NEED LABORATORIES OR LAB SUPPLIERS?

ARE YOU A LABORATORY OR LAB SUPPLIER?

SUPPORT

Questions / Comments?
Call 1-855-377-6821or

Laboratory Requests

Most Recent fine arts Laboratory Requests

Submit fine arts Laboratory Requests

Contract Laboratory has received the following fine arts Laboratory Requests which need to be fulfilled! These fine arts Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their fine arts Laboratory and Scientific Research. If you need a fine arts Laboratory, please Submit a fine arts Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.

Composite Leaf Spring Testing

LONG-TERM TESTING Large Composites Manufacturer looking to forge a partnership with a certified laboratory that can give timely results on composite l... View More

Cosmetics Test Method Development

Experienced Microbiology Laboratory needed for research study to develop new cosmetics microbiology test method . One of the most important parts of ... View More

Sulfuric Acid Mercury Level

Refinery needs USA Analytical Chemistry Laboratory for mercury level testing in a sample of 93% sulfuric acid. View More

FMVSS Adult Car Seat Safety

USA Automotive Laboratory needed for certification of motor vehicle parts to specifically adult car seat safety to FMVSS. View More

Volcanic Rock Mineral Analysis

Artist needs Geology Laboratory for mineral analysis of volcanic rock used in artwork carvings. View More

Automotive Part EMSA Certification

Automotive Laboratory needed for ESMA certification testing for vehicle spare parts View More

ABS Sheet General Motors Corporation Standards Testing

Automotive Laboratory needed for General Motors Corporation GMW Testing of ABS sheet to GMW16853 Comprehensive Standard for Overall Emission Testing o... View More

ISO Contact Lens Compatibility Testing

Medical Device Laboratory needed for ISO compatibility testing to standard ISO 11981, Ophthalmic optics - Contact lenses and contact lens products - D... View More

Plastic Parts Resin Confirmation

BUDGET APPROVED Medical Device Company needs Materials Laboratory resin confirmatory testing of the parts used in 2 plastic disposable infusion sets... View More

ISO Ash Content and Extractable Matter Testing

Large Automotive Parts Manufacturer needs Laboratory that can perform ash content as per ISO 3451 Method A and extractable matter as per ISO 6427. ... View More

SAE Air Dryer Testing

Large Industrial Manufacturing Company needs Laboratory for SAE Air Dryer Testing to SAE J2384 Air Dryer Test Procedure, This Standard defines the Tes... View More

Resin Melt Flow Index

Automotive Parts Supplier needs Materials Laboratory for Melt Flow Index analysis of a resins used in a plastic automotive part by Melt Flow Analyzer... View More

Industrial Propellant Testing

Industrial Laboratory needed for propellant testing to industry standard qualifications and certifications including:
1. Thermal stability and JANNAF... View More

Propiconazole Testing

Agriculture Company needs Laboratory for propiconazole testing for the following:
1. Determine propiconazole in tree vascular tissue within one PPM... View More

Propropiconasole Testing

Pharmaceutical Preclinical Laboratory needed for propiconasole testing for the following:

1. Determine propiconazole in tree vascular tissue within... View More

Ford Automotive Elastomeric Part Testing

USA Automotive Laboratory needed for elastomeric part testing to Ford Spec WSS-M9P8-C. The testing is for elastomeric parts the testing is environment... View More

In vitro anti fungal efficacy test

Italy Pharmaceutical Contract Research Organization needed for In vitro efficacy test on an antifungal compound. The test is a reproduction of a previ... View More

Metallurgical, Mineral and Element Breakdown

Sculpture Firm needs Metallurgy Laboratory for crushed ore, soil and powdered rock composition testing for a full mineral and element breakdown of the... View More

ISO Pipe Testing

Third-Party Laboratory needed for certification testing of DPE pipe PE100 by the following ISO Lab Test methods:

Sample 1 with different wall thick... View More

Oil Modified Sturm Testing

Oil Refinery needs USA Oil Laboratory for OEC 302 CO2 Evolution (Modified Sturm Testing) on oil. Please procide , how much sample is needed, what i... View More

Automotive Parts Wearing Testing

Automotive Laboratory needed for wearing testing on automotive parts such as break pad, break shoes, clutch facing lining,
View More

Art Materials ASTM D 4236

Consumer Products Laboratory needed for art materials testing for Labeling of Hazardous Art Materials (LHAMA) Certifications and ASTM D 4236 Standard... View More

Canvas Material UV Rating

Textiles Laboratory needed for UV rating testing of canvas type material made form 100% polyester to see how long it can be exposed to the sun before... View More

CPSC LHAMA Art Materials Testing

Consumer Products CPSC Laboratory needed for art materials testing in compliance to ASTM 4236 Standard Practice for Labeling Art Materials for Chronic... View More

Integrated Circuit Authenticity

Large Corporation needs Electrical Laboratory for authenticity testing of Integrated circuits to determine they are not counterfeit or refurbished p... View More

Yogurt Probiotics strain refinement

Food Microbiology Laboratory needed for probiotics strain refinement or selection to determine the end of shelf life which probiotic strains in a non-... View More

SAE Automotive Hose Testing

Automotive Parts Manufacturer needs automotive laboratory for SAE testing of a couple of different hoses to hoses for SAE J2064 norm Refrigerant Aut... View More

Jewelry REACH Testing

Fine Jewelry Company needs Laboratory for REACH testing on leather and metal bracelet. View More

JIS Automotive Moisture, Rain and Spray Testing

Automotive Laboratory needed for JIS environmental simulation testing of automotive parts to JIS D 0203 JIS D 0203: Method of moisture, rain and spray... View More

EPA and ASTM Oil Analysis

Oil Laboratory needed for EPA and ASTM testing of tire derived oil analysis to the following Test Methods::
EPA Test Methods 3040 Dissolution Proced... View More

DOT Windshield Testing

Auto Parts Manufacturer needs Automotive Laboratory for DOT Testing of windshields View More

GMW Vehicle Interior Testing

Automotive Laboratory needed for GMW Testing of Vehicle Interior Materials to GMW16853 COMPREHENSIVE STANDARD FOR OVERALL EMISSION TESTING OF INTERIOR... View More

Acoustics proficiency tests for accreditation

ISO 17025 Materials Laboratory needed acoustics proficiency testing to the following ISO Standards:

(1) ISO 354 Measurement of sound absorption in ... View More

United Nations Agriculture Consultant

Agriculture consultant to advice on the tolerance limits of pesticides as defined by FAO Food and Agriculture Organization of the United Nations as pr... View More

Materials Evaluation

Large Corporation needs Laboratory for the evaluation of a material used in the manufacturer of sanitary parts. The material is not homogeneous.The t... View More

Soil Testing for Geological Survey

Environmental Laboratory needed for soil testing as part of a geological survey including the following tests.

1. Laboratory tests of determinatio... View More

Child Resistant Caps Testing

Third-Party, Packaging Laboratory needed for child resistant caps testing for the downward force and torque required to remove the caps need to be wit... View More

Computer DUT Compliance Testing

Computer Company needs Laboratory to ensure DUT complies with mandatory parts of ETSI 201907.
DUT: home network gateway View More

Offer request

Food Packaging Laboratory for food contact applications analysis and certificate of declaration of conformity for paperboard products according to the... View More

Biodegradability of Biomaterial Composites

Laboratory needed for ASTM seawater biodegradability testing of biomaterial composites to determine if the materials degrade in marine water to ASTM ... View More

LONG-TERM TESTING US Automotive Laboratory needed for vendor supplier confirmation cleaning testing of parts used in pumps and turbines to ensure part... View More

Probiotics company needs microbiology Contract Manufacturer needed for manufacturing chemically defined medium for growing Lactobacillus spp View More

LONG-TERM TESTING Metallurgical Laboratory needed for periodic gold content testing of 1 kilogram of 24k gold from a refinery that is sectioned int... View More

Mining company needs California Metallurgical Laboratory for gold testing in parts per million. View More

Fine Furnishings Company needs Materials Laboratory for ASTM Testing to ASTM D648 Heat Deflection Temperature of Plastics View More

LONG-TERM Contract Sterilizer needed for sterilization of a range of measuring fragile medical equipment post contact with human tissue. Components mu... View More

FDA cGMP/ ISO 17025 Pharmaceutical Microbiology Laboratory needed for USP monograph, stability and compliance testing of sterile and non-sterile comp... View More

Laboratory Engineering Company needed for construction and set-up oil testing laboratory for refined petroleum products. The laboratory will carry ou... View More

Polymer laboratory needed for laser transparency testing on plastic nylon parts.The values of laser transparency apply on every 12 points located on ... View More

LONG-TERM TESTING Aerospace company needs materials laboratory for testing new aircraft part including mechanical property testing for composites and ... View More

ISO/IEC 17025 Automotive laboratory needed for resin testing to Mercedes Standard DBL 7384:2015: Supply Specification Coating of plastic parts in vehi... View More

FDA Laboratory needed for UV absorbance test of refined paraffin wax raw material for polyaromatics content as per FDA 21 section 172.886:https://www... View More

Refinery needs materials laboratory needed for determining Mettler melt point in wax View More

LONG-TERM TESTING Polymer laboratory needed for viscosity testing and CT Scanning of automotive molded parts. View More

Food laboratory needed for cheese testing for determination of cheese fat content and vegetable oil/refined oil content View More

AUTOMOTIVE LABORATORY NEEDED FOR VOV EMISSIONS TESTING TO GMW16853 COMPREHENSIVE STANDARD FOR OVERALL EMISSION TESTING OF INTERIOR MATERIALS AND PARTS... View More

Large automotive parts company needs materials laboratory for product testing for the presence of asbestos View More

Toxicology laboratory needed for performing a Toxicology Risk Assessment and Labeling of art materials as per the LHAMA Labeling of Hazardous Art Mat... View More

Oil and petroleum laboratory needed for contamination analysis of an oil used for rust prevention on engine parts, View More

LONG-TERM TESTING Large UK consulting firm needs geological laboratory for monthly geotechnical soil tests including: sulphate reducing bacteria/redu... View More

Plumbing company needs metallurgical laboratory needed for ASTM Testing of brass plumbing parts to the ASTM B858 standard for stress corrosion crackin... View More

Materials laboratory needed for confirmatory testing of jointing materials for sewer drains to DIN 4062, Cold processable plastic jointing materials f... View More

Automotive laboratory needed for several tests on plastics oil pan auto parts including oil pan assembly fatigue resistance (vibration test), M8 bushi... View More

Materials laboratory needed for ASTM Thermal Stiffness property testing as per ASTM D 1043 Stiffness Properties of Plastics as a Function of Temperat... View More

Packaging laboratory needed for various ASTM and ISTA testing of engineered parts packaging including 1) Free drop : Reference Specifications: ASTM D ... View More

Mechanical laboratory needed for testing for the defined residual soiling values (Millipore values) on the surface of of high pressure pipes of diese... View More

Automotive parts manufacturers needs laboratory for accelerated againg of test oil sa including GC-MS headspace and GC-MS direct injection (after dilu... View More

Automotive parts company needs physical materials laboratory for ASTM flammability testing to ASTM D6668 - 01(2016) Standard Test Method for Discrimin... View More

LONG-TERM TESTING Geochemistry laboratory needed for mercury levels testing in mining spoils (tailings) at the parts per million level (mg/kg). Appro... View More

LONG-TERM TESTING Materials laboratory needed for ASTM physical, mechanical, and accelerated aging testing of polymer auto parts to car manufacturers ... View More

Consumer product laboratory needed for CPSC safety testing of an arts and crafts product constructed out of urethane, water based contact cement, hard... View More

Plastics Laboratory needed for Automotive Materials Testing to GMW14797 APOP Painted Plastic Parts Performance Requirements View More

Automotive Parts Company needs VW validated materials laboratory for VW Testing to VW 50180 odor test View More

Physical laboratory needed for DIN Testing of automotive parts to 5.9 Solar Radiation Test as per DIN 75220, D-OUT-F
Test duration 1 cycle = 240 hrs... View More

Oil refinery company needs analytical chemistry laboratory for silicon dioxide testing for determination of % purity (Silicon Dioxide)
Sample is synt... View More

Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to ... View More

Large pharmaceutical company needs GMP laboratory with NPIRI grindometer to measure the fineness of grind on ink products and to perform a color asses... View More

Research laboratory needed for optimization study on ozonators used for water treatment to define the optimal ozone amount for treatment of customer's... View More

Calibration & Repair Services business of laboratory instruments for sale. Manufacturer certified service, Clients in the medical, pharma, food & indu... View More

Oil Laboratory needed for product development testing of diesel and gasoline additive combination with methanol. Previous studies showed the Binding o... View More

Pharmaceutical packaging laboratory needed for USP Polyolefine bottle TOC(Total organic Carbon) test as per USP <661.2>. Please provide us quotation, ... View More

Sensory laboratory needed for sensory fragrance evaluation of pest control and home cleaning products. Must be able isolate and contain fragrance int... View More

URGENT Oil Laboratory needed for American Petroleum Institute API light, medium, heavy and extra heavy oil testing. Need 15 samples analyzed 5 initia... View More

Auto parts manufacturing company needs quarterly check of metal surface for compliance with ANSI B46.1 Standard in compliance with Rz10 requirement in... View More

Automotive parts manufacturing company needs testing of a lubricant certification per ASHRAE -97. The lubricant is a solvent based deforming product t... View More

FDA GMP Laboratory needed for FDA Nebulizer Aerosol Testing:
to FDA 784 Guidance: 27 aerosol tests (1 nebulizer model, 1 flow rate, 3 sample devices ... View More

Manufacturer of rubber parts needs materials laboratory for UL certification testing for a gasket. View More

Cosmetic Testing Needed : Need research to formulate an ingredients list. The ingredients would need to be mostly organic. The purpose would be to com... View More

Laboratory needed for multiple tests on Oil Cooling System including crash, vibration, contamination, fire, oil leakage, thermal cycling, etc:

1... View More

Materials laboratory needed for crack testing in plastic parts View More

Environmental Laboratory needed for mineral analysis in soil samples: X-ray analysis, particle size analysis was carried out on each sample to separa... View More

Food laboratory needed for quinine content analysis in parts per million for tonic syrup concentrate View More

Food Repackager needs microbiology laboratory for fruit, vegetable and environmental testing: : APC, Coliform and Ecoli - Food sample and environmenta... View More

Contract laboratory needed for clay analysis on clay mineral content by XRD ANalysis. For X-ray analysis, particle size analysis will be carried out ... View More

Materials laboratory needed for ASTM or IEC Dielectric Constant Testing for Quench Water, Gasoline, Steam Condensate, Hydrocarbon, and other refinerie... View More

Microbiology laboratory needed for establishing a slf-sustaining microbiome including establish a ratio of microorganisms to populate a small (5cu/mm... View More

Food laboratory needed for food packaging testing of packaged consumer food products for a measurement in parts per million of lead and/or an analys... View More

Materials laboratory needed for Precision surface metrology testing of the inner surface of ring-like metal parts. Contact (precision spindle) measur... View More

Third-party laboratory needed for biodegradability testing of plastic fishing baits for fishing potentially to ASTM D6691Standard Test Method for De... View More

Polymer Laboratory needed for TEM for Determining the difference in crystalline in plastic parts with different colorants using TEM View More

Food laboratory needed for tea testing for caffine levels for a tea product View More

Cosmetics laboratory needed for gluten testing oftest our cosmetics (lip products) . Tests need to be specific to cosmetics (not food) and the lower ... View More

Refined lipids company needs sensory laboratory for sensory taste comparison testing on two oils for several quality aspects including taste. View More

Mechanical Laboratory needed for motor testing of 24 motor assemblies measured for surface roughness (required spec. is Ra 0.4µm max). The surface we... View More

AUtomotive Parts company needs Acoustics Laboratory in Saudi Arabia to perform sound testing of York centrifugal chiller View More

Geology company needs India environmental laboratory for soil and sediment testing: the stream sediment and soil samples are needed to test for multi-... View More

Food Laboratory needed for food safety contact surface testing of rubber wine preserver in full contact with the wine. Testing to ensure it is compl... View More

AUtomotive parts company needs automotive laboratory for General Motors Testing to GMW14609 Corrosion, Simulated 3 g Occupant Load & Downward Strengt... View More

Skincare company needs analytical chemistry laboratory to test unrefined shea butter.
(1) Saponification value of 185 to 195,

(2) Iodine value of... View More

Physical Laboratory needed for thermal and optical properties testing (absorptance/emittance) for a small electronics board (50 mm x 50 mm). The purp... View More

LONG-TERM Eastern Europe laboratory needed for long-term testing of injection, painting and chrome plating of plastic parts for automotive industry t... View More

Large food company needs microbiology laboratory needed to conduct microbial Challenge test on dough (made from refined wheat flour) for predicting B.... View More

Microbiology Laboratory needed for microbial testing of manufactured medical device parts for specific microbiological requirements.
We are a contrac... View More

Materials laboratory needed for Residual Gas Analysis, Raman Spectroscopy or Electron Spectroscopy for Chemical Analysis on our test parts. The size... View More

Medical Device Laboratory needed for EUropean Pharmacopeia Testing of Surgical threads to European Pharmacopeia [8.0] Monograph 01:2008:0324, IDENTIF... View More

Canada laboratory needed to test our waste carts to ANSI specification Z245.30 - 2008 and Z245.60 - 2008. I can provide the documents for the measur... View More

Large transportation company needs physical laboratory for Thermal cycle testing for water charge air coolers with below test requirements. Requiremen... View More

USA Laboratory needed to test aluminum washers according to ISO 16232-5/6/7/8/10 including metallic and non metallic parts, residue wt (mg/cm^2), num... View More

North America Geology Laboratory needed for Trace level analysis of As and Pb in fine grind nepheline syenite samples and low purity quartz materials View More

UK Bioanalytical Laboratory needed for tissue culture analysis using either the JEG-3, JAR or BeWo cell lines. The experiments will involve treating ... View More

Materials Laboratory needed for certification testing of PIR Rigid cold insulation,
PIR (Polyisocynurate) foam segments are high-quality insulating ... View More

Materials Laboratory needed for required Filter Testing (Directly from US Code of Federal Regulators, 40 CFR Part 50 Appendix L,Reference Method for t... View More

FDA Food laboratory needed for food packaging contact surface testing of high quality kerosene normal paraffines n-Paraffin C13, which is used for ro... View More

Midwest USA laboratory needed for halogen lamp degradation study of plastic joining technology for measuring the infrared output of a halogen bulb use... View More

URGENT: MANUFACTURER OF TRACTOR PARTS NEEDS MATERIALS TEST OF PPU & NYLONE ( SOLID IN WEIGHT) View More

US Laboratory needed that is capable of testing bubble (approx 1 micron) counts and distribution in a liquid using Accusizer or similar instrument. D... View More

Manufacture of rubber parts and seals for industrial applications needs materials laboratory for certificaiton testing of seals View More

Materials Laboratory needed to test the absorbance of 5 ZnSe 38mm parts ranging from 8 to 11mm thick. View More

Consumer Products Laboratory needed for Fashion Accessory Testing to ASTM F963 Standard Consumer Safety Specification for Toy Safety for small parts ... View More

Food Laboratory needed for FD&C food color testing on candy bracelet to define if they are FD&C standard. View More

Midwest USA analytical chemistry laboratory needed for magnetic particle testing in Manufacturing Environment. Need parts tested for Magnetic Particl... View More

Food Laboratory needed for nutrional testing of organic sea buckthorn (Sanddorn) : comprehensive breakdown of the nutrients (vitamins, omegas, etc) fo... View More

Canada and USA ISO or AALAC certification laboratory needed for testing and certification of automotive parts (e.g. AMECA or any other certification c... View More

South America or USA Mechanical Laboratory needed for Motor Vehnical Parts Testing to ISO and General Motors Standards: Bumper Product Validation tes... View More

Children's Arts and Crafts company needs India Toxicology Laboratory for Toxicology Testing: LD50 testing on modeling clay for children View More

Europe mechanical and physical laboratory needed for automotive parts testing: ball joints testing for stress resistance, dust seal, tests in environ... View More

Utility company needs laboratory for reliable condition assessment, investigation and IEC Testing on a utility transformer corrosive sulphur problem ... View More

USA Mechanical Laboratory needed for automotive parts testing: Ford Spec testing with tube and hose assemblies to ESDS7H-19b591-AA View More

Physical Laboratory needed for surface roughness testing on 40 parts. Tested on the cylindrical body and chamfeer on the part. I would prefer the tes... View More

USA analytical chemistry laboratory needed for Oat Testing to assay colloidal oat used as OTC active in OTC skin protectant to 21 CFR Parts 310, 347, ... View More

USA Sports Laboratory needed for ASTM Testing of Outdoor fitness equipment to pass ASTM: F2276-10, ASTM F1749-09, and possibly parts in ASTM F887 incl... View More

Southeast USA Laboratory need for Nutraceutical Testing (Assay for content level) of numerous vitamin, mineral and amino acid ingredients, total fat, ... View More

Materials laboratory needed for SEM Imaging / EDX Analysis the surface of a few parts. Parts are non-conductive and will most likely need a metallic c... View More

Africa Environmental toxicology laboratory needed for aquatic toxicology studies of biomarkers in fish for toxins in aquatic habitat herbicide made a... View More

Research Laboratory needed for scientific experiment to define high heating value of solid biomass View More

URGENT: Electrical Product Safety Laboratory needed for EMC (Electromagnetic Compatibility EN 50130-4: 2011) testing for smoke alarms.
We have two m... View More

Plastics Laboratory needed for plastics testing.Test contents in plastic parts.

Ethylaminobenzoate
Heptaoxacyclopentatriacontane
Hexaoxacyclotria... View More

USA Certified A2LA ISO 17025 laboratory needed for Gravimetric Particle Analysis to ISO 16232-7 Plastic Injection Molded Back-up Sensors
2 Part Numb... View More

Malaysia Mechanical laboratory needed for brake pad testing (SASO) on spare parts in Malaysia for e export to Saudi Arabia.
View More

USA materials laboratory needed for Product Performance Testing - Oil Defoaming Test 4 defoamers in Group 1, 2, 3, PAO, Synthetic Ester, Vegetable Oil... View More

US FDA analytical chemistry laboratory needed for FDA cGMP Heavy Metals Testing General Chapter <2232> Heavy Metals

1. Butylated Hydroxytoluene N... View More

Asia microbiology laboratory needed for microbial analysis of refined sugar for clostridium thermosaccharolyticium View More

Importer needs US Food analytical chemistry laboratory for alcohol testing analyze mezcal for it's chemical composition 43% Alcohol by volume analysis... View More

India Materials lab needed for international level of Filter mask testing to provide the best quality of filter mask to Indian citizen in any case. W... View More

USA Radiochemistry Laboratory needed for radioactivity Testing of dental materials by the dental standards ISO 13356 and ISO 6872 by gamma spectroscop... View More

Canada mechanical laboratory to outsource part washing and testing for Ford program - est. annual volume is 850,000 pcs.

DEBRIS ON FINISHED PARTS S... View More

India materials laboratory needed for auto parts testing
View More

USDA USA Food lab needed for USDA finely textured pork testing (recovered from advanced meat recovery systems) for the presence of spinal cord or Glia... View More

ASAP: Automotive Car Parts Manufacturer moving to new manufacturing plant needs for automotive car parts testing of exterior plastic parts like Front... View More

New Jersey Laboratory needed for Microstructure steel / Tungsten testing including: Mount parts. polish, etch and picture the micro structure. View More

Asia Medical Device Laboratory needed for cleaning validation testing on stainless steel implants. Before packaging, we will have an IPA ultrasonic cl... View More

Automotive Parts manufacturer of brake pads and brake linings for cars and trucks needs India, USA or UK Materials Laboratory for failure analysis, q... View More

USA aerospace laboratory needed for aerospace parts testing to find out what material it is made of, it's properties, how thick it is, the finish etc.... View More

REQUEST FOR QUOTE: Hong Kong based arts and crafts manufacturer needs consumer products safety laboratory for Labeling of the Hazardous Art Material... View More

Europe materials laboratory needed for ISO or ASTM Testing. Laboratory tests of Attapulgite clay 1. Oil Absorption and water absorption tests on the n... View More

East Coast Automotive Laboratory needed for automobile headlight testing: headlamps for automobiles and we are having marks show up on the plastic le... View More

Supplier of plastic parts for the automotive industry needs ISO automotive laboratory for GMW testing and ISO testing. Company is developing a new pro... View More

California automotive laboratory needed for automotive compliance testing to GMW 14650 (Performance Requirements for exterior Plastic Part). 2 Parts, ... View More

South Africa Physical Laboratory needed for accelerated weather testing on grp parts bonded with an adhesive. Please find the cycles below: Weathering... View More

Helicopter company located in remote area needs oil laboratory for fuel testing. The fuel we use is trucked to our location as required. We have notic... View More

ANNUAL CONTRACT: Refinery & Petrochemical R&D company needs materials lab for ASTM hydrocarbon Testing for Octane number reported by the engine test m... View More

Medicinal Chemistry Laboratory needed for vitamin testing: Vitamin E content tested in a number of unrefined Sunflower oils, one of them is Flora Sunf... View More

Polymer Laboratory needed for polymer testing studies and failure analysis study: ECE (R-110 and R-67) requirement testing on several polymers and pla... View More

Midwest FDA GMP Microbiology laboratory needed for microbiology testing of E. coli bacteria-based bioprocessing platform. This involves using agar-ge... View More

Physical Chemistry Laboratory needed for OECD Biodegradability Testing for finely micronized insoluble in water wax polymers using either OECD 301B, 3... View More

EU Certification Laboratory needed for ISO safety boots (EN ISO 20347:2012/ EN ISO 20345:2011. Our products are CE certified by TSE (Turkish Standarts... View More

Machine parts manufacturer needs physical chemistry laboratory for particle analysis for studying the fine particle attached to the surface of the arm... View More

Automotive Laboratory needed for automotive parts testing. Brake testing to U.S. Dept. of Transportation, National Highway Traffic Safety Administrati... View More

USA EPA Environmental Toxicology Laboratory needed for EPA Toxicity Testing: Chronic Whole Effluent Toxicity Monitoring Requirements: The Water Quali... View More

Middle East, Asia Mechanical Laboratory needed for automotive parts testing to 6311:2005 -MOTOR VEHICLES METHODS OF TESTING BRAKE LININGS - P... View More

UK Laboratory needed. Polymer Laboratory needed for Specific Melt Resistivity Testing of polyester film chips to define its conductivity level." View More

Norway mechanical laboratory needed for mechanical testing of automotive parts. Tests to be performed on interior parts for the automotive industry. View More

Germany geology laboratory needed for sand testing. Test coarse garnet sand fine garnet sand anthracite
View More

Virginia Laboratory or North Carolina Laboratory needed for clinical testing. Testing done for criminal trial to connect strands of Genital Warts from... View More

Pharmaceutical Product Safety Laboratory needed for Microbiology testing and product safety testing of excipient to obtain GRAS status. Acne: propion... View More

US agriculture and microbiology laboratory needed for crop study using sedimentary pea gravel to grow crops from seed to harvest without any fertilize... View More

Food Laboratory needed for certificate of analysis ingredient testing of protein bars. The COA on the content of the ingredients within my bars. I hav... View More

FDA GMP US analytical chemistry laboratory needed for plastics Extraction testing outlined by FDA 21CFR177.1520 and 21CFR176.170 for molded parts base... View More

Food Laboratory needed for tequila testing: parts per million spirit Tequila Report
I have a report to follow that I need for Japan but its in Spani... View More

Oil Refinery needs Product Safety Toxicology Laboratory for product safety testing for better hazard information. We are interested in testing some pr... View More

Environmental Toxicology Laboratory needed for Chronic ecotoxicity testing on petroleum refinery effluent View More

Aerospace Mechanical Laboratory needed for aerospace parts machinery testing View More

Accredite USA Materials Laboratory Molded parts made of needle-Punched Nonwoven need to be tested to TL52662 material requirements." View More

Asia, Canada, USA or Europe Environmental laboratory needed for soil testing: Cesium 137 isotope analysis in soils from Thailand. 100 samples of dry f... View More

North Carolina Mechanical Laboratory needed for Automobile Packaging testing: Compression testing and incline testing on boxes filled with automotive ... View More

Asia mechanical laboratory needed for plastic Testing of automotive painted plastic parts to GMW and EDS standards for painted plastic parts. View More

Natural Products manufacturer needs medicinal chemistry laboratory needed for analyzing several plants (endemic to certain regions in South America) f... View More

Asia, India or USA Automotive Laboratory needed for vehicle parts testing. Testing of Vehicle spare parts;
mainly for Brake Pads, Filters (Air, Fuel ... View More

Florida Toy Laboratory needed for plush toy testing for: Flammability, toxic, tension, torque, small parts, Phthalates and age grade Thanks

View More

South Sudan geotechnical laboratory needed to Conduct geotechnical investigation at Kidepo bridge site to deternmine the nature and characteristics of... View More

MATERIALS LABORATORY NEEDED FOR MECHANICAL TESTING COMPOSITE MATERIALS, AS FLY ASH FURTHER CRUSHED IN BALL MILLS AND THAT MICRON SIZE FINE POWDER HAS ... View More

Environmental Toxicology Laboratory needed for OECD Testing: Degradation OECD 301C 2 Fate and Behaviour in the Environment (IFF, 2005) Monitoring Stud... View More

Asia mechanical laboratory needed for IEC Testing: Cable test for mechanical parts in IEC60502 & IEC60794 (Armoured LS0H Copper & Optics cable for rai... View More

USA physical laboratory needed for flammability testing to UL 94 Standard for Safety of Flammability of Plastic Materials for Parts in Devices and Ap... View More

Canada materials laboratory needed for mechanical testing, physical testing, consumer product testing for Automotive Parts Importer/Wholesaler and wou... View More

Canada Mechanical Laboratory needed for ISO Testing to ISO 16232, Cleanliness of Components of Fluid Circuits in Road Vehicles, 50 parts of 3.7 g each View More

Asia geology laboratory needed for geophysical testing of andesitic rock for mpa and abrasion index and unconfined compressive strengths View More

Mechanical Laboratory needed for plastics automotive testing to test painted plastic parts test for VW TL 211 Specification. View More

Geology Laboratory needed for IMSBC 2012 testing: Penetration Test and Proctor /Faberger Test for sample of Iron ore Fines Hematitic natural mineral View More

South Africa materials laboratory needed for ASTM Testing and ISO Testing of oil & gas (specifically diesel fuel)to Anti-Corrosion to ASTM 0665
Anti-... View More

India Mechanical Laboratory needed for API Testing for Certifying valve per API RP591, User Acceptance of Refinery Valves View More

Washington Sensory Laboratory needed for on-site odor testing of a fine fragrance liquid cosmetic View More

USA Consumer Products Laboratory needed for dishwasher performance testing: 9 product samples to be tested in repeated dishwasher cycles (100) to dete... View More

USA product safety laboratory needed for We have a dietary supplement testing including API Testing, microbiology testing and chemistry testing. Dieta... View More

India Metallurgical Laboratory needed for materials testing of Miralloy / Trimetal plated Parts . The test requirement is as mentioned below. Please ... View More

Middle East or Europe Materials Laboratory needed for Glass Bulb testing to define PH and corrosion rate of distillated Light Gas Oil (LGO) for differ... View More

Africa Materials Laboratory needed for SANS Concrete Testing to SANS 1083S ATCC Fine aggregates for concrete
Water for concrete View More

Mechanical laboratory needed for abrasion testing by using ABREX equipment. Test item : IEC60068-2-70 Test component : Knob of Automotive interior pa... View More

Large Pharma needs pharmaceutical packaging laboratory for Packaging Testing : packaging anomalies quantitative characterization Analytical : packagin... View More

Industrial Safety Laboratory needed to Precisely define the limits of styrene flammability in our processes and potentially allow us to fine-tune our ... View More

USA Occupational Health, Analytical Chemistry Laboratory needed for raw material testing of blend of Nonionic surfactants, polymeric sequesterants, wa... View More

Materials Laboratory needed for ASTM Testing to ASTM G85 02-A4: Corrosion tests on aeronotical parts 3 samples View More

Europe ISO FDA GMP Pharmaceutical Analytical Chemistry Laboratory needed for pharmaceutical GMP stability testing. In particular, a number of pharmace... View More

Electronics Laboratory needed for fuse testing. The fuse is rated at 15 amps 250 VAC. We can supply the currently approved vendors parts and the new s... View More

China, India Mining Laboratory needed for preferential precipitation testing of cassiterite ultrafine particles (less than 20 micron) in the process o... View More

Analytical Chemistry Laboratory needed for petroleum distillate testing for characterisation Relative compositions of following parameters:
C-chain ... View More

Analytical Chemistry Laboratory needed for pKa Testing: pKa of hydrophobic compound (MW: 461). If experimental analysis is not feasible due to water... View More

Large Cosmetics Company needs USA bioanalytical, immunology laboratory for allergen testing: quantitative determination of potential allergen compound... View More

Utah Metallurgical Laboratory needed for soil testing and liquid testing for precious metal parts per million View More

India Plastics Laboratory needed for plastics testing of 2,2(1,2-ethenediyidi-4,1-phenylene bisbenzoxazole% for CaCO3% testing ,Al2O3% testing,Bulk d... View More

India Materials Laboratory needed for ASTM Testing: Melting Temperature, degradation mechanism, calculating molecular Weight by gel permeation chromat... View More

Materials Laboratory needed for oil analysis of refined petrolem oil. need know class and grade-light crude, sulfur, density,flash point,kinectic vosc... View More

Physical mechanical laboratory need for Cold fuel pressure drop testing to maintain fuel heating performance
Return flow type heater + Filter ASSY: ... View More

Europe Microbiology laboratory needed to create a series of Salmonella enterica serovar Typhimurium strains with defined point mutations." View More

US Analytical Chemistry Laboratory needed for Competitive brand analysis (reverse engineering) to determine ingredients of liquid material used to cle... View More

Oil Refinery needs Middle East petroleum laboratory for oil analysis of heat stable salts in Amine sample,bu any method View More

West Coast USA consumer safety laboratory needed for toy testing toy that consists of many small plastic parts with different solid colors. The compo... View More

UAE, ASIA ENERGY LABORATORY NEEDED FOR IEC TESTING LUMINARY TEST : IEC60598 with several parts View More

ENERGY LABORATORY NEEDED FOR IEC TESTING LUMINARY TEST : IEC60598 with several parts. View More

Eastern USA metallurgical laboratory needed for analyzing a rust condition on fuse holders (on a PC Board) as to the following:

1)Root cause of the... View More

Non-destructive Laboratory needed for non-destructive testing: X-ray inspection of zinc die cast parts to detect internal cracks or flaws: parts quant... View More

Pittsburgh or Eastern USA Mechanical Laboratory needed for Mechanical load testing: A total of 86 steel separate parts are to each be loaded to a for... View More

Pharmaceutical Company needs bioanalytical laboratory for human cell testing for Cu(I) level in cultured human cells. If direct measurement of Cu(I) i... View More

Pharmaceutical analytical chemistry laboratory needed for European Pharmacopia Testing of HDPE (porous & tube material) tested for 3.1.3 Polyolefines ... View More

US FOOD CERTIFICATION LABORATORY needed for third party certification testing of food equipment used as part of a seasonal or annually-renewing health... View More

Food Analytical Chemistry Laboratory needed for Hot Pepper Mash Testing
Heat index as Scoville Units, Moisture,Water content, Grinding (Fineness), Sa... View More

East Coast Materials, Mechanical Laboratory laboratory needed for aluminum analysis used in a die casted part. Comparison of two similar parts from tw... View More

Large computer company needs Massachusetts Metallurgical Laboratory for metal content analysis to analyze platinum content from a sample of finely cru... View More

Europe Oil and Petrolem Laboratory needed for ASTM, ISO or GPA Testing of natural gas fixed gases, methane ethane, propane, butanes, pentanes in pm; C... View More

Automotive Test for Polyurethane Foam to NES STANDARDS: METHODS OF THERMAL CYCLE TESTING FOR PLASTIC PARTS, METHOD OF TESTING THE SMELL OF INTERIOR P... View More

USA Analytical Chemistry Laboratory needed for ASTM Testing on oils: sulfur analysis, phosphorus analysis, and metals analysis on 2 types of oil. 1) ... View More

India Materials Laboratory needed for ASTM Testing, durability tests like RCPT , Chloride bulk diffusion test to ASTM C1202 , for our Btech project o... View More

Geochemistry laboratory needed for Feldspar testing Fine Powder 200 Mesh and Lumps. Components to be covered under sampling: (100% by Weight) * Silica... View More

Large Auto Manufacturer needs A2LA Mechanical Laboratory for Mechanical Testing - Fatigue Tests Automotive Parts as per GMW3172 Standard.
Typical Tes... View More

FDA GMP and GLP Analytical Chemistry Laboratory needed for USP testing of ingredient: European Mistletoe (Viscum album). We are actively searching for... View More

Toxicology Laboratory needed to test a product known as Strauss Heartdrops, one of the ingredients is European Mistletoe (Viscum album). We are active... View More

Plastics and Polymer Laboratory needed for Nissan Engineering Standard
MO135 Weatherability and light resistance test methods for synthetic resin... View More

Southern California Geology laboratory needed for ASTM geochemical testing: rock core tests including point load, modulus of elasticity, slake durabil... View More

Australia Environmental or Agricultural Laboratory needed for soil testing: pH testing ,elemental testing , macro and micro nutrient testing, carbon t... View More

Large multinational company needs Minnesota physical analytical chemistry laboratory for onsite purity testing of a High Pressure, High Purity CO2 Ski... View More

Toxicology Laboratory needed for BSEN 117 toxicology testing for toxic value of a wood preservative against the
Reticulitermes species of the Europea... View More

MATERIALS LABORATORY NEEDED FOR NISSAN STANDARD TESTING FOR PAINTED EXTERIOR PLASTIC PARTS FOR THE AUTOMOTIVE INDUSTRY. View More

USA Metallurgical/Analytical Chemistry Laboratory needed for testing 2 small stainless steel parts to start (we are looking for long term lab partner ... View More

North America ISO Physical Laboratory needed for testing as per ISO 16232, technical cleanliness of metallic engine parts
particle size and quantity,... View More

Automotive rear view mirrors manufacturer needs Materials Laboratory to perform roughness testing on the ground edge of the mirror. Mirrors range in ... View More

Electrical Laboratory needed for electronic reliability characterization testing - Electron Beam Moire or other methods to chronicle fine movement of ... View More

Midwest USA ASTM JIS Automotive Laboratory needed for testing chrome plated plastic a parts on Ford WSB-M1P83 B2, Chrysler PS-8810, Nissan M4063 [2001... View More

USA Non-GLP Histology Laboratory needed for stent testing:
48 coronary stents to be embedded in SPURR, 6 sections per stent, stained with H&E and ela... View More

Georgia or Southeast USA ISO Physical Laboratory needed for ISO 16232-10 Testing including
-Parts must be cleaned with solvent, used solvent filtered... View More

USA Physical Laboratory needed for abrasion testing on several nylon parts. View More

FAA Analytical Chemistry Laboratory needed to test the chemical which can be used for runway rubber removal in accordance with FAA advisory circular g... View More

WestCoast USA Analytical Chemistry Laboratory needed for the following testing:
(1)Catcracker feedstock analysis items include:API, Specific Gravity(... View More

Eastern USA metallurgical labroatory needed for trace metals analysis 10 samples of carbon inks that were made on a piece of equipment where the suppo... View More

Microbiology Laboratory needed for microbial testing such as coliform test, pathogenic tests for edible refined vegetable oil View More

British Columbia, Physical Laboratory for thermal cycling testinf for parts. View More

Microbiology Laboratory needed for microbial testing such as coliform test, pathogenic tests for edible refined vegetable oil View More

South Carolina ISO Automotive Materials Laboratory needed for testing as per ISO 16232, technical cleanliness of metallic engine parts View More

ISO Materials Laboratory needed for testing plastic parts on pilot ladders as per ISO 877:1994 View More

MIDWEST USA PHYSICAL LABORATORY NEEDED FOR IPC-1752 CLASS 6 TESTING FOR APPROX 15 COMPONENT PARTS THAT ARE MADE INTO ONE ASSEMBLY View More

SAE/ASTM Automotive Materials Laboratory needed for testing automobile interior carpet parts. They are body trim (textile), tailgate trim (textile), f... View More

Analytical Chemistry Laboratory needed for BTU testing on some pulverized samples of different parts of trees grown at varying densities and with vary... View More

Industrial Manufacturer needs USA/China Physical Laboratory for cleanliness testing of industrial parts to millipore spec class B View More

Southeastern USA ISO Electrical Laboratory needed for Dimensional Testing of small electronics parts in accordance to ISO TS 16949 - 5 parts 100% dime... View More

Refinery needs Asia Analytical Chemistry Laboratory for ASTM testing View More

ISO Materials Laboratory needed for testing plastic parts on pilot ladders as per ISO 877:1994. View More

FDA GMP Bioanalytical Laboratory needed for EP Dissolution Testing of Medicated Chewing Gums using apparatus such as defined in EP Pharmacopoeia. View More

Global Trading Company from Myanmar needs Automotives Materials Laboratory to test Auto Spare Parts. View More

Physical Laboratory needed for USP Absorbency Test on 2 samples of Cotton.

Procedure- Prepare a test basket, weighing not more than 3 g, from coppe... View More

Geotechnical Laboratory needed for testing unconfined compressive strength. View More

Minnesota ASTM Physical Laboratory needed for the following: Screen the air-dried bulk samples through a 6.3-mm (0.25-in.) screen in accordance with A... View More

USA Materials Laboratory needed for testing as follows: LP-12012 Exterior Silencer - Water Absorption and Shedding Lab Test Procedure LP-12013 Ext... View More

Phillipines Geotechnical Laboratory needed for Rock Mass Characteristics Testing;
Point load tests, Unconfined Compressive Test, Direct Shear test, T... View More

SAE Laboratory needed for fog testing four small plaques to SAE J1756 using gravimetric procedure. These parts will be adjacent to windows in a truck.... View More

Asia Boeing approved Laboratory needed for BSS 7230 Flammability testing, Smoke test and Heat release test for composite parts used in aircrafts As pe... View More

Montréal or Toronto Consumer Products Safety Laboratory needed to perform safety tests on 3 components (small parts) destined to young children betwee... View More

ISO 17025 Laboratory needed for testing in accordance to ISO 10993 Parts 3,5,6,7,10,11&15 View More

Canada Mechanical Laboratory needed for Pressure Cycling & Thermal test to be done on a charge air cooler, destined for truck engine in accordance to ... View More

India Mechanical Laboratory needed to perform thermal shock experiment on plasma sprayed Zirconia- ceria oxide powder coatings on SUS 304 and Mild Ste... View More

USA Environmental Laboratory needed for trace analysis of soil and water samples for Bisphenol S (CAS # 80-90-1) Down to parts per billion View More

USA and China Product Safety Laboratory needed to develop a battery of analytical testing to evaluate different batches and formulations of consumer a... View More

SW Arizona Geotechnical Laboratory required for testing:
*unconfined compression-rock ASTM D 2938
*unconsolidated-undrained triaxial compression AST... View More

GMP Quality Control Pharmaceutical Laboratory required for testing for release of the following excipients:
Glycerol distearate(according to EP);
Dl... View More

USA Analytical Chemistry Laboratory needed for Refinery Fuel Gas streams molecular weight and the carbon content analysis This is in regards to Green... View More

Asia ISO and SAE Laboratory needed for Filter Testing. We are looking the vendor who can do the below listed tests and have minimum ISO 9001 or ISO17... View More

Asia ISO 9001 or ISO17025 Physical Laboratory needed for ISO 5011 Filter Testing
Air Filter
ISO 5011 Life, Eff and Restriction

Fuel Filter
S... View More

USA Analytical Chemistry Laboratory needed for Resveratrol Testing, Micronized, and Resveratrol 99% Water soluble, Both have HPLC & COA, outside count... View More

Materials Laboratory needed for testing dozen different coatings we apply to medical devices. What we want tested is having the parts that are coated ... View More

India Weathering Laboratory needed for weathering testing or printed self adhesive vinyls pasted on polycarbonate sheets tested for outdoor weathering... View More

ASTM laboratory for chemical testing of RTV sample as defined in ASTM D471. The RTV is to be verified by subjecting to the vapors of the following lis... View More

Laboratory to test urology device.
Encrustation test with proteus mirabilis
Endpoint is time to blockage /encrustation
Test protocol has been defin... View More

Florida ANSI laboratory to test lead on 3 small metal parts. View More

FDA GMP analytical chemistry laboratory needed for photostability exposure study. Subject API to light conditions as defined by ICH Option 1. View More

Industrial parts washer manufacturer needs physical laboratory for cleanliness testing of industrial parts to match customer's millipore spec View More

Eastern China Physical Laboratory needed for FMVSS 201Testing for automotive interior parts View More

Large Automotive Mfg needs Russia Physical Laboratory for automotive component testing sunroof and cockpit Operating Noises, Squeaks and rattles carac... View More

Large electronics mfg need IPC-TM-650 2.3.28 Ionic Chromatography testing as process qualification on modled electronics parts This test is required ... View More

India Contract Research Organization needed for invitro antiviral study of papilloma virus(Causing Warts) by using an aqueous plant leaf extract. View More

Fine Arts Museum needs dating testing to confirm the approximate age and possible country of origin of a sliver of artist canvas with paint possibly f... View More

Analytical Chemistry Laboratory needed for Gravimetric Analysis Testing of plastic injection molded parts using . View More

Materials Laboratory needed for ASTM Testing, ASTM F 801 Optical Deviation testing of Transparent Parts View More

INDIA MATERIAL LABORATORY NEEDED FOR ASTM MECHANICAL TESTING COMPOSITE MATERIALS, AS FLY ASH FURTHER CRUSHED IN BALL MILLS AND THAT MICRON SIZE FINE P... View More

MATERIALS LABORATORY NEEDED FOR MECHANICAL TESTING COMPOSITE MATERIALS, AS FLY ASH FURTHER CRUSHED IN BALL MILLS AND THAT MICRON SIZE FINE POWDER HAS ... View More

Mechanical Laboratory needed for thermal, combustion testing, glycerol combustion experiments and would like to measure the acrolein emission in the e... View More

Geochemical Laboratory required for whole rock geochemistry, pyrolysis, total organic content (TOC) etc). The rock samples are from drilled cores (oil... View More

FDA, GLP Bioanalytical Laboratory required for GLP assay that can measure plasma levels of Terbinafine and its inactive metabolites (SDZ 86-621 (the N... View More

ISO 17025 Analytical Chemistry Laboratory needed to conduct analyses for chemical substances. In the framework of the REACH legislation we need to ana... View More

USA, Canada Toxicology Laboratory required for ISO 10993, parts 5 and 10 View More

Analytical Chemistry Laboratory required to measure the aromatic content in a re-refined base oil. Cost and amount of oil needed for testing.
View More

Toronto Mechanical Laboratory needed for Rockwell Hardness Testing, material check, tensile and yield strength on fastener-type parts. View More

USA analytical chemistry laboratory needed for speciation on vanadium in two wastewater stream in a refinery. These two streams are desater brine (hi... View More

CA cosmetics analytical chemistry laboratory needed for formulation of scented oil, cyclomethicone based liquid fragrance with a fine glitter or silic... View More

Children's toy manufacturer needs north american FDA, GMP, ASTM and ISO Product Safety Laboratory for deformulation of food items, and other products ... View More

Large Medical Device Manufacturer needs US Analytical Chemistry laboratory to produce a number of chemically treated metal parts. The methodology req... View More

USA & South Africa & New Zealand Clinical Contract Research Organization needed for PK testing of plasma/serum and nail clippings for terbinafine and ... View More

Large Medical Device Manufacturer needs USA biomedical labroatory for validation testing including production of a number of chemically treated metal ... View More

Asia FDA GMP Food Analytical Chemistry Labroatory needed for testing food contact plastic parts molded from Glass Reinforced Nylon, and Teflon. View More

USA EPA Environmental Toxicology Laboratory required for 40 CFR 158.2100 defined testing for microbial biopesticide for EPA registration. View More

Europe DIN 4102 Parts 15/16 - Brandschacht (B1)Certified Materials Laboratory needed for product safety testing - fire prevention on textile fabrics View More

Texas Plastics/Materials Testing Laboratory needed for several plastic inj molded parts which need to have their respective grade,type, filler polymer... View More

Europe CE EN 71 Materials Laboratory needed for product safety testing EN 71 Parts 3, 7. View More

North America ASTM Materials Laboratory needed for ASTM biodegradability testing, oxo-biodegradable additive, prodegradant for polyolefins (film, shee... View More

USA Materials Laboratory needed for ASTM biodegradability testing, oxo-biodegradable additive, prodegradant for polyolefins (film, sheet)

We conta... View More

Asia Analytical Chemistry, Materials Laboratory needed for recertification testing of Polycarbonate Resin, old grade which are over 2 years (the guara... View More

United States CPSC, UL, CE, Prop 65 Materials Testing Laboratory needed for testing small parts ban & lead paint according to CPSC Importing Regulatio... View More

California ASTM D5865 - 07a(modified) Materials Testing Laboratory needed for BTU Testing. HDR Engineering is working with a solid waste authority th... View More

USA ISO 13356 Radiochemistry Laboratory needed for testisng. The radioactivity, defined as the sum of the mass activity of 238U, 226Ra, 232Th is deter... View More

Eastcoast USA Metallurgical Laboratory needed to accurately tensile test fine diameter wire with an optical extensometry system. View More

Europe Plastics and Polymers Laboratory needed for standard Luposol Stress Crack Testing on plastic parts injected in PE-HD for the automotive industr... View More

Germany Biomedical laboratory needed for a German biopharmaceutical company searching for an animal model for IBD / Celiac disease.

Our client deve... View More

Analytical Chemistry Laboratory needed for testing of a burning beeswax candle
(samples provided)
for the production of negative ions
within a conf... View More

USA lab needed for crock testing of wool felt hats and any other tests to define risk of bleeding under normal use. Possible analysis of dyes, water r... View More

Canada product safety lab with NFPA, EN 1127-1 and/or AN/NZS 4745 certififications to test samples of petroleum coke fines to determine if the materia... View More

California EPA Environmental Lab needed for testing water and sludge from cleaning metal parts made from brass, stainless steel and aluminum View More

Engineering laboratory needed for determining the oil content on metal parts. View More

Mechanical Laboratory needed for testing car parts View More

Physical wethering lab needed for ASTM Salt Spray Corrosion Testing. 500-hour environmental salt spray testing for various small parts used in ceiling... View More

Analytical Chemistry Laboratory needed for testing spent aircraft de-icing fluids from various airports and define differences. View More

Analytical Chemistry Laboratory needed for longterm contract testing foam glass compositions: 5 samples, no smaller than
3"x3"x2" and no larger than ... View More

Analytical Chemistry laboratory needed for testing and development of nutritional beverage for production and direct to consumer sales. Lab requiremen... View More

Physical laboratory needed to test knee implants to ASTM F 1223. We are a Brazilian company that produces knee implants. We are needing to quote these... View More

Analytical Chemistry laboratory needed to perform Icing Test according to RTCA DO-160E Section 24 A & B For two separate parts, one is moving and big ... View More

Metallurgical laboratory needed to verify that steel parts are madeof required 304stainless steel. Company sourcing steel parts in Asia and would lik... View More

Analytical Chemistry Aqueous for testing biological sample, HPLC method with electrochemical detection. Method developed at analytical lab, may need ... View More

Physical laboratory needed to test super fine flour for cosmetic use, 80% go through the 400 mesh seive. An alpine Air Jet Sieve is an idea instrument... View More

Materials lab needed for testing ceramic/glass samples for a process that needs further refinement. I will submit sample parameters and the lab must ... View More

Materials laboratory needed for testing PMI finished parts View More

Automotive laboratory needed for parts validation testing. View More

Analytical Chemsitry Laboratory needed for cleanliness verification testing of stainless steel parts after cleaning View More

Engineering Firm needs metallurgical laboratory for microhardness testing of case carburized parts View More

Analytical geological laboratory required to define the constituent elements in an ore sample (mass spectroanalysis icp mining samples). Trace element... View More

Materials laboratory neded for material failure analysis of a steel housing and analysis of a weld. (Determine if the failure was do to the material... View More

Metallurgical laboratory needed for zinc element analysis testing on casting zinc parts View More

ISO 17025 Laboratory needed for Refinery Fuel Gas sample testing including Full hydrocarbon compositional analysis including unsaturates and hydrogen.... View More

Materials labroatory needed for Refined petroleum age estimation/determination testing View More

Analytical chemistry laboratory needed for chemical & mechanical testing on plastic injection moulding parts.
View More

FDA GLP, AAALAC oreclinical laboratory needed for Testing in 2 parts. Part A. Mass Balance of Radioactivity Elimination in Rabbits Dosed Dermally with... View More

Mircobiology laboratory needed for investigating the effect of our patented "energy oscillations" on bacterial cells. For that reason we would like to... View More

Automotive materials laboratoryneeded for testing of plastic parts (cockpit, door trim) for Automotive market. View More

Physical laboratory needed that specializes in testing and dating paper documents and works of fine art. View More

FDA GMP preclinical laboratory needed for in vivo P-450 inhibition testing in rats & in vitro human liver cell P-450 effect w/ apitoxin. P-450 inhibit... View More

Analytical Chemistry Laboratory needed for testing of Petroleum Hydrocarbon,phenol,poly aromatic hydrocarbon, heavy metals and inorganic compounds in ... View More

FDA GMP industrial hygiene laboratory needed for testing to characterize ultrafine particles in an air stream generated by a medical device. View More

Analytical Chemistry laboratory needed for testing Oil refineries fuel gas which would include hydrocarbons including the possibility of sulfur compou... View More

Electrical Laboratory needed for ASTM Characterization Testing of Polymer Parts: Dielectric constant, dissipation factor, volume resistivity, surface ... View More

Product Safety Laboratory needed for EN and ASTM Product Safety testing including for finished Wooden Toys and small Wooden Arts & Crafts item, approx... View More

Microbiology laboratory needed for Residual Efficacy Testing of Disinfectants. To test the efficacy of a known disinfectant product with a formula mod... View More

Materials laboratory needed for testing PE pipe to define types and amounts of materials used in as well as the different kinds of PE (HD or LD) and t... View More

Product Safety laboratory needed for toy testing soft doll and related doll clothing for flamability, small parts etc. View More

USA Product Safety Toy Laboratory needed for ASTM child safety testing of planks (maple wood blocks) for small parts, sharp points and edges, durabili... View More

Materials laboratory needed for acoustics testing of noise attenuation material requirements Rw=30dB

Measurement shall be according to:
ISO 140-P... View More

Construction laboratory needed for IAQ testing and smapling including: Formaldehyde, 50 parts per billion, Particulates (PM10) 50 micrograms per cubic... View More

Clinical laboratory needed for measuring local estrogens and androgens in the abdominal fat and fine needle aspirate in the breast View More

Materials laboratory needed for testing a magnetic very fine substance View More

Analytical and radiological laboratory needed for BP93 testing of X-ray detectable yarn made from polypropylene and loaded with a high content of bari... View More

Materials Laboratory needed for ASTM High temperature Testing of GPC-polypropylene
also possibly FTIR on sample parts View More

Analytical and radiological laboratory needed for BP93 testing of X-ray detectable yarn made from polypropylene and loaded with a high content of bari... View More

Food analytical laboratory needed for testing vanillin content in Vanilla Beans from different parts of Asia. View More

Fine art production company needs physical laboratory conducting UV resistence accelerated study. Company currently reproduces fine art using offset... View More

Physicl laboratory needed for DIN Flammability Testing as per DIN 4102 Parts 15/16 - Brandschacht (B1) View More

Physical laboratory needed for testing two compounds by capillary rheometry: Tests performed at 100°C, 120°C; Tests performed over a minimum shear rat... View More

Physical laboratory needed for materials testing of cement for fineness, composition, heat of hydration View More

Analytical laboratory needed for fuel permeation testing to General Motors test method 5113 on nylon 6 parts. View More

Analytical laboratory needed for physical properties testing of waterbased and solvent based paint for: viscosity, dilution stability, flashpoint, re... View More

Analyticallaboratory needed for testing total utilizable lipid, protein, and carbohydrate of seed samples (acorns and maple seeds). Samples have alre... View More

Laboratory needed to measure Rockwell F scale hardness on small powdered metal parts View More

Europe microbiology laboratory needed for RTCA, AITM, ASTM testing for Fungus Resistance (Pilzbeständigkeit)in aeronatutical parts (honeycomb core san... View More

Corrosion testing (H2S & NACE BRINE)for some Aluminum machined parts with coating on them.
View More

European physical laboratory needed for Experimental modal analysis at high level of amplitude (500 until 1000 N or more) on parts of a rocket engine ... View More

ISO Laboratory needed for testing Pesticide/insecticide ready to use, in liquid (DIFLUBENZURON - class benzoylureas - formulation OF ,60g a.i./l). Tes... View More

-ASTM F1148 PERFORMANCE TESTING FOR TOYS:
-LABELING AND INSTRUCTIONAL REVIEW
-BEARING ATTACHMENT
-Hazardous Products (Toys)
-Mechanical Hazards ... View More

Automotive manufacturer needs laboratory for physical and electrial Testing the operating performance of the car in extreme winter climatic conditions... View More

extraction and qualitative characterization of polyolefines for pharmaceutical primary packagings. Tests should be performed according European Pharm... View More

bulk density,gridy matter,volatile content and fineness of powder. These tests required during tooth powder production. View More

1) Intense ecotoxicity with Mysidopsis juniae with new dilution in order to define the variable value of CL50 (96H).

2) Biodegradability test of th... View More

Karl Fischer measurement of surface bound water content of fine inorganic powders (Calcium phosphates). View More

Acid soluble Arsenic Testing by the cosmetic, toiletry and fragrance association (CTFA) method F1-1, parts IA and II. This colorimetric silver diethy... View More

surface roughness and contour measurement of plastics.On-going inspection of molded plastic parts. 6 measurements/part, approx 250 parts in 3 wks, on-... View More