Top

Incoming Water, Sewer and Pipeline Laboratory Test Requests

Contract Laboratory has received the following Water, Sewer and Pipeline Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Water, Sewer and Pipeline Laboratories to perform their Water, Sewer and Pipeline Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Water, Sewer and Pipeline laboratory that would like more information on these Water, Sewer and Pipeline projects, please visit our registration page or call toll us free 1-855-377-6821.

Below are our 50 most recent Water, Sewer and Pipeline laboratory test requests. Please log in to see more.

17-00855

Water, Sewer and Pipeline

Materials laboratory needed for confirmatory testing of jointing materials for sewer drains to DIN 4062, Cold processable plastic jointing materials for sewerdrains - Jointing materials for prefabricated parts of concrete, requirements, testing and processing

Closed

17-00362

Water, Sewer and Pipeline

Water agency needs Metallurgical Laboratory needed for corrosion testing including pitting depth from corrosion on 1 Type K Soft copper tubing.

Closed

17-00107

Water, Sewer and Pipeline

URGENT Environmental laboratory laboratory needed to perform microbiological induced corrosion (MIC) analysis on water.

Closed

17-00081

Water, Sewer and Pipeline

Research laboratory needed for optimization study on ozonators used for water treatment to define the optimal ozone amount for treatment of customer's water including chemical analysis of water to calculate how much ozone we need to decrease quantity of needless organic and inorganic compounds to acceptable level.

Closed

16-02410

Water, Sewer and Pipeline

Plumbing product developer in North America needs a closet flange (toilet flange) tested for CSA181.1 or ASTM d2661 or the UL corresponding certification.

Closed

16-02390

Water, Sewer and Pipeline

Laboratory needed for Transmittance Test for UTMB Hospital waste water UV light used for sterilization

Closed

16-02200

Water, Sewer and Pipeline

Environmental Products Company needs Analytical Chemistry Laboratory for Analysis of Xanthates from surface water

Closed

16-02119

Water, Sewer and Pipeline

Environmental laboratory needed for surface water testing of 4 acre lake displaying a very small diesel oil pollution bloom from run off surface water in the vicinity. Need lake water tested before stocking it with expensive carp.

Closed

16-02090

Water, Sewer and Pipeline

Physical Laboratory needed for FDA Testing of new portable water filtration device with ceramic filter ,ion exchange resin , carbon fiber , nano cluster media

Closed

16-02084

Water, Sewer and Pipeline

Environmental Laboratory needed to perform several analyses on well water samples. There are 64 samples and each one will need to be analyzed for:1) Isotope analysis of: Sr, O, H, S and C2) Dissolved Gasses: O2 and H2S3) Heavy metals (in concentrations of microgram per liter-ppb): Fe, Zn, V, Al, B, Li, Ag, Mo, Rb, Se, As, Sn, U, Tl, Sr, Sb4) Silica (SiO2)Is your lab able to perform such tests? If so, I would appreciate a price quote.Please also answer a few questions:1) What sample method does your lab use for each of these analyses? Is your lab certified for these methods? 2) Sampling will be done in Israel and would therefore we need to transport the samples to you. Do you have a delivery service with which you already work and would be able to help us with this? Of course such delivery would need to include storing the samples in conditions needed prior analysis. What conditions would those be?3) From the time they are sampled, how fast do the samples need to get to the lab?4) How could we be able to obtain your labs required sampling vessels (bottles, vials)? Will there be any additives for the samples (acid) or filters needed?5) How fast is the turn around, meaning how long after the samples are received could we expect to get the results?Thank you in advance.

Closed

16-02034

Water, Sewer and Pipeline

Electrical laboratory needed for protoype testing: potable water testing of energy consumption and water delta, flow rates and energy of volts, amps and wattage temperatures on a 2 stage prototype of 1 gallon and 4 gallons = 5 gallons total

Closed

16-01711

Water, Sewer and Pipeline

Analytical chemistry laboratory needed for Glassware Inhibitory residue test -on powdered hand wash laboratory glassware detergent. test needs to be performed according to the procedure described in ?Standard Methods for the Examination of Water and Wastewater, 18th Ed, Sec. 9020 ---- Glassware inhibitory residue test.?.

Closed

16-01615

Water, Sewer and Pipeline

Europe laboratory needed for wastewater testing: five analyses requested:
1. BOD
2. TSS
3. Fecal Coliform
4. pH
5. Total chlorine

Closed

16-01609

Water, Sewer and Pipeline

LONG-TERM TESTING: ISO 17025 Environmental Microbiology Laboratory needed for Testing, Water Quality Testing, Water Portability testing, 740 samples.

Closed

16-01591

Water, Sewer and Pipeline

Environmental analytical chemistry laboratory needed for water analysis for Dissolved Zirconium analysis of water samples. 20 samples field filtered to 0.45 microns

Closed

16-01499

Water, Sewer and Pipeline

EnvironmentalLaboratory needed for OECD Testing of Sewage Treatment Water to OECD 303 for zinc phytate
Simulation Test - Aerobic Sewage Treatment -- A: Activated Sludge Units; B: Biofilms
(TSG requirement)
This Test Guideline describes two simulations tests used in the aerobic sewage treatment.
Simulation test (aerobic sewage treatment) - activated sludge units, ISO Standard 11733, OECD 303 A, EC C.10

Closed

16-01493

Water, Sewer and Pipeline

LONG-TERM TESTING Ontario Accredited Environmental Laboratory needed for groundwater testing : ethane analysis

Closed

16-01444

Water, Sewer and Pipeline

Environmental analytical chemistry laboratory needed for surface water testing for antibiotics in surface water for samples from India. Please provide holding time and cost.

Closed

16-01442

Water, Sewer and Pipeline

Microbiology laboratory needed for microbiological testing of production facility including water testing and air testing of various areas around production lineincluding plastic closures, preforms and conveyors.. Microbiology testing to include mold/yeast, total bacterial, and coliform separately. Tap water in the production area will also be tested in the production area.

How do you go about and do these test. Does one of your technicans come on site or do I provide the samples?

Closed

16-01354

Water, Sewer and Pipeline

University researcher in Plant Protection needs agriculture laboratory for water testing of water samples used for agricultural irrigation. Please provide quotation for the respective analyzesand duration of the analysis as well as the procedures for submission of samples. Please, let me also know the following: 1. How can I send the samples from Mozambique to your laboratory, ; 2. How is that samples must be preserved; And other relevant procedures. Thank you very much. I would appreciate your support.

Closed

16-01244

Water, Sewer and Pipeline

Europe company needs microbiology laboratory for EN norm Efficacy testing of algaecide for application to water systems, such as swimming pools & spas

Closed

16-01116

Water, Sewer and Pipeline

Food analytical chemistry laboratory needed to test acetaldehyde (AA) on plastic (PET) preforms & bottled drinking water..

Closed

16-01038

Water, Sewer and Pipeline

Environmental Analytical chemistry laboratory needed for wastewater testing for Adsorbable Organic Halogens, AOX in waste wáter,

Closed

16-00942

Water, Sewer and Pipeline

LONG-TERM TESTING Fracking company needs analytical chemistry testing for Sodium chloride testing for purity and contaminants

Closed

16-00893

Water, Sewer and Pipeline

EPA Environmental laboratory needed for bench-scale testing of a client?s wastewater treatment procedure. Client runs a metals finishing operation where they apply a chromate conversion coating to aluminum. Their wastewater is high in hexavalent chromium which they are able to remove by reducing it to Cr(III) and precipitating it as a hydroxide. Their current procedure seems to work well for this purpose. Recently they have been having some issues with high total cyanide results in their treated effluent, I suspect that the cyanide is coming from their chromating solution which contains potassium ferricyanide as an accelerant. Based on what I have read, the ferri- and ferrocyanide complexes can be difficult to treat since they are very soluble and are not amenable to chlorination. I did find some promising literature that suggests these complexes could be removed using activated carbon, and I am wondering if carbon could be incorporated into their existing treatment procedure somehow.

I am looking for someone to replicate their treatment procedure using samples of their waste, with and without the addition of carbon in order to see if this strategy will work. Their treatment procedure is relatively simple, and we would provide the carbon sample for testing.

Closed

16-00872

Water, Sewer and Pipeline

Large company needs laboratory for water testing for purity

Closed

16-00812

Water, Sewer and Pipeline

Media company needed for nuclear particle analysis for ocean water from a Santa Monica beach.

Closed

16-00776

Water, Sewer and Pipeline

Environmental laboratory needed for USEPA potable and non-potable water testing to USEPA method 522 for potable and non-potable water. 1-4 dioxane

Closed

16-00736

Water, Sewer and Pipeline

Analytical chemistry laboratory needed for phthalates testing in bottled drinking water at different temperatures

Closed

16-00717

Water, Sewer and Pipeline

North Carolina Certified Laboratory for wastewater testing for the analysis of Decahydronaphthalene Analysis under methodology, EPA 624, or other applicable method.

Closed

16-00683

Water, Sewer and Pipeline

Africa Agriculture Bioanalytical Laboratory needed for Proteomics analysis on tomato leaf and fruit subjected to two water treatments.

Closed

16-00476

Water, Sewer and Pipeline

India environmental laboratory needed for sludge testing of sludge generated after treatment of Industrial wastewater (containing toxic metals etc) & also ground water samples for the parameters approved by CPCB.

Closed

16-00240

Water, Sewer and Pipeline

Company needs Environmental Laboratory for particle analysis for the minimum size of particles that are retained when water poured though a sheet of test filter

Closed

Submit Water, Sewer and Pipeline Testing Requests for Water, Sewer and Pipeline testing and Water, Sewer and Pipeline Scientific Research