Contract Laboratory has received the following Radiological Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Radiological Laboratories to perform their Radiological Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Radiological laboratory that would like more information on these Radiological projects, please visit our registration page or call toll us free 1-855-377-6821.
USA Food Laboratory (prefer West Coast, California) needed for drinking water testing to NSF/ANSI Standard 42: Drinking Water Treatment and NSF/ANSI Standard 53.: Test 1 for Filter 1. Radiological Test of gravity fed filter
Test 2 for Filter 2. Inorganic and organic, test of gravity fed filter.
USA EPA Environmental Laboratory needed for radiological testing on drinking water. We want to have a lab spike water with Cesium 137 and on a lower priority Strontium 90 and Plutonium and run the spiked water through our water distillers to determine removal from the product water. We have done Uranium (100% removal) Strontium 90 (91% removal) but need to get data on cesium and an update on Strontium and Plutonium.
Botswana Radiological Laboratory needed for radioactive testing to be done on "ash from coal powered electricity", "coal used in thermal production of electrical power" and "waste rock from coal mining". The analysis will be on 238U, 235U, 234U, 224Ra, 226Ra, 40K, 230Th and 232Th
Preclinical Contract Research Organization needed for two preclinical pharmacology studies - Microsurgery rat model: 1)distribution study with iodine-radiolabeled APL001, applied locally during microsurgery. Measurement of radiological activity by scintillation counter.
2)rat thrombosis model of microvascular anastomosis and measurement by flow probe and SEM. Local application of APL001 during microsurgery.
Analytical Chemistry Laboratory (that has a radiological license and is certified by the State of New Jersey and the US Army Corps of Engineers) required for typical environmental testing parameters; VOCs, SVOCs, Pesticide/PCBs, metals including ICP/MS capability, cyanide, BOD, phenols and TPH
Singapore Radiological Laboratory needed for Gross Alpha Test and Gross Beta Test (first step screening) on the water to determine the radioactivity (gross alpha/beta particle activity) (measured in pCi/L, pCi - picocurie). The test basically identifies the presence of gross alpha particle or beta particle emitted by radionuclides in water sample.
FDA 510(k, GLP, ISO, ASTM Bioanalytical and Microbiology Laboratory needed for the following:
Medical Device Sterility Testing
Medical Devices Microbiology Testing
Medical Device Microbial Identifications Testing
Medical Device USP Microbial Limits Testing
Medical Device USP, AAMI, EP Bacteriostasis/Fungistasis Testing
Medical Device Product Inoculations Testing
Medical Device Bioburden Testing
Total Fungi Testing
Total Aerobes Testing
Total Coliforms Testing
Ethylene Oxide Biological Indicators Performance Testing
Steam Biological Indicators Performance Testing
Medical Device Sterilization Validation
Medical Device Sterilization Dose Validation
Medical Device AATCC and ASTM Antimicrobial Testing
Medical Devices Ethylene Oxide Residuals Testing
Medical Devices In-Vivo USP, JP, EP Pyrogen Testing
Medical Devices Bacterial Endotoxin Testing - Limulus Amebocyte Lysate LAL Testing
Medical Devices Bacterial Endotoxin Testing - Gel Clot Testing
Medical Device Radiological Testing
Medical Device Environmental Monitoring Testing
Reusable Device Studies Testing
Medical Device Barrier Testing
Medical Device Product Safety Testing
Medical Device Container/Closure Testing
Medical Device Leachables Testing
Medical Device Biomaterial Extracts Protein Assays
Medical Device ASTM Extractables Testing
Need estimates within the week for budget deadline
ISO Radiological laboratory needed for ISO 17025 beta particle and photon activity testing
(40 CFR §141.16) 4 mrem/y 0.4 mrem/y
gross alpha particle activity
(40 CFR §141.15) 15 pCi/L 1.5 pCi/L
combined radium 226 and 228
(40 CFR §141.15) 5 pCi/L 0.5 pCi/L
uranium 0.02 mg/L
Analyses for radionuclides shall be performed in accordance with Prescribed Procedures for
Measurement of Radioactivity in Drinking Water, EPA-600/4-80-032. When no EPA method is provided,
analyses shall be performed in accordance with Standard Methods for the of Water and Wastewater
(most current edition). If neither of these two references address the required parameters and matrix, or if
an alternate method is desired, method validation shall be completed prior to the application of the
Analytical and radiological laboratory needed for BP93 testing of X-ray detectable yarn made from polypropylene and loaded with a high content of barium sulphate. This yarn consists of 40 filaments, wrapped with a fine polyester thread. It can be used in the manufacture of X-ray detectable gauze swabs and sponges. Because the yarn is opaque under x-ray irradiation, when it is woven into the fabric, it can help to ensuring secure checking and avoid serious medical incidents. TEST ITEMS:BP Yarn Decitex:3400－4200detex Weight of Yarn:0.28g/m (minimum for multifilament yarn) Tenacity:≥1.9cN/tex Extension:≥200％ Barium Sulphate Content:55% minimum Maximum Heavy Metal Content:≤20ppm X-Ray Opacity:BP93 Above items like Yarn Decitex, Tenacity and Extension is not in BP93 of x-ray detectable component. Please test them according to relative standards of fiber.
Analytical and radiological laboratory needed for BP93 testing of X-ray detectable yarn made from polypropylene and loaded with a high content of barium sulphate. This yarn consists of 40 filaments, wrapped with a fine polyester thread.
It can be used in the manufacture of X-ray detectable gauze swabs and sponges. Because the yarn is opaque under x-ray irradiation, when it is woven into the fabric, it can help to ensuring secure checking and avoid serious medical incidents.
Weight of Yarn:0.28g/m (minimum for multifilament yarn)
Barium Sulphate Content:55% minimum
Maximum Heavy Metal Content:≤20ppm
Above items like Yarn Decitex, Tenacity and Extension is not in BP93 of x-ray detectable component. Please test them according to relative standards of fiber.
"We are a producer of compounds labeled with stable isotopes, like Deuterium, Carbon-13, Nitrogen-15. Our product line is comprised of amino acids, fatty acids, sugars, steroids and others. All categories are labled with stable isotopes. We have an overflow of synthetic work that we would like to subcontract to outside laboratories. "
GMP Compliant lab to perform the following: Full Monograph Testing (individual and total) for the following items:·,Magnesium Stearate·,Maltodextin·,Polyethylene Glycol·,Silicon Dioxide,·Stearic Acid·,Croscarmellose Sodium,,Dibasic Calcium Phosphate·,Lactose Monohydrate·, Specific Rotation for Ephedrine HCl·,Diphenhydramine HCl Organic Nitrogenous Bases for a pharmaceutical company
assess the androgenic activity, in a quantitative fashion, of a single steriod with the trivial name tetrahydrogestrinone(THG) in a pilot scale study. Either an aquatic organism model or rodent model would appear adequate to provide the information desired but other potential testing types will be considered such as in-vitro receptor binding studies. The study should compare the relative androgenicity of THG to a reference compound such as testosterone
Bioanalytical Laboratory needed for Vitamin detection on Fetal Bovine Serum. Following is a list of vitamins and detectable units:
Vitamin B-12 pg/mL
Folic Acid ng/mL
Vitamin B-6 ng/mL
Thiamin B-1 ng/mL
Vitamin H Biotin pg/mL
Riboflavin B2 ng/mL
Vitamin A Retinol ng/mL
Vitamin C ng/mL
Microbiology Laboratory needed for microbial analysis SB 3112. The test material consisted of only the bacterial spores at a count of 55 x 107 cfu/ml. The tests were run in compliance with the following protocols: 1 USEPA FIFRA;GLP Standards 40 CFR 160 2 USEPA TSCA 40 CFR 792 3 Org. Economic Coop. and Dev. Principles of GLP, Annex 2, C(97)186 4 Japan Ministry of Ag, Forestry & Fisheries, Notification No. 59 Noshan 3850, Director-General of Agricultural Prod. Bureau, 10 Aug 84
Preclinical toxicology laboratory needed for Cytotoxicity studies: MEM Elution Sample Amount: 120 cm2 or 4 grams Irritation: Intracutaneous Reactivity (ISO) (w/2 extracts) Sample Amount: 240 cm2 or 8 grams Sensitization: Magnusson-Kligman (w/2 extracts) Sample Amount 600 cm2 or 32 grams (6 samples minimum) Sensitization: Local Lymph Node Assay: Sample Amount 400 cm2 or 20 grams