Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Toys and Children's Products Laboratories to perform their Toys and Children's Products Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Toys and Children's Products laboratory that would like more information on these Toys and Children's Products projects, please visit Register Laboratories or call toll free 1-855-377-6821.
India Product Safety Laboratory needed for RFQ on European Commission Directive Testing required for Pencil Sharpner as per EN 71-1:2014. Safety of toys - Part 1: Mechanical and physical properties.
Children's Arts and Crafts company needs India Toxicology Laboratory for Toxicology Testing: LD50 testing on modeling clay for children
Toy Laboratory needed for toy certificaiton testing of 100k plush electronic toys known for our global market access.
USA CPSC Accredited Consumer Products Safety Laboratory needed for Toy Testing: children's plush toy tested for safety and compliance.
Consumer Produsts Safety Laboratory needed for ASTM children's book safety testing: Phthalates Testing- ASTMF963 and 16 CFR 1303. complies with law on phthalates. surface coating for lead will not exceed 100ppm and substates will not exceed 200ppm
USA Toy laboratory needed for puzzle testing to test a 10pc Puzzle. 8 shapes, top, and bottom.
USA Product Safety Toxicology Laboratory needed for Toy Testing: toxicological assessment (TRA) for Plastic toy to be sold in USA. the plastic is "well known" in the professional literature as non-toxic and safety.
China toxicology laboratory needed for ocular safety study testing of biological based toy made from naturally ocurring marine luminous fluids. Acute testing and daily over 3 days
East Coast USA Product Safety Laboratory needed for toy safety testing services of a plush toy using unconventional stuffing. This stuffing, visco elastic memory foam, is commonly found in memory foam mattresses. We want to confirm that this product can be safely used in toys. We only want to test the safety of the stuffing, not the entire toy. Please send me an email about about the services and the prices your firm offers. Email is the preferred method of communication. Thanks!
USA electronics laboratory needed for battery testing of remote controlled helicopters
Consumer Products Laboratory needed for CSPC toy testing: plush toy product tested for CSPC and CA65. What type of tests will be required? Also, what would the price be for the tests? The toy is manufactured in China and will be imported. Thank you for any help you can give me.
Toy distributor needs consumer products safety laboratory for toy product safety testing including phthalate testing there have been many reports of high levels of phthalates and other dangerous substances of competitor product which we suspect are not suitable for children use. those products dont have any safety mark or any other EU certificate.
CANADA consumer products laboratory needed for consumer products safety testing Testing baby bibs, need a report for flamabilty testing as per health canada
Canada Toy importer needs USA toy laboratory for toy testing of toys imported from Africa.
Japan Toxicology Laboratory needed for Toxicology Testing: toxicological risk assessments (TRA)on chemical substances of toys or components of toys
Certified Toy Laboratory, Consumer Safety Laboratory needed toy testing center that is certified to test baby toys
HOKLAS accredited laboratory needed for ASTM Testing to ASTM F2613-13,Standard Consumer Safety Specification for Children's Chairs and Stools . Please reply urgently.
Asia or USA Toy consumer products laboratory needed for toy teating: Physical & mechnical test,Flammability test (ISO8124 's test method) and Toxic element-general and toluene testing per Chile 's requirement.
Los Angeles consumer products toy laboratory needed for toy safety testing :paint safety test
USA Textile Laboratory needed for textile flammability testing to export childrens apparel to the UNITED STATES
Florida Toy Laboratory needed for plush toy testing for: Flammability, toxic, tension, torque, small parts, Phthalates and age grade Thanks
USA Consumer Products Laboratory needed for Consumer Product Safety Commission CPSC Toy Testing: prototype testing plush toy/stuffed animal, potentially for use by children of any age.
California Consumer Products Safety Laboratory needed for consumerproduct safety testing. Tested Required for 18" Oscillating Fan 1. Polarized Plug 2. Lack of Grounding 3. Degrading of Wire Insulation during testing 4. Absence of adequate Thermal Protection 5. Use of plastic Enclosure that did no Self-Extiguish 6. Undersized Power Cord estimated at 24AWG.
Canada Consumer Products Laboratory needed for Consumer Products CPSC testing on a cloth diaper according to CPSC guidelines
Consumer Products Safety Laboratory needed for Consumer Product Safety CPSC Testing of toy jewellery
California Product Safety Laboratory needed for ASTM Testing. Testing the safety-compliance of Engineered Wood Fiber intended for playground use to 1)ASTM F1292-092)ASTM F19513)ASTM F2075-10a4)lab-recommended flammability test
Toy Laboratory needed for Toy Safety Testing: ASTM Testing of plastic toys: 1. ASTM F963, Standard Consumer Safety Specification for Toy Safety Testing 2. ISO 8124 Safety of Toys Testing (Part-1-III) 3. IS 9873 PHTALATES content in toys(Part-1-III) 4. EN 71 Toy Safety Testing Please quote your rates for the same.
Consumer Products Safety Laboratory needed for car crash test safety testing of infant head and neck support approved by CPSC, Consumer Product Safety Commission needs Car Crash Safety Testing.
Europe Consumer Products Laboratory needed for consumer products testing of Baby diapers: pH testing, absorption testing: Baby diapers Absorption Liquid during not more than 10 seconds
India Toxicology Laboratory needed for Pesticide Testing to WHO Pesticide Evaluation Scheme WHOPES standard CIPAC/4682/m
PHYSICAL LABORATORY NEEDED FOR COLOR FADING TESTING ON 2 SAMPLES OF FRP BENCH STRIPS.
Consumer Products safety Laboratory needed for consumer products safety testing of Baby beanbag.
Canada Consumer Products Laboratory needed for toy safety testing of toys and fabrics used in children with special needs
Canada Consumer Product Safety Laboratory needed for Cosumer Product Safety Testing of stuffed animals - 5 samples.
Consumer Products Safety Laboratory needed for ASTM toy testing of muff/handbag/plush animal to be tested as per the ASTM F963-08 standards. How much does this cost and how long will it take?
Europe CPSA Toy Laboratory needed for CPSA Certification Testing of soft toys and board games to comply with US certification
US Consumer Products Laboratory needed for ASTM Testing of Playground Rubber Safety Surfaces to ASTM C1549 - 09 Standard Test Method for Determination of Solar Reflectance Please advise as to how much the average cost of test will be and how we would go about having the test completed.
West Coast USA consumer safety laboratory needed for toy testing toy that consists of many small plastic parts with different solid colors. The components are made out of two types of plastic materials. 1. Thermmo Plastic Elastomer (TPE) and 2. Polycarbonate. I would like to get the toy tested and certified for material safety and any other type of safety requirements required in the U.S.A.
Eastern USA environmental, consumer products laboratory needed for ASTM Testing of playground mulch to astm f 2075-04 and astm f 1292 standards
Physical Laboratory needed for flammability testing of childrens toy to flammability standard is AS/NZS ISO 8124.2 section 4.1.
USA Consumer Products Safety Laboratory needed for CPSA Product Safety Testing of ribbon product about 18 inches long and about 3/8 inches wide. It will be manufactured in China and will primarily be sold to the youth market.
MEXICO CONSUMER PRODUCTS SAFETY LABORATORY NEEDED FOR TOXICITY TESTING OF WATER COLOR TABLETS TO CONFORM TO ASTM D4236
West Coast USA CPSA Consumer Product Safety Laboratory needed for ASTM Lead Testing for lead a child safety for children 3 years and older There will be 7 samples
Texas consumer products safety laboratory needed for consumer safety testing of musical, non-electronic toy prototype that I would like to have analyzed for safety design. I dont need to test for toxins yet, just to see if my design is worth pursuing.
USA Consumer Products Safety Laboratory needed to perform toxicity testing and provide an MDS sheet for the product.
USA FDA Consumer Products Safety Laboratory needed for testing rubber sunglasses for: Bisphenol A Phthalates Lead
For polycarbonate lenses: UV testing
For product box: Lead
Canada / USA Consumer Products Safety Laboratory needed for ASTM F963 toy testing a children's toy - book package with an OID pen ton ensure it meets all ASTMF963 requirements and 16 CFR 1303 regulations.
Asian Materials Laboratory needed for testing rubber flooring products (rubber tiles for playground) in accordance to BS EN1177 standard
USA Consumer Products Safety Laboratory needed for ASTM testing of home playground equipment as per astm f963-08 astm f1148 and 16cfr.
Canada Consumer Products Safety Laboratory needed to have samples of toy plastic soldiers tested to comply with toy safety regulations. Plastic soldiers are for ages over 3 years.
India Consumer Products Safety Laboratory needed for Toy testing as per ISO 8124 or ASTM F963 or EN71 required for 7 toys.
USA Consumer Products Safety Laboratory needed for toy certification testing for toy product.
USA ASTM Consumer Products Safety Laboratory needed for flammability, choking, hazardous materials testing on toys.
Czech Republic Wooden Toy Company needs USA Consumer Products Safety Laboratory for testing and CPSA certificates.
USA Consumer Products Safety Laboratory needed for testing a mostly wooden table game with plastic paddles, wooden ball and plastic jacks, approx. 1.5 inches. No paint.
USA Manufacturer of stuffed made animals and plush products needs Consumer Products Safety Laboratory for testing as follows: Paint & Surface Coating Heavy Solubles Phthalates Physical & Mechanical Tests
Japan Consumer Products Safety Laboratory needed for toy testing (soft items for children from 0-5 years old)
USA Consumer Products Safety Laboratory needed for CPSC testing on writing products and curriculum for sale to schools and home schools. Most items are simply printed materials and need tested for materials and packaging. Some items are toys and need tested to adhere to CPSC regualtions
Eastern USA Consumer Products Safety Laboratory needed for Lead testing (Pb)in Paint and Other Similar Surface Coatings
Consumer Products Safety Laboratory needed for product safety testing on an educational product that is being developed.
Consumer Products Safety Laboratory needed for toy testing a new line of handmade toys that are being imported. We would like to assess what ages they are suitable for and labeling requirements.
USA Product Safety Laboratory required for testing toys for phalates, lead, flamability, and choking hazard
CSPC Product Safety Laboratory needed for product safety testing of childrens clothing. I am starting a clothing line that is somewhat unique and would like to have a safety assessment done to ensure compliance with cpsc guidelines for products intended for use by children under the age of 12.
IRAN ISO PRODUCT SAFETY LABORATORY NEEDED FOR ISO/IEC 17025 TOY TESTING CONFORMING TO IRAN STANDARD OR EN STANDARD"
Canada Consumer Product Safety Laboratory needed for toy safety testing for "stuff doll" cloth material.
Canada Consumer Product, Toy Certification Testing and certification of toy (doll) manufactured in the Philippines to meet federal safety requirements."
USA CPSA Consumer Products Laboratory needed for CPSC-CH-E1003-09 testing for lead levels in a children's products. digestive - lead paint/durable child furnitureScrape paint off and digest it.