Top

Welcome!

ABOUT US

FIND LABORATORIES

LABORATORY REGISTRATION

SUPPORT

Email

Need Toys and Childrens Products Testing or Scientific Research?

Find Laboratories for all your Toys and Childrens Products Testing or Scientific Research!

Submit Toys and Childrens Products Laboratory Test Request

Toys and Childrens Products Laboratory Test Requests

Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Toys and Childrens Products Laboratories to perform their Toys and Childrens Products Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Toys and Childrens Products laboratory that would like more information on these Toys and Childrens Products projects, please visit Register Laboratories or call toll free 1-855-377-6821.

11-01354

China Toy Laboratory needed for CPSIA / ASTM testing of plush toys.

Closed

11-01300

USA or Asia Toxicology Laboratory needed for Toxicological Risk Assessment of liquids, putties, pastes, gels, and powders that are found in common consumer products. This will be an on demand service based on our customer requests.

Closed

11-01133

Consumer Products Safety Laboratory needed for safety testing (Choking hazard)of a handmade wooden toy (no paint).

Closed

11-00968

Asia AANZ BS EN 747 Consumer Products Safety Laboratory needed to test sample bunk bed for safety and issue compliance certificate

Closed

11-00967

USA Consumer Products Safety Laboratory needed for consumer products safety testing of toys to bring to market.

Closed

11-00884

USA CPSIA, ASMT and EN-71 Consumer Product Safety Testing of 10 inch plush toys for Lead, Cadmium, Chromium, Barium, Antimony, Arsenic, Mercury, Selenium and other toxic chemicals.

Closed

11-00855

USA Consumer Products Safety Laboratory needed for C02 / Oxygen level testing in our Human Spheres. Determine preliminarily whether a defect is present in product. Whether defect rises to the level of substantial risk of injury to children under section 15(c) of the FHSA, 15 CA 110051.

Closed

11-00748

USA Consumer Products Safety Laboratory needed for C02 / Oxygen level testing in our Human Spheres. Determine preliminarily whether a defect is present in product. Whether defect rises to the level of substantial risk of injury to children under section 15(c) of the FHSA, 15 CA 110051.

Closed

10-01692

Michigan Consumer Products Safety Laboratory needed for testing a stuffed animal.

Closed

10-01667

Eastern USA Consumer Products Safety Laboratory needed to test baby shampoo, conditioner, lotion, diaper cream and bubble bath.

Closed

10-01586

USA Consumer Products Safety Laboratory needed for product safety testing in accordance to ASTM - (2) samples.

Closed

10-01510

Australia/New Zealand Consumer Products Safety Laboratory needed for evaluation of Children's sleepwear items in accordance to AS/NZS 1249:2003. Need to determine which category (1 - 4) they would be tested to.

Closed

10-01444

Southern California Consumer Product Safety Laboratory needed for toy evaluation of corrugated plastic play houses + stickers so we know which tests need to be done.

Closed

10-01410

WestCoast USA CPSC Laboratory needed for toy testing.

Closed

10-01189

India Product Safety Laboratory required for testing and providing lab certificate required for customs clearance on plush toys to be imported to India from China. Please provide price details.

Closed

10-01150

Western USA consumer product safety laboratory needed for toy testing of toy blocks to place on the market to sell

Closed

10-00901

USA Certification Laboratory needed for certification testing of product imported from China that has already been certified for Canada. It is a 100% plush product with audio mechanism for ages 3-10 yrs. old.

Closed

10-00481

Consumer Product Safety Laboratory needed for ASTM Toy Safety Testing ASTM F963 of Musical toy incorporating stretch cord,some elastic straps, metal rods.

Closed

10-00288

Toy Consumer Products Safety Laboratory needed for testing eco-toys for American Standards Accreditation.

Closed

10-00103

Toy COnsumer Products Safety Laboratory needed to test plush prototypes for safety

Closed

09-2499

Consumer Products Toy Laboratory needed for testing plastic toy for children ages 2-10

Closed

09-2108

USA, KOREA, CHINA ACLASS CONSUMER PRODUCT SAFETY LABORATORY NEEDED FOR DOLLS TESTING COMPLYING WITH U.S. CONSUMER PROTECTION SAFETY COMMISSION REQUIREMENTS.

Closed

09-1629

California Product Safety Laboratory required for the following testing: astm f963 physical test flammability f96 total lead and soluable heavy metal f963 lead in substrate cpsia phathaltes cpsia

Closed

09-1511

Toy company needs California Consumer Product Safety Laboratory for product safety testing of children's stuffed toys.

Closed

09-1473

USA (New York) ASTM F963-08 Product Safety Laboratory required for testing toys for sharp points

Closed

09-1409

Materials Laboratory needed for testing school resource for children with communication difficulties and there are many aspects to the product as I will need the whole pack testing. Please give me some idea on prices and lead times.

Closed

09-1403

Product Safety Testing Laboratory needed for toy testing for certificate of conformity to import of toys based in India .

Closed

09-1224

China ASTM F963 Product Safety Testing Laboratory needed for testing plush toys.

Closed

09-1215

Eastern USA TSCP & CPSIA Materials Laboratory needed for Product Safety Testing for toxicology, chemistry on Stuffed Plush Toy, Storybook, Backpack for plush toy.

Closed

09-1127

Midwest USA Product Safety Laboratory needed for Flammability Testing of plush toy materials

Closed

09-0843

USA Consumer Products Safety Laboratory needed for Testing plush toy for safety and age appropriateness, material make-up

Closed

09-0728

California Consumer Product Safety Laboratory needed inkjet paper balloon media and plastic pieces to be in compliance with CPSIA and anything that relates to toy safety.

Closed

09-0625

Children's toy manufacturer needs north american FDA, GMP, ASTM and ISO Product Safety Laboratory for deformulation of food items, and other products including arts and crafts, remote controlled planes, / Testing include deformulation,toxicology,microbiology,environmental

Closed

09-0526

US Toy Manufacturer needs Toy Laboratory for ASTM Testing of various Boardgames to astm f963, 16 cfr 1500, 16 cfr 1303.

Closed

09-0489

New Toy Manufacturer needs Washington DC Consumer Products Laboratory for product safety Stuffed-plush stuffed toy with clothes. Need all tests to comply with current regulations for stuffed animals.

Closed

09-0267

Colorado USA ASTM Toy Manufacturer requires USA Materials Laboratory for ASTM Testing to obtain Certificate of Compliance for the toy.

Closed

09-0247

USA Materials Laboratory required for Product Safety Testing on art & craft toys.

Closed

09-0218

Europe CE EN 71 Materials Laboratory needed for product safety testing EN 71 Parts 3, 7.

Closed

09-0178

California CPSC Materials Laboratory required for product safety testing for toy manufacturer; need to test product for lead content.

Closed

09-0162

USA - Colorado CPSC HR4040 Materials Laboratory needed for product safety testing; phthalates in plastic toys.

Closed

09-0046

USA FDA Materials Laboratory needed for product safety to test lead paint in small toy.

Closed

08-2149

USA Electronics, Consumer Products Safety Laboratory needed for testing safety of new childrens plastic toybox which contains electrical components.

Closed

08-2130

Canada Toys Laboratory needed for ASTM product safety mechanical testing for conformity to the canadian toy safety

Closed

08-2079

US Consumer Products Laboratory needed for Toy safety testing for safety standards for lead, cholking & flamability. Product is a trolley, able to covert into backpack as well. With an attached plush animal.

Closed

08-2057

Midwest USA Consumer Products Laboratory needed for Toy Testing for compliance to ASTMF 963 and 16 CFR 1303

Closed

08-1930

US Consumer Product Safety Toxicology Laboratory needed for safety testing of new materials in Dog toys to make sure that they are safe for the dog.

Closed

08-1611

USA Consumer Product Safety Laboratory needed for ASTM F63 testing of plush children's toy bears

Closed

08-1587

New Zealand or China Toy laboratory needed for CE Marking testing for soft toy in a plastic ball that need CE certification for european market

Closed

08-1460

USA Toy laboratory needed for testing wooden toys

Closed

08-1189

Toy Product Safety Laboratory needed to test toys using an XRF for lead and all metals and plastics. Will ship toys to lab, they will test and send report and ship back.

Closed

08-1112

USA Consumer Product Safety Lab needed for Strangulation/Suffocation Testing of Stuffed plush cat with long tail which could possible strangle or suffocate if a child's head get stucks under it

Closed

08-1066

USA Laboratory needed for product safety testing of colored pigment sand for child product safety (ingestion hazards and allergic).

Closed

08-0959

ASTM Safety Testing midwest USA lab needed to test infant table for safety and no sharp edges. We also need it tested to make sure that it is a non toxic toy.

Closed

08-0784

Egypt product safety lab with GMP & ISO certifications needed for complete toy safety testing, inclu. toxicology and product safety.

Closed

08-0737

USA (pref. New England) ASTM certified product safety lab needed for safety testing of infant toys: lead/toxic chemical content, strength, etc.

Closed

08-0540

Product Safety Lab needed for ASTM and CPSA testing of plush dolls for product safety within the scope of the standards set by the CPSA, CSPA and the ASTM F963

Closed

08-0530

Toy Product safety laoratory needed for product safety testing of toy (for ages 3 yrs to 5 yrs) materials are fabric, foam, plastic hook, ink, tear resitance film)tests known at this point are: 1. test for banned substances 2. test for restricted substances 3. flame retardant 4. drop test 5. no sharp points or edges 6. toxic and irritant substances 7. bite test 8. other tests that may be necessary for this product category "activity kit" ...

Closed

08-0453

Consumer Safety Laboratory needed for European Standard EN-71 Testing - Lead Flammability, PVC Testing, Small objects, Torque/Tension Test

Closed

08-0407

Product Safety laboratory needed for Plush Toy Testing as per EN-71

Closed

08-0305

TOy lab needed for ASTM toy product satefy testing: lead paint toy safety

Closed

08-0283

Product Safety Laboratory needed to test simple printed plastic card for toy ages 6+ to global industry standards.

Closed

08-0140

Analytical Chemistry laboratory needed to certify that our soft doll has been tested by an independent lab for lead (both surface coated and embedded) as well as phthalates (a plastic softener that has already been banned in California and Europe.) We are requiring that the toys be both lead free and phthalates free.

Closed

08-0114

Product Safety laboratory needed to test Harness - Plush toy pull test for fabric, buckles and structures.

Closed

08-0069

Toy Product Safety laboratory needed for testing toy doll for phthalates and lead (both surface coated and embedded).

Closed

07-2398

Toy importer looking for laboratory in Canada for ASTM testing of toys on a regular basis for general compliance under Canadian safety standards.

Closed

07-1796

Toy manufacturer needs ASTM product safety testing of giant contruction toy product. Recertification needed for ASTM standards as well as European Union CE standards.

Closed

07-1780

Product Safety Laboratory needed for ASTM CPSC safety testing on wooden toys imported from Eastern Europe and get certification proving that they meet the CPSC safety standards

Closed

07-1764

Product Safety Laboratory needed for testing multiple toys for general product safety including lead-paint testing.

Closed

07-1730

Media organization needs product safety laboratory for testing a few different toys using the same methods employed by Health Canada under the Hazardous Products Act testing.

Closed

07-1543

Product Safety laboratory needed for CE testing to EN-71,1,2,3

Closed

07-1047

Child Product Safety Laboratory needed for CE Product Safety Testing for Aluminum Die Cast riding toy. This ride on pedal tractor toy is made from aluminum Die Casting. It features 4 Rubber tires, chain driven with 2 sprockets, (similar to bicycle) and is steerable. Finish is powder coat painted. We have had our tractor riding cycles tested in the past and have passed for ages 3 and up. We will supply metal specs and paint specs. All pinch p ...

Closed

07-0982

Product Safety Laboratory needed for product safety testing of coloring kit-includes colors, brushes, and erasing pads, the erasing pads are the one at question: a plastic package contains 32 cotton erasing pads, soaked in a chemichal liquid

Closed

07-0884

Product Safety Laboratory needed for EN-71 Toy Safety & Organic Chemical Compounds Testing for a 1" wide polypropylene webbing (tape)that will be used on toys.

Closed

07-0763

Consumer Product Safety Laboratory needed for testing stuffed toys to US product safety requirements

Closed

07-0680

Analytical Chemistry Laboratory needed to complete prototype of children's modeling clay to ASTM Standards.

Closed

07-0542

Product Safety Laboratory needed for EN and ASTM Product Safety testing including for finished Wooden Toys and small Wooden Arts & Crafts item, approx. 12" length, approx. 10 unique items, for ages 4 and up. Analytical Chemistry, mechanical, physical testing includes: ASTM F963-03 Heavy Metals / ASTM F963-03 Mechanical Hazazards /ASTM F 963-03 Flammability EN71 Pt.1 Mechanical Hazards (1-7)EN71 Pt.2 Flammability EN71 Pt.3 Heavy metals

Closed

07-0489

Product Safety Metallurgical Laboratory needed for children games ASTM testing for total lead contact and heavy metal, conform to ASTM F963-03 and 16 CFR 1303

Closed

07-0285

PRODUT SAFETY LABORATORY NEEDED FOR ASTM TESTING (ASTM F963) A TOY LINE MADE OF WOOL FELT STUFF WITH POLYESTER.

Closed

07-0185

Product Safety laboratory needed for toy testing soft doll and related doll clothing for flamability, small parts etc.

Closed

07-0181

USA Product Safety Toy Laboratory needed for ASTM child safety testing of planks (maple wood blocks) for small parts, sharp points and edges, durability, age grading, labeling requirements, etc.

Closed

06-1968

Product Safety laboratory needed for EN 71 safety of toys, part 3 migration of certain elements EN 71 3 1994 materials is a powder coating, paint to be used on a play system. the test HCL to test coating metals amount.

Closed

06-1737

Product Safety laboratory needed for ASTM testing (ASTM F963) for wool felt poly-filled toys.

Closed

06-1473

CPSC product safety testing for testing Metal in children jewlery toys and make-up for kids that we sell in capsules.

Closed

06-1438

ASTM Product safety laboratory needed for projection release test on a rubber band shooter.

Closed

06-1377

Product Safety Laboratory neded for ASTM testing and CPSC testing of stuffed toys. The todays are made of 100% wool felt with polyester fill and are 15"

Closed

06-0803

Toy company needs product safety laboratory for testing it's developed toys manufacturer in China prior to import in China. Toy company develops play environments.

Closed

05-0890

toys manufacturer needs laboratory to perform product safety testing that meets a TIA Request

Closed

05-0855

EN & ASTM Product Safety testing for Puppet Toys with vinyl painted head, fabric and fur body for ages 5 and up. Analytical Chemistry, mechanical, physical testing includes: 16 CFR 1303 Lead content, ASTM F963-03 Heavy Metals 16 CFR 1500 / ASTM F963-03 Mechanical Hazazards 16 CFR 1500.44/ASTM F 963-03 Flammability EN71 Pt.1 1998 Mechanical Hazards (1-7)EN71 Pt.2 Flammability EN71 Pt.3 Heavy metals

Closed

05-0672

EU REACH directive required testings for toys, ceramics, furnitures, textiles

Closed

Submit Toys and Childrens Products Testing Requests for Toys and Childrens Products testing and Toys and Childrens Products Scientific Research