Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Plastics and Polymers Laboratories to perform their Plastics and Polymers Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Plastics and Polymers laboratory that would like more information on these Plastics and Polymers projects, please visit Register Laboratories or call toll free 1-855-377-6821.
USA plastics laboratory needed for resin testing for Molecular weight determination for an oligomer resin
Microbiology Laboratory needed to test anti-biofilm activity of titanium discs uncoated and coated with a polymer. I need 3 assays with titanium discs uncoated and coated with a polymer to verify anti-biofilm activity for anaerobic bacteria involved in peri-implantite.
USA Materials laboratory needed for ASTM Testing for melt point determination to ASTM D789, and dimensional stability. My sample is type 66 molybdenum disulfide-filled nylon. Could you provide me the following:
1. Pricing 2. Standard and rush turn around time, and its fee.
India Laboratory needed for Poly tetra flouro ethylene testing to issue &certified authority products is free from Transmissible Spongiform Encephalopathy declaration.
Materials Laboratory needed for biodegradability testing of lab that an antifoam to determine if it is biodegradeable.
USA Materials Laboratory needed for ASTM Testing: gel content of polyethylene samples using ASTM D2765-11, Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics (xylene or Decalin extraction, boiling solvent, sample in wire mesh cage, weight loss after 6-12 hours in boiling solvent, then vacuum oven).
Polymer laboratory needed for molecular weight testing by mass spec analysis of the polymer. It is new inert ingredient submission to US EPA under their low risk polymer exemption rule.
India NABL accredited laboratory needed for abs and san plastic product materials testing
Materials laboratory needed for Thermal Conductivity testing of DIN EN ISO 8497 for our rubber insulation
Food laboratory needed for food contact surface testing for FDA 176.170 CERTIFICATION FOR OUR EMULSION POLYMER WHICH IS USED IN COATING THE BOARD USED FOR PACKAGING OF LIQUIDS like FRUIT JUICES
We will be sending you the list of inputs in our polymer emulsion so testing may not be required.
USA Contract Laboratory needed to provide Polynuclear Aromatic Hydrocarbon (PAH) testing according to EPA 8310. It involves determining the concentration of PAH in ground and wastes using HPLC. The sample is graphite powder. Could you provide me the following information:
Price per sample Minimal sample quantity Turnaround option (standard and rush, what surcharge) Shipping address
Materials laboratory needed for IEC electrostatic testing of polyethylene sheet to to IEC 61340-4-4, Electrostatics standard for its electrostatic properties.
FDA GMP Polymer Laboratory needed to assist to file GRAS and/or FCN for our product(s), as well as capable in conducting all the FDA required test in order to obtain the FDA approval on polymer product.
Pls enlighten us on the details of phases/process, analysis, cost and lead time.
Contract Laboratory needed for testing to EN1621-2 Level 2, Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits
Materials laboratory needed for f PROPYLENE GLYCOLtesting for appearance, PG content, moisture, density, index of refraction, acidity, distillation range, color (Pt ? Co).Please provide the price of this analysis? What the minimum amount of material and packaging is necessary for research sample?
Plastics Laboratory needed for ASTM Testing: Brittleness Temperature testing performed to ASTM D746 on thermoplastic urethane. I need baseline number so am looking at measuring 2 lots.
Materials Laboratory needed for analysis for total chlorine content on DVB-Styrene crosslinking gel samples.
Third-Party Microbiology laboratory needed for ASTM microbial degradation of Polyethylene using a multi-strain inoculum and searching for a third party lab to confirm degradation using ASTM D7475 ? 11.
URGENT United States Materials Laboratory needed for DBL 5404 Odour Test for PPT40 Grade Resin... Please provide cost of this test ASAP.
Manufacturer needs Consumer Products Safety Toxicology Laboratory for product safety and toxicology testing of fabric-based product.for
- Cytotoxicity testing. - Sensitization testing. - Irritation or Intracutaneous Reactivity Testing - Specific testing on Urethane materials: 0 mmHg for 3s to 150 mmHg and hold for 3s for a minimum of 100,000 cycles.
Coatings Company needs polymer lab that can test National Fire Protection Association NFPA via ASTM D6668. Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1 Samples are water based polyurethane resins.
Materials Laboratory needed for ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials Lab testing quote for Flame Spread. One sample
Environmental simulation laboratory needed for accelerated simulation testing that simulates ocean shipping environmental conditions experienced shipping from Asia to us on the ocean. The material is a molded EVA that I need to understand dimensional stability before and after the shipment process. Please reply with contacts who could provide this in an accelerated manner. South east Asia based would be good. Thanks tom
Polymer lab needed for film testing that can run ASTM E 2178 but using CMU blocks instead of a thin film. The coating we are wanting to test is a water based air barrier which we are trying to certify to ABAA criteria.
Plastics Materials Laboratory needed for Polytetrafluoroethylene PTFE Testing of PTFE UV transmittance in the 250 - 260 nm range Objective: To establish the % transmittance of a PTFE sample of : 1) 0.50 mm thick; Sample size = 1. 2) 0.30 mm thick; Sample size = 1. 3) 0.10 mm thick; Sample size = 1.
Deliverable: A 1-to-2 page report in electronic format. The report should include methods and results. The results to be presented in a graph as wavelength vs. % transmittance
Materials Laboratory needed for ASTM Testing of Erucamide slip counts in polyethylene pellets to ASTM D6953, Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC) or other test methods
India or United Arab Emirates FDA and ISO Materials Laboratory needed for xenon arc exposure testing of polyester film and polyester chip & film . The xenon arc exposure test of our UV polyester film for 1000hr.
Middle East Materials Laboratory needed for Gel Permeation Chromatography for HDPE Material GPC Testing
Materials Laboratory needed for Synthesis of candidate catalysts and verification of activity in lab validation tests. Able to handle lpg olefin monomers. Calcination at 250-700 deg C. Catalyst activation with Lewis acids. Conduct small scale batch pplymerization reaction to verify catalyst suitability. Analyze by GC but more preferably by C13 NMR.
Materials Laboratory needed for ASTM outgassing testing to ASTM E595, ASTM E595 - 15 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
Midwest USA laboratory needed for halogen lamp degradation study of plastic joining technology for measuring the infrared output of a halogen bulb used in a joining technology for Infrared radiation to melt a plastic boss, which is then formed by a metal punch, joining two plastic parts together. Our intent is to learn more about the degradation of a halogen lamp and how that degradation affects the Infrared wavelength. Ultimately we would like to be able to have the halogen lamps that we use in our process tested to determine the way in which they degrade. I have determined that by using a spectrometer we can accomplish a test that meets our needs.
India materials laboratory needed for test the parameters of HDPE,POLYPROPYLENE and ABS samples as follows 1.density 2.Melt flow index 3.Grade name(purity) 4.Tensile Elongation and flexural test 5.Melting point 6.Yield stress 7.Elastic modules kindly send the quotation as early as possible.
Startup developing new polymer material for fibers and textile needs complete UV degradation tests wfor different polymers (before extrusion process, not a fiber/fabric). Can you send me a quote for 3 samples testing.
Midwest materials laboratory needed for ASTM testing of multiple reinforced adhesive tape samples for tensile testing
Large Consumer Products Company needs polymer physical chemistry laboratory for Pore size distribution and porosity Pore characterization of hollow fiber polymer membranes
Large plastics company needs polymer laboratory for polypropylene testing: measure MFR of polypropylene but of very high MFR (~ 1200 g/10'). Measument of such a high MFR requires smaller sized die opening.
USA Materials Laboratory needed for complete analysis of a sample of an antifoam based on these specific tests
FLASH POINT °C ASTM D-93 POLIAROMATIC AND AROMATIC SOLVENTS CONTENT % Weight ASTM D-6730 PH ASTM E- 70 VISCOSITY Cp ASTM D-445 ORGANIC CHLORIDES CONTENT % ASTM D-4929 IR INTERPRETATION-CHEMICAL GROUP ASTM E-1252
Large electronics company needs United States, Japan or Europe Physical Laboratory for ASTM D2628 neoprene testing: Physical Test for Polychloroprene(Neoprene) Elastic Joint Seal Following ASTM D2628 - Tensile Strength - Elongation - Hardness - Oven Aging - Oil Swell - Ozone Resistance - Low Temperature Stiffening - Low/High Temperature Recovery
USA ISO 9001 certified materials laboratory needed for ASTM Lubricant or Plastics Testing: thermal conductivity testing on lubricants, ASTM D2717 or ASTM D5930
Plastics Laboratory needed for plastics materials process chemistry research study to perfect a reliable, fast and economical method for creating a thermoset plastic-type compound from rosin and the oil of the flax seed plant. Probable involvement in ASTM testing, NFPA, ISO.
United States materials laboratory needed for ASTM Testing of foam to ASTM D3575-BD, Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers compression/deflection, and compression set.
Middle East, Asia or Europe Materials Laboratory needed for Plastics Testing: ASTM Testing to ASTM D746, Brittleness Temperature of Plastics
Asia polymer laboratory needed for HDPE Testing: Test 3D filaments made of recycled HDPE flakes
Plastic manufacturing factory needs Saudi Arabia materials laboratory for plastic analysis.
Midwest USA physical chemistry laboratory needed for materials Testing to measure specific gravity of dry soy flour / powder
URGENT: Large Hydrocarbon company needs Physical Laboratory for ASTM C518 and ASTM C177 testing on Polyurethane foams. Also require thermal conductivity testing at -165degC for the same. Urgent requirement.
Polymer Laboratory needed for Polymer Identification. A polymer sample in form of a circular disc needs to be identified by ATR/FTIR/RAMAN
UNIVERSITY RESEARCHER NEEDS LABORATORY FOR POLYMER HYDROGEL STUDY TO ANALYSE BIOCOMPATABILITY TEST AND CYTOTOXICITY TEST
Materials laboratory needed for ASTM or ISO Testing for for plastic technology softening point for toner resin, using capillary rheometer
Plastics Laboratory needed for plastics testing.Test contents in plastic parts.
Ethylaminobenzoate Heptaoxacyclopentatriacontane Hexaoxacyclotriacontane Tetraoxacycloeicosane Pentaoxacyclopentacosane N, O cmpd MW=>193
For a pre-test purpose of NSF61 re-submission
USA Certified A2LA ISO 17025 laboratory needed for Gravimetric Particle Analysis to ISO 16232-7 Plastic Injection Molded Back-up Sensors 2 Part Numbers 16 pieces part number Parts are plastic with metal inserts Part dimensions are approximately 2" X 1".
Europe Plastics laboratory needed for polymer testing of transparent Polycarbonate Sheets to UNI 13468-2 which thickness are around 100 micron.
Polymer Laboratory needed for PSTC or IEC Testing toPSTC-56 or IEC 60454-2: A resistance to penetration at elevated temperature test carried out on up to 10 different polymer film. A ball of 1.5mm diameter is pressed into the surface under a 10N load. Temperaure when the ball penetrates throught the film is recorded
East Coast USA polymer laboratory needed for PMMA Testing: 6 samples of PMMA that we need the following tests performed on: DSC - under Nitrogen -10 deg. C to 350 deg. C TGA - 40 - 500 degrees C
USA laboratory needed to distill a per fluorinated poly ether for us. Initial volume 1 gallon, with follow on work. CAS 69991-67-9
We have done this the past, but our company no longer as the capabilities. Complete work instructions can be provided.
Electrical laboratory needed for materials testing: Dielectric Constant according to ASTM D150, - DC Resistance & Conductance according to ASTM D257 - Electrical Resistance according to ASTM D257 OR D991.
Microscopy Laboratory needed for scanning electron microscope SEM images taken of a 2 denier Acrylic fiber to look for evidence of fiber finish on the surface or in cracks in the fiber surface. Please specify costs.
East Coast Polymer laboratory needed for ASTM Testing for Polymer Testing: Physical Properties of Poly-nitrated Oxetane such as density, viscosity, average molecular weight, molecular structure if possible, flammability, or other data needed to flesh out an MSDS safety sheet.
Europe polymer laboratory needed for ANSI Testing of polyurethane slab stock foams for Volume resistivity&Surface resistivity according ANSI/ESD S 20.20 ANSI/ESD S 541 We need test protocol with international validity. The lab must be Accreditation. Thank you in advance. With our best regards. Simeon
India materials laboratory needed fr ASTM Testing. Test our Rigid Polyurethane Foam for the Thermal Conductivity as per ASTM- C - 177 or IS:3346, Method of the determination of thermal conductivity of thermal insulation materials
Asia polymer laboratory needed for reverse engineering of polymer material for material identification and reproduction
Polymer Laboratory needed ASTM plastics testing: ASTM D7573 (Total Organic Content) We have Plastic Tubing that requires the following test:
ASTM D7573 ? Total Carbon & Organic Carbon in water by High Temperature Catalytic Combustion & infrared Detection Deionized water or ASTM Type II Water Hose Leachable material preparation:
A 12 inch min section of tubing should be filled with deionized water or ASTM Type II water, then sealed & stored for 6 days at 120 +/- 10 degrees Fahrenheit.
USA Materials laboratory needed for plastics testing: RoHS quote on plastic components. 3 assemblies
Tests seeking: 1.Lead (Pb) 2.Mercury (Hg) 3.Cadmium (Cd) 4.Hexavalent chromium (Cr6+) 5.Polybrominated biphenyls (PBB) 6.Polybrominated diphenyl ether (PBDE)
A. assembly has 4 plastic components B. assembly has 2 plastic components, and 1 brass component C. assembly has 4 plastic components
Industrial Hygiene laboratory needed of ASTM elemental trace analysis of the indoor air in our manufacturing building using ICP-MS or GC-MS. Mainly we're most concerned about sulfur. There will be 7-8 samples.
Polymer Laboratory needed for Permeability test of PET (Plastic 120 ml size) bottles.
USA polymer laboratory needed for rubber testing: Max load test on rubber deflector 5 piece test on what is the max load these rubber components can withstand.
New Jersey Laboratory needed for Microstructure steel / Tungsten testing including: Mount parts. polish, etch and picture the micro structure.
Asia / India Materials Laboratory needed for ASTM Testing: Thermal aging of rubber in n propane pressurized container ASTm D 471
United States polymer laboratory needed for REACH compliance testing: project that has been approved that will use our reprocessed Copolymer Polypropylene black pellets.
In order to move forward with this project, our customer is requiring us to provide them with a REACH compliance letter along with test data.
I am in search of a company that will be able to provide this information for us.
USA Materials Laboratory needed for ASTM polycarbonate testing to ASTM G153 test cycle 1 environmental weathering testing:
15 flat samples (2x2 inch) 15 curved samples (2x2 inch)
All samples are directional
requesting 500hr and/or 1000hr
evaluation visual for color change, hazing, optics
North Carolina laboratory needed for OECD biodegradability testing to determine OECD 302 biodegradability understand the biodegradability of our biopolymer that is made with a starch and hemicellulosic backbone.
USA electrical laboratory needed for ASTM Testing: Dialectric constant of polymer film
East Coast USA Mechanical Laboratory needed for polyurethane testing with ~ 400% elongation. The testing requires an extensometer attachment to a tensile tester. each test will consume three samples. we will need between 10 to 20 test performed over a 1 month period.
Middle East Polymer laboratory needed for UN certification testing for polypropylene Woven Jumbo bags (FIBC) ,
India analytical chemistry laboratory needed for Glycol testing. The following test results are required. 1. Name of the Glycol used. 2. Concentration of the Glycol with water 3. Viscosity of the glycol.
Manufacturer of polymer film used in the food packaging industry needs ISO FDA GMP and NABL Packaging Laboratory for ASTM and ISO heat seal coating testing of heat seal product which is used in packaging of wet and dry product like pickles, Jams, Ketchup?s etc. We would like to carry out the test which shows is the chemicals present in the liquid products can react with the coating done on film or not. Please send quotation to perform .
USA packaging laboratory needed for polymer testing: determine index of refraction of 2-8 micron polymer on 100 micron substrate by prism coupling methods
USA Materials Laboratory needed for ASME Testing of Water vapour permeability according to ASME-E96, product Polypropilene NonWoven laminated with Polyethilene Breathable film
Europe or Middle East Laboratory needed for materials testing : Coating testing to EN10290 for Qualification of polymer pipe coatings
Resin manufacturer needs packaging materials laboratory for polymer testing of the film laminate with other substrates like PE, etc to make a test sample of laminate film used in packaging industries..
University Researcher needs India polymer laboratory for polymer research TGA,2- DSC.
Polymer Laboratory needed for NORSOK Testing: NORSOK M-710,Qualification of non-metallic sealing materials and manufactures. what is the price for one material?
University Researcher needs Materials Laboratory for polymer composite testing including microtome into cross-sections of interface of composite with epoxy and fiber and AFM testing.
Plastics Laboratory needed for peel strength test machine according to BS EN 13121-3;2008 and other relevant standard to check the peel strength of thermoplastic lined frp laminate.
Spain Materials Laboratory needed for ASTM Testing to ASTM D471 and ASTM D413: Materials, mechanical (Polyurethane Layflat Hose for fuel transfer) MIL-PRF-370J 220.127.116.11.3 Adhesion after fill test (type C hose only). A 12-in. section of hose shall be stoppered and filled with reference fuel B as specified in ASTM D471. The section of hose with the test fluid shall be maintained at a temperature of 160 ± 2°F for not less than 46 hours. At the conclusion of the 46-hour cycle, cool the hose to 71 ± 9°F and stabilize the temperature. Within 15 minutes after removal of the test fluid, specimens shall be cut from the hose and tested IAW ASTM D413, machine method. Nonconformance to table III shall constitute failure of this test.
Malaysia or United States materials laboratory needs polymer laboratory for epoxy testing of one customized epoxy to evaluate the dielectric value for this part. I suspect the dielectric constant will be approximately 10+/-10% at 50 kHz. For samples, I will send to your company for testing. Samples size will be less than 5 pieces.
Materials Laboratory needed for plastics ASTM Testing to ASTM D785-08 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
Plastics Laboratory needed for polymer composite testing to determine diffusion coefficient in compostes and polymers.
Pultrusion company looking for Europe plastics laboratory for ISO mechanical, electrical and heat testing s for pultruded FRP profiles. Would help, if most of the test could be done at the same test lab.
Polymer Laboratory needed for ASTM Testing: Polymer Testing for Minimum Film Forming Temperature one sample of all acrylic polymer emulsion materials
Materials laboratory needed for ASTM Testing. Plastics Testing to ASTM D256-06 Determining the Izod Pendulum Impact Resistance of Plastics
Plastics materials needed for analytical chemistry testing: deformulation of 1 part hybrid epoxy. Can you tell me the cost ?
US testing laboratories for OECD Biodegradation Testing - specifically Biodegradation of Plastics Testing and other ingredients used in personal care. Looking for labs that currently run OECD 301 and OECD 306. Please advise how long till I am able to receive a response. Thank you!
Polymer Laboratory needed for polymer testing studies and failure analysis study: ECE (R-110 and R-67) requirement testing on several polymers and plastics used in parts we produce. The following tests include: -Compressed natural gas (CNG)/Liquefied petroleum gas (LPG) compatibility, which involves exposing a sample of a given material to pentane at a certain temperature and pressure for a period of time, observing the volume and mass change. -Resistance to dry heat, which involves exposing a sample of a given material to its operating temperature for a period of time, observing the change in tensile strength and elongation -Ozone aging, which involves exposing a sample of a given material to a specific temperature and ozone concentration for a period of time, observing if there is a "cracking" failure mode Thanks!
Materials laboratory needed for polymer testing 1- Tests for colour fastness of surface, according to DIN EN 20105-A02 2- Emission Behavior, according standard VW501 80. 2.1- Fogging PV3015 2.2- Emission of organic compounds according to PV 3341 2.3- Odor test according to PV 3900 3- Lightfastness: Green glazing; 5 periods of exposure according to PV1303.
Plastics Laboratory needed for ASTM Nylon 66 material analysis testing and product in cold chamber at -20C. Faced nylon 66 molded product breakage problem. Used Nylon 66 molding product material analysis testing and product in cold chamber at -20C.
South California Materials Laboratory needed for plastics testing: intrinsic viscosity test needed on plastic resin water bottle gradeIV test on 3 sample of plastic resin in pallet form.
Plastics Laboratory needed for polypropylene testing of 6 samples of PP and I would like them tested for the following characteristics:-
1. MFI (/10 min) 2. Density g/cm3 3. Tensile strength MPa 4. Tensile elongation MPa 5. Fexural modulus Mpa
Please confirm the cost of doing these tests for the 6 samples, and please state how long it takes.
Plastics laboratory needed for validation testing for XLHDPE and LLDPE material used in the manufacture of DEF tanks for Navistar. As described; 1. Soak 10 tensile bars of the LLDPE material (and XLPE material for a baseline) in room temperature DEF solution for 1000 hours (6 weeks), measure the stress strain curves of 10 samples not soaked as well as the 10 soaked samples and compare loss of strength and modulus. Compare the two grades of materials. This will give us an idea if we?re losing properties over time. Evaluate the risk. 2. Perform ASTM D1693 in DEF solution at room temperature instead of Igepal and measure rate of failure for the two materials (current grade and replacement grade). Please respond ASAP.
Mechanical Laboratory needed for mechanical Standard testing for a plastic pallet/skid, including static and dynamic load
Polymer Laboratory needed for plastics Testing of PVC product Identification Testing of PVC
Canada Polymer Laboratory needed for polymer verification for the NCO and OH levels verified in polymers
URGENT: Europe physical materials laboratory needs quotation for the following physical analysis (in accord to PSA B67-7050 specification, look the attachment) done ON THE UV AGING FOAM (after 100 hours of UV Aging). Density D45 1045 Resilience D45 5128 Indentation Hardness (P25/5, P50/5, P65/5) D41 1003 Elongation at break D41 1050 Friction Resistance D451010
It's very important for us to be rapid. Please send us the quotation for accelerate analysis (price + % for rush order). I also really need as soon as possible the waiting time for these analysis.
Materials Lab needed for testing according DIN 30643 (Resistance to wiping and wear of lettering)on a material for identification, a polyester nameplate
University Researcher needs Asia Materials Laboratory for LDPE materials evaluation: TGA analysis on samples of :pure LDPE, solutions formed from solvation of LDPE in benzene (gel-like compounds)
India NABL Accredited Analytical Chemistry Laboratory needed for PET Testing: AA and IV test reports for PET preforms (10 SKUs). Please mail your offer with details."
India mechanical laboratory needed for DIN Testing. Mechanical load testing of mechanical wheel to din 76051 or if any compatible mechanical load test method wheel clocks load testing as per din 76051
India analytical chemistry laboratory needed for distillate testing of distillate made as output(fuel) from plastic. address: Mahatma Gandhi University College of Engineering, Thodupuzha, Idukki, Kerala, India.
Africa materials laboratory needed for plastics testing : plastic migration kinetics with computational and analysis
USA Microbiology Laboratory needed for ASTM biodegradability testing of prototype soy-based polymeric surfactant to assess biodegradability in anaerobic conditions. It will come in form of aqueous solution of dry (whichever will suit your facility)
Asia materials laboratory needed for polymer testing to test the polymer tube samples to analyze the composition of the material and any additives.
Plastics Laboratory needed for physical testing: UV and moisture resistance testing on Black HDPE pails as well as 4 mil polyethylene bags.
Polymer Laboratory needed for UV and moisture resistance testing on Black HDPE pails as well as 4 mil polyethylene bags.
India Plastics Materials Laboratory needed for plastics testing:
1 DOP (DI OCTYL PHTHALATE ) AS PER ATTACHED ANALYSIS REPORT
- SPECIFIC GRAVATY - DENSITY - FLASH POINT - EVOPRATION POINT - FREEZING POINT
SO CAN YOU PLEASE HELP IN THIS CASE ? AND ALSO DO YOU HAVE TEST FACILITY FOR LIQUID STABILIZER , TIO2 , PVC RESIN , LUBRICANT GMS , LUBRICANT 316a, AND CALCIUM UNCOATED ????
JAY PATEL H.O.: 12,4th Floor, Kalapurnam,Near Municipal Market, C. G. Road,Navrangpura, Ahmedabad - 380 009 INDIA Ph. No.: + 91-079-2656 5705 Fax No.:+ 91-079-2656 0522 Mobile : + 91 99099 55546 Email : Inquiry@khushbu.co.in
Europe or USA Materials Laboratory needed for polymer testing: comparative testing of radiopacity ASTM F640Comparative radiopacity to ASTM F640 testing of filled polymers. Specimens consist of injection molded Plastic plates approx 50mm x 80 mm with different wall sections. Possibly tube samples. 5 different materials. No special handling requirements. Samples could be cut.
Canada or USA Polymer Laboratory needed for plastics testing: PET testing for 1. Measuring melt flow index of PET samples 2. Molecular weight evaluation of PET samples using size exclusion chromatography 3. Thermo gravimetric analysis (TGA) on PET samples with analysis of the gaseous products
Accredited Plastics Laboratory needed for PET Testing for intrinsic viscosity of the preform PET. Please let me know whether the method of study is accredited; it is essential eventual report would come from an accredited laboratory. We would like to examine 7 samples taken from 5 preforms and two ready bottles.
Polymer Laboratory needed for ASTM Testing. Polyethylene plastic testing for water vapour permeability of polyethylene plastic sheets , directional reflectance and luminous Transmittance ASTM E96, ASTM E1347, ASTM D 2103
India Polymer Laboratory needed fro uPVC Testing: Certification Testing for uPVC certificates (Pipe 160mm dia, class 5) for advanced vision company-airport project
Polymer laboratory needed for ASTM Testing: Polymer testing of the Liquid Oxygen Compatibilty in a polymer (PTFE)to ASTM D2512 (LOX Mechanical Impact Test)ASTM D4809 (Heat Combustionb TEST) .
Physical Laboratory needed for NORSOK Testing: Physical testing for elastomeric materials Ageing (sour fluid exposures) to NORSOK M-710, Qualification of non-metallic sealing materials and manufacturers RGD resistance
Polymer Laboratory needed for polymer testing: Chromatography Testing to determine the Molecular weight Distribution of PET polymer, 2 samples,
Middle East Manufacturer needs polymer laboratory for ASTM Testing: PVC Tests for mechanical and chemical testing on material of uPVC pipe,according to ASTM D 1785-D 1784 and related fabrication standards. Pipe is class 5 , schedule 80 ,Pipe diameter size is 150mm ,6 inches and (40cm length). Please provide to us the required tests and your quotation asap.
Manufacturer of PVC Conduits Pipes and fittings , needs approved laboratory for materials testing: British Standard tests in the British Standard BS 6099 Part1 , BS 6099 Part 2, section 2.2, BS 4607-1 and BS 4607-5 which incluled following: 1- Dimensions and Visual Inspection 2- Bending Test 3- Compression Test 4- Impact Test 5- Collapse Test 6- Resistannce to Heat 7- Resistance to Burning 8- Electrical Insulating Strength 9- Insulation Resistance
Polymer Laboratory needed for polypropylene testing of polypropylene resin two times per year for test results on melt flow and yellow index. We are looking to verify the test results given to us by our suppliers on their certifications.
Independent, accredited Plastics Laboratory needed for plastics testing: failure analysis of sealant material for failure on site that might be structural silicone, weathering silicone or polyurethane. We are looking for the following:
Confirmation of the material itself. Any analysis of deterioration if it can be compared to a fresh sample.
UK Laboratory needed. Polymer Laboratory needed for Specific Melt Resistivity Testing of polyester film chips to define its conductivity level."
Accredited Polymer laboratory needed for plastic testing of plastic pellets. Gas chromatography testing on a number of extruded tubes and resin granules.
The granules/ tubing are essentially PVC with a number of plasticizers to increase their flexibility for content of DEHP, DEHA and DEHT in the tubing and or granules provided.
Please advise regarding turnaround times, costs, limits of detection, sample requirements etc.
Materials Laboratory needed for rubber testing large quantity of samples of rubber available. We simply need to find out the composition of the rubber we are working with (i.e. is it EPDM, Acm, ect.) We can ship all samples
Polymer Laboratory needed for ASTM Testing: Electrical conductivity testing of some polymer composites to be tested to ASTM D 257 (Electrical conductivity or surface resisitivity of polymer composites) the range is 10-2 to 10-17 S/cm the range is 10-2 to 10-17 S/cm
US Plastics Laboratory needed for plastic ASTM Testing. A full package of information for HDPE material including: 1.Stress-Strain data for (tensile, compression, shear) 2.Strain rate sensitivity parameters identification 3.The graph of strains in lateral and longitudinal directions
Plastics Laboratory needed for carbon black testing for amount of carbon black in rubber hose.
Plastics Laboratory needed for ASTM Testing : Polypropylene resin testing to ASTM D1238,Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer , melt flow rate, melt index, volume flow rate ASTM D6290, Standard Test Method for Color Determination of Plastic Pellets. from lots to compare to supplier information Polypropylene resin, 1 lb. samples to verify melt flow and color (YI)
Materials Laboratory needed for ISO Testing to ISO 354, DETERMINATION OF SOUND ABSORPTION to carried out acoustic test for a material made of recycled PET. Thickness is 9mm and sheet size is 4' x 8'
Plastics Laboratory needed for plastics testing of test Microwave use plastics laminated bags that under 21 CFR 177.1390 (Laminate structures for use at temperatures of 250 deg . F and above) Our microwave steam bag is made of Polyester (outside layer) and Cast Polypropylene (inside layer- food contact) laminated with Polyurethane adhesive.
Petrochemical firm needs middle east plastics materials laboratory for ASTM Testing 2 samples of PET polymer granules to ASTM D5511-02 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditionsor equivalent
USA Polymer Laboratory needed for injection molding of six different polymers injection molded to ASTM D 543, Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents , chemical reagent, dimensional changes, exposure, mechanical property(referencing ASTM D 543, 18.104.22.168 for weight and dimension change). The standard specimens are supposed to be disks that are 2 inches in diameter, 0.125 in thick with a total surface area of 45.60 cm^2. The polymers are HDPE, PET, PP, PVA, PVC, and nylon, and I will need 30 of each (180 total).
Materials Laboratory needed for Toxicology Testing, ASTM Testing, Biodegradability Testing: oxo-biodegradation tests on plastic bags to ASTM-D6954 standard. These bags have been manufactured using an additive.
1. Chemical composition 2. Abiotic degradability 3. Biodegradability in soil 4. Eco-toxicity
West or Northwest USA materials laboratory needed for polymer testing by SIMS or Raman. Need to analyze some defects in a polymer film. Our analysis hasn't been able to isolate any obvious contaminates. Our results just return sample matrix material. I was thinking SIMS or Raman to determine whether material within the defect area is in fact part of the original matrix or is foreign.
Polymer Laboratory needed for polymer testing of composite filling (polymer)by 3D profilometer and vicker microhardness tester.
Materials Laboratory needed for FEDERAL MOTOR VEHICLE SAFETY STANDARDS AND REGULATIONS FMV Flammability Testing to FMVVSS302,
US Polymer Laboratory needed for molecular weight testing by X-ray Photoelectron Spectroscopy (ESCA) Trying to assess approx molecular weight for roughly 3 organic polymer (singly-charged) high mol weight populations on surface of material.
US polymer laboratory needed for Polymer Testing: Small Angle Xray Diffraction. Trying to assess approx MW (very high) for 3 different organic polymer populations on surface of material.
US polymer laboratory needed for spectroscopy testing: tip enhanced raman spectroscopy TERStwo (2) samples to compare; trying to assess approx high mol weights of 3 different organic polymer populations on surface of material
Polymer Laboratory needed for polymer testing of PE film with trace amount of additive. Could you identify the additive?Any spectroscopy or thermal analysis may be working?
Materials Laboratory needed for DIN Testing of Rubber Closed Cell Elastomeric Thermal Insulation in Tube and Sheet Form to DIN 4102-1, DIN 1988/7, DIN 4109, Closed Cell Content Test, etc.
US Materials Laboratory needed for ASTM Testing to ASTM D648: Need Heat Deflection Testing of 1/8' to 1/4' diameter foam rod
Materials Laboratory needed for plastics testing: identification of few ppm of additive in poly(ethylene) film from none additive PE film? I tried the subtraction of spectra, but failed to identify the material because too small amount of additive.
Plastics Laboratory needed for SAE polymer testing of Fluoro polymer to SAE AMS 2491 Rev E.Surface Treatment of Polytetrafluoroethylene (PTFE), Preparation for Bonding
Plastics manufacturer needs environmental toxicology laboratory for plastics toxicology testing of manufacturer's UPVC Pipes (certification testing) which are used in a variety of ground applications.
Manufacturer of Fiber reinforced plastic products like tanks, vessels, scrubbers etc. needs plastics laboratory for ASTM Testing: the coupon testing in mumbai as per our specified astm standards as mention below 1) Flexural Strength & Flexural modules- ASTM D 790 2) Tensile Modules - ASTM D 5063 3) Peel test & Lap shear test for dual laminate - BS 4994
ISO Middle East plastics laboratory needed for polymer testing: thermal conductivity of polymer coating 1-4 mm thickness.
Oregon plastics laboratory needed for polymer testing: crosslinking of acrylaminde polymer sheet.
India or UAE materials laboratory needed for ASTM Testing (Thermal Conductivity Testing ) for Thermal Insulation foam samples to ASTM C518: 3 No.Measuring range 0.001 to 0.1 W/m.k
Materials Laboratory needed for ASTM Testing: Thermal Conductivity Test as per ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus.
Insulation Material is : 25MM thick, foam density of 25 kg/m3, Closed Cell, Cross linked Polyolefin Foam with factory fused pure reinforced Aluminum Foil and acrylic double sided adhesive.
My test parameters are at mean temperature of 23 deg C and ambient humidity of 50%.
Plastics Laboratory needed for ASTM Testing: Darmstadt Pipe Tilting Jig Test)on pipe pvc pipe liners:DIN 19565 200,000 cycles. High Pressure Cleaning Resistance: DIN 19523 Thermal Movement:EN 1055 Heat Deflection Temperature (ASTM D648 Method A Izod Impact Value (ASTM D256 Method A)
Plastics Laboratory needed for plastics testing: Basic plastics tensile testing of plastic chain lengths approximately 1 metre long. Anticipated tensile less that 8000lbs. Multiple samples to establish Average Ultimate Strength. no special handling required.
USA GLP Toxicology Laboratory needed for GLP OECD Toxicology Testing. Biopolymer Testing. 1 sample (more to follow) of a bio-polymer (DfE criteria set as chelant) to be tested for data used in an independent review for CleanGredients. Test must be inhalation (not oral). Please provide quote for: OECD 422, 421, and 412.
ILAC certified Asia mechanical laboratory needed for Mechanical testing as per : as per MS2086(BS EN1746, or BS3212 requirement)is accreditated.
Canada materials laboratory needed for physical Testing of lighting for physical and optical properties: Hardness, specific gravity, tensile strength, tensile elongation, flexural modulus, melt index, impact strengthOptical: transmission loss, refractive index, numerical aperture
Asia Plastics Laboratory needed for Plastics Testing to BS EN1746: EMSD gas authority not allow due to MS2086 which is equivalent to BS EN1746 is not listed in accreditation list although we product certification license.
NABL India Laboratory needed for raw material and coating pipe testing of fusion bond for accreditation purpose . fusion bond epoxy, polyethylene,polypropylene
India Materials Laboratory needed for ASTM Standard Testing for Physical properties of Flurosilicone and silicone. Properties are Heat aging, low temperature brittleness, Fuel test.
India Plastics Laboratory needed for glass testing: fiber orientation of the injected molded component of material N66 composed of 65% polyamdie ,35%Glass fill.
Canada or USA Plastics Materials Laboratory needed for Ford / SAE J2302 thermal effectiveness testing. BMW/SAE 2302 thermal effectiveness testing. Need testing on wire harness tapes.
India Accredited Environmental Laboratory needed for ISO 14855 for bio-degradation testing to ISO 14855, Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions Method by analysis of evolved carbon dioxide Part 1: General method
India, Karnataka, Bangalore plastics laboratory needed for plastics testing of polythene covers bags. we need to test our biodegradbale plastic polythene bag
Saudi Arabia Plastics laboratory needed for ASTM Testing: MELT FLOW INDEX OF HDPE & PP 5 SAMPLES
Materials Laboratory needed for rubber testing: Thermal Conductivity of a 13 Ply Rubberised canvas belt at your facility. If yes, please inform the charges for the same with lead time and sample size you required for the same.
Asia plastics laboratory needed for plastics testing: Oxygen Transmission Rate (OTR) for plastic film Laminate plastic film
Plastics Laboratory needed for ASTM Testing: creep analysis for a plastic material per ASTM D2990, Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics.
USA physical laboratory needed for flammability testing to UL 94 Standard for Safety of Flammability of Plastic Materials for Parts in Devices and Appliances testing. 5VA and V-0 at 2.5 mm, V-0 at 1/16"
Asia and India plastics laboratory needed for Delta Y of Purified Terephtaliec Acid 2-3 samples of PTA, Required test named as delta Y .
India Polymer Laboratory needed for chromatography testing : Liquid polymer composition alalysis Gel permeation chromatography
Europe Materials Laboratory needed for plastics testing: Determination of the coefficient of thermal expansion (TMA - ISO 11359; or dilatometry) -40ºC to +80ºC
Polymer Laboratory needed for polymer testing of polymer membranes for fuel cell research, and are looking for an analytical lab to measure proton conductivity of membranes. The polymers are organic/inorganic materials.
Plastics Laboratory needed for polyester testing. Determination of nitrogen and /or sulfur content in the range of 0.1ppm up to approx. 10ppm Sample is a thermoplastic polyester (solid at RT)
Plastics Laboratory needed for polymer testing to determine the molecular weight and polydispersity index of an insoluble polymer (insoluble in commonly used organic and aqueous solutions)
Plastics Laboratory needed for ASTM Testing, ISO Testing and DIN Testing of 25 kg capacity Plastic bag which used for packing polypropylene or polyetheylene pellets inside the bag to be tested for its fitness
Rubber manufacturer exporting rubber products to Europe needs rubber testing of rubber mat for electrical resistance testing to: EN 13501-1/DIN 4102 B1, BS 921 and ISO 1853. Please inform us the possibility of doing this test in your laboratory and offer us your most favorable quotation for the test.
Plastics laboratory needed to test water vapour transmission rate and oxygen transmission rate in some flexible films. I have 16 samples to test it.
USA Plastics Laboratory needed for plastics testing. Test Acetaldehyde in Bottle grade resin for PET manufacturer. We are looking for a third party to independently test our resin.
UAE Materials Laboratory needed for ASTM Testing: Properties of Polyethylene:- Brittleness Temperature - as per ASTM D 746 Dielectric breakdown voltage as per - ASTM D 149
Materials Laboratory needed for polymer testing of 20% talc filled PP. New color is brittle. I want to see if degradation occur and compare the microstructure. I was thinking of Molecular weight and distribution and dynamic rheometry but not sure. could you please suggest the best method for this reason?
Materials laboratory needed for ASTM Testing mechanical testing to ASTM D638 Standard Test Method for Tensile Properties of Plastics. biaxial plaanr fatigue of composite materials, mo of samples:12 (almost)
India polymer laboratory needed for polymer synthesis required for 6 new novel bio-monomers plus polymer fundamental properties testing and polymer testing their ability to be used in PU, PE and PC's. Fundamental physical properties - mol weight, crosslinking, strength
India polymer laboratory needed for polymer testing: WVTR and OTR 1 water vapor transmission rate (for polymer) Standards WVTR test for polymer standards/conditions - 1 - IS: 1060 part-2 , 1960; 90 % RH gradient and 38 degree c. 2 - ASTM F 1249 - 06; 90 % RH gradient . OTR test standards/conditions - ASTM F 1434 ; 65% RH 27 degree c. ASTM F 1927-07 ; 65% RH 27 degree c.
USA Food Laboratory needed for ANSI 51 Testing. NSF/ANSF 51 (National Sanitation Foundation - Food Equipment Materials
Chennai Plastics Laboratory needed for PVC Testing: UV light exposure weathering testing for a PVC material
Asia Materials Laboratory needed for ASTM Testing to ASTM 6954 - Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation comprises three Tiers of testing; oxidation, biodegradation and ecotoxicity. Tier 1- The determination of molecular weight (MW) of HDPE containing ReverteT exposed to a combination of UV and elevated temperature demonstrates that ReverteT for High Density Polyethylene significantly accelerates the rate of oxidation, Tier 2 - The degree of biodegradation is determined using the oxidised material compliant with Tier 1. The oxidised HDPE material, above, has been shown to mineralise under aerobic conditions when tested to ASTM D5338-98 Standard Test Method for Determining Aerobic Biodegradation of Plastics Materials Under Controlled Composting Condit
India POLYMER LABORATORY NEEDED FOR BIS TESTING FOR BIS APPROVED POLYCARBONATE SHEET TESTING
Product Safety Laboratory needed for OECD Testing, OECD Marine biodegradability testing to Organisation for Economic Co-operation and Development OECD 306, Biodegradability in Seawater
Ireland Materials Science Laboratory needed for IEEE testing : Polymer Testing, Differential Scanning Calorimetry, or similar. To test for changes in Crystalininty in an amorphous polymer due to forced degradation studies
Physical Laboratory needed for ASTM Testing to ASTM C1147 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics. Tensile testing of 95 pieces of welded cpvp and pvc.
Middle East Materials Laboratory needed for ASTM polymer testing: self ignition temperature test of polyresin material (acrylic material) according to ASTM-D1929, Standard Test Method for Determining Ignition Temperature of Plastics
address: Dubai, UAE
Plastics Laboratory needed for PVC compound testing to determine the Flammability temperature ( or Temperature Index) follow to BS ISO 4589-3 Plastics-Determination of burning behaviour by oxygen index
USA Plastics Laboratory needed for MALS Polymer Testing for measuring Intrinsic Viscosity and Molecular Weight of various polymers of hyaluronic acid formulations. Preferabley using MALS or other suitable/validated methodology.
Asia Materials Laboratory needed for ASTM Testing: Flammability testing to ASTM E 1354 of natural composite reinforced polymer testing
India Plastics Laboratory needed for plastics testing of plastic sheets
address: Karachi Pakistan
India Plastics Laboratory needed for polymer testing: mechanical properties of polymer film (thin) % elongation and tensile testing of oplymer films, five samples of films. Please send the film size and thickness information.
Plastics Laboratory needed for DIN Testing or ASTM Testing for properties of polyisocynate
NCO Content, Non-volatile content Viscosity at 23°C Iodine color value Free TDI monomer, Equivalent weight Flash point approx. 5°C Density at 20°C
US Analytical Chemistry Contract Synthesis laboratory needed for organic chemistry synthesis: Esterification of a long chain alcohol (C7 to C10) to acrylic acid. Need 1 kilogram."
Plastics Laboratory needed for Polymer Testing, ASTM Testing to ASTM D6068, Standard Test Method for Determining J-R Curves of Plastic Materials
Packaging Laboratory needed for packaging testing: UN FIBC Flexible Intermediate Bulk Container bags.
Plastics Laboratory needed for analytical chemistry testing for chemical residue left by the laundry facility after washing
USA A2LA Laboratory needed for GC analytical chemsitry testing of two polyurethane-nylon fabric laminates materials tested using GC to measure the following substances: 1) Methylenediphenyl diisocyanate (MDI) down to 1 ppb 2) Bisphenol A down to 1 ppm 3) Nonylphenol down to 1 ppm. The product may be used to transport beverages (milk) and the customer wants to ensure that these SOCs are not present in the polyurethane film.
Materials Laboratory needed for ASTM Testing: Saybolt color analysis by ASTM 6045 method of our Polyethylene wax sample. If it is possible at your end then please let me know the analytical charges and how much sample is required for the same.
Acoustics and Plastics Laboratory needed for JIS testing to the standards methods below of a bonded plastic sheet with a tissue layer with 2mm of total thickness. * JIS K 6850 - Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies * JIS K 6854-3 - Adhesives - Determination of peel strength of bonded assemblies - Part 3: Adhesives -180? peel test for flexible-to-flexible bonded assemblies (T-peel test) * JIS A 1416 - Acoustics - Method for laboratory measurement of airborne sound insulation of building elements * JIS K 7215 - Testing Methods for Durometer Hardness of Plastics * JIS L 1096 - Testing methods for woven and knitted fabrics * JIS A 1405 - 1 - Acoustics - Determination f sound absorption coefficient and impedance in impedance tubes - Part 1: Method using standing wave ratio * JIS A 1405 -
Plastics Laboratory needed for rubber testing: lab test compressive stress relaxation of rubber. There are two test conditions. One is in 150'C air for 1008 hours, the other one is in 150'C SF 105 fluid for 1008 hours.
West Coast USA Plastics Analytical Chemistry Laboratory needed for Flakes Contamination Testing for: PVC, PETG, Polyamide. Need to know if testing can be done on recyled bottle flakes for contamination Identification purposes. Contaminants in question are PETG, polyamide, polycarbonate, labels and polystyrene. Reason for identifying this contaminant is to determine if they contribute to higher Benzene ppm on the final product.
Europe Materials Laboratory needed for ASTM testing as per ASTM D5511 : ASTM D5511 - 11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
Europe Toxicology Laboratory needed for Acute toxicology studies for Daphnia similis and chronic toxicology testing for Ceriodaphnis dubia in wastewater.
Europe FDA product safety laboratory needed for USDA Acceptance Testing: (United States Department of Agriculture) Reference: 21 CFR 177.1550
Materials Laboratory needed for Optical Measurement Testing. Reflectivity value of plastic material solid surface, in visible spectrum
Plastic curtains and screens manufacturer that needs Optical Laboratory for AWS testing to AWS standard F2.3 determine how much light is passing through a welding curtain. The relevant standard is AWS standard F2.3. The test will require a spectrophotometer capable of reading transmittance from 200nm to 800nm. We need 2 to 5 samples tested."
USA plastics laboratory needed for ASTM Testing to identify a plastic pellet on an extruder screen.
USA Plastics laboratory needed for materials testing to EN 1598 to test 13 oz PVC material to EN1598 for blockout out properties for use as welding curtain material.
Plastics Laboratory needed for ISO or ASTM Testing: polyethylene testing for Oligomer Content in Polyethylene Terephthalate (PET) chips using either HPLC, MAE or Soxhlet extraction technique.
Electrical Laboratory needed for DIN Testing: Dielectric strength testing, Dielectric dissipation factor (tanä) testing , Volume resistivity testing, Surface resistivity testing, Dielectric constant testing
Middle East Polymer Laboratory needed for polymer testing: GPC-IR analysis on LLDPE (ethylene 1-hexene copolymers) samples to have the following results: (1) Average molecular weight, (ii) Molecular weight distribution, and (iii) Side chain branching (SCB) distribution as a function of molecular weight. We appreciate if you could let us know the analysis cost per one(1), sample, cost per five(5) samples, and cost per ten(10) samples.
Europe, Japan, Korea, India Plastics Laboratory for PET Testing: Determination of P, S,Ag in PET polyester chips powder with XRf by Lucas-Tooth calibration method.
USA Plastics Materials Laboratory needed for plastics testing: Contact angle on a curved surface Oxygen Transmission 4 samples +/-2
Plastics Physical laboratory needed for DIN Testing of PVC membrane to DIN 53370,DIN53455,DIN53454,DIN53363,DIN16726,DIN53495,DIN50014
Plastics Laboratory needed for PVC film testing: IMDG 22.214.171.124.1.2 test on rigid pvc film
Las Vegas Polymer Laboratory needed for quality control testing of resin pellets contents. quality control under 10 samples
Nevada Polymer Laboratory needed for resin testing on resin pellets to determine the content. we would like to use a company in Las Vegas or nearby.
US Plastics Laboratory needed for ASTM Testing: physical properties of a plastic resin tensile, elgongation, yield, flex modulus, melt index, impact - izod preferred charpy okay, hardness (shore A) SAMPLES NEED TO BE MOLDED
Polymer Laboratory needed for polymers testing: Softening point & brookfiled viscosity at 120 deg C of polymer
India Polymer Laboratory needed for PET Testing, intrinsic viscocity of pet lab testing
India Materials Laboratory needed for ASTM Polymer Testing, FTIR & TGA, of polymer for development
Plastics Laboratory needed for ASTM Testing, biodegradation testing to ASTM 5338 for 10 samples of polypropylene containing an additive which should facilitate their biodegradation.
Plastics Laboratory needed for Quality COntrol Testing, acrylic testing of acrylic used for the see-through tank wall of a new shark tank to be installed within a new world class aquarium under construction in the Salt Lake City area. The manufacturer is a Chinese firm providing their own quality control testing data. We would like to obtain indpendent testing results of some key material parameters to verify. We can provide samples of their acrylic. The parameters to be tested are: KEY PARAMETERS - STRENGTH, CHEMICAL RESISTANCE, CLARITY Density (D792) Modulus of Elasticity (D790) Tensile Strength (D638) Flexoral Strength (D790) Elongation at Break (D638) Impact Strength - Izod and Charpy (D256) Coefficient of Thermal Conductivity (C177) Deflection Temperature (D648) Softening Point - Venig (D1525) Coefficient of linear the
USA EPA ENVIRONMENTAL TOXICOLOGY LABORATORY NEEDED FOR TOXILOGY RISK ASSESSMENT OF POLYVINYL ACETATE EMULSION
East Coast USA Analytical Chemistry Laboratory needed for Polyethylene testing: Dilute Solution Viscosity (0.02% at 135C) of UHMW-PE for determination of Intrinsic Viscosity. Number of Samples TBD.
West Coast USA or Pacific Northwest Polymer Laboratory needed for ASTM Testing to ASTM D4603. Viscometry for PET plastic 3 samples per week. Plastic PET preforms for intrinsic viscosity testing. Rapid turnaround is critical.
Government needs India Materials Laboratory for materials testing of materials used for fiberglass boats, which are currently being used.
Europe Mechanical Laboratory needed for GMW Air induction duct durability testing to GMW15143
USA or Canada Physical Laboratory needed for water repellancy testing for WATER REPELLENT TREATMENTS Compliance to Standards listed in testing requirements below.
There will be three samples of products provided.
Malaysia Physical Polymer Laboratory needed for Durability Testing for Durability Dropping Impact - Dropping Impact Mass : 25kg -Input Load,F1 : 6kN ( Adjust the dropping height to achieve F1 ) -Room temperature : 20+/- 10degree C -Qty samples : 2 pcs -To measure spring characteristics and amount of permanent set in fatigue before,after test and target cycles
West Coast USA Mechanical Laboratory needed for Mechanical Strain Testing planar biaxial strain testing of thin film polymer specimens submerged in a saline solution. We are looking for the in-plane strain found through non-contact optical methods and the associated forces. There are about five different thin film membranes, each to be tested an appropriate sample-significant number of times.
USA Polymer Laboratory needed for polypropylene contaminant testing for percentage of polypropylene contaminant within a base HDPE material. 4 samples
Polymer Laboratory needed for polymer testing: thermal conductivity of polymer matrix composites and polymers? If so, 1. What kind of tests do you perform (guarded hotplate, flash diffusivity, etc)? 1. What is the price per specimen 2. What is the turn-around time? 3. What are specimen dimensions?
Polymer Laboratory needed for ASTM Residual Testing: ASTM F 2013-10, Polymer residual testing in process samples and fabricated items.ASTM F 2013-10, Residual Acetaldehyde in PET by Static HS-GC-FID. We are seeking a back-up lab to handle sample overflow.
Polymer Laboratory needed for Plasticiser content testing in sample PA 11 tube of size 12x9 product in 12x 9 size. Due to crack issue we intend to check the plasticizer in the raw material granules.This is further extruded in the tube form extrusion process.Material and Tube validation data of the above grade as per DIN73378 & DIN74324 Can you help us to check plasticizer content.Pl send us quotation of time/cost and sample required to do so,
Due to crack issue we intend to check the plasticizer in the raw material granules.
This is further extruded in the tube form extrusion process.
Material and Tube validation data of the above grade as per DIN73378 & DIN74324
Can you help us to check plasticizer content.
Pl send us quotation of time/cost and sample required to do so,
Europe Polymer Laboratory needed for hydrosoluble polymer testing. 5-10 samples
Determination of Mn, Mw, Mp by SEC-UV-RI-MALS or A4F-UV-RI-MALS.
Canada or US Physical Laboratory needed for OECD Testing, Resin Testing to OECD 117 testing for one sample
USA Physical Laboratory needed for polymer testing at low temperature. stress-strain testing of polymers at -150C to establish stress-strain curve at low temperature -150C
India ISO Physical Laboratory needed for ISO acceptance testing of 1.1 kv 2.5sqmm pvc insulated 2rbice connection cablec Al se Acceptance Test
India, Asia Materials Laboratory needed for ASTM Testing: 1) Heat Transmission coefficient 2) Rigidity - ASTM C393 3) Elongation - ASTM D638 4) Deflection Temperature under load - ASTM D648 5) Coefficient of Linear Thermal expansion : ASTM D696 6) Impact resistance - ASTM D732 7) Toxicity : should be within acceptable, TCLP 8) Colour change at 80degC : No visible change 9) Delamination at 80deg C : No delamination 10) Bending strength : ASTM D747 11) Sound Reduction : 27Db
ELECTRICAL LABORATORY NEEDED FOR IEC TESTING OF ELECTRICAL TAPES TO IEC93 AND 250JOINTS IEC 60502-4 AND IEC 1442 FOR PERMITIVITY, DISSIPATION FACTOR, SURFACE AND VOLUME REISTIVITY. ELECTRICAL JOINT COMPLIANCE TESTING.
INDIA PLASTICS LABORATORY NEEDED FOR MATERIALS TESTING OF PLASTIC COMPONENT TO VERIFY WHICH IS MATERIAL AS WELL AS MATERIAL DEFINATION AS PER INDIA MARKET. REGARDS KOTEKAR
USA Plastics and Polymers Laboratory needed for Hydrolytic Stability Testing of Polurethane
India Plastics Laboratory needed for plastics testing of 2,2(1,2-ethenediyidi-4,1-phenylene bisbenzoxazole% for CaCO3% testing ,Al2O3% testing,Bulk density testing ,fineness testing
Plastics Laboratory needed for Mylar film testing for ultra-violet and visible light transmission using a spectrophotometer, or similar device.
Asia, Middle East, India Materials Laboratory needed for Plastic Jerrycan testing for UN number approval
India Materials Laboratory needed for ASTM Testing to determine the chemical and physical properieties of PTFE
Plastics and Polymers Laboratory needed for ASTM Testing to measure melt flow rate for epoxy according to ASTM 1238-10 or ISO1133.
USA Mechanical laboratory needed for AASHTO Testing joint to AASHTO M326-08 specification for HDPE liner pipe
Middle east Mechanical Laboratory needed for ASTM Testing to ASTM D3039, Tensile test & modulus of GRP laminates testing
Materials Laboratory needed for ASTM Testing Oxo-Biodegradable plastics testing to ASTM D 6954-04
Southern USA materials laboratory needed for high temperature GPC testing of polymer molecular weight and molecular weight distribution by GPC. There are 3 samples need to be tested. Please give us a quote on potential cost for the tests. Please note that the polymer has high molecular weight (Mn=60KDa).
India Plastics and Polymers Weathering Laboratory needed for Weathering testing for Plastic films (Humidity: 10% to 90 %) followed by tear strength.
Saudi Arabia plastics laboratory needed for plastics identification testing to identify the materials included and the percentage
Plastics Laboratory needed for analytical chemistry testing of polyethylene flame retardent concentrate (pellets) that have a make up of decabromomodiphenyl oxide & antimony trioxide and need to know the % of each
Polymer Laboratory needed for polymer testing of PET Chips imported from China (FOB Tianjin or Shanghai) 400MT per month of PET (CR-8828 - carbonated drinks) to Brazil.
Please let me know how you can help us to verify this final product before the shipment!
Large Multinational Corporation needs Canada Materials Laboratory for ASTM Flexural Modulus testing to ASTM D790 as -40°C 1 sample 5 specimens
India Polymer Laboratory needed for rubber testing for rubber compound percentage test
Europe Materials Laboratory needed for ASTM Testing: thermal conductivity measurement services to ASTM C-1461 or ASTM E1530 for fiber reinforced (glass or carbon fiber) polymer composite materials. (Number of samples: various number of samples will be measured through year 2012)
UK Plastics Laboratory needed for PET Bottle grade Flakes testing- IV,color value, Moisture content, other plastics, PVC etc"
Plastics and Polymers Laboratory needed for plastic testing of plastic part to 21CFR177.2410
Israel Physical Laboratory needed for ASTM Testing: Burst Strength and peel strength test of plastic lidding film to tray to ASTM F1140 ASTM F2824-10 ASTM F2054
India materials laboratory needed for Polyurethane testing of tubes Parameters / Evaluation 1.Hydraulic pressure test @ 50 deg c for 1 hr (Pressure to be applied 10 bar then examine for bulging, elongation, and change in colour). 2.Bursting Pressure ( Pressure to be applied till it burst). No of samples: 2
India Materials laboratory needed for ASTM Testing for Comparative Tracking Index [CTI] for polyester film to ASTM D-3638-93
Materials laboratory needed for thermal polyrethane testing for termical linear expansion in polyurethane resin, using standard DIN 53752.
Materials laboratory needed for 21CFR177.1500 and 1520 Testing. Need test pricing and turn-around time.
California analytical chemistry laboratory neeeded for deformulation testing for ingredients, percentage ratio, best service at best price
Canada Plastics Laboratory needed for ASTM, BS, CS, BS, AS, DIN LDPE Testing for Mechanical properties of LDPE lay flat tube; Tube stretch limit Tensile and tear strength in both direction (N/50mm, N), operating pressure (m of water) Sample; one piece of 120cm tube
Mechanical Laboratory needed for Instron Strength testing to Identify the compression resistance range for six EVA foam products.
Plastics Laboratory needed for ISO Testing on multiaxial Impact on plastic materials to ISO 6603-2; 5samples
Analytical Chemistry Plastics Laboratory needed for deformulation testing of Injection-Molded Part - What Polymer is it made of? Does it Contain any additives - UV or Slip Agents?, Any inorganic additives like talc or foam, etc. ?
USA materials laboratory needed for ongoing residual testing to Quantitate RESIDUAL D3-D20 Cyclics to the ppm level in Silicone samples on an ongoing basis
Large Chemical Company needs Texas physical laboratory for ASTM Testing and ISO Testing of polypropylene PP pellets specimens: Izod Impact, 23C Notched with Procedure A, ASTM D4101 Izod impact, Notched @ 23degC ASTM D256 Izod impact, Notched @ 23degC ISO 180 Izod impact, Notched @ -40degC ISO 180 Charpy Impact, Notched @ 23degC ISO 179 Flex Modulus, 2mm/min, 64 mm span ISO 178 Flexural Modulus at 23 C ASTM D4101 Flexural Modulus, Tangent, 1.33 mm/min, Method 1 ASTM D790 Tensile Strength, Yield @ 50 mm/min ISO R527 Tensile Strength, Yield @ 50 mm/min, Type 1 bar ASTM D638 Tensile Stress @ Yield ASTM D4101 Elongation @ Yield ASTM D4101 Elongation, Yield @ 50 mm/min ISO R527 DTUL, @ 0.45 MPa (455 kPa) ISO 75 DTUL, @ 0.45 MPa (455 kPa) ASTM D648 DTUL, @ 1.82 MPa (1820 kPa)
New Jersey Plastics Laboratory needed for ASTM Testing: ASTM D1238Melt Index Test of LDPE 8 samples to be tested
Petrochemical Company needs Middle East microbiology laboratory to determine silver amount in TiO/Ag nanopawder as antibacterial additive to PET( polyethylene terephthalate) polyester materials and then determine silver amount in PET final product. The amount of silver may be around 0.5 to 4 wt% in nanopowder and around 10 to 40 ppm in final Pet polyester. samples by XRF, please inform us to discuss about cost and so on.
Polymer Laboratory needed for GPC analysis of co-polymer of MMA and mpeg-maa(molecular range is 5000-150000)
Analytical Chemistry Laboratory needed forchemical testing on Nylon? how much would it cost for two 20x20x23mm cubes?
USA Polymer Laboratory needed for ASTM Testing ASTM D1159-98 Electrometric titration of 10 samples for bromine number. These are polymers in a solution of cyclohexane. The bromine number is quite low - 2 to 0.12. Can you differentiate between 0.24 and 0.12 bromine numbers?
Canada laboratory needed for similarity test on two pieces of rubber to see if they are the same material
Materials laboratory needed to measure gas diffusion coefficient in polymer melt High temperature (120 deg C)
Plastics Laboratory need for polymer testing of Rubber to determine polymer percentage, oil and wax percentage, Moisture percentage, Carbon percentage and other fillers percentage content in it? kindly send us your quotation.
Physical Laboratory needed for ASTM analysis: linear thermal expansion coefficient test according to ASTM E831 on rubber sample? The test condition is -30°C to 30°C. We will provide the vulcanized rubber samples.
Toxicology Laboratory needed for toxicity testing on new chemicals to prepare MSDS. Please let me know how to get the quote or send the sample for the test
Saudi Arabia Plastics Laboratory needed for chemical composition testing of Globes (around 10 Pcs) that we need to know thier chemical composition i.e. plastics materials content in them.
Middle East Materials Laboratory needed for analysis for Cation and Anion resins. Kindly send the details of required quantity and other details with duration 1. Total exchange capacity meq/ml 2. Salt splitting capacity meq/ml 3.Water regain g/g 4.Contamination 5.Appearance 6.Bead Integrity % (i) Whole perfect % (ii) Whole cracked % (iii) Broken % 7.Density gm/ml
Physical Plastics Laboratory needed for IEC Testing: IEC 60695-11-10 Horizontal burn test Testing of PP using the horizontal burn test
Plastics Laboratory needed for polymer(plastic) testing of HDPE pellets for density, melt index is of the sample we will send. Also if the sample has any PP in it.
Materials Laboratory needed for measuring the refractive index of a film. The film is solid and is composed of a polymeric material. The refractive index determined will be use in future measurements by a customer who wants to know thickness of a film with identical composition
Plastics Laboratory needed for analysis to determine the percentage of mix in a sample of a plastic bag? We need to know the mix between HDPE and LLDPE.
Europe mechancial and materials laboratory needed for ASTM TEsting RTV silicone testing to ASTM 412a and ASTM 624c: 1. tensile test (ASTM412a), 30 samples 2. tear strength test (ASTM624c), 30 samples 3. scanning electromicrossope (SEM), 5 samples 4. accelarated whether aging, 90 samples 5. coloring capability 30 samples 6. peel Bond Strength, 30 samples 7. Water absorption 8. Filter diffusion test 9. patch test for allergic reaction
ISO Ireland Materials Laboratory needed for ASTM Testing for Thermal conductivity testing on flexible polyurethane foam
India Acoustics, Plastics Laboratory needed for Sound Transmission Loss Testing for Polymer
Canada Packaging Laboratory needed for COF, ink adhesion and corona tests. We are flexible packaging film producer.
Europe plastics laboratory needed for REACH Compliance Testing for Determination, quantification and identification of monomer or any other substance in a polymer/copolymer.
USA Electrical Laboratory needed for UL Testing. the electrical testing we need are: - Long term insulation resistance in water, as described in UL 44, par. 5.4 issued July 2005 Immersion in water up to 90°C - Capacitance and relative permittivity, as described in UL 1582, par. 1020 issued October 2001. Immersion in water up to 90°C
India plastics laboratory needed for vapour proofing( permeability) property testing of Non wovwn Polymer cloth in India.
Canada or USA TSCA GLP Environmental Toxicology Laboratory needed for EPA OPPTS Testing: EPA OPPTS 850.1075 (Fish), OPPTS 850.1010 (Daphnia), OPPTS 850.5400 (Algae Tier I and Tier II) Biodegradation OECD 209 (Activated Sludge Testing)
Materials Laboratory needed to Measure the contact angle of water with varying concentrations of surfactant on several plastics/polymers
Physical Laboratory needed for ISO 8256 Tensile impact strength testing of notched specimens at +23ºC
Canada or USA Polymer Laboratory needed for testing 5 films to be measured for oxygen transmission rate (OTR) with Mocon, water vapor transmission rate with Ca test, and coefficient of thermal expansion in the temperature range of -10 to 140 C. The value should be around 5-40 ppm/K.
UK Plastics Laboratory needed for durability testing of thermoplastic TPE-U and TPE-V polymer materials against the chemical and microbial degradation. And to see which if any cause the the degradation of the material.
ISO Mumbai Plastics Laboratory needed for ASTM Testing, Basic material ingredient testing, Physical & Chemical tests for Nylon Grade plastic material.
Materials laboratory needed for reverse engineering to deformulate a PU film to know all each components and how was it treated. We will have 2 samples
India NABL Electrical Laboratory needed for IEC Testing of Silicon Rubber insulators 120KN & 160KN in NABL Approved Laboratory
Eastern USA Materials Laboratory needed for ASTM Testing: ASTM G 155, ASTM B 117,ASTM D 1037, RCRA-CDO NOT KNOW SPECIFICS AT THIS TIME
Coating and Paint Mfg needs materials certification laboratory for test certifications for our thermal insulation coatings, which we are manufacturing.
USA Plastics and Polymers Laboratory needed for Mossbauer Spectroscopy analysis of Fe in recycled automobile tires materials."
Middle East Physical Laboratory needed for Recycled PET Flake Physical Test Suite: Flake size (mm) Moisture content (%) Moisture Variation (%/hr) Intrinsic Viscosity (dl/g) Bulk Density (kg/m3) Melt Temperature (degree C) PVC content (ppm) Glue content (ppm) Aluminium content (ppm) Paper content (ppm) HDPE content (ppm) PP content (ppm) Total Polymer foreign particles content (ppm) Coloured PET flake content (ppm) PET dest content (%) pH of flake
Plastics and Polymers Laboratory needed for physical testing of polyester bands of width 5 to 10 cm and resistance in traction from 50 to 100 kN according to the width. These bands will be used as reinforcement of ground for the realization of the retaining walls. It is the European standard 94-270 which treats this type of realization. In term of safety coefficient partial of creep, the standard failing this leaves the choice between a coefficient of 0.33 (for polyester), rather pessimistic and a partner of test to justify the true coefficient. It is precisely the realization of these creep tests in all conformity to the standard 94-270 which is the object of our request. May you establish us an estimate for these required tests (standard and number, etc). We can send you a photograph illustrating the bande.
USA Microbiology Laboratory needed for anti-viral efficacy testing by direct innoculation of plastic substrate with Rhinovirus to determine the anti-viral efficacy over 0-12 hours.
Northeast USA ISO 9001 analytical chemistry laboratory needed for ASTM Water Testing: Total organic carbon analysis of organic residue in water to ASTM D4839
Australia Physical Laboratory needed for Specific Heat and thermal conductivity testing of HDPE over temperature range of 0C to 250C
INDIA MATERIALS LABORATORY NEEDED FOR AAS TESTING FOR IDENTIFICATION OF PLASTIC MATERIALS
Malaysia Physical Laboratory needed for testing gas permeability of clear polymers. Samples approx 1mm to 3mm thick.
Analytical Chemistry Laboratory needed for testing a plastic sample made of LDPE to see what other additives are present (when heated it at 365F° the sample bonds to an aluminum plate).
Hong Kong ANSI Materials Laboratory needed for plastic sink wear test as per ANSI Z124.3-1995 clause 5.3
USA ASTM Analytical Chemistry Laboratory needed for Plastic Film Density Test(OPP)as per ASTM D1505-10.
IS Electrical Laboratory needed for testing Electrical Insulation Material as per IS-15652, results testing on our product and confirmed
Florida/Ohio Materials Laboratory needed for verification and optimization of components for a UV cured polymer with organic crystals.
Canada packaging laboratory needed for lightfastness test for water based inks printed on tyvek material
India Analytical Chemistry Laboratory needed for acrylic polymer testing for co-monomer identification and quntitative analysis of a given polymer powder sample. 2. molecular weight analysis of a given polymer powder sample.
Middle East Materials Laboratory needed for plastics testing green house film (Agricultural film).
India Analytical Chemistry Laboratory needed for Acrylic Polymer testing: 1. Co-monomer identification and 2. Molecular weight analysis
Scotland, UK ASTM Physical Laboratory needed for Brittleness Temperature Testing of PP Foam Tester Kit as per ASTM D 746-07 in order to determine the temperature at which the material fails under specific impact conditions.
Plastics Laboratory needed for ASTM and ISO materials testing elastomer mixing, tensile tests, rheometrics, rubber process analysis, research and development
Polymer Laboratory needed for polymer reformulation of polymer solution involving butyl rubber in suspension. Have the basic "recipe" from a deformulation process. Need expert guidance in formulating and manufacturing."
WA/West Coast USA FDA GMP Consumer Products Safety Laboratory needed for FDA testing plastic mugs to meet FDA requirements. The mugs made of polypropylene and acrlonitrile styrene.
ASTM ISO DIN Analytical Chemistry Laboratory needed for deformulation of coextruded Film -layer by layer (totally three layers)
Mumbai India ASTM Packaging Laboratory needed for testing: 1. Density ASTM D7922 2. Ash content 3. MFI (230deg /2.I 6kg) ASTM D1238 4. Moisture KARL-FISHER 5. Izod impact ASTM D256A 6. Tensile Strength ASTM D638 7. Flexural Modulus ASTM D790 8. Vicat Softening Point ASTM D648 9. HDT@4.5Kg/cmI\2 ASTM D648 10. Elongation @ break @ 23deg C 11. ESCR - ASTM D1693 12 Spectro
Europe EP Analytical Chemistry Laboratory needed for testing hexane extractables in polyethylene according to EP European Pharmacopoeia.
INDIA, BARODA, GUJARAT ASTM/ISO Analytical Chemistry Laboratory needed for material identity testing on 3 samples, sample is unknown to us, it is plastic / rubber sample-We need the perfect information of the material composition, so that we can duplicate the material.
Analytical Chemistry Laboratory needed for molecular weight testing: nylon 6/6 molecular weight and molecular weight distribution test.
Europe - Greece Physical Laboratory needed for testing to determine viscosity vs. shear rate for a wood plastic composite formulation. This will require capillary and torque rheometry. Also want determination of storage modulus and loss modulus by parallel plate rheometry.
Polymer Materials Laboratory needed for Gel Permeability Chromatography, Molecular Weight testing of polypropylene composites need to check the molecular weight, it is not soluble in the THF nor toluene since it contained PP. Understood that Polypropylene is soluble in hot xylene.Maybe can suggest other method to test for the molecular weight - like parallel plate rheometer for relative molecular weight.
ASTM Electrical Laboratory needed to measure the following electrical properties in HDPE: 1. Dielectric constant and dissipation factor (@ 1 Hz), according to ASTM D 1531 2. DC Volume Resistivity (@ 23°C), according to ASTM D 257 3. Dielectric Strength in 125 mils (3.175 mm) short time (S/T), according to ASTM D 149
Materials Laboratory needed for MSDS plastics testing to establish MSDS Sheet for liquid rubber composite derived from our companies patented process.
Asia Plastics and Polymers Laboratory needed for compatibility testing for CPVC sch 80 materials compatibility to 98% H2SO4.
Ohio Materials Laboratory needed for ANSI Testing: ANSI 26.1 test groups 4, 5, & 12 under "rigid plastics" for glazed materials used in the automotive industry. Samples are simple platic hardcoated plaques.
India ISO Materials Laboratory needed for polymer testing poly house sheets for green house - 1) U.V.stabilized film should block U.V. Radiations below 380 nanometer of PAR light. Poly film should have good thermic effect more than 60%. Films should have properties like anti-drip, anti- fog, anti-dust, light diffusion capacity above 50% etc. The minimum thickness of the poly film will be 200micron. The poly film should have ISO certification and conform to ISI specifications. required..U.V. stabilization and should have more than 70% transmittance during the first two years and not less than 65% during the entire life of the poly films.
Europe Analytical Food Laboratory needed to do OML & SML tests for CPP-Cast Polypropylene-films that meet European directive 2002/72/EC
BRAZIL MECHANICAL LABORATORY NEEDED FOR TESTING "ELASTOSYL R401/40 CONTROL 33932HO" FOR TENSILE STRENGTH.
USA materials laboratory needed for IEC testing of a solvent based epoxy/poymamide, IEC 60664 Type 1 twp part solvent based epoxy/polyamide conformal coating of mine who wishes it or their assembly tested to this spec.
Physical/Mechanical Laboratory needed for physical testing Vicat softening temperature testing, Melt flow rate testing and tensile properties of thermoplastics pipes.
Europe ANSI/ESD Materials Laboratory needed for ANSI/ESD testing of polyurethane foam for the following parameters: Volume resistivity ANSI/ESD S20.20 / ANSI/ESD S541 Surface resistivity ANSI/ESD S20.20 / ANSI/ESD S541 Static decay rate ANSI/ESD S20.20 / ANSI/ESD S541
NJ, PA Mechanical Laboratory needed for Impact Testing of modified Poly Methyl Methacrylate (PMMA) samples.
Materials Laboratory needed for four separate ISO/DIN testing of plastic fold and form lining system (Am-Liner II). They are Type Testing (TT), Batch Release Testing (BRT), Process Verification Testing (PVT) and Audit Testing (AT)as follows: Chemical resistance tests determined by: ISO 175:1999 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals (PH range 1 to 10) . ISO 178:2001 for sample dimension and preparation. The following test standards shall be used to determine the Abrasion resistance of the lining system: - Darmstadt abrasion test (Darmstadt pipe tilting jig) in accordance with material specific requirements (e.g. for GRP based products DIN 19565, Part 1): 200,000 load cycles to be performed. The following test standards shall be used to determine the high pressure jet cleaning resi
Northeast US ISO, FDA GLP Mechanical Laboratory needed for ASTM Testing, mechanical testing of UHMWPE Fibers, incl.density, tensile strength, tensile modulus and elongation at break.
Electrical Laboratory needed for ANSI Testing polyurethane flexible foam to ANSI ESD S20.20 standard.
ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR IDENTITY TESTING PLASTIC BAG FOR CONTENT.
Brazil or China ISO 17025 or A2LA Physical Laboratory needed for thermal gravimetric testing of rubberone hour at 105C followed by two hours at 200C in Nitrogen report weight loss after each hour of testing
UK Analytical Chemistry Laboratory needed for testing for traces of animal product for High Density Polyethylene for type of HDPE.
Analytical Chemistry Laboratory needed for Out-Gas Testing of Solid Polyethylene Foam at Room Temp, 15% Above, 25% Above using GC-MS.
Canada (<40km from Burnaby) Rheological Laboratory needed for ODR Rheometer testing on Liquid Silicone Rubber to produce results and graph torque vs. time as the rubber cures to a full state of cure. Test must be done in an enclosed area of fixed dimensions so that the sample is tested under pressure.
Manufacturer of plastic curtains and screens that are used as safety welding screens in industrial environments needs Optical Laboratory to perform testing to determine how much light is passing through a welding curtain. The relevant standard is AWS standard F2.3. The test will require a spectrophotometer capable of reading transmittance from 200nm to 800nm. We need 2 to 5 samples tested.
China Optical Laboratory needed for Light Transmittance, Haze, Yellowness Index, and Ultra-Violet Light Absorption Testing on Greenhouse HDPE Tarps.
CHINA ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR: COATING THICKNESS TEST NICKEL FREE TEST RAW MATERIALS LEAD AND TOXIC ELEMENT TEST
CHINA MATERIALS LABORATORY NEEDED FOR TESTING HDPE TARP FOR: LIGHT TRANSMISSION TEST UV STABILITY TEST
WEST COAST USA PHYSICAL LABORATORY NEEDED FOR HARDNESS DESCRIPTION TESTING OF DELRIN PLASTIC PART IN ROCKWELL M SCALE
Chicago, Illinois Physical Laboratory needed to test moisture content of 20 mil PMMA film in the range of 0.19% to 0.50% moisture content.
USA Analytical Chemistry Laboratory needed for testing as per TRGS 552 for N-Nitrosodimethylamine, N-nitrosodiethylamine, N-nitrosomorpholine, N-nitrosopiperidine, N-nitrosomethylphenylamine, N-nitrosoethylephenylamine, N-nitrosodiethanolamin, N-nitrosodiisopropylamin, Nitrosodipropylamin, N-nitrosomethylethylamin and N-nitrosopyrrolodin.
Analytical Chemistry Laboratory needed for Elution Testing on Polyethylene and Polypropylene
Saudi Arabia ISO Analytical Chemistry Laboratory nee ASTM Testing: anti oxidents content in thermoplastic pipe used to convey hot and cold water. Number of samples-3
West Coast USA Physical Laboratory needed for polymer testing, melt flow analysis of a polymer.
Large Chemical Manufacturer needs Analytical Chemistry Laboratory for GPC Molecular Weight testing of a MAH-grafted-polyethylene.
China ASTM Materials Laboratory needed for High Temp Nylon and HDT test as per ASTM D 648 - Equipment must be capable to heated up to 320 deg c+
USA/EUROPE FDA Materials Laboratory needed to conduct testing on PET polymer bottles as follows: 1)Crystallinity 2)Intrinsic viscosity 3)Moisture content 4) UV barrier 5)Acetaldehyde
California Packaging Laboratory needed for seal testing to validate the seal of the metalized plastic foil bag. seal time of one second and cooling time of 3 seconds but I am not sure if receipe is making the seal to protect the vacuum insulation panel.
South East Asia/Japan ASTM Materials Laboratory needed for testing Plastic Material in accordance to ASTM D1308.
Canada or Eastern USA FDA Analytical Chemistry Laboratory needed to test 1 sample of a plastic lid for BPA
Ontario, Canada Mechanical Laboratory needed to conduct dynamic mechanical testing on a rubbery polymer to determine the glass transition temperature. The DMTA must be cooled with liquid nitrogen in order to reach the low temperatures required (Tg = 150 K)
Physical Laboratory needed for off-gassing testing when heated to 300-400º F on Ten mil polystyrene sheet.
ASTM Analytical Chemistry Laboratory needed to perform isocyanate titration as per ASTM D5155.
USA GLP Environmental Laboratory need for biodegradation testing of 2-3 polymers by ISO 14855 or ASTM D6400.
India ASTM/DIN Materials/Mechanical Laboratory needed for plastic material identification testing, filler contents, Density, tensile strength, Elongation, Melt Index, ShoreD hardness, ash content, recycled material content, flexural compressive strength.
ISO Materials Laboratory needed for testing plastic parts on pilot ladders as per ISO 877:1994.
ASTM Environmental Laboratory needed to test Polystyrene cutlery with pro-degradant additive. Tests required are ASTM D5511 and ASTM D5526.
Analytical Chemistry Laboratory needed for performing Phthalates test for PVC on 3 samples.
Physical Laboratory needed to perform thermal cycle test for plastic component having outer diameter 178 mm. D.Thermal Cycle [80 deg C for 4 hours, -40 deg C for 1 hour, 100cycles].
Materials Laboratory needed for PS materials testing to be done as follows: Bosch Norm N38A SQ1.2: -salt -spray test, norm N42AP 102, clasif #1 -cold test, norm N42AP 214 clasif #13 -splashing water test, norm N42AP 030 clasif. 24/1 - immersion in 5 701 040 000 , 20hrs, 20°C, clasif 40.
Mumbai India Physical Laboratory needed for odor testing for Nylon(as per MS300-34-Min 3 grade)
Europe Materials Laboratory needed for testing polymer samples for antioxidant measurement. Unfortunately we don't not know which antioxidant were used and need therefore to find a lab that has good experience with antioxidant measurement (and a good GC-MS library, and calibrated equipment for a wide range of antioxidants.
Large Pharma needs US Analytical Chemistry Laboratory for deformulating a polymer used in semisolid product.
UAE ISO/ASTM Environmental Laboratory needed for testing plastics for biodegradability as per ISO standards.
Physical Laboratory needed to measure density of powder polymers. Please advise cost and how many grams of the sample is needed.
OECD/ASTM Environmental Laboratory needed for plastic biodegradability testing as per OECD 311 (ASTM E2170), second most common is ASTM D5511
and EPA metals and soil analysis tests. The tests commonly done on biodegradation-test residues (e.g. ASTM D6400) are metals content (EPA heavy metals list) and a plant toxicity test (modified OECD 208).
ASTM Microbiology Laboratory needed for testing as per ASTM G 21 - fungal resistance test method.
ASTM Packaging Laboratory needed to perform Soot Accumulation test as per ASTM D2741 on 24 polypropolene lids and 16 polypropolene cups.
Asia FDA Laboratory needed for testing PVC/PVdC according to the method of US FDA: CFR 175.300.
Materials Laboratory needed for DIN/EN/BS Physical Testing, plastics testing: 1) no emission of noxious fumes or leachates as a result of fire to DIN VDE 0482-267. 2) Light transmittance to EN 1794-2 Annex F or DIN 5036. 3) Specular Gloss Values for non-glaring panel to BS 2782 Part 5 Method 520A or ISO 2813.
India FDA GMP Laboratory needed for ASTM Testing, Biodegradability Testing Plastic Biodegradable Additive to ASTM 5511D 2.
Analytical Chemistry Laboratory needed for inductively coupled plasma(ICP) mass spectroscopy testing, and X-ray fluorescence testing on plastic samples.
Environmental Laboratory needed to perform bio-degradability and plastic shelf-life testing
Asia/Australia Analytical Chemistry Laboratory needed for molecular weight testing using polymerGel Permeation Chromatography
Mechanical Laboratory needed for thermal shock testing of spas, fast turnaround time on 4 samples
India ASTM Physical Laboratory needed to test Brittleness temperature of plastics by impact as per ASTM D 746
ISO/IEC Laboratory needed for testing of plastic electronic identification cards, e.g., ATM cards, Credit Cards, etc in accordance to IEC 7810. The critical parameter to be tested is the Peel Strength of the Magnetic Band.
Canada/USA ASTM Environmental Laboratory needed to test biodegradable plastic bags for their degrading ability. Bags are used for portable toilets to contain human waste.
India/USA ASHRAE Laboratory needed to test Diffuser for Air throw, Noise level, Air Output etc. as per ASHRAE standards
India Physical Laboratory needed to test 19 mm thick Polyethylene foam for thermal conductivity in accordance to ASTM C518 or IS 3346.
India Physical Laboratory needed for IS thermal conductivity testing for expanded polystyrene sample
Hong Kong Analytical Chemistry Laboratory needed for GPC molecular weight analysis of silicone polymers
Materials Laboratory needed for analysis of Flame Retardant Poly Sheeting product in accordance to NFPA 701 (Test Method 2)
INDIA ASTM MATERIALS LABORATORY NEEDED FOR THERMAL CONDUCTIVITY TESTING OF XPS FOAM IN ACCORDANCE TO ASTM.
Europe Physical Laboratory needed to do thermal analysis by DSC on three kinds of thermoplastic materials-are interested in the decomposition temperatures of the three materials.
Asia Packaging Laboratory needed for: 1)Poly Carbonate Compatability Test 2)Charge Generation 3) Static Decay, 4) Surface Resistance
India Materials Laboratory needed for brittleness temperature test at minus-70 degree centigrade on HDPE granules in accordance to astm 746.
Analytical Chemistry Laboratory needed to analyze 5 or 6 samples of PVC powder feedstock. We are plastic extruders of rigid PVC fence profiles and are interested in finding out the qualitative and, if possible, the quantitative amounts of materials that make up the compound. There are about 8 different ingredients in the formulation, both organic and inorganic.
India Analytical Chemistry/Mechanical/Physical Laboratories needed for characterization of polymer of starch derivatives using: 1.DSC Differential scanning calorimetric 2.TGA Thermogravimetric analysis 3.TMA Thermomechanical analysis 4.DMTA Dynamic Mechanical thermal analysis 5.OIT Oxidative induction time 6.MFI Melt flow index,Melt flow rate (MFR) Melt indes (MI),Flow rate ratio (FRR) 7.NMR 8.FTIR 9.Morphology study 9.1 TEM Transmission electron microscopy 9.2 SEM Scanning electron microscopy 9.3 SPM Scanning electron microscopy 10.Elemental and structural characterization 10.1 AAS Atomic absorption spectroscopy 10.2 ICPAES Inductively coupled plasma atomic emission spectroscopy 10.3 IC - Ion chromatography 10.4 ISE Ion selective electrode 11. Mass spectroscopy 12. Viscometry
USA Analytical Chemistry Laboratory needed for analysis using GPC columns for two SEBS (styrene-ethylene-butylene-styrene)block copolymers of average 400,000 MW to find the Mw/Mn calibrated against PS standard. The copolymer is soluble in THF or toluene.
Microbiology Laboratory needed for testing plastic caps used for drinking bottles. Need the caps tested for Standard Plate Count, Coliforms, Yeast & Mold.
USA Analytical Chemistry Laboratory needed for EPA testing using GLP aqueous GPC : 1. need analytical method to detect polymer (AMW 5000) in water with varying levels of CaCO3 2. need pre&post treatment samples analyzed
Houston, TX Toxicology Laboratory needed for testing PVC, polystyrene, polycarbonates.
USA Physical Laboratory needed for TMA testing using penetration probe to study thermal characteristics over temp range RT to 150C on polymer film materials, ten samples.
Physical Laboratory needed for water vapor transmission of paint and plastic film, thermal conductivity and shrinkage of glass reinforced plastics testing.
Pakistan Analytical Chemistry Laboratory needed to analyze chemistry of insoluble organic polymers.
Environmental Laboratory needed to perform biodegradation testing on a plastic sample to fulfill requirement listed in European Directive 94/62 EC.
Physical Laboratory needed to do pressure filter value testing for color master batches based on polymers like PP, PE, LLDPE etc.
Materials Laboratory needed for ASTM Polyurethane waterproofing membrane testing in accordance to ASTM.
Mumbai- India Bioanalytical Laboratory required to test plastic disposable 100 ml medical containers 50,000 units every month
Bioanalytical Laboratory required for testing and certification of presterilized plastic bags with EVA film used to store cell culture media (an aquious solution). Need testing for extractables. Please let us know if you do the testing and can you certify. Please let us know the cost involved.
Physical Laboratory required for testing plastic film for DSC, Seal curves, Hot tack, Composition analysis, FTIR, Clarity, Haze, Tensile,COF
ASTM Laboratory required for testing packaging plastic bag according to ASTM D6954 to see if it is considered oxo-degradable.
USA FDA GMP analytical chemistry laboratory needed for method development and validation for polymer analysis by GPC. Also please include a quote for the cost of each GPC analysis. Please reply asap. Thank you.
California Materials Laboratory needed for accelerated testing on scent on plastic film will last six months. I can't wait the six months for the test results. I need to be able to determine in a one to two week test if the scent will last at least six month on the film.
Dubai, Middle East Product Safety Laboratory required to test our 20/25 Ltr jerry cans made in UAE and get the UN certification.
USA Materials Laboratory required for ASTM testing to ASTM C67 - Section 8, ASTM C67 - Section 9, ASTM C140-03 - Section 6, ASTM C140-03 - Section 7, ASTM C1028-06, ASTM C1028-07, ASTM D2394-05E1 ASTM E108-007
Microbiology Laboratory needed for bacteria testing of PVC film. Need to test for bacteria on inside of film as well as outside.
INDIA FDA GMP MATERIALS LABORATORY NEEDED FOR PERMEATION TESTINF ON PTFE SAMPLE WITH HELIUM AND WATER VAPOUR
New Zealand Plastics and Polymers Materials Laboratory needed for testing Thermoformer film approved for boil in the bag application being reheated during microwaving of product by customers. Need testing to show if cooking instructions are followed, that film does not exceed 100oC at any site on the packaging. Also need to know at what temperature during microwaving, that blistering of packaging may occur and migration of plastic components to product.
Analytical Chemistry Laboratory needed for TGA testing of polymer samples for the amount of carbon black in a thermoplastic elastomer. So was expecting to need both N2 and air to be used during the TGA. Please let me know if you have this capability and what additional information is required for a quote.
India Weathering Laboratory needed for weathering testing or printed self adhesive vinyls pasted on polycarbonate sheets tested for outdoor weathering - to see at what point in time the fading starts