dopamine ( via original novel published apparatus ... View More

Middle East Laboratory needed for ASTM Testing or ISO Testing: 5# samples. a/c systems air outlets( grilles, diffusers & dampers) View More

India analytical chemistry laboratory needed for HPLC analysis of optical brightner: Mobile phase : n-hexane:ethyl acetate =90:10



2 Wav... View More

Midwest FDA GMP Microbiology laboratory needed for microbiology testing of E. coli bacteria-based bioprocessing platform. This involves using agar-ge... View More

Western New York materials laboratory needed for ASTM Testing of brass tubing. 70/30 grade tubing. TUBE > BR 3/8 X 20-1/8 X .0175 WALL ASTM B858-06 Te... View More

Middle East geotechnical laboratory needed for oil recovery studies. inner diameter of slim-tube used in enhanced oil recovery study of the AMAL B res... View More

Electrical Laboratory needed for Optical testing based on EN12966 Testing lumunance and contrast of emitted light (using LED's) within certain beam w... View More

Medical Device Laboratory needed for ISO testing for respiratory tubes ISO 5367, Breathing tubes intended for use with anaesthetic apparatus and venti... View More

FDA cMP, NABL medical device laboratory needed for ASTM testing: Coronary Stent and Balloon Cathether testing of Cobalt Chromium Coronary Stent System... View More

HEALTH CANADA CONSUMER PRODUCTS LABORATORY NEEDED FOR CONSUMER PRODUCTS SAFETY TESTING - KIDS WEAR- ZIPPER METAL PART TESTING TO Nickel EU Directive 9... View More

Materials Laboratory needed for optical testing: Optical transmission @ 185 nm of samples of fused quartz tubing. View More

Asia or Europe geology laboratory needed for Petrographic Examination/Analysis; Staining; Rock Dating, Fossil Identification, X-ray Diffraction; and R... View More

Asia materials laboratory needed for polymer testing to test the polymer tube samples to analyze the composition of the material and any additives. View More

Startup hair growth manufacturer needs ISO microbiology laboratory needed for microbiology quality control testing. Need to evaluate to establish a b... View More

North America Physical Laboratory needed for Burner Testing, CFM 1600F: Physical testing of steel tubes with chrome overlay, different steel substrate... View More

Europe or USA Materials Laboratory needed for polymer testing: comparative testing of radiopacity ASTM F640Comparative radiopacity to ASTM F640 testin... View More

Asia metallurgical laboratory needed for metallurgical testing: cooper testing for copper ore inspection Copper Ore(Cu:10%+-) If you can, could you p... View More

Pharmaceutical Laboratory needed for deionized water testing: TOC analysis for PQ of Water purification system. Speciificaation 10ppb or less Total sa... View More

Consumer Products Analytical Chemistry Laboratory needed for flouride testing of powder fluoride sample: OPTICAL & percentage elemental (ASSAY)analysi... View More

Canada Natural history museum needs Canada Laboratory for specimen testing of animal samples (birds, mammals, amphibians, reptiles) before making them... View More

Manufacturer of PVC Conduits Pipes and fittings , needs approved laboratory for materials testing: British Standard tests in the British Standard BS 6... View More

Accredited Polymer laboratory needed for plastic testing of plastic pellets. Gas chromatography testing on a number of extruded tubes and resin granul... View More

California FDA medical device aboratory needed for FDA certification testing of illuminating device used in sports type scopes. Need to certify if it'... View More

Environmental Simulation Laboratory needed for marine environmental testing: IEC Testing to IEC 60945, Maritime navigation and radiocommunication
equ... View More

India FDA GMP preclinical laboratory needed for preclinical studies. Ex-Vivo Study (Macrophage uptake studies , MTT and apoptosis assay for cytotoxici... View More

PA, NY, NJ, FL, DE medical device laboratory needed for stability testing: shelf life testing of medical device wraps used with cooling system View More

Microbiology Laboratory needed for USP Microbiology Testing to USP 62, Microbiological Examination of Nonsterile Products - Microbial Enumeration Tes... View More

Manufacturer of UPVC roofing sheets needs materials laboratory for ASTM Testing to ASTM D4434/D4434M-11 ?Standard Specification for Poly(Vinyl Chlorid... View More

Automotive Laboratory needed for mechanical testing: Door Slam Testing System: Specifications- Robot(outer slam) & Pneumatic(inner slam)- 4 vehicle av... View More

US Microbiology Laboratory needed for USP Testing: microbiological challenge testing USP51 Testing of liquid dietary supplements (energy shot type) e... View More

MIDDLE EAST COMPUTER LABORATORY NEEDED FOR
PETROLEUM & GAS REFINING SIMULATOR TESTING OF SOFTWARE

DESCRIPTION:-
DYNAMIC REAL-TIME PROCESS SIM... View More

Materials Laboratory needed for DIN Testing of Rubber Closed Cell Elastomeric Thermal Insulation in Tube and Sheet Form to DIN 4102-1, DIN 1988/7, DIN... View More

FDA GMP microbiology laboratory needed for USP testing: microbial testing for water and product samples. water samples from our water system and also... View More

Vancouver Food Laboratory needed for tea testing for Canadian Food Inspection Agency Compliance. Testing of Organic tea made with specific leaves, sen... View More

Toronto Preclinical Laboratory needed for preclinical study testing: Cell Culture
Human pulmonary carcinoid cancer cell lines (H727 and H720) will be... View More

Automotive mechanical laboratory needed for vehicle testing services include - starting system - brake testing - speedometer testing - emission testin... View More

Composite company needs materials laboratory for toxicology, product safety and materials testing: fiberglass composite material, that requires speci... View More

CAP / CLIA Bioanalytical Laboratory needed for bioanalytical testing : IGF-1 by IDS system to ISO 15189 View More

Environmental analytical chemistry laboratory needed for rock testing: spectroscopy laser profilometry to calibrate the depth of laser-induced breakdo... View More

ISTA Packaging Laboratory needed for International Safe Transit Association ISTA testing on the small packaging which is ISTA-3A, Pacaged - Products f... View More

Australia electrical laboratory needed for optical testing of VMS sign design to comply with AS4852 the testing is detailed in the standard it is basi... View More

Large electrical manufacturer needs environmental simulation laboratory for International Electrotechnical Commission IEC Testing of Ground Enhancemen... View More

Electrical Laboratory needed for IEC Testing according to International Electrotechnical Commission iec 61537 Cable management - Cable tray systems an... View More

Certified FDA GMP Pharmaceutical Laboratory needed for USP Testing of zinc oxide cream. Zinc Oxide concentration testing in formulation in tube zin... View More

Electrical Laboratory needed high frequency testing up to 20GHz, along with time domain testing of 10Gbps data rate for Active optical Cable assemblie... View More

Canada materials laboratory needed for physical Testing of lighting for physical and optical properties: Hardness, specific gravity, tensile strength... View More

Washington Environmental laboratory needed for Food Processing (Carbohydrates Testing) HPLC Testing: inulin testing from tubers, with HPLC Dionex, deg... View More

Environmental microbiology Laboratory needed for water testing facilities living apartments to determine if full system-wide problem or it should show... View More

Bioanalytical Laboratory needed for electrophoresis testing. Several samples run on a capillary electrophoresis system equipped with laser induced flu... View More

USA oil laboratory needed for hydrocarbon gas testing. PK Clean's process yields 10-20% hydrocarbon gas, which we recycle as fuel to heat the system. ... View More

USA FDA GMP Bioanalytical laboratory needed for bioanalytical testing CONFIDENTIALgel electrophoresis analyses of human sera for lipase and amylase an... View More

Eastern USA Medical Device Laboratory needed for Medical Device Testing of Hemostasis Valve Introducer Sheath.
1. Valve resistance to flow- Arterial ... View More

Europe inspection laboratory needed. metrology lab to perform Faro insections of tooling weld fixtures and weldments etc, pull testing, weld evaluatio... View More

USA Materials Laboratory needed for ASTM Testing of coating product to ASTM E408Standard Test Methods for Total Normal. Emittance of Surfaces Using In... View More

USA analytical chemistry laboratory needed for chromatography testing of Methane Sulfonic Acid Analysis with suppressor type ion chromatography system... View More

USA FDA GLP Toxicology Laboratory needed for Toxicology Testing. FDA/GLP Biocompatibility Testing. Acute Systemic Toxicity ISO:10993-11
Subacute Tx I... View More

Las Vegas Physical Laboratory needed for physical certification testing: drop ball testing for optical lenses 1.56 hard, AR coated lens View More

Certification Laboratory needed for ANSI certification compliance testing certify compliance with ANSI C12.18 American National Standard Protocol Spec... View More

NY construction laboratory needed for air quality testing, mechanical systems testing, plumbing testing, life safety systems testing, building interco... View More

Asia lightning certification laboratory needed for certification testing for early streamer emission(lightning protection system) View More

Thailand electrical laboratory needed for IEC testing, CABLE TRAY SYSTEMS. AND CABLE LADDER SYSTEMS View More

CFIA Toronto food laboratory needed for CFIA nutritional testing full nutritional facts that are required for the Canadian Food Inspection Agency, and... View More

USA analytical chemistry laboratory needed for vitamin testing: 25-OH Vitamin D assay on a Tosoh AIA System Analyzer View More

Medical Device Research and Development Laboratory needed for prototype development / contract manufacture MEMS of either the cantilever or nanotube t... View More

Analytical chemistry laboratory needed for optical transmissivity testing to gnerate a chart of optical Transmissivity vs wavelength in the range of ... View More

USA Materials Laboratory needed for ASTM Testing of flat coupons to ASTM E408, Standard Test Methods for Total Normal Emittance of Surfaces Using Insp... View More

Asia Physical lightning certification laboratory needed for certification testing for early streamer emission(lightning protection system) View More