Top

Incoming Packaging and Labeling Laboratory Test Requests

Contract Laboratory has received the following Packaging and Labeling Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Packaging and Labeling Laboratories to perform their Packaging and Labeling Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Packaging and Labeling laboratory that would like more information on these Packaging and Labeling projects, please visit our registration page or call toll us free 1-855-377-6821.

Below are our 50 most recent Packaging and Labeling laboratory test requests. Please log in to see more.

16-01662

Packaging and Labeling

Environmental toxicology laboratory needed for EPA California Proposition 65 testing for VOC in cardboard paper by CG/MS and or LC-MS .

Closed

16-01653

Packaging and Labeling

Packaging laboratory needed for melt flow index MFI testing for hdpe resin used in the manufacture of plastic crates. 20 samples

Closed

16-01632

Packaging and Labeling

Food Repackager needs microbiology laboratory for fruit, vegetable and environmental testing: : APC, Coliform and Ecoli - Food sample and environmental. Listeria species - environmental Listeria Mono - food sample. Right now I am just trying to get some pricing so a rough quote will be fine.

Closed

16-01628

Packaging and Labeling

LONG-TERM TESTING Brewery needs packaging laboratory to outsource their HDPE resin analysis used in producing plastic plastic crates for bottles. Melt Flow Index (MFI) analyser for HDPE resin.

Closed

16-01614

Packaging and Labeling

Packaging Laboratory needed for vibration testing an automotive pallet load to ensure returnable packaging will hold up
pack ships for automotive manufacturing industry.
size of pallet load 48x45x53h
total weight 1050lbs
4 layers per pallet load
will the bottom layer hold up

Closed

16-01581

Packaging and Labeling

Accredited laboratory needed for electrical paperboard testing for compliance for type B3.1A of IEC 60641-3, Standard | Pressboard and presspaper for electrical purposes

Closed

16-01578

Packaging and Labeling

Packaging Laboratory needed for Burst Strength Testing of Corrugated Cardboards.

Closed

16-01562

Packaging and Labeling

Toxicology laboratory needed for toxicity testing of plastic casing of Pool cleaner. Please specify pricing and tests.

Closed

16-01551

Packaging and Labeling

Pharmaceutical company needs packaging laboratory for special packaging of three different types of bottles to 16CFR 1700.20, Testing procedure for special packaging

Closed

16-01550

Packaging and Labeling

Materials Laboratory needed for ASTM Testing of linens to ASTM F739-99a/12e1 Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact of chemotherapy drugs

Closed

16-01508

Packaging and Labeling

Packaging Laboratory needed for Child resistant packaging testing on resealable mylar bag.

Closed

16-01491

Packaging and Labeling

Packaging Laboratory needed for packaging certification testing as Child Resistant according to 16 CFR 1700.20, Testing procedure for special packaging.

Closed

16-01460

Packaging and Labeling

Company needs Laboratory to conduct study of recyclability of PET kegs. and conformance testing to ensure keg conform to all recyclables mandates. Please specify cost and how long the study will take?

Closed

16-01454

Packaging and Labeling

Pharmaceutical packaging laboratory needed for packaging testing of containers to USP 671 Containers?Performance Testing for light transmission requirements

Closed

16-01448

Packaging and Labeling

e-liquid company needs packaging laboratory for packaging teting of glass and LDPE Plastic bottles to Title 16, Part 1700.20, Testing procedure for special packaging.We have glass and plastic bottles. Our plastic bottles are LDPE. We have 3 different caps and 12 bottle sizes.

Closed

16-01400

Packaging and Labeling

Materials Laboratory needed for BHT free testing Solvent Extraction/ analysis by GC-MS of LLDPE Stretch Wrap film. Please send quotation and accreditation scope available.

Closed

16-01399

Packaging and Labeling

Accredited Food Laboratory needed for extractables and migration testing of Food grade (LLDPE Cling) film testing to U.S. FDA CFR 21 177.1520 clauses (c ) (2.1) Extractable fraction in n-hexanes
Extractable fraction in xylene and FDA Migration on PE (Density; Melting point; n-hexane extractives or Xylene extractives) U.S. FDA CFR 21 177.1520 clauses (c ) (2.1)

Cling plastic is intended for food wrapping application for contact with aqueous & fatty foods.

We seek your service to test our product under following standards.
Please send a quotation and accreditation scope available for below test standards.

Closed

16-01363

Packaging and Labeling

FDA Packaging Laboratory needed for FDA Packaging testing of coated paperboard according to the Microwave Heat Susceptor Packaging section of the 2007 FDA chemistry guidance http://www.fda.gov/Food/GuidanceRegulation/GuidanceDocumentsRegulatoryInformation/IngredientsAdditivesGRASPackaging/ucm081818.htm#aii11c

Closed

16-01329

Packaging and Labeling

Packaging Laboratory needed for certification testing: Child Resistant Packaging Testing for a child resistant trigger sprayer and bottle

Closed

16-01311

Packaging and Labeling

URGENT Packaging laboratory needed for child-resistant package certification testing of Packaging used for single use edibles, mylar bag, open pouch, heat sealed needing scissors to open.

We need to move forward as quickly as possible as we have several large pending orders that are now being held up .

Closed

16-01309

Packaging and Labeling

LONG-TERM TESTING Large corporation needs microbiology laboratory for Measuring Anti-Algae and Antibacterial efficacy of plastics composites compound.

Closed

16-01296

Packaging and Labeling

Materials Laboratory needed for Testing for plastics testing of LDPE / HDPE plastic bags:
1. Oxygen Transmission Rate (OTR)
2. Water Vapor Trasmission Rate (WVTR)

Closed

16-01295

Packaging and Labeling

Food laboratory needed for food packaging testing of packaged consumer food products for a measurement in parts per million of lead and/or an analysis of lead consumption per package or serving . Please let us know the approximate cost and turn time.

Closed

16-01290

Packaging and Labeling

ISO/IC Packaging Laboratory needed for child-resistant packaging testing to testing method 16 CFR 1700.20,Testing procedure for special packaging

Closed

16-01276

Packaging and Labeling

Materials Laboratory needed for ASTM Testing: Weathering Testing to ASTM G-154 , QUV Exposure testing on 40 - 50 samples 4 X 4# each, 3,000 hours

Closed

16-01247

Packaging and Labeling

Large corporation needs materials laboratory for physical testing: Peel adhesions in cold temperatures. 90° and 180° peels on various substrates. We would supply test substrates.

Closed

16-01243

Packaging and Labeling

Materials laboratory needed for plastics testing of corrugated polypropylene layerpad. abrasion test in accordance to DIN 53754 TESTING OF PLASTICS; DETERMINATION OF ABRASION, ABRASIVE DISK METHOD.

Closed

16-01236

Packaging and Labeling

Consumer Products Laboratory needed for ASCM (?) and the US Product Safety Commission testing child safety consumer panel testing of plastic grocery bag with locking mechanism that prevents children five and under from entering it. The bag also needs to be tested on adults to see if the can open and close it.

Closed

16-01193

Packaging and Labeling

Contract Research Laboratory needed for Product development and Prototyping of an adhesive application/device in high temperature edible oil environment that meets specific performance objectives including time release which can be discussed under NDA.

Closed

16-01173

Packaging and Labeling

Polymer Laboratory needed for TEM for Determining the difference in crystalline in plastic parts with different colorants using TEM

Closed

16-01157

Packaging and Labeling

Packaging laboratory needed for ASTM transportation testing for the new medical device packaging box according to ASTM D4169-09 as per below: Please help to quote the test as below, Distribution Cycle 13, Assurance Level III. Test sequence as below: 1. Temperature and Humidity Conditioning 2. Schedule A: Handling 3. Schedule C: Vehicle Stacking 4. Schedule F: Loose-load vibration 5. Schedule I: Low Pressure 6. Schedule E: Vehicle Vibration 7. Schedule J: Concentrated Impact 8. Schedule A: Handling

Closed

16-01136

Packaging and Labeling

Electrical laboratory needed for ASTM shock pulse testing : 100 vertical half sine 10G, 11 msec shock pulses on a 6' x 4' crate weighing 2000 lb

Closed

16-01132

Packaging and Labeling

Physical laboratory needed chair testing to test structural welding on a metal chair

Closed

16-01116

Packaging and Labeling

Food analytical chemistry laboratory needed to test acetaldehyde (AA) on plastic (PET) preforms & bottled drinking water..

Closed

16-01109

Packaging and Labeling

Sensory and analytical chemistry laboratory needed for comparision testing vendor qualification of activated carbon to be used for odor absorption of odor-proof bags for transporting aromatic flowers. We are in the process of acquiring samples from various manufacturers, and would like a comparison of odor-adsorption done between them to see what best suits us. Because we are sourcing fabrics from overseas suppliers, we would also like to check if their self-reported benzene and carbon tetrachloride adsorption test results are as they claim.

Carbon tetrachloride and benzene adsorption tests with quantitative analysis. If possible, we would also be interested in testing the adsorption capacity of fabrics for aromatic terpenes, such as limonene , linalool, caryophyllene, myrcene, pinene, and humulene, and at multiple thicknesses/weaves.

Closed

16-01098

Packaging and Labeling

Polymer Laboratory needed for European Pharmacopoeia Testing of polypropylene resin to European Pharmacopoeia 3.1.3. Poliolefins test articles.

Closed

16-01097

Packaging and Labeling

Polymer laboratory needed to provide quotation for analysis of polypropylene resins intended for shelf life studies. Polypropylene is a thermoplastic mainly used in packaging materials/goods.

Closed

16-01083

Packaging and Labeling

ISTA certified packaging laboratory for carton testing of packaged furniture items, some of which will exceed 350 lbs.

Closed

16-01081

Packaging and Labeling

PACKAGING LABORATORY NEEDED FOR CHILD-SAFETY CAP TESTING

Closed

16-01006

Packaging and Labeling

Pharmaceutical company needs laboratory for Leak Testing for drug 10cc Lyophilized Vials

Closed

16-00974

Packaging and Labeling

Materials laboratory needed for Polypropylene testing in a plastic to determine:
Is the material Homopolymer or copolymer
Is there any fillers present (caliuim,talc? )
What is the izod
What is the melt Flow index

Closed

16-00872

Packaging and Labeling

Large company needs laboratory for water testing for purity

Closed

16-00859

Packaging and Labeling

Laboratory needed for DOT Jerrican (2.2-gallon portable fuel container) Testing per Department of Transportation (DOT) ?Subpart M: Testing of Non-Bulk Packaging and Packages CFR / I / C / 178 ? Specification of Packages, Sections 178.603, 178.604, 178.605, 178.606, 178.608 and 178.609

Closed

16-00850

Packaging and Labeling

Large consumer products company needs CPCB authorized materials laboratory for Plastic (Multi Layer Packaging) recyclability testing

Closed

16-00816

Packaging and Labeling

Packaging laboratory needed for leachables and extractables testing in LDPE and HM-HDPE polybags

Closed

16-00793

Packaging and Labeling

India Foodpackaging laboratory needed for testing printing inks for food packagingfor migration of TNPP in topline ink @20-30ppm (TNPP -TRIS NONYL PHENYL PHOSPHITE- CAS RN 26523-78-4).

Closed

16-00787

Packaging and Labeling

Packaging company needs plastics laboratory need Melt Flow Index and Density Testing of HDPE.

Closed

16-00771

Packaging and Labeling

Materials laboratory needed for PTFE (teflon) powder analysis to determine the level of any residual contaminants for filing a FDA GRAS notice . The detection method would have to be sensitive enough to show that the levels are <0.5 ppb . Please provide quote

Closed

16-00680

Packaging and Labeling

ISO/IEC 17025 Automotive Laboratory needed for General Motors Testing: Test for automotive GM14573, Global Performance Requirements for Labels.

Closed

16-00654

Packaging and Labeling

India NABL approved testing labs needed for testing flexible packaging and printed laminates

Closed

16-00621

Packaging and Labeling

Physical laboratory needed for Glass strength testing for food container. Glass shock testing for breakage.

Closed

Submit Packaging and Labeling Testing Requests for Packaging and Labeling testing and Packaging and Labeling Scientific Research