Contract Laboratory has received the following Transportation and Shipping Laboratory Requests which need to be fulfilled! These Transportation and Shipping Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Transportation and Shipping Laboratory and Scientific Research. If you need a Transportation and Shipping Laboratory, please Submit a Transportation and Shipping Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
Automotive Laboratory needed for the following ASTM Testing on a 60x40x25 Shipping Case:
Hazard Type ASTM D4169, DC 13 Test Schedule Referenced ASTM Standard
Shock / Drop Schedule A Manual Hand...
Large corporation needs physical laboratory for failure analysis of injection molded waterproof housing submitted to a leak test, t. It has been observed that air bubbles are coming out at some locations that coincide with a knit line, there is a theory...
x-ray and cross section, and test results report.
Construction materials laboratory needed to conduct ASTM and AASHTO testing of asphalt binder to ASTM D2006 Method of Test for Characteristic Groups in Rubber Extender and Processing Oils by the Precipitation Method and AASHTO T 315-12, Standard Method of...
Shipping company needs laboratory for hose bend testing of 6 hoses that need doing bending test according to EN1765 standard. Electrically discontinuous Hydrostatic tested, Vacuum tested. Oil Suction and Discharge Hose hose id:12 ID x 30' OAL working pres...
Petroleum laboratory needed for Texas Department of Transportation Testing to Tex-501-C, TEST METHODS FOR VARIOUS BITUMINOUS MATERIALS - Test for water content, % by mass.
Tex-501-C, TEST METHODS FOR VARIOUS BITUMINOUS MATERIALS
Packaging laboratory needed for ASTM transportation testing for the new medical device packaging box according to ASTM D4169-09 as per below: Please help to quote the test as below, Distribution Cycle 13, Assurance Level III. Test sequence as below: 1....
Shipping vessel owner needs Spain laboratory for bunkered fuel analysis
?Asphaltenes, Ash, Carbon Residue
?Sulfur Content, Hydrogen Sulfide
?Pour Point, Stability
?Total Sediment Potential (TSP)
Laboratory needed for DOT Jerrican (2.2-gallon portable fuel container) Testing per Department of Transportation (DOT) ?Subpart M: Testing of Non-Bulk Packaging and Packages CFR / I / C / 178 ? Specification of Packages, Sections 178.603, 178.604, 178.605...