Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Optical Laboratories to perform their Optical Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Optical laboratory that would like more information on these Optical projects, please visit Register Laboratories or call toll free 1-855-377-6821.
Materials laboratory needed for determination of optical transmission characteristics of red plastic lens resin used in laser receiver products. The optical transmission characteristics are important for this part so that it can filter sunlight while passing near IR laser wavelengths.
The study involves determination of the total transmissibility vs. wavelength for various red plastic lens samples. The wavelength range of interest is roughly 250-1250 nanometers (in 1 nm increments) at a minimum. A report shall be provided that includes the following at a minimum, test lab name, test date, test equipment used, test specimen condition, and graphical results of the optical transmission range, minimally including 250-1250 nm in 1 nm increments, for each sample
Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to SAE J845 Class 1 . Recommended practice providing design guidelines, test procedures, and performance requirements for 360 degree optical warning devices and selective coverage defined as any light that provides greater coverage then 40 degrees left-to-right but less than 360 degrees. Intended for authorized emergency, maintenance and service vehicles. Lighting tested from 5 degrees upward to 5 degrees downward.
Large company needs Optical Properties of 1 cm lenses tested for the following: Transmittance, Comatic Aberration, Veiling Glare Index, Lens Flare, Ghost, Halo (ISO 9358-1994), Lateral Chromatic Aberration, Longitudinal Chromatic Aberration and Reflection Ratio. Vibration and mechanical shock testing plus abrasion and high pressure water spray testing.
Materials laboratory needed for NATO coatings testing of chemical agent resistant coating (CARC) to North Atlantic Treaty Organization NATO AEP 64 standard fo Performance Requirements for Paint Systems Resistant to Chemical Agents and Decontaminants, for the Protection of Land Military Equipment and 65 coded Standard, described as Performance Requirements and Test Method for Paint Systems Resistant to Chemical Warfare Agents, for new new coating project to:
Screening Test (Resistance to Tri-n-Butyl Phosphate) onAluminium Alloys: 2024-T3 unclad, 5083 and 7020-T8
Optical Characteristics: *Visual comparison of the colour of the paints *Specular Gloss *Colorimetry on Aluminium Alloy 5083 or 7020-T6 and Steel
Scratch Hardness on Aluminium Alloy 5083 or 7020-T6 and Steel
Flexibility (Cupping test) on Aluminium Alloy 5083 or 70
LONG-TERM TESTING Packaging Laboratory needed for packaging testing of In flexible packing materials like double laminated , triple laminated & other flexible packaging material for: Flex crush resistance Water vapor transmission rate Oxygen transmission rate Optical density Lamination bond strength
Lighting company needs optical laboratory needed for spectral transmittance measurement services. on quartz glass tubing 26mm I.D x 32mm O.D. (3mm wall thickness) and quartz glass plate (30mm width x30 mm length x2mm thickness) for measurement to verify the spectral transmittance. We are expecting the results to be similar to the pink line in the below graph so the equipment will need to be able to accurately measure in 200-400nm range. Please specify the estimated price and lead time for measuring each sample.
LEGAL Materials laboratory needed for measuring surface of a flexible thin film material to characterize a few topographical features such as surface roughness Ra.
Contact mode AFM testing in ambient; non-contact optical interferometric profilometer such as Wyko profilometer.
Capable to scan 200x200 um area of sample, with resolution down to 0.5 nm roughness for smoothest materials.
Pharmaceutical analytical chemistry laboratory needed for analysis for the Buprenorphine active pharmaceutical ingredient: 1) Test - Solution Method to be followed: Measure the colour of the solution using a suitable meter. It should not be more intensely coloured than Ph Eur reference solution B9. Retain the solution for determination of specific rotation. The solution should be clear and reasonably free from extraneous matter. 2) Test - Specific Optical Rotation Method to be followed: Measure the optical rotation of Solution S in a 2dm tube at 20°C. Calculate the specific rotation with reference to the dried substance. Specific rotation = rotation x 50 x 100 sample weight (g) x 2 x (100 ? LOD) 3) Test - Palladium Content Method to be followed: To be provided (ICP-MS method)
Optical Laboratory needed for ballistic visor testing Optic Distortion Test Luminous Transmittance Test Haze Resistance Test Refractive Test Prismatic Deviation Test
Optical Laboratory needed for eyeglass testing for the amount of green and blue light that can pass through the lenses used in our eyeglasses.
Optical Laboratory needed for Reflectance Testing. We want to find reflection coefficient measurement on silver coated mirrors that we produced.
Physical Laboratory needed for thermal and optical properties testing (absorptance/emittance) for a small electronics board (50 mm x 50 mm). The purpose of this test is to fully define the behaviour of the board as it is to be used in space operations.
Optical laboratory needed for filter and testing for optical light transmission density. Company has cracked 16Ømm x 1mm thick filter that is part of camera system in a tool pre-setter. The pre-setter uses a camera and a light source to measure what appears as a shadow on a monitor. The filter seems to reduce the intensity of the light reaching the camera. We do not have any specifications for the filter. The OEM says the camera and filter is obsolete and not available. We believe the filter is a neutral density filter. We used a variable neutral density 52Ø mm filter to verify that the camera was functional. It seems to need a very specific density setting. We would eventually like to get a matching replacement 16Ømm filter.
Canada optical laboratory needed to conduct light transmittance tests on two pairs of safety goggles, which claim to filter a specific spectrum of visible light. (Either Light Transmittance Testing or Colour Transmittance Testing may be appropriate).
Further samples may be provided in the future, if the testing is concluded successfully.
Optical Laboratory needed for UV Light transmission comparison testing of two Amber production vial produced by two different companies. Company's product is sensitive to UV light and vials need to allow less than 10% UV light.
North of Italy testing house (testing laboratory) needed for EN optical tests over a multi beam safety light curtain for industrial application according to Machiney Directive 2006/42/EC and standard EN 61496-2:2013
Physical Laboratory needed for Optical testing for quality inspection of optical components, such as lens and mirror for Focus length, surface optical quality etc.. 2-3pcs of samples
Optical laboratory needed for window testing: transmittance of two pre-calibrated magnesium fluoride windows can be implemented. We are looking for a transmittance reduction of <2%. The test is in the UV range. magnesium fluoride window #1: 130nm to 140nm magnesium fluoride window #2: 130nm to 180nm Could you please provide an estimate for the cost of testing per window and the expected length of time the test might take.
Physical Laboratory needed for Optical transmittance Transmittance testing of quantity = 2 (1.00" OD x 0.0275" Thk Diamond windows) for 400 - 700 nm and 7500 - 14000 nm bands.
USA FDA GMP pharmaceutical laboratory needed for electrochemical impedance spectroscopy and/or Raman optical spectroscopy. Specimens would be of various test fluids. Will require analysis of returned results.
Physical Optical Laboratory needed for transmittance measurements on an optical assembly. The assembly is 7" in diameter and 1" thick, with a clear aperture of 6", but we do not need to measure the entire aperture; spot testing is adequate. We are primarily interested in the region from 280 to 400 nm, but would like to test from 250 to 800+ nm.
Pharmaceutical analytical chemsitry laboratory needed for softgel testing for heavy metals and optical rotation
Northern California biochemical laboratory needed for formulation testing to Finalize chemically based optical sensor formulation for use in a disposable medical device and develop manufacturing specifications
USA Physical Laboratory needed for absorption and transmission testing of optics 4 -2" dia ZnSe lenses, polished and unpolished samples
USA physical laboratory needed for optic property testing. I need to test several samples for their absorbance and transmission.
Optical manufacturing company of ophthalmic lenses needs Texas materials laboratory for lens testing of UV-reactive coating for viscosity and water content.
Asia analytical chemistry laboratory needed for soap testing: Soap base analysis:
Composition, % ? Palm Oil + Palm Stearin : 80 Palm Kermel Oil : 20
Free Alkali, as NaOH, % ? 0.01% Max Moisture, % ? 14% Max Chlorides, as NaCl % ? 0.8 Max Total fatty matter, % ? 78.0 Min Chelating Agent, % ? TETRASODIUM EDTA : 0.0156 Odor : characteristic, similar standard Optical Brightness : Absent
chromatography, humidity, all using AOCS standards.
2. Glycerine analysis.
Physical and chemical parameters such as appearance, solubility, concentration, specific gravity, IR identification, chromatography, color, ignition residuals, water, chlorides, sulphide, heavy metals, chlorinate compounds, fatty acids, esters, diethylene glycol, ethylene glycol, purity, chloroform, dioxane, dichlorom
Europe Packaging Laboratory needed for Flexible Packaging testing - OPP-OPP o Chemical composition of the Material o Coefficient of friction (CoF) o Seal and Bond strength ( Foil ) o Sealing range ( Foil ) o Barriere properties guaranteed o Residues of solvents o Physical test o Optical test o Sensory test
USA Materials Lab needed for optical testing: materials characterization of room temperature surface reflectivity in the 0.3 nm to 3.0 nm wavelength range on a 0.5" or 1.0" diameter sample of Mo5Si3 with a borosilicate glass surface scale.
USA Materials Laboratory needed for ASTM Testing: Optical Testing of Thin film (0.15-.05mm) Need absorption testing covering UVA and the visible light spectrum Possibly also need luminous transmittance per ASTM D1003
Asia analytical chemistry laboratory for cosmetics testing for determining titanium dioxide in cosmetic products using inductively coupled plasma optical emission spectrometry (ICP-OES) or other methods or not. If yes, please let me know lead time, cost of testing and amount of sample you need.
Materials Laboratory needed for ASTM Testing of cable to ASTM E 162 / ASTM E 662 / SMP 800C: ASTM E 162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source / ASTM E 662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials/ SMP 800C Bombardier SMP 800-C Toxic Gas Generation
Contract Research Organization required for Oncology sample testing of below test 1.Specific optical rotation 2.Heavy Metals. 3.Residue on ignition.
Ontario Canada A2LA or ILAC Materials Laboratory needed for ASTM Testing: Material testing of automotive fasteners. Hardness testing rockwell c and others. Thread verification, plating thickness, chemical composition of metals and coatings. Salt spray testing. Tensile and shear. Optical comparator for dimensional. Gauge calibration and Gauge R&R.
Optical Laboratory needed for Optical Testing: European Standards Testing to DIN 5032 Part 7 Photometry; classification of illuminance meters and luminance meters
FDA cGMP pharmaceutical laboratory needed for analytical chemistry testing:
Identification by IR Identification by UV Moisture by Karl Fisher Assay by HPLC Nickel by Atomic Absorption Optical Rotation Refractive Index Viscosity ?Assay by Potentiometry Fatty acids by GC . ; ; etc
Large computer company needs Materials Laboratory for polymer testing: measuring the light transmission rate through a optical clear PMMA molded half ball lens at the wavelength 520-530nm. The half ball lens is 1.5mm diameter. Is it something the lab can measure? If yes, 1. Sample size minimum if any 2. Lead time 3. Cost 4. Any other requirements.
India analytical chemistry laboratory needed for HPLC analysis of optical brightner: Mobile phase : n-hexane:ethyl acetate =90:10
2 Wavelength : 365nm
3 Seperation column: silicagel column CLC-SIL 150X4.6mm 5um
4 Detactor : uv detector
5 Mashine : 1. liquid chromatograph ( Shimadzu )
2 . SPD-10AVP uv detector
Electrical Laboratory needed for Optical testing based on EN12966 Testing lumunance and contrast of emitted light (using LED's) within certain beam widths to determine gaps as compared to EN12966 specifications. EN12966 is an European Traffic display standard.
Materials Laboratory needed for optical testing: Optical transmission @ 185 nm of samples of fused quartz tubing.
Consumer Products Analytical Chemistry Laboratory needed for flouride testing of powder fluoride sample: OPTICAL & percentage elemental (ASSAY)analysis of fluoride samples. If it is possible then please let me know.
Composite company needs materials laboratory for toxicology, product safety and materials testing: fiberglass composite material, that requires specific ASTM standards and testing that is in accordance with document BSS-7239 BSS 7239 Recommended Fire Safety Practices for Rail Transit Materials Selection.E662-01, Optical Density of Smoke.
Australia electrical laboratory needed for optical testing of VMS sign design to comply with AS4852 the testing is detailed in the standard it is basically intensity and colour measurements.
Electrical Laboratory needed high frequency testing up to 20GHz, along with time domain testing of 10Gbps data rate for Active optical Cable assemblies (QSFP form factor) to be tested against the 40Gig Ethernet standard and infiniband QDR spec. appreciate the feedback if you are able to help with such testing.
Canada materials laboratory needed for physical Testing of lighting for physical and optical properties: Hardness, specific gravity, tensile strength, tensile elongation, flexural modulus, melt index, impact strengthOptical: transmission loss, refractive index, numerical aperture
Las Vegas Physical Laboratory needed for physical certification testing: drop ball testing for optical lenses 1.56 hard, AR coated lens
Certification Laboratory needed for ANSI certification compliance testing certify compliance with ANSI C12.18 American National Standard Protocol Specification for ANSI Type 2 Optical Port ANSI C12.19 SmartGrid/AEIC AMI Interoperability Standard Guidelinestogether with a smart meter.
Analytical chemistry laboratory needed for optical transmissivity testing to gnerate a chart of optical Transmissivity vs wavelength in the range of 0.5-1.8 micrometer for various liquids and plastic components.
India Optical Laboratory needed for testing of Optical radiation hazard with slit-lamp microscopes per iso 10939 section 4.4 and iso 15004-2) 1 sample
FDA GMP Physical laboratory needed for dimensional verification, force to fire testing, material hardness, etc. The equipment required would be the likes of calipers, optical comparators, Instron/RAM/Zwick... The product is a firing assembly for an auto injector.
I'd be happy to talk through what we are looking for, you can call me (215)-259-3592.
Physical Laboratory needed for durability testing on optical mirrors and Lens to confirm that they meet mil spec Mil c 48497A Mil c 48497A
Materials Laboratory needed for optical lens testing. We have 4 sample lenses to be tested. Desired tests are:
* Total percentage visible light transmission. * UV and visible spectrum transmission by wavelength. 5nm increments preferred but 10nm increments would be acceptable.
* Standards reports for ANSI 80.3-2001, EN 1836:2005, AS/NZS 1067:2003
USA optical laboratory needed for Spectral Characterization testing. a quick and dirty spectral response as a function of angle test on a detector. Is this a service you provide, and if so how much would this test cost?
The wavelength range we're interested in is 400-700 or so, and resolution isn't too important- 5nm or even 10nm steps would be more than good enough. As far as angular response we're looking for 10 degree increments from normal to 110deg.
New York or New Jersey Physical Laboratory needed for optical testing:Optical rotation ,refraction indice ,and percentage of sequiterpenes ,main components of amyris balsamifera from Haiti
FDA GMP Pennsylvania Physical Laboratory needed for FDA Testing: drop ball test for the optical lenses
UK physical laboratory needed for optical testing.. Compare light transmittance between two touch sensor variants.
Construction 1: 4mm plain glass 125µm PSA PET hard coat film AR film
Construction 2: 4mm AG glass 125µm PSA PET hard coat film
USA Optical Laboratory needed for mirror specular reflectance testing service.
1. Measure absolute specular reflectance at 45° AOI over the spectral range 430 - 1000nm for 5 locations on mirror 2. Part is a first surface mirror a. Size: 35 x 26 x 1.25 inches b. Weight approx. 30 lbs c. Backing material has screw holes for handling and mounting
Physical Laboratory needed for BS Safety hazard testing to BS EN 168:2002, Personal eye-protection. Non-optical test methods. Clause 16 and ISO 4855-1981(E), Clauses 3.1, 13, and 14
FDA GMP Optical Laboratory needed for plastics testing to determine ABBE number on a sample, sample is a thin circular plastic material.
Materials Laboratory needed for Optical Measurement Testing. Reflectivity value of plastic material solid surface, in visible spectrum
Plastic curtains and screens manufacturer that needs Optical Laboratory for AWS testing to AWS standard F2.3 determine how much light is passing through a welding curtain. The relevant standard is AWS standard F2.3. The test will require a spectrophotometer capable of reading transmittance from 200nm to 800nm. We need 2 to 5 samples tested."
India materials laboratory needed for option testing of Tempered Glass by optical and light
West Coast USA Mechanical Laboratory needed for Mechanical Strain Testing planar biaxial strain testing of thin film polymer specimens submerged in a saline solution. We are looking for the in-plane strain found through non-contact optical methods and the associated forces. There are about five different thin film membranes, each to be tested an appropriate sample-significant number of times.
Midwest optics laboratory needed for ASTM Testing to ASTM C770-98, Stress Optical Coefficient (aka Brewster's Factor) of a glass composition.
India FDA GMP and ISO analytical chemistry laboratory needed for quality control testing in pharma raw material, inprocess material, finished product. test names:1. hplc testing 2. g.c and optical rotation and moisturetesting,tlc testing 3.all types of tests of raw materialand in process material, finished product of drug material 4.physical chemical properties testing and limits testing 5. drug uniformity testing. 6.identification testing, chromato graphy testing, drug characterization testing ,thin layer chromatographic identification testing. 7.
US Optical Laboratory needed for ASTM Optical Testing: (Transmission, Reflectance,Haze) 5 samples
Asia sunglass distributor needs optical materials certification laboratory to verify sunglass lens meet CE standard or ANSI standards (Z80.3.2010). Please include requirements and quotation
India Metrology Laboratory needed for Non-destructive Calibration testing and on-going Calibration of optical micrometer by NIST certified lab
Solar Panel Company needs optical laboratory to measure total reflecting efficiency of the mirror.
India Pharmaceutical Laboratory needed for IP Testing: Specific Optical Rotation Testing of drug substance (1% solution of drug substance in water at 365 nm 25°C)
Materials, Optical Laboratory needed to test Index of refraction of glass plates IR - 1.517. The plates are from glass BK7 and are in the dimension of 70x70x1.5 mm (they can be cut to smaller size if needed). 1. Accuracy of measurement < 5x10-5
Contact Lens manufacturer needs basic benchtop toxicology testing, optical clarity testing, refractive index testing and oxygen permeability testing.
US Materials Laboratory needed for ANSI/ISO 5-3-1995 & ANSI/NAPM IT2.18-1995 (Photography Density Measurements Part 3: Spectral Conditions)ANSI/ISO 5-4-1995 & ANSI/NAPM IT2.17-1995 (Photography Density Measurements Part 4; Geometric Conditions for Reflection Density) Determination of optical density (reflected) for base membranes
ISO 17025 Laboratory needed for optical communication testing 1-SDH/SONET tests 1-1-bit eror rate 1-1-1-STM-1/OC-3 1-1-2-STM-4/OC-12 1-1-3-STM-16/OC-48 1-1-4-STM-64/OC-192 1-2-eye pattern analysis 1-2-1-eye crossing 1-2-2-eye amplitude 1-2-3-fall time 1-2-4-rise time 1-2-5-eye level 1-2-6-eye width 1-2-7-SNR 1-2-8-peak to peak jitter 1-2-9-eye opening 1-2-10-RMS jitter 1-2-11-optical modulation amplitude 1-2-12-eye height 2-enviromental tests 2-1-tempreture-humidity cyclic test 2-2-thermal shock 2-3-damp heat 2-4-dry heat 2-5-cold 3-optical loss tests 3-1-crosstalk(isolatin) 3-2-directivity 3-3-insertion loss 3-4-return loss 3-5-polarization dependent loss 3-6-polarization dependent return loss 3-7-wavelength dependent insertion loss 3-8-wavelength dependent return loss 4-gain tests 4-1-optical gain 4-
USA Bioanalytical Laboratory needed for Optical filter spectrum profile inspection Scan optical filter between 400-800nm. Focus on blocking wavelength area, It is about OD4 to OD6.
FDA GLP Analytical Chemistry Laboratory needed for Specific optical rotation testing
USA Analytical Chemistry Laboratory needed for USP analysis: Optical rotation of 2 water- soluble peptides
Optical Laboratory needed to test the refractive index of a new glass at 1550nm. The material is available in form of lens and can be available in blank if necessary.
Europe Analytical Chemistry Laboratory needed for AES testing for oils · metals elements (ICP): Fe, Cu, Cr, Pb, Ni, Al, Mo, Sn
· additives elements (ICP): B, Mg, P, Zn, Ba, Ca, S
· contaminants elements (ICP): K, Na, Si
PQ - Index
Viscosity in 40°C and 100°C
Colour Index - ASTM
Optical Partical Analysis + Cleanlines acc ISO 4406
Water Content by Carl Fisher
Total Acid Number
We assume that we'll analysis 20 samples per month.
FDA GMP Bioanalytical Pharmaceutical Laboratory needed for GMP peptide testing to determine temperature dependency on optical rotation at 20C and 25C
Eastern USA Optical Laboratory needed for IES light reflectance measurement testing as per IES RAL-LR95-1. The instrument used would be an electric Reflectometer on three units of the sample in accordance with the ASTM Standard Test Method for Light Reflectance of Acoustical Materials. The specimen is a 1" thick Tectum Panel painted white. The panel is nominally 0.60m (23.75 in) wide by 0.60m (23.75 in.) long and 25mm (1 in.)thick. The average weight of the specimen as measured was 8.5 kg/m2 (1.7lbs/ft2).
ISO Optical Materials Laboratory needed for ISO transmittance testing and specifications of amber, green bottles
Manufacturer of plastic curtains and screens that are used as safety welding screens in industrial environments needs Optical Laboratory to perform testing to determine how much light is passing through a welding curtain. The relevant standard is AWS standard F2.3. The test will require a spectrophotometer capable of reading transmittance from 200nm to 800nm. We need 2 to 5 samples tested.
China Optical Laboratory needed for Light Transmittance, Haze, Yellowness Index, and Ultra-Violet Light Absorption Testing on Greenhouse HDPE Tarps.
Ophthalmic Lens Coating Company needs Midwest USA Optical Laboratory for measuring reflectance (%R), at 45 degree AOI of a thin film coating on a (flat) glass witness sample. Within some portion of spectrum between UV to Near IR.
Hillsboro, OR Optical Laboratory needed to test light transmittance or solar module glass
Europe Consumer Products Safety Laboratory needed for testing Eco friendly detergents to ensure they don't contain hazardous chemical like phosphate, caustic, formaldehyde, enzyme, optical brightener ....It is biodegradable, natural, eco friendly ....friendly to the skin especially for baby and delicate skin..Laboratory should direct us for the most important test and claims.
California Bay Area Optical Laboratory needed for testing reflectivity measurements on flat, solid samples using a spectrophotometer (such as Cary 5000 or Perkin-Elmer). This would be contract measurement and we'd like to know prices, too.
Optical Laboratory needed for testing newly imported contact lenses from Korea for product safety. To include results of test into a certificate from the respective laboratories.
West Coast USA Optical Laboratory needed to measure the total reflectance from a single sample. The sample is coated metal, approximately 1in. x 2.5in. x 0.03in. The coating to be measured is on the large surface (not the edge). I would like a measurement scan from 350nm to 1050nm. As the coating appears uniform, the measurement spot diameter can be up to the full width (1 inch) of the sample or as small at 0.1inch; what ever is easiest to measure
Optical Laboratory needed for ASTM testing rolls of tape, adhesive to ASTM D 3359 ASTM D 3359 adhesive requirements of ASTM D 3359.
USA Optical Laboratory needed for Fluorescent Imaging testing of thin coatings. Thickness measurements would be desired.
Taiwan or China Optical Laboratory needed for LCD Testing, luminance measurements of LCD panels using a spectroradiometer (basic luminance meter is not good enough)
Optical Laboratory needed for sub arc angle deviation testing - Mini Penta Prism 90º+/-3 arc sec.
Preclinical Contract Research Organization needed for testing the effect of drugs in development for lowering IOP and protecting the optical nerve in rodent models for Glaucoma
Optical Laboratory needed for measurement the light transmission of four samples of PMMA acrylic panels in accordance to BS EN 2155-5.
USA Optical Laboratory required to conduct contract testing of contact lenses. We have some sample soft disposable lenses which we need tested for sterility, stability, and quality (verification of power/dimensions, etc.).
India Physical Laboratory needed for Glass Testing: Optical testing, Toughness testing, Transperecny testing, Magnification etc
Europe physical laboratory needed for EN 15152 Testing of Windscreen for HSR. All optical and physical tests required in EN 15152:2007. Except impact test.
USA Materials needed for ASTM Testing, Extended (up to 2 weeks) testing to ASTM D3616-95 followed by optical dimensional measurement.
Optical Laboratory needed for testing optical properties: 1.) Transmissitivity (Direct and Diffuse) of a Sample 2.) Absorptivity of a Sample 3.) Reflectivity of a Sample 4.) Transmissivity Spectrum (300nm -1100nm) of a sample.
Optical Laboratory needed for REALD testing of circular polarized lens Film to make 3D glasses. We are looking for a testing house to perform 3rd party tests on the material, so that it can pass REALD specifications before it arrives at our frame manufacturer.
Materials Laboratory needed for ASTM Testing, ASTM F 801 Optical Deviation testing of Transparent Parts
USA Analytical Chemistry Laboratory needed for Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES)Phosphorus %
ISO 17025 Materials Laboratory needed for Optical Distortion, Deviation, Luminous Transmittance, Haze and NVG weighted transmittance. SAmples will need high / low temp, and humidity conditioning.
ASTM Environmental or Optical Laboratory required for ASTM C1549 - 04 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
Optical Laboratory required to test laser - need to measure and supply us a wavelength verification report. The device we are measuring is a 2790nm device.
USA ISO 13468-Optical Laboratory needed for Optical transmittance of PMMA, 6 pcs., 35.00mm diameter x
USA MIL-C-48497A Thermal Optical Laboratory required for optical transmission testing and environmental testing performed on ASE filters. wavelengths from 350 to 1100 nm. Filters have OD>5 for some wavelengths and transmission > 90% at other wavelengths. Need Environmental tests performed per MIL-C-48497A
USA Materials/Toxicology Laboratory needed for testing fiberglass duct liner material: Specific Optical Density ASTM E662; Flammability ASTM E-162; Fire Gas Toxicity Pittsburg Method; Water Repellency IST 80.6-92; Acute Inhalation Toxicity of Thermal Degradation-NYS Modified Pittsburg Protocol
Food Packaging Laboratory needed for testing food packaging for MOISTURE, LEAD MIGRATION, CHARGED SUBSTANCES, SUBSTANCES INSOLUBLE IN WATER AND SOLVENT (NITROGEN COMPOUNDS) WATER SOLUBLE SUBSTANCES SUBSTANCES SOLUBLE IN ETHANOL-BENZENE MIXTURES TOTAL STARCH COLOPHONY AND TOTAL DERIVATES TOTAL POLYCHLOROBIPHENYLS (PCB) FIBROUS SUBSTANCES (CALC.) SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIMULANT WATER AFTER 24 HOURS SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIMULANT ACETIC ACID AFTER 24 HOURS SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIMULANT OLIVE OIL AFTER 24 HOURS SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIMULANT SALIVA AFTER 24 HOURS ANALYSIS ON PAPER - other tests
ISOPROPILTHIOXANTONE (ITX) FORMALDEHYDE SPECIFIC MIGRATION PHTHALATES (RES.) (HIGH SENSITIVITY) DI(2
Food packaging paper mfg needs EUROPE FOOD PACKAGING TESTING: MOISTURE, LEAD MIGRATION CHARGED SUBSTANCES SUBSTANCES INSOLUBLE IN WATER AND SOLVENT (NITROGEN COMPOUNDS) WATER SOLUBLE SUBSTANCES SUBSTANCES SOLUBLE IN ETHANOL-BENZENE MIXTURES TOTAL STARCH COLOPHONY AND TOTAL DERIVATES TOTAL POLYCHLOROBIPHENYLS (PCB) FIBROUS SUBSTANCES (CALC.) SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIMULANT WATER AFTER 24 HOURS SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIMULANT ACETIC ACID AFTER 24 HOURS SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIMULANT OLIVE OIL AFTER 24 HOURS SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIMULANT SALIVA AFTER 24 HOURS ANALYSIS ON PAPER - other tests ISOPROPILTHIOXANTONE (ITX) FORMALDEHYDE SPECIFIC MIGRATION PHTHALATES (RES.) (HIGH SENSITIVITY) DI(2-ETHYLHEXYL) PHTHALATE BUTHYLBENZIL
USA A2LA Materials Laboratory needed for ASTM Optical Testing for 9 armor glass windows 12 X 24 X 3 inches that need Optical Deviation (ASTM F 801-96 Referance I) Optical Distortion (ASTM F 2156-06 Referance m) and Haze Test (ASTM FD 1003 Referance K).
Dubai or UAE Product Safety Laboratory needed for full RoHs Testing with flame retardent PBB & PBDE. I also need the testing of Phthales in Optical disc.
ISO/IEC 17025 Optical Materials Laboratory required for laminated glass to be tested for optical deviation in accordance with ASTM F801-96. Can ship our product anywhere to be tested.
USA Materials Laboratory required for Optical Testing. I work for a military communications equipment manufacturer and we are designing a new product that has a custom display window. We are concerned about the sunlight readability of said display through the window and are looking for someone to do some optical testing (reflection and transmission). We have very limited experience in this field so we are looking for someone with expertiese to assist in this process.
India Electrical Laboratory needed for Electrical Testing of Optical Fiber Cables, Joint Enclosures and Splitters.
Eastcoast USA Metallurgical Laboratory needed to accurately tensile test fine diameter wire with an optical extensometry system.
Optical Laboratory needed for ASTM Testing for Optical Deviation to ASTM F801-96, Optical Distortion to ASTM F2156
Optical Laboratory needed for UV-Vis Transmission testing of film samples between (240 - 700) nm
Materials Laboratory needed to measure the optical transmission and absorption of clear polyurethane sheet
FDA GMP/GLP Materials Laboratory needed for ISO long-term optical stability testing of a fluorescent plastic. Are fluorescence properties going to change over time, and if so, how much? So, at a minimum, I think I'm interested in discoloration, transmittance, optical, and stability testing. Would like to know more about these methods, and if others might be appropriate/more appropriate.
Optical Lab needed to determine the UV transmission of various coatings applied to a glass substrate.
Bioanalytical laboratory neeeded for conducting Erythromycin Biological Potency Assay, Erythromycin A, B and C, Optical rotation, pH, Moisture, Ash, Sulfocyanate
FDA GMP Analytical Chemistry laboratory needed for optical rotation in methanol testing
ISO Physical Analytical chemistry laboratory in USA needed for ASTM optical quality testing of injection molded plastic lens - Luminous Transmittance Percentage, Haze Percentage, Flatness
Experienced Cosmetics laboratory needed for testing on hair fibers including mechanical properties, optical properties, color, weathering, and any other testing available.
GMP Analytical Chemistry Laboratory needed for optical rotation, elemental analysis (C, H, O, N, S)
Physical laboratory needed for ASTM Optical fiber testing in Temperature Humidity Cycling chamber in which tamperature varies from -10 to +85 degree celcius & Relative Humidity i.e. RH varies from 0% to 95%
Optical laboratory needed for reflectivity measurement - spectrophotometer 350-1600nm
index of refraction, scratch dig, dimensions, angles, and p-v wavefront for a transmissive plano-optic
we need to verify the specific rotation (observed angle of FDA cGMP, GLP analytical chemistry laboratory needed for testing optical rotation of plane polarized light of several API's in solution in order to verify enantiomeric excess and purity
Materials laboratory needed for testing specific Optical Rotation for compound of Molecular wt 350 & sample availability of 3-4 mg
Optical laboratory needed for testing % transmittance through clear and coated fused silica. Coated would be less than 0.1% transmittance.
FDA GMP analytical chemsitry laboratory needed testing Optical Rotation of Dextromethorphan HBr according to USP monograph ( I.D. "A" )
Physical optical laboratory needed for photometric testing (flux, intensity, colorimetry) of LEDs.
Microscopy and Imaging Laboratory for petrography and optical determination of heavy mineral grains
Physical and optical laboratory needed for testing for illumination and color of keypads when put into assemblies.
FDA cGMP laboratory needed for ORD Optical Rotatory Dispersion of synthetic high purity peptide samples. Repeat analysis of cGMP material needed.
Pharmaceuticals analytical chemistry and microbiology laboratory needed for European Pharmocopeia testing of granulated sugar Description, Identifacation, Appearance of Solution, Conductivity, Specific Optical Rotation, Color Value, Dextrines, Lead, Reducing Sugars, Loss on Drying, Sulphites, Bacterial Endotoxins and any other test required under sucrose in EP
Physical laboratory needed for determination of light transmittance of an optical lens manufactured from crystal polystyrene. Must be able to meet a minimum specification of 90%.
FDA GMP and ISO Analytical Chemistry laboratory needed for particle size testing using (Hiac royoco counter sizer, Malvern Master sizer, optical microscope, XRPD testing and thermal analysis(DSC,TGA, hot stage microscopy)...
ISO physical laboratory needed for optical testing to measure spectral transmittance of camera lens.
Large company looking for mechanical and analytical laboratory for sizeable account. Testing includes Atomic Force Microscopy (AFM), Auger Spectroscopy, Boroscopy, Capillary Electrophorses (CE), Chemical Imaging Microscope (Fluorescence), Composite Layup Sequencing, Contact Angle Goniometry, Dektak Profilometer, Dynamic Light Scattering, Dynamic Tear test, Energy Dispersive X ray Spectroscopy (EDS, Fiber Matrix Void Volume Fractions, Fractographic Examination (optical) and Scanning Electron Microscopy, Fracture Mechanic, Friction, Metallography, Nuclear Magnetic Resonance Spectroscopy (NMR), Optical and Video Microcopy, Raman Spectroscopy, Scanning Electron Microscopy (SEM), Secondary Ion Mass Spectroscopy (SIMS), Wavelength Dispersive X-ray Spectroscopy (WDS), X-ray diffraction (XRD)and X-ray Photoelectron Spectroscopy (XPS)
Imaging of glass micro structures with dynamic range of 10 to 1000 microns. Tclear glass is 60 mm cube but having small defects then need to imaged and measured. typical defect size and spacing between defects from multiple views. I also need to obtain digital optical images
USA optical laboratory needed for need to light testing the light power and frequency of light output from a small molded light pipe
USA analytical chemistry laboratory needed for GCMS testing of essential oils and physical testing (refractive index, specific gravity and optical rotation). What are your fees for these services?