Incoming Wood, Paper and Pulp Laboratory Test Requests

Contract Laboratory has received the following Wood, Paper and Pulp Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Wood, Paper and Pulp Laboratories to perform their Wood, Paper and Pulp Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Wood, Paper and Pulp laboratory that would like more information on these Wood, Paper and Pulp projects, please visit our registration page or call toll us free 1-855-377-6821.

Below are our 50 most recent Wood, Paper and Pulp laboratory test requests. Please log in to see more.

17-00131

Wood, Paper and Pulp

URGENT. Analytical chemistry laboratory needed for testing of agarbatti for composition.

Closed

16-02460

Wood, Paper and Pulp

Pressure drop & CFM airflow testing on new line of HVAC cold air returns we are manufacturing.

Closed

16-02131

Wood, Paper and Pulp

Physical Laboratory needed exterior grade laminate testing for UV resistance

Closed

16-02017

Wood, Paper and Pulp

Materials laboratory needed for classification testing of recycled in order to determine who can buy it from us.

Closed

16-01968

Wood, Paper and Pulp

Materials Laboratory needed for ASTM Testing of Processed woodcore Panel Board assemblies (using core material such as MDF / Particle Boards, Laminates, Edge Banding etc etc ).We are looking for Test Certification for ?ASTM E84-06a? for surface burning characteristics of the Finished Panel Board assemblies (where we would like for the Test to make specific reference to the actual assembled components for Wood-core Panels including core, Laminates and Edging.

Closed

16-01605

Wood, Paper and Pulp

LONG-TERM TESTING Materials laboratory needed for shear strength testing of an adhesive as per Federal Specification MMM-A-181D.Shear strength by tension loading340 lbs/in2 dry joint test per ASTM D906.

Closed

16-01587

Wood, Paper and Pulp

Asia analytical chemistry laboratory needed for confirmatory testing of phenolic board to determine whether the core is eucalptus and identity of glue used.

Closed

16-01261

Wood, Paper and Pulp

Oak plantation needs environmental laboratory for soil and tissue testing to identify transplant stress, blight or Chlorosis

Closed

16-01225

Wood, Paper and Pulp

NABL approved materials laboratory needed for wooden material testing

Closed

16-01198

Wood, Paper and Pulp

Analytical Chemistry Laboratory needed for resin analysis for ion exchanger.

Closed

16-00561

Wood, Paper and Pulp

Toxicology Laboratory needed for toxicity testing of a lumber treatment

Closed

16-00087

Wood, Paper and Pulp

China physical laboratory needed for abrasive paper testing. Please provide cost of testing

Closed

14-01366

Wood, Paper and Pulp

US analytical chemistry laboratory needed for chemical composition confirmation analysis performed on the following chemicals:

1. Potassium sorbate by FTIR
2. Calfoam ES 302 or (Sodium lauryl sulfate 30%, 2 mole ethylene glycol) by QTFLCMS Quadrupole Time of Flight Liquid Chromatography Mass Spectroscopy
3. glycerine by NMR
4. phenoxyethanol by NMR
5. Pantaren or 2000N UP (decyl glucoside) by NMR
6. Sharomix 706 Plus (Dehydroacetic Acid and Benzoic Acid in Benzyl by Alcohol and Water with 0.2% d-?-tocopherol) by QTFLCMS GCMS
7. Ritabate 20 (polysorbate 20) by NMR
8. TBF 190 (EDTA) by QTFLCMS Quadrupole Time of Flight Liquid Chromatography Mass Spectroscopy

USA analytical chemistry laboratory needed for chemical composition confirmation testing. The methods are not final, your lab may suggest individual analytical strategies for analyzing each chemical individually. The goal of this analysis is to verify the chemical composition of the listed chemicals.





Closed

14-01056

Wood, Paper and Pulp

Large Manufacturer needs Norway Packaging Laboratory needed for UN testing to issue AI/AQ Lab Number for Haz Mat Packaging

Closed

14-00995

Wood, Paper and Pulp

USA FDA cGMP food packaging laboratory needed to provide Request for Quote for for FDA extractables testing according to 21 CFR 176.170 for food grade papers? They will mostly be sandwich wrap paper.

Closed

14-00885

Wood, Paper and Pulp

India analytical chemistry laboratory needed for chemical testing for paper ink or color removing chemical .

Closed

14-00619

Wood, Paper and Pulp

Paper mill needs environmental analytical chemistry laboratory for water testing: GC/MS testing as our GC/MS is down, and we need a complete characterization of 3-5 water samples in order to know what direction to go with our treatment options. We would like the tests to run to the 1ppm level.

Closed

14-00206

Wood, Paper and Pulp

Analytical Chemistry Laboratory needed to characterize pulp mill noncondensible gases for H2S,MeSH, DMS, DMDS, MeOH, and pinenes. Also need to purchase or rent sampling apparatus and containers and we will need help with the chain of custody paperwork as well. The pulp mill is located in Chile. We would do the sampling and send the samples to your lab. We assume that VPC would be used for analysis.

Closed

13-01590

Wood, Paper and Pulp

USA EPA Environmental Toxicology Laboratory needed for EPA Toxicity Testing: Chronic Whole Effluent Toxicity Monitoring Requirements: The Water Quality Standards of Mississippi require that all waters be free from substances in concentrations or combinations which are harmful to human, animals, or aquatic life (State of Mississippi, Water Quality Criteria for intrastate and Coastal Waters, Section II.4., Minimum Conditions Applicable to All Waters, page 3, adopted March 22, 1990). In accordance with such requirements, the permittee is authorized to discharge from outfall 001 only in accordance with the following conditions: (1) The permittee shall submit any existing toxicity data for review by the Mississippi Office of Pollution Control within 30 days of the effective date of this permit. (2) The permittee shall perform 7-day chronic, static renewal, definitive (a control and five effluent concentrations) WET tests in accordance with Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Water to Freshwater Organisms, (EPA/600/4-89/001) or Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms, (EPA/600/4-87/028) or the most recent edition*. [WPC-1 Chapter Two Section VI] (i) Dilution water used for these tests shall consist of reagent grade water, defined as distilled or deionized water that does not contain substances which are toxic to the test organisms. For freshwater tests, dilution water shall consist of reagent grade chemicals or mineral water combined to make moderately hard dilution water according to Short-Term Methods for Estimating the chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms (EPA/600/4-89/001) or most recent edition*. For estuarine testing, dilution water shall consist of synthetic seawater or hypersaline brine combined to achieve a salinity of 20 parts per thousand according to Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms (EPA/600/4-87/028) or most recent edition*. These dilution waters will be deemed acceptable if the control organisms in the toxicity tests meet the minimum EPA criteria for chronic tests. n accordance with such requirements, the permittee is authorized to discharge from outfall 001 only in accordance with the following conditions: (1) The permittee shall submit any existing toxicity data for review by the Mississippi Office of Pollution Control within 30 days of the effective date of this permit. (2) The permittee shall perform 7-day chronic, static renewal, definitive (a control and five effluent concentrations) WET tests in accordance with Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Water to Freshwater Organisms, (EPA/600/4-89/001) or Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms, (EPA/600/4-87/028) or the most recent edition*. [WPC-1 Chapter Two Section VI] (i) Dilution water used for these tests shall consist of reagent grade water, defined as distilled or deionized water that does not contain substances which are toxic to the test organisms. For freshwater tests, dilution water shall consist of reagent grade chemicals or mineral water combined to make moderately hard dilution water according to Short-Term Methods for Estimating the chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms (EPA/600/4-89/001) or most recent edition*. For estuarine testing, dilution water shall consist of synthetic seawater or hypersaline brine combined to achieve a salinity of 20 parts per thousand according to Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms (EPA/600/4-87/028) or most recent edition*.

Closed

13-01490

Wood, Paper and Pulp

Electrical Laboratory needed for IS Testing and IEC Testing of Electrical Grade Insulating kraft Paper

Closed

13-01486

Wood, Paper and Pulp

Analytical Chemistry Laboratory needed for paper fiber testing: fibre, silica, methanol content and viscosity in weak black liquor.

Closed

13-00854

Wood, Paper and Pulp

South East USA Materials Laboratory needed for waste fuel Testing for chlorides,mercury,and
TSM as it applies to boiler mact.
Also need percent moisture,BTU,and percent ash.

Closed

13-00749

Wood, Paper and Pulp

India analytical chemistry laboratory needed for assay of polyaluminium chloride for chloride and Aluminium oxide

Closed

12-2020

Wood, Paper and Pulp

Texas analytical chemistry laboratory needed for hplc testing on wood chips

Closed

12-1135

Wood, Paper and Pulp

India Materials Laboratory needed for cardboard Testing: Spot color test, Rub test, Registration test and whiteness test

Closed

12-0569

Wood, Paper and Pulp

India Materials Laboratory needed for MDF board testing of MDF new material

Closed

11-2656

Wood, Paper and Pulp

Eastern USA NPDES Environmental Toxicology Laboratory needed for Quarterly acute and chronic cerio daphnia. Quarterly acute and chronic fathead minnow. Effluent is from a paper mill.

Closed

11-02341

Wood, Paper and Pulp

Environmental consulting firm needs materials laboratory for fingerprinting of wood for installation of several wood beams installed in an area of his building. He ask us for a "Fingerprint with aging for wood sample to determine time of installation" in the submitted scope of work. In our research we found an IR spectroscopy analysis used use for measuring the age of wood. How can you help us? Thanks.

Closed

11-02153

Wood, Paper and Pulp

Pacific Rim, Asia Microbiology Laboratory needed for testing with Microbiological Organisms -- requested test method (YC171-2009 or GB4789.2-2010)

Closed

11-01843

Wood, Paper and Pulp

Engineering Firm needs electrical laboratory for ASTM, Dielectrical Testing:Dielectric strength (ASTM D-149) (IEC 243-1 Electrical insulation purpose. Evaluation of paper samples
- Between 50 and 70 microns thick
- Between 40 and 60 gsm

Closed

11-01823

Wood, Paper and Pulp

Australia Environmental Laboratory is needed for Permethrin testing is required on sawdust with a LOR <1ppm. Around 5 differnt samples.

Closed

11-01805

Wood, Paper and Pulp

India environmental laboratory needed for sub wastewater testing and effluent water testing

Closed

11-01721

Wood, Paper and Pulp

Materials Laboratory needed for cardboard testing: Characteristics from cardboard The long from the fiber The distribution Tabber stiffnes If you have more tests for the cardboard let me know.

Closed

10-00000

Wood, Paper and Pulp

Praesent feugiat non quam id faucibus. Etiam leo libero, tincidunt sit amet ex a, pretium posuere nunc. Nam massa tellus, auctor eget sem vitae, tempus cursus mauris. Duis sed nibh ut metus volutpat sagittis commodo in ex. Nullam lacinia massa at ipsum sollicitudin dignissim. Suspendisse potenti. Praesent malesuada risus in erat ultricies facilisis. Donec pharetra aliquet purus et lacinia. In at felis fringilla velit laoreet laoreet quis sed nisi.

Closed

09-2495

Wood, Paper and Pulp

Texas analytical chemistry laboratory needed for tesitng wood presence of Termidor SC

Closed

09-2438

Wood, Paper and Pulp

Europe analytical chemistry laboratory needed for Flammability Testing of honeycomb, wood veneer and kraft kote polymer resin. we wish to do the flammibilty test to meet FAR25.853 requirements.

Closed

09-2402

Wood, Paper and Pulp

ONTARIO ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR PRESERVATIVE TESTING OF PRESERVATIVE TREATED WINDOWS

Closed

09-2336

Wood, Paper and Pulp

ISO Materials Laboratory needed for testing paper and board materials as per certain ISO standards. Please let us know, if this is possible and address to send the samples, contact person name and rate for testing. We'll send you the list of tests and samples once we agree.

Closed

Submit Wood, Paper and Pulp Testing Requests for Wood, Paper and Pulp testing and Wood, Paper and Pulp Scientific Research