Incoming Plastics, Polymers and Rubbers Laboratory Test Requests

Contract Laboratory has received the following Plastics, Polymers and Rubbers Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Plastics, Polymers and Rubbers Laboratories to perform their Plastics, Polymers and Rubbers Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Plastics, Polymers and Rubbers laboratory that would like more information on these Plastics, Polymers and Rubbers projects, please visit our registration page or call toll us free 1-855-377-6821.

Below are our 50 most recent Plastics, Polymers and Rubbers laboratory test requests. Please log in to see more.

Test Request 15-01751

Plastics, Polymers and Rubbers

Materials Laboratory needed for ASTM LEAP test as per ASTM standard ASTM D6499-12 (Inhibition ELISA.) to certify the product is latex free.

Closed

Test Request 15-01729

Plastics, Polymers and Rubbers

United Arab Emirates Materials Laboratory needed to test our plastic product Polypropylene granules for the following

Composition
*Appearance
*Density
*Melting point/Range
*Melt Flow Rate
*Ignition Temperature
*Hazardous Status
*Solubility
*Molecular weight distribution

Closed

Test Request 15-01660

Plastics, Polymers and Rubbers

Materials Laboratory needed for ASTM Testing: Mullen burst test on rubber according to ASTM D751, Standard Test Methods for Coated Fabrics

Closed

Test Request 15-01648

Plastics, Polymers and Rubbers

Materials Laboratory needed for Ultra Violet testing of panels used for contact staining for rubber per ASTM D 925

Closed

Test Request 15-01439

Plastics, Polymers and Rubbers

Plastics Laboratory needed for Polyurethane
Testing of Polyurethane foam Polyurethane elastomer and Polyurethane Thermoplastic

Closed

Test Request 15-01426

Plastics, Polymers and Rubbers

Europe or USA Materials Laboratory needed for research study for Removing Unwanted VOC's through vacuum stripping. Testing vacuum stripping under different conditions to optimise removal of VOC's in a recycled polymer compound

Closed

Test Request 15-01274

Plastics, Polymers and Rubbers

Materials laboratory needed for polyurethane foam testing

Closed

Test Request 15-01098

Plastics, Polymers and Rubbers

Manufacture of rubber parts and seals for industrial applications needs materials laboratory for certificaiton testing of seals

Closed

Test Request 15-00001

Plastics, Polymers and Rubbers

Saudi Arabia Materials Laboratory needed for Plastic film testing of EVA sheet.All laboratory test required in plastic film industry as will as reporting and SOP development, high skill in PC software word excel..etc

Closed

Test Request 14-00629

Plastics, Polymers and Rubbers

India polymer laboratory needed for ASTM Testing and BIS Testing: Epoxy Testing of more than 200+ samples to be tested of epoxy components. having resins and hardners.

Closed

Test Request 14-00618

Plastics, Polymers and Rubbers

Polymer Laboratory needed for PET resin sysnthesis and characterization testing to synthesize, characterize and synthesize PET resin. We have ethylene glycol (EG), and we would like to compare PET synthesized from our EG with conventional PET"

Closed

Test Request 14-00590

Plastics, Polymers and Rubbers

India polymer laboratory needed for polymer testing: Thermal Conductivity Testing for 'K' value Polyurethene Foam (PUF)

Closed

Test Request 14-00541

Plastics, Polymers and Rubbers

Canada Plastics Laboratory needed for ISO Testing: Heat deflection temperature for 2 injected plastic bars for each materials to ISO 75 Heat Deflection Temperature

Closed

Test Request 14-00537

Plastics, Polymers and Rubbers

Texas plastics laboratory needed for DIN Testing performed on plastic sheeting to
DIN 53370
DIN 53378
DIN 5388
DIN 53455

Closed

Test Request 14-00529

Plastics, Polymers and Rubbers

USA MicrobioogyMaterials Certification Laboratory needed for ASTM Certification Testing to ASTM D6413, Antibacterial Analysis. Type of Product: cetinete of tissue (90.4% Polyamide, 9.6% Spandex).

Closed

Test Request 14-00528

Plastics, Polymers and Rubbers

India Polymer Laboratory needed for polycarbonate analysis of powder.

Closed

Test Request 14-00451

Plastics, Polymers and Rubbers

Plastics Laboratory needed for plastics comparison testing: Compare two different plastics to a burned plastic to indicate which plastic in contained in the burned materials.

Closed

Test Request 13-00859

Plastics, Polymers and Rubbers

Saudi Arabia, UAE, India, Middle East, GCC Plastics analytical chemistry laboratory needed Analytical Chemistry Laboratories for carbon black testing of recycled tyres and to analyze the chemical characteristics/specifications/ Contents of the recycled tire derived products such as Pyrolytic Oil and Pyrolytic Carbon Black. Product samples shall be sent to the qualified laboratory upon receipt of acceptable price quote.

Closed

Test Request 13-00686

Plastics, Polymers and Rubbers

Plastics Laboratory needed for ASTM Testing of Polyethylene lined material to establish various measures. 1. Physical tests? a. Hardness test (ASTM D 2240), b. Density test (ASTM D 792 or ISO 1183-1), c. Thermal expansion test (with Netzsch dilatometer), d. Erosion resistance test (at different angles and temperature), 2. Gas permeation, diffusion & solubility (PDS) test with CO2 gas at temperatures 60, 75 and 90 C, 3. Hydrocarbon uptake & PDS data with Crude oil & Condensate medium, 4. Blow down test (as per NORSOK 710 or equivalent standard), 5. Ring test, to determine the adhesion strength We request you to let us know, whether you can carry out the tests mentioned above. And if so, how do we go further with respect to test material requirement and commercial implication, etc. However, if these tests are not being carried out in your lab, we will be obliged if you could suggest such laboratory(ies) where we can approach for our purpose. Thanking you for your time and let us know, if you require any further information in case you feel necessary to understand our requirements.

Closed

Test Request 13-00676

Plastics, Polymers and Rubbers

Israel, USA or China plastics laboratory needed for glass fiber testing: Silica Glass Fiber Cord
Polyethylene terephthalate fiber
Silicone covered Fiberglass tubing
Nickel Chrome heating wire
Various materials used for labeling
Rubber plugs for sealing

Closed

Test Request 13-00665

Plastics, Polymers and Rubbers

ISO Accredited Africa Laboratory or Europe Laboratory needed for bio-degradability Testing of bio-degradation of plastic packaging material.

Closed

Test Request 13-00562

Plastics, Polymers and Rubbers

Southern California Plastics Laboratory needed for random third party testing: quality control testing of our production line for: tensile, impact, heat distortion, moisture, etc. for engineering resin

Closed

Test Request 13-00535

Plastics, Polymers and Rubbers

Asia Mechanical Laboratory needed for SAE Testing of Fuel pipe for engine, would like to be tested from SAE.

Closed

Test Request 13-00526

Plastics, Polymers and Rubbers

Plastics Laboratory needed for plastics testing: Size Exclusion Chromatography Service needed. Quotation on a per sample basis. Phenolic Resins, molecular range 100-10,000. Polystyrene Calibration, plotted chromatograms, calculated molecular weight and number average for resins.

Closed

Test Request 13-00508

Plastics, Polymers and Rubbers

USA Plastics Laboratory needed for polyester testing : Test Polyester Sewing Thread Test Thread per Fed STd-191 Method 4804&5804.

Closed

Test Request 13-00505

Plastics, Polymers and Rubbers

USA Plastics Laboratory needed for Fiber reinforced Plastic coupon testing 1) Glass content, wt percentage. 2) tensile strength, 3) flexural strength, 4) tensile modules, 5) flexural modules 6) peel test & lap shear test for Pvc Frp coupon.

Closed

Test Request 13-00479

Plastics, Polymers and Rubbers

India Plastics Laboratory needed for Testing as per IS 12866:1989 for light diffusion of Fibreglass Reinforced Polymer Roofing Sheet

Closed

Test Request 13-00433

Plastics, Polymers and Rubbers

Toronto Plastics Laboratory needed for plastics Testing of sample pieces of HDPE and LLDPE plastics to ASTM E1354 at an incident heat flux of 50KW/M^2 in the horozintal Orientation.

Closed

Test Request 13-00432

Plastics, Polymers and Rubbers

Government needs North Carolina laboratory for raw material testing nylon testing.

Closed

Test Request 13-00419

Plastics, Polymers and Rubbers

India Toxicology Laboratory needed for toxicity testing of latex from Wrightia tinctoria plant has toxic effect on humans taken in any quantity with curd

Closed

Test Request 13-00384

Plastics, Polymers and Rubbers

United Arab Emirates Materials Laboratory needed for ASTM Testing Mechanical, Material and Analytical Analysis of Polyethylene: Cross Linked Closed Cell Polyethylene FOAM; primarily used for Thermal Insulation. We want to perform some tests as per ASTM standards.1. Compression deflection as per ASTM D3575 D 2. Flammability as per ASTM D3575 M 3. Energy absorption as per ASTM D3575 R2 4. Buoyancy as per ASTM D3575 AA 5. Constant compression creep as per ASTM D3575 BB 6. Dynamic cushioning as per ASTM D3575 CC 7. Emittance as per ASTM E-4088. Ignitability as per EN ISO 11925-2

Closed

Test Request 13-00373

Plastics, Polymers and Rubbers

India Plastics Laboratory needed for plastics testing: Tensile testing of cotton based fibre rainforcement plastic Breaking load,Strain & Stress at failure,%Elongation,Elastic modulus,Stress Vs Strain Plot,Load Vs Deflection Plot

Closed

Test Request 13-00324

Plastics, Polymers and Rubbers

South Africa plastics laboratory needed for lastics testing: Relative Viscosity on plastics
Vicat

Closed

Test Request 13-00315

Plastics, Polymers and Rubbers

India analytical chemistry laboratory needed for oil testing of highly viscus oil

Closed

Test Request 13-00297

Plastics, Polymers and Rubbers

Florida materials laboratory needed for Peel and Shear testing for HDPE or XR-5 liner mateirals.

Closed

Test Request 13-00276

Plastics, Polymers and Rubbers

Plastics Laboratory needed for polypropylene testing: % etyhlene in PP and how much is cost per sample.

Closed

Test Request 13-00265

Plastics, Polymers and Rubbers

USA Plastics Laboratory needed Melt Flow Index or Melt Volume Ratio of thermoplastic urethane pellets. Looking for impartial testing for discrepancy between manufacturer and customer results.

Closed

Test Request 13-00231

Plastics, Polymers and Rubbers

Plastics laboratory needed for ASTM Testing of 7-8 samples of vinyl sheet piling. Tensile strength, IZOD impact, transmissivity and equivalent permeability, heat deflection, and UV stability degradation.

Closed

Test Request 13-00222

Plastics, Polymers and Rubbers

Middle East materials laboratory needed for teflon testing of samples of teflon rods and sheets in dubai for the exact composition of the mixture in it.

Closed

Test Request 13-00216

Plastics, Polymers and Rubbers

USA Materials laboratory needed for polyethylene foam testing to FMVSS Standards: CMVSS/FMVSS 302 horizontal burn rate testing on Cross-linked Polyethylene Foam.

Closed

Test Request 13-00162

Plastics, Polymers and Rubbers

Europe plastics labroatory needed for DIN antistatic testing to DIN 53482 to determine the antistatic feature of artificial leather we are going to develop

Closed

Test Request 13-00123

Plastics, Polymers and Rubbers

Asia UKAS physical laboratory needed for ISO color fastness testing in air vent made out of ABS . as now it get yellow from white in 6 months.need test to meet uka nd eu standerd.need specification to produce and test.
"

Closed

Test Request 13-00086

Plastics, Polymers and Rubbers

USA materials laboratory needed for polymer testing of R&D polymer sample for screen Anti-microbi ability of polymer solution2. DSC of Melt and Tg transion temperature3.surface tension in 0.1% solution4. foam height by Ross-Miles test.

Closed

Test Request 13-00081

Plastics, Polymers and Rubbers

Europe Materials Laboratory needed for ISO Testing or ASTM Testing: mechanical stability for nathural and synthetic latex

Closed

Submit Plastics, Polymers and Rubbers Testing Requests for Plastics, Polymers and Rubbers testing and Plastics, Polymers and Rubbers Scientific Research