What can we help you with?
Contract Laboratory has received the following glass and glassware Laboratory Requests which need to be fulfilled! These glass and glassware Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their glass and glassware Laboratory and Scientific Research. If you need a glass and glassware Laboratory, please Submit a glass and glassware Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
Materials Laboratory needed for ANSI ballistic testing for monolitic glass to ANSI Z26.1 lab tests applied to six different references of ballistic l... View More
FDA Biopharmaceutical Release, Stability and Container Closure Integrity Testing
Biopharmaceutical Company of recombinant therapeutic proteins needs FDA GMP Laboratory for Release, Stability and Container Closure Integrity testin... View More
ANSI Flat Glass and Tempered Glass Testing
USA Physical Laboratory needed for ANSI flat glass and tempered glass testing including:
Ball Drop test, Edge stress, surface stress, laminated g... View More
Large Electrical Company needs Laboratory for glass gems composition testing View More
Optical Laboratory needed to determine the transmission properties of glass to determine it's use in solar panels View More
Transportation Industry Glass Testing
LONG-TERM TESTING Glass corporation needs a partnership with a large international laboratory for testing their glass used in the transportation secto... View More
fiberglass / Glassfiber reinforced plastic FRP/GRP pipes
Laboratory needed for ASTM testing on fiberglass / Glassfiber reinforced plastic FRP/GRP pipes needed for oil and gas project
1. Full regression test... View More
Mirror Interferometric Wavefront Error Measurement
Independent Laboratory needed for wavefront error measurements of parabolic mirrors (FL=50mm, F/0.5) with a central 30-mm hole by interferometric mea... View More
Plastics Material Identification
Polymer Laboratory needed for testing to determine the materials used in making a plastic product to determine if it is PA6 or PA66, Glass filled, Bea... View More
Chalcogenide Glass Vapor Pressure
Materials Laboratory needed for determining the vapor pressure of a chalcogenide glass sample at 800C. View More
Tint Measurement of Glass or Plastic
PRODUCT DEVELOPMENT Product Design Company needs India Optical Laboratory for measuring the tint of plastic or glass View More
Unknown Materials Identification Testing
Large Corporation needs Materials Laboratory for unknown materials identification to determine if the piece is is glass or acrylic. View More
Forensics Laboratory needed for failure analysis of a notable color difference between glass bottles used for bottling whiskey including a chemical an... View More
ASHRAE Refrigeration Oils Testing
Large Corporation needs Third-Party Laboratory for ASHRAE Testing of refrigeration oils for sealed glass tube test as per latest ASHRAE-97 test proce... View More
ASTM Candle Holders Thermal and Shock Resistance
Third-Party Laboratory needed for ASTM Materials Thermal and Shock Resistance of glass candle holders to ASTM( AMERICAN STANDARD TESTING MATERIAL) AS... View More
Glass DIN Resistance to Attack
Third-Party USA Laboratory needed for DIN testing of glass type S1, S2, S3 as per DIN 12116 Resistance to attack by a boiling aqueous solution of hydr... View More
Large Manufacturer needs Physical Laboratory for ASME testing of Fiberglass Product FRP for the following:
Lap shear test
Compress test
Glass con... View More
Industrial Laboratory needed for glass testing for the below mentioned details
1. Thickness ,
2. Light Stability
3. Boil Test,
4. Penetration Tes... View More
ASTM Glass Bottles and Glass Jars
Manufacturer needs Materials Laboratory for ASTM testing of glass bottles and glass jars exported to the US markets.as per ASTM ( AMERICAN STANDARD T... View More
CNAS/ NATA Accredited Testing Facility
CNAS/ NATA Accredited Construction Materials Testing Facility needed for BS Glass impact test based on BS EN356 Glass in building. Security glazing. T... View More
Third-Party Laboratory needed for SASO testing of tables (furniture) to SASO 1587 & SASO 2454 (for tables with glass) View More
Cellular Adherence Study with HeLA, BAE, SH-SY5Y Cells
Bioanalytical Laboratory needed for Cellular Adherence R&D Study on 2D glass samples with 4 different types of nanotechnology surface coating on 3 di... View More
Bonding validation by ageing test according to appendix 3 of the DVS1618 is needed for glazing that is produced for the train industry. View More
Large Manufacturer would like to buy an automatic polymer viscometer for the testing of PET material IV to ASTM-D4603 .Standard Test Method for Dete... View More
Auto Parts Manufacturer needs Automotive Laboratory for DOT Testing of windshields View More
Food Analytical Chemistry Laboratory needed for Scoville Heat Unit testing in 10 retail products (various pepper based sauces pasteurized in glass in ... View More
FDA Medical Adhesive 510k Equivalence
FDA Medical Device Laboratory needed for validation, evaluation, and toxicology testing of UV medical adhesive (USP class VI) that is used integrat... View More
Construction Safety Glass Testing
Safety Laboratory needed for ANSI/ ISEA testing of construction safety glasses to ANSI/ISEA Z87.1-2015 American National Standard for Occupational and... View More
Textiles Laboratory needed for work garment testing of fibers for fiberglass and or plastic fibers and View More
CPSC Consumer Products Laboratory needed for ASTM Testing of the following 4 painting products to ASTM D-4236, Standard Practice for Labeling Art Mate... View More
ASTM Coating Testing - ASTM D4086, ASTM E1477, ASTM E1347.
Materials Laboratory needed for fiberglass pool.coating testing to 3 ASTM Standards ( ASTM D4086, ASTM E1477, ASTM E1347) to determine a dry lightness... View More
Automotive Laboratory needed for BMW Standards testing to BMW PR 241 glass roofs
BMW PR 263 windshields View More
Materials Laboratory for tempered glass testing for possible manufacturing deficiencies View More
Pharmaceutical Company needs packaging laboratory for container closure integrity for container.packing : 10/20 L glass bottle Volume: 1-16L View More
Physical Laboratory needed for ASTM Testing of phenol impregnated glass fiber cloth to (ASTM 297, sandwich tensile test). View More
LONG-TERM TESTING Materials Laboratory needed to measure the haze of a sapphire coating on glass View More
Materials Laboratory needed for infrared transmittance testing on on laminated glass. View More
LONG-TERM TESTING Food Laboratory needed for shelf-life stability testing for cooked meals in vacuum-sealed glass jars including pH, water activity, m... View More
Materials Laboratory needed for comparison testing of a new coating for light transmissivity test done on two pieces of glass coated with the old coat... View More
FDA Certified Laboratory needed for FDA drop ball / lens impact testing of sunglasses to FDA 21 CFR 801.410 drop ball / lens impact test. View More
LONG-TERM TESTING Aerospace company needs materials laboratory for testing new aircraft part including mechanical property testing for composites and ... View More
Laboratory needed to measure nicotine captured by (1) passive air filters, and (2) surface dust wipes.Specifically, the air nicotine needs to be analy... View More
Materials laboratory needed for ASTM Testing of plastics to ASTM D2990 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep, R... View More
Automotive laboratory needed for ANSI testing of glazing materials (glass) to ANSI Z26.1, American National Standard
for Safety Glazing Materials
f... View More
Automotive laboratory needed for a chemical compatibility verification procedure to ASHRAE 97 standard, Sealed Glass Tube Method to Test the Chemical ... View More
Materials laboratory needed for reflectivity measurements for Anti-Reflection AR coated glass plates. The glass plates are 4.75 x 3.75 x 0.063 in size... View More
LONG-TERM TESTING Plastics laboratory needed for acetaldehyde and viscosity testing of PET to 2 ASTM standards:
for acetaldehyde according ASTM F2013... View More
Accredited materials laboratory needed for DIN EN testing of glass reinforced plastic part adhesives to DVS 1618/DIN 54457 test of lap shear strength ... View More
ISO 17025 accredited automotive materials laboratory needed for solar / UV simulation testing of automotive laminated glass to DIN 75220, Z OUT condit... View More
Consumer Products Safety Laboratory needed for FDA sunglasses safety testing by drop ball test method to Standard LT-1 July 12, 1971 21 CFR 801, 410 M... View More
FDA cGMP consumer products laboratory needed for impact resistance testing of sunglass lenses to (21 CFR 801.410(d)(1) f300 unit test View More
Physical laboratory needed for mechanical durability testing of industrial glass tubes. View More
Consumer Products laboratory needed for standardized testing of eyeglass cleaning solutions. View More
Engineering company needs materials laboratory for environmental simulations testing of GRP (Glass-Fibre Reinforced Plastic) ground anchor for UV st... View More
Construction Materials Laboratory needed for strength and durability check of glass reinforced fiber GRF material. View More
Analytical chemistry laboratory needed for glass fiber testing for sulfur content View More
Polymer laboratory needed for Tg (glass transition temperature) testing of a polyacrylate, which is provided in an emulsion. Determination of Tg of a ... View More
Glass laboratory needed for ballistic impact testing to meet NATO standards 1, 2, or 3 to MIL SPEC Level 4. View More
Analytical chemistry laboratory needed for chemical composition testing of fiber glass yarn. View More
Optical filter laboratory needed for transmissivity from UV testing through the visible spectrum of three filter glasses with the assumption two are b... View More
Environmental simulation laboratory needed for testing glass that has been treated with a liquid. View More
FDA Consumer Products Safety Laboratory needed for sunglasses testing to meet FDA regulations for importation. View More
Materials Laboratory needed for Glass transmission testing for float glass View More
Materials Laboratory needed for 3000 hour accelerated aging testing of plastic connector made from polyamide 66+ 30% glass fiber, in order to see th... View More
weathering test following TSM0501G with Suga machine model : WEL-SUN-HCH type sunshine Weather-O- meter for the following: 1 Discharge voltage ( V) R... View More
Materials laboratory needed for haze and luminous transmittance tests for glass or plastics View More
Environmental Laboratory needed for mineral analysis in soil samples: X-ray analysis, particle size analysis was carried out on each sample to separa... View More
Lab Needed for light transmittance of float glass ASTM E308 illuminant A.. View More
Analytical chemistry laboratory needed for Glassware Inhibitory residue test -on powdered hand wash laboratory glassware detergent. test needs to be p... View More
India consumer products laboratory needed for sunglass testing View More
Contract laboratory needed for clay analysis on clay mineral content by XRD ANalysis. For X-ray analysis, particle size analysis will be carried out ... View More
Materials Laboratory for soda lime silicate float glas and silver mirror testing for Radiation properties, Thermal Resistance and thickness of glass ... View More
Materials laboratory needed for ASTM Dielectric Testing: Dielectric Strength and Water Absorption (RT 24h) to ASTM D149, Standard Test Method for Di... View More
Lighting company needs optical laboratory needed for spectral transmittance measurement services. on quartz glass tubing 26mm I.D x 32mm O.D. (3mm wa... View More
e-liquid company needs packaging laboratory for packaging teting of glass and LDPE Plastic bottles to Title 16, Part 1700.20, Testing procedure for sp... View More
Europe pharmaceutical laboratory needed for biopharmaceutical method development and method validation and routine GMP Testing of parenteral lyophiliz... View More
Physical laboratory needed for ASTM Flame testing to ASTM A136 fiberglass enclosure. View More
Sports company needs optical laboratory for specific spectrum data of lens in 6 different sports environments. For example, the sports glasses used fo... View More
Consumer Products Laboratory needed for ANSI sunglasses testing to and certifiy sunglasses witht he ANSI rating. View More
Materials laboratory needed for ASTM boat cleaner testing on fiberglass and wood to determine it is effective and non-harmful in cleaning grease, oil,... View More
European Union food laboratory needed for beer testing to determine the hydrolyzed gluten content in beer, in 2 kinds of beer.
We fill our beer in ... View More
Electrical laboratory needed for IEC testing of tape (synthetic) used in the fire resistance cables to sustain up to 800 deg celcius of temperature ... View More
Physical laboratory needed for Glass strength testing for food container. Glass shock testing for breakage. View More
Consumer Products Performance Laboratory needed for Claims testing for eyeglass lens cleaning wipe to support claims: Non Scratching, Non Streaking, ... View More
Performance laboratory needed to conduct comparison test study betwee light curing adhesives activated by UV lights.
The side by side tests we wo... View More
India Pharmaceutical Laboratory needed for European pharmacopoeia and United States Pharmacopoeia Testing of Tubular Glass Vials (transparent & Amber ... View More
Optical Laboratory needed for eyeglass testing for the amount of green and blue light that can pass through the lenses used in our eyeglasses. View More
Physical Laboratory needed for compression testing of fiberglass and silica based cloth that range in thickness from 1/8 to 0.165 View More
Eye wear company imports eyeglass frames from Italy and would like FDA GMP laboratory for certification testing that frames are made from FDA approve... View More
India materials laboratory needed to perform Tests required for Material of Gland Packing. Glass Ply OR Carbon Fibre Ply, Silicon OR Made of Ceramic F... View More
Large piping company needs East Coast North America materials laboratory for ASTM Testing of six o-ring elastomer samples for DMA analysis to measure... View More
Medical Device Laboratory needed for EUropean Pharmacopeia Testing of Surgical threads to European Pharmacopeia [8.0] Monograph 01:2008:0324, IDENTIF... View More
Materials laboratory needed for ASTM Testing: Abrasive resistance test on our Abs Glass filled material as per ASTM D 1044. Please specify testing fea... View More
EPA LEED, USGBS Environmental Laboratory needed for Formaldehyde Testing in building products. Laminate truss, urethane foam adhesive, wallboard, ... View More
India Physical Laboratory needed for determining thermal co-efficient of expansion tested for 72 glass fibre reinforced plastic (fibreglass) rods of v... View More
Consumer Product Safety Laboratory needed for Drop Ball testing of Class 1 Medical Device - Sunglasses. Testing of 500 units View More
Manufacturer a counter top material with recycled window glass and an epoxy resin binder needs physical laboratory for NSF / ANSI / ASTM Physical Prop... View More
Microbiology Laboratory needed for 5mL Endotoxin challenge testing of vials for our Oven validations, I was wondering if you would be able to prepare... View More
Electrical Laboratory needed for AC & DC electrical conductivity testing for fibreglass used in ladder stiles. Need to test using method described in ... View More
California Materials Laboratory needed for ASTM Testing to ASTM E228 -11 standard test method of linear thermal expansion of solid materials with a pu... View More
FDA Packaging laboratory needed for USP / EP testing of glass molded vials and ampoules. 1. Arsenic release test as per USP/EP2. Soda Extract test as ... View More
URGENT: Materials Laboratory needed for ANSI fiberglass panel testing for 2 different fiberglass panels. Burn test, flex test, and drop ball test. View More
Materials Laboratory needed for ANSI and FMVSS autoglass testing: U.S standard auto glazing testing in accordance with ANSI-Z26.1-1996 and FMVSS 205? View More
Nanotechnology laboratory needed for nanomaterials testing of clean coating for glass and ceramic surfaces by accredited tests: EN ISO 11998 and certi... View More
Northeast / Mid Atlantic USA analytical chemistry laboratory needed for polymerizaiton and formulation studies: Alkyd type chemistry with accelerated ... View More
Consumer Products Laboratory needed for sunglass testing: FDA drop ball testing View More
Middle East materials laboratory needed for ASTM Testing: barcol hardness test glass reinforced plastic to ASTM D 2583, Standard Test Method for Inde... View More
USA Geology Laboratory needed for Quality Control pumice testing: scratch-hardness of artificial pumice aka foam glass scouring sticks. We are inter... View More
California Laboratory needed for sunglass testing: Impact resistance test / drop ball test View More
Materials Laboratory needed for destructive testing of sapphire cover glass.
Dims, 132(l)x60(w)x0.7mm(thk)
Surface finish less than 3 nanometers.
T... View More
Jewelery manufacturer & exporter needs REACH testing on glass. Please include tentative costing that may be incurred in this test and approximate time... View More
Large engineering firm needs Middle East Laboratory for Acoustics Testing for GRP (Glass Reinforced Gypsum) panels will be used on the project. These ... View More
Glass company needs Materials laboratory for NABL certification testingfor Test Certificate of Fibre Glass product . View More
URGENT: Materials Lab needed for ASTM testing.
1.-pH (ASTM D1287).
2.-Density (ASTM D5931).
3.-Water content (ASTM D1123).
4.-Alkaline reserve (AS... View More
USA Laboratory needed for non-destructive analysis on a small work of art (a miniature painted or enameled on glass)
View More
USA Performance Laboratory needed for comparative testing of crushed glass filter media to be used in pool sand filters. The testing requirements are ... View More
USA Materials Lab needed for optical testing: materials characterization of room temperature surface reflectivity in the 0.3 nm to 3.0 nm wavelength r... View More
USA Physical Laboratory needed for impact resistance testing on our safety glasses and the NRR on our earmuffs. We would only have 3 pairs for testing... View More
Manufacturers of consumables for the Civil Aviation Industry need India or Asia laboratory for FAA Testing. Tests as per FAA as well EASA test protoco... View More
Mechanical Laboratory needed for mechanical testing to EN 13121-3,GRP tanks and vessels for use above ground. Design and workmanship
a. Textile Gl... View More
Manufacturer of fiberglass and acrylic bathtubs and showers needs Canada certification laboratory for CSA certifications CSA B45.5, CSA B651." View More
USA mechanical laboratory for corrosion testing of Two samples of Engine Coolant to ASTM D1384, Standard Test Method for Corrosion Test for Engine Coo... View More
Australia Electrical Laboratory needed for EN61235 - IEC60855 Insulating Composite Material Testing of Glass fiber Foam filled insulating tubes of 32 ... View More
Materials Laboratory needed for film testing to ISO 4892-2 Part 2 Method B Cycle 5
Material: PET and Polycarbonate films, which are electrically con... View More
Large engineering firm needs physical chemistry laboratory for Particle size distribution testing of particulate samples collected on 3" glass or quar... View More
Custom House brokers needs physical laboratory for sunglass testing: drop box test of sunglasses View More
Helicopter company located in remote area needs oil laboratory for fuel testing. The fuel we use is trucked to our location as required. We have notic... View More
Europe Microbiology Laboratory needed for Antibacterial rate testing.
Test Organism- Escherichia coli
Test product- Air Filter (made of fiberglass ... View More
University Researcher needs packaging laboratory for leakage measurement testing within the alcoholic beverage industry to look at different materials... View More
Materials Product Safety Laboratory needed forANSI Safety Testing to ANSI Z26.1 standard. 1996 Safety Glazing Material for use anywhere in motor vehic... View More
New York materials laboratory needed for glass testing to determine thickness for a given colored
filter glass at various transmissions
and at freq.... View More
Europe chemistry laboratory needed for chemical analysis for chemical composition by X-ray fluorescence spectrometer EXPERT-4L and ICP spectrometer OP... View More
FDA GMP Midwest USA Pharmaceutical Packaging Laboratory needed for FDA Container Integrity Testing: CCI Testing either Dye Immersion or Container Clos... View More
Microbiology laboratory needed for microbiology testing: Microbial Growth testing on several glass grinding coolants to ASTM E2275 Standard Practice f... View More
Asia electrical laboratory needed for IEC Testing: Determination of the halogen acid gas content in GRP/FRP(Fiberglass Reinfored Plastic) to IEC 60754... View More
Materials Laboratory needed for EN safety film testing to BS EN Standards: BS EN356, Glass in building. Security glazing. Testing and classification o... View More
New Zealand FDA GMP materials laboratory needed for Solubility testing of ceramic (glass ceramic, surface area >30cm2) in acetic acid. We supply you ... View More
Composite company needs materials laboratory for toxicology, product safety and materials testing: fiberglass composite material, that requires speci... View More
Southern California Materials Laboratory needed for coating testing. Test light transmittance of a coating that is on a glass slide. We have 3 slides ... View More
India Plastics Laboratory needed for glass testing: fiber orientation of the injected molded component of material N66 composed of 65% polyamdie ,35%G... View More
India analytical chemistry laboratory needed for cerium oxide testing to verify the percentage of cerium oxide compound, not the metal, but the glass ... View More
California FDA GMP Laboratory needed for FDA impact testing to 21CFR801.410 impact testing Select 200 pcs random samples of sunglasses from 8200 pc l... View More
South California Toxicology Laboratory needed for toxicity testing for lead, cadmium, for a colorful hand-painted reading glass with matching hand pai... View More
Israel, USA or China plastics laboratory needed for glass fiber testing: Silica Glass Fiber Cord
Polyethylene terephthalate fiber
Silicone covered F... View More
Food Packaging Company needs Canada food laboratory for food packaging testing. we have a glass container. While rinsing before filling with food, som... View More
USA Plastics Laboratory needed for Fiber reinforced Plastic coupon testing 1) Glass content, wt percentage. 2) tensile strength, 3) flexural strength... View More
India Plastics Laboratory needed for Testing as per IS 12866:1989 for light diffusion of Fibreglass Reinforced Polymer Roofing Sheet View More
USA Materials Laboratory needed for ASTM Testing to ASTM D7490-08 to Measure surface tension - energy of glass windows View More
USA FDA GMP Consumer Products Laoratory needed for FDA impact testing for the import of sunglasses View More
USA Materials Laboratory needed for ISO material testing (glass ionomer liquid/powder system)to ISO 9917-1:2007 Dentistry - Water-based cements - Pa... View More
UK or Europe Laboratory needed for EN Testing to EN356 of glass range View More
Construction Materials Laboratory needed ffor insultation testing:Sound absorption of various insulation materials. Materials such as fiberglass insu... View More
UK physical laboratory needed for optical testing.. Compare light transmittance between two touch sensor variants.
Construction 1:
4mm plain glas... View More
Textiles Laboratory needed for fabric emission testing of E-glass fabric coated on both sides with an intumescent coating. In qualifying the fabric we... View More
Engineering laboratory needed for security glazing, BS EN 356-2000 axe testing to BS EN 356-2000 Glass in building. Security glazing. Testing and cla... View More
Middle East or Europe Materials Laboratory needed for Glass Bulb testing to define PH and corrosion rate of distillated Light Gas Oil (LGO) for differ... View More
India analytical chemistry laboratory needed for analytical chemistry testing. All the below testing by DSC instruments for lyophilizer project 1) Tm ... View More
Pharmaceutical Analytical Chemistry Laboratory needed for USP Testing 1) Tm Melting Temperature
2) TE Eutectic Temp
3) TG Glass temp
4) T... View More
South Africa, UK, USA or Europe Analytical Chemistry Laboratory needed for USP Testing: Powdered glass test for USP type 1 glass. View More
India Preclinical Toxicology Laboratory needed for Intracutaneous Reaction Studies
1.Glass Ionomer cements
a) Restorative/Luting Cement
b) Restore... View More
Large Pharma needs pharmaceutical packaging laboratory for Packaging Testing : packaging anomalies quantitative characterization Analytical : packagin... View More
UAE Industrial Hygiene Laboratory needed for occupational health Testing of Benzene and Glycol exposure monitoring tubes.
Following is the detail ... View More
European Union electrical laboratory needed for EN electrical testing to EN 60684-3-409:1999 : Break-down voltage testing, temperature resistance test... View More
India materials laboratory needed for option testing of Tempered Glass by optical and light View More
Food Manufacturer needs USA Food Laboratory for foreign materials testing in garlic minced products, such as stone, glass, peel...etc. View More
GOVERNMENT IS REQUESTING ELECTRICAL LABORATORY FOR ASTM ELECTRICAL TESTING ON FIBERGLASS MATERIAL #ASTM-D-150 -AC LOSS CHARACTERISTICS AND PERMITTIVI... View More
USA Consumer Prodcuts Laboratory needed for USP Microbiology Testing: US (USP61 + 62) Test item Claire's US Requirement Total viable count (TVC ) ... View More
USA Canada or UK materials laboratory for materials testing, packaging testing, glass XPS and XRF analysis of glass bottles View More
Government needs India Materials Laboratory for materials testing of materials used for fiberglass boats, which are currently being used.
View More
Materials Laboratory needed for ASTM Testing and ISO Testing of Glass Samples: 30 Glass samples to be tested for:
- Compressive Strength
- Thermal... View More
Materials Laboratory needed for radiation absorption tests performed on a few 8.5" x 11" sheets of zeolited coated fiber glass wallpaper. View More
Physical Laboratory needed for BS Testing to BS EN 356, Glass- Security glazing- Testing and classification of resistance against manual attack View More
Northern California Oil Laboratory needed for ASTM Testing for quality of fuel recovered from automobiles and trucks prior to crushing and scrapping.... View More
Midwest optics laboratory needed for ASTM Testing to ASTM C770-98, Stress Optical Coefficient (aka Brewster's Factor) of a glass composition. View More
Asia sunglass distributor needs optical materials certification laboratory to verify sunglass lens meet CE standard or ANSI standards (Z80.3.2010). P... View More
FDA Consumer Products Laboratory needed for clinical consumer Products study Personal Lubricant compatible with condoms
Certain number of women sho... View More
Europe Materials Laboratory needed for ASTM Testing: thermal conductivity measurement services to ASTM C-1461 or ASTM E1530 for fiber reinforced (glas... View More
California FDA Medical Device Physical Laboratory needed for lens drop ball testing of magnifying glass shipment held at FDA. We are requested to su... View More
Electrical Laboratory needed for EMI shielding effectiveness testing and surface resistivity testing of Glass fiber mat (wallpaper) View More
India ISO Pharmaceutical laboratory needed for EP Testing, USP Testing:
1. ES-FBS
2. Amphoterecin B
3. Gentamycin
4. DPBS
5. Tryple E
6. Alpha ... View More
Materials, Optical Laboratory needed to test Index of refraction of glass plates IR - 1.517. The plates are from glass BK7 and are in the dimension of... View More
California FDA GMP consumer safety laboratory needed for impact resistance testing on reading glasses View More
Physical Laboratory needed for compressive strength analysis of Glass Ionomer cement with Instron machine having maximum compressive strength of 500 m... View More
Colorado or Oregon Consumer Products Laboratory needed to compare specs of several national brands of sunglasses View More
Germany physical laboratory needed for thermal testing: Laminating glass test
1. Humidity test according to EN ISO 12543-4
2. High temperature t... View More
California FDA GMP Consumer Products Physical Laboratory needed for FDA Impact Resistance test on sunglasses View More
Materials Laboratory needed for ASTM E903 Solar Transmittance of Materials using a Spectrophotometer Measurement of spectral transmittance of laminate... View More
Consumer Product Safety Laboratory needed for AnSI testing to ANSI Z80.3 for sunglass, fashion eyewear requirement View More
Physical Laboratory needed for glass haziness testing on material as per TSM 0503G. View More
Materials Laboratory needed for BOCA testing fiberglass railing system as per BOCA requirements. View More
Optical Laboratory needed to test the refractive index of a new glass at 1550nm. The material is available in form of lens and can be available in bl... View More
Optical Laboratory needed for performing glass haziness testing. View More
Ontario, California FDA Mechanical Laboratory needed for drop ball testing on pinhole glasses, similar to sunglasses. There are 3000 pairs in a shipme... View More
USA FDA Consumer Products Safety Laboratory needed for testing rubber sunglasses for:
Bisphenol A
Phthalates
Lead
For polycarbonate lenses:
UV ... View More
Eastern USA Mechanical IEC Electrical Laboratory needed for ASTM testing on fiberglass sticks used by the utility industry in accordance to IEC60855-... View More
Mechanical Laboratory needed for Mechanical properties testing - Mechanical resistance, young/Elastic modules,Tensile strength, Compressive strength a... View More
USA, Asia, Europe Consumer Products Safety Laboratory needed for performance tests to residential A/V furniture Stability, Strength, Tip Over, Mechan... View More
USA Physical Laboratory needed for Water - Rain Simulation Testing, 8 hr. water test of full size car body w/ doors and glass. Testing seal between do... View More
Asia AS Consumer Products Safety Laboratory needed to test sunglasses as per AS 1067/2003. View More
Ophthalmic Lens Coating Company needs Midwest USA Optical Laboratory for measuring reflectance (%R), at 45 degree AOI of a thin film coating on a (fla... View More
Hillsboro, OR Optical Laboratory needed to test light transmittance or solar module glass View More
GMP/USP Packaging Laboratory needed for container closure integrity testing: vacuum decay method (f.e. Wilcomat)
approx. 20 * 100ml glass bottles View More
USA Thermal Laboratory needed to determine the glass transition temperature of a air dried sugar film. The Tg is expected to range from -70 to 100 oC... View More
Ontario, Canada Mechanical Laboratory needed to conduct dynamic mechanical testing on a rubbery polymer to determine the glass transition temperature.... View More
California Environmental/Microbiology Laboratory needed for testing fiberglass concentration in air/house;mold View More
Westcoast USA ASTM Analytical Chemistry Laboratory needed for testing chemical composition of surface deposit on clear glassware as per ASTM D859. Det... View More
Westcoast USA Analytical Chemistry Laboratory needed for testing chemical composition of surface deposit on clear glassware. Determine if organic or i... View More
FDA GLP or FDA GMP Bioanalytical Chemistry Laboratory needed for pH testing, Osmolality testing on FDA approved drug product to treat cancer, murine r... View More
UAE ASTM or BSI Physical Laboratory needed to check the Glass Transition Temperature of the Fiberglass Material by Differential Scanning Calorimeter. View More
Los Angeles FDA Mechanical Laboratory needed for standard FDA Test for Sunglasses - called a 'drop ball' test. Ball is dropped on the lens's to ensur... View More
USA Analytical Chemistry Laboratory needed for comparison of two lots of borosilicate glass type 1. Quantitative elemental analysis including zircon... View More
Physical Laboratory needed for water vapor transmission of paint and plastic film, thermal conductivity and shrinkage of glass reinforced plastics tes... View More
USP/EP Laboratory required to test glass vials in accordance to USP and EP View More
India Physical Laboratory needed for Glass Testing: Optical testing, Toughness testing, Transperecny testing, Magnification etc
View More
Certification Laboratory needed for ANSI Safety Glasses testing that need certification testing View More
New Zealand Histology Laboratory needed for paraffin embedding of glutaraldehyde-fixed pericardial tissues. cut thin sections of each sample and stai... View More
Indian laboratory to test fiber glass panels used for making water tanks, for portability of water cytotoxicity test,as per IS14399. View More
Thailand laboratory for testing glasses - CE MARK View More
Physical Laboratory needed for melt viscosity testing on a glass filled acetal part that fractured and compare the results to a good part. View More
Optical Laboratory needed for REALD testing of circular polarized lens Film to make 3D glasses. We are looking for a testing house to perform 3rd part... View More
Plasma asher service is needed to ash rat lung tissue with plasma asher (400 W, at least 16 hours) we have about 200 lung samples in small glass vials... View More
Israel Packaging Laboratory needed for package integrity tests for a carton package for glass bottles that are medical device and need to be shipped w... View More
Tennessee Forensics Toxicology Laboratory needed to confirm glass and/or fiber optic cable particles in blood and stools View More
Eastern USA FDA Product Safety/Analytical Chemistry Laboratory required for alcohol content of beverage, shelf-life, should beverage be stored in cool... View More
USA Materials/Toxicology Laboratory needed for testing fiberglass duct liner material: Specific Optical Density ASTM E662; Flammability ASTM E-162; ... View More
UK, Europe European Pharmacopoeia (EP) 6th Ed 2008 Section 3.2 Materials Laboratory required to test Pharmaceutical glassware for hydrolytic resistanc... View More
India STC, NRC Acoustical Testing Laboratory needed for testing sandwich panels with PPGI sheet and EPS OR GLASSWOOL filled inside. we want to test it... View More
Europe, Asia, Australia, West Coast USA product safety laboratory needed for EC bio-solubility testing of glasswool insulation fibres to EC protocols ... View More
USA A2LA Materials Laboratory needed for ASTM Optical Testing for 9 armor glass windows 12 X 24 X 3 inches that need Optical Deviation (ASTM F 801-96 ... View More
Product safety testing laboratory needed for testing to meet ANSI and CSA standards for safety eyewear.
We have double D occupational PC lens with bi... View More
US Materials Laboratory needed for Mil-Std Testing MIL-C-20079 Military Standard for fiberglass cloth and tape View More
USA Product Safety laboratory to test imported safety glasses to assure conformance to ANSI Z87.1-1989 View More
USA Textiles Laboratory needed for Confocal RAMAN microscopy of fiberglass cloth fabric. Cost for testing two samples by Confocal RAMAN microscopy? Th... View More
Asia FDA GMP Food Analytical Chemistry Labroatory needed for testing food contact plastic parts molded from Glass Reinforced Nylon, and Teflon. View More
Toronto Canada Bio-Analytical/Materials Laboratory required for bio-compatibility testing for SiO2 Nano-crystal generated on Bio-active glass. View More
USA USP Analytical Chemistry Laboratory needed for Glass Delamination. I would like to analyze a set of samples by ICP-OEC, ITC, and DSIMS, and Powder... View More
USA FDA GMP, ISO 6872 Analytical Chemistry Laboratory required for testing. Wash TEN small specimens with water of Grade 3, as described in ISO 3696, ... View More
ISO/IEC 17025 Optical Materials Laboratory required for laminated glass to be tested for optical deviation in accordance with ASTM F801-96. Can ship o... View More
Mexico Analytical Chemistry Laboratory needed for testing Glass fibers solubility in saline solutions.
I need the ppm of Si, Ca and Mg that are solub... View More
USA FDA GLP Micobiology Laboratory needed for Filter sterilization, USP LAL endotoxin testing, and sterile packaging of C-14 labeled carboplatin in so... View More
Europe Materials Laboratory needed for material- XRF examination, Certified reference materials (glass material) for index of refraction -secondary st... View More
USA analytical chemistry laboratory needed for testing Glass filled Phenolic Molding Compound for moisture by using a Ohaus Moisture Balance. View More
Africa Environmental Laboratory needed for water quality testing of glassware View More
Maryland Histology Laboratory needed for Immunofluorecent staining of frozen sections on glass slides View More
Consumer Products Safety Laboratory needed for testing on a Quartz Infrared Heating lamp. The lamps are used as heating elements inside our portable ... View More
India Packaging Laboratory needed for testing Powdered glass & Water attack on glass containers for pharmaceuticals View More
USA electrical laboratory needed for testing electrical resistance for a Component is a cylinder 1.75 inch long By 1.2 inch diameter, Titanium Core wi... View More
Panama Industrial Hygiene Laboratory needed for NIOSH 7400 testing for identificacion and quantity of glass fiber" View More
USA FDA GMP Analytical Chemistry Lab needed for testing drinking glass to ensure it meets US FDA standards / requirements. View More
ASTM D 3574 testing in USA (Newark) lab for Malamine Foam and Fiberglass composite J-Stream Autoclave Aging View More
Analytic chemistry lab in Singapore needed for usp glass container test for hydrolitic resistance based on EP, USP & JP test for arsenic limit View More
Optical Lab needed to determine the UV transmission of various coatings applied to a glass substrate. View More
Materials lab needed for identity testing on glass View More
Materials lab needed for geotechnical evaluation of Rock Specimen (< 30 grams). Need to have established type of surface coating on specimen (silica g... View More
Microbiology lab needed for microbial disinfectant efficacy study testing of microspheric beads used air-fluidized therapy (AFT) beds for patients wit... View More
Analytical Chemsitry Lab needed 2-3 times per month for lithium analysis in rotor samples that are nontoxic, nonflammable and inert. Specifically, th... View More
Metallurgical lab needed for lithium analysis in nontoxic, nonflammable and inert rotor samples. Specifically, they are made mostly of amorphous silic... View More
Analytical Chemistry Laboratory needed for longterm contract testing foam glass compositions: 5 samples, no smaller than
3"x3"x2" and no larger than ... View More
Packaging laboratory needed to see if a package of three glass jars would break if it was dropped. View More
Materials laboratory needed for mechanical testing of 15 different conformal coating products (acrylic, urethane, and synthetic rubber) using DMA (AST... View More
Materials laboratory needed for NFPA flame retardant test on fibre glass materials with fire retardant coating. View More
Analytical Chemistry laboratory needed for ASTM D92 - Cleveland Open Cup Flashpoint test. MUST HAVE GLASS CUP. Sample contains peracetic acid that wil... View More
Physical laboratory needed for testing tempered glass. We will be installing a glass tempering furnace in April, 2008. We would like to make contact w... View More
Physical laboratory needed for security film on glass - glazing product safety test. Please see the link below for details: www.protectiveglazing.org/... View More
Geological laboratory needed for carbon dating a rock/glass slag(unsure if it is a rock or piece of slag). I have a rock that Act Labs did a chemistry... View More
Physical laboratory needed in USA for ANSI testing of new safety glasses lenses to verify they meet the ANSI Z87.1 standards. View More
Materials lab needed for testing ceramic/glass samples for a process that needs further refinement. I will submit sample parameters and the lab must ... View More
Physical laboratory needed for impact test for a wired glass specimen View More
Biomedical lab needed for the following ASTM testing:
1.) ASTM F2101-01 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BF... View More
Physical laboratory needed for testing transparent armor (ballistic glass) for light transmission in the 400-1100 nm range in 10 nm increments. View More
Analytical Chemistry Laboratory needed for transmission electron microscopy TEM analysis of polyethylene. A small piece of the polyethylene sample wi... View More
Analytical Chemistry Laboratory needed for gas testing in compact fluorescent lamps and incandescent lamps, as well as their approximate mass balance.... View More
Materials laboratory needed for ASTM Thermal Testing 1) thermal coefficiente of expansion logical;
2) glassy transition saying;
3) unitary load of d... View More
Materials Laboratory needed for testing UV-blocking characteristics of glass or acrylic sheet View More
Mechanical laboratory neeeded for testing according to standard PSA (Peugeot) Matrices: Braidings tubular,
glass fibre + silicone (see Doc. in enclos... View More
Mircobiology laboratory needed for investigating the effect of our patented "energy oscillations" on bacterial cells. For that reason we would like to... View More
Histology laboratory needed for sectioning of paraffin embedded tissue samples and mounting of sections on glass slides View More
Product Safety Laboratory needed for chemistry and biology testing in an aquarium upon addition of glass instead of gravel in the bottom of an aquariu... View More
Materials laboratory needed for ASTM Testing, Hardness tests:ASTM D2240, 15 sec post impact at 23C Shore A Durometer
Dynamic Properties: standa... View More
Fiberglass manufacturing company needs physical laboratory for ASTM Testing flexural test as ASTM D 638, View More
Physical laboratory needed for ASTM Testing of Polyester protective sleeve to ASTM 5927 LINE CALL OUT TPE 50211. In addition the other customer ask us... View More
Physical laboratory needed for ASMT and SAE thermal testing on aliminium+fiber glass tube. Thermal Conductivity Test according to ASTM C518,C177 and T... View More
Materials laboratory needed for ASTM Testing of double glazing glass View More
Analytical Chemistry Laboratory needed for Differential Scanning Calorimetry DSC ttesting on on liquid sample (could be dried on glass slide) View More
Analytical Chemistry laboratory needed for Packaging Testing (Ph. Eur sections 3.2.1) of Pharmaceutical amber glass (hydrolytic resistance)
View More
GLP Analytical Chemistry laboratory needed for radical testing using ESR/EPR. Samples would be a very thin film on a glass rod. The radicals may be ... View More
ISO materials laboratoryh needed for ASTM Testing of Architecture Glass View More
ISO Physical laboratory needed for EN, ASTM testing of glass for building use (Eg. float glass, patterned glass) according to Kenyan standard KS 1535... View More
Bioanlaytical laboratory needed for
several skin equivalent samples already fixed in 10% formalin to be processed for H&E staining on glass slides an... View More
nY Physical laboratory needed to Assess breakdown of polymer, compatability, contamination etc . Forensics polymer analysis of architectural glass ins... View More
US FDA GMP and EDQM analytical chemistry laboratory needed for methods validation and EUSP and EP testing of Azithromycin APIs according to EP5 and ... View More
FDA GMP, GLP laboratory needed for pharmaceuticals container closure suitability system: leachables and extractables from glass container and elastom... View More
Materials laboratory needed for testing purity of sand samples for the purpuse of manufacting glass products. View More
Europe microbiology laboratory needed for RTCA, AITM, ASTM testing for Fungus Resistance (Pilzbeständigkeit)in aeronatutical parts (honeycomb core san... View More
Petrochemical manufacturer needs materials laboratories for testing fiberglass plastic sheets
View More
GMP ANALYTICAL LABORATORY NEEDED FOR USP III CHEMICAL AND LIGHT TRANSMISSION FOR AMBER GLASS BOTTLES PACKAGING View More
ISO Laboratory needed for testing Pesticide/insecticide ready to use, in liquid (DIFLUBENZURON - class benzoylureas - formulation OF ,60g a.i./l). Tes... View More
laboratory needed to test drinking glassware to make sure it complies with FDA and State of California laws. View More
extractable/leachable analysis on glass vials, rubber stoppers, Lyoguard lyophilization trays View More
Product Safety testing laboratory for testing chilcren's sunglasses for export to the USA.Drop ball testing certificate required to ship glasses to th... View More
We are currently looking for laboratory that can conduct an analysis of 3 different glasses in accordance
with the following standards:
1. ISO 6... View More
ISO Product Safety laboratory needed for an analysis of 3 different glasses in accordance with the following standards: 1. ISO 695 - Glass - Resistanc... View More
Std Aluminum over Copper Vacuum Metallization (PVD) Glass Coupon Characterization. Measure thickness, composition, and purity. 3 Coupons - 2 inch squa... View More
mDSC scan of protein formulations to determine the Tg (glass transition temperature)for use in developing lyophilyzatin cycles. View More
AOAC 978.10 Crude Fiber test in animal feed (soy protein). Fritted glass crucible method View More
Physical laboratory needed for direct and indirect lightning strike tests done to see the durability of our highly condensed steel product when it is ... View More
ISO Ireland or UK analytical chemistry laboratory needed for USP Particulate count analysis on glass vials, as per USP788. View More
Imaging of glass micro structures with dynamic range of 10 to 1000 microns. Tclear glass is 60 mm cube but having small defects then need to imaged an... View More
"Seeking analytical laboratory to accurately quantify percentage of trace elements in diesel particulate matter, fuel, and lubricant samples. Primary ... View More
Testing for lead, mercury, cadmium, hexavalentchromium, polybrominated biphenyls(PBB) or polybrominated diphenyl ethers (PBDE) for part made from poly... View More
DSC (differential Scanning Calorimetry)testing to determine TG (glass transition temperature). View More
Sterilization Analysis of sterile Glass Dropper Assemblies
to determine Sterilizing Levels Required View More
Sheer and tensile strength on a variety of substances. Ex: wood, metal, glass, plastic, etc View More
To coordinate gamma irradiation and provide testing for compression set, break loose force and seal integrity of a rubber plunger in a small glass bar... View More
3 40 mL Type 1 Flint glass vials with a green urea closure with a teflon liner needed to be tested for TOC View More
contract lab which may perform a QC test for my company. The following needs would be for occasional routine QC testing. Testing must be performed acc... View More
Popular Industries
