Top

Welcome!

NEED A LABORATORY?

Save time and money searching! Find a Lab for all your laboratory testing and scientific research.

Submit Laboratory Test Request

ARE YOU A LABORATORY?

Gain new business by registering your laboratory.

Register Laboratories

HAVE QUESTIONS?

Call us 24/7 1-855-377-6821 or send us an email.

Incoming Packaging and Labeling,Plastics,Polymers Laboratory Test Requests

Contract Laboratory has received the following Packaging and Labeling,Plastics,Polymers Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Packaging and Labeling,Plastics,Polymers Laboratories to perform their Packaging and Labeling,Plastics,Polymers Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Packaging and Labeling,Plastics,Polymers laboratory that would like more information on these Packaging and Labeling,Plastics,Polymers projects, please visit our registration page or call toll us free 1-855-377-6821.

Below are our 25 most recent Packaging and Labeling,Plastics,Polymers laboratory test requests. Please log in to see more.

16-01653

Packaging and Labeling,Plastics,Polymers

Packaging laboratory needed for melt flow index MFI testing for hdpe resin used in the manufacture of plastic crates. 20 samples

Closed

16-01628

Packaging and Labeling,Plastics,Polymers

LONG-TERM TESTING Brewery needs packaging laboratory to outsource their HDPE resin analysis used in producing plastic plastic crates for bottles. Melt Flow Index (MFI) analyser for HDPE resin.

Closed

16-01508

Packaging and Labeling,Plastics,Polymers

Packaging Laboratory needed for Child resistant packaging testing on resealable mylar bag.

Closed

16-01400

Packaging and Labeling,Plastics,Polymers

Materials Laboratory needed for BHT free testing Solvent Extraction/ analysis by GC-MS of LLDPE Stretch Wrap film. Please send quotation and accreditation scope available.

Closed

16-01399

Packaging and Labeling,Plastics,Polymers

Accredited Food Laboratory needed for extractables and migration testing of Food grade (LLDPE Cling) film testing to U.S. FDA CFR 21 177.1520 clauses (c ) (2.1) Extractable fraction in n-hexanes
Extractable fraction in xylene and FDA Migration on PE (Density; Melting point; n-hexane extractives or Xylene extractives) U.S. FDA CFR 21 177.1520 clauses (c ) (2.1)

Cling plastic is intended for food wrapping application for contact with aqueous & fatty foods.

We seek your service to test our product under following standards.
Please send a quotation and accreditation scope available for below test standards.

Closed

16-01309

Packaging and Labeling,Plastics,Polymers

LONG-TERM TESTING Large corporation needs microbiology laboratory for Measuring Anti-Algae and Antibacterial efficacy of plastics composites compound.

Closed

16-01296

Packaging and Labeling,Plastics,Polymers

Materials Laboratory needed for Testing for plastics testing of LDPE / HDPE plastic bags:
1. Oxygen Transmission Rate (OTR)
2. Water Vapor Trasmission Rate (WVTR)

Closed

16-01243

Packaging and Labeling,Plastics,Polymers

Materials laboratory needed for plastics testing of corrugated polypropylene layerpad. abrasion test in accordance to DIN 53754 TESTING OF PLASTICS; DETERMINATION OF ABRASION, ABRASIVE DISK METHOD.

Closed

16-01173

Packaging and Labeling,Plastics,Polymers

Polymer Laboratory needed for TEM for Determining the difference in crystalline in plastic parts with different colorants using TEM

Closed

16-00872

Packaging and Labeling,Plastics,Polymers

Large company needs laboratory for water testing for purity

Closed

16-00850

Packaging and Labeling,Plastics,Polymers

Large consumer products company needs CPCB authorized materials laboratory for Plastic (Multi Layer Packaging) recyclability testing

Closed

16-00787

Packaging and Labeling,Plastics,Polymers

Packaging company needs plastics laboratory need Melt Flow Index and Density Testing of HDPE.

Closed

16-00654

Packaging and Labeling,Plastics,Polymers

India NABL approved testing labs needed for testing flexible packaging and printed laminates

Closed

03-0034

Packaging and Labeling,Plastics,Polymers

Canada Consumer Product Safety Textiles laboratory needed for DIN4102(B1) certification in Canada or near by.

Closed

03-0033

Packaging and Labeling,Plastics,Polymers

Heavy metals testing and FDA extraction testing on printed & folded coupons. (USA)

Closed

03-0032

Packaging and Labeling,Plastics,Polymers

USA toxicology Laboratory needed for skin irritation/sensitisation testing to ISO 10993-10 on polythene film samples. (UK)

Closed

03-0031

Packaging and Labeling,Plastics,Polymers

Pharmaceutical Laboratory needed for Residual Moisture Content analysis (e.g. Karl-Fisher analysis ) on lyophilized cake. All excipients in the formulation safely handled under BL 1 conditions. Fast Turn Around Times a must. Laboratory should be in the contiguous United States.

Closed

03-0030

Packaging and Labeling,Plastics,Polymers

Pharmaceutical Laboratory needed for Osmolality measurements on reconsituted lyophilized formulation. All excipients in the formulation safely handled under BL 1 conditions. Fast Turn Around Times a must. Laboratory should be in the contiguous United States.

Closed

03-0028

Packaging and Labeling,Plastics,Polymers

Bioanalytical Laboratory needed for Vitamin detection on Fetal Bovine Serum. Following is a list of vitamins and detectable units:
Vitamin B-12 pg/mL
Folic Acid ng/mL
Vitamin B-6 ng/mL
Thiamin B-1 ng/mL
Niacin ug/mL
Vitamin H Biotin pg/mL
Riboflavin B2 ng/mL
Vitamin A Retinol ng/mL
Vitamin C ng/mL
A-Tocopherol ug/mL
Carotene ug/mL

Closed

03-0027

Packaging and Labeling,Plastics,Polymers

ENvironmental microbiology laboratory needed for environmental mold issues

Closed

03-0025

Packaging and Labeling,Plastics,Polymers

Microbiology Laboratory needed for Minimum Inhibitory concentration (MIC) determination ,using dilution method

Closed

03-0024

Packaging and Labeling,Plastics,Polymers

Microbiology Laboratory needed for disinfectant efficacy testing

Closed

03-0023

Packaging and Labeling,Plastics,Polymers

EPA GLP certified ENvironmental Laboratory needed that is familiar with EPA tests in LA county

Closed

03-0021

Packaging and Labeling,Plastics,Polymers

ISO Toxicology laboratory needed for In-vitro Toxicology Studies: Cyto-toxicity test to ISO 10993-5

Closed

03-0020

Packaging and Labeling,Plastics,Polymers

Preclinical Laboratory needed for antiviral assay on coronaviruses using our pharmaceutical product(s)

Closed

03-0018

Packaging and Labeling,Plastics,Polymers

Contract Service Preclinical Laboratory to perform an IND enabling FDA GLP toxicology study

Closed

03-0017

Packaging and Labeling,Plastics,Polymers

Consumer Testing for identity testing of capsules

Closed

03-0016

Packaging and Labeling,Plastics,Polymers

Preclinical Contract Research Organization needed for Periodic platelet testing in rats

Closed

03-0015

Packaging and Labeling,Plastics,Polymers

Clinical Contract Research Organization needed for clinical blood testing of rifampin levels in pediatric patients' blood

Closed

03-0012

Packaging and Labeling,Plastics,Polymers

Microbiology Laboratory needed for microbial analysis SB 3112. The test material consisted of only the bacterial spores at a count of 55 x 107 cfu/ml. The tests were run in compliance with the following protocols: 1 USEPA FIFRA;GLP Standards 40 CFR 160 2 USEPA TSCA 40 CFR 792 3 Org. Economic Coop. and Dev. Principles of GLP, Annex 2, C(97)186 4 Japan Ministry of Ag, Forestry & Fisheries, Notification No. 59 Noshan 3850, Director-General of Agricultural Prod. Bureau, 10 Aug 84

Closed

03-0011

Packaging and Labeling,Plastics,Polymers

Analytical Chemistry Laboratory needed for solvent gas chromatography testing of three solvent samples for assay analysis on GC ASAP. Product is very pure ethly lactate.

Closed

03-0010

Packaging and Labeling,Plastics,Polymers

FDA Extraction Test on furnished litho printed coupon paper. Also to do heavy metals testing onfurnished litho inks

Closed

03-0009

Packaging and Labeling,Plastics,Polymers

bioanalytical laboratory needed for bioanalytical testing done on a drug call serostim (hgh)

Closed

03-0007

Packaging and Labeling,Plastics,Polymers

Preclinical toxicology laboratory needed for Cytotoxicity studies: MEM Elution Sample Amount: 120 cm2 or 4 grams Irritation: Intracutaneous Reactivity (ISO) (w/2 extracts) Sample Amount: 240 cm2 or 8 grams Sensitization: Magnusson-Kligman (w/2 extracts) Sample Amount 600 cm2 or 32 grams (6 samples minimum) Sensitization: Local Lymph Node Assay: Sample Amount 400 cm2 or 20 grams

Closed

03-0006

Packaging and Labeling,Plastics,Polymers

Micrbiology Laboratory needed for Microbial Barrier Properties Analysis on Packaging Material

Closed

03-0005

Packaging and Labeling,Plastics,Polymers

Dietary SUpplement Mfg needs FDA analytical chemistry laboratory that can extract herbs supplied by my company of up to 25 times concentration (25:1)

Closed

03-0004

Packaging and Labeling,Plastics,Polymers

University needs Wisconsin Microbiology laboratory TOC (Total Organic Carbon) testing for water analysis on water samples

Closed

03-0002

Packaging and Labeling,Plastics,Polymers

Microbiology Laboratory needed for Microbiology Analysis (Total Plate Count, Yeast, Mold, E. Coli, Salmonella) for 78 Raw Materials

Closed

Submit Packaging and Labeling,Plastics,Polymers Testing Requests for Packaging and Labeling,Plastics,Polymers testing and Packaging and Labeling,Plastics,Polymers Scientific Research